ADL 915 Mineral And Synthetic Lubricants Summary
User Manual: ADL 915
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
Mineral and Synthetic Lubricants Summary Mineral Lubricants Viscosity Grade Application Product Name TBN mg KOH/g SAE ISO Pour Point C° Specific Gravity Slow-Speed Cylinder Oils Mobilgard™ 525 25 50 — -9 0.909 This premium-quality cylinder oil is designed for slow-speed engines operating on 0.10 percent sulphur fuels. It enables vessel operators to meet 2015 ECA sulphur requirements without compromising on engine protection and performance. Mobilgard™ 560 VS 60 50 — -20 0.922 This product delivers outstanding performance for engines operating under extreme conditions and burning fuel with sulphur levels as low as 0.5 percent and as high as 4 percent. Mobilgard™ 570 70 50 — -9 0.937 This premium quality, extra-high performance marine diesel engine cylinder oil provides maximum protection from adhesive and corrosive wear at the higher operating temperatures and pressures of today’s modern slow speed engines. Mobilgard™ 5100 100 50 — -24 0.953 This premium quality, extra-high performance marine diesel engine cylinder oil is designed to help combat the effects of cold corrosion on liner walls. It offers outstanding performance at the elevated peak firing pressures and liner temperatures found in modern marine two-stroke engines. MAN Diesel & Turbo recommends 50 SAE, 100 BN cylinder oil for Mark 8.1 and later engine designs when burning high sulphur residual fuel. Slow-Speed System Oil Mobilgard™ 300 C 9 30 — -24 0.867 This premium quality system oil is specially formulated to provide superior engine cleanliness, better wear protection and longer oil life when compared with conventional system oils. Medium-Speed Engine Oils Mobilgard™ 450 NC 13 40 — -6 0.897 These non-zinc, non-chlorine lubricants are specifically formulated to meet requirements of EMD engines using distillate fuels. Mobilgard™ 410 NC 10 40 — -18 0.894 This advanced lubricant was developed to help optimise the performance of engines that meet Tier IV emission requirements. Mobilgard™ 312 Mobilgard™ 412 15 15 30 40 — — -9 -9 0.896 0.899 These high-performance diesel engine oils for trunk piston engines operating on low-sulphur distillate fuels provide excellent resistance to oxidation and viscosity increase over a long period of service, superior water separating properties and excellent corrosion protection. Mobilgard™ ADL 30 Mobilgard™ ADL 40 12 12 30 40 — — -30 -21 0.889 0.892 These high-performance increased dispersancy engine oils for high BMEP medium- and high-speed diesel engines operating on distillate and MDO fuels provide increased resistance to cylinder liner lacquer formation in severe service applications, and assist in sludge and deposit removal. Product Characteristics/Applications Medium-Speed Engine Oils (continued on next page) For more information, please contact your local marine fuels & lubricants representative, or visit exxonmobil.com/marine. Page 1 of 6 Mineral Lubricants (continued) Viscosity Grade TBN mg KOH/g SAE ISO Pour Point C° Specific Gravity Application Product Name Medium-Speed Engine Oils (continued) Mobil Delvac™ 1630 Mobil Delvac™ 1640 12 12 30 40 — — -30 -21 0.889 0.892 These extra-high performance diesel engine oils provide exceptional performance in both modern diesel engines as well as older models. They provide increased resistance to cylinder liner lacquer formation in severe service applications, and assist in sludge and deposit removal. Mobilgard™ M330 Mobilgard™ M430 Mobilgard™ M440 Mobilgard™ M50 30 30 40 50 30 40 40 40 — — — — -6 -6 -6 -6 0.907 0.907 0.915 0.922 These extra-high performance engine oils for the most severe residual-fuelled medium-speed diesel applications provide outstanding residual fuel compatibility, excellent high temperature oxidation and thermal stability, low volatility, high load carrying properties and corrosion protection. Mobil Delvac MX™ Mobil Delvac MX™ F2 Mobil Delvac™ 1300 Super 9 12 10.5 15W-40 15W-40 15W-40 — — — -30 -30 -30 0.879 0.879 0.876 These extra-high performance multi-grade diesel engine oils help extend engine life in some of the most severe applications whilst delivering outstanding performance in high-output, low-emission engines. Fully backwards compatible, the oils will also deliver the same exceptional performance in older conventional engines. Mobil Delvac™ CNG/LNG 6.4 15W-40 — -27 0.871 This high performance heavy duty engine oil is formulated specifically for spark ignited CNG and LNG fueled engines. It provides excellent performance in the challenging operating environments presented by CNG (Compressed Natural Gas) and LNG (Liquefied Natural Gas) and offers extended drain interval capability. Hydraulic Oils Mobil DTE 10 Excel™ 15 Mobil DTE 10 Excel™ 22 Mobil DTE 10 Excel™ 32 Mobil DTE 10 Excel™ 46 Mobil DTE 10 Excel™ 68 Mobil DTE 10 Excel™ 100 Mobil DTE 10 Excel™ 150 — — — — — — — — — — — — — — 15 22 32 46 68 100 150 -54 -54 -54 -45 -39 -33 -30 0.8375 0.8418 0.8468 0.8502 0.8626 0.8773 0.8821 These high-performance anti-wear hydraulic diesel oils are specifically designed to meet the needs of modern, high-pressure, marine hydraulic systems. Circulating Oils Mobil DTE™ Oil Light Mobil DTE™ Oil Medium Mobil DTE™ Oil Heavy Medium Mobil DTE™ Oil Heavy — — — — — — — — 32 46 68 100 -18 -15 -15 -15 0.850 0.860 0.870 0.880 These premium-performance circulating lubricants are designed for marine applications where long lubricant service life is required. Mobil Vacuoline™ 528 Mobil Vacuoline™ 533 — — — — 150 220 -21 -15 0.890 0.890 These high-performance heavy-duty circulating oils are designed for lubrication of circulation systems of marine gearboxes, hydraulic systems, plus a wide variety of ancillary equipment. Gear Oils Mobilgear™ 600 XP 68 Mobilgear™ 600 XP 100 Mobilgear™ 600 XP 150 Mobilgear™ 600 XP 220 Mobilgear™ 600 XP 320 Mobilgear™ 600 XP 460 — — — — — — — — — — — — 68 100 150 220 320 460 -27 -24 -24 -24 -24 -15 0.880 0.880 0.890 0.890 0.900 0.900 These extra-high performance gear oils for enclosed gear applications provide maximum wear and corrosion protection whilst maintaining compatibility with common gearbox seal materials. Refrigeration Oil Mobil Gargoyle™ Arctic Oil 300 — — 68 -42 0.910 This high-performance mineral oil for reciprocating refrigeration compressors has a low pour point and excellent fluidity at very low temperatures by virtue of being almost wax-free. High-Speed Engine Oils For more information, please contact your local marine fuels & lubricants representative, or visit exxonmobil.com/marine. Product Characteristics/Applications Page 2 of 6 Mineral Lubricants (continued) Viscosity Grade TBN mg KOH/g SAE ISO Pour Point C° Specific Gravity Application Product Name Air Compressor Oil Mobil Rarus™ 427 — — 100 — 0.879 This premium-performance ashless air compressor lubricant provides exceptional equipment protection and reliability for single, two or multi-stage compressors operating under mild to severe conditions. The oil is not intended for breathing apparatus compressors. Cedervall-type Stern Tube Lubricant Mobil Stern Tube Lubricant™ — — — 10, max 0.915 This high-performance, high viscosity lubricant is for Cedervall-type stern tube bearings used in ships and for certain bearings of ships’ fin stabilizers. It provides effective rust protection in the presence of seawater and is resistant to water-washing so that corrosion protection is maintained for extended periods under severe operating conditions. Wire Ropes & Chains Mobilarma™ 798 This product forms a grease-like film that protects wire ropes from corrosion tendencies of salt spray and moisture-laden atmospheres. It is effective in extremes of temperature that may be encountered at sea and protects against mild acids. Grease Mobilgrease™ XHP Series This extra-high performance NLGI grade 2 grease is for a wide variety of applications and severe operating conditions. It was designed to outperform conventional products by applying leading edge, proprietary, lithium complex manufacturing technology. It is an ideal choice for severe operating conditions including high temperature, water contamination, high loads and shock loading, and extended re-lubrication operations. Open Gear Systems Mobiltac™ 375 NC This extra-high performance non-chlorinated, diluent-type lubricant for slow-moving, heavily loaded open gears adheres strongly to gear teeth and other machine elements to resist excessive throw-off. It resists rain, snow and water-washing. Heat Transfer Oil Mobiltherm™ 605 This high-performance product for closed indirect heating installations is resistant to thermal cracking and chemical oxidation. It can be pumped readily at both start-up and operating temperatures. The oil is thermally stable and capable of an extremely long service life without deposit formation or viscosity increase. For more information, please contact your local marine fuels & lubricants representative, or visit exxonmobil.com/marine. Product Characteristics/Applications Page 3 of 6 Synthetic Lubricants Viscosity Grade TBN mg KOH/g SAE ISO Pour Point C° Specific Gravity Application Product Name VGP Approved Hydraulic Oils Mobil SHC Aware™ H 32 Mobil SHC Aware™ H 46 Mobil SHC Aware™ H 68 — — — — — — 32 46 68 -30 -30 -30 — — — These high-performance, anti-wear hydraulic oils for modern high-pressure hydraulic systems meet or exceed the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for “environmentally acceptable lubricants.” The products’ excellent wide temperature-range performance is above and beyond the capabilities of non-synthetic environmentally acceptable oils. VGP Approved Stern Tube Oils Mobil SHC Aware™ ST 100 Mobil SHC Aware™ ST 220 — — — — 100 220 -24 -12 — — These high-performance, emulsifying stern tube oils for marine stern tube systems meet or exceed the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for “environmentally acceptable lubricants.” The products provide effective rust protection in the presence of seawater and the lubricating film is resistant to water washing so that corrosion protection is maintained for extended periods under severe operating conditions. VGP Approved Grease Mobil SHC Aware™ Grease EP 2 — — 150 — — This high-performance synthetic grease for environmentally sensitive applications meets the requirements of the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP). The grease is readily biodegradable and virtually non-toxic, and is formulated based on biodegradable saturated ester-base oils and a lithium/calcium soap thickener. It does not emulsify and has excellent water wash and salt water corrosion resistance. VGP Approved Gear Oils Mobil SHC Aware™ Gear 68 Mobil SHC Aware™ Gear 100 Mobil SHC Aware™ Gear 150 — — — — — — 68 100 150 -36 -36 -30 — — These high performance, anti-wear gear oils are for use in marine applications and meet the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for “environmentally acceptable lubricants”. They provide excellent wear protection for gears and bearings and safeguard equipment from rust and corrosion. Medium-Speed Engine Oil Mobilgard™ 1 SHC 15 40 — -54 0.872 This supreme-performance, synthetic diesel engine oil is recommended for use as a crankcase lubricant in medium- and high-speed marine diesel engines in severe service. It is especially suited to the needs of high-power concentration engines where thermal stress and loading on the lubricant are severe, and for applications involving low-temperatures, frequent start-up, rapid loading following rapid start-up, and abrupt shutdown after high-speed operations. High-Speed Engine Oils Mobil Delvac 1™ SHC 16 5W-40 — -54 0.860 This supreme performance, synthetic diesel engine oil provides excellent lubrication, including long drain capability and long engine life, for diesel engines operating in some of the most severe marine applications. Mobil Delvac 1™ 12 5W-40 — -45 0.854 This fully synthetic supreme performance heavy-duty diesel engine oil helps extend engine life whilst providing long drain capability and potential fuel economy for modern diesel engines operating in some of the most severe marine applications. Mobil Delvac 1™ LE 5W-30 10 5W-30 — -51 0.855 This synthetic, heavy-duty oil offers excellent wear protection for modern low emission diesel engines. Mobil Delvac 1™ ESP 10.1 5W-40 — -48 0.85 This fully synthetic supreme performance heavy duty diesel engine oil helps extend engine life while providing long drain capability and potential fuel economy for modern diesel engines operating in severe applications. For more information, please contact your local marine fuels & lubricants representative, or visit exxonmobil.com/marine. Product Characteristics/Applications Page 4 of 6 Synthetic Lubricants (continued) Viscosity Grade TBN mg KOH/g SAE ISO Pour Point C° Specific Gravity Application Product Name Air Compressor and Turbocharger Oils Mobil Rarus™ 824 Mobil Rarus™ 827 Mobil Rarus™ 829 — — — — — — 32 100 150 -54 -36 -40 — — — Mobil SHC™ Rarus 32 Mobil SHC™ Rarus 46 Mobil SHC™ Rarus 68 — — — — — — 32 46 68 -42 -42 -39 0.8779 0.8676 0.865 Product Characteristics/Applications These ultra-high performance synthetic oils are for use in severe-duty reciprocating air compressors. The products’ outstanding oxidation and thermal stability help to make them ideal for use in applications where high temperatures are encountered and extended oil drains are desired. These supreme-performance oils are primarily intended for the lubrication of severe-duty rotary screw and vane air compressors. The products’ excellent wear protection and outstanding resistance to oxidation and thermal degradation are greatly superior to mineral oils. Mobil SHC Rarus 68 is approved by ABB Turbo Systems for oil-change intervals that are five times beyond those permitted with standard mineral oils. Mobil Rarus SHC™ 1026 — — 68 -45 0.856 Mobil Rarus SHC 1026 is approved by ABB Turbo Systems for oil-change intervals that are five times beyond those permitted with standard mineral oils. Gas Compressor Oil Mobil™ Gas Compressor Oil — — — -36 1.056 This high-performance, synthetic gas compressor lubricant is primarily intended for use in gas compressors for hydrocarbon and chemical gases where the crankcases and bearings operate in a gas filled atmosphere. It is particularly suitable for marine service on vessels carrying liquefied gas cargoes. Refrigeration Compressor Oils Mobil Gargoyle™ Arctic SHC 226E Mobil Gargoyle™ Arctic SHC 230 — — — — 68 220 -50 -39 0.830 0.850 For reciprocating and rotary refrigeration compressors. Wax-free, high V.I. Reduced deposits due to high-temperature stability. Mobil EAL Arctic™ 32 Mobil EAL Arctic™ 46 Mobil EAL Arctic™ 68 Mobil EAL Arctic™ 100 Mobil EAL Arctic™ 220 — — — — — — — — — — 32 46 68 100 220 -48 -42 -36 -30 -21 0.980 0.970 0.960 0.960 0.960 These high-performance, fully-synthetic Environmental Awareness Lubricants (EAL) are designed specifically for refrigeration compressors and systems using ozone-friendly HFC refrigerants. Mobil Zerice™ S 68 Mobil Zerice™ S 100 — — — — 68 100 -27 -27 — — Mobil SHC™ 626 Mobil SHC™ 629 Mobil SHC™ 630 Mobil SHC™ 632 Mobil SHC™ 634 — — — — — — — — — — 68 150 220 320 460 -48 -45 -42 -40 -40 0.860 0.860 0.870 0.870 0.870 These optimum-performance synthetic oils for gears and bearings provide outstanding performance in extreme operating conditions at high and low temperatures — well beyond the capabilities of standard mineral oils. The products’ balanced formulation also provides exceptional resistance to rust and corrosion, excellent demulsibility, and superb foam control and air-release properties, all of which help to ensure problem-free operation. Mobil SHC™ Gear 150 Mobil SHC™ Gear 220 Mobil SHC™ Gear 320 — — — — — — 150 220 320 -54 -45 -48 0.860 0.860 0.860 These supreme-performance fully synthetic gear oils help extend gear and bearing life in enclosed gear drives operating under extreme conditions of load, speed and temperature. Mobilgear SHC™ MT 68 — — 68 -51 0.855 This premium-performance, fully synthetic marine gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions. It is recommended for enclosed marine gear drives, including steel-on-steel spur, helical and bevel gears. Gear Oils These premium-quality synthetic refrigeration compressor lubricants have superior miscibility with R22, R502 and R12. The products can be used in temperature applications down to -60°C. For more information, please contact your local marine fuels & lubricants representative, or visit exxonmobil.com/marine. Page 5 of 6 Synthetic Lubricants (continued) Viscosity Grade Application Product Name TBN mg KOH/g SAE ISO Pour Point C° Specific Gravity Hydraulic Oils Mobil SHC™ 524 Mobil SHC™ 525 Mobil SHC™ 526 — — — — — — 32 46 68 -56 -54 -53 0.852 0.851 0.853 These optimum-performance synthetic oils for vane, piston, and gear pumps are designed to provide excellent wear protection in a wide range of temperatures. Exhibiting outstanding oxidation and shear stability, excellent rust and corrosion protection, demulsibility, and keep-clean performance, the oils help extend the service life of machine components. Gas Turbine Oil Mobil Jet™ Oil II — — — -59 1.0035 This aircraft-type gas turbine lubricant is approved against the Standard Performance (STD) classification of U.S. Military Specification MIL-PRF-23699. It is recommended for aircraft-type gas turbine engines used in marine applications. Grease Mobilith SHC™ 100 Mobilith SHC™ 460 Product Characteristics/Applications These supreme-performance greases are designed for a wide variety of applications at extremes of temperature. The products’ lithium complex thickener contribute excellent adhesion, structural stability and resistance to water. For more information, please contact your local marine fuels & lubricants representative, or visit exxonmobil.com/marine. Copyright © 2016 Exxon Mobil Corporation. All rights reserved. All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless otherwise noted. EMM-MSL-0216 Page 6 of 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Language : en-GB XMP Toolkit : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19 Instance ID : uuid:67e8e08d-5715-bb44-94ae-0a37ae85d0c8 Original Document ID : adobe:docid:indd:e93e9a70-a45b-11e1-bc51-f43e56f2214e Document ID : xmp.id:e3015e29-24f8-4dc4-adec-137ce1f9d32d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:4d710ec0-caf8-4980-a028-138231815063 Derived From Document ID : xmp.did:ccef390f-e221-49dc-8170-bc6992746c7b Derived From Original Document ID: adobe:docid:indd:e93e9a70-a45b-11e1-bc51-f43e56f2214e Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:09:20 09:41:17+01:00 Create Date : 2016:09:20 09:41:17+01:00 Modify Date : 2016:09:20 09:41:22+01:00 Metadata Date : 2016:09:20 09:41:22+01:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 6 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools