NT100 Pll 2530
User Manual: NT100
Open the PDF directly: View PDF 
.
Page Count: 8
Eaton® Weatherhead® Heavy Duty Parts Guide
2EATON Weatherhead Heavy Duty Parts Guide W-HYOV-MR002-E1 May 2014
H425 High Pressure Hose
SAE 100R2 Type AT, ABS
H430 High Pressure Spiral Hose
SAE 100R12, EN856 Type R12, DIN856/4SP
Performance (sizes -8 thru -16), ABS
REFUSE/SEVERE SERVICE
H245 High Pressure Hose
SAE 100R16, ABS
Nitrile blend inner, Neoprene cover
Reinforcement: 2 Steel Braids
Temp. Range: -40°C to +100°C (-40°F to +212°F)
Generic hydraulic fluids and diesel fuel high pressure applications.
Hose Length Example H24504, H24504-250R, H24504-500R
Compatible Hose Ends: C-O-C: 'S', 'U', 430 'U' and 'Z' Series
Nitrile inner, Neoprene cover
Reinforcement: 2 Steel Braids
Temp. Range: -40°C to +100°C (-40°F to +212°F)
High pressure applications, lines on off-road,
construction and farm equipment, etc.
Hose Length Example: H42504, H42504-250, H42504-500R
Compatible Hose Ends: C-O-C: 'S', 'U', 430 'U' and 'Z' Series
Field Attachable: 425 'N' Series
Synthetic Rubber Tube and Cover
Reinforcement: 4 Spiral Steel Plies
Temp. Range: -40°C to +127°C (-40°F to +260°F)
For very high pressure hydraulic lines
subjected to pressure surges and flexing.
Hose Length Example: H43008, H43008-100, H43008-150
Compatible Hose End: 430 'U' Series, no Skive
Hose Fitting Reference
‘U’ Series
430 ‘U’ Series
Used for very high pressure hydraulic lines
subjected to pressure surges and flexing.
Z Series
Coll-O-Crimp
Eaton designs and manufactures products that are engineered to provide reliability and longer service life for higher pressure requirements in today’s
severe service environment. Weatherhead’s Diamond Advantage core hydraulic hose products have been designed to meet these needs.
H280 WeatherSHIELD™ Hose
SAE 100R16 Type S, EN857 2SC, ISO
11237-1 Type 2SC Performance, ABS
Synthetic rubber inner, WeatherSHIELD cover
Reinforcement: 2 Steel Braids
Temp Range:
Petroleum-based: -40°C to +127°C (-40°F to +260°F)
Water-based: -40°C to +70°C (-40°F to +158°F)
For use with general petroleum and water-based fluids.
Hose Length Example: H28004, H28004-250R, H28004-500R
Compatible Hose Ends: 'Z' Series
Part # I.D. Working Press
H24504
1/4
5,000 psi
H24506
3/8
4,000 psi
H24508
1/2
3,500 psi
H24510 5/8 2,750 psi
H24512
3/4
2,250 psi
H24516
1
2,000 psi
H24520
1-1/4
1,625 psi
Part # I.D. Working Press
H28004 1/4 6,500 psi
H28006
3/8
5,300 psi
H28008
1/2
4,500 psi
H28010 5/8 4,000 psi
H28012
3/4
3,500 psi
H28016
1
3,000 psi
H28020
1-1/4
2,500 psi
H28024
1-1/2
2,000 psi
H28032
2
1,600 psi
Part # I.D. Working Press
H42504
1/4
5,000 psi
H42506 3/8 4,000 psi
H42508
1/2
3,500 psi
H42510
5/8
2,750 psi
H42512
3/4
2,250 psi
H42516
1
2,000 psi
H42520
1-1/4
1,625 psi
H42524
1-1/2
1,250 psi
H42532
2
1,125 psi
Part # I.D. Working Press
H43006
3/8
6,500 psi
H43008
1/2
6,000 psi
H43010
5/8
6,000 psi
H43012
3/4
5,500 psi
H43016 15,100 psi
H43020
1-1/4
4,500 psi
H43024
1-1/2
4,000 psi
H43032
2
4,000 psi
04U-104 Male Pipe Rigid
06U-508 JIC 37° Male Rigid
08U-J08 Male Pipe Swivel
04U-202 Female Pipe Rigid
04U-606 JIC Female Swivel
04U-664 JIC Female Swivel 90°
08U-S68 Female For-Seal Swivel
04Z-104 Male Pipe Rigid
06Z-506 JIC 37° Male Rigid
08Z-J08 Male Pipe Swivel
04Z-204 Female Pipe Rigid
04Z-604 JIC Female Swivel
04Z-664 JIC Female Swivel 90°
08Z-S68 Female For-Seal Swivel
43012U-112 Male Pipe Rigid
43008U-508 JIC 37° Male Rigid
43016U-J16 Male Pipe Swivel
43012U-612 JIC Female Swivel
43008U-668 JIC Female Swivel 90°
43012U-S72 Female For-Seal Swivel
Compatible Hose: H245, H280, H425
Compatible Hose: H430
Compatible Hose: H425
Portable Crimpers:
T-460, T-480 & ET1000 Series
Hand pump-powered, lightweight, completely portable crimping
presses feature from layback positioning up to a 45° angle.
Size: 15"H, 14"W, 11
1
⁄
4
"D Weight: 62 lbs
(T-460 Shown)
See Stationary Crimpers - page 8
T-460 T-460 T-460 press, hand pump
T-462 T-462 press, air/hydraulic pump
T-464 T-460, collets and spacers
T-466 T-462, collets and spacers
ET460TP-0001 Z tooling for -4 to -8
T-480-AH T-480 press, hand
lever air/hyd pump
T-480-HP T-480 press, hand pump
T-480-EP T-480 press, 110v pump
T-480-TA T-480 press, ft treadle air/hyd pump
ET480-001 T-480-HP press, pump, Z tooling
ET480TP-0001 Z tooling for -4 to -16
ET1000-001 ET1000 press only
ET1000-002 ET1000 press, hand pump
ET1000-003 ET1000 press, air/hydraulic pump
ET1000-004 ET1000 press, 110v pump
ET1000-005 ET1000 press, 12v DC pump
ET1000-016 ET1000-002, hand pump, Z tooling
ET1000-017 ET1000-003, air/hyd, Z tooling
ET1000-018 ET1000-004, 110v pump, Z tooling
ET1000TP-0001 Z tooling for -4 to -16
T-460, T-480 and ET1000 crimps U-Series,
Z-Series and 430U Series hose fittings
Part # Package Contents Part # Package Contents
WEATHERHEAD
3EATON Weatherhead Heavy Duty Parts Guide W-HYOV-MR002-E1 May 2014
For more information about Weatherhead products, Master Catalog W-HYOV-MC002-E3
H569 Truck Hose
SAE 100R5, SAE J1402 TYPE AII, DOT AII*, ABS
H338 Air Brake Hose/EC038
SAE J1402 A DOT AII
CPE Inner, Fiber Braid Cover
Reinforcement: Braids: 2 Fiber & 1 Steel
Temp: Hyd. Fluid: -48°C to +150°C (-55°F to +302°F)
Air Brake: -40°C to +93°C (-40°F to +200°F)*
Air: -40°C to +100°C (-40°F to +212°F)
Intermittent to +250°F
General purpose use in air brake*, diesel fuel,
grease lines, high temperature petroleum oils.
Hose Length Example: H56904, H56904-250R
Coll-O-Crimp
069 ‘E’ Series
Field Attachable
247 ‘N’ Series
COMMERCIAL VEHICLE
Hose Fitting Reference
H24 3 Teflon® Hose
Teflon Inner. Reinforcement: Single SS Braid, 1"
Size Double Stainless Steel Braid (Type 304)
Temp: -54°C to +232°C (-65°F to +450°F)
Hydraulic and air compressor discharge lines
where vibration and high temp are present.
Hose Length Example: H24303, H24303-150R
Teflon
®
is a registered trademark of DuPont used under license by Eaton.
Synflex® Eclipse/Solstice
Composite Type A & B Air Brake Tubing
Meets performance of SAE J844, J1131,
J2494-3 and DOT-FMVSS 106
Temp. Range: -40°C to 93°C (-40°F to 200°F)
Use for air brake systems for truck and trailer,
auxiliary air systems and formed tube harnesses.
Multiple tube colors available.
Hose Length Options: 250, 500 & 1,000
EPDM Inner and Cover. Multi-fiber Braid Reinforcement
Temp. Range: -40°C to +93°C (-40°F to +200°F)
Use for air brake hose lines.
Hose Length Example H33806, H33806-250R
Gladhand Couplings
Conform to SAE J318
Die cast aluminum body,
connect to 1/2" pipe.
338 ‘P’ Series and
‘B’ Series
Q-CAB 1800K Series and
217 Series
Air Brake Systems
Part # I.D. Working Press
H56904
3/16
3,000 psi
H56905
1/4
3,000 psi
H56906
5/16
2,250 psi
H56908 13/32 2,000 psi
H56910
1/2
1,750 psi
H56912
5/8
1,500 psi
H56916
7/8
800 psi
H56920
1-1/8
625 psi
Part # I.D. Working Press
H24303
3/16
3,000 psi
H24304
1/4
3,000 psi
H24305
5/16
2,500 psi
H24306
3/8
2,000 psi
H24308 1/2 1,750 psi
H24312
3/4
1,000 psi
H24316
1
1,000 psi
Part # O.D. Burst Pressure
4247-04
1/4"
1200 psi
3270-06 3/8" 1400 psi
3270-08
1/2"
950 psi
Part # I.D. Working Press
H33806
3/8
225 psi
H33808
1/2
225 psi
Part #
W79850 Service: Signal (Connects
only to Service)
W79851
Emergency: Supply line
(only to Emergency)
W76150
Universal (Connects to all three styles)
W14630
Gladhand Seal
Part #
12CA12-12
12CAR12-12
12CAB12-12
15CA12-12
15CAR12-12
15CAB12-12
For more information about Weatherhead products,
Master Catalog W-HYOV-MC002-E3
06908E-608 JIC 37° Female Swivel
06906E-406 SAE 45° Female Swivel
06905E-B05 Inverted Male Swivel Straight
06906E-106 Male Pipe Rigid
24705N-104 Male Pipe Rigid
24705N-505 JIC 37° Male Rigid
24710N-608 JIC Female Swivel
24710N-668 JIC Female Swivel 90°
08E-Y58 1/2 Hose I.D. 1/2 Tube
08E-Y60 1/2 Hose I.D. 5/8 Tube
12E-Y60 3/4 Hose I.D. 5/8 Tube
12E-Y62 3/4 Hose I.D. 3/4 Tube
217 Series
217-35004-03
217-38404-03
217-40004-03
217-43206-03
P Series Slider Line
33806P-Y66
33806P-Y68
33806P-Y76
P Series Swivel
33806P-Y76
33808P-Y76
33808P-Y78
B Series
Male Connector
33806B-Y24
Spring Guard
33806B-Y34
Female Connector
33806B-Y76
Hose Mender
33806B-Y06
1800K Series
1800K X 10
1800K X 12
1800K X 2.5
1800K X 3
1800K X 4
1800K X 6
1800K X 8
Compatible Fittings: Q-CAB, Compression, 1400 series DOT
Compatible Fitting: 'E' Series
Compatible Fitting: 069 'E' Series & 247 'N' Series
Compatible Hose: H569
Compatible Hose: H338
Compatible Hose: Synflex Solstice/Eclipse
Compatible Fittings: 338 'P' or 'B' Series
Coiled Air Brake Tube Assemblies
Conform to SAE J844, Type B and SAE
J1131 and DOT FMVSS 571.106
Pre-assembled brass fittings with spring guards.
Max. Operating Pressure: 150 psi
Tube O.D.: 1/2"
-54°C to +93°C (-65°F to +200°F)
‘E’ Series
Air Brake Connection
Meets/exceed all of the
industry requirements
called out in D.O.T. FMVSS
571.106-106, SAE J1131
and SAE J2494-3.
CA360 Brass Collar, Insert and Swivel Nut
Use with H243 Teflon Hose only.
1800 Series
217 Series
Part # Package Contents
4EATON Weatherhead Heavy Duty Parts Guide W-HYOV-MR002-E1 May 2014
ENGINE MAINTENANCE
FF90801 Charge Air - Hot side CAC
SAE J20 R3 and SAE J20 R1 certified
EH225 Silicone Heater Hose
Meets SAE J20 R3 Class A
H213 Hydraulic Hose
SAE J1402 TYPE AI, DOT AI
H569 Blue High Temp Hydraulic Hose
SAE 100R5, SAE J1402 TYPE AII, DOT AII*, ABS
Heavy duty truck and bus hot water
line and coolant circulation systems.
Performance exceeds EPDM lines.
4 Ply Silicone Inner, Blue Cover
Reinforcement: Polyester Braid
Temp. Range: -54°C to +177°C (-65°F to +350°F)
Lengths: 25 feet
Air brake*, diesel fuel, grease lines, high temperature
petroleum oils and medium pressure hydraulic.
CPE Inner, Fiber Braid Cover
Reinforcement: 2 Fiber Braids – 1 Steel Braid
Hyd. Fluid: -48°C to +150°C (-55°F to +302°F)
Air Brake: -40°C to +93°C (-40°F to +200°F)*
Air: -40°C to +100°C (-40°F to +212°F)
Intermittent to +250°F
EH226 Coolant Hose
Meets SAE J20 R1 Class A
Coolant lines for heavy duty truck and bus
engine. Ideal for extreme temperature
and various pressure ranges where high
performance levels are required.
4 Ply Silicone Inner, Blue Cover
Reinforcement: Woven Polyester
Temp. Range: -54°C to +177°C (-65°F to +350°F)
Lengths: 3 feet
Heavy duty truck and bus engine. Ideal
for minor misalignments and handling
vibration between tube ends.
4 Ply Silicone Rubber, Blue Cover
Reinforcement: Woven Polyester, 304
stainless steel restraining rings
Temp. Range: -54°C to +177°C (-65°F to +350°F)
FF90800 Charge Air - Cold side CAC
SAE J20 R3 and SAE J20 R1 certified
Heavy duty truck and bus engine. Ideal
for minor misalignments and handling
vibration between tube ends.
4 Ply Silicone Rubber, Red Cover
Reinforcement: Woven Aramid, 304
stainless steel restraining rings
Temp. Range: -54°C to +260°C (-65° F to +500°F)
Eaton delivers engine maintenance products that meet or exceed SAE
regulations and specific customer performance requirements. The Eaton
Silicone product family and high temperature braided hoses offer mobile
customers solutions for applications like coolant, steering and oil lines.
Part # I.D.
EH22506
0.375
EH22508
0.500
EH22510
0.625
EH22512
0.750
EH22516 1.00
Part # I.D.
FF90801-02
3.00
FF90801-03 3.50
FF90801-04
4.00
FF90801-06
4.00
Part # I.D.
FF90800-02 3.00
FF90800-03
3.50
FF90800-04
4.00
FF90800-06
4.00
Part # I.D. Part # I.D.
EH22616
1.00
EH22636
2.25
EH22620
1.25
EH22640
2.50
EH22624
1.50
EH22644
2.75
EH22628
1.75
EH22648
3.00
EH22632
2.00
Part # I.D. Working Press
H21304
3/16
2,000 psi
H21305
1/4
1,500 psi
H21306
5/16
1,500 psi
H21308
13/32
1,250 psi
H21310
1/2
1,000 psi
H21312 5/8 750 psi
H21316
7/8
400 psi
Part # I.D. Working Press
H56904
3/16
3,000 psi
H56905 1/4 3,000 psi
H56906
5/16
2,250psi
H56908
13/32
2,000 psi
H56910
1/2
1,750 psi
H56912
5/8
1,500 psi
H56916 7/ 8 800 psi
H56920
1-1/8
625 psi
* Air brake applications, sizes -04 through -12 only.
For more information about Weatherhead products, Master Catalog W-HYOV-MC002-E3
For use in air brake, fuel, diesel fuel and high temp
transmission oil cooler applications.
CPE Inner, Fiber Braid Cover
Reinforcement: 1 Fiber Braid – 1 Steel Braid.
Air Brake: -40°C to +93°C (-40°F to +200°F)
Hot Oil: -45°C to +150°C (-50°F to +302°F)
SYSTEM MAINTENANCE
Inverted Flare Hydraulic
Brakes, Power Steering,
Transmission Oil Cooler
45° Male Elbow 352x
Self Align Hydraulic and
Pneumatic Systems
601x, 611x, 681x, 661x
SAE 45° Flare Refrigeration,
Power Steering
Union 42x
Compression
Hydraulics Systems
Union 62x
Pipe Grease Lines,
Refrigeration
3151x, 3152x,
3200x, 3300x…
Truck Valves Fuel
Lines, Cooling Lines
7502, 7504…
Please see Eaton Weatherhead Crimp Specification Manual
W-HYOV-MC002-E3 for hose assembly crimp specifications.
5EATON Weatherhead Heavy Duty Parts Guide W-HYOV-MR002-E1 May 2014
Clips, Cages, Tool , Hose Cutter, Blade
E-Z Clip Tool Kit
E-Z Clip System
Exceeds SAE J2064
MOBILE AC/REFRIGERATION
• Easy to use assembly tool
• Double o-ring seal from the nipple to the hose
• No crimping required, hose assembly can be made right on the vehicle
• Lifesaver nipples available for repairing OE A/C hose and tube assemblies
Part # Part #
EJ3809-01-0606S
EJ3809-06-0810S
EJ3809-02-0806S
EJ3809-07-1010S
EJ3809-03-0608S
EJ3809-08-1012S
EJ3809-04-0808S
EJ3809-09-1212S
EJ3809-05-1008S EJ3809-10-1210S
Part # Hose I.D. Working Pressure
GH134-6WR50
5/16
500 psi
GH134-8WR50
13/32
500 psi
GH134-10WR50
1/2
500 psi
GH134-12WR50
5/8
500 psi
GH134-16WR50
7/8
500 psi
Part # Body Size
Part # Body Size
Female Brass Socket
Male Brass Plug
B2H16
1/4"
B2K16
1/4"
B4HP26 1/2" B4KP26 1/2"
B6HP31
3/4"
B6KP31
3/4"
B12H46
1 1/2"
B12K46
1 1/2"
Female Stainless Socket
Male Stainless Plug
LL2H16
1/4"
LL2K16
1/4"
LL4HP26
1/2"
LL4KP26
1/2"
LL6HP31
3/4"
LL6KP31
3/4"
LL12H41
1 1/2"
LL12K41
1 1/2"
Female Steel Socket
Male Steel Plug
2H16
1/4"
2K16
1/4"
4HP26
1/2"
4KP26
1/2"
6HP31 3/4" 6KP31 3/4"
12H41
1 1/2"
12K41
1 1/2"
E-Z Clip Compression Fittings
GH134W Hose Multi-Refrigerant Hose
Part # Kit Includes Qty Per Kit
1F40104-size
Clips
20 each size
1F40105-size
Cages
10 each size
FT1357 Assy.
Tool
1
T-135
Hose Cutter
1
T-135B Replacement Blade 1
SAE J2064 Type E, Class 1
Temp. Range: - 40°C to +135°C
(- 40°F to +275°F)
Use for transportation, refrigeration & air conditioning
Length Example GH134-6WR50, GH134-6WR200
E-Z Clip has been designed and engineered to
work exclusively with GH134W hose.
HK Series Dust Plugs and Dust Caps
Part # Example Plug: PSDC1HK, Cap: PPDC1HK
QUICK DISCONNECTS
HK Series
Meets ISO standard 7241/1 Series B
A general purpose industrial interchange coupling, features a rugged
ball latch mechanism with automatic self-sealing poppet valves in a
wide array of port configurations and multiple valved and non-valved
configurations for excellent high and low pressure sealing.
New!
FF12139
EZ Clip is the #1 field assembly hose and connector system used in North America. An engineered system designed for
heavy duty on and off highway use. Designed to work exclusively with Weatherhead GH134W hose.
QCAB
®
1800 Series and
217 Series
Air Brake Systems
Air Brake Brass
1400 Series
AB-1400 Series
Air Brake Fittings Assortment
The AB-1400 contains DOT approved
brass air brake fittings for servicing
nylon brake and secondary air lines.
Order Weatherhead NT100 nylon air
brake tubing to complete your nylon
air brake line service center.
63-drawer cabinet included. Part # AB1400
AB-140 1400 Series
Air Brake Fittings Assortment
The AB-140 contains DOT approved
brass air brake fittings for servicing
nylon brake and secondary air lines.
16-drawer cabinet included. Part # AB140
QC-18 • QCAB Assortment
Designed as a glove box sized
emergency repair kit.
Part # QC18
QC-180 • QCAB Assortment
Designed for DOT Truck and Trailer Air
Brake System needs. Part # QC180
QC-1800 • QCAB Assortment
This assortment contains a solid inventory
of popular Weatherhead Q-CAB fittings
designed for DOT Truck and Trailer Air
Brake System needs. Part # QC1800
DOT AIR BRAKE CONNECTORS
6EATON Weatherhead Heavy Duty Parts Guide W-HYOV-MR002-E1 May 2014
For more information about these and other Eaton Industrial Hose
products, Master Catalog E-HOOV-MC003-E3
INDUSTRIAL HOSE
Part #
I.D.
Working Pressure
H036332BK-
2.00
150 psi
H036348BK-
3.00
150 psi
H036364BK-
4.00
150 psi
Part #
I.D.
Working Pressure
EHP522-32-
2.00
300 psi
EHP522-48-
3.00
300 psi
EHP522-64-
4.00
300 psi
Part #
I.D.
Working Pressure
EHP500-32BK-
2.00
150 psi
EHP500-48BK-
3.00
150 psi
EHP500-64BK-
4.00
150 psi
Part #
I.D.
Working Pressure
H037232-**
2.00
200
H037240-
2.50
200
H037248-**
3.00
200
H037264-
4.00
200
Part #
I.D.
Working Pressure
H119332
2.00
300
H119348
3.00
250
H119364
4.00
200
Part #
I.D.
Working Pressure
EH92032-
2.00
350
Part #
I.D.
Working Pressure
H90120-
1.25
250
H90122-
1.38
250
H90124-
1.50
250
Part #
I.D.
Working Pressure
EHF002-32GY-
2.00
150
EHF002-48GY-
3.00
150
EHF002-64GY-
4.00
150
Part #
I.D.
Working Pressure
EHW030-32-
2.00
300
EHW030-48-
3.00
300
EHW030-64-
4.00
300
Part #
I.D.
Working Pressure
H90004-
0.25
350
H90006-
0.38
350
H90008-
0.50
350
H90012-
0.75
350
H0363 PUMA
™
Suction & Discharge
For suction and discharge of petroleum products
EHP522 Heavy Duty Petroleum/Oil Suction & Discharge
EHP500 Petroleum/Oil Suction & Discharge
High-pressure suction and discharge of petroleum products with aromatic content up to 50%
H0372 BLACKCAT
®
Hot Tar & Asphalt
For suction & discharge of tar and asphalt
H1193 ROYALFLEX™ Petroleum
For transfer of petroleum products
EH920 UL LPG (UL 21 Approved)
For transfer and delivery of propane and butane, natural gas in
open, well ventilated areas (1 psiG max. working pressure)
H901 BOSTON BULLDOG™ Fuel Oil
For fuel oil transfer for residential and/or commercial delivery
EHF002 Liquid Food Suction & Discharge
Suction and discharge of milk, vegetable oil and beverages
EHW030 OTTER™ PLUS Water S&D
S & D of water, mud and slurries; ag fertilizers, salt water (brine)
H900 UL LPG (UL 21 Approved)
For transfer and delivery of propane and butane, natural gas in
open, well ventilated areas (1 psiG max. working pressure)
COMMERCIAL VEHICLE/TANK TRUCK
FOOD AND SUCTION
WATER S & D
HOT TAR & ASPHALT
FUEL DELIVERY
LPG
Tube: Vinyl nitrile blend
Reinforcement: Fiber 2- or 4-ply
with dual helical wires and anti-
static copper wire
Cover: Vinyl nitrile blend
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: NBR blend
Reinforcement: High-tensile
synthetic textile with helical
wire and anti-static copper wire
Cover: NBR blend (RMA Class A)
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: NBR blend
Reinforcement: High-tensile
synthetic textile with a single
steel helical wire and anti-static
copper wire
Cover: NBR blend
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: Nitrile
Reinforcement: 2-ply fiberglass
with helical wire
Cover: Neoprene
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: Nitrile blend
Reinforcement: 100% polyester
and helical wire
Cover: Nitrile blend
Type of Couplings:
• Male NPT
• Cam locks
Tube: Nitrile
Reinforcement: Textile braids
and stainless steel anti-static
wire
Cover: Pin-pricked neoprene
Type of Couplings:
• Swaged or crimp male
couplings
Tube: Nitrile rubber
(RMA Class A)
Reinforcement: Double fiber
braid
Cover: Vinyl nitrile rubber
Type of Couplings:
• Reattachable
• Internally expanded permanent
attached
Tube: Vegetable oil-resistant
NBR, FDA approved material
Reinforcement: High-tensile
synthetic textile with a single
steel helical wire
Cover: Oil, abrasion, ozone, and
weather resistant synthetic
rubber
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: EPDM
Reinforcement: High-tensile
synthetic textile with dual
helical wires
Cover: EPDM
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: Nitrile
Reinforcement: Textile braid
Cover: Pin-pricked vinyl nitrile
Type of Couplings:
• “U” Series
• Swaged or crimp male
couplings
Hose is capable of this rating.
LP-Gas should never be elevated
above 100°F
Temp:-40°F to +180°F
Pressure: 150 psi
Temp: -31°F to +158°F
Pressure: 300 psi
Temp: -31°F to +158°F
Pressure: 150 psi
Temp: +177°C Intermittent, (+350°F), Handles intermittent,
temperature of hot tar and asphalt up to +400°F
Temp: -20°F to +180°F
Pressure: 200-300 psi Temp: -40°F to +140°F
Pressure: 350 psi
Temp: -40°F to +248°F
Pressure: 250-300 psi
Temp: -40°F to +180°F
Pressure: 250 psi
Temp: -40°C to +80°C, (-40°F to +176°F)
Pressure: 150 psi
High-pressure suction and discharge of petroleum products with aromatic content up to 50%
Temp: -40°F to +140°F
Pressure: 350 psi
7EATON Weatherhead Heavy Duty Parts Guide W-HYOV-MR002-E1 May 2014
For more information about these and other Eaton Industrial Hose
products, Master Catalog E-HOOV-MC003-E3
Part #
I.D.
Working Pressure
H055432
2.00
500 psi
H055448
3.00
500 psi
H055464
4.00
500 psi
Part #
I.D.
Working Pressure
H034948-100
3.00
150 psi
H034964-100
4.00
100 psi
Part #
I.D.
Working Pressure
H036432-
2.00
150 psi
H036448-
3.00
150 psi
H036464-
4.00
150 psi
Part #
I.D.
Working Pressure
H835932
2.00
250 psi
H835948
3.00
175 psi
H835964
4.00
175 psi
Part #
I.D.
Working Pressure
EH36032-
2.00
150 psi
EH36048-
3.00
150 psi
EH36064-
4.00
150 psi
Part #
I.D.
Working Pressure
H034748-100
4.00
100 psi
H034764-100
5.00
100 psi
Part #
I.D.
Working Pressure
H119632
2.00
300 psi
H119648
3.00
250 psi
H119664
4.00
200 psi
Part #
I.D.
Working Pressure
H052164-100
4.00
75 psi
H052180-100
5.00
75 psi
Part #
I.D.
Working Pressure
H052332XX-100
2.00
300 psi
H052348XX-100
3.00
250 psi
H052364XX-100
4.00
175 psi
Part #
I.D.
Working Pressure
H031964-100
4.00
75 psi
H031980-100
5.00
75 psi
H0554 ARMORCAT™ Petrochemical
Transfer of acids, chemicals, solvents, and petroleum products; Loading
and unloading, pumping, suction, or gravity flow discharge
H0349 WILDCAT™ Hot Air Transfer
Hot air blower hose; hot, dry, non-oily applications
H0364 OTTER™ Water Suction & Discharge
S & D of water, mud and slurries; ag fertilizers, salt water (brine)
H8359 PANTHER™ Chemical
For transfer of acids, chemicals, solvents, and petroleum products
EH360 Water Suction & Discharge
S & D, pumping of water, mud and slurries; transfer salt water (brine)
H0347 WILDCAT™ Dry Material
Transfer of dry bulk, of bottle caps and of cleaning agents. Discharge of abrasive materials
H1196 ROYALFLEX
Transfer of water, liquid, diluted fertilizers and pesticides;
pumping, S & D of water and slurries
H0521 WILDCAT™ Heavy Duty Dry Material
Transfer of dry bulk, of bottle caps and of cleaning agents. Discharge of abrasive materials
H0523 CHEMCAT™ Petrochemical
Transfer of acids, chemicals, solvents, and petroleum products, and food transfer
H0319 WILDCAT™ Soft Wall Dry Material formerly LYNX
Transfer of dry bulk, of bottle caps and of cleaning agents. Discharge of abrasive materials
CHEMICAL
DRY MATERIAL
HOT AIR BLOWER
Tube: UHMW-PE
FDA-approved material
Reinforcement: 2-wire braid,
dual stainless steel anti-static,
3.00” and 4.00” helical wire
Cover: EPDM
Type of Couplings:
• Cam and groove
• Combination nipple
• Male NPT
Tube: EPDM
Reinforcement: Textile with
dual helical wires
Cover: Pin-pricked EPDM
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: EPDM
Reinforcement: High-tensile
synthetic textile / steel helical
wire
Cover: EPDM
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: XLPE
Reinforcement: 2-ply fiber with
helical wire
Cover: EPDM
Type of Couplings:
• Cam and groove
• Combination nipple
• Male NPT
Tube: Synthetic rubber
Reinforcement: Textile and a
single steel helical wire with a
dual steel helical wire on 8.00”,
10.00” and 12.00”
Cover: Abrasion and weather
resistant synthetic rubber
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: Static dissipating natural
rubber/SBR
Reinforcement: 2-ply fiber with
dual helical wires
Cover: SBR
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: Thermoplastic vinyl nitrile
Reinforcement: 100% polyester
and helical wire
Cover: Thermoplastic vinyl nitrile
Type of Couplings:
• Male NPT
• Cam and groove
Tube: 1/4” tube thickness
natural rubber blend
Reinforcement: 2-ply textile with
copper anti-static wire
Cover: SBR
Type of Couplings:
• Cam and groove
• Combination nipple
Tube: UHMW-PE
FDA-approved material
Reinforcement: 2-ply fiber and
dual helical wires
Cover: EPDM
Type of Couplings:
• Cam and groove
• Combination nipple
• Male NPT
Tube: 3/16” tube thickness
natural rubber blend
Reinforcement: 2-ply textile
and conductive copper
anti-static wire
Cover: NR blend
Type of Couplings:
• Cam and groove
• Combination nipple
Temp: -40°F to +250°F, Intermittent
Pressure: 500 psi
Temp: -40°F to +248°F
Pressure: 150 psi
Temp: -45°F to +150°F
Pressure: 175-250 psi
Temp: -13°F to +158°F
Pressure: 150 psi Temp: -10°F to +160°F
Pressure: 100 psi
Temp: -20°F to +180°F
Pressure: 200-300 psi
Temp: (-40°F to +158°F)
Pressure: 75 psi
Temp: -40°F to +250°F, WARNING: Intermittent
Pressure: 175-300 psi
Temp: -40°C to +70°C
Pressure: 75 psi
Temp: -30°F to +350°F, Intermittent +350°F
Pressure: 100-150 psi
BRASS CONNECTORS
SAE 45° Flare
90° Male Elbow
49x
Metric Adapter
1442
Metric Adapter
1443
Fuel Line Adapter
1514
Pipe
Adapter 3200x
Threaded Sleeve
Nut 6100x
Threaded Sleeve
Male Connector
6200x
DOT Air Brake
Union
1862x
DOT Air Brake
45° Male Elbow
1880x
DOT Air Brake
90° Union Elbow
1869x
Brake Line Unions
7934A, 7940, 7941
DOT Air Brake
Male Connector
1868x
L
C
Pipe
Cap
3129x
Pipe
Bushing
3220x
Pipe
Coupling
3300x
Pipe
Hex Nipple
3325x
Pipe
Close Nipple
3326x
Pipe
Long Nipple
3327x, 3328x
Pipe
45° Street Elbow
3350x
Pipe
90° Street Elbow
3400x
Pipe
90° Elbow
3500x
Pipe
Male Branch Tee
3600x
Pipe
Tee
3700x
Pipe
Male Run Tee
3750x
SAE 45° Flare
Male Connector
48x
Tube Nut
100x Brass
Pipe
Slotted Plug
3150x
Compression
Sleeve
60x
Tube Nut
105x Steel
Inverted Flare
Plug
131x Steel
Inverted Flare
Male Connector
202x
Inverted Flare
Female Connector
252x
Inverted Flare
Union
302x
SAE 45° Flare
Long Nut
41x
SAE 45° Flare
Union
42x
Pipe
Square Head Plug
3151x
Pipe
Hex Head Plug
3152x
Inverted Flare
90° Male Elbow
402x
Compression
Nut
61x
Compression
Union 62x
Compression
Union Tee
64x
Compression
Female Connector
66x
Compression
Male Connector
68x
Female Pipe Double
Shut-off
6809
Male to Female
Pipe Shut-off
6829
Compression
90° Male Elbow
69x
ET4001 Coll-O-Crimp (Crimps thru 2”)
Capable of crimping all of the standard
crimp style Weatherhead fittings
Size: 29"H, 12"W, 21"D Weight: 550 lbs.
T-420 Coll-O-Crimp Super I
(Crimps thru 1-1/4” 6-wire)
Big capacity combined with lever activated crimping, quick
and simple way to make factory quality hose assemblies.
Size: 22"H, 10"W, 20
1
⁄
2
"D Weight: 210 lbs.
Stationary Crimpers:
Portable Crimpers on page 2
TOOLING
ET4001-002 ET4001 press only (no pump or valve)
ET4001-004 ET4001 press, ET4001P-001 220v 1 phase pump
ET4001-006 ET4001-004 plus 430U collets
ET4001-010 ET4001-004 plus 4SP/6SP collets
ET440TP-0001 Z tooling for -4 to -16
FF91047 Coll-O-Cart
ET4001 crimps Z-Series, 430U and 4SP/6SP hose fittings
T-420-1 T-420-1 press only
T-420-N T-420-1, T-421U 220v pump, U & 430U tooling
T-420N-110 T-420-1, T-421U-110 110v pump, U & 430U tooling
ET420-002 T-420-1, T-421U 220v pump, Z tooling
ET420-003 T-420-1, T-421U-110 110v pump, Z tooling
ET420-004 T-420-1, T-421U 220v pump, Z & 430U tooling
ET420-005 T-420-1, T-421U-110 110v pump, Z & 430U tooling
ET420TP-0001 Z tooling for -4 to -16
T-420 crimps U-Series, Z-Series and 430U Series hose fittings
** Collets and spacers to crimp fitting size ranges noted are included in packages
except -10 size collets/dies typically not included. Check catalog for details.
Part # Package Contents
Part # Package Contents
Part # Package Contents
T-400 T-400-1 press, tooling, (no pump)
T-400-1 T-400-1 press only
T-401 T-400, 220v 1 phase pump, U tooling
T-401-110 T-400, 110v 1 phase pump, U tooling
T-402 T-400, air/hydraulic pump, U tooling
T-403 T-400, hand pump, U tooling
T-400 crimps U-Series and Z-Series hose fittings
T-400 Coll-O-Crimp 1 (Crimps thru 1-1/4” 2-wire)
Fast, easy, compact and various power sources available,
versatile for even the smallest of workshops.
Size: 16
1
⁄
4
"H, 8"W, 21
3
⁄
4
"D Weight: 113 lbs.
Equipment + Tooling packages available
Hose Cutting Machines
This cutting machine uses a toothed knife, cutting with the
backs of each tooth. The saw bends the hose into the blade
spreading the cut edges to avoid burning and smoking.
ET9100-07-110 7 inch
ET9200-10-220 10 inch
ET9300-14-220 14 inch
© 2014 Eaton
All Rights Reserved
Printed in USA
Document No. W-HYOV-MR002-E1
May 2014
Eaton
Hydraulics Group USA
14615 Lone Oak Road
Eden Prairie, MN 55344
USA
Tel: 952-937-9800
Fax: 952-294-7722
www.eaton.com/hydraulics
Eaton
Hydraulics Group Europe
Route de la Longeraie 7
1110 Morges
Switzerland
Tel: +41 (0) 21 811 4600
Fax: +41 (0) 21 811 4601
Eaton
Hydraulics Group Asia Pacific
Eaton Building
No.7 Lane 280 Linhong Road
Changning District, Shanghai
200335
China
Tel: (+86 21) 5200 0099
Fax: (+86 21) 2230 7240
