STM32 ARDUINO MAPLE BOARD Olimexino

User Manual: olimex -

Open the PDF directly: View PDF .
Page Count: 16

Scroll down to view the document on your mobile browser.

Status Led with name LED1 (green) connected via jumper LED1_E to STM32F103RBT6 pin 21 (PA5/SPI1_SCK/ADC5) – signal D13(SCK/LED1).
- Status Led with name LED2 (yellow) connected to STM32F103RBT6 pin 15 (PA1/USART2_RTS/ADC1/TIM2_CH2) – signal D3(LED2).
- Power-on LED (red) with name PWR_LED – this LED shows that the board is power supplied.

Navigation menu