Qedit
User Manual: qedit
Open the PDF directly: View PDF 
.
Page Count: 383
| Download | |
| Open PDF In Browser | View PDF |
Qedit 5.9 for HP e3000
User Manual
by Robelle Solutions Technology Inc.
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • i
Program and manual copyright © 1977-2014 Robelle Solutions
Technology Inc.
Permission is granted to reprint this document (but not for profit),
provided that copyright notice is given.
Updated Monday, January 27, 2014
Qedit and Suprtool are trademarks of Robelle Solutions Technology
Inc. Windows is a trademark of Microsoft Corporation. Other product
and company names mentioned herein may be the trademarks of their
respective owners.
Robelle Solutions Technology Inc.
7360 – 137 Street, Suite 372
Surrey, B.C. Canada V3W 1A3
Phone: 604.501.2001
Fax:
604.501.2003
E-mail: sales@robelle.com
E-mail: support@robelle.com
Web:
ii • Welcome to Qedit
www.robelle.com
Qedit 5.9 for HP e3000 User Manual
Contents
Welcome to Qedit
1
Introduction................................................................................................................................. 1
Documentation ............................................................................................................................ 2
Change Notice .............................................................................................................. 2
Printed Documentation ................................................................................................. 2
Documentation Download ............................................................................................ 2
Other Documentation.................................................................................................................. 2
Printdoc Program .......................................................................................................... 2
Other Manuals of Interest ............................................................................................. 2
Customer Support ....................................................................................................................... 3
Robelle Newsletter...................................................................................................................... 3
QLIB and Bonus Contributed Software ..................................................................................... 3
Notation ...................................................................................................................................... 4
New to Qedit ............................................................................................................................... 5
Installing Qedit
7
General Installation Notes .......................................................................................................... 7
Who Should Use These Instructions? .......................................................................... 7
Summary of Installation Steps ..................................................................................... 7
Qedit Compiler Interfaces ............................................................................................ 7
Important Note About Passwords ................................................................................ 8
STREAMX Users ......................................................................................................... 8
Step 1: Install Qedit .................................................................................................................... 8
Step 2: Install QLIB and Bonus Programs ................................................................................. 9
Building the Spell Dictionary ..................................................................................... 10
Step 3: Install NM Compiler Interface ..................................................................................... 10
Installing the Interface ................................................................................................ 10
Compiling Instructions ............................................................................................... 11
Step 4: Install CM Compiler Interface...................................................................................... 11
Choosing a CM Installation Method .......................................................................... 11
Integrating CM Compiler Changes ............................................................................ 11
Isolating CM Compiler Changes ................................................................................ 12
Step 5: Saving Disc Space ........................................................................................................ 12
Purging Obsolete Files ............................................................................................... 12
Minimal Set of Files ................................................................................................... 12
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • iii
Moving Qedit to Another Account ........................................................................................... 13
Moving All the Files ................................................................................................... 13
Redirecting the File Names ........................................................................................ 14
Moving a "Hooked" Qedit .......................................................................................... 14
Running the MPEXHOOKed Qedit ........................................................................... 14
Removing the Compiler Interface ............................................................................................. 15
Removing the NM Interface ....................................................................................... 15
Removing the Integral CM Interface .......................................................................... 15
Removing the Isolated CM Interface ......................................................................... 16
Getting a Quick Start with HP Full-Screen Editing
17
Introduction ............................................................................................................................... 17
Starting Visual Mode ................................................................................................................ 18
Screen Layout ........................................................................................................................... 19
Home Line .................................................................................................................. 19
Status Line .................................................................................................................. 19
Text Lines ................................................................................................................... 19
Template Line ............................................................................................................. 19
Special Indicator Columns ......................................................................................... 20
Using Your Keyboard ............................................................................................................... 20
Moving the Cursor ...................................................................................................... 20
Editing the Text Lines ................................................................................................ 20
Control Functions ....................................................................................................... 21
Reflection for DOS Keyboards .................................................................................. 21
Other PC Keyboards ................................................................................................... 22
Function Keys ........................................................................................................................... 22
Browsing Through Your File .................................................................................................... 23
Cut-and-Paste ............................................................................................................................ 24
Cutting Operations...................................................................................................... 24
Pasting Operations ...................................................................................................... 25
Resetting Cut-and-Paste ............................................................................................. 25
Copying a Block of Text ............................................................................................ 25
Cut-and-Paste Between Files ...................................................................................... 26
Dividing and Gluing Operations ................................................................................ 26
Dividing Lines in Visual Mode .................................................................................. 26
Gluing Lines in Visual Mode ..................................................................................... 27
Excluding Lines From Visual Mode Display ............................................................. 27
Justifying Lines in Visual Mode................................................................................. 28
Renumbering Lines .................................................................................................... 28
Inserting Blank Lines ................................................................................................. 28
Hold Files ................................................................................................................... 28
Marking Changes Without Using Line Numbers ....................................................... 28
Paste from a Non-Qedit File ....................................................................................... 29
Home Line Commands ............................................................................................................. 29
Finding Strings ........................................................................................................... 29
Changing Strings ........................................................................................................ 30
Help on Visual Mode.................................................................................................. 30
Compile, Link, and Run ............................................................................................. 30
Formatting Paragraphs................................................................................................ 31
Undoing Changes in Visual Mode ............................................................................. 31
Refreshing the Screen ................................................................................................. 31
Other Line Mode Commands ..................................................................................... 31
Truncated Home Line ................................................................................................. 32
Exit from Visual ......................................................................................................... 32
iv • Welcome to Qedit
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with Line Mode Editing
33
Introduction............................................................................................................................... 33
Adding Lines to a File .............................................................................................................. 33
Looking at the File .................................................................................................................... 34
Browsing the File ...................................................................................................................... 35
Searching the File ..................................................................................................................... 35
Editing Lines ............................................................................................................................. 36
Global Changes ......................................................................................................................... 37
Copying Lines ........................................................................................................................... 38
Moving Lines ............................................................................................................................ 38
Deleting Lines ........................................................................................................................... 39
Help Command ......................................................................................................................... 39
Saving the File .......................................................................................................................... 40
Open and Shut for Instant Access ............................................................................................. 40
Running Qedit under MPE
41
Introduction............................................................................................................................... 41
Edit in Line Mode or in Full-Screen Mode .............................................................................. 41
Edit Several Files at Once......................................................................................................... 42
Qeditmgr Configuration Files ................................................................................................... 42
Limiting Compile Priority .......................................................................................... 43
Default Set Commands............................................................................................... 43
Using Qedit in Batch ................................................................................................................ 43
Summary of Parm= Values ....................................................................................................... 44
From the Posix Shell .................................................................................................. 44
Exit and Entry Options ............................................................................................................. 44
Exit with Verify .......................................................................................................... 45
Info= First File to Edit ................................................................................................ 45
Random Name for Primary Scratch File .................................................................... 45
"Discard Changes?" on Exit ....................................................................................... 45
Info= "-p 99" Specifies Parm Value ........................................................................... 45
Info= "-c cmdstring" ................................................................................................... 46
Parm 512 to Edit a Single File ................................................................................... 46
Info= An Empty File to Fill........................................................................................ 47
Info= Temporary File ................................................................................................. 47
Info= Can Create New Files ....................................................................................... 47
Parm Values to Suspend or Not ................................................................................. 47
Info= Commands Only ............................................................................................... 48
Basicentry Option ....................................................................................................... 48
JCWs That Drive Qedit ............................................................................................................ 49
RCRTMODEL JCW .................................................................................................. 49
RPCVERSION JCW .................................................................................................. 50
RCRTWIDTH JCW ................................................................................................... 51
RCRTSTRAPSGH for Handshaking ......................................................................... 51
RLABELDEFAULT JCW ......................................................................................... 53
QEDITMGRTRACE JCW ......................................................................................... 53
QEDPARMBITS JCW ............................................................................................... 53
QEDCURWFILE Variable ........................................................................................ 54
QEDSTOREDPWD and QEDPROMPTEDPWD Variables ..................................... 54
Qedit for Microsoft Windows
55
Introduction............................................................................................................................... 55
Server Process ........................................................................................................................... 55
Logon Sequence ......................................................................................................... 55
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • v
QEDSERVMODE JCW ............................................................................................. 56
Log Files ................................................................................................................................... 56
Qedit Issues and Solutions
59
Running Qedit with Reflection ................................................................................................. 59
RPCVERSION JCW .................................................................................................. 59
Using a Command File to Start Up ............................................................................ 59
Alt-Y vs. :Reflect........................................................................................................ 60
Qedit and Reflection File Transfers ........................................................................... 60
Form Feed Causing Return/Line Feed ....................................................................... 61
Typeahead and Visual Mode ...................................................................................... 61
Completion Codes ...................................................................................................... 61
Controlling the PC ...................................................................................................... 62
Accidental Exit from Reflection ................................................................................. 62
Changing the Exit Keystroke...................................................................................... 62
Running Qedit in MPE/iX ........................................................................................................ 63
Unresolved Externals on MPE/iX 4.0 ........................................................................ 63
Compiling on MPE/iX ................................................................................................ 63
XDB: the Symbolic Debugger.................................................................................... 63
Command Files and Variables.................................................................................... 64
Visual Mode ............................................................................................................... 64
EOF vs. LIMIT ........................................................................................................... 64
Disc Space for Files and Xltrim ................................................................................. 64
Extents ........................................................................................................................ 64
Qedit as the HPDesk Editor ...................................................................................................... 65
Configuring HPDesk .................................................................................................. 65
Configuring Qedit in HPDesk .................................................................................... 65
DeskQed ..................................................................................................................... 65
Getting Programs to Read Qedit Files ...................................................................................... 66
Qinput ......................................................................................................................... 67
Qcompxl ..................................................................................................................... 67
Qeditaccess Subroutine .............................................................................................. 67
Qedify ......................................................................................................................... 67
Qedify and $Include ................................................................................................... 68
Editing Wide Files .................................................................................................................... 69
Using the New Command .......................................................................................... 69
Using the Text Command ........................................................................................... 69
Lines, Strings and Ranges ......................................................................................................... 70
Using Qedit with MPE Programming Languages
73
Introduction ............................................................................................................................... 73
Editerr: Trapping Compiler Errors............................................................................................ 73
Limitations and Restrictions ....................................................................................... 74
Linking PowerHouse with Qedit .............................................................................................. 75
Invoking PowerHouse from Qedit.............................................................................. 75
Configuring Qedit as Your Editor .............................................................................. 76
Editing PowerHouse Subfiles ..................................................................................... 77
COBOL ..................................................................................................................................... 77
Selecting a Compiler .................................................................................................. 77
Sequence Numbers and Comments ............................................................................ 77
Tagging Source Changes ............................................................................................ 78
Copylib Members ....................................................................................................... 78
Trapping Syntax Errors .............................................................................................. 78
FORTRAN ................................................................................................................................ 78
vi • Welcome to Qedit
Qedit 5.9 for HP e3000 User Manual
Pascal ........................................................................................................................................ 79
C Language ............................................................................................................................... 79
SPL ........................................................................................................................................... 80
TRANSACT ............................................................................................................................. 80
RPG........................................................................................................................................... 80
BASIC....................................................................................................................................... 81
Segmenter ................................................................................................................................. 81
Common Uses of Qedit
83
Introduction............................................................................................................................... 83
Qedit as Word Processor .......................................................................................................... 83
QNote UDC for Occasional Memos .......................................................................... 83
Justify Capability........................................................................................................ 83
Check Spelling ........................................................................................................... 84
Prose: A Text Processor ............................................................................................. 85
Using TDP from within Qedit .................................................................................... 86
Qedit as a File Utility ................................................................................................................ 86
Sorting a Range of Lines ............................................................................................ 86
Searching Groups of Files for Strings ........................................................................ 86
Editing Data Files ....................................................................................................... 87
Editing Program Files................................................................................................. 89
Qedit as an Operations Tool ..................................................................................................... 89
Editing Stream Files ................................................................................................... 89
Native-Mode Output Spool Files ............................................................................... 90
Editing Bells, Tabs and Escapes ................................................................................ 90
Aborting All Users to Back Up .................................................................................. 90
Qedit Commands
93
Introduction............................................................................................................................... 93
General Notes ........................................................................................................................... 93
Abbreviations ............................................................................................................. 93
Uppercase or Lowercase ............................................................................................ 93
Multiple Commands per Line .................................................................................... 94
Comments on Command Lines .................................................................................. 94
STREAMX Warning .................................................................................................. 94
Stopping Commands with Control-Y ......................................................................... 95
Implicit Commands .................................................................................................... 95
Function Keys ............................................................................................................ 95
Command Files and UDCs ......................................................................................... 96
MPE Commands ........................................................................................................ 96
Differences from MPE ............................................................................................... 96
Calculator Commands ................................................................................................ 97
QEDITCOUNT JCW ................................................................................................. 97
QEDCURWFILE Variable ........................................................................................ 97
External Program Commands .................................................................................... 97
:Activate Command [AC/:A] .................................................................................................... 98
Add Command [A] ................................................................................................................... 99
Add (Adding New Lines) ........................................................................................... 99
Add (Adding a String as a Line) .............................................................................. 101
Add (Copying Lines within a File) .......................................................................... 101
Add (Moving Lines within a File)............................................................................ 102
Add (Copying Lines Between Files) ........................................................................ 103
Append Command [AP] ......................................................................................................... 105
Backward Command [BA/F5] ................................................................................................ 106
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • vii
Before Command [B] .............................................................................................................. 107
:Beginfile and :Endfile Commands ......................................................................................... 109
Change Command [C] ............................................................................................................ 110
Change (Changing Strings) ...................................................................................... 110
Change (Changing Columns) ................................................................................... 113
Close Command [CL] ............................................................................................................. 114
Colcopy Command [COL] ..................................................................................................... 115
Colmove Command [COLM] ................................................................................................ 118
:Compile Command [CO/:C] .................................................................................................. 121
Delete Command [D] .............................................................................................................. 124
Destroy Command [DES/:D] .................................................................................................. 126
:Display Command [DISPLAY] ............................................................................................. 127
Divide Command [DI] ............................................................................................................ 128
:Do Command [DO] ............................................................................................................... 129
:Editerror Command [EDITERROR] ..................................................................................... 130
:Escape Command [ESCAPE] ................................................................................................ 132
Exit Command [E/F8] ............................................................................................................. 133
Find Command [F/F4] ............................................................................................................ 134
Findup Command [FINDU/F3] .............................................................................................. 136
Form Command [FORM] ....................................................................................................... 137
Forward Command [FO/F6] ................................................................................................... 138
Garbage Command [GAR] ..................................................................................................... 139
Glue Command [G]................................................................................................................. 140
Help Command [H/?] .............................................................................................................. 141
Hold Command [HO] ............................................................................................................. 142
:If, :Endif, :Else, :Elseif Commands ....................................................................................... 143
Justify Command [J] ............................................................................................................... 144
Keep Command [K] ................................................................................................................ 150
:Kill Command [KI/:K]........................................................................................................... 154
List Command [L]................................................................................................................... 155
:Listredo Command [LISTREDO/F7] .................................................................................... 167
:Listundo Command [LISTU]................................................................................................. 168
Lsort Command [LS] .............................................................................................................. 169
Merge Command [ME] ........................................................................................................... 170
Modify Command [M] ............................................................................................................ 172
New Command [N] ................................................................................................................. 181
Open Command [O] ................................................................................................................ 182
:Pause Command [PAUSE] .................................................................................................... 186
:Prep Command [PREP/:P] ..................................................................................................... 187
Proc Command [P] .................................................................................................................. 189
Q Command [Q] ..................................................................................................................... 191
/Qedit Command ..................................................................................................................... 192
:Qhelp Command [QHELP] ................................................................................................... 193
:Redo Command [REDO] ....................................................................................................... 194
:Reflect Command [REFLECT] ............................................................................................. 196
Renumber Command [REN]................................................................................................... 198
Replace Command [R] ............................................................................................................ 199
:Return Command [RETURN] ............................................................................................... 201
:Run Command [RU/:R] ......................................................................................................... 202
Run, Implied ........................................................................................................................... 205
:Segmenter Command [SEG/:S] ............................................................................................. 206
Set Command [S] .................................................................................................................... 207
Account..................................................................................................................... 209
Alias .......................................................................................................................... 209
Autocont ................................................................................................................... 211
Check ........................................................................................................................ 211
viii • Welcome to Qedit
Qedit 5.9 for HP e3000 User Manual
Decimal .................................................................................................................... 212
DL size ..................................................................................................................... 212
Editinput ................................................................................................................... 212
Expandtabs ............................................................................................................... 213
Extentsize ................................................................................................................. 213
Extprog ..................................................................................................................... 214
Filename ................................................................................................................... 214
FORTRAN ............................................................................................................... 215
HFS........................................................................................................................... 215
Halfbright ................................................................................................................. 216
Hints ......................................................................................................................... 216
Hppath ...................................................................................................................... 216
Increment .................................................................................................................. 216
Interactive ................................................................................................................. 217
Justify ....................................................................................................................... 217
Keep ......................................................................................................................... 217
Language .................................................................................................................. 222
Left ........................................................................................................................... 224
Length....................................................................................................................... 224
Lib ............................................................................................................................ 224
Limits ....................................................................................................................... 224
List ............................................................................................................................ 225
Maxdata .................................................................................................................... 225
Modify ...................................................................................................................... 226
Open ......................................................................................................................... 227
Pattern....................................................................................................................... 228
Priority ...................................................................................................................... 228
Prompt ...................................................................................................................... 229
Redo ......................................................................................................................... 229
Right ......................................................................................................................... 230
RL file name ............................................................................................................. 230
Shift .......................................................................................................................... 231
Spell .......................................................................................................................... 231
Statistics ................................................................................................................... 232
Stringdelimiters ........................................................................................................ 232
Suspend .................................................................................................................... 233
Tabs .......................................................................................................................... 233
Term ......................................................................................................................... 234
Text........................................................................................................................... 235
Totals ........................................................................................................................ 236
UDC ......................................................................................................................... 236
Undo ......................................................................................................................... 237
Varsub ...................................................................................................................... 237
Visual ....................................................................................................................... 238
Warnings .................................................................................................................. 248
Whichcomp .............................................................................................................. 248
Window .................................................................................................................... 249
Work ......................................................................................................................... 250
Wraparound .............................................................................................................. 251
X ............................................................................................................................... 252
YNone ...................................................................................................................... 255
Zip ............................................................................................................................ 255
Shut Command [SH]............................................................................................................... 257
Spell Command [SP] .............................................................................................................. 258
:Stream Command [STREAM] .............................................................................................. 260
:Tdpfinal and :Tdpdraft Commands ....................................................................................... 261
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • ix
Text Command [T] ................................................................................................................. 262
Undo Command [UN]............................................................................................................. 269
Up Command [UP/F2] ............................................................................................................ 271
Use Command [U] .................................................................................................................. 272
Verify Command [V] .............................................................................................................. 273
Visual Command [VI/F1] ....................................................................................................... 274
:While and :Endwhile Commands .......................................................................................... 275
Words Command [W] ............................................................................................................. 276
:Xltrim Command [XLTRIM] ................................................................................................ 277
Zave Command [Z] ................................................................................................................. 278
ZZ Command .......................................................................................................................... 279
User Defined Commands ........................................................................................................ 280
Command Files ....................................................................................................................... 285
Calculator Command [=] ........................................................................................................ 288
POSIX Commands [!] ............................................................................................................. 291
Troubleshooting and Error Messages
293
Introduction ............................................................................................................................. 293
Messages ................................................................................................................................. 293
System Errors .......................................................................................................................... 295
Quit Errors .............................................................................................................................. 295
Errors in Visual ....................................................................................................................... 296
Using Visual with X.25 ............................................................................................ 296
Using Visual on MPE/iX .......................................................................................... 296
Accidental Invocation of MPE/iX CI ....................................................................... 296
Using Visual on HP-UX ........................................................................................... 297
Terminals Supported by Visual ................................................................................ 297
Problems with 700/9x Terminals.............................................................................. 297
Visual Error Messages .............................................................................................. 297
Analyzing Compiler Problems ................................................................................................ 299
QCOMPXLTRACE JCW ........................................................................................ 299
Control-Y and NM Compiles ................................................................................... 300
How to Bypass Qcompxl .......................................................................................... 300
Problems with HP's C Compiler ............................................................................... 300
Unresolved External Reference ................................................................................ 300
Illegal Characters ...................................................................................................... 300
Pascal/V Compiler Stack Overflow.......................................................................... 300
File Formats
303
Introduction ............................................................................................................................. 303
Qedit Workfiles ....................................................................................................................... 303
Original Format Workfiles ...................................................................................................... 303
Jumbo Workfiles ..................................................................................................................... 304
External Files .......................................................................................................................... 305
Error Files for Editerror .......................................................................................................... 307
Prefix Characters & Data.......................................................................................... 307
User Routines
309
Introduction ............................................................................................................................. 309
Wide Lines and User Procedures ............................................................................................ 309
"Init" Interface Procedure ....................................................................................................... 310
"Com" Interface Procedure ..................................................................................................... 311
"Add" Interface Procedure ...................................................................................................... 312
"Exit" Interface Procedure ...................................................................................................... 312
x • Welcome to Qedit
Qedit 5.9 for HP e3000 User Manual
Installing Your Interface Procedures ...................................................................................... 313
Alternate Activation................................................................................................................ 313
The Modify User Hook ........................................................................................................... 314
Writing a User Procedure ....................................................................................................... 314
DL Space ................................................................................................................................ 315
Passing Procspace Values ....................................................................................................... 315
Communication Flags for User Code ..................................................................................... 315
Qcopy
317
Introduction............................................................................................................................. 317
Accessing Qcopy .................................................................................................................... 317
Qcopy Documentation ............................................................................................................ 317
Qedit-Compatible Software Tools
319
Introduction............................................................................................................................. 319
Compare/iX............................................................................................................................. 319
OMNIDEX ............................................................................................................................. 319
Adager..................................................................................................................................... 320
CCS - Corporate Computer Systems ...................................................................................... 320
Reflection ................................................................................................................................ 320
ROBOT ................................................................................................................................... 320
PowerHouse ............................................................................................................................ 320
Splash for Native-Mode SPL .................................................................................................. 321
Prose Text Formatter .............................................................................................................. 321
Spell: Spelling Checker .......................................................................................................... 321
Qhelp Help System ................................................................................................................. 321
TRANSACT ........................................................................................................................... 321
MPEX and STREAMX .......................................................................................................... 321
SCOMPARE and ANALYZER ............................................................................................. 322
Xpedit Full-Screen Editor ....................................................................................................... 322
Nuggets ................................................................................................................................... 322
Fantasia ................................................................................................................................... 323
TDP ......................................................................................................................................... 323
Network Engine ...................................................................................................................... 323
Regular Expressions
325
Introduction............................................................................................................................. 325
Metacharacters ........................................................................................................................ 325
Character Class ....................................................................................................................... 327
Escape Character .................................................................................................................... 329
Escaped Sequences in Regular Expressions ........................................................................... 329
Backreferences in Regular Expressions.................................................................................. 330
Escaped Characters in Replacement String ............................................................................ 331
Qedit Glossary
331
Introduction............................................................................................................................. 331
Terms ...................................................................................................................................... 332
Abbreviating ............................................................................................................. 332
Batch......................................................................................................................... 332
Calculator ................................................................................................................. 332
Column ..................................................................................................................... 332
Command ................................................................................................................. 333
Control Character ..................................................................................................... 333
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • xi
Copylib Members ..................................................................................................... 334
CRT .......................................................................................................................... 334
Current Line.............................................................................................................. 334
Defaults..................................................................................................................... 334
External File ............................................................................................................. 335
File Names ................................................................................................................ 335
Full-Screen Editing ................................................................................................... 336
Hold File ................................................................................................................... 336
J Option .................................................................................................................... 336
Jumbo Files ............................................................................................................... 337
Keep File .................................................................................................................. 337
Language .................................................................................................................. 337
Left ........................................................................................................................... 337
Length ....................................................................................................................... 337
Line ........................................................................................................................... 338
Linenum .................................................................................................................... 338
Looping..................................................................................................................... 339
Margins ..................................................................................................................... 339
Member..................................................................................................................... 339
Memory Lock ........................................................................................................... 339
MPE Command ........................................................................................................ 339
Patterns ..................................................................................................................... 340
Procedure .................................................................................................................. 340
Qeditscr..................................................................................................................... 341
Quiet-Q Option ......................................................................................................... 341
Range ........................................................................................................................ 341
Rangelist ................................................................................................................... 342
Relative Line Numbers ............................................................................................. 343
Right ......................................................................................................................... 343
Shifting ..................................................................................................................... 343
Size ........................................................................................................................... 344
Spool Files ................................................................................................................ 344
$Stdin / $Stdinx ........................................................................................................ 344
$Stdlist ...................................................................................................................... 344
String ........................................................................................................................ 344
Tab ............................................................................................................................ 345
Template-T Option ................................................................................................... 345
UDC .......................................................................................................................... 345
Visual Editing ........................................................................................................... 345
Window .................................................................................................................... 346
Workfile .................................................................................................................... 347
Special Characters ................................................................................................................... 347
? Means Help, Nonprinting Characters, Alphanumeric (in Patterns) or Optional (in
Regexp)..................................................................................................................... 347
$ Means Hex, Standard File, Memory Lock, List Option, Previous File or End-OfLine (in Regexp) ....................................................................................................... 347
^ Means Findup, Control-Char, Start-of-line (in Regexp) or Negate (in Regexp) ... 348
. Means Nonprinting, Reset, Decimal Point or Any Character (in Regexp) ............ 349
! Means Posix Command or Too Long .................................................................... 349
% Means Octal or String .......................................................................................... 349
* Means Current, Refresh, Multiply or Quantifier (in Regexp) ............................... 349
\ Means Previous, String, Literal Match (in Regexp) or Special Characters (in
Regexp)..................................................................................................................... 350
/ Means Prompt, Range Delimiter, Stop, Exit, or Divide ......................................... 351
[ Means FIRST, [default] or Start Class (in Regexp) ............................................... 351
] Means LAST or End Class (in Regexp) ................................................................. 351
xii • Welcome to Qedit
Qedit 5.9 for HP e3000 User Manual
{ } Are for Comments or Indentation....................................................................... 351
@ Means ALL .......................................................................................................... 352
& Means Literal Match or Continue MPE Command ............................................. 352
: Means MPE or String ............................................................................................. 352
; Means Multiple Commands ................................................................................... 352
, Means a List ........................................................................................................... 353
= Means Copy or Calculate ...................................................................................... 353
< Means Move, I/O Redirection or Backward Page ................................................ 353
> Means Forward Page, I/O Redirection, Modify or Qhelp..................................... 354
" Means String .......................................................................................................... 354
( Means Start Parameter, Member, Command or Subpattern (in Regexp) .............. 354
) Means End Parameter, Member, Command or Subpattern (in Regexp) ............... 354
+ Means Ahead Some Lines, Add or Quantifier (in Regexp) .................................. 355
- Means Back Some Lines, Minus or Range (in Regexp) ........................................ 355
# Means Numeric Pattern, Spool File or Previous Result ........................................ 355
~ Means Spaces (Pattern), Recent Page or Field...................................................... 356
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • xiii
Welcome to Qedit
Introduction
Welcome to Qedit, the fast, full-screen text editor for MPE and HP-UX. To get into
Qedit, enter this MPE command:
:run qedit.pub.robelle
Qedit version 5.8 has screen-editing, function keys and commands:
Commands:
Add
FINDUp
Open
ZZ
Add(=copy)
FORM
Proc
%ext
Add(
/LISTREDO
F8 Exit
Function Keys:
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • 1
Documentation
Qedit comes with a User Manual and a Change Notice. You may have received
printed copies of these. If you wish to have printed copies, you can order them by
filling out the form on our web site.
Change Notice
For a complete description of the latest changes made to Qedit, the installation
instructions, and any compatibility issues, see the change notice that was included
with the release.
Printed Documentation
The latest user manual and change notice are available in Adobe PDF format. If you
do not already have the Adobe Acrobat reader, you can get a copy from
http://www.adobe.com/prodindex/acrobat/readstep.html. If you wish to have printed
copies, you can order them by filling out the form on our web site.
Documentation Download
You can download the files from the Robelle web site at
http://www.robelle.com/library/manuals/.
Other Documentation
In addition to the Qedit User Manual and Qedit Change notice, there are other
manuals that come with Qedit. Manuals for bonus programs and the contributed
library are available in Robelle's Prose format, not in PDF format. They are found in
the Robelle account on the HP e3000, and are printed using the Printdoc program.
Printdoc prints the manual on your printer, whether LaserJet or line printer.
Printdoc Program
To print them on your printer, whether LaserJet or line printer, run the Printdoc
program.
:run printdoc.pub.robelle
Printdoc is menu-driven, and very easy to use. Printdoc asks you for information,
and if you are not sure of your answer, you can ask for help by typing a question
mark (?) and pressing the Return key. There are two steps for printing a manual:
first, choose one of the manuals on the menu; second, select a printer. Printdoc
supports most types of LaserJet printers and regular line printers.
Other Manuals of Interest
You may want to print at least one copy of these manuals:
2 • Welcome to Qedit
Qedit 5.9 for HP e3000 User Manual
prose.qlibdoc.robelle
spell.doc.robelle
contents.qlibdoc.robelle
howmessy.doc.robelle
{text formatter}
{Bonus spelling checker}
{contributed library}
{Bonus database analyzer}
You can print any Robelle document if you know the file name. If you wish, you can
include the file name in the :Run command. For example, to print the Spell User
Manual, type
:run printdoc.pub.robelle;info="spell.doc.robelle"
Customer Support
When you purchase Qedit, customer support is included for the first year. After the
first year, there is a yearly Maintenance fee. If you are a Right-to-Copy user at a
branch of a larger company, you have two options. If you pay only the one-time
Extra CPU surcharge, then you must obtain your support from your own corporate
resources. If you wish to have support at your own location, you may obtain this by
also paying the regular Maintenance fee. With this yearly support for Qedit, you are
entitled to call with questions. Service also supplies you with a yearly update to
Qedit.
Robelle Newsletter
Do you receive a copy of What's Up, DOCumentation?, our regular news memo
about Robelle, MPE, and HP-UX? We distribute our news memos only to sites with
current service. Your copy may be going to your corporate headquarters.
The lastest newsletter is also available from our Web site at
www.robelle.com/newsletter/.
QLIB and Bonus Contributed Software
Qedit comes with an array of contributed software in the QLIB library (in the QLIB
groups of the Robelle account). The tools in QLIB, such as Prose to print manuals,
can be extremely handy. As well, your Robelle license may entitle you to receive our
Bonus programs: Compare/iX, a file comparison tool, HowMessy, an analyzer for
database efficiency, Select, a menu processor, Spell, an English spelling checker, and
Xpedit, a VPLUS text editor.
If you have the Bonus programs, you may only use them on appropriately licensed
CPUs; you may not give a Bonus program away. However, QLIB programs may be
used on any CPU and given away freely.
To browse through the Robelle account, including QLIB, use our Select "menu"
program. Select allows you to run programs, get help, and print manuals, all without
knowing any MPE commands.
:run select.pub.robelle,qlib
Compare/iX compares two text files (Keep or Qedit format) and prints out the
differences. The basic comparison unit is a line. Compare/iX identifies three types of
differences: lines that are in the first file but not in the second; lines that are in the
second file but not in the first; and lines that are in both files, but don't match. There
is no Classic version of Compare/iX for MPE V.
Qedit 5.9 for HP e3000 User Manual
Welcome to Qedit • 3
HowMessy analyzes a database and prints a report on its internal efficiency, 10 to 20
times faster than similar programs. To access HowMessy, log on as the database
creator in the same group as the database and enter:
:file loadrept;dev=lp;cctl
:run howmessy.pub.robelle
Enter database:CUSTMR
Spell is a spelling checker that reads a file and produces a list of misspelled words.
Spell comes with an 80,000 word English dictionary, and you can add your own
words into global or local auxiliary dictionaries. Spell reads Qedit files, and has an
option to generate an error file that is compatible with the :Editerror command.
Notation
This manual uses a standard notation to describe commands. Here is a sample
definition:
VERIFY
[ @ | ALL ]
[ keyword ...]
1.
UPPERCASE - If the commands and keywords are shown in uppercase
characters in a syntax statement, they must be entered in the order
shown (example: ALL). However, you can enter the characters in either
uppercase or lowercase.
2.
Lowercase, highlighted - These are "variables" to be filled in by the
user (example: keyword). The variables may be highlighted by
underlining or italics. Each such "variable" is defined elsewhere (see
the "Qedit Glossary" on page 331 when you have trouble). In the Help
command, highlighting is not available, so these variables appear
simply in lowercase.
3.
Brackets - enclose optional fields (example: [ALL]).
4.
Braces - enclose comments which are not part of the command.
However, braces and comments are accepted in actual Qedit
commands.
/listq filename {Q means without line numbers}
5.
Up lines - separate alternatives from which you select (example: SET
CHECK [ON|OFF]). The choices are sometimes listed on several lines
without "up lines".
6.
Dot-dot-dot (...) - indicates that the variable may be repeated many
times in the command.
7.
Other special characters - literal symbols that must appear in the
command as they appear in the manual (for example, "=" in Add
linenum = rangelist).
In examples, there is an implied Return key at the end of each line.
Control characters, generated by holding down Control while striking another key,
are either spelled out (e.g., Control-H) or abbreviated with a circumflex prefix (e.g.,
^H).
When Qedit asks you a question, the default answer is shown in [brackets]. The
default is the answer that Qedit will assume if you press only the Return key.
4 • Welcome to Qedit
Qedit 5.9 for HP e3000 User Manual
New to Qedit
Here are a few highlights of the new features in Qedit. For a complete list of
changes, plus details on how to take advantage of all the new features, see the change
notice that accompanied your tape. See the "Documentation" section on page 2 for
instructions on how to print the change notice. All changes discussed in the change
notice have been incorporated into the user manual and help file, but the change
notice gives you everything new in one convenient document.
This section describes the latest enhancements to host-based Qedit and the server
portion of Qedit for Windows. For information about enhancements to the client
portion of Qedit for Windows, see the Qedit for Windows User Manual.
Qedit 5.9 for HP e3000 User Manual
•
UDC’s. UDC commands would stop working after a calc
command that was longer than 138 characters. (5.9)
•
Text command. The text command would fail with Integer Divide
by Zero error when texting in some variable length or bytestream
files. (5.8)
•
Regular Expressions. Qedit would improperly report the error
"String longer than maximum allowed" if the expression specified
is longer than the window of the rangelist. (5.8)
Welcome to Qedit • 5
Installing Qedit
General Installation Notes
Here we describe how to install and configure Qedit, and how to integrate it with
your compiler tools. The following are general notes about installing Qedit.
Who Should Use These Instructions?
Use the following installation instructions if you have just purchased Qedit and
are installing it for the first time. If you already have Qedit on your system, and
are installing an update or pre-release of Qedit, you will find specific
installation instructions in the change notice included with your tape.
TRIAL USERS: Refer to the Robelle Trial Handbook that accompanied your
trial tape.
Summary of Installation Steps
To install Qedit, follow these steps:
1.
Install Qedit
2.
Install the QLIB and/or Bonus programs
3.
Fix the NM compilers (XL only)
4.
Fix the MPE V compilers (both systems)
5.
Save disc space (optional)
Qedit Compiler Interfaces
Qedit edits compact files of a special format called workfiles. In order to be able to
compile these files without doing a Keep command, you must "fix" the MPE
compilers. This applies to the Classic 3000 compilers (CM), which might exist on
either an MPE V or MPE/iX system, and the NM compilers on MPE/iX only. The
methods and installation steps are quite different between the CM and NM Qedit
compiler interfaces.
Many third-party tools either read Qedit files already (e.g., PowerHouse, MPEX) or
can be altered to read Qedit files (techniques for doing this are discussed here).
Qedit 5.9 for HP e3000 User Manual
Installing Qedit • 7
Important Note About Passwords
None of the jobs that we supply have passwords in them. Before streaming a job, you
may have to add your system's passwords to the first line. Users of MPE XL version
3.0 and higher do not have to do this because the operating system prompts for
missing passwords. The same is true for some MPE V users who have security
software that inserts passwords. Most MPE V users have to edit the jobs. For
example, if the system manager logon password is Qwerty, you would do the
following:
:editor
HP32201A.07.22 EDIT/3000
/text robelle.job.robelle
FILE UNNUMBERED
/modify 1
MODIFY
1
!job robelle,manager.sys,pub;hipri
i/qwerty
!job robelle,manager.sys/qwerty,pub;hipri
/keep robtemp
/exit
END OF SUBSYSTEM
:stream robtemp
:purge robtemp
STREAMX Users
Users of STREAMX, a part of SECURITY/3000 from VESOFT Inc., must set a Job
Control Word before streaming jobs. This step prevents STREAMX from generating
an error if the Robelle account does not yet exist. For example,
:setjcw streamxtempnonest 1
:stream robelle.job.robelle
Step 1: Install Qedit
This step requires three separate procedures: restoring all Robelle files from tape to
disc, building (or upgrading) the Robelle account using the job stream that we
provide, and streaming the installation job stream. All these procedures can easily be
accomplished if you log on as Manager.Sys.
Restore Files
First, you have to restore all the Robelle files from tape.
:hello manager.sys
:file rtape;dev=tape
:restore *rtape; @.@.@; create
{log on as system manager}
{mount Robelle tape}
{=reply on the console}
Check the :Restore listing for files that could not be restored because they were busy
for any of the following reasons: someone was using them, they are held as
suspended son processes (menu system), they are allocated, or someone was backing
them up! Chase away any users and deallocate any busy programs. Then try the
:Restore again.
Create/Update Robelle Account
You must build (or upgrade) the Robelle account with the job stream we provide.
Stream the job that builds and updates the Robelle account.
8 • Installing Qedit
Qedit 5.9 for HP e3000 User Manual
:stream robelle.job.robelle
If the Robelle account already exists on your system, the installation job preserves
the current passwords.
If the account does not exist, it is created with the password XXXX. The
Mgr.Robelle user does not have a password. You should change the passwords to
something that will be hard for outsiders to guess.
:altacct robelle;pass={robelle account password}
:altuser mgr.robelle;pass={mgr.robelle user password}
Please note that during installation, we add OP capability to the Robelle account.
When the Qedit installation is complete, you can, if you wish, remove the OP
capability.
File Names
The Qedit program files are located in the Pub group of the Robelle account. These
are the names of the various files:
Qeditnm
Qeditcm
NM Qedit program
Qeditpm
Qcompxl
Qedify
NM compiler interface
Qcompusl
Qloadxl
Ederrnm
CM Qedit programs
CM compiler interface
NM Qedit options
Ederrcm
Qmap
:Editerror support
reformat MPE V PMAP
Install Program Files
Our installation job installs Qedit. No one can be using these programs when you do
the installation. Warn people not to use Qedit for a while, and then stream our
installation job:
:hello mgr.robelle
:warn @;please exit from Qedit NOW!
:stream install.qeditjob
{supply passwords}
Check the installation job $stdlist. If anyone was using Qedit or attempting to back it
up, the job will fail. Chase away any users, ensure that backup is not in progress,
then stream the installation job again.
The installation job renames your current versions of Qedit to the PubOld group of
the Robelle account. If you need to move these versions back into production, use
the Previous.QeditJob job stream.
You can now access Qedit by entering
:run Qedit.pub.robelle
If you wish to print manuals, move Qedit to another account, read on in this chapter
for instructions.
Step 2: Install QLIB and Bonus Programs
Qedit comes with an array of contributed software in the QLIB library (in the QLIB
groups of the Robelle account). QLIB programs may be used on any CPUs and given
away freely. Your Robelle license may also entitle you to receive our Bonus
Qedit 5.9 for HP e3000 User Manual
Installing Qedit • 9
programs: Compare/iX, HowMessy, Select, Spell, and Xpedit. These programs
reside in the Pub group of the Robelle account. Bonus programs can only be used on
authorized machines, and you may not distribute them to your friends.
If you received Bonus programs with this version of Qedit, use the job stream called
Bonus.Job.Robelle to install both the QLIB and Bonus programs. If you did not
receive Bonus programs, use the job stream Qlib.Job.Robelle to install the QLIB
programs. If you skip this step, you may end up running old versions of these
programs.
:hello mgr.robelle
:stream bonus.job.robelle
{or Qlib.Job.Robelle}
Building the Spell Dictionary
The Spell Bonus program requires an additional install job to build its main
dictionary. This job is required if you want to use Spell, and the Spell and Words
commands in Qedit. By default, the American spellings are used. To use British
spellings, modify the line that sets the SpellAmerican JCW so that the JCW is set to
False. This job stream could take 30 to 60 minutes to complete; there is no reason to
wait for it to finish before going on to the next step.
:run qedit.pub.robelle
/text dictmain.spjob
/modify "setjcw SpellAmerican"
/keep robtemp
/exit
:stream robtemp
:purge robtemp
{or use :Editor}
{for British spelling,
}
{
change True to False}
See the Spell user manual for more information on using Spell.
Step 3: Install NM Compiler Interface
On MPE/iX, if you use any NM compilers, you will want to install the new NM
compiler interface. If you still use the CM compilers as well, you will want to install
that compiler interface too, as described under step 4.
Installing the Interface
Assuming that you have Restored the Robelle files onto your system and that you
have not done this step before, stream Savecmdf.Qeditjob to make backup copies of
the existing HP command files in the Stdcmd.Sys group. You need to know the
Manager.Sys password:
:stream savecmdf.qeditjob.robelle {wait for it to finish}
:listf @.stdcmd.sys
Then stream Qcompxl.Qeditjob to make changes to the Pub.Sys compiler command
files.
:stream qcompxl.qeditjob.robelle
This stream makes the following changes to the files:
1.
Change the run of the compiler program to
;xl ="qcompxl.pubnew.robelle, qcompxl.pub.robelle",
2.
10 • Installing Qedit
Add ";shr" to the File commands for the text and master files.
Qedit 5.9 for HP e3000 User Manual
Compiling Instructions
At any point, either within Qedit or at the MPE/iX prompt, you now should be able
to compile a Qedit file or a Keep file, just by invoking the normal command file:
:pasxl source
:run qedit.pub.robelle
/pasxl source
{from MPE}
{from Qedit}
Within Qedit, you can specify "*" for the current workfile:
:run qedit.pub.robelle
/text source
/pasxl *
/exit
:pasxl qeditscr
Step 4: Install CM Compiler Interface
When installing Qedit on MPE/iX, you may have to install the NM compiler
interface (described earlier) and the CM compiler interface (described here). MPE V,
on the other hand, has only the original "CM" compilers to worry about. After
Restoring the files from tape, you have to choose an installation method: integral or
isolated.
Choosing a CM Installation Method
There are two methods of fixing the compilers on your system: integral into Pub.Sys
or isolated in the Robelle account. The isolated method is best for new or trial-period
users, because it is faster to install and easier to remove later. You can start with the
isolated method and convert easily to the integral method later.
Integral Method. The compilers in Pub.Sys are "fixed" directly and a segment is
added to the System SL. The standard :Cobol and :Pascal commands of MPE will
then compile Qedit workfiles. :Sysdump is used to make a new cold load tape for the
next time you must boot the system.
Isolated Method. The MPE compilers are copied into the Q.Robelle group and the
original compilers are left in the Pub.Sys group. No code is added to the System SL.
Because the "Qedit" compilers are not in Pub.Sys, you cannot compile Qedit
workfiles except from within Qedit.
Integrating CM Compiler Changes
The job stream Qeditj1.Qeditjob.Robelle makes integral compiler fixes. Use it either
to update the fixes to a new version or to re-install the fixes after a MPE update from
HP. Because this job modifies the compiler program files in Pub.Sys, you should
:Store @.Pub.Sys before starting and save the tape. You need another small tape for
a new cold load tape.
Ensure that no one compiles until the installation is complete. Stop all jobs and send
an operator warning. Log on as Manager.Sys, modify the first line of the Qeditj1 job
to include the passwords, then :Stream the job.
:stream qeditj1.qeditjob.robelle
The job runs Qedify.Pub.Robelle to update the compilers in Pub.Sys and install
nonprivileged hooks into them, so that they can access Qedit workfiles. The job adds
Qedit 5.9 for HP e3000 User Manual
Installing Qedit • 11
a code segment from Qcompusl.Pub.Robelle into Sl.Pub.Sys and then requests a tape
mount for a new cold load tape.
Mount a tape with a write ring and :Reply. Save this tape and use it for any future
cold loads. The CM compiler interface is now installed. Compiles done inside or
outside Qedit work on either Qedit workfiles or on regular Keep files.
Isolating CM Compiler Changes
The job stream Qeditj1a.Qeditjob.Robelle fixes the compilers, but isolates the
changes in the Q.Robelle group. Ensure that no one compiles until the installation is
complete. Stop all jobs and send an operator warning. Modify the first line of
Qeditj1a to include the Robelle password, then stream the job:
:stream qeditj1a.qeditjob.robelle
The job uses Qedify.Pub.Robelle to copy the compilers from Pub.Sys to the
Q.Robelle group, then "fix" them to read Qedit files. The original compilers in the
Pub.Sys group are not modified. Once this step is completed you can use the CM
compilers on Qedit files from within Qedit, but not at the MPE prompt.
Step 5: Saving Disc Space
There may be obsolete or unnecessary files in the Robelle account that you can
remove to save disc space.
Purging Obsolete Files
If you have been a Qedit user for several years, you may have obsolete files in the
Robelle account. For example, the file Qapply.Doc.Robelle is an older version of
part of the Qedit User Manual. It should be purged.
To remove all obsolete files that were part of the Qedit product, stream the job
Obsolete.Qeditjob.Robelle.
Minimal Set of Files
If you are extremely short of disc space, you can purge many files in the Robelle
account after you complete all installation steps. The only files you must have to run
Qedit are those listed below. Of course, if you have other Robelle products such as
Suprtool, you do not want to purge the files needed for them, which are listed in their
User Manuals.
Filename
Purpose
qedit.pub.robelle
qloadxl.pub.robelle
optional NM run-time
qeditpm.pub.robelle
allows BS priority
qcompxl.pub.robelle
MPE/iX only
qedify.pub.robelle
CM compiler interface
qcompusl.pub.robelle
CM compiler routines
@.q.robelle
copies of CM compilers
qedit.help.robelle
qedhint.help.robelle
12 • Installing Qedit
Qedit 5.9 for HP e3000 User Manual
qzmodhlp.help.robelle
qmap.pub.robelle
for QMAP in :Prep command
prose.qlib.robelle
to print manuals, you need this
f92286f.qlibdata.robelle
and at least one font files
There are a number of jobs in the Purgejob.Robelle group which can help clean up
the Robelle account of unwanted files. One in particular that you may want to use is
Cleanup.Purgejob.Robelle. After you have completed the Qedit installation, Cleanup
gets rid of all the pre-installation files.
:stream cleanup.purgejob.robelle
Moving Qedit to Another Account
Although the Qedit program file is normally installed on the system
Qedit.Pub.Robelle, you can move the program to any account and group that has PH
and DS capability. There are some file names that are built into Qedit:
Filename
Purpose
qedit.help.robelle
the Qedit help text
qedhint.help.robelle
the hint-of-the-day file
qzmodhlp.help.robelle
help text for Qzmodify
qmap.pub.robelle
for QMAP option of :Prep
cobol.q.robelle
etc., the CM compilers
qeditmgr.pub.robelle
a configuration file
qloadxl.pub.robelle
NM run-time routines
Moving All the Files
Qedit follows the location of the program file in deciding what file names to open. If
you move the Qedit program to the PUB group of the UTIL account, Qedit looks for
the files listed above in that account rather than Robelle. If Qedit resides in a group
named Pubnew (or Pubxxx), the three "help" files will be searched for in HELPNEW
(or HELPxxx). The Qeditmgr file is always assumed to be in the same group as the
Qedit program, while Qmap must be in the Pub group and the CM compilers in the Q
group.
Qedit 5.9 for HP e3000 User Manual
Installing Qedit • 13
:hello
:fcopy
:fcopy
:fcopy
:fcopy
mgr.util,pub
from=qedit.pub.robelle;to=qedit.pub.util;new
from=qloadxl.pub.robelle;to=qloadxl.pub.util;new
from=qedit.help.robelle;to=qedit.help.util;new
from=qedhint.help.robelle; &
to=qedhint.help.util;new
:fcopy from=qzmodhlp.help.robelle; &
to=qzmodhlp.help.util;new
:fcopy from=qmap.pub.robelle; &
to=qmap.pub.util;new
Redirecting the File Names
The Verify Account command shows what account Qedit searches for the Qeditmgr
file, Qmap.Pub, and the CM compilers. Use Set Account to override the default. The
Verify Filename command shows the names assumed for the "help" files and Set
Filename allows you to override them.
Suppose you run Qedit in the Util account, but you don't want to move the rest of the
files to that account. You would use Set Account Robelle and Set Filename
commands to force Qedit to look back into Robelle for the files instead of in Util.
Moving a "Hooked" Qedit
When you install MPEX and the Vesoft account, they make a copy of Qedit in
Pub.Vesoft and "hook" it for closer cooperation with MPEX.
:run qedit.pub.vesoft;lib=p
Since Qedit looks for compilers, help files, and other supporting files in the same
account where the program resides, the hooked Qedit looks for those files in the
Vesoft account. If you are on MPE/iX and you want I/O redirection of command
files, copy the file Qloadxl from Robelle to Vesoft. Put the following Set commands
in a configuration file named Qeditmgr.Pub.Vesoft:
/set
/set
/set
/set
/set
account robelle
{e.g., Cobol.Q.Robelle}
filename help qedit.help.robelle
filename hint qedhint.help.robelle
filename qzmodhlp qzmodhlp.help.robelle
extprog mpex.pub.vesoft com on
The Set Extprog command assumes that you want Qedit to explicitly pass %
commands to MPEX, rather than have the "hook" intercept all % lines at every
prompt in Qedit. It is desirable to handle % commands within Qedit this way, rather
than through the hook, because it ensures that your current workfile is properly
posted to the disc and it allows you to Add % commands into a file as data without
executing them. To achieve this result, you must rehook Qedit with the Nopercent
option:
:run mpex.pub.vesoft
%hook qedit.pub.robelle;nopercent
{SM or Vesoft logon}
You may not find that you need a hooked Qedit, now that Qedit has a :Listredo stack
and accepts the VESOFT-style shorthand ("," for Redo). Some remaining benefits of
hooking Qedit are that the System Manager can Keep across account boundaries (but
watch out for Creator name), and ACD information is retained from Text to Keep.
Running the MPEXHOOKed Qedit
The MPEXHOOK procedure, which intercepts file system calls made by Qedit, is
activated differently based on whether the program to be executed is a native-mode
14 • Installing Qedit
Qedit 5.9 for HP e3000 User Manual
or a compatibility-mode program. On Classic systems, or on Spectrum systems
running compatibility-mode or OCT-mode Qedit, you run the hooked program with
lib=p.
:run qedit.pub.vesoft;lib=p
Lib=P works equally well with the native mode version of Qedit. However, with
Qedit/iX, you can specify an XL file instead of the Lib parameter:
:run qedit.pub.vesoft;xl="mpexhknl.pub.vesoft"
The hooked version will work version either way. The Lib parameter is there for
MPE compatibility reasons (Classic vs PA-RISC). The XL file parameter is the
"correct" way of doing it on MPE/iX.
The following sample User Command, which can be used to run the hooked version
of Qedit, determines if Qedit is native-mode or compatibility- mode, and invokes it
accordingly.
parm runparm=0
if finfo("qedit.pub.vesoft",9)="NMPRG" then
run qedit.pub.vesoft;xl="mpexhknl.pub.vesoft";parm=!runparm
else
run qedit.pub.vesoft;lib=p;parm=!runparm
endif
VESOFT advises that you be running MPEX version 23.11115 or later, so that the
Keep-across-accounts feature will work properly with Qedit/iX.
If Qedit/iX aborts with quit parm -50 or -1041, this indicates that the MPEXHOOK
support routines are not correctly installed on your system. You will have to stream
the VESOFT-supplied job Veproc.Job.Vesoft. If the hooked Qedit/iX still aborts
after running this job, you will need to contact VESOFT for a software update.
Removing the Compiler Interface
If you remove Qedit from your system, you will want to revert to the original MPE
compilers. Once you remove the compiler interface you can no longer compile Qedit
workfiles. you may either Keep them with Qedit, or use the contributed program
Qcopy.Qlib.Robelle to convert them to Keep files.
If you did an integral installation of the CM compiler interface, you now do an
integral removal. If you did an isolated installation, you now do an isolated removal.
Removing the NM Interface
Reverting to the original NM compilers is a simple matter of going back to the
original command files. You should have saved those in @.Stdcmd.Sys. Purge the
command files in Pub.Sys, such as Pasxl, and Rename or Copy the originals from
Stdcmd.Sys.
Removing the Integral CM Interface
Qeditj3.Qeditjob.Robelle removes the Qedit CM compiler interface that had been
integrated into MPE. The original compilers are Restored and the CM Interface is
removed from the system SL. If you are on MPE V, a new cold load tape is created.
Ensure that no one compiles for the next half hour. Stop all jobs and send an operator
warning. Log on as Manager.Sys, modify the first line of the Qeditj3 job to include
the passwords, then :Stream the job.
Qedit 5.9 for HP e3000 User Manual
Installing Qedit • 15
Qeditj3 first attempts to :Restore the original compilers from a backup tape (you can
use the last Hewlett-Packard update tape). Mount the tape and :Reply on the console.
It then removes the Qedit interface segment from Sl.Pub.Sys and requests a tape to
make a new cold load tape. Please mount a blank tape with a write ring and :Reply.
Save this tape and use it on your next cold load.
Removing the Isolated CM Interface
Qeditj3a.Qeditjob.Robelle removes the isolated CM compiler interface from the
Robelle account, leaving you only the original ones in Pub.Sys. Ensure that no one
compiles or uses Qedit until this job finishes. Stop all jobs and send a warning to all
users. Modify the first line of Qeditj3a to include the Robelle account password and
stream the job.
Qeditj3a purges fixed compilers from the Robelle account, removing the interface.
16 • Installing Qedit
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP
Full-Screen Editing
Introduction
Qedit aims to provide everything an MPE or HP-UX programmer could need to
write COBOL, PowerHouse, or other programs, and to prepare documentation.
Therefore, Qedit has Line mode for batch editing and full-screen mode for
interactive editing. On HP terminals, Qedit's full-screen mode is called Visual mode.
Qedit's Visual mode is a powerful but friendly full-screen editor designed
specifically for programmers. It gives you full access to the editing capabilities of
your terminal in block-mode, with low system overhead. You can move, copy, mark
and delete blocks of text with Visual's cut-and-paste functions, and page backward
and forward through your file with function keys. To use Visual mode, you must
have an HP terminal or an HP terminal emulator (e.g., Reflection from WRQ).
NOTE: As of HP-UX 11.0, HP has dropped support for block-mode terminals. For
this reason, full-screen editing is only available in Screen mode on HP-UX 11.0 and
later.
In Visual mode, you have access to all Line mode commands (including UDCs,
command files, compiling, linking and running programs, shell scripts, and string
searching and changing). Qedit's search and replace functions aim to be simple, fast
and powerful (e.g., ignore embedded words, etc.). The Undo command allows you to
cancel any previous edits to your file, working back to the state at which you started.
Using the optional Open and Shut feature, you can switch between files instantly.
With the Justify command, the Prose text formatter and the Spell checker, you can
format documents such as memos and manuals.
Visual mode is a good introduction to the HP operating systems for users who don't
work on HP computers all day. Those who may particularly benefit are novice users,
or users who run Qedit only to update a report skeleton once a week. These
occasional users no longer have to memorize editing commands. Visual mode
provides a familiar environment where novices can make changes to the entire
screen, just as they do on PC editors. You can even configure some electronic mail
packages (HPDesk, elm), to put your users directly into Visual mode when they edit
a message.
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 17
Starting Visual Mode
After you have invoked Qedit, and Texted or Opened a file, you switch from Line
mode to Visual mode by typing VI or pressing F1. If you don't have a file open,
Qedit opens a scratch file and, if empty, fills it with a screenful of blank lines.
VI [ linenum | "string" ] or press F1
(Default: linenum = *)
Whereas in Line mode you type in command and text lines ending each with a
Return, in Visual you edit a full screen of text in block-mode using the terminal
keyboard. Since your terminal is off-line from the computer, you can use its cursor
and editing keys. You edit by moving the cursor around the screen, inserting and
deleting lines and characters. Press Enter to save your changes. To move through the
file, you have the convenience of eight function keys, such as F6 Forward One Page.
Visual mode in Reflection for Windows, showing cut-and-paste indicators
You copy, move, hold, and delete blocks of text easily by placing "cut-and-paste"
indicators at the start of the line. You may type Line mode commands at the home
line ===> and execute them via the Enter or the F7 key. Combining the cut-andpaste functions with the Open and Shut commands, you can also copy and move text
quickly between different Qedit files. Use the ZZ cut-and-paste indicator with any
command to mark text easily.
The Set Visual command controls how Visual mode operates and allows great
latitude in configuring Visual to your own liking. For example, you can choose to
have automatic update; decide where the current line or cursor appears; and select
how many lines will carry over when you page up or down.
When you are done, exit Visual mode using F8, then Keep or Shut your file. Press F8
again to leave Qedit.
18 • Getting a Quick Start with HP Full-Screen Editing
Qedit 5.9 for HP e3000 User Manual
Screen Layout
===>
Okay 1691.75 WFILE.DOC.TACCT "verify"(u)
* procedure abc;
+1 begin
+2
integer def;
// ....+....10...+....20...+...
Move Ready
The screen starts with the home Line, followed by the status Line, several text
Lines, and ends with the template Line. Columns 3 and 4 of text lines sometimes
contain special characters and are called the indicator columns.
Home Line
You type commands, search for strings and for line numbers after the ===> on the
home line.
===>
These are executed when the F7 or Enter key is pressed.
The home line is also used by Qedit to print error messages. You must clear the error
message by pressing the F7 or Enter key before you can type another command in
the home line.
Status Line
The second line shows the status, the current line number (i.e., that of the * line), the
name of the file you are editing, the current string with its window, and any pending
cut-and-paste task.
Okay
1691.75
WFILE.DOC.TACCT
"verify"(u)
Move Ready
If you have Texted a file into Qeditscr, the status line shows the name of the Text
file, which is also your default Keep file.
Text Lines
By default you see the * (current) line and 19 lines after it. Each line is prefixed by
the relative line number, and two columns for special indicators.
*
+1
+2
procedure abc;
begin
integer def;
Use Set Vis Above and Set Vis Below to adjust the number of lines shown above
and below the current line.
Template Line
The last line has // and a column template. The // signals end-of-screen to Qedit and
must not be erased.
//
....+....10...+....20...+...
Visual uses more than 76 columns for text on Reflection, Qcterm, a 2393/97, 2626,
or 700/9x terminals.
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 19
Special Indicator Columns
Qedit leaves columns 3 and 4 of the text lines for you to enter cut-and-paste
operators (i.e., MM, CC, HH, etc.). Also, Qedit may print one of two special
indicators in these columns:
!
line extends beyond the visible right margin
?
line contains control characters, shown as dots
An ! means the line extends beyond the right terminal margin. To shift the screen
image left, type Set Left 55 at the Visual home line and press F7.
A ? means the line contains nonprinting characters such as Nulls, Escapes, Bells,
Tabs or possibly Roman-8 extended characters. Qedit replaces these characters with
dots (.) in Visual mode, and does not allow you to make changes. These ? lines are
not updated when you press Enter.
To edit Bells, Escape sequences, Tabs, ShiftOuts and ShiftIns in Visual, use Set Vis
Bell, Set Vis Esc, Set Vis Tab, Set Vis SO and Set Vis SI. All these specify
substitute characters to be shown instead of dots. To edit other control codes, use
Modify or Change from the ===> line. If you turn Set Editinput Extend Off, Qedit
regards Roman-8 characters as nonprinting noise and show them as dots.
Using Your Keyboard
In Visual mode, the keyboard gives you the power to move around the screen, edit
text, and control the flow of Qedit.
Moving the Cursor
You move around the screen using the cursor keys and others:
Cursor Left
Move one space to left
Backspace
Move one space to left
Cursor Right
Move one space to right
Cursor Up
Move one space up
Cursor Down
Move one space down
Return
Down to next line, back to column 5
Home Up
Move to ===> line
Shift-Home
Move to bottom of screen
Tab
Move to next right Set TAB column
Shift-Tab
Move to next left Set TAB column
Prev Page
Only moves around terminal memory
Next Page
Only moves around terminal memory
Editing the Text Lines
You revise the screen image using these keys:
Space bar
20 • Getting a Quick Start with HP Full-Screen Editing
Move cursor right and erase character
Qedit 5.9 for HP e3000 User Manual
any char
Overwrite cursor and move it right
Del Char
Remove character at current cursor
Ins Char
Enable "insert"; use again to disable
Ins Line
Insert blank line above current line
Del Line
Delete line at current cursor
Clear Line
Erase to the end of the line
Clear Display
Avoid! Recovery: Home Up,*,F7
To save the changes you have made on the screen,
Enter
Send screen image to Qedit, update file
Control Functions
To return from Visual mode to Line mode:
F8
exit from Visual
Some other keys:
Select
Useless in Qedit
Stop
Do not use in Visual
Break
Disabled in Visual
Reset
Use if screen locks up, press Enter
Esc
First key of Escape sequences
Del
Does not delete anything!
Reflection for DOS Keyboards
If you are using a PC with Reflection for DOS, you need to map the PC keys into the
HP keys.
Note that the PC keyboard has two keys labeled Enter, which are used differently in
Qedit. The Enter key above the Right Shift key is called the Return key in this
manual, and is used to execute commands in Line mode. In Visual mode, this key
moves the cursor down by one line. The other Enter key (on the numeric keypad) is
called the Enter key, and is used to update the screen in Visual mode.
Here are the default Reflection keystrokes for common functions:
Terminal Keyboard
Reflection Key Sequence
Enter
Enter on the numeric keypad. If that doesn't work,
try the "+" on the numeric keypad, or try Shift-F10
Home Up
Control-Home
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 21
Shift-Home
Control-End
Ins Line
Alt-I
Del Line
Alt-D
Clear Line
Alt-K
Clear Display
Alt-J (avoid in Visual!)
User keys
F9
System keys
F10 (then F7 for help)
Additional Functions
Reflection Key Sequence
Begin Line (Column 1)
Home
End Line
End
Help about Reflection
Alt-H
Exit
Alt-X
Other PC Keyboards
AdvanceLink is similar (Alt-H is help, Alt-I is Insert Line, Alt-D is Delete Line), but
Clear Line is Alt-L, and Enter is Alt-F3. Other terminal emulators have their own
keystrokes for common functions. See your emulator's manual for details.
Function Keys
Much of the convenience of Visual mode is due to the power built into the eight user
function keys: F1 through F8.
F1
Update and go to next page
F2
Roll Up Screen n lines, as per Set Vis Roll
F3
Findup (search back for current string)
F4
Find (search ahead for current string)
F5
Backward One Page
F6
Forward One Page
F7
Execute command typed in ===> line
F8
Exit from Visual back to Line mode
F1: Update and Go to Next Page
Qedit reads the current page and updates the file, then displays the next page. The F1
key combines the Enter key and F6 (Forward) in a single key. However, F1 does not
execute any command typed in the home line as the Enter key would.
F2: Roll Up Screen
Qedit clears the screen and displays a new one that is rolled up n lines (default: 6),
where n is controlled by Set Vis Roll.
22 • Getting a Quick Start with HP Full-Screen Editing
Qedit 5.9 for HP e3000 User Manual
F3: Findup - Previous String
Qedit searches backward in the file, starting from the * line, until it finds a line that
contains the current string. Qedit clears the screen and displays a new page, with *
positioned at the line that contains the found string. Visual also displays the target
string on the Status line.
Before you can use F3, you must establish the string for which to search. Type the
string in quotes prefixed by a circumflex (^"string") at the ===> on the home
line and press F7, to do the first Findup.
F4: Find - Next String
Qedit searches forward in the file, starting from the * line, until it finds a line that
contains the current string. Qedit clears the screen and displays a new page, with *
positioned at the line that contains the found string. Visual also shows the target
string on the Status line.
Before you can use F4, you must enter the target string. Type the string in quotes
("string") at the ===> on the home line and press F7, to do the first Find.
F5: Backward One Page
Qedit clears the screen and displays the previous page. By default, the top line of the
original screen becomes the bottom line of the new screen. Use Set Vis Carry to
change the number of lines carried over to the new screen.
F6: Forward One Page
Qedit clears the screen and displays the next page. By default, the bottom line of the
original screen becomes the top line of the new screen. Use Set Vis Carry to change
the number of lines carried over to the new screen.
F7: Execute a Command
Use the F7 key to execute commands. The current screen is not updated, unless you
have Set Vis Update On. Type whatever command you want to execute after the
===>. This includes "strings" to find, Qedit Line mode commands such as Open or
Justify, MPE commands, calculator commands (=5/6), and special Visual commands
(e.g., * for Refresh, ? for Help). Then press F7. Qedit reads only the home line and
executes the function. To first save your screen changes and then execute, use Enter
instead of F7.
See the section "Home Line Commands" for complete details.
F8: Exit from Visual
To return from Visual mode to Line mode, use the F8 key. Press F8 again once you
are in Line mode to exit Qedit and return to MPE (: prompt). If for some reason F8
fails to exit from Visual, type / at the ===> and press F7 or the Enter key. This
should get you back to Line mode.
Browsing Through Your File
Line Number. Move to a specific line (e.g., to line 45).
===>45 F7
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 23
> and <. Move ahead or back a page. Use with a number to move several pages (e.g.,
ahead 3 pages).
===>>3 F7
+ and -. Move forward or backward any number of lines (e.g., back 200 lines). If
you do not specify a number, the default is the number of lines configured by Set Vis
Roll.
===>-200 F7
~ The Tilde Key. Return to the "most recent" screen. If you jump from line 1500 to
line 451, ~ sends you back to 1500. This is handy if you jump briefly to another part
of your file to check something then want to get back to your original location.
The tilde is also available from line-mode but it has to be enabled by removing it
from the list of string delimiters. In order to do this, you could do the following:
/V stringd
Set STRINGDelimiters "|\~{}[]_@?!#>%&:'"
/S stringd "|\{}[]_@?!#>%&:'"
Notice that tilde has been removed from the delimiter list entered on the Set
command.
===>~ F7
FIRST and LAST. Move to start or end of file.
===>first F7
Scrollup Character. This character can be entered in the cut-and-paste columns to
scroll up in the file. A single character scrolls the number of lines defined by Set
Visual Roll. If the character is entered more than once, Qedit scrolls up that many
times the number of Roll lines. For example, enter 4 minus signs anywhere to scroll
4 X Roll lines. The default scrollup character is a minus sign. It can be changed to
something else with Set Visual Scrollup.
Cut-and-Paste
It is never necessary to remember line numbers in full-screen mode. Visual allows
you to mark, hold, move, copy, replicate, or delete a block of text, all visually. This
is called "cut-and-paste" and is done by putting special indicators in the two blank
columns at the left of each text line before you press the Enter key. For example, DD
indicates a block of text to be deleted.
Cutting Operations
Order Is Not Important (But One at a Time). You can enter the indicators in any
order and on different screens, but 10,000 is the maximum number of lines you can
cut. When you have defined a complete cut-and-paste task, Qedit completes the task
and removes the indicators. You can only perform one cut-and-paste task at a time.
Single Line
Block of Text
Function
M
MM
Move line or block of text
C
CC
Copy line or block of text
D
DD
Delete line or block of text
H
HH
Hold a line or block of text
HJ
Append block of text to Hold file
24 • Getting a Quick Start with HP Full-Screen Editing
Qedit 5.9 for HP e3000 User Manual
Z
JJ
Justify a block of text
ZZ
Mark a line or block of text
XX
Exclude a block of text from the display
Pasting Operations
A
Insert text "after" this line (or use F for "following")
B
Insert text "before" this line (or P for "preceding")
AH
Insert Hold file after this line (or use FH)
BH
Insert Hold file before this line (or use PH)
A0
Insert Hold0 file after this line (or F0)
B0
Insert Hold0 file before this line (or P0)
R
A line to be replicated after itself
Rn
A line or block to be replicated n times (max. 9). (See "Copying a Block
of Text" below.)
Display Enhanced. When the cut-and-paste task is partly defined, Qedit highlights
the indicated lines and adds a warning to the status line.
Resetting Cut-and-Paste
You can cancel a pending cut-and-paste task (if you have not pressed the final Enter)
by entering a period (.) in the ===> line and pressing F7.
===>. F7
Copying a Block of Text
Paste One Copy at a Time. Suppose you want to copy a section of text from one
place in your file to another. Here is one way to do it. First, locate the screen
containing the start of the block that you want to copy, using a string search via the
home line. Move the cursor down to the first line you want to copy, then press
Cursor Left twice and type "CC" in the blank columns provided. Press Enter and you
should see that line highlighted in inverse video.
Second, find the end of the text section and mark the last line with another "CC".
After you press Enter, you should see the entire block highlighted.
Third, go to the screen where you want to insert a copy of the text. Move the cursor
down to the line before the desired insertion point, Cursor Left once and type "A"
(for after). Press Enter and the block should appear.
Paste Multiple Copies at Once.
When working with a block of text, you can use the same cut-and-paste codes to
mark the beginning and the end of the block (i.e., HH on the first line of the block
and HH again on the last line). The only exception to this is the block replication
code.
In this case, you would use RR to mark the beginning of the block and Rn to mark
the end of the block, where n represents the number of times you want that block
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 25
replicated. For example, to have the same block replicated five times, you would
enter R5. The new blocks are inserted immediately after the last line of the copied
block.
The original lines marked for replication are written to the Hold0 file.
Cut-and-Paste Between Files
Using Visual mode's cut-and-paste functions, you can copy and move blocks of text
between files.
You can only edit one file at a time in Qedit, but you can switch quickly between
different Qedit files by Opening and Shutting them.
/o file1
Open file1
/o file2
Shut file1
Open file2
/o *
Shut file2
Open file1
/o *
Shut file1
Open file2
List * = 20
{implicitly shuts file1}
List * = 48
{open the last file that was shut}
List * = 20
{open the second file again}
List * = 48
Note: The * shortcut refers to the last Qedit file that was shut.
Now, to copy a block of text from file1 to file2, use HH twice (just as you would use
CC) to hold the block in file1. Then, open file2, and use AH or BH to paste in the
text from the Hold file. To move a block from file1 to file2, use the DD function to
delete the block of text from the first file. The deleted block is stored in a temporary
Hold file called Hold0 (Hold-zero). Now immediately open file2 and use A0 or B0 to
paste in the text from Hold0.
Dividing and Gluing Operations
Single line
V
a single line to be diVided
G
a single line to be glued
GJ
a single line to be glued with a space inserted
Block of text
VV
begin or end of the block to be diVided
GG
begin or end of the block to be glued
Dividing Lines in Visual Mode
To divide a line, use the V (diVide) cut-and-paste function in column 3 or 4, then
insert the special field separator ("~") at each division point in the line. The default
field separator is tilde ("~" ), but you can override this with Set Vis Field. If no "~" is
found in the line, a blank line is added after the line.
26 • Getting a Quick Start with HP Full-Screen Editing
Qedit 5.9 for HP e3000 User Manual
What about dividing all the lines in a range? Use VV to mark the start and the end of
the line range, then place the field separators in the first line of the range. Every line
of the range is divided at the specified field columns. If no "~" is found, a blank line
is added after each line.
When marking several division points, insert them into the first line of the block
from right to left. As you insert them, they shift the following text to the right one
space each. Otherwise, if you insert them from left to right, it is difficult to select the
proper division point for subsequent fields.
Gluing Lines in Visual Mode
To Glue the next line to the current line, use a G in column 3 or 4. To Glue two lines
with a space inserted at the joint, use GJ in columns 3 and 4.
To glue "pairs" of lines within a block, use GG to mark the start and end of the
block.
By default, G and GG append text after the last nonblank character in a line, but it is
also possible to glue text to specific columnar fields. You do this by inserting a field
separator at the start of each field (mark the first line only). The default field
separator is the tilde ("~"), but you may override this with Set Vis Field. If you
specify three fields, G glues the next three lines to the first line. GG glues the next
three lines to the first line, and then go on to the next group of four lines. If the
precise column number where each field starts is important to you, insert the field
separators from right to left, since each one that is inserted shifts the column
numbers that follow off by one more.
Excluding Lines From Visual Mode Display
The XX indicators are used to mark lines that you do not want displayed in fullscreen mode. Once marked, the block of text is replaced with a single line.
--- Excluded Area --- 10/34.5
This line shows the line numbers which are currently excluded. An excluded area
setting is saved in the workfile so it's preserved across Open/Shut commands. To
reset the excluded area and see the original lines again, type .xx on the Homeline
and press Enter or F7.
The excluded area can also be defined using Set Visual XX. The current excluded
area is displayed on the Verify Visual output.
Restrictions
The Excluded Area line must not be removed, altered or used in any way. This
also means that you can not enter any indicators in the cut-and-paste area. If you
wish to paste lines before or after the excluded area, you should use the appropriate
cut-and-paste indicators on the line that immediate precedes or follows the
Excluded Area line.
An excluded area can not be included in any other block operation such as ZZ, CC,
MM or other XX.
If any of these rules are broken, Qedit displays an appropriate error message.
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 27
Justifying Lines in Visual Mode
Justification in text alignment is available in full-screen mode. To justify a block of
text, simply mark the first and last lines in the block with the JJ indicator. If Qedit
uses any justify default settings, they are defined by the Set Justify command. If
there are no default settings, Qedit assumes the text should be justified within the
current display width.
The justified lines are written to the Hold0 file. A single J indicator is not valid.
Renumbering Lines
When the insertion point is on the current screen, Qedit renumbers the screen if
needed (and if Set Vis Renum is ON).
Inserting Blank Lines
When entering a lot of new text, it is tiresome to keep pressing Ins Line for each new
line. To insert a block of 10 blank lines quickly, press Ins Line to create one blank
line, Cursor Left twice, type R9, and press Enter. This reproduces nine copies of the
blank line immediately after it (as well as updating the paragraph you just finished
typing). Repeat as needed.
Hold Files
Visual has both an implicit and an explicit Hold file.
The Implicit Hold0 File. Any block processed by the CC, MM, JJ, RR, or DD
indicators is also written to a disc file called Hold0 (Hold-zero). This allows you to
copy the lines back into your workfile using A0 or B0 (add from Hold0, After or
Before the line on which you place the indicator).
The Explicit Hold File. The HH indicator writes a block to the Hold file without
moving or modifying it. Use H for a single line. To copy the line(s) back into your
workfile, use AH or BH. You may need a Hold file when creating a file that you
want to compile, or when using the Use command. You must use HH (instead of CC)
for copying text from one file to another.
When HH is used to mark the beginning and end of a block, it copies the block of
text to the explicit Hold file. With the HH indicator, the current contents of the Hold
file are erased and replaced with the marked lines.
If you want to append a block of text to the Hold file, you can use the HJ indicator.
HH or HJ can be used to mark the first line. However, HJ must be used to mark the
last line. You cannot hold-append a single line of text, which means you can append
only two or more lines. With the HJ indicator, the current contents of the Hold file
are preserved and the block of text is appended to it.
Marking Changes Without Using Line Numbers
The ZZ indicators mark a group of lines that you want Qedit to remember. Use Z to
mark a single line. Note: "Z" for a single line is valid only in Visual mode; in Line
mode, use "ZZ" to mark a single line. See the ZZ command in the "Qedit
Commands" chapter for further information. Once marked, the lines are displayed at
half-bright intensity and you can refer to them in any home line command by using
ZZ where the line numbers are expected. This is especially useful when listing lines
to the printer, changing or appending strings, and formatting text:
28 • Getting a Quick Start with HP Full-Screen Editing
Qedit 5.9 for HP e3000 User Manual
===> list $lp zz F7
===> change "bob"Robert" zz
===> verify zz
===> zz off
F7
F7
{check current ZZ range}
F7
{cancel ZZ range}
Paste from a Non-Qedit File
If you want to copy text into your current workfile from another file that is not a
Qedit file, you cannot use the methods described above. You cannot Open the second
file if it is not in Qedit format. Instead, use the List command to find the portion of
text that you want to add from it (without Shutting the first file). Then, use the Add
command to paste in the text.
===>list xxx
===>add * = xxx 10.7/22.9
Home Line Commands
All Qedit commands are supported in Visual mode. To do a command, such as Listf
or ls, press the Home Up key to reach the home line, then type your command after
the ===> and press F7 or Enter. To execute a command, such as Change, on a subset
of the file, first use the ZZ cut-and-paste indicators to mark the subset and then use
ZZ in the command. After most ===> commands, Qedit prompts you for more
commands ("Next command [Visual]"). Type in more commands, or return to your
Visual screen above, by pressing the Enter or Return key.
Qedit accepts each command, executes it and goes back to the "Next command"
prompt. There are a few exceptions to this process. By default, when you enter an
Open command, Qedit assumes you want to edit the file immediately and switches
into full-screen mode automatically. If you wish to disable this feature, enter Set
Visual Editonopen Off.
If the tilde has been removed from the list of string delimiters (see Set
Stringdelimiters) and you enter a tilde "~" at the "Next command" prompt, Qedit
uses the current line number associated with the tilde, makes it the current line and
goes back into Visual immediately.
Finding Strings
To search for a string, simply type it in quotes at the ===> line and press F7 or
Enter.
===>"string"
F7
Qedit will find the next line containing that string, display the page around it, and
show the target string in the Status line. To find the next occurrence of the same
string, press F4.
To find the previous occurrence of a string, prefix the string with a circumflex.
===>^"string"
F7
To find the next previous occurrence, press F3.
You may delimit strings with any of the following characters:
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 29
~
Tilde
!
Exclamation mark
#
Number sign
&
Ampersand
_
Underscore
|
Vertical line, Up-line
"
Quotation mark
'
Apostrophe, Single quote
\
Reverse slant, Backslash
You may use single quotes (') if you do not have Set Decimal On. Note that, with
this syntax, Qedit permits a few less characters in Visual mode than it does in Line
mode because Visual mode uses these characters for other purposes. For example,
the question mark is used to get quick help about Visual mode, instead of as a string
delimiter. If you insist on using other delimiters, you should use the Find command
on the ===> line.
===>F :string:
F7
Changing Strings
You can change strings on the screen by entering a Change command on the ===>
line.
===>c "niether"neither" */*+19
F7
Help on Visual Mode
To get help, press Home Up, type ? and press F7 or Enter.
===>?
F7
The ? command gives a one-screen summary of Visual mode. For complete on-line
help on Qedit, including Visual, type HELP in the ===> line and press F7 or Enter.
===>help
F7
For help on a specific command, type HELP [command name]. See the Help
command in the "Qedit Commands" chapter. To get out of help, press F8.
Compile, Link, and Run
You compile your file using the home line. Just type the proper compile command in
the ===> line and press F7 or Enter. For example, to compile a current COBOL
file:
===>cob85xl *
F7
In fact, you can execute any MPE or shell command in the ===> line. You can
:Link and :Run, :Listf, :Showjob, ls, and even execute UDC commands or shell
scripts, just as you do Qedit commands.
30 • Getting a Quick Start with HP Full-Screen Editing
Qedit 5.9 for HP e3000 User Manual
Formatting Paragraphs
To format a screen paragraph, mark the paragraph with ZZ cut-and-paste indicators,
then use a Justify command that includes a ZZ. For example:
===>justify both margin 68 zz
F7
If every paragraph ends with a blank line, you can Justify a paragraph by using the
relative line number on the screen. Justify will start at that point and continue until it
finds a blank line:
===>justify both margin 68 *+2
F7
For more information on Justify, see the Justify command in the "Qedit Commands"
chapter.
Undoing Changes in Visual Mode
After you have made some changes to your screen in Visual mode and updated the
file by pressing Enter, you may decide you don't want those changes after all. You
can use the Undo command to cancel these changes.
All of the changes you make on the screen before pressing Enter, are treated by
Qedit as one "undo-able" command, except for cut-and-paste operations. Qedit
always executes a cut-and-paste last after updating the file with any other changes,
no matter what order the changes were made in. This means that you can choose to
undo just the cut-and-paste operation, or undo it and all of the other changes. You
can continue undoing your previous changes until the file is back to its original state.
Refreshing the Screen
If you make changes to the screen, then decide not to keep them before you press
Enter to update your screen, how do you get your original text back? You refresh the
screen by typing a * on the home line, then pressing F7, F1 or Enter (or any function
key with Set Vis Update On). Use the Undo command if you press Enter and then
decide that you don't want to keep your changes.
If you insert so many new lines that you push the column template line right off the
bottom of your screen, don't worry -- it's not really gone. Qedit won't update your
screen without the template line, however. Press Next Page (Pg Dn) to pull up the
next screen of display memory. You have a problem only if you inserted so many
lines that you pushed the template line right out of display memory, and even then
you can still recover your changes. See the Errors in Visual section of Appendix E,
regarding qscreen.
Screen Refresh is particularly useful if you've pressed Clear Display by accident.
===>*
F7
When using Set Vis Update On to automatically update the screen, use *> F7 or *<
F7 to move ahead or back one page, without updating the current page.
Other Line Mode Commands
You may enter any Line mode Qedit command in the ===> line, including Opening
another file, MPE % commands for an external program such as MPEX, and
calculator commands (=). The ZZ cut-and-paste indicator can be used to mark a
group of lines for use in any Qedit Line mode command.
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with HP Full-Screen Editing • 31
===>list $lp $include zz
F7
Truncated Home Line
When editing a file with short records (e.g., Set Lang Text, Set Len 20), the right
margin of terminal display memory is set to match the record length. This means that
when typing home line commands you wrap the status line at the same width as the
records (very inconvenient if the record length is 3 bytes!). You can, however, cursor
past the right margin to type a longer command. Therefore, Qedit expands the right
margin when you use F7 to execute the home line command, making it possible to
execute a long command even when the data length is short. Qedit cannot expand the
right margin if you press Enter (and may cut short your command).
Exit from Visual
If your function keys do not work for some reason, you may not be able to use F8 to
exit from Visual. Instead, press Home Up, type / and press Enter. This updates your
current screen and returns you to Line mode.
===>/
F7
32 • Getting a Quick Start with HP Full-Screen Editing
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with Line
Mode Editing
Introduction
You don't have to learn every command in order to use Qedit. With just a few of the
basic functions, you can take care of editing job streams, programs, memos, or big
text files. First, find out how to run Qedit on your system. Your system manager may
have set up an easy way to access Qedit (try typing qedit). Look for a slash prompt
(/ on MPE or qux/ on HP-UX), which tells you Qedit is ready to go.
This introduction will make the following activities familiar to you: adding lines to a
file, looking at the contents of files, searching files for specific characters, changing
one line or many lines, deleting, moving, and copying lines, and saving files. In the
examples to follow, watch for comments on the right-hand side, enclosed in curly
braces. Whatever you see in { } is an explanation, not part of the command, although
Qedit will accept it. Press Return after each command line. When you finish your
session, getting back out of Qedit is easy. Type Exit, and press the Return key:
/exit
Adding Lines to a File
You add text with the Add command. Qedit numbers each line you add. Pressing
Return at any spot in the line moves you to a new line. This means that you can put a
blank line into your text if you press Return twice in a row. Qedit continues to add
your lines of text until you type // (two slashes) at the beginning of a new line and
press Return. Try typing Add right now, and Qedit moves the cursor and prints some
identifying information:
/add
QEDITSCR
Temporary File List * = 1
1 _
{remember to press Return}
{Qedit displays this line}
{and this line too}
{go on, Qedit is waiting for you}
Continue to "add" by typing in this example:
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with Line Mode Editing • 33
1
2
3
4
5
6
7
/
MEMO TO: Drama Staff, News Simulation Dept.
FROM:
Marie Reimer, Publicity Dept.
Please check your in-baskets daily and
respond to your fan mail within a week.
//
{stop adding for now}
{Qedit is waiting again}
You can add lines anywhere in the file by typing Add followed by the line number
where you want to start your insertion. For example, if you decide to date this memo,
type at the slash prompt:
/add 2
2.1 DATE:
2.2
2.3 //
/
November 18, 2000
You have added line 2.1 for the date, and line 2.2, which is blank. Line 2.3 is not put
into your file, since typing the double slash stopped the adding. Notice that Qedit
used line numbers that would fit between line 2 and line 3. Now, if you want to see
what the whole thing looks like, type List ALL at the slash prompt.
/list all
1
MEMO TO: Drama Staff, News Simulation Dept.
2
2.1 DATE: November 18, 2000
2.2
3
FROM:
Marie Reimer, Publicity Dept.
4
5
Please check your in-baskets daily and
6
respond to your fan mail within a week.
/
Looking at the File
The command for looking at the file is List. But you can do much more than List
ALL. For example, you can list a file you're not even working on. Our sample memo
is a temporary file, in your group, named Qeditscr, but you could look at a file in
another group now without harming the memo by typing, for example:
/list qedhint.help.robelle
The file qedhint.help may be scrolling by on your screen, but don't panic. If you
change your mind about looking at it, you can stop the listing by holding down the
Control key and pressing "Y".
You may choose to look at just a small part of the file. To prove that the memo,
although temporarily gone from your screen, is not lost forever, look at two lines of
it:
/list 3/4
3
FROM:
4
Marie Reimer, Publicity Dept.
Instead of listing all, you limited the range of lines to be listed. A range of lines,
called a rangelist, can have specific line numbers (such as 3 in the above example),
words like "first" and "last", relative line numbers such as -3 (means the third line
back) or +10 (tenth line ahead), or a combination.
34 • Getting a Quick Start with Line Mode Editing
Qedit 5.9 for HP e3000 User Manual
/list first/2,+1,last-2
1
MEMO TO: Drama Staff, News Simulation Dept.
2
2.2
4
The slash / separating the numbers (or words) symbolizes the word "to". Rangelists
can also contain strings. See the section on strings (called Searching the File), or the
"Glossary" for definitions of rangelist and string.
Browsing the File
If you want to browse through the file, the command you need is LJ. LJ stands for
List-Jump. Qedit shows you a screen of text, prints
More?[yes]
at the bottom of the screen, and waits for you. If you press Return, Qedit displays the
next screen. You can stop browsing by pressing Control-Y, typing NO or just N, or
by typing //. Also, you can type any command, and Qedit stops browsing to execute
it. To request a List-Jump:
/lj 6
/lj qedhint.help.robelle
{begin browsing at line 6}
{browse entire hints file}
Searching the File
So far, you typed line numbers to specify which lines you wanted to see. There is
another way to list lines, and that is to specify an identifying string. Put anything in
quotes and it's a string. Qedit lists all the lines that contain that exact same
"anything".
/list "your"
5
Please check your in-baskets daily and
6
respond to your fan mail within a week.
2 lines found
There are two occurrences of "your" in the file, one on line 5 and one on line 6.
Strings can help you find a particular place in the file quickly.
With the commands Find and Findup, you can go to the next consecutive location of
a string. Find searches the file from your current location to the end. Findup searches
backwards from where you are to the beginning. So in order to search a file for a
date scattered throughout it, type:
/find "January 18"
{search forward from current line}
Or, search back through the file with
/findup "January 18"
Qedit displays the next line containing "January 18". To search again for the same
string, just type Find (or Findup). You can abbreviate "Find" to "F" and "Findup" to
"^".
/f
To search for a different string, just type F "new string".
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with Line Mode Editing • 35
Editing Lines
Suppose you want to change the date of your memo. You could do it the slow way,
first deleting the line, then adding a replacement line with the new date. But instead
of all that retyping, try the Modify command. Modify has a lot of power. Here's how
to use it:
1.
Type M and the line number.
2.
Qedit displays the line, and you move along on the line below it by
pressing the space bar.
3.
Stop at the point where you want to make your correction.
4.
Type in the change to be inserted and press Return.
5.
Qedit displays the entire corrected line for your approval. Make another
correction if you want, and when satisfied, press Return again to accept
the corrected line and get back to the slash prompt.
An example:
/m2.1
2.1
2.1
DATE:
DATE:
November 18, 2000
9
November 19, 2000
{move with the space bar}
{press Return}
{press Return again}
Here is a partial list of special things you can do with Modify:
^B
insert text Before this column
^D
DELETE text from this column onward
^L
add text after the LAST column in the line
^O
OVERWRITE (or replace) columns
^T
TRAVEL over the line without changing it
^G
GOOFED. Put the line back the way it was, please
Note: The little symbol ^ is a shorthand way of saying that you hold down the
Control key (on some keyboards abbreviated Ctrl) while at the same time pressing
the letter. For example, ^B (or Control-B): keep the Control key down with one
finger while with another, type a B. These symbols won't show up on your screen.
This command is easy to use but awkward to describe; you'll understand how to use
it much faster if you give it a try. Let's take a typical example, and modify line 5 of
our memo. Begin by typing "m5" and, of course, pressing Return. Then, to replace
"daily" with "every day", our first step is to delete the word. Use the space bar to
move to the column under the "d" in "daily". Press ^D (you won't see anything,
remember), then space across all the columns you want to delete. Don't press
Return yet.
The second step is to insert the two new words. Press ^B and type "every day". Now
press Return to see the line with the revisions.
Qedit lets you see your revisions and continue modifying with as many different
changes as you can fit into one pass, before you press Return. In order to make
changes at different locations in a line, press ^T to space over the intervening
characters without disturbing them. If you goofed, press ^G instead: you'll get your
original line back.
36 • Getting a Quick Start with Line Mode Editing
Qedit 5.9 for HP e3000 User Manual
The final step is to accept the revisions by pressing Return one last time.
If your fingers are so trained to MPE's style of Modify (e.g., D for delete) that you
cannot remember to use the Control key, do not despair. As with most things in
Qedit, there is a configuration option to solve this problem. The command Set Mod
HP instructs Qedit to accept HP-style modifies (i.e., MPE modifies such as D and I),
instead of Qedit-style. See the Modify section of the Set command.
Global Changes
There is another way to modify lines in your workfile. The Change command allows
you to make changes throughout the entire file, without the bother of working on
each line one by one. For example, with one Change command to your memo, you
can replace all the colons with dashes.
/change ":"-" all
1
MEMO TO- Drama Staff, News Simulation Dept.
2.1 DATE- November 19, 2000
3
FROMMarie Reimer, Publicity Dept.
3 lines changed
Using the Change All command is a one-way street. If we now decide we don't like
the dashes and want to get the colons back, observe what happens to Line 5.
/change"-":" all
1
MEMO TO: Drama Staff, News Simulation Dept.
2.1 DATE: November 19, 2000
3
FROM:
Marie Reimer, Publicity Dept.
5
Please check your in:baskets daily and
4 lines changed
This second Change command has gotten us into hot water. Luckily, Qedit has an
Undo command that takes your file step-by-step backwards to put it back to the way
it was. See the Undo command in the "Qedit Commands" chapter.
CJ Command
If you're not sure what the consequences of a global change will be, use the CJ
command. CJ stands for Change-Jump. Qedit shows you each line it means to
change, and waits for you to approve, to change your mind, or to modify that line.
Then Qedit jumps to the next occurrence of your string, and repeats its question until
you have dealt with all occurrences of the string in the file. To accept the default
answer of NO (i.e., don't replace the string), shown in square brackets, just press
Return.
/cj":"-" all
1
MEMO TO: Drama Staff, News Simulation Dept.
Change okay (Y,N or Modify) [No]: {press Return}
2.1 DATE: November 19, 2000
Change okay (Y,N or Modify) [No]: {press Return}
3
FROM:
Marie Reimer, Publicity Dept.
Change okay (Y,N or Modify) [No]: {press Return}
5
Please check your in:baskets daily and
Change okay (Y,N or Modify) [No]:Yes
1 line changed
You can use the handy ^Y to stop in the midst of change-jumping just as you used it
to stop listing.
Rangelist
You can also specify individual lines or a rangelist to Change. For example,
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with Line Mode Editing • 37
/change "Dept."Department" 1/3
1
MEMO TO: Drama Staff, News Simulation Department
3
FROM:
Marie Reimer, Publicity Department
2 lines changed
/change "Drama Staff, "" 1
{changes string to nothing}
{i.e., deletes it}
1
MEMO TO: News Simulation Department
1 line changed
Copying Lines
Copying lines is a variation of the Add command. One reason we might want to copy
lines is to make a general-purpose form out of our memo. We can keep a sample
memo form at the beginning of the file, then copy it to the end of the file and fill it in
whenever we need to communicate. This is how to do it:
/add last = first/4
7
MEMO TO: News Simulation Department
8
9
DATE: November 18, 2000
10
11
FROM:
Marie Reimer, Publicity Department
12
6 lines COPIED
Qedit copies the rangelist (first/4 = first line to line 4) after the indicated line (here,
last line in file). To accomplish our goal of placing the sample memo template at the
beginning of the file, we'll have to move the first six lines so they follow our new
sample. Before we try moving lines, a last tip on copying: you can copy lines from an
external file by including the file name in the command, placed after the equals sign
and right before the rangelist.
Moving Lines
Moving is very similar to copying; it's another form of the Add command. But,
instead of using the equals sign, use the less-than sign. You can specify:
/add 12 < 1/6
13
MEMO TO: News Simulation Department
14
15
DATE: November 18, 2000
16
17
FROM:
Marie Reimer, Publicity Department
18
19
Please check your in-baskets daily and
20
respond to your fan mail within a week.
8 lines MOVED
Qedit moves the rangelist (in this case, lines 1 to 6) after the indicated line (in this
case, 12). In case you were wondering, we could have used "last" instead of the
number "12". You can add, move, or copy lines to any spot. In fact, we could have
copied the first six lines to the beginning of the file in the first place, but then we
wouldn't have had this fascinating "move" example. The result of this particular
move is
38 • Getting a Quick Start with Line Mode Editing
Qedit 5.9 for HP e3000 User Manual
/list all
7
MEMO TO: News Simulation Department
8
9
DATE: November 18, 2000
10
11
FROM:
Marie Reimer, Publicity Department
12
13
MEMO TO: News Simulation Department
14
15
DATE: November 18, 2000
16
17
FROM:
Marie Reimer, Publicity Department
18
19
Please check your in-baskets daily and
20
respond to your fan mail within a week.
Deleting Lines
To demonstrate the Delete command, we'll get rid of our memo template. On some
systems, Qedit asks for confirmation before deleting a large number of lines. If so,
you can cancel the deletion just by pressing Return; to confirm the deletion, type
"yes" and press Return. The abbreviation for Delete is simply D :
/d first/12
7
_MEMO TO: News Simulation Department
8
_
9
_DATE: November 18, 2000
10
_
11
_FROM:
Marie Reimer, Publicity Department
12
_
DELETE 6 lines [no]? yes
If you typed "yes" without due consideration, you now have a chance to take it back.
Press Control-Y, and Qedit saves your bacon with the message "Undeleted!" But you
must press Control-Y immediately: if you do anything else between the deletion and
the rescue, Qedit will commit to the deletion. However, in this situation the Undo
command can bring your lines back, even if you have made more changes. You must
undo each change to the file in reverse order. See the "Qedit Commands" chapter of
the manual for details.
Help Command
On-line help is available on every topic in Qedit. After you've become an expert with
the commands introduced here, you can use Help to teach yourself all sorts of
amazing new commands. To get Help, type a question mark or the word HELP.
/help
or
/?
Qedit responds with a list of its commands, and at the bottom of the screen, a list of
keywords. Type the keyword of the topic in which you're interested. For example,
one of the keywords is "Full-Screen". Get an introduction to full-screen mode by
typing:
>full-screen
Did you notice that the Help prompt is different from Qedit's regular prompt?
Qedit 5.9 for HP e3000 User Manual
Getting a Quick Start with Line Mode Editing • 39
When you asked for Help, Qedit filled your screen with lists. To learn about some of
the commands in the list, (e.g., the Add command), type the keyword:
>commands
and Qedit gives you some general information on the topic of commands. At the
bottom of the screen is a list of keywords. Type the one in which you're interested:
>add
Qedit responds with further information. You can backtrack your route and look at
all the other possibilities too. Pressing Return takes you back one step at a time.
To exit from Help, press the Return key until you see the regular Qedit slash prompt
again.
Saving the File
There are two commands that preserve your work: Keep and Shut. First, invent a
name for your file. Naturally, two files cannot have the same name. The name must
be a valid MPE file name. We've been working on a temporary file. To save it, name
it:
/keep myfile1
When you want to work on Myfile1 again, type:
/text myfile1
and Qedit will copy Myfile1 for you to use. If you make changes to the file,
remember to Keep it again before you leave Qedit to make the changes a permanent
part of the file.
Open and Shut for Instant Access
Only Qedit files can be opened and shut. It is much faster to use the Open command
than it is to use the Text command, because you make changes directly to the Open
file. With a Text file, you must wait for Qedit to make a copy to which you make
your changes.
Using the Shut command converts your file to a Qedit workfile. You can Shut a new
file, or a file that you made a copy of (with the Text command). Name the file as
described above.
/text myfile1
QEDITSCR
{copy of Myfile1}
16 lines in file
/shut myfile1
MYFILE1,OLD Qedit File, # of lines=16
Purge existing file [no]? Yes
File renamed from QEDITSCR to MYFILE1
40 • Getting a Quick Start with Line Mode Editing
Qedit 5.9 for HP e3000 User Manual
Running Qedit under MPE
Introduction
To run Qedit on MPE, type this command:
:run qedit.pub.robelle
Qedit. Copyright Robelle Solutions Technology Inc. 1977-2001.
(Version 5.0) Type ? for help.
Today's Hint. For full-screen edit, use Visual.
/
Qedit prints its version number and the hint of the day and prompts with "/". You
type commands, ending each with Return. For example, to edit a file enter a Text
command:
/text filename
To save your edits, use the Keep command.
Edit in Line Mode or in Full-Screen Mode
Initially you are in Line mode (you type command and text lines, ending each with
Return). You can backspace over errors with Control-H (holding down Control while
you press "H"), or use the Backspace key. Control-X cancels a line. The function
keys give you eight quick functions: F1 = Visual, F2 = Roll up, F3 = Findup, F4 =
Find, F5 = Browse backward one page, F6 = Browse forward, F7 = Listredo, and F8
= Exit.
Use the /VIsual command or the F1 key to switch to full-screen mode, where you
edit a full screen of text using the terminal keys. The Enter key passes the revised
screen back to Qedit, and the F7 key executes any Line command that you type on
the home line.
To return from full-screen mode to Line mode, press the F8 key. To save changes to
your Text file, use the Keep command. To get out of Qedit, type Exit or press F8
again.
/keep
/exit
End of program
If you forget to Keep your changes, Qedit warns that your changes weren't saved,
you can rerun Qedit, reopen the temporary workfile (Open with no parameters), and
save your changes.
Qedit 5.9 for HP e3000 User Manual
Running Qedit under MPE • 41
Edit Several Files at Once
The temporary file called "Qeditscr" is Qedit's primary scratch file. Whenever you
use the default options for Opening or Texting a file, your work will be in the
Qeditscr scratch file.
How to Edit Several Files?
What if you want to edit two or more files, and copy lines between them? You could
Text the first file, Hold the selected lines, Keep your changes, then Text the second
file and insert the lines. However, if you are doing a large number of edits, the
constant Text and Keep operations are inconvenient.
A faster method is to Text each file into an extra scratch file of its own. Then use the
"Open ?" or the "Open *-n" command to switch quickly between them. By default,
Text always copies the file into the Qeditscr scratch file. However, Qedit can supply
up to eight extra scratch files. To Text a file called abcd into an extra scratch file,
type:
/text abcd,new
When you Exit, Qedit checks whether you have any unsaved edits in any of your
extra scratch files. If there are some unsaved edits, Qedit prompts you to "Discard?"
them or to stay in Qedit to save them with the Keep command.
Starting a New Scratch File
Sometimes you start editing a new document and have nothing to Text to create the
extra scratch file. In this case, use the New command without parameters.
/new
A new extra scratch file is created and assigned a sequential number (1,2,3...). If you
use the Open ? command, you would see "Extra Scratch file #2" in the list of files. If
you do a Keep or Set Keep Name, you would then see the Keep file as the Text name
in Open ?.
Qeditmgr Configuration Files
When you run Qedit, it automatically "uses" two configuration files if they exist:
Qeditmgr.Pub.Sys and Qeditmgr in the same group and account as the program file
(usually Pub.Robelle). The system manager creates either or both of these files and
puts Qedit commands in them to set Qedit options, print messages, and execute
standard :File commands. To check the options for your site, List these files.
If you want a Qeditmgr file for your logon account or your logon group, run Qedit
with Parm=1 or Parm=2. Parm=1 executes Qeditmgr.Pub.logon, while Parm=2
executes Qeditmgr.logon.logon. To execute both, run with Parm=3 (3 is 2 plus 1;
you can combine PARM options). These files are in addition to the global Qeditmgr
files, which are always executed first.
:run qedit.pub.robelle;parm=1
{uses Qeditmgr.Pub}
When you run Qedit, it attempts to execute commands in global configuration files:
Qeditmgr.Pub.Sys and/or Qeditmgr.Pub.Robelle. The Qeditmgr file, which can be a
Qedit workfile or a Keep file, may limit Qedit users or do default Set commands. If
you move Qedit out of the Robelle account, Qedit looks for the Qeditmgr file in its
new location.
42 • Running Qedit under MPE
Qedit 5.9 for HP e3000 User Manual
Limiting Compile Priority
If you want to restrict compiles to the DS or ES subqueue, put a COMPPRI
command in your Qeditmgr file. The syntax is a little nonstandard, in that it acts like
a Set command, but does not use the word Set.
COMPPRI=DS
{or COMPPRI=ES}
COMPPRI specifies the highest priority at which you can Compile within Qedit.
Any Qedit compile commands automatically "create" the compiler in the lower
priority. Qedit itself, and the user, remain in the original higher priority. In no case
will the compile occur at a higher priority than that of Qedit. COMPPRI may only be
executed via Qeditmgr; it cannot be entered from the keyboard.
Default Set Commands
Qedit treats the Qeditmgr file exactly like a usefile, so Qeditmgr can include any
Qedit commands. The Set commands let you configure Qedit so it has the ideal
defaults for your shop (e.g., Set Lang Cobol ...). Here is a typical Qeditmgr file:
{These are default qedit values for all users:}
comppri=ds
{force compiles into ds}
set lang cobolx all on
set whichcomp cobol 85
{CM compiles}
set whichcomp fortran 77 {CM compiles}
set x date list off
{mark changed lines with date}
set check on
{verify delete/format of >5 lines}
set list page on
{LP listings interpret $page}
set udc udc.catalog.robelle
z=list */last
{define Z command}
For details on Set commands, refer to the "Qedit Commands" chapter.
If one set of defaults is not appropriate for everyone on your system, it is possible to
set up account and/or group Qeditmgr files. See the chapter "Running MPE under
Qedit" for details. For security reasons, users cannot override the global Qeditmgr
files with :File commands. This prevents them from getting around the limits
imposed by the system manager.
Using Qedit in Batch
Qedit in batch is almost identical to Qedit in a session, except for answering
questions. When Qedit asks a question in batch, no one is there to answer it.
Therefore, Qedit does not expect an answer from $stdinx. Qedit assumes that you
want your batch task to complete, so it always selects the option that will complete
the command successfully. This is normally a "YES" answer, as in "yes, clear the
file" or "yes, upshift the line". Qedit prints the question on $stdlist, and the answer
that it has selected for you.
If you run Qedit from a batch job, but redirect $stdinx and $stdlist to the same
terminal, Qedit acts as if it were in Session.
If you run Qedit in a REMOTE SESSION that was created from a batch job on the
other machine, Qedit is unable to detect that it is really controlled by a job. So, Qedit
operates in Session mode and waits for answers to all questions. You can use Set
Interactive Off as your first command to override this.
When Qedit encounters an error in batch, it has no one there to correct it. Therefore,
Qedit normally aborts. However, you can use Set Autocont On to override this abort,
Qedit 5.9 for HP e3000 User Manual
Running Qedit under MPE • 43
instructing Qedit to keep processing after errors in batch (i.e., automatically insert a
:Continue before each command).
Summary of Parm= Values
1
Execute QEDITMGR.PUB.logon
2
Execute QEDITMGR.logongroup.logonacct
4
Execute INFO string once
8
Execute INFO string on each reactivation
16
Unused
32
Don't suspend on exit, terminate
64
Check with user before Exiting
128
Execute Info= string only
256
Suspend on info=file name and single file edit
512
Single file edit only (info= contains name)
Values may be combined by adding them together. For example, Parm=67 means
"execute Qeditmgr files in the Pub group of my logon account and in my logon
group (in addition to to the global qeditmgr files) and don't let me Exit without first
double-checking".
If you run Qedit from within another tool that does not support Parm= on the :Run
command, you can either use Info="-p n" or put the Parm value into the
QEDPARMBITS JCW:
:run qedit.pub.robelle;info="-p 64"
:setjcw qedparmbits=64
:run qedit.pub.robelle
From the Posix Shell
The Posix shell does not have the concept of a Parm value. Previous versions of
Qedit still try to retrieve the value and are ending up with unpredictable values
causing unpredictable behavior. To get around this problem, Qedit tries to determine
where it is running from. If it is run from the standard Posix shell, SH.HPBIN.SYS,
Qedit assumes the parm value is entered via the -P argument. For example, to run
Qedit with a value of 67 from the Posix shell prompt, one would enter:
/ROBELLE/PUB/QEDIT -p 67
All arguments are retrieved as if they had been entered in the MPE Info= string. So,
any feature supported by the Info= mechanism also works from the Posix shell.
Exit and Entry Options
Following are explanations and examples of running Qedit with the different
parameter and Info strings.
44 • Running Qedit under MPE
Qedit 5.9 for HP e3000 User Manual
Exit with Verify
Some users find that they Exit from Qedit inadvertently by pressing F8 too many
times. This can be irritating if you have many suspended son processes, which are
lost on Exit. To require user approval on Exit, run Qedit with Parm=64.
:run qedit.pub.robelle;parm=64
/e
Okay to exit [no]:
/
Info= First File to Edit
Info= can be used to pass Qedit the name of the first file to edit, unless you use Parm
4, 8 or 128 to define Info= as a command string.
:run qedit.pub.robelle;info="myfile"
/visual
If the file named is an existing file, Qedit either Texts a copy of it, or Opens it if the
file code is 111. If the file does not exist, Qedit configures the Set Keep Name to
create that file when you do a default Keep command (e.g., K with no parameters).
To create a new Qedit workfile, use a :File command with Code=111:
:file newwork;code=111
:run qedit.pub.robelle;info="newwork"
Even though you passed in the first file name to Qedit, you can edit other files too.
Random Name for Primary Scratch File
If you use the Info= file name option or Set Work Random On, Qedit generates a
random name for the Qedit scratch file, instead of using Qeditscr. This allows you to
have multiple copies of Qedit in the same session without worrying about conflicts
over use of Qeditscr. The scratch file is permanent and the name is QEDnnnnn in
your current logon group. Even though random scratch files are created in MPE's
permanent domain, they are temporary in the sense that Qedit purges them when you
exit. For this reason, you must have Set Work Temp ON to be able to use random
scratch files.
"Discard Changes?" on Exit
When you are using random, permanent scratch files, Qedit needs to purge them
when it terminates. But you may not have saved your editing work yet. In that case,
Qedit asks you "Discard changes?" and will not Exit/Purge unless you answer Yes:
:qedit.pub.robelle myfile
/visual
/exit
Discard your changes [no]:
/
Qedit can supply Extra Scratch Files as well as the Primary Scratch file. These too
are checked on Exit to see if you left any edits unsaved.
Info= "-p 99" Specifies Parm Value
The Info value can specify the Parm bits as well as the first file name. You precede
the file name by -p and a numeric value (e.g., -p 64 or -p %100 or -p $40). For
Qedit 5.9 for HP e3000 User Manual
Running Qedit under MPE • 45
example, to edit "myfile" and confirm "Ok to exit" on the Exit command, you could
do the following:
:run qedit.pub.robelle;info="-p 64 myfile"
/visual
/exit
Okay to exit [no]:
Info= "-c cmdstring"
In addition to passing the Parm value and the edit file name, Info can specify
commands to be executed, with the -c option. The -c is followed by the commands to
be executed. If those commands contain a space, they must be enclosed in one of the
Qedit quote characters; otherwise, the quotes are optional. Note that the -c must be
lowercase, as in UNIX.
The Parm value, if any, is specified before the -c option, and the file name to edit, if
specified, must be placed after the -c option. When both -c and a file name occur, the
-c commands are executed after the file is accessed for editing. Here are some
examples:
qedit
qedit
qedit
qedit
qedit
"-c
"-c
'-c
"-c
"-p
visual myfile"
:visual: myfile"
"set vis ab 3 bel 12;visual" myfile'
'text abc;use fixit;k,y;e'"
64 -c visual myfile"
The underscore character can be used as a string delimiter and as as valid character
in a Posix filename. If you enter a filename containing an underscore in the INFO=
string parameter, Qedit interprets the underscore as a string delimiter. This is a
known problem and we are working on a permanent fix for it. For example, if you
enter:
run qedit.pub.robelle;info='-c "t my_history;vi"'
This command should start up Qedit, have it open the Posix file called
my_history and go into full-screen mode automatically. However, since the
underscore is seen as a string delimiter, whatever follows is basically ignored during
command processing. Thus, the file is opened but Qedit stays at the line-mode
prompt.
We hope to have a permanent fix in a future release. In the meantime, the
workaround is to explicitly identify the underscore as being part of the filename. You
can do this in different ways. Here are two examples.
run qedit.pub.robelle;info='-c t $file \my_history\;vi"'
The $file keyword and the backslash characters are used to clearly identify the
filename. The other approach is remove the underscore from the list of valid
delimiters using the Set StringDelimiters command.
run qedit.pub.robelle;info='set stringd posix;-c "t my_history;vi"'
The $file approach is simpler as it only affects that particular command. The Set
StringDelimiters approach should be used with caution as it might affect other
commands during the edit session.
Parm 512 to Edit a Single File
Sometimes you want to invoke Qedit for a specific purpose, such as to edit order
notes in a purchase order system. You are using Qedit as a dedicated tool for a
specific purpose. In these cases, specify Parm 512 and pass in the file name through
46 • Running Qedit under MPE
Qedit 5.9 for HP e3000 User Manual
Info=. You are able to edit only that file, and it will be saved on exit. You will not be
allowed to edit any other file.
:run qedit.pub.robelle;info="-p 512 -c visual myfile"
/exit
Save your changes (yes/no)?
Parm 512 is the same as the Basicentry entry point, except that the file name is
specified through Info= rather than through :File Edttext. The functioning is the
same, but the primary scratch file will be random instead of Qeditscr. Many tools do
not allow you to specify an entry point when running a program, so Parm 512 gives
you an alternative.
Info= An Empty File to Fill
You can easily start with an empty file, add text to it, and Keep it on Exit. Create the
file before entering Qedit and use the single file Parm value:
:build abc.source;rec=-76,10,f,ascii
:run qedit.pub.robelle;info="-p 512 abc.source"
Info= Temporary File
You can edit an existing Temporary file, whether empty or not, and Keep it back into
the same file name on Exit. Warning: Never use the ;Temp option on :File
commands, only on the :Build command. And don't use ,Oldtemp either. Oldtemp
has no effect on the creation of files. Using ;Temp on the :File command overrides
the Close disposition of the file and causes Qedit to create unwanted, empty
temporary files.
:build message;rec=-80,16,f,ascii;temp
:run qedit.pub.robelle;info="message"
Info= Can Create New Files
Info= file creates a new Keep file on Exit if one did not exist. To create a new Qedit
workfile, use a :File command with Code=111. For example, these commands work
whether newfile exists yet or not:
:run qedit.pub.robelle;info="newfile"
/add last=template
/visual
/exit
:file newfile;code=111
:run qedit.pub.robelle;info="newfile"
/add last=template
/visual
/exit
This method cannot be used to create a new temporary file. Build the temporary file
before invoking Qedit instead.
Parm Values to Suspend or Not
When you exit Qedit, it either terminates or suspends, depending upon how you
invoked it and what Parm values you specified.
What are the pluses and minuses of suspending? Unfortunately, many tools allow
you to run Qedit, but do not notice if Qedit suspends when done rather than
Qedit 5.9 for HP e3000 User Manual
Running Qedit under MPE • 47
terminating. HPDesk has this problem, as well as any program that calls the
Hpcicommand intrinsic to execute Run commands (e.g., native-mode PowerHouse).
The next time you run Qedit from within the tool, you get a new copy of Qedit.
Eventually you will have many suspended copies of Qedit, all consuming system
resources. However, if you have a tool, such as Select or MPEX, that can reactivate
suspended processes, activating an existing process is much more efficient on MPE
than creating a new one.
If you run Qedit without any special options, it suspends on Exit by default; you can
suppress this with Parm 32. You can also suppress suspend with Set Suspend Off. If
you specified an Info= string (or use the Basicentry entry point), Qedit does not
suspend on Exit; it terminates. To force Qedit to suspend, use Parm 256. When Qedit
is reactivated, it repeats the steps that it does upon initial entry, except for execution
of the configuration files.
:run qedit;info="-p 256 myfile" {suspend}
:run qedit;parm=32
{do not suspend}
Info= Commands Only
If you :Run Qedit with Parm 4, the entire Info= parameter is treated as a string of
Qedit commands to be executed (up to 256 characters).
:run qedit.pub.robelle;parm=4;info="use jobfile;exit"
If you use Parm 4 and Info= when you run Qedit from a menu program, Qedit
executes the Info= commands only once. If you want Qedit to re-execute those
commands every time it is activated, use Parm 8.
If you want Qedit to execute only the Info= commands and not to prompt the user
for input, use Parm 128. This is handy when you want to invoke Qedit to perform a
specific task without user intervention:
:run qedit.pub.robelle;parm=128;info="reflect dir"
Also, if you want Qedit to suspend and repeat the Info= string (only) each time you
activate it, combine Parm 8 and Parm 128 (makes Parm 136).
Remember, if you don't specify Parm 4, 8 or 128, Info= will be interpreted as a
file to edit unless you precede the commands with the -c option.
Basicentry Option
Basicentry is on older option that provides the same capabilities as Info=file name.
When you run Qedit with the Basicentry entry point, Qedit edits the file "Edttext"
that you have defined via a :File command. Basicentry can be combined with Parm 4
and Info="command". For example,
:file edttext=abc.source
:run qedit.pub.robelle,basicentry; &
parm=4;info="visual;exit"
If you are using Qedit from within another program, it is more efficient to have Qedit
suspend on Exit so that you don't have to create a new process for each editing task.
You can do this by combining Basicentry with Parm 256, which means suspend on
Exit, or Basicentry and Parm 8, which means repeat the Info= string each time Qedit
is activated.
Basicentry uses the same logic as Info=file name, vis-a-vis empty files, new files,
Opening workfiles, temporary files, etc. Remember, never use ;TEMP or
48 • Running Qedit under MPE
Qedit 5.9 for HP e3000 User Manual
=OLDTEMP on you :File commands. You can use Basicentry to create a new
temporary file:
:file edttext=message
:run qedit.pub.robelle,basicentry;parm=4; &
info="set keep name *edttext,temp"
JCWs That Drive Qedit
Qedit has a number of JCWs (Job Control Words, a feature of MPE) that allow you
to configure and direct the execution of Qedit. Most of these have to do with the type
of terminal you are using, but QEDITMGRTRACE allows you to see your
configuration commands and QEDPARMBITS allows you to specify the Parm=
values without a Parm= option on the Run command.
When you run Qedit, it must identify the type of terminal that you are using and
determine what function-key labels to display. Qedit does status requests to detect
the model number and the current width of display memory. This information is used
to enhance the functioning of Qzmodify, Visual, Help and List. Qedit locks the
keyboard during terminal identification and discards any user input that manages to
get through. However, if you have Reflection typeahead enabled, this is not possible;
be careful not to type during terminal identification in this case.
Qedit sets three JCWs to remember your terminal state: RCRTMODEL,
RPCVERSION and RCRTWIDTH. If you run Qedit and these JCWs are already set,
Qedit does not need to do the status requests of your terminal. To reset these JCWs
and force Qedit to re-identify the terminal, use the Set Visual Stop command. You
can set a fourth JCW, RCRTSTRAPSGH, to request nondefault handshaking in Line
mode. The fifth JCW, RLABELDEFAULT, is described under "Function Key
Labels".
RCRTMODEL JCW
This JCW can have any of these values:
0
Don't know terminal model yet, will check it
1
This is not an HP terminal, won't bother checking it
1234
This terminal or emulator is not fully-compatible with an HP terminal
2645
This is an old HP terminal without function key labels
2392,etc.
This is a newer HP terminal with labels
2393/2397
This terminal can have up to 160 columns of display
7009
A 700/9x terminal with 132-column ability
If you are using a 2645, you can save one status-request timeout by doing setjcw
rcrtmodel = 2645 before you :Run Qedit. If you are not using an HPcompatible terminal, you can avoid all timeouts by doing setjcw rcrtmodel =
1 before entering Qedit.
Type 1234 Terminal or Emulator
Set the RCRTMODEL to 1234 if the terminal or emulator you are using does not
support all the standard HP terminal features. For example, you should use this
setting with hpterm. hpterm is a UNIX terminal emulator running under the X
Qedit 5.9 for HP e3000 User Manual
Running Qedit under MPE • 49
window system. It's a basic 2392 emulator. hpterm can not identify itself to Qedit,
nor let Qedit change the display width by escape sequence (although you can
configure the display width manually).
When RCRTMODEL is set to 1234 before you run Qedit, Qedit functions in the
following manner:
1.
It accepts the terminal as a terminal that is capable of more than 80
columns of display memory and of doing full-screen mode.
2.
If you set RCRTWIDTH to some value between 81 and 256, Qedit
accepts it as the manually set display width.
3.
If you do not set RCRTWIDTH, Qedit attempts to sense the current
display width and sets the jcw accordingly. The maximum width is 256
columns. Qedit can support up to 999 columns but, in these instances,
the width has to be entered using the RCRTWIDTH variable or the Set
Term Columns command.
4.
Qedit sets the option that eliminates changes to display width: Set
MarginFixed On.
This option also ensures that the right margin is always set at the right
edge of the display width. Normally the right margin is set at the last
valid column of the file, which might be less than the display width.
You can use this option with other emulators if you wish to stop Qedit
from changing the display width.
Please read the section on Set Visual Marginfixed to learn about its
advantages and disadvantages.
5.
If you use the Set Term Columns command to specify a new width,
Qedit does not attempt to change the terminal with an escape sequence.
Instead, it displays the following message and waits for you to change
the width manually:
Please change display width and press Enter:
Qedit does not verify that you have done this correctly, so if you make
a mistake, do another Set Term Columns command to fix the width.
6.
Set Visual Stop normally resets all the jcws to their default state,
forcing Qedit to re-identify the terminal. However, for hpterm, the
RCRTMODEL and RCRTWIDTH jcws are not reset, since the
terminal cannot be identified automatically. If you wish to stop using
1234 mode, you must reset RCRTMODEL to 0 manually.
7.
Set Visual Widen should normally be set to 76 or 80 (default) with
hpterm. Otherwise you will not be able to use the extra columns beyond
80.
RPCVERSION JCW
RPCVERSION can have any of these values:
0
don't know if this is Reflection, will check it
1
this is not Reflection, or it is too old
wXyyy, where
50 • Running Qedit under MPE
w=0
for display width can be expanded
1
for display width cannot be expanded
Qedit 5.9 for HP e3000 User Manual
2
for 132-column VGA in Reflection
X=0
for DOS Reflection
1
for Macintosh Reflection
2
for Windows Reflection
5
for Qcterm emulator
yyy=version number
(420 = 4.20)
You cannot do the :Reflect command if Xyyy equals 150 or 200. This same value is
shown in Verify Visual as {Reflect=420}; if it says "Col=80 max", this PC emulator
was unable to make display memory wider.
RCRTWIDTH JCW
This JCW is usually 80 for 80 columns of display memory. But if your terminal or
PC is configured with more than 80 columns, Qedit sets this JCW to that width.
Qedit must determine the width of display memory in order to properly fold listings
of lines that will overflow that width.
To change your Line mode display width while in Qedit, use Set Term Columns.
RCRTSTRAPSGH for Handshaking
The G and H straps of the HP terminal control datacomm handshaking. If you pull
up your Terminal Config screen, it should look something like this:
InhHndShk(G) NO
Inh DC2(H) NO
Since these are "inhibit" straps, NO actually means "yes, do the handshake". G and H
control whether the terminal waits for a DC1 and/or DC2 prompt character from the
computer before sending input, such as on terminal status requests or upon pressing
Enter in block-mode. If the straps are configured incorrectly, the symptom is a hung
terminal (i.e., the terminal is waiting for a prompt character that is never going to
come, or the terminal has sent the data before the computer was ready because it
didn't wait for the prompt).
By default, Qedit sets these straps the way it appears will work best, based on your
CPU and Term Type. The settings differ between Line mode and Visual mode.
Line Mode. Qedit starts execution in Line mode and immediately attempts a status
check of your terminal. With a DTC or ATP, this usually requires a handshake, so
Qedit should set G and H to NO. If you are using an X.25 network or a LAN, the
network provides buffering of data sent by the terminal, so Qedit usually inhibits
handshaking. These Line mode rules apply to both MPE V and MPE/iX.
Line Mode:
Serial
G=NO, H=NO
X.25/LAN
G=YES, H=YES
Block-Mode. The situation in Visual mode is more complicated. You are in blockmode and when you press Enter, your terminal wants to send a screen of memory. To
summarize the recommended G and H values:
Block-Mode:
Qedit 5.9 for HP e3000 User Manual
Serial
X.25/LAN
Running Qedit under MPE • 51
MPE V
G=YES, H=NO
G=YES, H=YES
MPE/iX
G=YES, H=YES
G=YES, H=YES
MPE V has a complex system to stop your terminal from sending the data until the
ATP is ready and there are enough memory buffers available in the CPU. The
terminal sends a DC2 when you press Enter and MPE replies with an Escape code to
Home Up and a DC1 to trigger the transfer. This arrangement only works if G=YES
and H=NO.
MPE/iX improves the speed of block transfers by eliminating the Home Up and the
DC1 trigger. Instead of sending a Home Up Escape code, MPE/iX enables a terminal
option to do an automatic Home Up when you press Enter. That is why block-mode
does not work on some older terminals. Instead of the DC1, the DTC provides a
typeahead buffer for the entire screen contents when you press Enter in block-mode.
Qedit sets G=YES, H=YES to inhibit handshaking on a DTC while in block-mode.
However, the DTC does not have unlimited buffer space, so it uses XON/XOFF
pacing to control the flow from the terminal. You must enable your terminal's
XON/XOFF Transmit Pacing, which is not enabled by default.
Using block-mode over an X.25 network or LAN can be tricky. Theoretically, the
network provides full buffering and no handshaking is needed, so set G=YES and
H=YES on both MPE V and MPE/iX. However, the buffers may not be large enough
for the transfer that Qedit makes in Visual. MPE/iX must work with the network to
ensure that the terminal is configured to do an automatic Home Up on Enter,
otherwise the terminal starts transferring from the position of the cursor at the time
you press Enter.
Overriding Qedit. If you are using an unusual X.25 network to connect your
terminal to the HP e3000, you may find that Qedit sets G and H incorrectly. Perhaps
the network simulates a direct connection so well that Qedit cannot figure out that
you are using X.25.
For these situations, Qedit has a JCW that allows you to specify exactly how you
want G and H set in Line mode.
:setjcw rcrtstrapsgh = n
n
G
H
0
no
no
1
no
yes
2
yes
no
3
yes
yes
(handshaking active)
(no handshaking, X.25)
Qedit only reads and never changes the value in this JCW.
To override the setting of G and H in Visual mode, use the Set Vis DTC option,
setting it ON or OFF. You may have to experiment to find the right setting.
G & H Summary. In block-mode, Qedit decides how to set G and H. You can
override that decision by doing Set Vis Classic On or Set Vis DTC On. When Qedit
returns to Line mode, it needs to reset the G and H straps to some value. Again,
Qedit makes a choice of its own, but it may not work on all networks. Therefore, the
JCW allows you to override the reset values for G and H when exiting from fullscreen mode to Line mode.
52 • Running Qedit under MPE
Qedit 5.9 for HP e3000 User Manual
Trivia. These settings are called "straps" because in the earliest HP terminals,
configuration settings were enabled or disabled by inserting a short piece of wire (no
bigger than a staple) between two holes in the circuit board. Configuring by way of
these short metal "straps" became known as "strapping your terminal". Today, of
course, all configuration is done in terminal software by way of on-screen menus.
RLABELDEFAULT JCW
If you set the RLABELDEFAULT JCW before starting Qedit, you can specify what
function-key labels appear upon entry into Qedit.
:setjcw
:setjcw
:setjcw
:setjcw
:setjcw
:setjcw
:setjcw
rlabeldefault=0
rlabeldefault=1
rlabeldefault=2
rlabeldefault=3
rlabeldefault=4
rlabeldefault=5
rlabeldefault=6
{don't care}
{terminal lacks labels}
{show user keys}
{show modes keys}
{no keys -- blank}
{F1 to F8 labels}
{Qedit's labels}
If you wish to use Qedit's function keys in Line mode, set the RLABELDEFAULT
JCW to 6 before running Qedit. To change the function key defaults while in Qedit,
set the JCW and then use Set Vis Stop to force Qedit to re-initialize.
The memory lock function is useful because it keeps certain lines on the screen while
scrolling the text. This function is controlled by the F6 key on the modes keys. When
you start Qedit with something other than modes keys, switching between enabling
and disabling memory lock can be annoying. Qedit provides a command to easily
toggle memory lock.
If you want to enable memory lock, move the cursor to the last line you want to
freeze and enter a dollar sign ($). When you are done, enter a dollar sign and a
hyphen ($-) to disable memory lock.
QEDITMGRTRACE JCW
If the QEDITMGRTRACE JCW is set to a nonzero value, Qedit prints tracing
messages for the Qeditmgr configuration files.
:setjcw qeditmgrtrace=1
The trace includes the name of each Qeditmgr file that Qedit attempts to open, the
:File command that redefined the file (if used), and each command executed from the
file.
QEDPARMBITS JCW
Qedit has options which are specified via the Parm= value of the MPE :Run
command, such as Parm=64 to ask permission on Exit. If you don't have access to
the Parm= option, you can put those values into the QEDPARMBITS JCW instead:
:setjcw qedparmbits=64
:run qedit.pub.robelle
The QEDPARMBITS JCW is only effective if the Parm= value received by Qedit is
0 (i.e., no Parm= option on :Run or Create).
Qedit 5.9 for HP e3000 User Manual
Running Qedit under MPE • 53
QEDCURWFILE Variable
Qedit updates a variable, QEDCURWFILE, with the name of your current or last
workfile. This gives you the ability to reference the current workfile easily from
within a command file without having to pass it in as a parameter.
QEDSTOREDPWD and QEDPROMPTEDPWD
Variables
When the Qedit for Windows client establishes a new connection, it transmits
information about the passwords included in the request. Qedit updates two variables
with the information: QEDSTOREDPWD and QEDPROMPTEDPWD. The first variable
indicates which passwords are stored with the connection. The second variable
indicates which passwords are prompted for.
Values for these variables can have up to 4 characters. Each character represents a
password supported by MPE. The user password is identified by the letter U, the
account password by the letter A and the group password by a G. If you're using
VESOFT's Security/3000 and enabled session passwords, the variables might also
contain the letter S.
Both variables are always created. If a variable does not have any of the passwords,
it's value is set to asterisk *. For example, if the session and user passwords are
stored with a connection, the variables will have the following values:
QEDSTOREPWD = SU
QEDPROMPTEDPWD = *
This gives you the ability to reference these variables from within a command file, a
Use file or a Qeditmgr file.
Since these variables are accessible from the Qeditmgr files, they can be used to
validate proper security procedures and settings. Combined with the Exit
command, they can be used to implement tighter system access control. For example,
a qeditmgr file might contain the following statements:
/if pos('S', qedstoredpwd) = 0
/
exit Session passwords must be prompted for. Contact system admin.
/endif
54 • Running Qedit under MPE
Qedit 5.9 for HP e3000 User Manual
Qedit for Microsoft Windows
Introduction
Here we describe Qedit for Windows. Qedit for Windows client lets you edit local
MPE/iX and HP-UX files from a single MS Windows program. It consists of a
Windows editing client and an MPE/iX or HP-UX editing server that work together
to edit your host files for you. To take advantage of Qedit for Windows, you need
both the Qedit client and the Qedit server.
Qedit for Windows uses the popular TCP/IP protocol for communicating between
the client and the server (this is the same protocol that you use to access the Web).
Configuring the Qedit server software requires creating the correct TCP/IP
environment for Qedit for Windows.
Server Process
By default, the Qedit server uses the MPE/iX Remote Process Management (RPM)
service to start each server session. With RPM, the client sends a program name and
an Info= string along with logon information to the RPM listening process. The RPM
listening process then validates the user logon and starts the specified program with
the Info= string. The server process is seen as an MPE/iX session, but the process is
not included in your user limit. The Qedit server software is not available for MPE
V.
Logon Sequence
When you use an MPE/iX connection to open a file in Qedit for Windows, this is
what happens:
Qedit 5.9 for HP e3000 User Manual
1.
A new host session is started, and the user name and passwords are
validated (this includes additional logon processing by products such as
SECURITY/3000).
2.
The Qedit client asks for the program Ci.Pub.Sys to be run with an Info
string. For example,
qedit.pub.robelle "-d"
The "" is the IP address of the Qedit client.
3.
The Qedit process starts, and it verifies that you are authorized to use
Qedit in server mode.
Qedit for Microsoft Windows • 55
4.
Any system-wide Qeditmgr files are always processed. Processing
account and group Qeditmgr files is optional and must be enabled in
the client.
5.
The requested file is opened.
6.
A response is sent to the client.
It is important to note that logon UDCs are not executed as part of this process. Any
environment variables or file equations that are set up as part of a logon UDC will
not be in effect for the Qedit server process.
The default protocol is usually sufficient at most sites. However, some customers use
firewall devices that further restrict access to their HP e3000, in which case the
default protocol might not work.
For this reason, the server offers the Firewall protocol. Because the Firewall protocol
needs to have a Qedit listener running at all times, you should add it to your system
startup procedure. If the job is not running, all new connection requests are rejected.
:stream qserver.qeditjob.robelle
Currently, the only way to stop the job is to abort it.
With this setup, the server is run as a listener similar to a UNIX daemon. It waits for
incoming connection requests on a specific port number. Like the HP-UX server, the
default port number is 7395. If you want to use a different port, you have to modify
the Qserver job stream. Upon receiving a request, the listener passes the information
down to RPM, which then takes over.
QEDSERVMODE JCW
The Qedit server process always executes the commands in the system-wide
Qeditmgr files (e.g., Qeditmgr.Pub.Sys). Processing of the account and group
Qeditmgr files can be enabled in the client. To indicate that you are using the Qedit
server in either the server or the non-server mode, which are not exactly the same,
we provide a JCW called QEDSERVMODE. QEDSERVMODE is set to zero (0) if
you are in non-server mode, and non-zero if you are in server mode. If you are using
the Qedit server, you should modify your Qeditmgr file so that few, if any,
commands are executed in server mode. For example,
if Qedservmode = 0 then
set extprog mpex.pub.vesoft
endif
Log Files
The Qedit server can only communicate with Qedit clients. To help system managers
see what is happening with the Qedit process, Qedit for Windows writes to three log
files: the access log, the error log, and the trace log.
Console Messages
If Qedit cannot access any of its log files, it writes the log message to the system
console. You can also enable console logging with the Debug command in the
Option menu of the Qedit client. If someone is having trouble establishing a Qedit
for Windows connection and the Qedit log files on the host do not include a message
for this connection, check the system console. If Qedit was unable to open the log
files, it probably reported the message on the system console.
56 • Qedit for Microsoft Windows
Qedit 5.9 for HP e3000 User Manual
Access Log
Every time a Qedit client makes a connection to the server process, an entry is
written to the access log file in which the IP address of the client is logged. The
numeric for the IP address is logged, along with the port number used to
communicate with the client.
Error Log
Any error conditions encountered by the Qedit server process are written to the error
log file. If you suspect a problem between the client and the server, start your
diagnosis by looking at the end of this log file.
Trace Log
By default, Qedit does not log messages to the trace log file. However, you can
enable trace file logging by using the Debug command in the Option menu of the
Qedit client. The trace log file can grow to become very large because Qedit
messages are constantly being added to it. These messages assist in understanding
the communication between the Qedit server process and the Qedit client. In many
cases, their detailed information is the only way to diagnose a problem.
Log File Names
If you run Qedit as Qedit.Pub.Robelle, the three log files are located in the Qlog
group of the Robelle account. If you renamed Qedit or run it from a different group
or account, the group and account names for these log files will automatically be
adjusted. See the chapter "Installing Qedit" for more details.
Qedit 5.9 for HP e3000 User Manual
Qedit for Microsoft Windows • 57
Qedit Issues and Solutions
Running Qedit with Reflection
Walker Richer & Quinn produces Reflection, the well-known terminal emulator for
IBM PCs, which can be combined with Qedit in a number of useful ways.
RPCVERSION JCW
When you run Qedit, it attempts to detect what type and version of Reflection you
are using. The RPCVERSION JCW will be to one of these values:
0
don't know if this is Reflection
1
this is not Reflection
xxxx
type and version of Reflection installed
For more details on RPCVERSION, see JCWs under the main ACCESS help
keyword.
Using a Command File to Start Up
At startup, Qedit usually attempts to identify the terminal model number. This
involves some invisible interaction with the terminal (status requests, etc.). Suppose
you have a Reflection command file that runs Qedit and then executes a Qedit
command:
transmit "run qedit.pub.robelle^M"
wait 0:1:0 for "^Q"
transmit ":mail^M"
This sequence of commands now fails, because the :mail command is transmitted
as the terminal status response. To fix this command file, wait for the Qedit prompt
("/") and then a DC1 (Control-Q):
Qedit 5.9 for HP e3000 User Manual
Qedit Issues and Solutions • 59
transmit "run qedit.pub.robelle^M"
wait 0:1:0 for "/^Q"
transmit ":mail^M"
Alt-Y vs. :Reflect
Q: Why do some Reflection command files work fine when I execute them from the
Alt-Y command line, but go screwy when I execute them using Qedit's :Reflect
command?
A: Qedit's :Reflect command sends an escape code to Reflection to invoke the
command, then Qedit waits for Reflection to send back a status code to indicate
when the command is finished. While Qedit is waiting for the result code from
Reflection, it isn't capable of executing other Qedit commands - it's already
executing a Qedit command! The only thing that Qedit is capable of doing while it's
waiting is to execute any MPE commands that Reflection might send to the HP
e3000. The reason why MPE commands must be accepted is that Reflection sends a
:Run command for PCLINK whenever a file transfer is requested.
As long as the command or command file doesn't attempt to transmit any data to the
HP e3000, :Reflect will probably work the same way as Alt-Y.
For example, here is a Reflection command file that works from Alt-Y, but not from
:Reflect.
; BYE
; This command file gets me out of Qedit, logs me off
; the HP e3000 and exits from Reflection.
;
transmit "exit^M"
wait 0:01:00 for "^Q"
transmit "yes^M"
wait 0:01:00 for "^Q"
transmit "bye^M"
wait 0:01:00 for "CONNECT"
wait 0:00:05
hardexit
Qedit and Reflection File Transfers
Reflection file transfers work at the MPE level or within Qedit, without any change
to Reflection's Host Startup Sequence. Reflection, versions 2.2 and later, has the
ability to read Qedit's special files and download them to your PC as ordinary flat
files. You don't need to do a Keep before a file transfer.
If you transfer a PC file to your 3000 and try to Open it in Qedit, you get an error
message.
Error: you can only Open Qedit workfiles (code=111)
Open is Qedit's command for getting into a file quickly. You can only Open files that
are in Qedit format. To edit any other file type, you must Text it instead (Text is
slower then Open). Qedit users are accustomed to instant access to the files they
need. Reflection 2.2 and later can upload to Qedit files as well as download them.
You simply append ";Q" to the host file name on the file-transfer screen or in your
Send command line. Reflection does the rest.
When you work in Qedit, you are working on files that have a language (Set Lang
FORTRAN, Pascal, COBOL, SPL, Job, or Text) and a record length (Set Length). If
you copy a Qedit file to your PC and then back again to the HP e3000, Reflection 2.2
returns a file with the same Qedit attributes by writing a label to the PC file that
describes the Qedit file:
60 • Qedit Issues and Solutions
Qedit 5.9 for HP e3000 User Manual
RECSIZE=80; LANGUAGE=3
When Reflection transfers a file to the HP e3000 with the ;Q option, it uses the label
in the PC file to create a proper Qedit file. Thus, you can send a COBOL file from
Qedit to your PC and return it to Qedit later and still have it recognized as COBOL.
Here is the complete list of Language codes for Qedit files:
1
SPL (72-byte records)
2
FORTRAN (72-byte records)
3
COBOL without comments (66-byte records)
4
RPG (80-byte records)
5
Job (80-byte records, Keep UNN)
6
Text (Set Length sets record size up to 256 bytes)
7
Pascal (72-byte records)
8
COBOLX with comments (74-byte records)
9
Data (Set Length sets record size up to 8,172 bytes)
Qedit files are downloaded without sequence numbers, since PC tools seldom use
sequence numbers. When a PC file is uploaded into Qedit, new sequence numbers
are assigned to the lines. If you download a Qedit file containing PC data, such as a
Reflection command file or an Assembler program, you don't want a label at the
start. Use Set Lang JOB for such files, since a JOB file has 80-byte records without
sequence numbers. When you download a Qedit "job" file, Reflection does NOT add
a label to it, since "job" is the default format when uploading to Qedit format.
Form Feed Causing Return/Line Feed
In Modify, the Lengthen control code (Control-L) means edit the end of the current
line. However, in recent versions of Reflection, ^L is executed by the PC as you type
it and causes a Return/line feed. If this is happening to you, you can change the
default in Reflection. Press Alt-Y for the Reflection command line, type Set DoForm-Feeds No, press Return, then type Save and press Return again to save the new
default to your current configuration file.
Typeahead and Visual Mode
On MPE/iX, Reflection's typeahead must usually be disabled while in Visual mode,
since MPE/iX no longer sends the DC1 trigger needed to make typeahead work.
Qedit takes care of disabling and re-enabling typeahead for you, except for recent
versions of Reflection, where typeahead has been rewritten to work even on
MPE/iX.
Please Note. The Reflection typeahead has nothing to do with the MPE/iX typeahead
feature. When you use the MPE/iX typeahead feature, Visual mode disables it and
re-enables it when you go back to Line mode.
Completion Codes
If you are using version 2.00 or later, Qedit automatically enables completion codes
on Reflection commands. If these have been disabled with Set Disable-Comp-Codes
YES, you will find that your terminal hangs when Qedit attempts to execute a
Reflection command; just press Return to get out of this situation. To avoid this
Qedit 5.9 for HP e3000 User Manual
Qedit Issues and Solutions • 61
situation, you press Alt-Y, type Set Disable-Comp-Codes NO, press Return, then
type Save and press Return again to save the new default to your configuration file.
Controlling the PC
The Reflect command allows you to execute any Reflection PC command from
within a Qedit usefile, UDC, or command file. This allows you to do things like
automatically download and upload files and run programs.
The Reflect command can also be used in batch jobs to control PCs that are directly
connected to the system, even back them up. For more details, see the :Reflect
command.
Accidental Exit from Reflection
If you use Reflection for DOS, and you press Alt-X while in Visual mode, some
versions of Reflection allow you to recover.
Get back into Reflection. Your usual method is okay, unless you use a command file
that performs other deeds, such as logging you on. A command file would send the
logon commands to a puzzled Qedit session, so use "r1" at the DOS prompt instead.
Back in Reflection again, press Alt-M for the Modes function keys. Ensure that none
of the labels on the display show an asterisk (i.e., are activated) except for the
Remote Mode key.
Press Return or Enter -- Qedit accepts either one. If you're back in your Visual mode
session, Qedit prints the status line with an error. It might be No // at the end, so no
UPDATE (see qscreen) or maybe Read error on CRT. Try again or reduce
speed. Type an asterisk after the home line arrow (===>), and press F7. If the
function keys are properly defined for Qedit, your file appears. Any changes you
made to the screen between your last update and the time you pressed Alt-X are lost.
The qscreen file is of no use in this case. Sometimes Qedit is slow to display the
status line and error message. If you see some flashing on the screen that hints at
activity, be patient. But if nothing happens when you press F7, or if random
characters appear right after the asterisk, it probably means that F7 is not defined
properly. But we can fix that.
Display the menu to define the function keys by pressing Ctrl-F9. To set these back
to the default values, press F3. The labels become F1, F2, F3... Press F9 to activate
the changes and go back to your regular screen. Pressing F7 should now work; then
press Return. Qedit may display an error message, such as "UNKNOWN
COMMAND NAME", but you will still get your file back. Again, changes to the
screen after the last update will have vanished.
In the worst case, you will not be able to recover. Log on from scratch. When you
open your file, Qedit will display the message: Warning: Recovery. Your file will
be current up to your last update.
Changing the Exit Keystroke
The Alt-X keystroke for exiting from Reflection back to DOS is too close to the AltD (delete line) and Ctrl-X ("re-think") keys. Accidentally pressing Alt-X and
shutting down Reflection in the middle of a Visual screen is pretty disastrous. WRQ
has added a "remappable keyboard" in Reflection that allows the user to specify
which keys perform what functions. The exit-to-dos function can be activated by a
different, harder-to-type key sequence.
62 • Qedit Issues and Solutions
Qedit 5.9 for HP e3000 User Manual
To remap your keyboard in Reflection for DOS, first create a DOS file called
REMAP.KBM with the following lines:
KEYBOARD-ID = ENHANCED
TERM = HP
alt x
= null
alt ctrl x = exit-to-dos
Then activate the changes by typing C:> KEYMAP REMAP.KBM R1.CFG at the
DOS prompt. See your Reflection user manual for full details. Reflection for
Windows also has a remappable keyboard, but uses a different method of
configuring it. See your Reflection for Windows on-line help or user manual for
details.
Running Qedit in MPE/iX
Running Qedit on MPE/iX is the same as running it on MPE V, with a few minor
differences. We have made a number of changes to Qedit (regarding EOF and disc
space) due to differences between the MPE V file system and the new MPE/iX file
system.
Unresolved Externals on MPE/iX 4.0
If you try to run Qedit on MPE/iX 4.0, you might get the following errors:
UNRESOLVED
UNRESOLVED
UNRESOLVED
UNRESOLVED
EXTERNALS:
EXTERNALS:
EXTERNALS:
EXTERNALS:
_thd_errno (LDRERR 512)
_thread_set_error (LDRERR 512)
thd_lock_lang_mutex (LDRERR 512)
thd_unlock_lang_mutex (LDRERR 512)
These messages indicate some missing routines from the C library. If you are not
planning to upgrade to a more recent version of MPE/iX, you should contact Robelle
technical support. We can provide you with an additional file that will fix these
problems. Someone on our technical support team will be happy to ship this file to
you and instruct you in its installation.
Compiling on MPE/iX
MPE/iX comes with both CM compilers from MPE V and NM compilers. The CM
compilers work the same way that they did with MPE V. With Qedit, we provide an
XL library that allows the NM compilers to read Qedit files as if they were standard
files (the file name is Qcompxl.Pub.Robelle). You only need to change the compiler
command files in Pub.Sys so that they have an "XL=" clause on the :Run command.
We provide a job stream to make the needed changes to the command files for you;
see the "Installing Qedit" chapter. Once the changes are made, the NM compilers can
read both Qedit files and Keep files, whether activated within Qedit or at the MPE/iX
prompt.
:pasxl source
:run qedit.pub.robelle
/text source
/pasxl *
XDB: the Symbolic Debugger
If you :Run Xdb.Pub.Sys with XL= "qcompxl.pub.robelle", XDB can display source
files that are in Qedit format. For COBOL/iX, the debugger uses the compiler listing
Qedit 5.9 for HP e3000 User Manual
Qedit Issues and Solutions • 63
instead of the source file, so an interface isn't necessary (the compiler, not XDB,
reads the Qedit file).
Command Files and Variables
MPE/iX has command files, variables and the :While command. All of these work in
Qedit as well, including Hppath when looking for command and program files. Qedit
supports command files, :While commands and Hppath on MPE V (using Set
Hppath), but doesn't provide variables (although you can insert JCW values into both
command files and UDCs by using the !cierror notation).
Visual Mode
On MPE/iX, it is very important that you configure your terminal with XON/XOFF
Pacing (both Receive and Transmit). If you have Transmit Pacing set to None,
Visual may fail with "Insufficient System Resources". If you use Qedit Visual on the
console, you should configure the terminal for ENQ-ACK protocol as well (prior to
MPE XL 2.0).
If you have problems with DC1 hangs, first ensure that you are logged on as
TERM=10 (or another Term Type that prompts for input with a DC1); you can
determine this by enabling Display Functions, then press Return and see if the
computer prints a DC1 Control Character after the regular prompt character).
Second, check that you have enabled XON/XOFF Pacing on your terminal. Third,
see if your modems are configured to pass XON/XOFF through. Fourth, try
disabling typeahead.
EOF vs. LIMIT
Under MPE/iX it is very common to have a LIMIT of 4 million and an EOF of 400.
This is because the large LIMIT does not impose a large extent size on the MPE/iX
file, due to the unlimited number of extents. When Qedit Texts a file, it remembers
the number of records beyond the EOF and adds that count to the size of the file on a
later Keep. Qedit now restricts that extension beyond the EOF to 100,000 records.
Disc Space for Files and Xltrim
MPE/iX cannot operate on a file unless it has about 256 sectors of disc space
allocated to it. As a result, Qedit files which used to occupy 30 sectors often occupy
256 sectors or more. In effect, the minimum extent size increases dramatically.
MPE/iX has enhanced the FCLOSE intrinsic to deal with this problem. If you
specify bit 11 of the close options parameter, MPE/iX releases the disc space beyond
the EOF while the file is not in use. Qedit uses this option, which is operational in
version 1.1 of MPE XL.
See also the Xltrim command, which allows you to trim back unneeded disc space
for a group of files in a single command.
Extents
Qedit still creates files on MPE/iX with the number of extents (1-32) that would be
desired on MPE V. The reason is that this information, while ignored by MPE/iX in
allocating disc space, is remembered with the file, and is used if the file is
transported to MPE V via STORE/RESTORE.
64 • Qedit Issues and Solutions
Qedit 5.9 for HP e3000 User Manual
Qedit as the HPDesk Editor
HPDesk users can configure an external editor. However, HPDesk allows only one
option for this editor: it must be invoked by passing the file name to edit via the
Info= string.
Configuring HPDesk
To change the default editor in HPDesk, you need to modify your individual Profile.
To do this, enter HPDesk as you usually would. From the main menu (choice 0),
select option 10 (Admin.). From the administration menu, select F2 (Profile). From
the profile menu, select F2 again (Next Options). You should see a screen similar to:
Edit and Create Options
Entry method for creating messages/comments ...
[ ]
Entry method for creating text items ...
[ ]
Editor for editing text items
[ ]
Values can be:
1.
2.
3.
4.
5.
Line by line text entry
Screen text entry
Slate editor
HPWORD or screen for non-HP terminals
External editor
You must make two sets of changes to this menu. First, enter "Qedit.Pub.Robelle" as
the external editor (value 5). Second, change each of the three editor options to 5,
then press Enter. After your changes, the screen should look like the following:
Edit and Create Options
Entry method for creating messages/comments ...
[5]
Entry method for creating text items ...
[5]
Editor for editing text items
[5]
Values can be:
1.
2.
3.
4.
5.
Line by line text entry
Screen text entry
Slate editor
HPWORD or screen for non-HP terminals
External editor Qedit.Pub.Robelle
Configuring Qedit in HPDesk
Because HPDesk does not provide any Parm= options, you can pass in a Parm value
by placing it in the QEDPARMBITS JCW. Configuration commands can be placed
in Qeditmgr files.
DeskQed
Older versions of Qedit did not support passing in the file name via Info=. Instead, a
program called DeskQed acted as an interface between HPDesk and Qedit. You no
longer need to use DeskQed, but we document DeskQed here as a reference for those
who are still using it.
Qedit 5.9 for HP e3000 User Manual
Qedit Issues and Solutions • 65
Because old version of HPDesk does not provide any Parm= or Info= options, the
DeskQed interface uses two JCWs, DESKQEDPARM JCW and
DESKQEDVISUAL JCW, and a default command file, to configure Qedit for
editing from HPDesk.
DESKQEDPARM JCW
When Qedit starts up, it always executes configuration commands in
Qeditmgr.Pub.Sys. Optionally, you can get Qedit to execute commands in
Qeditmgr.Pub.logonaccount and/or Qeditmgr.logongroup. In the HPDesk/DeskQed
environment you use these optional Qeditmgr files by setting a JCW before
executing HPDesk.
:setjcw deskqedparm=1 {use Qeditmgr.Pub.logonaccount}
:setjcw deskqedparm=1 {use Qeditmgr.logongroup}
:setjcw deskqedparm=3 {use both of the above}
DESKQEDVISUAL JCW
DeskQed assumes that you do not have an HP terminal and that you would like to
edit messages in Line mode. Setting the DESKQEDVISUAL JCW to any nonzero
value places Qedit directly into Visual mode when editing an HPDesk message:
:setjcw deskqedvisual=1
Default Usefile
When DeskQed creates Qedit, it executes an optional usefile called
DeskQed.Qlibdata.Robelle. You can add default configuration values to this file
(e.g., Set Limits Sys Off); you should only use Set commands in
DeskQed.Qlibdata.Robelle.
Version Entry Point
DeskQed does not print any banner or version number when it is run. To find the
DeskQed version number and the status of the two configuration JCWs, use the
version entry point:
:run deskqed.qlib.robelle,version
DESKQED/QLIB/Copyright Robelle Solutions Technology Inc. 1988
(Version 0.4)
DESKQEDPARM
DESKQEDVISUAL
=
=
0
1
Notes on DeskQed
DeskQed requires the temporary file DeskQscr. If you open this file in Qedit, invoke
HPDesk, and then try to edit a message, DeskQed fails. A special message is printed
in this case, warning you to return to Qedit and close DeskQscr before invoking
HPDesk. Your original message remains unchanged in HPDesk.
DeskQed always runs the program file Qedit.Pub.Robelle. There is no way to change
this.
Getting Programs to Read Qedit Files
When you install Qedit, we provide interfaces to most of the MPE compilers, but
you may want some other programs to be able to read Qedit files. Some programs,
such as PowerHouse and Splash, already read Qedit files. For a list of such tools,
type help tools.
66 • Qedit Issues and Solutions
Qedit 5.9 for HP e3000 User Manual
There are four ways to get a program to understand Qedit workfiles: Qinput,
Qcompxl, Qeditaccess, and Qedify.
Qinput
If you don't have the source code, your can try running the program inside Qedit with
the Qinput option. See the :Run command for details. This option will pass a Qedit
workfile into a program through a message file.
Qcompxl
An NM program that reads a source file may be able to read Qedit files if you run it
with XL="Qcompxl.Pub.Robelle". This is the same interface we use for the NM
compilers from HP. It simulates most of the file system intrinsics and makes Qedit
workfiles look like ordinary disc files.
Qcompxl cannot be combined into a single XL file along with other XL files, not
even other Robelle XL files. In particular, do not put Qcompxl into the System XL:
you may get a system abort.
Qeditaccess Subroutine
If you have the source code, insert calls to the Qeditaccess routine and recompile.
Qeditaccess is a part of the Qlib Contributed Library and is described in
Qcopy.Qlibdoc.Robelle. It can read either Qedit files or regular Keep files and has
been easily merged into many software tools.
Software vendors and Qedit users are authorized (even encouraged) to include
Qeditaccess in programs they distribute. A native-mode version is available as well.
Qedify
Some CM programs can be converted to read Qedit workfiles by running them
through the same Qedify program used to make the MPE compilers smarter. This
does not work for all programs; they must be sequential processors and must only
call the intrinsics that the Qedit Interface Library "traps" (i.e., no calls to Freaddir on
Qedit files and no calls to the Pascal run-time library). A number of programs have
been successfully "qedified": DBSCHEMA, Basic Interpreter, RJE, and MRJE (be
certain to disable Control-Y), and Fastran.
The first step is to build a new group in your account called Q. To convert a
program, copy the program file into the Pub group of your account, then
run qedify.pub.robelle,q;parm=1.
You are prompted for the file name, an option that determines how to interpret Qedit
files, whether to process $include, whether to disable the Control-Y "Abort"
message, and whether to always run the program in DS priority. Then Qedify
modifies the program file to contain calls to the CM compiler interface.
Here is an example of Qedify:
Qedit 5.9 for HP e3000 User Manual
Qedit Issues and Solutions • 67
run qedify.pub.robelle,q;parm=1 {,Q and Parm=1}
What is the name of the program file?
DBSCHEMA
You have five options for how to interpret Qedit files
for your program. Remember that there are many types
of Qedit files (COB,COBX,SPL,FTN,RPG,JOB,TEXT,PASC)
Which input-format option do you select?
1. Like COBOL, sequence numbers in columns 1 through 6.
2. Pascal-Fortran source, numbers in columns 73-80.
3. RPG, no sequence numbers, $control in column 6.
4. No sequence numbers at all, 80 data columns.
5. Take format from type of input file (max 80).
Input-format option =
4
The Qedit library can look for and process $include and
$qdebug commands. By default, it leaves this to your
program.
Enable $include processing? [no]:
N
Would you like to disable the Control-Y abort
question of the Qedit interface? [no]:
Y
Always run this program in DS priority? [no]:
N
DBSCHEMA
CONVERTED FROM PUB TO Q
The improved program file now resides in the Q group of your account, and has the
same file name as the Pub file. To run the converted program, you must link it to the
Qedit interface routines. For example:
:segmenter
-sl sl.q,400,2
-buildusl tempusl,400,4
-auxusl qcompusl.pub.robelle
-copy segment,qeditlib
-addsl qeditlib
-exit
:run yourprog.q;lib=g
Qedify and $Include
The CM compiler interface normally leaves Include commands to the user program,
since the CM Interface allows up to 17 concurrent Qedit file opens, which should
accommodate any reasonable level of nesting for Include files. If your CM program
does not provide an Include facility, you can have the Qedit interface provide that
facility for you.
If you answer Yes to Qedify's Include question, Qedify asks you two more questions
about processing Include files:
Would you like $included lines to show their sequence
numbers (the default is to show spaces instead)? [no]:
There is an option to turn $INCLUDE lines into comments.
What kind of comments do you want?
(0=none,1=SPL,2=Pascal,3=COBOL,4=Fortran?) [none]:
When you use Qeditj1 or Qeditj1a to convert your CM MPE compilers, FORTRAN,
COBOLI and RPG are converted with $include processing enabled. All other
68 • Qedit Issues and Solutions
Qedit 5.9 for HP e3000 User Manual
compilers, including Trancomp, Ftn (77), COBOL, COBOLII and Pascal let the
compiler process Include files. You could re-Qedify a particular compiler by hand if
you wished to override these choices.
Editing Wide Files
Versions Qedit 4.7 and later support files with lines up to 8,172 characters. If you are
trying to edit a file wider than that, Qedit truncates the lines to the maximum. To
support these wide files, a new workfile format has been created and is generally
referred to as Wide-Jumbo.
Using the New Command
You can create a new, empty Wide-Jumbo workfile by using the New command or
an option on the Text command.
When creating a new file, you can force it to have a Wide-Jumbo format by setting
the Language to Data and the Length to a value larger than 1,000 before issuing the
New command.
/Set Language Data
/Set Length 2500
/New newwork
These commands create a new permanent workfile called Newwork. If you want to
create a scratch file with these attributes, enter the New command by itself.
Using the Text Command
If you use the Text command on a file with lines wider than 1,000 characters, Qedit
automatically builds a Wide-Jumbo scratch file with the appropriate characteristics.
If you use the Text command on a file with lines less than 1,000 bytes, you can
override the Qedit workfile format by appending a workfile format keyword to the
workfile name:
Text workfile,WIDE {forces Wide-Jumbo workfile}
The keyword may be shortened to any leading substring, but the comma is required.
You can use the Wide keyword to override Qedit's decision and force it to use the
wider format.
Let's assume that we have a file called Funny with 80-character lines. To read this
file into a Wide-Jumbo workfile, you would enter:
/text wrkwide,WIDE=funny {this creates a Wide-Jumbo workfile}
Language is now JOB
678 lines in file
/v open
Open: WRKWIDE.SRC.DEVACCT JOB W-jumbo Length:80 Margins:1/80
The syntax requires that you name the workfile and make it permanent. Notice that
Qedit still assigns a Language based on the original file characteristics. If you want
to go beyond 1,000 characters, you have to change the Language and Length settings
after using the Text command on the file.
If you want a scratch file that is a Wide-Jumbo workfile, you should use
Qedit 5.9 for HP e3000 User Manual
Qedit Issues and Solutions • 69
/Set Lang Data
/Set Length 2500
/AQ 1=funny
Lines, Strings and Ranges
Character strings can be used of line numbers to qualify lines on most commands. In
its simplest form, a command can have a single string using all the search window
defaults.
/List "enhancement"
The search string can be further qualified using temporary window settings as in:
/List "enhancement" (Upshift 20/50)
This example searches for the word enhancement regardless of the case used in
columns 20 to 50.
Qedit allows up to 10 search strings on a single command. Individual strings are
separated from each other with the OR keyword. Each string can have its own
temporary window.
/List "enhancement" (U 20/50) or "bug" or "customer" (1/30)
The search range can be different depending on the command it is used on. For
example, a List command searches all the lines in the file by default while a Find
command starts from the current line. The search range can be specified on
individual commands using a rangelist. A rangelist is often specified using line
numbers (absolute or relative), special keywords (First, Last, All) or characters (@,
*, [, ]). To define a block of lines, the user can enter 2 line numbers separated a slash
"/" e.g. 1/6.
It is also possible to define a block of lines using a string range. This syntax allows
the use of strings to define the start and end of the range. A string range can also be
combined with a numeric line range to further define the block. Here are some
examples:
/List "start-proc" / "end-proc"
/Change "a" "b" "start-proc" / "end-proc"
/Delete "start-proc" / "end-proc" 20/100
The List command above finds the first occurrence of start-proc in the file and
uses it as the range start location. It then finds the first occurrence of end-proc
starting from the start location. It uses that line as the range end location. Finally, it
lists all the lines between the 2 locations. By default, List starts at the beginning of
the file.
The Change command above replaces all occurrences of the letter a with a b in the
lines between (and including) start-proc and end-proc. By default, Change
starts at the current line.
The Delete command above removes all the lines between (and including) startproc and end-proc found in lines 20 to 100. By default, Delete starts at the
beginning of the file.
A string range does not behave like a rangelist e.g. 1/20 in all cases. For example, the
first statement is not a valid construct with the second statement is.
70 • Qedit Issues and Solutions
Qedit 5.9 for HP e3000 User Manual
/Delete "bug" "start-proc"/"end-proc"
Error: Linenum
/Delete "bug" 10/30
You can use the Find command and the ZZ marker to work around the problem. If
you enter a simple strings on a Find command, Qedit stops at the first string
occurrence and sets the current line. You can then perform any operation on that line
or use it as a starting point. If you specify a line range, the Find command sets the
ZZ marker to the block of lines. You then use the ZZ marker on subsequent
commands.
/F "start-proc" first
5
Start-Procedure.
(1)^
/F "start-proc"/"end-proc" first
Lines 5/11 saved in ZZ
/Delete "bug" zz
8
_bug-display-section.
1 line Deleted!
Qedit 5.9 for HP e3000 User Manual
Qedit Issues and Solutions • 71
Using Qedit with MPE
Programming Languages
Introduction
Here we describe how to combine Qedit with popular MPE programming tools.
When you install Qedit, we "fix" the MPE compilers to read Qedit workfiles so that
you won't need to Keep before compiling. Many of the most popular third-party
tools, such as PowerHouse and MPEX, already read Qedit workfiles. We also
provide Editerr, a method for trapping and fixing compile errors with COBOL,
Pascal, SPL, and C/iX.
/set lang cobol
{what type of source file is this?}
/compile *
{compile current file and language}
/prep
{prep $oldpass into $newpass}
/list "cust"(smart) {Smart means ignore "cust-rec"}
/set udc udc.catalog.robelle {:COBERR and :EDERR}
/coberr cob74xl,*
{compile and display each error}
/ederr pascal,*
{same for Pascal}
Editerr: Trapping Compiler Errors
Qedit's :Editerror command traps compiler syntax errors and pulls up the offending
lines of source code for you to correct. Of course, you need a custom link to each
compiler for this to work (:Editerror links are included in the SPLash! compiler from
Software Research Northwest). We provide a utility, Editerr, which formats compiler
errors for HP's COBOLII (ANSI 74 and 85), SPL, Pascal and C/iX compilers.
Editerr is invoked through User Commands in UDC.Catalog.Robelle. There are two
commands: Coberr, which traps compiler errors in COBOL source, and :Ederr,
which traps compiler errors in SPL, Pascal and C/iX source. The User Command
compiles the source file (you specify which compiler to be used). If there are any
errors, the Editerr utility generates a list of errors for the :Editerror command. The
User Command then puts you into Visual mode on the line in the source file where
the first syntax error was found, and shows the first line of the compiler error
message at the top of your screen. To see the next error you press F4. To see the
previous error you press F3. Qedit takes care of Opening and Shutting your source
files, or Texting and Keeping them if they are not Qedit files.
Qedit 5.9 for HP e3000 User Manual
Using Qedit with MPE Programming Languages • 73
Editerr can be configured to ignore compiler warning messages, as well as
nonstandard COBOL statement warnings. This is done by setting JCWs before
running the Editerr program:
:setjcw EditerrIgnoreWarn = 1
:setjcw EditerrIgnoreNonStd = 1 {COBOL only}
The Editerr utility identifies errors in COBOL Copylib members and Include files,
and allow you to correct them, as long as you have Write access to the copylib file.
For SPL, Pascal, and C/iX, Editerr attempts to identify errors in Include files and
allow you to correct them.
/set udc udc.catalog.robelle
/open srcfile
/visual
{or Text it}
{make changes, then try one}
{of the following commands}
/coberr ,*
{default is COBOL 85/iX}
/coberr cob74xl custrept.source {compile/fix}
/coberr co * uslfile
{use MPE V compiler}
/ederr pasxl *
{Pascal/iX}
/ederr ccxl *,objfile
{C/iX}
/ederr spl *
{SPL}
/shut
{or Keep}
HINT: In general, you use the same syntax as you are accustomed to using for
compiling, but you insert the word Coberr or Ederr in front of the command. For
example, instead of typing /cob85xl *, you type /coberr cob85xl *.
For MPE/iX systems, a native-mode version of the Editerr program is provided
which works with both the compatibility-mode and native-mode compilers. The
Qedit installation job, Install.Qeditjob.Robelle, renames the appropriate version of
Editerr into production, depending on whether your machine has MPE/iX or MPE V.
Limitations and Restrictions
1.
Editerr attempts to identify syntax errors in Include files for COBOL,
SPL, Pascal and C/iX. For COBOL, SPL and Pascal you must compile
your source with $control List, and include a comment at the end of
each Include file in the form
! end $include
<< END $INCLUDE >>
{SPL}
{uppercase or lowercase}
{ end $include }
(* END $INCLUDE *)
{Pascal}
* END $INCLUDE
{COBOL}
These comments are required for Editerr to determine where each Include file starts
and ends in the compiler listing. For C/iX, no special options or comments are
required.
2.
In order to correctly identify syntax errors in COBOL copylib
members, Editerr must determine where each copylib member starts
and ends in the source listing. This requires that the source file be
compiled with $control List.
COBOL allows copylib members to in turn copy other copylib
members. This is referred to as "nesting" copy statements. If you want
Editerr to recognize nested copy statements, do not use the NOLIST
option of the COPY statement.
3.
C/iX and Pascal source lines are restricted to 80 characters.
74 • Using Qedit with MPE Programming Languages
Qedit 5.9 for HP e3000 User Manual
4.
The Editerr utility only processes compiler listings that have 132-byte
records, with or without CCTL. We recommend that you use the
COBERR and EDERR UDCs, which build the compiler listing file
with the right characteristics.
Keep in mind that the compiler sometimes trips over its own feet: the line number
indicated by the compiler may not be the actual line in error. For example, forgetting
to terminate a statement with a period will flag a succeeding statement in COBOL.
Linking PowerHouse with Qedit
PowerHouse 4GL, by Cognos Incorporated, is comprised of several development
tools: QUIZ, QUICK, QDESIGN, QTP, QDD and PDL. Qedit/MPE works well with
PowerHouse for several reasons:
1.
PowerHouse can read Qedit files. This means that you can Open and
Shut files, and can compile without having to first Keep. PowerHouse
can read source files up to 256 characters wide, and thus supports all of
Qedit's language settings except Data.
2.
QUIZ, QDESIGN, QTP, QDD and PDL can be suspended, to make
subsequent invocations faster, and less demanding of system resources.
3.
Qedit can be configured as the default PowerHouse editor, and can thus
be invoked from within the PowerHouse tools.
4.
Qedit can edit PowerHouse subfiles.
Qedit takes advantage of these features to give you an integrated development
environment for PowerHouse, where you can switch instantly between editing source
files in Qedit, and compiling and testing in PowerHouse.
Invoking PowerHouse from Qedit
Qedit has always been an excellent workbench for PowerHouse programmers. The
PowerHouse components read original-format Qedit files directly, and all of them
(except for QUICK) can be suspended from Qedit for faster invocation. It is also
possible to use Qedit "shorthand" when invoking PowerHouse from within Qedit
("*" for current file, "$" for previous), provided the PowerHouse UDCs have been
slightly modified.
In the past we supplied modified UDCs for the various PowerHouse versions, but as
the UDCs were large, very complex, and changed frequently, supporting every new
version became a problem for us. We therefore developed a set of command files to
call the UDCs that Cognos supplies with your PowerHouse updates. They allow
Qedit shorthand and suspend the PowerHouse tools on exit:
parm auto=$null
anyparm otherparms=ZZZ
file qsource=!auto
if "!otherparms" = "ZZZ" then
quiz "auto=qsource suspend"
else
quiz "auto=qsource suspend" !otherparms
endif
file qsource = $null
Note that we have added one parameter to your invocation of the UDCs. This
parameter, the file name to execute, must be passed before the other run parameters.
You must first set the Cognos UDCs, as they're invoked from within the command
Qedit 5.9 for HP e3000 User Manual
Using Qedit with MPE Programming Languages • 75
files. Note also that UDCs have precedence over command files, so the command
files must have different names. We supply the following three command files:
QZ.QEDCMD.ROBELLE
{for calling QUIZ}
QD.QEDCMD.ROBELLE
{for calling QDESIGN}
QP.QEDCMD.ROBELLE
{for calling QTP}
QUICK doesn't allow suspension on exit, so we haven't supplied a command file for
it. You may wish to duplicate the above for QUICK (removing the "suspend"
parameter), to allow easy execution of specified compiled QUICK files:
/qk qkscrn
Using these command files, "qz *" will run QUIZ, and execute your current file.
On completion, Qedit will ask you whether it should keep QUIZ suspended:
Quiz is still alive.
Okay to HOLD onto it [no]?
Replying "yes" means that subsequent calls to QUIZ will be much faster. Of course,
suspending QUIZ keeps the dictionary open (one of the reasons why it is faster), so
you cannot change your current dictionary without first killing the suspended
process:
/kill quiz
/kill
{kill only QUIZ}
{kill all child processes}
Similarly, you would need to kill and rerun QUIZ to change any other run
parameters, such as CC= for conditional compile flags.
Configuring Qedit as Your Editor
Later versions of PowerHouse have a Revise command. This command invokes your
configured editor, tells it which file to edit, and optionally, tells PowerHouse how to
process that file upon return.
By default, PowerHouse invokes the Editor.Pub.Sys. file. Setting the :File equation
:file cogeditr=qedit.pub.robelle
configures Qedit to be your PowerHouse editor. We recommend that you add this
:File equation to your system UDCs. PowerHouse invokes Qedit with a ,Basicentry
entry point, and pass a file to be edited via a :File equation for Edttext.
In QUIZ,
> revise
invokes Qedit with the Quizsave file texted. Quizsave contains all the QUIZ
statements you have entered since the last Cancel Clear, Save Clear, or Set Save
Clear. After making your revisions, you will be asked whether you wish to save your
changes when you exit Qedit. Quizsave will then be re-executed by QUIZ. Use the
command
> revise filename
to edit a specific filename. On return to QUIZ, that file will be executed. To suppress
execution of the edited file on return to QUIZ, use the NOUSE option:
> revise filename NOUSE
See the PowerHouse manuals for a full description of the options available.
76 • Using Qedit with MPE Programming Languages
Qedit 5.9 for HP e3000 User Manual
Editing PowerHouse Subfiles
There may be occasions when you wish to use Qedit's powerful capability to edit
data stored in a PowerHouse subfile. A subfile has file labels containing a
PowerHouse "mini-dictionary" of the file's record structure. It is important that your
file editor preserve these labels, if you will subsequently use PowerHouse to read the
file: Set Work Label On will ensure that Qedit retains the file labels.
COBOL
As a COBOL user of Qedit, there are a number of topics you should be familiar with.
Selecting a Compiler
There are five possible COBOL compilers you could wish to use: COBOL 68, 74 or
85 for MPE V (CM), or COBOL 74 or 85 for MPE/iX (NM). Use the Set
Whichcomp command to select your CM compiler (the one invoked by the :Cobol
and :Compile commands).
/set whichcomp cobol 85 | 74 | 68 {Select CM compiler}
/cobol *
{uses compiler program named COBOL}
/cobolII *
{Compiles using the COBOLII compiler}
/cobolI *
{uses CobolI compiler, COBOL 68}
The Qcompxl.Pub.Robelle file contains the XL library, routines that intercept calls to
the MPE/iX file system. Use the COB74XL or COB85XL command files once they
have been modified to reference this XL.
Sequence Numbers and Comments
The following rules apply to standard COBOL source files. They do not apply to
COBFREE files, which are free-format files that do not have line numbers. COBOL
statements can start in any column and go beyond column 72. They cannot have
comments (tags).
In COBOL source files,the first six columns are reserved for the sequence number.
This means that the first column of your text area is actually column 7. When a Qedit
file has Set Lang Cobol, the first six columns are not displayed. Instead the sequence
number is displayed, in the form 105.1. To check what columns some text is in, use
the LT command (list template). You must remember the column numbers when
using the Change command to insert or delete columns. For example, you might
want to shift the first column three spaces to the right by inserting blanks.
/change 1 "
"
Error: Target
{wrong!}
/change 7 "
{right}
"
COBOL statements occupy columns 7 through 72 of each line. Columns 73 through
80 are reserved for comments. If you extend a COBOL statement into this area by
accident, you get a compiler error. To keep this from happening, Qedit has two Set
Lang values for COBOL. Set Lang Cobol limits your line length to column 72, while
Set Lang Cobolx allows you to use the comment area. In normal practice you would
do initial development with Set Lang Cobol, then switch to Set Lang Cobolx during
maintenance.
Qedit 5.9 for HP e3000 User Manual
Using Qedit with MPE Programming Languages • 77
/set lang cobolx
/c 73/80 "BobGreen"
Tagging Source Changes
When you have a file Set to Lang Cobolx, you can have Qedit automatically tag
source changes with a comment in columns 73 through 80. You might choose to tag
the changes with the date of the changes and perhaps the initials of the changer:
/set
/set
/set
/set
/set
/set
lang cobolx
x "rmg"
x date
x yymmdd "bg"
x list off
lang cobolx all on
{lines contain 80 columns}
{tag changes with a string (COBOLX)}
{tag changes with the date (COBOLX)}
{see Set X for more options}
{suppress listing of the tags}
{force all COBOL to COBOLX}
These configuring options can be made the default by putting them in one of your
Qeditmgr configuration files. Other options that are useful with COBOL:
/set window(7/72)
/set wrap on
/list "cust-rec" (smart)
/set maxdata 31000
{change without shifting comments}
{wrap overflow lines to column 12}
{look for "symbols" only}
{default Maxdata= for PREP}
Copylib Members
To edit Copylib members in Qedit, put the member name in parentheses and do a
:File command for "copylib".
/file
/text
/keep
/keep
/keep
copylib=copylib.pub.develop
(custrec)
{looks in "copylib"}
{saves changes}
(custrec2)
{new member name}
(custrec) copylib2
{different Copylib}
Notice that we can refer to other Copylib files by putting the file name after the
member name, rather than having to change our :File command. To create a new
Copylib file, use HP's Cobedit program.
To list the member names in a Copylib file, specify a pattern instead of an actual
member name.
/list (b@)
/list (@)
{names starting with b}
{all names}
Trapping Syntax Errors
The :Editerror command allows Qedit to pull up a compiler syntax error and the
offending line of source code and present them to you for correction. Of course, you
need a custom link to each compiler for this to work. The COBERR UDC is an error
processor for HP's COBOL 74 and 85 that uses the Editerr program to find and fix
syntax errors. See above for a complete description.
FORTRAN
There are several FORTRAN compilers available to you.
78 • Using Qedit with MPE Programming Languages
Qedit 5.9 for HP e3000 User Manual
/fortran *
/ftn *
/ftn 350/700
/set whichcomp ftn 77
/ftnxl *
{compile CM FORTRAN 66}
{compile CM FORTRAN 77}
{compile a line range!}
{make 77 the default}
{native-mode FORTRAN compiler}
If you always compile through Qedit, you can use $include commands to centralize
the definitions of COMMON blocks in separate source files. If most of your work is
with FORTRAN, you should configure Qedit with FORTRAN as the default
language for new files. You do this by putting the Set Lang Fortran command in a
file named Qeditmgr.Pub.Robelle. Other options that are useful with FORTRAN:
/set rl graphrl.lib.dev
/set fortran on
/set tabs hp on 7 17 27
/set wrap on
/list "custbase"(smart)
{default RL= on PREP}
{default for external files}
{customize tab stops}
{generate continuation lines}
{ignores embedded spaces!}
Pascal
To tell Qedit that you are working on a Pascal program do Set Lang Pascal. If Pascal
is your primary language, putting this Set option in Qeditmgr. Pub.Robelle (your
Qedit configuration file) makes Pascal the default choice. You compile your Qedit
workfile directly with either a Classic compiler or a native-mode compiler. For NM
compilers, you must first stream Qcompxl.Qeditjob to adjust the command files (see
Step 5 in the installation chapter). For CM compilers, you must first stream Qeditj1
or Qeditj1a to adjust the compiler program files (see Step 6 in the installation
chapter).
/text pas.source
/set lang pascal
/pascal *
/pasxl *
{standard MPE compiler}
{native-mode compiler}
The :EDERR UDC compiles your Pascal source file, finds the errors, and displays
the source and error messages on the screen for correction. See Editerr above for
details:
/ederr pasxl,*
/ederr pascal,src
Other Qedit options of interest:
/list "cust"(smart)
/text file,pascal
/aj 55
{ignore "cust_rec"}
{make external file pascal}
{justified = indented}
The MPE V HP Pascal compiler can abort with a stack overflow when compiling
large programs. To avoid this abort, insert the $bigcompile$ option at the start of
your Pascal source file.
C Language
C is a standardized programming language that is available on MPE V and MPE/iX.
If you are using Jumbo or Wide-Jumbo files, you can use Set Lang CC or Set Lang
CPP. If you are not using Jumbo or Wide-Jumbo files, we suggest Set Lang Job for
C files in Qedit because Job files are kept without line numbers.
Qedit 5.9 for HP e3000 User Manual
Using Qedit with MPE Programming Languages • 79
For C/iX, the :EDERR UDC can compile your program, find the errors and display
each on the screen with the cursor on the offending line, ready for correction. See
Editerr above.
/ederr ccxl *
For MPE V, there is one compiler available: CCS C. The CCS compiler can be
converted to read Qedit files; see the chapter on installation at the end of this manual.
SPL
SPL is the Systems Programming Language for the Classic 3000. SPL is Qedit's
default language, so you don't need a configuration command in Qeditmgr to set it.
/spl *
/set lang spl
/list "cust"(smart)
/aj 55
{compile SPL workfile}
{identify code as SPL}
{ignore cust'rec}
{justified = indented}
There is also a native-mode SPL compiler for MPE/iX, Splash from Allegro. The
Splash compiler reads Qedit workfiles without a Keep and can generate an "error
file" that is compatible with the :Editerror command. You can edit a Splash program
within Qedit, use the Splash UDC to compile it, and automatically have Qedit
position you to the proper spots in each source file where you have compile errors.
The UDC file is named Splashu.Pub.Splash and contains two UDCs of interest,
:SPLASH, and :SPLLK. In each of them, you will want to add a :File equation such
as FILE SPLERRS = SPLERRS to generate the error file. This causes the Splash
compiler to emit a permanent disc file named SPLERRS.
Then add the following command after the :Run of the compiler:
editerror splerrs visual
This command will find the first error, if any, and print the error message and the
line. If you then return to Visual, Qedit will be at the proper spot, with the compiler
error message at the top of the screen. You use the F4 key to find the next error, F3
to go back to the previous error, or F8 when you are done fixing errors.
If you have many programmers that use the same logon group, you will be stepping
on each other's Splerrs files. Modify the :File equation and the :Editerror command
to specify a unique file name for each programmer. This is not difficult on MPE/iX.
For example, use HP variables that store the User Name or the Session Name as part
of the unique file name.
TRANSACT
TRANSACT is a 4GL from Hewlett-Packard that runs on MPE V and MPE/iX.
When you install Qedit, the CM Trancomp program is converted to read Qedit files.
You will find it either as Trancomp.Q.Robelle, where it should be Run with Lib=G,
or as Trancomp.Pub.Sys. The TRANSACT/iX Compiler reads a Qedit file as the
main source file, but should be run with XL="qcompxl.pub.robelle" for Include files.
RPG
RPG files are like JOB files, in that they have 80-byte records and are "kept"
unnumbered. If you create an RPG program in a JOB file by mistake, you can
80 • Using Qedit with MPE Programming Languages
Qedit 5.9 for HP e3000 User Manual
convert the file to RPG with Set Lang RPG. Because RPG is column-oriented,
SMART string matching is ignored. The RPG compilers print the RPG source listing
with sequence numbers (1, 2, 3...); therefore, if you do a Renumber before a compile,
you can edit directly from the compiler listing. Full-screen editing in Visual mode is
especially handy for the columnar format of RPG code.
Users of RPG/iX can use the Qcompxl.Qeditjob job stream to convert command files
for RPG. This should allow you to compile a Qedit or Keep file at any point, either
within Qedit or at the MPE/iX prompt, just by invoking the normal command file,
rpgxllk or rpgxlgo.
BASIC
Even though the Basic Interpreter has an "editor" built into it, we regularly get
requests for the ability to edit Basic programs in Qedit. You can do such editing and
XEQ the Qedit file within the Basic Interpreter, but your system manager must
change the Basic interpreter for this to work. See the sections on installing the
compiler interface in the chapter on installation for details.
A side benefit of changing the Basic interpreter to read Qedit files is that Xeq files
can then have $include statements in them, allowing you to define subroutines and
common blocks in separate X-5 files. However, you must remember that the Qedit
line numbers are not the statement numbers of the Basic program. Each Basic
statement in your Qedit file must still have a valid sequence number at the start of it.
Segmenter
You can invoke the Segmenter from within Qedit using the :Segmenter command,
but then you must type your segmenter commands directly and wait for them to
complete. You can :Stream a job that invokes the Segmenter, but that does not
execute on your terminal where you can see it. Or, you can Run Segdvr.Pub.Sys with
a Stdin file that contains your Segmenter commands.
/list segprg23
1
usl $oldpass
2
auxusl splusl.source
3
copy segment,qhelp
3
copy segment,dateformat
4
exit
/:run segdvr.pub.sys;stdin=segprg23
You can use Prep and you can specify default values for RL and Maxdata (Set RL
and Set Maxdata) or use QMAP to make the PMAP readable.
Qedit 5.9 for HP e3000 User Manual
Using Qedit with MPE Programming Languages • 81
Common Uses of Qedit
Introduction
Qedit is much more than just a programmer's editor. For your day-to-day tasks, you
can use Qedit as a word processor, a file utility, and an operations tool.
Qedit as Word Processor
There are several ways to use Qedit for word processing.
QNote UDC for Occasional Memos
Some users would like to use Qedit's full-screen editing to write an occasional
memo, but feel intimidated by the range of features and options in Qedit. You can
make Qedit more accessible by providing a special UDC and usefile. You can use
our QNote UDC (from the file UDC.Catalog.Robelle).
:QNOTE [filename]
To invoke Qedit to create a new memo, use :QNOTE without any parameters. Qedit
puts the user straight into Visual mode, with configuration options suitable for
processing a memo. For example, the option Set Vis Update is ON, meaning that
pressing any function key updates the screen. The user is not faced with an "Okay to
clear?" message, because Qedit purges any existing Qeditscr file. When the user
presses F8 to exit Visual, Qedit updates the screen, Keep the new document as the
file Memo in the logon group, and ask the user to verify Exit. You should teach users
the MPE :RENAME command so that they can rename the file Memo, if they want.
To invoke Qedit to modify an existing memo, use :QNOTE filename (where
filename is a Keep file or Qedit file). When the user presses F8, Qedit asks
permission to Keep the file back into filename. The users should answer Yes to save
their work or No to discard it.
Justify Capability
Suppose you want to write a letter to your mother. You know how to build a new file
for it, or open an old one. You can create the rough letter using Visual or Add,
Modify, and Delete. But what if you want the letter to be extremely tidy? Mothers
like that sort of thing. Qedit has commands to help you produce a neat and tidy letter
or memo:
Qedit 5.9 for HP e3000 User Manual
Common Uses of Qedit • 83
/justify both 5
/justify center 10
/set just margin 65
/justify right 200
{even margins for paragraph}
{center line 10}
{right margin at column 65}
{right-justify line 200}
/set wrap on
/change 1/3 ""
/change 1 "
"
{wraparound for long lines in Add}
{shift left 3 columns}
{shift right 3 columns}
/set mod qzmod
/visual *
{visual line edit; try Control-Q}
{full-screen edit}
/l $lp all
{list on file LP, with line numbers}
/lq $lp all
{LP listing without line numbers}
/set list page on
{LP lists have page heads}
/add 50.1
50.1
$page
{causes page eject in LP list}
50.2
//
/add .1
{replace default date/time}
0.1
$title "Letter to Mom"
0.2
//
/set list name off
{remove file name from LP list}
/list $double $lp @
{double space LP list}
By combining these commands in various ways and using $page commands in your
text to define page breaks and running titles, you can produce a very nice LP listing.
Check Spelling
Qedit has built-in commands to use Spell's dictionaries to perform integrated spellchecking. The Spell command spell-checks a line range, while the Words command
spell-checks or searches for words.
/spell
/spell @
/spell 10/20
/spell "xyz"
{check
{check
{check
{check
/spellj 10/20
{check lines 10 through 20 and}
{modify lines with misspellings}
/words "rigth"
not found : rigth
current line}
current file}
lines 10 through 20}
lines containing "xyz"}
{check the word "rigth"}
/words "quicks@"
{find words prefixed with "quicks"}
word
: quicks
prefix
: quicksand
: quicksands
: quicksilver
: quickstep
4 matches
/words "vegetable!"
{find sound-alikes for "vegetable"}
word
: vegetable
soundex
: vegetable
: vestibule
: visitable
3 matches
If your UDC or command file for running the spell checker program is also called
"Spell", you must change its name. You must use :Spell to access the UDC.
84 • Common Uses of Qedit
Qedit 5.9 for HP e3000 User Manual
/:spell file
{we suggest "spellf" instead}
Prose: A Text Processor
When you license Qedit we give you a text formatter named Prose. Prose is in our
Qlib; it works well for user manuals and program documentation.
We use Prose for everything and find it flexible and reliable. It reads a Qedit or
Editor file of text and commands, and produces a final document on a screen, line
printer, LaserJet, or a disc file.
Prose can justify, underline, hyphenate, number pages and paragraphs, format the
page the way you want, produce an index, and produce a table of contents. If you
have a LaserJet, you can use the font cartridges and proportional spacing, as well as
draw boxes and lines. Prose can not do footnotes, or generate two-column output.
Prose User Manual
To print the Prose User Manual, using Prose, enter these commands:
/set udc udc.catalog.robelle
/file print;dev=lp,,copies
/prose prose.qlibdoc.robelle,*print
The UDC file contains two User Defined Commands for Prose. :PROSE formats a
specified "input" document to a specified "output" file (usually a printer, but defaults
to $stdlist), while :PDISC takes only an input file and formats it into a temporary
disc file named PLIST.
You can also use the Printdoc program to print the Prose user manual or any other
Robelle user manual. Run Printdoc.Pub.Robelle, and Printdoc displays a menu of
user manuals for you to choose from. You then answer a few questions about your
printer.
Templates for Prose
There are two template files, MANUALS and LETTERS, in the Qlibdata.Robelle
group. These files are designed to get you past the hurdle of deciding what Prose
options to use; they decide for you! Both template files are explained in the Prose
User Manual.
Fixing Hyphenation Errors
When you finish a Prose document, you usually need to make a couple of formatting
passes over it to resolve hyphenation problems. Use the :PDISC UDC to writes all
errors (including hyphenation errors) into a separate file named PERRFILE. Then
use Qedit to find and fix words that need hyphens:
/set udc udc.catalog.robelle
/open howmessy.doc
/:pdisc *
{format HowMessy Manual into PLIST}
Justify Command and Prose Documents
While editing Prose files, you will want to use the Justify Format command to make
the raw text more tidy and easy to read. This command adjusts text so that the words
fill the margins as much as possible, adjusting lines that are too short or too long.
You can configure Justify with Set Justify to start and stop justification when it
encounters certain characters in column one. This avoids having your format
commands and text all run into one long paragraph.
Qedit 5.9 for HP e3000 User Manual
Common Uses of Qedit • 85
/set justify stop ".+" start "` "
Using TDP from within Qedit
Many users have TDP/3000 and Qedit, because TDP is one of the few programs on
the HP e3000 to use the full capabilities of the 2680 Laser printers. Using the
:Tdpdraft and :Tdpfinal commands that are built into Qedit, you can use Qedit for
complete editing of your document, then print it via TDP.
Qedit as a File Utility
Qedit has numerous applications in handling of ASCII data, not just straight text.
Sorting a Range of Lines
Qedit has a command, Lsort, for sorting a range of lines.
/lsort all
/lsort 1/10
/lsortq 1/10
/lsort all key 1 10 desc
/lsort 40/last key 1 10 20 5
By default, the command uses the entire line as the sort key, sorts in ascending order,
and prints the sorted lines. Use the KEY option to specify up to four explicit sort
keys, use the DESC keyword to sort in descending order, and use LsortQ to sort
without printing.
Searching Groups of Files for Strings
You can use Qedit to search a group of files for a string; we show two very different
methods below. Note that either method can be replaced by a single MPEX
command, %QEDIT @,List "string".
FINDIT Job
The first technique is to do a :Listf into a disc file and then have Qedit convert that
disc file into a usefile of commands to be finally executed by Qedit. There are three
lines to be modified in this job. On each of these lines the key fields have been
underlined and a comment has been placed in curly braces.
86 • Common Uses of Qedit
Qedit 5.9 for HP e3000 User Manual
!job FINDIT,username.account,group {Insert USERID}
!comment *************************************************
!comment *
*
!comment * FINDIT will produce a list of occurrences of *
!comment * a given string in a given set of files in a
*
!comment * single file group (logon group).
*
!comment *
*
!comment *************************************************
!comment
!comment To use FINDIT, follow these instructions:
!comment
1. Text a copy of this sample (/Text FINDIT).
!comment
2. Change the JOB command to log on to the
!comment
group that you wish to search.
!comment
3. Change the fileset in the LISTF command if
!comment
you don't want to search the entire group.
!comment
4. Enter the string to search for between the
!comment
quote characters in the first Change command.
!comment
Change these quotes to colons if your string
!comment
contains any quotes.
!comment
5. Stream your workfile (:Stream *).
!comment
!file f=findit;temp;rec=-12,170,f,ascii;nocctl
!listf @;*f
{Insert FILESET}
!run qedit.pub.robelle
set autocont on
text findit
set length 80
dq "
" (1/8)
dq "FILENAME" (1/8)
cq 10 #"_______"# all
{Insert SEARCH STRING}
cq 1 "L " all
shut
use *
exit
!eoj
FINDIT Command File
The second technique is not so different from the first. A :Listf command is used to
generate the list of files, but instead of being a job stream, it is a command file which
can be executed from your terminal. It takes two parameters: the fileset to be be
searched, and the string for which to look. This command file uses MPE/iX syntax,
the listf mode (6), and uses I/O Redirection (> ftemp).
parm
fileset=@
anyparm
string
purge ftemp,temp
listf !fileset,6 > ftemp
/set autocont on
/text ftemp
/set length 80
/changeq 1 "$include " all
/list $include "!string"
Editing Data Files
Any external file that Qedit cannot classify as a programming language such as
COBOL is tagged either as a JOB file (80-byte records, unnumbered), or a Text file
(any record up to 8,172 bytes, numbered or not, ASCII or Binary, CCTL or not, etc.).
See the Set Keep and Set Length commands. When working with record lengths of
greater than 80 columns, you may find it easier if you set margins with Set Left and
Set Right.
Warning: If you Text and Keep a file with a record length greater than 8,172 bytes,
Qedit truncates the file to 8,172 bytes per record.
Copying and Shifting Columns
Qedit 5.9 for HP e3000 User Manual
Common Uses of Qedit • 87
To copy columns of data, use Hold plus Set Left and Set Right to save the column in
the Hold file. Then change the margins and use Replace $hold to copy the lines from
the Hold file into another column. See the Replace command for an example.
To shift columns right, use Change col " " to insert spaces in front of a column. To
shift columns left, use Change col/col "" to remove columns. To erase a column, use
Set Left x, Set Right y, and Change x/y "".
Weird Line Numbers or Losing Eight Characters
Sometimes you try to List or Text a data file, and Qedit appears to lose the last eight
characters of your record, or show you line numbers that seem crazy. The reason
may be that the data file contains digits in the last eight columns of the record, so
Qedit assumes that these digits are the record line numbers. The solution is to
remember to List or Text these files using the UNN option. For example, the file is a
list of the following ten-digit part numbers:
0004001007
0004001010
0004002059
/list thefile
4001.007 00 {The file is interpreted as a}
4001.01 00 {two-character file with}
4002.059 00 {eight-digit line numbers.}
/list thefile,unn
1
0004001007
2
0004001010
3
0004002059
CCTL Files
When you are working with CCTL disc files, remember that List prints the first
column, the one with the carriage control, as data, while ListQ sends it to MPE to
control spacing of the listing.
If you change your terminal width and want that new width to be used in the List
command (especially LISTQ of CCTL files), you must do a Set Vis Stop command
to force Qedit to re-query the terminal for its width.
When you do a List-Quiet of a CCTL file, the goal of Qedit is to reproduce as
closely as possible the result of originally directing the output to a printer instead of a
disk file. The first character in each line directs whether that line is single-space
printed, overprinted, or page-ejected.
The listing is written to a file, either QEDLIST or LP ($LP). The record width of that
file is very important. For LP, the record width comes from the device specification
of a :FILE command with a REC= parameter.
QEDLIST is a file that is opened in Qedit for the $STDLIST device. The default
record width is 80 characters. However, if you are logged on interactively, Qedit
knows that your "CRT" or Reflection may have more than 80 columns of display.
Therefore, it checks your terminal at startup and uses the CRT width at that time as
the record size for QEDLIST.
When you List a file with lines longer than the QEDLIST record size, Qedit
normally folds those lines for you. However, on a ListQ of a CCTL file, Qedit does
not do any folding. It leaves the treatment of the lines completely to the MPE file
system. MPE itself breaks up the lines in its own way if necessary, which seldom
looks the way you want for CCTL files. Therefore, if you have widened the CRT
width, you must let Qedit know about that change. You can do this with Set Vis
Stop, which forces Qedit to re-iniitalize all knowledge of the CRT on the next
88 • Common Uses of Qedit
Qedit 5.9 for HP e3000 User Manual
command. This also closes and re-opens a new QEDLIST file with the new terminal
width.
You can confirm the current CRT width by doing Verify Visual - if the CRT is open,
it will appear in a comment like this:
{Reflection=500W Col=80}
Or you can do a SHOWJCW RCRTWIDTH. Set Vis Stop will reset both values to 0
or null.
If you do List-Template, then you obviously do not want an exact reproduction of the
original report, since it did not have a template. Therefore, Template disables the
special Quiet treatment of CCTL files. Similarly, a non-quiet list also cannot look
like the original report, so the special processing is not done in that case either.
File Size
When you Text a data file into a Qedit workfile, Qedit remembers whether the
original file had space available beyond the end-of-file. If it did, when you Keep the
data file again, Qedit adjusts the limit of the new file to ensure that the same free
space still exists.
Texting a File with User Labels
When you edit a file with user labels (e.g., a PowerHouse subfile), use Text
file,Labels to retain the contents of those labels in the workfile. When you do a
Keep, Qedit writes the labels to the new file. There is no way to edit the labels, but
you can remove them by doing Keep file,Nolabels. To retain the user labels by
default, use Set Work Labels On. Many PowerHouse sites put this command in their
Qeditmgr file, since they edit PowerHouse subfiles in Qedit.
Editing Program Files
For years people have been editing binary program files with Qedit, but we have
never said whether this should work. Now Qedit recognizes that you are editing a
program file. The Text command prints a warning that you should only use the
Change, List, and Keep commands on program files. Change does not let you replace
a string with one of a different length, as this would invalidate the program file. Keep
forces the new program file to have exactly one extent.
Qedit as an Operations Tool
Qedit is handy for managing :Stream files and spool files and coping with
operational problems in general. For example, you can leave Qedit running on the
console with SPOOK and Suprtool as "suspended" son processes for dealing with
spool files and data files. While editing and launching job streams, the operator can
use List filename to examine other files and dump them to the printer.
Editing Stream Files
The Qeditscr file is just what you need for editing and launching batch jobs. You
Text a copy of the template stream into Qeditscr, fix it, then :Stream it - all within
Qedit.
Qedit 5.9 for HP e3000 User Manual
Common Uses of Qedit • 89
/text compjob.streams
QEDITSCR
33 lines in file
/modify "XXXX"
{modify parameter lines}
/stream *
{stream modified job}
When creating job streams, use Set Lang JOB and consider saving job streams as
Keep files. Qedit files can only be streamed from within Qedit, or by STREAMX
from VESOFT.
Native-Mode Output Spool Files
Since native-mode output spool files are ordinary files, they can be Listed, Texted,
and Destroyed with Qedit. To make this easier, Qedit recognizes the format #O1234
and #1234 as spool files and translates them into the proper MPE/iX file name. You
cannot Keep as a spool file, but you can do List LP to create a new spool file.
/showout sp;ready
/list #o12
/text #321
/destroy #O5678
Editing Bells, Tabs and Escapes
When using Visual mode to edit files containing Bell, Tab, Esc, many lines are
shown with a ?. This indicates that the line contains unprintable characters and
cannot be edited in Visual. Lines containing ShiftOut and Shiftin characters might be
modified because of the interaction with the terminal or terminal emulator. However,
you may specify substitute characters for use in Visual. The trick is to choose a
character that is not used for anything else (say ¤, which is typed as Extend-char-G,
or Alt-Z G using Reflection for DOS).
/set
/set
/set
/set
/set
/set
/set
vis bell "ß"
{Alt-Z S in Reflection}
decimal on; set vis bell '222 {for Qeditmgr file}
vis tab "¤"
{Alt-Z G in Reflection}
vis esc "¥"
{Alt-Z H in Reflection}
vis so "é"
vis si "ç"
decimal on; set vis esc '186 {for Qeditmgr file}
Aborting All Users to Back Up
One of the features of MPE is the ability to do automatic backups to a DAT tape in
the middle of the night without an operator. For this to work, you need to configure
your tape drive for "automatic reply", insert a tape before you leave, and :Stream
backup; AT=23:00 (i.e., 11 p.m.). This works fine, unless someone forgets to log off.
The files they have open will not be on the backup tape. Qedit can abort these users
when it is time for backup, by doing a :Showjob into a disc file and reformatting it
into a list of :Abortjob commands.
90 • Common Uses of Qedit
Qedit 5.9 for HP e3000 User Manual
!file abort,new;dev=disc;rec=-80,16,f,ascii;nocctl;temp
!setjcw cierror := 0
!continue
!showjob job=@s;*abort
!if cierror=0 then
!
file abort,oldtemp
!
run qedit.pub.robelle
text abort
dq "#S" (1/2 nomatch)
:comment To allow Operator.Sys to remain logged on:
dq "OPERATOR.SYS"
cq 9/80 "" all
cq 1 ":abortjob " all
shut
use Qeditscr
exit
!endif
!purge abort,temp
!reset abort
For this job to work, the job stream must be "allowed" to do :Abortjob. You can
either ALLOW the command to everyone (@.@), or use VESOFT's GOD program
to ALLOW this job the :Abortjob command.
Qedit 5.9 for HP e3000 User Manual
Common Uses of Qedit • 91
Qedit Commands
Introduction
Qedit operates in Line mode or Visual mode, depending upon the type of terminal.
The same commands are used in both modes. In Line mode, you do everything with
commands. In Visual mode, you do most editing with built-in functions of your
terminal, but use commands for some things. Line mode commands work in Visual
mode, and Visual mode function keys work in Line mode.
Here we describe the Qedit commands in alphabetic order. For each command, we
show both the longest and the shortest name that Qedit can recognize, as in Add [A].
Highlighted terms (e.g., linenum) and jargon words (e.g., "workfile") are defined in
the "Glossary". The Visual command is described only briefly in this section: see
the chapter "Getting A Quick Start with Full-Screen Editing" for full details.
General Notes
Here are general guidelines that apply to using the Qedit commands.
Abbreviations
Each Qedit command has a name such as List that you can abbreviate to any leading
subset. Thus, L means List. Some commands require more than one letter:
GARbage, DEStroy, RENumber, SHut, VIsual. You may append option letters to the
command: Q, T, or J. Q means "quiet", T means "template", and J means various
things, depending on the command.
list all
l @
lq
listqt
lqjt
list $
{fully spelled out}
{maximal abbreviation}
{list quietly}
{list quietly, with template}
{list quiet, jumping, with template}
{most recent external file name}
s dec on
sh
{Set Decimal command}
{Shut command}
Uppercase or Lowercase
You can enter the commands in uppercase or lowercase. These commands are
identical:
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 93
LIST ALL
list all
{uppercase}
{lowercase}
Multiple Commands per Line
You can enter several commands on a single line, if you separate them with
semicolons. The maximum command line is 256 characters, and & is not supported
for continuation. If you want to have an MPE command or a calculator command in
the stack, you should enclose it in parentheses. This prevents Qedit from passing the
rest of the line as parameters. For example,
List 5;Listspf o ;seleq=[owner=mgr.acct];List 4
List 5;(Listspf o ;seleq=[owner=mgr.acct]);List 4
{fails}
{works}
If the syntax requires semicolons and parentheses, you have to put the problematic
command in a command file, a UDC, or set it in a MPE variable and use it in the
command list instead.
Any error causes Qedit to flush the remaining commands in the line.
list 505;add *-1
shut;stream job23
{list line 505; add just before it}
When combining Qedit commands, be certain to use the same quote character in all
the commands.
Wrong:
/c7/7"DISPLAY";c\.\\
Right:
/c7/7"DISPLAY";c".""
Comments on Command Lines
You may annotate Qedit commands by putting comment text in curly braces at the
end of the line:
keep sample,yes
{update disc file}
Such comments are recognized at the "/" prompt, in usefiles, command files, and
UDCs (of course, MPE won't like them!), as well as Visual's home line and Next?
prompt and List's More? prompt. In command files and UDCs the {comment} may
appear on continuation lines, before or after the "&".
STREAMX Warning
STREAMX is a product from VESOFT that permits you to build flexible job
streams. STREAMX contains a complete programming language with loops,
prompts, and parameter substitution. A problem arises when trying to enter
comments into a Qedit batch job that will be submitted with STREAMX. Qedit uses
the {...} pair to delimit comments. STREAMX uses these same characters for
expressions.
You cannot change Qedit's comment character, but you can change the {...}
characters in STREAMX. The following example changes the STREAMX
expression characters from {...} to ~...~:
94 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
!job helpfile,user.acct
::setbraces ~~
!comment Purpose: This job stream uses the QLIB tools
!comment
Prose and Qhelp to create
!comment
a helpfile from a user manual.
!comment
!purge ~product~.help.acct
!setjcw outhelpcomp=1
!run helpcomp.qlib.robelle;parm=3
~product~.doc.acct
yes
~product~.help.acct
!release ~product~.help.acct
!run qedit.pub.robelle
open ~product~.help.acct
list .beginkey (U)
{optimizing pointers for speed}
exit
!tell ~hpjobname~,~hpuser~.~hpaccount~;Help created!
!set stdlist=delete
!eoj
Stopping Commands with Control-Y
You can stop most Line mode functions by pressing the Control-Y key. For example,
to stop an inadvertent List ALL, use Control-Y. To stop the Add, Modify, or Replace
commands, use either Control-Y or two slashes (//).
Implicit Commands
Some commands have no alphabetic name. In Line mode, pressing only Return
means display the next line and a backslash (\) means display the previous line, $
means enable Memory Lock and $- means disable Memory Lock. In either mode, ?
means Help, any line number means go to that line, a string means display the next
line with that string, and "^" means search backwards for a string:
55
find and display line 55 or higher
FIRST
find and display first line
;;;;
display the next 5 lines
\
display the previous line
-5
move current line back 5 lines
"string"
display next line with string
^"string"
display previous line with string
$
turn on memory lock at this line
$-
turn off memory lock
Function Keys
Qedit accepts the eight user function keys of HP terminals as one-keystroke
abbreviations for useful functions:
F1
Go into Visual; Update/Getnext if in Visual
F2
Roll the screen up 6 lines; browse
F3
Findup (find previous line with current string)
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 95
F4
Find (find next line with current string)
F5
Browse Backward One Page
F6
Browse Forward One Page
F7
Listredo (line) or execute ===> line (Visual)
F8
Exit from Qedit or Exit from Visual to Line mode
^1 through ^8 are another way of invoking the user function keys in Line mode.
Command Files and UDCs
Qedit executes MPE commands, UDCs (see Set UDC), and command files, whether
they start with a colon (":") or not. Your UDCs must first be activated in Qedit using
the Set UDC command.
MPE Commands
Qedit accepts most MPE commands, including Run commands, User Defined
Commands, command files, and Implied Runs, with or without the colon. You only
need the ":" if the MPE command is also a valid Qedit command (e.g., :help
requests MPE help). Beware of some unobvious Qedit commands composed of
abbreviations and options. For example, PRT is interpreted as a Qedit command
(Proc with the template option) so you must put a colon in front of it to have Qedit
execute it as a User Command. Any MPE command causes Qedit to post to the disc
all changes to your current workfile.
Examples
/listf abc.source,2
/list abc.source 5/10;listf abc.source,1
/fcopy from=abc.source;to=
/:showtime
/showjob
/file bobtape;dev=tape
/stream abc12.compile
{stream Qedit files, *}
/showcatalog
{see Set UDC command}
/:help listf
{colon is recommended}
/:help udcname
{see set UDC}
/compile *
{Set Lang decides compiler}
/cobol abc.source,,lp
/prep $oldpass,abc12.prog;pmap
/run abc12.prog;lib=g
/dbutil
{implied Run dbutil.pub.sys}
/segmenter
/display Print this message on the screen.
/pause Press Return when ready to continue:
/tdpdraft *
{invoke Scribe on Qedit file}
/reflect dir
{Reflection PC command}
/qhelp qlib.help.robelle {get Robelle Help}
Differences from MPE
The Break key will not stop Qedit in the middle of a long :Listf or other command.
You may want to use :Break and :Resume to do a long :Listf. Control-Y sometimes
stops a :Listf on certain versions of MPE/iX, but generally Control-Y doesn't stop
most commands. Control-Y does stop a compile if the compiler has been "fixed" to
use our interface routines to read Qedit source files. The Qedit syntax for Prep and
Run is more forgiving than in MPE; you can abbreviate the keywords, leave out the
96 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
commas, and use default parameter values. Qedit adds a number of new commands
that MPE forgot -- Reflect, Display, Pause, Activate, Kill.
Unlike Qedit commands, MPE commands cannot normally be shortened, and only
one may be entered per command line. You will find MPE commands handy to
check files (listf), to check users (showjob), to redirect files (file lp =
$stdlist), to compile without leaving Qedit, to :Prep (or :Link on MPE/iX), and
to :Run programs:
/listf
/file lp;dev=serialp
/cobol *,,lp
/prep
/run
{$oldpass to $newpass by default}
{defaults to $oldpass}
Calculator Commands
Any command that begins with an equal sign (=) is treated as a calculator expression.
This feature can be used to compute temporary values and do conversions from one
number base to another.
=64,O
Result= %000100
QEDITCOUNT JCW
Qedit has a JCW (like a variable) that keeps track of how many lines were processed
by the last command: QEDITCOUNT. This JCW is updated after those commands
that can print a total: List, Delete, Add-file, Add-move, Add-copy, Append, Change,
Divide, Glue, Justify, Keep, Merge, Proc, and Text. The line count is truncated at
32,000.
/deleteq "$page"
29 lines DELETED!
/showjcw qeditcount
QEDITCOUNT = 29
QEDCURWFILE Variable
Qedit updates a variable, QEDCURWFILE, with the name of your current or last
workfile. The name in this variable is the same as the name substituted when you use
"*" as a parameter in a User Command. This gives you the ability to reference the
current workfile easily from within a User Command without having to pass it in as a
parameter.
External Program Commands
If you define an external program such as MPEX with the Set Extprog command,
you can then send it commands by prefixing them with a percent sign (%). When the
external command completes, you return to Qedit.
/set extprog main.pub.vesoft
/%!altfile @.@;squeeze;extents=1
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 97
:Activate Command [AC/:A]
Awakens one of the programs that you have held in Qedit. See also Kill.
:ACTIVATE [ progname [,entrypoint] ]
(Defaults: most recently used)
The progname must be the name of a program file that you ran within Qedit, that
suspended on exit, and that you held. The default is the program most-recently used.
You need not spell out the entire program file; you may shorten the name to any
substring. Use Verify Run to see what programs are ready to be activated.
Examples
/run suprtool.pub.robelle
>base xx;get yy;list;xeq {do Suprtool task}
>exit
{return to Qedit}
End Run
SUPRTOOL is still alive. Okay to HOLD onto it [no]?yes
/list all...
{continue editing}
/ac supr
{activate Suprtool}
SUPRTOOL.PUB.ROBELLE
>get zz;list;xeq
>exit
Program Held. Use :Activate/:Run to rerun.
98 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Add Command [A]
Adds lines into the workfile. There are five varieties of Add that cover all the ways
you can add lines into a Qedit workfile:
NEW
Add new lines to your workfile from Stdin.
STRING
Add a new line from the command prompt.
COPY
Copy lines from one place to another.
MOVE
Move lines from one place to another.
FILE
Bring lines in from an external file.
Add (Adding New Lines)
Add some new lines from the terminal keyboard. Insert them at a given line number
or after it.
ADD [ linenum ]
(Q=no linenums, J=justified, T=template)
(Default: linenum = *)
The linenum parameter specifies where to add new lines and also determines the
increment between new lines. If linenum is 9.1, lines will be incremented by 0.1; if
9.01, then 0.01. If linenum already exists, Qedit increments it and begins adding after
the existing line. If linenum is 0, Qedit adds new lines before the first existing line in
the file. If you don't say which linenum, Add inserts the lines after the current
position (*). (See Miscellaneous Points below.)
Examples
/add 5
5.1
5.2
5.3
line a
line b
//
/aq
This is new text
//
{add new lines after line 5}
{Qedit prompts with line number}
{you enter line of text and Return}
{you enter // or Control-Y to stop}
{add after * line; no prompt}
{end the Add command}
Temporary Workfile: Qeditscr
If you do not have a named workfile Open when you Add, Qedit automatically
builds a temporary workfile for you. This file is named Qeditscr (or Qednnnnn if you
have Set Work Random On), and it is job temporary, meaning it goes away when
you log off the computer. Therefore, you should convert it into a permanent Qedit
workfile by doing Shut filename or into a permanent Editor-style file by doing Keep
filename.
Making Qeditscr Permanent
Do you access Qedit over a telephone line? Have you ever been disconnected by
noise on the line? If so, you probably know that Qeditscr is a job temporary file.
When your session is lost, so is your editing work. Of course, if you were editing a
named Qedit file that you Opened, you would not lose anything.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 99
Qeditscr can easily be converted into a permanent file so that it will not be lost on
:BYE. However, if two people share the same logon group, the Qeditscr file cannot
be permanent for both of them! Here are the commands to create a permanent scratch
file for yourself:
/:purge qeditscr,temp
/set work size 3200
/open
/shut
/:save qeditscr
{purge existing file}
{ensure file is big enough}
{creates new Qeditscr}
{make permanent}
Another way of using permanent scratch files is to pass a file name for Qedit to edit,
or to use Set Work Random On. See the "Running Qedit Under MPE" chapter for
more information.
Using the Tab Key
By default, Qedit defines tabs every 10 columns across the line (every 8 for
Qedit/UX). You can override these default tab stops using Set Tabs Stop n (every 2
to 15 characters) or Set Tabs 5 10 22 28 ... for completely custom tab stops. When
you press the tab key as you Add lines, Qedit correctly inserts spaces in your lines
and skip to the correct column on your screen (assuming you are using an HP
terminal).
Overflowing Lines or Line Numbers
The Add command continues prompting until you press Control-Y, or you type "//"
at the end of a line, or you run out of line numbers. When you exhaust the line
numbers possible between two lines, Qedit prints "Error: Already". You can continue
by doing a range Renumber on the area where you wish to add more lines. Thus, if
your last line added was 4.999, use Renum 4/5 to spread out the lines between 4 and
5.
You can configure Qedit to automatically renumber part of the file so that you do not
have to renumber it manually. See the Set Visual Renum option.
Line Wraparound
If you enter a line that is too long, Qedit divides it into several lines. Set Wraparound
ON divides lines on "word" boundaries only. Any words that will not fit on the
current line are moved to the next line. If only a small number of words are moved to
the next line, Qedit prompts you to complete the line. To end the Add when this
happens, press Return before typing "//". If you are editing FORTRAN source code,
Qedit generates a valid continuation line for you.
Automatically Indenting Lines
AJ for justified is a special option to indent new lines. The linenum you specify must
be an existing line. You enter new lines beneath it. Qedit will then indent the new
lines by exactly the same number of spaces as the existing line. You can shift the
indentation left by typing {'s at the start of a line, or shift it right with }'s. To redefine
the { and } characters, use Set Zip.
Modifying a Line During Add
When you know you made a typo, and prefer to fix it now instead of going on, the
auto-modify character will help you. Enter the command Set Zip []@{}#, or better
yet, put it in your Qeditmgr configuration file. The # character (or other special
character of your choice) is called the auto-modify character. It allows you to modify
the line you are currently entering. Type "#" at the end of the line, and Qedit
redisplays the line for you to modify. When you are done with the Modify, you press
Return to continue adding new lines.
Miscellaneous Points to Note
100 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
If you have Set Left/Right margins, the new lines added will have spaces to the left
and right of the margins. That is, the line you enter will be left-justified within the
current margins of the workfile.
The maximum default increment between new lines is 1.0 (or 0.1 for standard
COBOL files). You can change this default with Set Increment.
You can ask Qedit to remove nonprinting characters from your input lines using Set
Editinput Data ON. If you do not wish to allow the extended Roman-8 characters,
use Set Editinput Data ON Extend OFF.
Add (Adding a String as a Line)
Add one new line, with the text coming from a string in the command itself. This is
handy when you need some literal text within a User Command or Use file, but don't
want to create a temporary file to hold it.
ADD linenum string
(Q=no linenums, J=justified, T=template)
(Default: linenum = *)
The linenum parameter specifies where to insert the new line containing the string.
Examples
/add 5 "new line"
5.1
new line
/add 10.01 "change datasetdata setall"
10.01
change datasetdata setall
Add (Copying Lines within a File)
Add lines by copying duplicates of existing lines.
ADD linenum = rangelist
(Q=no display)
(Defaults: none)
The linenum parameter tells Qedit where to insert the copied lines. The number of
decimal places in linenum tells Qedit how finely to number the new lines:
/add 50 = 1/9
/add 50.10=1/9
{new lines will be 50.1, 50.2, 50.3...}
{new lines will be 50.10, 50.11, 50.12...}
The rangelist parameter tells Qedit which lines to copy:
/add 50.1 = 1/9 10/15 {'1/9 10/15' is the rangelist}
Examples
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 101
/list 4/8
4
aaaaaaaa
5
bbbbbbbb
6
cccccccc
7
dddddddd
8
eeeeeeee
/add 5 = 7/8
5.1
dddddddd
5.2
eeeeeeee
2 lines COPIED
/list 4/8
4
aaaaaaaa
5
bbbbbbbb
5.1
dddddddd
5.2
eeeeeeee
6
cccccccc
7
dddddddd
8
eeeeeeee
{how lines look before the copy command}
/aq 5 = 5
{duplicate line 5 after itself}
{copy lines 7 and 8 after line 5}
{how lines look after the copy command}
Notes
Add prints each new line, unless you use AQ. When you copy lines, the rangelist
must not include the linenum (e.g., /Add 5 = 4/6 is rejected because it would be an
infinite loop). Qedit prints "Error: Already". The lines copied are not deleted from
the original location. You now have two copies of the lines (and a copy in the Hold0
file, see Add-Move). Add-Copy is like the Copy command of EDIT/3000.
If you have Set Left/Right margins, Qedit prints only the portion of each line within
the margins. However, it will actually copy the entire line, including the portion
outside of the current margins.
Add (Moving Lines within a File)
Move some lines from one place in the file to another, deleting them from the
original position.
ADD linenum < rangelist
(Q=no display)
(Defaults: none)
The linenum tells Qedit where to move the lines. The number of decimal places in
linenum determines the line number increment. For example, "/add 5.10<100/200"
creates lines 5.10, 5.11, 5.12, etc.
The rangelist tells Qedit which lines to move. Add deletes the original lines after
moving them. You still only have one copy of each line.
Examples
102 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/list 4/7
{how lines look before the move}
4
aaaaaaaa
5
bbbbbbbb
6
dddddddd
7
cccccccc
/add 5 < 7
{move line 7 after line 5}
5.1
cccccccc
1 line MOVED
/list 4/7
4
5
5.1
6
{how lines look after the move}
aaaaaaaa
bbbbbbbb
cccccccc
dddddddd
Notes
Control-Y during a move stops the move, but it also changes the move into a copy.
The lines being moved in the current range are not deleted.
Add-Move ignores Set LEFT/RIGHT margins; it moves entire lines. However, it
only prints the portion of the line within the current margins.
Add-Move is like the Gather command in EDIT/3000.
When you copy or move lines using Add= or Add<, Qedit first puts the lines into a
"Hold" file called Hold0. It then counts the lines. If you do not have sufficient line
numbers to insert the new lines, Qedit stops and prints "Error: Already". Use Renum
to renumber the range of line numbers and then copy the lines from the Hold0 file.
See also the Hold command.
/list hold0
/add 55=hold0
{add from Hold file}
Add (Copying Lines Between Files)
Add lines to the workfile from an external file.
ADD linenum = filename [,UNN] [ rangelist ]
(Q=no display)
(Default: entire file)
The linenum tells Qedit where to begin adding the lines from the external file.
The filename tells Qedit which file to copy from. It can be any type of disc file. If
any of the lines are too long, they will be truncated with a warning. Use
filename,UNN when you are adding from a data file with numeric characters in the
last eight columns which are not really sequence numbers.
The rangelist tells Qedit how much of the file to copy. The default is to copy the
entire file. If the external file does not have sequence numbers, Qedit assumes that
the file is numbered from 1 by the current Set Increment. When you specify a
rangelist, Add leaves a copy of the lines from the external file in the Hold0 file, as
well as in your workfile.
Examples
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 103
/add 500.01 = abc
500.001 abc line-1
500.002 abc line-2
{copy in the file ABC after 500.01}
{prints each line copied from file}
{prints new line numbers too}
/aq 5 = xyz 5/10
{copy in lines 5/10 of the file XYZ}
/l template "$page"(up) {list page breaks in a file}
1
$PAGE "xx"
{select the template you want}
24
$PAGE "yy"
37
$PAGE "zz"
/add 5=template 24/36
{copy the lines between $pages}
/shut longname.to.type
/new cust
/a 1 = $ 50/60
{establishing "previous" file}
{open another file}
{$ stands for longname.to.type}
Notes
Add prints each line as it copies it, unless you use AQ. If Qedit finds invalid
sequence numbers in a file, it begins assigning "logical" sequence numbers using the
last valid sequence number and the current Set Increment.
If you have Set Left/Right margins, Qedit inserts blanks before the left margin in
each line. That is, the lines from the external file are left-justified within the current
margins of the workfile.
Add from a file is like the Join command in EDIT/3000.
104 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Append Command [AP]
Appends a string to the end of each line in the rangelist.
APPEND "string" [ rangelist ]
(Q=no display)
(Default: rangelist = *)
Append allows you to add a semi-colon (or any other string of characters) to the end
of a line (/AP ";" 5/10). Append prints each line that it changes. If the resulting line
would be too long, Append goes into Modify on that line.
Examples
/list 25
25
to
/append "!"
25
to
/ap ")" 1/4
1
2
3
4
Qedit 5.9 for HP e3000 User Manual
the end of the line
the end of the line!
(redo function)
(modify function)
(append function)
(list function)
Qedit Commands • 105
Backward Command [BA/F5]
Starts "browsing" the current file by displaying one page "backward". You stay in
"browse" mode until you enter any command (see List, jumping option).
BACKWARD
(F5 key does the same)
In Line mode, Backward and Forward (or F5/F6) throw you into List-Jumping's
browse-mode. Qedit displays a screen of text, where the screen size is either 23 lines
or what you specify with Set List LJ, then waits for you by asking "More?". Press
Return to see the next screen. Typing a line number moves you to the screen starting
at that line, pressing F2-F6 does the appropriate action, and F8 or "//" or Control-Y
or typing any command gets you out of browse-mode. At the "More" prompt, the *
"current" line is the last line displayed.
106 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Before Command [B]
Repeat any combination of the previous 1,000 command lines, with or without
editing.
BEFORE
[ start [ / stop ] ]
[ string ]
[ ALL | @ ]
(Default: redo previous line)
(BQ=redo without change)
(BJ=listredo)
The Before command allows you to modify the commands before it executes them.
If you don't need to change them, use BQ or :Do. Commands are numbered
sequentially, starting with 1 for the first command entered and, by default, the last
1,000 commands are accessible. This numbering sequence applies only to the
temporary redo stack, because this stack is discarded when you exit Qedit. The
numbering sequence in a persistent redo stack, which is accessible across Qedit
invocations, continues between invocations. Use the :Listredo or BJ command to
display the previous commands. You can redo a single command, a range of
commands, or the most recent command whose name matches a string.
The Before command uses Qedit-style Control characters for modifying the
commands. The default mode is to replace characters. To delete use Control-D, and
to insert use Control-B. If you prefer HP-style modify (D, R, I, and U), use the :Redo
command instead of Before, or do Set Modify HP.
Examples
/listf @.soruce
NON-EXISTENT GROUP.
/Before
listf @.soruce
our
listf @.source
you press Return}
/listredo -10/
/before 5
/bef 8/10
/b listf
/b listftemp
/b @temp
/before –2
/before -5/-2
{"source" is not spelled right}
(CIERR 908)
{redo most recent command}
{last command is printed}
{you enter changes to it}
{the edited command is shown}
{show
{redo
{redo
{redo
{redo
{redo
{redo
{redo
last 10 commands}
5th command in stack}
8th through 10th}
last Listf command}
"listftemp" command}
last containing "temp"}
command before previous}
by relative lines}
Notes
If you wish to change any characters within the line, the modify operators are the
regular Control Codes used in Qedit:
Any printing characters replace the ones above.
Control-D plus spaces deletes columns above.
Control-B puts you into "insert before" mode.
Control-A starts appending characters at the end of line.
Control-A, Control-D, plus spaces, deletes from the end.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 107
Control-T ends Insert Mode, allowing movement to a new column.
Control-G recovers the original line.
Control-O specifies "overwrite" mode (needed for spaces).
To save more commands, use a :File command on the file Qedredo before running
Qedit:
:file qedredo;disc=5000
:run qedit.pub.robelle
108 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Beginfile and :Endfile Commands
Qedit allows you to build and fill MPE files in UDCs and usefiles:
:BEGINFILE filename
: data records
:ENDFILE
The :Beginfile command opens a new temporary file with 256-byte records. :File
equations are allowed to override the format of the file. Qedit writes all of the data
records between the :Beginfile and the :Endfile into this new file. Each data record
must have a colon at the start, but the colon is not written to the temporary file. Also
note that Qedit removes all leading spaces between the colon and the first character
on the line. The :Endfile command closes the file as a temporary file. If the session
already has a file with the same name, Endfile asks the user if he wishes to purge the
existing file or rename the new one. If you don't want the end-user to go through this
dialogue, you should :Purge the existing file before the :Beginfile.
Examples
You can use this file as input to programs, using a :File command and/or the Stdin
parameter of Run:
:purge basename,temp
:beginfile basename
:menu
:endfile
:file inname=basename,oldtemp
:run dbutil.pub.sys,create;stdin=*inname
:reset inname
:purge basename,temp
Notes
A useful application of :Beginfile is to create command files in job streams.
However, when creating a file with :Beginfile in a job stream, be certain that each
data line starts with a colon (:). Otherwise, Qedit thinks that those are Qedit
commands and it attempts to execute them.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 109
Change Command [C]
Changes one string or column range to another string in some or all of your lines.
There are two basic varieties of Change:
STRINGS
replace one string with another
COLUMNS
replace a column range with a string
Change (Changing Strings)
Replaces one string of characters by another string, the two strings being separated
by a single quote character.
CHANGE "string1"string2" [ rangelist ]
(Q=no display, J=verify, T=CobX Tag)
(Default: rangelist = *)
The string1 tells Change what string of characters to find. The default for string1 is
the last string used, and you specify this default via the null string (e.g., change
""xxx"). The null string recalls the last string and the window used with it. If the
target string1 occurs more than once in a line, Qedit changes every occurrence.
The string2 tells Change what characters to substitute. In this format of the Change
command, only three quote characters are used to define the two strings, not four as
you would normally expect. Another oddity is that string2 does not become the
current string. This is so that you can do another Change or Find command using ""
as the target (i.e., the last string), finding and fixing multiple occurrences of the same
string (e.g., find "nad"; CH ""and"; F; CH ""and"; ...). The third
difference of string2 is that a null string for this parameter actually means "null".
change "very"" 100 means remove "very" from line 100.
The rangelist tells Change what lines to search for string1. The default rangelist is
the current line only.
If string2 is shorter than string1 (e.g., change "Robert"Bob"), Qedit shortens
the line by shifting the rest of the line left. If string2 is longer (e.g., change
"Bob"Robert"), Qedit lengthens the line by shifting characters right. If string2 is
so much longer that the line would be too long, Qedit sends you into the Modify
command to fix the line by hand.
Change prints each line that it updates, unless you use CQ.
Examples
110 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/list 55
{display line with mistake}
55
select lines contaning both of two
/change "contan"contain" {change string in current line}
55
select lines containing both of two
/change "sub"subindex" all
{make a global change}
10
subindex = subindex + 1
11
table(subindex) = 0
213
if subindexway = 0 {oops-bad change!}
/cj "cust"Customer" 200/300
{change with user approval}
225
Display Customer
{shown for approval}
Change okay (Y,N,or Modify) [No]: yes
/list 9
{display line
9
The test results were
/c "very""
{remove word,
9
The test results were
to review}
very exciting.
change to null string}
exciting.
/find "wiith"
{search forward for line with error}
99
the string is combined wiith the second string
/c ""with"
{change "wiith" to "with"}
99
the string is combined with the second string
Using Alternates to Quote
You may select your own quote character if you find " too much work because it is a
shifted key. Among the alternatives are \ : and ' (apostrophe). See the "Glossary" for
more on strings and other alternates to quotes.
/c :wiith:with:
/c \wiith\with\
Approving Each Changed Line
Use CJ to give yourself approval over each change before it is updated. With CJ,
Qedit displays the line as it would be and asks you for a Yes, No, or Modify answer.
Use CJ when you have trouble working out the precise strings to change.
Searching for Two Strings at Once
Because the rangelist can contain a search string, you can actually select lines
containing both of two strings:
/c "xxx"filename" all
/c "xxx"filename" "rename"
{"xxx" becomes "filename" in ALL}
{line must contain "rename" too}
Including a Window
The form of Change command just described requires only three quotes per
command, but does not allow all options. You cannot specify a special window - you
will always use the default Set Window value. To do a Change with a special
window, you must specify four quote characters, two for each string:
CHANGE "string1" (window) "string2" [ rangelist ]
Each string is delimited by two quote characters and the two strings must be
separated by a space or a comma. Between the two strings you may insert a window
such as (SMART) or (20/30) or (UPSHIFT).
Changing Within a Column Range
If you insert a column window, Qedit changes only the columns within the window.
Columns outside the window are untouched:
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 111
/change "CUSTREC" (10/39) "CUSTOMER-RECORD"
In this example, "CUSTREC" is expanded to "CUSTOMER-RECORD", but the data
at column 40 and beyond is not moved. In addition, the Change must not cause the
rest of the window to overflow.
Changing Uppercase and Lowercase
If you specify an upshift window, Qedit ignores the case of letters when matching
the target string. It will match words that are spelled with caps or without:
/change "JONES" (upshift) "Fitz-Jones" all
In this example, Change selects lines containing "JONES", "Jones", or even "joneS".
Avoiding Changes to Embedded Words
If you specify a Smart window, Qedit rejects those matches in which the target string
is actually in the middle of another word:
/change "FRANK" (smart) "Frank" all
This example selects "FRANK", but reject "FRANKLYN." You can combine Smart
and Upshift.
Patterns and Windows
In other commands the window can specify a pattern to match. In the Change
command patterns are not allowed, because Change cannot perform pattern changes.
However, a string specified in the rangelist portion of the Change command may be
a pattern. For example:
/change "CUSTREC" "CUST-REC" "@01@PIC@" (pattern)
{change custrec to cust-rec in all lines that}
{
also contain "01" and "PIC" in that order}
CobX Tags
Cobol tags are short strings stored in columns 73 to 80 of CobX source files. The
Cobol tag value is defined using the Set X command. Once enabled, updated lines
and added lines are automatically updated with the tag. They can also be modified
manually with custom tag values.
In its regular form, the Change command affects only the text area in columns 7 to
72. If you wish to make changes to Cobol tags, use the T suffix. You can think of it
as the Tag option. This option operates only on the tag area itself, columns 73 to
80.
/change "CUST" "SUPP" all
{change cust to supp in all lines.
}
{ cust must be between columns 7 and 72. }
/changeT "CUST" "SUPP" all
{change cust to supp in all lines.
}
{ cust must be between columns 73 and 80. }
To to this, the Tag option temporarily changes the margins to (73/80). Qedit
displays a warning every time this option is used. Because the margin values have
changed, explicit column range in a Window can only be between 73 and 80.
112 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/changeT "CUST" (50/60) "SUPP"
Warning: ChangeT: editing the
Error: Window
/changeT "CUST" (73/80) "SUPP"
Warning: ChangeT: editing the
10
SUPP0102
1 line changed
all
Cobol tag area only (73-80).
all
Cobol tag area only (73-80).
Because the margins have been changed, Qedit displays text in the tag area only
except when the Justify option is used. In this case, Qedit prompts for confirmation
before making the change. It would be hard to determine if a line needs to be
changed based only on the tag value. So, when the Justify option is used, Qedit
displays the complete line. The user has the option to accept the changes, reject the
changes or manually modify the line. If the user chooses to modify the line, only the
tag is displayed.
Change (Changing Columns)
Replace some columns in some lines with a new string of characters. Use Change to
insert columns, shift text left, or shift text right.
CHANGE column [/column] [(window)] "string" [rangelist]
(Q=no display, J=verify)
(Default: rangelist = *)
Change replaces the target column range with the string in the lines of the rangelist.
You can use this to insert a string at a specified column. You can also use it to
replace, expand, or contract specified columns.
If you specify a single column instead of a range, Qedit inserts the string before that
column and shifts the rest of the line to the right. You can create new columns by
inserting blanks in front of a position (e.g., change 5 " ").
If you specify a range of columns, Qedit replaces that column range with the string.
The string may be the same length as the column range, longer, or shorter. If the
string is shorter than the column range deleted, the rest of the line shifts left. If
longer, the rest of the line shifts right. You can remove columns entirely by changing
them to a null string (e.g., change 5/7 "").
Examples
/change 5"|"all
/cq 1/2 "" 10/15
{draw vertical line of "|"s in file}
{shift lines 10/15 left 2 spaces}
/cq 1 "
{shift lines 10/15 right 3 spaces}
" 10/15
/cq 1(1/8)" " all
{shift columns 1/8 right 1 space}
{don't change text beyond column 8}
/change 12/12 ::
{delete column 12 in the current line}
Notes
See the discussion of windows under "Changing Strings". Those notes also apply to
column changes.
The first column number is usually 1,except for standard COBOL source files, where
it is 7 (seven). The last column number depends on the current values for Set
Language, Set Length, and Set Right. See the COBOL section in the chapter "Using
Qedit with MPE Programming Tools."
Change prints each line modified, unless you use CQ. CJ asks you to verify each
change.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 113
Close Command [CL]
Shut the current work file and remove it from the recently accessed file list.
CLose
(Default: none)
The Shut command is the normal way to close a workfile. When you Shut a file (or
Open another one), Qedit remembers the name of the current workfile in a list of
recently accessed files. This allows you to reopen the file using open ?. However,
the list is of limited size. If you are not coming back to edit the current file again, use
the Close command instead of Shut. This keeps other file names from falling off the
bottom of the list.
Examples
/open abc
/open def
/close
/open *
114 • Qedit Commands
{close "def" and forget it}
{current file is now "abc"}
Qedit 5.9 for HP e3000 User Manual
Colcopy Command [COL]
Copies one or more columns to a different location on the same line.
COLCOPY source [ /source2 ] destination1 [ /destination2 ] [ rangelist ]
(Q=no display, J=verify, T=CobX Tag)
(Default: rangelist = *)
Colcopy copies text in columns specified by source1 and source2 to the destination
columns specified by destination1 and destination2 in the lines of rangelist. Even
though Colcopy can modify multiple lines using a rangelist, it really operates on one
line at a time. You can not copy columns from one line to another.
Source and destination columns always represent the original location. All changes
are based on that assumption.
If source1 only is specified, Qedit copies just that column (length of 1). If
destination1 only is specified, the source columns are inserted at that location. If you
wish to replace a single column, enter a destination range where destination1 and
Destination2 are the same e.g. Colcopy 1 10/10.
/list 1
1
abcdefghijklmnopqrstuvwxyz
/colcopy 1 10
{ insert column 1 at column 10 }
1
abcdefghiajklmnopqrstuvwxyz
1 line changed
/colcopy 1/5 10
{ insert columns 1/5 at column 10 }
1
abcdefghiabcdejklmnopqrstuvwxyz
1 line changed
If destination1 and destination2 are specified, text in these columns is replaced by
the source text. If the source text is narrower or wider, the line is shortened or
expanded as needed.
/colcopy 1 10/15
{ copy column 1 to columns 10/15 }
1
abcdefghiapqrstuvwxyz
1 line changed
/colcopy 1/5 10/11
{ copy columns 1/5 to 10/11. Line expands. }
1
abcdefghiabcdelmnopqrstuvwxyz
1 line changed
/colcopy 1/5 10/20
{ copy columns 1/5 to 10/20. Line shortens. }
1
abcdefghiabcdeuvwxyz
1 line changed
Trailing Spaces
Trailing spaces on the line are not significant. This means that a line can expand until
a non-space character reaches the current right margin (Set Right). However,
trailing spaces from the source text are significant and are copied in the operation.
If the line can not be expanded further, Qedit displays a warning message and allows
the user to modify it.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 115
/list 2
2
abcd
/colcopy 1/8 20
1
abcd
1 line changed
/Set right 30
/colcopy 1/5 30
efghiabcdeuvwxyz
{ insert columns 1/8 at 20 }
efghiabcdeabcd
uvwxyz
{ insert columns 1/5 at 30 }
Warning: Source columns could not be inserted. Please modify. (Warning
2)
1
abcd
efghiabcdeabcd
uvwxyz
1 line modified
Overlapping Columns
When source and destination columns do not overlap, the results are straightforward.
If source and destination columns overlap partially or completely, the results might
not be as expected. Keep in mind that:
•
source and destination columns are always based on the original line
•
the destination columns are removed
•
the source columns are put in their place
Approving Each Changed Line
Use COLJ to give yourself approval over each change before it is updated. With
COLJ, Qedit displays the line as it would be and asks you for a Yes, No, or Modify
answer.
CobX Tags
Cobol tags are short strings stored in columns 73 to 80 of CobX source files. The
Cobol tag value is defined using the Set X command. Once enabled, updated lines
and added lines are automatically updated with the tag. They can also be modified
manually with custom tag values.
In its regular form, the Colcopy command affects only the text area in columns 7 to
72. If you wish to make changes to Cobol tags, use the T suffix. You can think of it
as the Tag option. This option operates only on the tag area itself, columns 73 to 80.
/ColT 73/74 79/80 all
/ColT 73/74 75 all
{
{
{
{
copies content of columns 73 and 74 }
into columns 79/80
}
inserts content of columns 73 and 74
}
in column 75. Columns 76-80 are shifted. }
To to this, the Tag option temporarily changes the margins to (73/80). Qedit
displays a warning every time this option is used. Because the margin values have
changed, explicit column range in the source and destination columns can only be
between 73 and 80.
/ColT 23/24 79/80 all
Warning: ColcopyT: editing the Cobol tag area only (73-80).
Error: The Sourcestart column (23) is not between 73 and 80
/ColT 73/74 79/80 10
Warning: ColcopyT: editing the Cobol tag area only (73-80).
10
ME0307ME
1 line changed
Because the margins have been changed, Qedit displays text in the tag area only
except when the Justify option is used. In this case, Qedit prompts for confirmation
before making the change. It would be hard to determine if a line needs to be
changed based only on the tag value. So, when the Justify option is used, Qedit
displays the complete line. The user has the option to accept the changes, reject the
116 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
changes or manually modify the line. If the user chooses to modify the line, only the
tag is displayed.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 117
Colmove Command [COLM]
Moves one or more columns to a different location on the same line.
COLMOVE source [ /source2 ] destination1 [ /destination2 ] [ rangelist ]
(Q=no display, J=verify, T=CobX Tag)
(Default: rangelist = *)
Colmove moves text in columns specified by source1 and source2 to the destination
columns specified by destination1 and destination2 in the lines of rangelist. The
source columns are removed from their original location. Even though Colmove can
modify multiple lines using a rangelist, it really operates on one line at a time.
You can not move columns from one line to another. Source and destination columns
always represent the original location. All changes are based on that assumption.
If source1 only is specified, Qedit moves just that column (length of 1). If
destination1 only is specified, the source columns are inserted at that location. If
you wish to replace a single column, enter a destination range where destination1
and Destination2 are the same e.g. Colcopy 1 10/10. A move means the
original columns are removed and the line is shifted left. Then the source text is
inserted at the destination.
/list 1
1
abcdefghijklmnopqrstuvwxyz
/colmove 1 10
{ move column 1 to column 10 }
1
bcdefghiajklmnopqrstuvwxyz
1 line changed
/colmove 1/5 10
{ move columns 1/5 to column 10 }
1
fghiabcdejklmnopqrstuvwxyz
1 line changed
If destination1 and destination2 are specified, text in these columns is replaced by
the source text. If the source text is narrower or wider, the line is shortened or
expanded as needed.
/colmove 1 10/15
{ move column 1 to columns 10/15 }
1
bcdefghiapqrstuvwxyz
1 line changed
/colmove 1/5 10/11
{ move columns 1/5 to 10/11 }
1
fghiabcdelmnopqrstuvwxyz
1 line changed
/colmove 1/5 10/20
{ move columns 1/5 to 10/20 }
1
fghiabcdeuvwxyz
1 line changed
Trailing Spaces
Trailing spaces on the line are not significant. This means that a line can expand until
a non-space character reaches the current right margin (Set Right). However,
trailing spaces from the source text are significant and are moved in the operation.
/list 2
2
abcd
efghiabcdeuvwxyz
/colmove 1/8 20
{ move columns 1/8 to 20 }
1
efghiabcdeabcd
uvwxyz
1 line changed
Overlapping Columns
118 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
When source and destination columns do not overlap, the results are straightforward.
If source and destination columns overlap partially or completely, the results might
not be as expected. Keep in mind that:
•
source and destination columns are always based on the original line
•
the source columns are removed
•
the destination columns are removed
•
the source columns are put in their place
Here is an example:
/list 1
1
abcdefghijklmnopqrstuvwxyz
/colm 6/20 15
1
abcdefghijklmnopqrstuvwxyz
1 line changed
Apparently, nothing has changed but, in fact, something did happen to the line. Qedit
removed the source columns "fghijklmnopqrst" and tried to insert the original text
where column 15 used to be. Column 15 was part of the area that has been removed
so Qedit inserts the text where it should have been i.e. between "e" and "u". So, it's
putting the original text back where it was.
Moving Passed the Right Margin
Destination columns can exceed the current right margin. In this case, Qedit assumes
the columns should be moved to the end of the line. Effectively, the source columns
are inserted in the rightmost columns of the line. The destination columns do not
have to be a precise value. They just need to be larger than the current right margin.
If the right margin is currently set at 80, the following commands yield the same
results.
/v right
Set Right 50
/lt2
....+....10...+....20...+....30...+....40...+....5
2
abcdefghijklmnopqrstuvwxyz
/colm 1/5 51
2
fghijklmnopqrstuvwxyz
abcde
1 line changed
/colm 1/5 88/90
2
fghijklmnopqrstuvwxyz
abcde
1 line changed
Approving Each Changed Line
Use COLMJ to give yourself approval over each change before it is updated. With
COLMJ, Qedit displays the line as it would be and asks you for a Yes, No, or
Modify answer.
CobX Tags
Cobol tags are short strings stored in columns 73 to 80 of CobX source files. The
Cobol tag value is defined using the Set X command. Once enabled, updated lines
and added lines are automatically updated with the tag. They can also be modified
manually with custom tag values.
In its regular form, the Colmove command affects only the text area in columns 7 to
72.If you wish to make changes to Cobol tags, use the T suffix. You can think of it as
the Tag option. This option operates only on the tag area itself, columns 73 to 80.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 119
/ColmT 73/74 79/80 all
/ColmT 73/74 75 all
{
{
{
{
copies content of columns 73 and 74 }
into columns 79/80
}
inserts content of columns 73 and 74
}
in column 75. Columns 76-80 are shifted. }
To to this, the Tag option temporarily changes the margins to (73/80). Qedit
displays a warning every time this option is used. Because the margin values have
changed, explicit column range in the source and destination columns can only be
between 73 and 80.
/ColmoveT 23/24 79/80 all
Warning: ColcopyT: editing the Cobol tag area only (73-80).
Error: The Sourcestart column (23) is not between 73 and 80
/ColmoveT 73/74 79/80 10
Warning: ColcopyT: editing the Cobol tag area only (73-80).
10
ME0307ME
1 line changed
Because the margins have been changed, Qedit displays text in the tag area only
except when the Justify option is used. In this case, Qedit prompts for confirmation
before making the change. It would be hard to determine if a line needs to be
changed based only on the tag value. So, when the Justify option is used, Qedit
displays the complete line. The user has the option to accept the changes, reject the
changes or manually modify the line. If the user chooses to modify the line, only the
tag is displayed.
120 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Compile Command [CO/:C]
Qedit supports many commands for compiling using MPE V or CM compilers: three
for COBOL, two for FORTRAN, SPL, Pascal, and RPG. To select a default CM
COBOL compiler, use Set Whichcomp. Qedit provides a generic :Compile command
that uses Set Language to determine which compiler to use. Once you have compiled
a program, you can also :Prep and :Run it from within Qedit.
The generic :Compile command does not currently apply to NM compilers. Instead,
use the regular command files in Pub.Sys, which we adjust to use our special
Qcompxl routines (e.g., COB85XL).
Commands for MPE V and CM Compiles
COMPILE files [ ;INFO [=] "string" ]
CO files
COBOL files {see Set Whichcomp}
COBOLI files
COBOLII files
SPL files
RPG files
FORTRAN files {see Set Whichcomp}
FTN files {FORTRAN 77}
Pascal files
The files Parameters
All of the compile commands use the same file parameters:
:COMPILE text, usl, list, master, new
The text file is the file that contains the source code. It may be a Keep file or a Qedit
workfile (if the compilers have been properly "fixed"). Compiler fixing is part of the
standard Qedit install jobs. But, the "copylib" file for COBOL cannot be a Qedit file;
it should be KSAM. If the text file is "*", the currently open workfile is compiled. If
none is open, the one just closed is compiled.
The usl file is the file where the compiler deposits the machine code that it generates.
This file must be "prepped" into a program file before you can actually :Run. The usl
file defaults to $newpass (or $oldpass). You can specify a USL file created via the
Segmenter (-buildusl) or by a previous compile (e.g., :save $oldpass after compile).
The list file is where the compiler sends its listing. The default is to print on $stdlist
(i.e., your screen). If the list file is "LP", it always refers to Dev=LP. To direct the
listing to a device name other than "LP", use a regular File command:
/file sp;dev=serialp
/cobol x,,*sp {compile file x, list to device Serialp}
The master file is a master source file that is merged with the text file by line number
at compile time. This parameter is not supported for FORTRAN 77, Pascal, or C.
The new file is an optional output disc file that can be created by merging the master
file and the text file.
Examples
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 121
/cobol abc.source,,lp
/open def.source
/co *
{output goes to dev=lp}
{open another source file}
{Lang of file selects compiler}
/shut
/spl *
/open *
{close current workfile}
{compile errors to terminal}
{resume editing}
Compiling a Range
You can specify a line range instead of a filename if you like:
/fortran 300/414.5
This option works only with the current workfile, accepts only explicit line numbers
(e.g., 1.0, not FIRST), and allows only a single range (e.g., not 5/10,20/30).
Set Whichcomp Command
Qedit has the :COBOLII command to run the COBOLII program and :COBOLI to
run the COBOLI program. To use COBOL-85, you need to use Set Whichcomp.
/set whichcomp cobol 85
/set whichcomp cobol 74
/set whichcomp cobol 68
{run COBOLII,COBOLIIX}
{run COBOLII for :COBOL}
{run COBOLI for :COBOL}
Qedit has the :FORTRAN command to compile FORTRAN 66 and :FTN to compile
FORTRAN 77. Use Set Whichcomp to make FORTRAN 77 the default for
:Compile:
/set whichcomp fortran 77
Interrupting with Control-Y
You can use Control-Y during a long compile to interrupt the compiler. It should
print the question "Terminate program [no]?". Answer "YES" to abort the compile,
or answer "NO" to continue compiling.
Compile Priority
Normally, the compiler is run in the same priority subqueue as Qedit, but the System
Manager can specify a maximum subqueue for compiles that is lower than the
programmer's logon priority. In these cases, the compiler is run in the lower
subqueue (see the installation chapter). The System Manager can also specify that no
on-line compiles at all are to be done in Qedit.
Include Files
The Qedit compiler interface interprets $include commands within Qedit workfiles at
compile time. This is the syntax:
$INCLUDE filename or !INCLUDE (filename)
The HP Pascal syntax for $include is okay: $include 'filename' $. For Transact
systems, use !Include with the filename in parentheses. For C, use #Include .
The Include statement must start at the beginning of the line.
When the Include command is encountered during the compile, the Include file is
opened, and the lines are returned to the compiler with their actual sequence
numbers. If the file cannot be opened, Qedit returns the include line to the compiler
for interpretation. If the file can be opened, the include line is returned as a comment.
Include is recognized only in Qedit workfiles, not in Keep files. However, "included"
files themselves can be either Qedit files or Keep files. Nesting of includes is
supported to ten levels deep.
Note that the SPL compiler interprets lines that start with an exclamation mark as a
comment, even !include. The Qedit compiler interface treats this as a valid !include
122 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
statement, not a comment. To prevent this, use the SPL << >> comment syntax
instead.
Compiling to a Disc File
If you direct your compiler error listing to a disc file, you can use Qedit to examine
the errors and fix them.
First, add a line to the beginning of your workfile specifying "$control nolist", which
means "list only lines with errors":
/add 1.1
1.10 $control nolist
1.11 //
Later, when you want a full listing, change this line to "$control list", or
"$control source" for COBOL.
Build a disc file, compile the listing into it, and display it:
/:build list;rec=-132,64,f,ascii;disc=4000,32
/:spl *,,list
{compiler listing goes to List}
/lq list
{displays compiler listing on your terminal}
On subsequent compiles, you can use the same file and the compiler should erase the
previous contents. With this technique, you can do your compile in a job stream and
continue editing another file while you are waiting. When the stream job finishes,
you can check the results from within Qedit, even if you are remotely located from
the batch line printer. Using :Tell, you could have the Job send a message to your
Session when it completes.
Trapping Compiler Syntax Errors
Qedit can trap compiler syntax errors and show you each line in your source code for
you to correct. See the chapter "Using Qedit with MPE Programming Tools" for full
details.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 123
Delete Command [D]
Deletes lines from the workfile.
DELETE [ rangelist ]
(Q=no display, J=verify)
(Default: rangelist = *)
Delete prints each line in rangelist, with an underline character after the line number,
as it deletes them, unless you use DQ.
Notes
If you do Delete All, you must answer "Y" to a verifying question before the lines
will be deleted. This also applies if you Set Check Delete is ON and you delete more
than 5 lines.
If you delete the wrong lines, you can cancel the Delete by striking Control-Y.
However, you must use Control-Y before you press Return on the next command
line. Qedit responds by printing "Undeleted" or "Canceled". Once you have typed in
the next command line and press Return, your chance to recover using Control-Y is
gone and the previous Delete command is final. You can still undo the deletion using
Undo.
Delete All resets the Set Keep Name (default for Keep command) so that a later
Keep command will not wipe out the wrong file by mistake.
Confirm Each Deletion
Use DJ to give yourself approval over each delete before it is carried out. With DJ,
Qedit displays the line (even if the Quiet option is used) and asks you for a Yes, No,
or Stop answer.
Answer No or Return to keep the line.
Answer Yes to delete the current line. Unlike the basic Delete operation where lines
are removed with the next command, lines confirmed in DJ are deleted immediately.
They can be recovered with an Undo command.
Answer Stop if you wish to stop the delete process. When you use Stop, lines that
have been deleted are not recovered automatically. Use Undo to recover them.
Examples
124 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/delete 5/6
{remove lines 5 and 6 from file}
5
_this is line 5
6
_and this is line 6!
/dq 2 10/49
{delete lines 2 and 10/49}
/delete "."(1/1)
{delete lines with "." in column 1}
{Implied rangelist is ALL}
/del "."(1/1 nomatch) {delete lines without "."}
/d "~"(pattern)
{delete all blank lines}
/dj 3/66
3
this is line 3
Delete it (Y,N or Stop)
4
this is line 4
Delete it (Y,N or Stop)
5
this is line 5
Delete it (Y,N or Stop)
6
this is line 6
Delete it (Y,N or Stop)
1 line Deleted!
Qedit 5.9 for HP e3000 User Manual
[No]:
[No]:Y
[No]:n
[No]:S
Qedit Commands • 125
Destroy Command [DES/:D]
Purges the current workfile, a named MPE file, a Copylib member, or a spool file,
after first verifying with the user.
DESTROY [ filename ]
(Default: current workfile)
The filename parameter can be the name of any file that you have write access to, "$"
to refer to the "last" file name mentioned in another command, or "*" to refer to
either the current workfile or, if none is currently open, the one just Shut. To purge a
Copylib member, put the name in parentheses and do a :File command for "copylib".
To purge a native-mode spool file, just refer to the number preceded by a #.
Examples
/destroy crept23.dead
CREPT23.DEAD.GREEN,OLD Qedit File, # of lines=162
Purge file [no]? Oui
{that's French for Yes}
/open ctemp
/des *
CTEMP.BOB.GREEN,OLD Qedit file, # of lines=15
Purge file [no]?
{Return key means "no"}
File NOT purged
/list datapg2
{check contents of file}
/destroy $
{...then purge it}
/destroy #o1234
{purge an NM spool file}
/file copylib=copylib.pub.develop
/destroy (custrec)
Notes
The MPE :Purge command also purges files, but it does not ask for your approval
first. If you abbreviate the Purge command (as in PU), you are sent to the Destroy
command instead.
If you are purging an opened file that is "clean" (that is, a file that has not been
changed since the last save), Qedit does not ask for approval before purging the file.
126 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Display Command [DISPLAY]
Prints a message on the terminal - handy for instructions in UDCs. The message is
not in quotes and is separated from the command name by a single space. See also
Pause.
:DISPLAY [ message ]
(Defaults: blank line)
Examples
/display To get out of Suprtool, type Exit
/display
/run suprtool.pub.robelle
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 127
Divide Command [DI]
Divides a line into two or more lines at specified columns. Divide can turn a fieldoriented record into a series of lines with one field per line. It can also append a
blank line after every line in a file. See also VV in Visual. For the opposite of
Divide, see the Glue command.
DIVIDE [ ( columnlist ) ] [ rangelist ]
(Default: columnlist = ], rangelist = *)
The columnlist parameter is one or more valid column numbers in ascending order
such as (10 20 30), or it may be a (]) for "after end-of-line" (i.e., append a blank
line). All characters from the specified column to end-of-line are moved to a new
line after the original line.
The rangelist parameter specifies one or more lines in the file. Each line is split into
two or more lines according to the column parameter. The default rangelist is the
current line.
The default columnlist is "]", except when the Divide command has no parameters or
only a "string" rangelist. Then the current line is split at the "current column". When
Divide has no parameters, the current column is "]". Following a successful string
match, the current column is the first column of the string position in the line(s).
Examples
/find "abc";divide
/list *+2;divide
/divide (20) all
/divide (20 40) @
/divide (10 20 30)
/divide (]) */*+10
/divide (20)"Qedit"
/divide "Qedit"
/divide (])"Qedit"
{move "abc..." to a new line}
{move ahead 2 lines, add a blank line}
{split every line at column 20}
{split every line at columns 20 and 40}
{split current line at 3 places}
{add blank line after lines */*+10}
{split all "Qedit" lines at column 20}
{split all "Qedit" lines at "Qedit"}
{add blank line to all "Qedit" lines}
Notes
After a Divide command, the current line is the last line divided. To not print the
lines, use DivideQ.
Divide works within the current Left and Right margins. That is, characters to the
right or left of the current margins are not moved.
When working with COBOLX files, the Divide command does not consider the tag
(columns 73 to 80) as part of the data. This means that the current tag data is not
moved to the new split line. It also means that you cannot divide a line passed
column 73.
The QEDITCOUNT JCW is updated with the number of lines divided, rather than
the number of lines resulting.
128 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Do Command [DO]
The :Do command repeats (without changes) any of the previous 1,000 commands.
DO
[ start [ / stop ] ]
[ string ]
[ ALL | @ ]
(Default: repeat the previous command)
Commands are numbered sequentially from 1 as entered and the last 1,000 of them
are retained. Use the :Listredo command to display the previous commands. You can
repeat a single command (do 5), a range of commands (do 5/10) or the most
recent command whose name matches a string (do list). If you want to modify
the commands before executing them, use :Redo or Before.
Examples
/listredo
/do
/do 39
/do 5/8
/do list
/do show
/do showjob job
/do @job
/do -2
/do -7/-5
/do 5/
{or
{do
{do
{do
{do
{do
{do
{do
{do
{do
{do
/bj or ,, }
previous command again}
command line 39 again}
command lines 5 to 8 again}
most recent List command}
last starting with "show"}
last "showjob job" command}
last containing "job"}
command before previous}
by relative line number}
command lines 5 to "last"}
Notes
The :Do command can be abbreviated to ",." as in MPEX, but you cannot use ";" to
combine commands on the same line. To stop a :Do All, use Control-Y.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 129
:Editerror Command [EDITERROR]
Pulls up "errors" in source files for the user to correct. :Editerror depends upon a
special error-file that is usually generated by the program that detects the errors. See
Appendix B for the file format. Some compilers, such as SRN's SPLash! compiler,
can generate Qedit error-files. For COBOL, SPL, Pascal, and HP C, Qedit converts
compile errors into :Editerror format using the Editerr utility program.
:EDITERROR error-file [VISUAL | NEXT | PREV]
(Default: Line mode)
There are two basic types of :Editerror command: the first command after a compile,
and a subsequent command.
/:editerror error-file [VISUAL] {first command}
/:editerror error-file NEXT
{subsequent}
Finding the First Error
The first command after a compile would not specify NEXT or PREV and would
find the first error in the error-file. Qedit prints the error message, then Opens or
Texts the source file containing the error, and positions itself to the line with the
error. If the current open file is a Qedit workfile, :Editerror does an automatic Shut
command on it. If the current open file is Qeditscr and you did a previous Text and
made some changes, :Editerror does an automatic Keep command on it (you will see
the question "Purge existing file?"). :Editerror can handle Copylib members if the
member name is enclosed in parentheses and followed by the name of the Copylib
file (without a space).
If you specify VISUAL on the first command, Qedit assumes that you wish to
correct the errors in Visual mode. Qedit does not throw you into Visual mode, but if
you enter (or re-enter) Visual at this point, Qedit will display the error message at the
top of the screen where the error occurred. If you do not specify Visual, Qedit
assumes that you want to correct the errors in Line mode. Normally, the first
command would be included in the UDC that does your compile.
Subsequent Errors
Subsequent commands retrieve the "next" (or "previous") error in the same error-file.
If you used the Visual option on your first command, Qedit allows you to use the F4
and F3 keys in Visual to find the Next or Previous error. Visual mode does the
necessary :Editerror commands for you automatically.
If you do any string searches in fixing your errors, you will lose the ability to use F4
and F3 for Next and Previous Error. This often happens when you must search
backward in your file for the definition of a data item. If the current string value does
not equal "$error", the F4 and F3 keys do not pull up the next and previous errors to
be fixed. You can now reactivate error-fixing by searching for "$error" explicitly.
You do not need to go through all the errors before recompiling. If you go past the
last error to be fixed, Qedit prints a warning that says so. The same occurs if you try
to go backwards beyond the first error to be fixed. Qedit does not turn off errorfixing just because you reach the end -- you can still go back to the previous error by
pressing F3.
Resetting :Editerror Mode
Once you do the :Editerror command you are in a special mode where the F4 and F3
keys pull up errors. This mode stays enabled until one of the following resets it:
130 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Line Mode Tip
•
another :Editerror operation
•
:Editerror without any parameters
•
any explicit Text, Open, Keep, Shut or New command
•
using the F8 key to exit from Visual back to Line mode
If you use Line mode to correct your errors, you will need a UDC to retrieve the next
and previous error. For example, if the error file is called cerrors:
nexterror
option nolist
editerror cerrors next
*****
Screen Format
In most programming languages, it makes more sense to see the lines above the point
of error, rather than after. The error line becomes the current line in :Editerror and
the default Visual display is zero lines above the current line and 19 lines after. You
can of course override this with Set Vis Above and Set Vis Below. If your Above
value is 0, :Editerror changes the screen format so that there are 9 lines above and 9
fewer lines below (with a minimum of 9). Naturally, :Editerror saves the original
values and resets them when you end error-fixing mode.
UDCs
See the UDCs called COBERR and EDERR in the file Udc.Catalog.Robelle for
examples of how to use the Editerror command effectively.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 131
:Escape Command [ESCAPE]
The :Escape command causes control to leave all User Commands (regardless of
nesting levels) and return to the Qedit prompt. The :Escape command is valid only in
User Commands (UDCs and command files). It returns an error if executed from the
Qedit prompt or in a Use file.
:ESCAPE
(Default: none)
Examples
if cierror = 999 then
escape
endif
See also the :Return command.
132 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Exit Command [E/F8]
Exit from Qedit and return to the operating system.
EXIT [string]
The current workfile is closed and Qedit terminates. The F8 user key is the same as
Exit.
To close the current workfile without exiting, use Shut. Remember: you do not need
to Exit in order to do :COBOL, :Prep or :Run, but you do need to Exit in order to do
:BYE.
When you Exit, Qedit checks whether you have any unsaved edits in any of your
Extra scratch files. If so, you are prompted to Discard? them, or stay in Qedit to save
them. If your primary Qeditscr file is temporary and named "Qeditscr", Qedit warns
you that you forgot to save your changes, but does not purge the file. You can reenter Qedit, Open it and resume work or save your edits.
Examples
:hello bob.green
{log on to the computer}
:run qedit.pub.robelle
/open qedit.doc
{open file to work on}
/modify 2482.5/
{do some editing...}
.
.
.
/:prose *
{use a UDC to format a document}
/exit
{ready to quit for the day!}
:bye
{disconnect from computer}
Notes
To avoid accidental Exit as a result of pressing F8 one time too many, you can run
Qedit with Parm=64. This forces user approval of Exit.
The only situation where Qedit does not terminate on an Exit is when you invoke
Qedit from another user program (e.g., from SPOOK, MPEX, or SELECT). In this
case, Qedit "suspends" so that the father process can quickly "activate" Qedit again.
When you reactivate Qedit you can resume editing with Open *. If the father does
not want to hold onto Qedit, he should get rid of it with the KILL intrinsic. If the
father process is like HPDesk and does not notice that Qedit remains suspended, you
should :Run Qedit with Parm=32 or do Set Suspend Off to force Qedit to terminate
on Exit instead of suspending.
The string parameter is only allowed when Qedit is running as a server. The string is
a message sent to the Qedit for Windows client. The client receives the exit
notification, displays the message and disconnects immediately. If no string is
specified, a default message is displayed.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 133
Find Command [F/F4]
Finds the next line in the workfile that contains a string. Use Findup if you want to
search for the previous line. Find always finds a single line that matches a string. Use
the List command if you want to find many lines that match a string.
FIND [string] [linenum]
FIND [string range] [linenum]
(Q=no display)
(Default: string = recent; linenum = *+1)
Find defaults string to be "same as last string" and linenum to be "starting from the
next line". This saves having to repeatedly type the string and linenum. Once you
have defined your string and starting position, just enter "F" to find the next line.
Find does not start searching at the beginning of your file. Find will start searching
for the string at the line after the current line, unless you specify a linenum to start
the search. If you want to search from the beginning of your file, use Find string
FIRST.
The F4 user key does the same function as Find with no parameters.
Examples
/find "exit" first
{find first line with "exit"}
45
this command will cause an exit from the
(28)^
/f
{find next line with "exit"}
90
after you exit from a module, the program
(11)^
/f
{continue finding lines...}
...
/f
{...until you reach end of file}
Warning: No Line
{prints error and rewinds}
Error: End of File
/f
{next Find wraps around!}
Warning: Rewind to FIRST
45
this command will cause an exit from the
(28)^
/fq"$page"(1/5);m
{find next $page and modify it}
/fq;c""exit"
{find next string and change it}
/fq;c"""
{find next string and remove it}
/f "start"/"end" [
{find string range and set ZZ}
Lines 5/11 saved in ZZ
Notes
The Q option lets you find the line without printing it. Use FQ if you intend to
Modify the line after you find it.
Find prints an error when the search reaches the LAST line without locating the
string. Then, if you enter another Find without a line number, the search starts from
the FIRST line in the file, after printing a warning.
See the /Qedit command for a command file that uses the Find command and checks
the value of CIERROR to see if the string was found. The Find command only sets
the CIERROR JCW when it is executed from a User Command. It does not set the
JCW when executed from $stdin or from a usefile.
To find/see all occurrences of a string in a file, use the List command.
134 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
When a string range is used and a corresponding block is found, the start and end
line numbers are stored in the ZZ marker.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 135
Findup Command [FINDU/F3]
Finds the previous line in the workfile that contains a string. Findup can be shortened
to ^. Use Find if you want to search for the next line.
FINDUP [string] [linenum]
(Q=no display)
(Default: string = recent; linenum = *-1)
Findup defaults string to be "same as last string" and linenum to be "starting from the
previous line". This saves having to repeatedly type the string and linenum. Once
you have defined your string and starting position, all you need to enter is "^" or
"FINDU" to find the next string.
The F3 user key does the same function as Findup without parameters.
Examples
/findup "exit" last
{find last line with "exit"}
90
after you exit from a module, the program
(11)^
/findup
find previous line with "exit"
45
this command will cause an exit from the
(28)^
/^
{continue finding lines...}
...
/^
{...until you reach start of file}
Warning: No Line
{prints error and rewinds}
Error: Beginning of File
/findup
{next Findup wraps around!}
Warning: Rewind to LAST
90
after you exit from a module, the program
(11)^
/findupq;mod
{find string and modify it}
/findupq;c""exit"
{find string and change it}
/findupq;c"""
{find string and remove it}
Notes
Refer to the notes under the Find command.
136 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Form Command [FORM]
Displays information about a self-describing file created by programs such as
Suprtool. These programs store information about the record layout such as field
names, data types, length.
FORM [ $lp | $lpa | $lpb ] [ filename ]
(Default: filename = current Text file)
If filename is omitted and a workfile is currently active, Qedit uses the name of the
Text file (see Verify Keep). An external filename can be specified.
If the file is not self-describing, Qedit displays the following message:
Error:
File is not self-describing.
Self-describing files on MPE have a special filecode, SD. The data description
information is stored in the file userlabels. For example, a self-describing file would
look like this:
ACCOUNT=
GL
FILENAME
CODE
X1DSBEDR
SD
GROUP=
DATA
------------LOGICAL RECORD----------SIZE TYP
EOF
LIMIT R/B
302B
FA
3500
3500
----SPACE---SECTORS #X MX
13
320
1
1
The Form output looks like this:
Self-describing information for X1DSBEDR.DATA.GL
File: X1DSBEDR.DATA.GL
(SD Version B.00.00)
Entry:
Offset
CHAR-FIELD
X5
1 <>
INT-FIELD
I1
6
DBL-FIELD
I2
8
PACKED-FIELD
P12
12
PACKED*-FIELD
P12
18
QUAD-FIELD
I4
24
ID-FIELD
I1
32
LOGICAL-FIELD
K1
34
DBLLOG-FIELD
K2
36
ZONED-FIELD
Z5
40
Limit: 3500 EOF: 3500 Entry Length: 44 Blocking: 64
LP listing
Overrides default output to $stdlist. $lp, $lpa and $lpb send output to a file with the
same name as the option.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 137
Forward Command [FO/F6]
Starts "browsing" the current file by displaying the next page "forward". You stay in
"browse" mode until you enter any command (see List, jumping option).
FORWARD
(F6 key does the same)
In Line mode, Backward and Forward (or F5/F6) throw you into List-Jumping's
Browse mode. Qedit displays a screen of text, where the screen size is either 23 lines
or what you specify with Set List LJ, then waits for you by asking "More?". Press
Return to see the next screen, typing a line number moves you to the screen starting
at that line, pressing F2-F6 does the appropriate action, and F8 or "//" or Control-Y
or typing any command gets you out of browse mode. At the "More" prompt, the *
"current" line is the last line displayed.
138 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Garbage Command [GAR]
Finds and recovers wasted space in the current workfile.
GARBAGE
(Q = no summary)
If you keep adding lines to a workfile and editing them, eventually you will get an
"Error: Full" message in Line mode or "File nearly full!" in Visual mode, and be
unable to add more lines. One method of continuing at this point is to use the
Garbage command.
/garbage
/gar
{minimal command name}
Garbage combines partially full blocks to squeeze out free blocks, but it also
searches the workfile for any blocks that have been "lost" (i.e., are no longer on the
"free list" or the "text list"). Garbage does not release extents, nor does it reduce the
EOF. It does not make your file any smaller, it just allows you to continue editing by
finding usable space within the file.
Garbage prints a summary of how much space it recovered and how much is
available in the file. The summary report can be suppressed using GarbageQ.
5 blocks squeezed out, 2 found, 55 used,
10 on free list, 9 for expansion.
In this example, Garbage reports that 5 blocks were retrieved via squeezing, 2 lost
blocks were found, 55 blocks are currently used to hold text, 10 empty blocks are
held on a "deleted-block" list (the free list), and 9 blocks are available if the EOF is
expanded toward the LIMIT.
Expanding Your File
If you need still more space, you should build a bigger file using the Text command.
Text creates a workfile with room to add more lines.
/open crept23
/add
5.11 this is a new line
Error: Full
/shut
{close the file that is too small}
/text *
{text Crept23 into larger Qeditscr}
/shut *
{rename as new Crept23, purge old}
/open *
{open new big file and edit...}
/add
5.11 this is a new line
Compressing Your File
If you want to compress your file into minimal disc space because you are through
editing it, use Garbage to minimize the number of blocks, then use New to build a
new smaller file, deriving the number of lines from a Verify Open of the old file, and
copy the old file into the new with Text:
/open crept99
/garbage
/verify open
/shut saveold
/new crept99 (2900)
/text saveold
Qedit 5.9 for HP e3000 User Manual
{minimize number of blocks}
{find out number of lines in file}
{rename file as Saveold}
{build new, smaller file}
{copy old file into new}
Qedit Commands • 139
Glue Command [G]
Joins a line with one or more following lines, either concatenated or at specified tab
positions. Use Glue to turn a list of fields into a single record-oriented line. See also
GG in Visual mode. For the opposite of Glue, see the Divide command.
GLUE [ ( columnlist ) ] [ rangelist ]
(Defaults: columnlist = ], rangelist = */*+n)
The columnlist is a list of ascending column numbers in parentheses such as (10 20
30), or ( ] ) for "after the end-of-line", which is the default.
The rangelist specifies which lines to combine. The default rangelist is the current
line plus n. When you specify a range of lines, Glue joins the lines in "pairs".
Examples
/glue
/gluej
/glue;glue
/glue (10) all
/glue (10 20 30)
/glue "string"
{joins *+1 to *}
{joins *+1 to * with space between}
{join *+1 and *+2 to *}
{joins lines in "pairs" at column 10}
{joins 4 lines into 1 record}
{glue "string" lines to lines that follow}
Notes
If there are not enough lines at the end of a rangelist to fill in each column of the list,
Glue does not go beyond the rangelist. If there is not enough room to move all of the
characters into the line, as many characters as will fit are moved, the following line is
not deleted, and Qedit prints an "overflow" warning.
After a Glue command, the current line is the line last spliced together. To suppress
printing of the spliced lines, use GlueQ.
If you don't specify a list of column fields, Glue removes leading spaces from the
following lines before moving them. To insert a single space between them, use
GlueJ instead. If you do specify columnar fields, Glue treats spaces as valid data and
moves them intact. If you specify more than one field, some nonblank data may be
overwritten if the columns are too close together or the lines to be glued are too long.
You can always use Undo to cancel a Glue command.
The QEDITCOUNT JCW is updated with the number of lines resulting, rather than
the original number of lines that were affected.
If Left or Right margins have been Set, only the text within the margins is copied and
the following lines are not deleted.
When editing COBOLX files, the tag area (columns 73 to 80) is not considered part
of the data. This means that the tag string on the next line is not moved to the new
line. It also means you cannot glue to columns passed 73.
140 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Help Command [H/?]
Gives instructions on the use of Qedit. Everything in the Qedit User Manual is also
in the Help command. "?" means the same as Help.
HELP
[ command [ ,keyword ] ]
[ TERMS [ ,word] ]
[ INTRO ]
[ NEWS ]
(Default: browse through the entire help file)
(Q = Quick Reference Guide "Quick Help")
The parameters have the following meaning:
command explains command; lists subsidiary keywords to select.
command,keyword finds keyword under command.
command,@ prints everything about the command.
TERMS [,word] explains word (see "Glossary").
INTRO explains how to apply Qedit to typical problems.
NEWS shows any new features in Qedit.
Examples
/h text
{explain the Text command and show sub-keywords}
/h text,@ {tell all about Text. Comma is required}
If Help cannot find your specified topic in the Qedit help file, it prints a warning and
search the system help file. To get system help directly, put a colon in front of Help
(i.e., /:help).
Quick Help - HQ
HQ looks for entries under the keyword Quick in the helpfile. Quick contains the text
from the Qedit Quick Reference Guide, offering the experienced user a review of
command syntax.
/hq visual
/hq shortcuts
{full-screen options}
{quick list of shortcuts}
Notes
The help file must be on the system for the Help command to work. If the file is
missing, Qedit still works fine, but you cannot get any on-line help. The default file
name is Qedit.Help.Robelle, but if you move Qedit to another account you should
move the help file to that account as well. Within the Help command, use "+" to see
what levels exist "beneath" you and "?" for "help on Help". The help file is organized
into levels: to go back to the previous level, press Return instead of entering a
keyword. Press F8 to exit the QHELP subsystem completely and return to Qedit. Use
the Prev Page (or Page Up) key on your terminal to review help already printed.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 141
Hold Command [HO]
Lets you explicitly write lines to the Hold file.
HOLD [ filename ] [ rangelist ]
(Default: hold current line)
(Q=hold without display)
(J=append, without erasing)
You can refer to the current contents of the Hold file by the actual file name, "hold",
in any of the commands that access external files (Add-File, List, Use).
Examples
/hold 50/60
{erase Hold, hold lines}
/holdj 100/198
{append more lines to Hold}
/ho "direct"
{hold lines with string}
/open abc.src
/add 33=hold
{adds held lines to abc.src}
/holdq qedhint.help.robelle
/list hold
Implicit Hold
When using the Add command to move or copy lines within a file, Qedit overwrites
a file named Hold0 with a copy of the lines. It counts the lines and tries to select a
line number increment that will accommodate the number of lines being added to
your workfile. So, if the command fails or if you wish to copy the same lines again,
you can refer to the Hold0 file. Adding from an external file also holds the lines if
you specify a rangelist for the file, and if the file is not the Hold file itself.
/add 55=hold0
/list hold0
{the Hold file is temporary}
Notes
You can save the current Hold file using the MPE Save command:
/save hold
/rename hold,newname
On MPE/iX, the Hold files are created with variable-length records and a limit of
250,000 lines. On MPE V, the Hold files are created with variable-length records and
space for 3 megabytes of data.
Every time you use "hold" or "hold0" by themselves as a file name in any command,
Qedit replaces the word with the fully-qualified file name of the appropriate Hold
file.
/Add 1=hold
translates to
/Add 1=hold.mygroup.myacct
142 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:If, :Endif, :Else, :Elseif Commands
In command files, UDCs, usefiles, and even from the /-prompt, use If, Endif, Else
and Elseif commands to create conditional logic. See also the While command, the
/Qedit command and the INSIDEQEDIT JCW.
:IF expression [THEN]
:ELSEIF expression [THEN]
:ELSE
:ENDIF
Examples
Here is a sample command file to show a specific session or all sessions on the
system. The parameter is the session number, which the If tests for zero default value
in deciding whether to show one or all sessions:
PARM sessnum=0
setjcw jsnum=!sessnum
if jsnum=0 then
showjob job=@s
else
showjob #s!sessnum
endif
To invoke this command, put it in a file named "SS", then type the file name,
optionally followed by a session number:
/ss
/ss 456
Although :If commands may be nested up to 30 levels deep, :Elseif provides an
alternative, effectively giving you a "case" command. Any number of Elseifs may
follow an If, but only one Else may follow an If or Elseif. The "Then" keyword is
optional in Elseif, and in If as well.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 143
Justify Command [J]
With Justify, you can do text formatting: center lines, right-justify lines, left-justify
lines, and fill text into margins.
JUSTIFY [option] [keyword ...] [rangelist]
(Q=no display)
(Default option: Null or Set Justify)
When the Justify command is processing the range of lines you specified, if you
decide not to continue, press Control-Y to stop the formatting.
Options Specify Which Function
Justify Right
right-justify each line
Justify Center
center each line
Justify Centre
Canadian spelling!
Justify Left
remove leading spaces
Justify Format
fill lines, ragged right margin
Justify Both
fill lines, straight right margin
Justify Null
default - no changes - safety
Keyword Parameters of Justify
MARGIN column
right edge, relative to left
TWO [ ON|OFF ]
maintain 2 spaces after . ? and !
INDENT spaces
indentation for list of points
WITHINDENT
activate configured indentation
STOP "chars"
break justification when found
START "chars"
start new paragraph
You may shorten options and keywords to the leading letters.
Rangelist Specifies Which Lines
For the Format and Both options, the rangelist specifies some lines to format.
Warning: if you type a single line number (e.g., just both 5), Qedit begins
formatting lines from that line number to the end of the paragraph. Qedit sees blank
lines as end-of-paragraph markers, so if you justify format all you end up
with smooth and even chunks of text, set off by blank lines. This is one of the few
places in Qedit where a single line number implies a range of lines.
For the Left, Right and Center options, a single line rangelist means a single line.
But, you can specify a "string" rangelist to center or justify only lines containing a
string. Specifying a "string" rangelist with the Format or Both options is equivalent
to specifying a single line number i.e. formatting starts with the line which has the
string to the end of the paragraph.
Verification Before Formatting
144 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
If Set Check Justify is ON, Justify Format and Both require user verification before
formatting more than 5 lines. This should eliminate inadvertent formatting of entire
source programs!
You can also use the Undo command to undo the effects of the Justify command.
Left and Right Edges for Justify
Justify works within borders called the left and right edge. The left edge is usually
column 1, or column seven 7 in standard COBOL. The right edge is usually the
highest column number allowed in the file (e.g., 80 for JOB files). However, if you
use Set Left and Set Right to create margins for your file, Justify operates within
those limits. Set Left will be the left edge and Set Right will be the right edge. You
can also use the Margin keyword to establish the right edge for Justify, but remember
that this edge is relative to any Set Left value.
Examples
/justify center 5/6
/j right 5/6
{center lines 5 through 6}
{right-justify lines 5 through 6}
/j left 5/6
{left-justify lines 5 through 6}
/j format 5/50
{format lines 5/50 into margins}
/j f 5/6
{splice lines 5 and 6 into one line}
/j both 5
{format a paragraph, even right edge,}
{ from line 5 to the next blank line}
Right Justifying Lines
Justify Right shifts each line of rangelist to the right until the last nonblank character
is at the right edge. For example:
/justify right margin 50 rangelist
Input lines:
Robelle Solutions Technology Inc.
Tools for HP3000
Output lines:
Robelle Solutions Technology Inc.
Tools for HP3000
Centering Lines
Justify Center adjusts each rangelist line so that it is centered between the left edge
and the right edge. For example:
/justify center margin 50 rangelist
Input lines:
Robelle Solutions Technology Inc.
Tools for HP3000
Output lines:
Robelle Solutions Technology Inc.
Tools for HP3000
Left Justifying Lines
Justify Left removes leading spaces from each rangelist line, until the left-most
nonblank character is at the left edge. This will left-justify the lines. Use for this
option to recover from an inadvertent Center or Right option. For example:
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 145
/justify left rangelist
Input lines:
Robelle Solutions Technology Inc.
Tools for HP3000
Output lines:
Robelle Solutions Technology Inc.
Tools for HP3000
Filling Words into Tidy Paragraphs
Justify Format adjusts the processed lines so that the words fill the space between the
left edge and the right edge, but allows the right edge to be ragged:
/justify format margin 50 rangelist
Input lines:
The Format keyword performs a
function which is equivalent to
Format mode in TDP/3000. Uneven lines
are converted into lines of about
the same length.
Output lines:
The Format keyword performs a function which is
equivalent to Format mode in TDP/3000. Uneven
lines are converted into lines of about the same
length.
Making Both Edges Even
Justify Both is similar to Justify Format, except that both the left and right edges of
the text are even. This is accomplished by inserting blanks between words. For
example:
/justify both margin 50 rangelist
Input lines:
The Both keyword performs a
function which is equivalent to
Format;Just ON in TDP/3000. Uneven lines
are converted into lines of
exactly the same length.
Output lines:
The Both keyword performs a function which is
equivalent to Format;Just ON in TDP/3000. Uneven
lines are converted into lines of exactly the same
length.
Null Option
Justify Null is included as an option to serve as a default. If Both were the default
option, most of your file would be quickly formatted if you accidentally typed "J 5"
instead of "LJ 5".
Configuring the Justify Command
The five options (Right, Center, Left, Format, and Both) and the four keywords
(Margin, Two, Indent, and Withindent), configure the Justify command. The
hierarchy of configuration values is as follows:
Startup default (the "default default")
146 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
overridden by
SET Justify (the configured default)
overridden by
Keywords in Justify command
You set your own defaults for the Justify option and keyword values using Set
Justify. Once you find the setting you like, you may want to put them in your
Qeditmgr configuration file so you won't have to do the Set Justify command every
time you run Qedit. For example:
/set justify null margin 50 two on
causes
/justify both 5
to be interpreted as
/justify both margin 50 two on 5
but you can override your own defaults, as in
/justify both margin 60 10/20
which merges with your Set Justify values to produce
/justify both margin 60 two on 10/20
Configuring the Right Edge
The Margin keyword specifies the right-most column for processed lines. This
column is needed for the Right, Center, Format and Both options. The value you
specify is relative to any Set Left margin that is effective at the time of the Justify
command.
Determining the Left Edge
For the Both and Format options, the left margin is determined by looking at the first
and second lines of each "paragraph". If the first and second line are indented, the
entire paragraph will be indented. Of course, this indentation is relative to any Set
Left.
/justify both margin 50 linenum
Input lines:
The Both keyword performs a
function which is equivalent to
Format;Just ON in TDP/3000. Uneven lines
are converted into lines of
exactly the same length.
Output lines:
The Both keyword performs a function which is
equivalent to Format;Just ON in TDP/3000.
Uneven lines are converted into lines of
exactly the same length.
Two Spaces at End of Sentence
Normally, when Qedit adjusts text with Format and Both, it inserts one space
between each symbol, regardless of the number of spaces between symbols in the
input text. If the Two keyword is ON, Justify maintains two blanks after the end of a
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 147
sentence (i.e., after a . ? or !, or one of those three followed by a quote mark or a
right parenthesis and a space). The default for this keyword is OFF.
Justify does not insert two spaces if the input only contains one; it merely maintains
two spaces if they are there already (this means you don't have to worry about getting
two spaces in a name like Calvin C. Cook).
/justify format two on margin 70
99.5/
Formatting a List of Points
The Indent keyword is a special capability for handling lists of numbered points (1.,
2., 3., ...). It assumes that your text is indented and that the numbers for each point
appear to the left of that indentation. The Indent parameter specifies the number of
spaces at the start of each line that will not contain text to format. Justify leaves
anything to the left of this border "as is". In fact, the existence of text to the left of
the border acts as an "end-of-point" indicator, eliminating the need for a blank line
between points to stop the justification. Indent is relative to any Set Left.
The end of each point in a list is effectively an end of paragraph. Here is a sample of
what happens when you attempt to format a list of points without the Indent
keyword:
/justify both margin 50 rangelist
Input lines:
1.
2.
Text which occurs in
a list of points should also
be formatted into even lines.
Any text to the left of column 5
causes a
"justification break".
Output lines:
1.
Text which occurs in a list of points should
also be formatted into even lines. 2. Any
text to the left of column 5 causes
a
"justification break".
All of the points have been run together into a single point. You can avoid this result
by inserting a blank line at each point, or by doing Justify on each point individually,
or by using the Indent keyword:
/justify both margin 50 indent 4 rangelist
Input lines:
1.
2.
Text which occurs in
a list of points should also
be formatted into even lines.
Any text to the left of column 5
causes a
"justification break".
Output lines:
1.
2.
Text which occurs in a list of points should
also be formatted into even lines.
Any text to the left of column 5 causes a
"justification break".
Activating Indentation
Withindent activates an Indent value that you have previously configured with Set
Justify Indent. Withindent allows you to settle on a single indentation for all "lists of
148 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
points" without having to respecify that value on every Justify command. You
merely specify Withindent when you format a list of points:
/set justify indent 4
/justify format 5
{configure potential indentation}
{this is not a list of points}
/just f with
{this is a list of points}
9
Justification Breaks and Formatting Commands
Justify has options to define characters that start and/or stop justification when found
in column one. These options make it much easier to justify text in files which
contain embedded commands and special characters for a format program (e.g.,
Prose, TDP, etc.). The specific characters are defined using the Start and Stop
options:
/set justify stop ".+" start "` "
This command says that any line with "." or "+" in column one stops text
justification and that line is not changed. Any line with "`" or " " (space) in column
one ends justification of the previous paragraph and signals a new paragraph (i.e.,
that line is formatted as part of the next paragraph).
It's important to note that a "string" rangelist has precedence over Start and Stop
characters. In other words, the latter options are ignored.
Here is an example which justifies some text from a Robelle document that consists
of both text and embedded Prose formatting directives. Note that lines beginning
with "." and "+" are not altered, and the line beginning with "`" properly appears as a
new paragraph.
/justify start "` " stop ".+" margin 50 format all
Input lines:
.for([ T
S:40 // l55 /
"-" pn:1 "-" /]
+
[ S
T:40 // l55 /
"-" pn:1 "-" /])
.par(f` p5 s1 u3).com Define ` as Start of Paragraph
.ent `|1Welcome to Compare|
.beginkey compare
Welcome to version 2.2 of Compare -- a
file comparison program for text files.
`Compare answers the question,
"How different are these two text files?"
Compare will tell you whether lines
have been added, or whether a block of
lines is now different.
Output lines:
.for([ T
S:40 // l55 /
"-" pn:1 "-" /]
+
[ S
T:40 // l55 /
"-" pn:1 "-" /])
.par(f` p5 s1 u3).com Define ` as Start of Paragraph
.ent `|1Welcome to Compare|
.beginkey compare
Welcome to version 2.2 of Compare -- a file
comparison program for text files.
`Compare answers the question, "How different are
these two text files?" Compare will tell you
whether lines have been added, or whether a block
of lines is now different.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 149
Keep Command [K]
Creates a standard disc file and writes the workfile into it, including any user labels
copied by the Text command. Can also update or create a "member" in a COBOL
Copylib. Keep is the reverse of Text, which copies a standard disc file into a workfile
that you can edit. Use Text when you need to duplicate a file. You should not need
Keep very often - especially if you retain your files in Qedit format. In that case you
would use New or Open to start editing the Qedit workfile, and Shut to stop editing.
KEEP [filename][,options] [ rangelist ]
(Q=no linenums)
(Defaults: rangelist=ALL, filename=last)
Keep Options
Qedit allows several options on the Keep command. Note that the comma preceding
the option name is mandatory, and that spaces are not allowed before the comma or
the option name.
Keep filename,TEMP
temporary instead of permanent file
Keep filename,UNN
unnumbered (same as KQ)
Keep filename,YES
go ahead and purge old file
Keep filename,NO
never purge an old file
Keep filename,XEQ
assign xeq access
Keep filename,NOLABELS
discard user labels
Keep filename,RELEASED
:Release security
Keep filename,IFDIRTY
only if changes made
Keep creates a new disc file named filename. You can combine several options on
the same Keep command. The default filename is the name and domain (temporary
vs. permanent) of the last Text or full Keep (i.e., it does not count if you use a
rangelist or have reduced the margins with Set Left or Set Right). If filename already
exists, Qedit will ask you to verify that it is okay to purge it unless you specify the
,YES or ,NO option.
Usually the file will have sequence numbers in each line (this is called numbered),
but you can omit the sequence numbers with KQ, or by specifying the ,UNN option.
Keep transfers rangelist lines from the workfile to filename. The default rangelist is
ALL. Warning: Qedit writes only the data within the current left and right margins,
so reset the margins first if you want the entire line (e.g., Set Left; Set Right).
To save the current workfile lines as a COBOL Copylib member, put the member
name in parentheses, optionally followed by the file name (default is "copylib" for
which you usually have a :File command). If the member already exists, you will be
asked if you want to purge the old copy. If the member does not exist, it will be
created.
Examples
150 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/text menu.schema
{make a copy of existing schema file}
QEDITSCR
/find "FUNCTION-CODE"
14
FUNCTION-CODE,
X8;
/change "X8"X10"
14
FUNCTION-CODE,
X10;
/keep menu.new
{create a new schema file}
...
{do some more changes}
/keep
{save again with same name...}
MENU.NEW.DEV,OLD 80B FA # of records = 127
Purge existing file [No]? yes
{you must authorize purge!}
/s left 1;s right 50
/kq nov99.datafile
{define margins as first 50 columns}
{unnumbered with 50-byte records}
/k notes,UNN,TEMP,YES {unnumbered, temporary, purge old file}
/keep ,yes
{keep to last text, purging old}
/file copylib=copylib.pub.develop
/text (custrec)
/visual
/keep
{updates member}
/keep (custrec2)
{creates new member}
/keepq (custrec) copylib2.test.develop
Absolute File Name
If you are on a version of MPE/iX 5.0 which supports the Chdir command and the
creation of new files in the POSIX namespace, you may find yourself doing the
following: Text file xxx, Chdir to another directory to add from some other files,
then Keep to update your original file. Keep defaults to the "absolute" name (e.g.,
xxx.src.util or /user/dev/lib/src/xxx). This means you can change to other directories
after a Text, but still easily Keep the file back under its original name. In the past,
Keep would default to the "relative" name of the Text file (e.g., xxx), saving the file
in your current working directory.
Keep Only When Changes Were Made
Keep,Ifdirty only does the Keep operation if the workfile has been modified since
the last Text or Keep. This can be useful in job streams that do Changes: by not
Keeping files where no string changes occurred, you reduce the number of files that
appear on the partial backup. To see whether your workfile is clean or dirty, do
Verify Open.
Resetting File Commands
The Keep command pays attention to any :File commands that you have active. If
you specify a file-close disposition like Temp or Save, and then try to text and keep
the file with Qedit, the purge of the existing file cannot be carried out and Qedit will
print an error message (Fclose Err: Duplicate). Qedit observes the :File equation
even if you do not specify an asterisk before the file name. To avoid this confusion,
:Reset the :File equation before texting or keeping the file.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 151
/purge sj
/file sj;rec=-80,16,f,ascii;disc=200;nocctl;save
/showjob *sj
/t sj
Qeditscr
27 lines in file
/k
SJ.JIM.TECHSUP,OLD 80B FA # of records=27
Purge existing file [no]? y
Existing file apparently purged,
but still cannot save new file.
Fclose Err: Duplicate
SJ.JIM.TECHSUP,NEW 80B FA # of records=27
DUPLICATE PERMANENT FILE NAME (FSERR 100)
/reset sj
/k
SJ.JIM.TECHSUP,OLD 80B FA # of records=27
Purge existing file [no]? y
27 lines saved
File Modification Timestamp
When you use the Text command on a file, Qedit stores the file's modification
timestamp in the workfile. If you try to Keep the file, Qedit compares the stored
timestamp with the file's current timestamp. If they are different, it means the
original file has changed since you first opened it. Qedit will alert you to the
difference by displaying a message similar to the following:
Warning: Original file has been modified since the initial
Text or last Keep
The file timestamp can change for a number of reasons. Here are few examples:
•
Someone else might have been working on that same file with Qedit
and saved their changes before you did.
•
The file could have been restored.
•
Maybe you used the file to test a program which modified the file in
some way.
Because the timestamp message is just a warning, Qedit continues its processing. It
then asks for Keep confirmation. If you answer "Yes", the file will be purged and
you might lose someone else's changes. Qedit will also store the new modification
timestamp.
If you answer "No", you should compare the contents of the file with your workfile
and decide if it is safe to Keep your changes. This is one way to compare the files:
•
Keep the workfile under a different name
•
Use our Compare bonus program to display the differences between the
original file and the new version you just created
•
Look at the report and separate the lines that you changed from the
ones you did not touch
•
If needed, apply changes to your copy so you are not missing anything
important
By default, timestamp checking on Keep is enabled. If you want to change this
setting, use the Set Keep Checktimestamp command.
If you want to erase the saved timestamp, you can use the Set Keep Name command.
Notes
152 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
You do not need to Keep your Qedit workfile before compiling. Only use Keep when
you need a file as input to software that does not read Qedit files. For example, you
would Keep an IMAGE schema before compiling it (although you can convert
DBSCHEMA to read Qedit files; see the chapter on installation at the end of this
manual).
When you Text a file and Keep it again, Qedit attempts to duplicate the original file.
The form of the Keep file depends upon the current language and Set options,
especially Set Keep and Set Extentsize. To see what the Keep file will look like, use
Verify Keep.
Keep will retain the security of your existing file (including the :Release state and
the ACDs) if you answer Yes to the "Purge old?" question. ACDs (Access Control
Definitions) are a form of security that allows you to say exactly which users can do
what to a file. Keep does not retain the ACDs on MPE V or when purging a remote
file.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 153
:Kill Command [KI/:K]
Kills any or all of the programs that are currently held.
:KILL [ @ | progfile [,entrypoint] ]
(Defaults: most recently used)
When you save a son process (such as SPOOK) after returning to Qedit, you can
awaken it later. The process, and its resources, will not be released until you Exit
from Qedit, even if you never use it. To terminate a son process at any time, you can
use the :Kill command. You can either kill all of your sons, one specified by name,
or the most-recently used one (this is the default). See also Run and Activate.
Examples
/COMMENT Assume that suprtool is already held.
/run suprtool.pub.robelle
{activate Suprtool}
Warning: Held program activated!
>get zz;list;xeq
>exit
Program Held. Use :Activate/:Run to rerun.
/kill
Terminate: SUPRTOOL.PUB.ROBELLE
154 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
List Command [L]
Prints lines of the current workfile, an external file, a spool file, or a Copylib
member, either on your screen or to a printer file.
LIST [$option...] [ rangelist ]
(Default: rangelist = *)
LIST [$option...] filename[,UNN] [ rangelist ]
(Default: rangelist = ALL)
(Q=no linenums, T=template, J=jumping)
If you do not specify a filename, List displays lines of the current workfile. If you do
specify a filename, List displays lines from that file without Shutting your current
workfile. You can refer to the "previous" file by a shorthand method, a "$".
If you specify a single line number as a rangelist and that line does not exist in the
current file, Qedit's action depends on the Set List Nearest setting. If the option is
Off, the default, Qedit displays a No Line warning. If the option is On, Qedit
displays the nearest line. For example, if lines 100 to 120 are missing from a file,
here is what would happen:
/List 100
Warning: No Line
/Set List Nearest On
/List 100
121
This is line #121.
If you are trying to do something similar on an external file, Qedit does not display
anything.
Specify filename,UNN when listing a data file which has numeric characters in the
last 8 column positions and they are not valid sequence numbers.
When you list lines of your current workfile, Qedit shows only the columns within
the current left and right margins, and the default rangelist is the current line (e.g.,
List = List *). When you List an external filename, margins are ignored and the
default rangelist is ALL.
Examples
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 155
/list 5
/listq 5/
{display line 5 only}
{List-Quiet from 5 to Last}
/list "customer"
{all lines containing "customer"}
/list -5/+5
{display current vicinity}
/l r23gl.src
{display entire source file}
/l r23gl.job ]-10/
{print last 11 lines of job file}
/l $ "$page"(1/5)
{"$page" in column 1 of previous file}
/set left 55;set right 132 {set margins in wide file}
/listt all
{show template above columns}
/list "bob"
(upshift)
/list "@UPD@MAST@" (pat)
{"bob","BOB","Bob",etc.}
{strings UPD and MAST both in line}
{pattern matching}
$-Options
You can configure permanent options for the List command using Set List; you can
also select temporary options within a specific List command. The temporary
options are preceded by a dollar sign.
LIST [ $option ... ] [ filename[,UNN] ] [ rangelist ]
The temporary $-options come after the command name and before the external
filename and rangelist.
Here are the $-options accepted in the List command:
156 • Qedit Commands
[$lp | $lpa | $lpb | $record ]
Overrides default output to $stdlist. $lp, $lpa and
$lpb send output to a file with the same name as the
option. $Record sends output to LPCRT=$stdlist via
Record mode.
[$DEVice filename]
The $device option sends output to the specified file
name. If the file name is not equated to a particular
device, the output is sent to that file name. If the file
name is redirected with a file equation (file
filename;dev=printer), then the output is
sent to that device.
[$HEX | $OCTAL | $DECIMAL]
Numeric dump
$CHAR
Remove garbage; combines with Hex/Octal/Dec
$PCL code
LaserJet fonts and orientation
$DUPLEX
Double-sided printing on certain LaserJets
$EVEN | $ODD
Outputs even or odd number of pages
[$COLUMNS (range, ...)]
Lists only certain columns
The $columns option allows you to list only the
contents of certain columns. You can specify up to
four column ranges. The ranges have to be enclosed
in parentheses and can be separated by commas or
spaces.
A range must have a start column and, optionally, an
end column. If only a start column is specified, the
end column is assumed to be the same. In this case,
Qedit lists only one column. For example
/List $columns (5) {lists only the
contents of column 5}
/List $columns (5/10) {lists the
Qedit 5.9 for HP e3000 User Manual
contents of columns 5 to 10}
/List $columns (5 20/30) {lists
column 5 and 20 to 30}
Column numbers must be valid for the Language of
the file. For most files, the first column is 1. For
COBOL-type files, the first column is 7. Column
numbers must also be within the current left and
right margins. The column numbers do not have to
be entered in a particular order. For example, the
column numbers in the first range can be greater
than the column numbers in the second range. The
text appears in range order (i.e., range1, range2,
range3 and range4). The same column can be
included in multiple column ranges. The total
number of columns listed cannot exceed the absolute
line length maximum (8,172 characters).
Although a template Listing is allowed with
$columns, the output might not be very helpful. For
example,
/LT $column (15/20)
+....2
1 O
2 pp
3 QQQ
4 rrrr
List $include is supported with $columns, but
included files are treated as if they are the same type
as the main file. For example, if you include a
COBOL file within a Data file, the COBOL file will
start at column one.
You can specify a rangelist (e.g., a search string
with $columns). Qedit first searches for the string,
which can appear anywhere on the line, then applies
the $columns specification.
$DOUBLE
Double space the listing (or $DBL)
$SHIFT
Shift the listing four spaces to the right
[$RIGHTBY spaces]
Shift the listing to the right by the number of spaces
The $rightby option works like the $shift option. It
allows you to shift the printed output to the right.
The $shift option shifts the output by four spaces.
The $rightby option allows you to specify the
number of spaces by which the output is shifted.
This number can be between 1 and 30.
/List $shift LP {shifts output by
four spaces}
/List $rightby 4 LP {also shifts
output by four spaces}
/List $rightby 20 LP {shifts output
by 20 spaces}
$INCLUDE
List/search $include files as well
$USE
List/search usefiles as well
$COPY
List/search COBOL Copylib files as well
$PAGE [ ON|OFF ]
Override Set List Page option
$LINES count
Override Set List Lines (per page)
$PRE | $POST
Override pre- or post-spacing (default)
$SKIP | $NOSKIP
Override skip (default) or noskip on perf
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 157
Here is an example that uses three of the $-options:
/list $lpa $double $shift all
This command would list all of the current file to the LPA with double spacing, and
the listing would be shifted four spaces to the right. The file LPA defaults to
Dev=LPA, but you can use :file lpa;dev=serialp to redirect it.
When listing an external file, the $-options must come before the file name:
/list $hex $char filename
{hex-char dump of file}
Include Files
Normally, Qedit only searches the current file for a string. If you specify the
$include keyword, however, Qedit will also search the $include files for the string.
/list $include "global_variable"
The lines that specify Include files must begin with either "$", "#", "!", or ".". In SPL
programs, an exclamation point indicates that the rest of the line should be treated as
a comment. So, if a line starts with an exclamation point followed by the word
Include, Qedit also assumes this to be a comment and not an actual Include
statement.
The $include command must be spelled out in full, and it can be indented from the
prefix character ($, #, etc.). The prefix character can be in any column as long as it is
preceded by spaces only. Even though Qedit allows prefix indentation, other
programs such as compilers might require prefixes to be in specific columns e.g.
column 1.
So, as far as Qedit is concerned, the following examples are valid Include source
lines:
$include 'globals.source'
$include constant.srcinc
$
include headers
#include
#include "parser/bnf.c"
!
include somefile
.include
chapter1.book
You cannot combine the $use and $include options.
Usefiles
The $use option is very similar to the $include option. If you specify the $use
keyword, Qedit will also search any usefiles for a string. Usefiles are commonly used
in PowerHouse source code, Qedit and Suprtool command files, and jobs streams
that run Qedit and Suprtool.
/list $use "data.def"
The lines that contain the "use" directive must have the word "use" as the first word
in the line. Leading blanks are allowed. Everything after the word "use" is assumed
to be a file name.
You cannot combine the $use and $include options.
COBOL Copylib
The $copy option is very similar to the $include and $use options. This option works
with files of Language COBOL, COBX or COBFREE. It does not have any effect on
files with other languages.
If you specify the $copy keyword, Qedit scans all the lines in the rangelist for the
word Copy anywhere in columns 8 to 72 (columns 1 to 256 for COBFREE files).
158 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Qedit assumes the next word on the line is the member name. It then looks for an In
or Of clause. If there is one, Qedit uses the next word as the library name. If there is
no In and Of clauses, the library name defaults to Copylib.
Qedit will also search any COBOL Copylib files for a string.
/list $copy 9/10
/list $copy "CUSTREC"
{list all Copylib members found}
{in lines 9 through 10}
{list all lines containing the string}
{also scans Copylib members}
You cannot combine $copy with $use and $include options.
$Device Option
The new $device option is very similar to the $lp, $lpa, and $lpb keywords.
/list $device printer @
The above command opens a file called Printer and sends the list output to it. To
redirect the output from the List command to a printer, you must specify a file
equation to a valid device.
:file printer;dev=laser
/list $device printer
If both the $device and $lp keywords are used, the $device takes precedence.
Configuring Printers
By using :File commands in your Qeditmgr file, you can define LP, LPA and LPB as
three different printers on your system. The default device class is LP, if no file
equation is specified.
:file lp;dev=lp
:file lpa;dev=serialp
:file lpb;dev=33
Merging Options
The $-options in the List command are merged with the Set List options, except that
Set List Record ON applies only to the file LP, not LPA and LPB. The $-options can
be combined wherever they make sense; they can be used with Jumping, Quiet and
Template, and can work on the current workfile or an external file. $-Options may be
shortened (e.g., $h = $hex).
Interrupting a Listing
Press the Control-S key to "pause" the listing for review. Then, press Control-Q to
resume the listing. On newer HP terminals, the Stop key pauses a listing until you
press Stop again. To stop the List command, press the Control-Y key.
Listing External Files
With the List command, you can look at any file on a system to which you have read
access security.
/list catalog.pub.sys
Qedit studies the file and determines whether it has sequence numbers or not. If you
ask for a rangelist of lines, Qedit implicitly numbers a file without numbers. It starts
at line 1.0 and adds the current Set Increment value. If the file has sequence
numbers, Qedit uses them, unless it finds illegal numbers or numbers out of
sequence. It then prints the following message:
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 159
Error: line number out of sequence (001200) - renumbering the rest
The string in parentheses is the incorrect line number. You should make sure it
contains numeric digits only and that it is greater than the number on the previous
line. To check this information, you should text the file using the Unnumbered
option.
After reporting the information, Qedit then assigns new numbers to the lines, starting
with the last valid number and adding the current increment.
Qedit uses this shorthand character to refer to the most recent external file name: "$".
For example,
/list abc.source "$page"(1/5)
/list $ 500/600
Because Qedit uses "LP" as a reserved keyword in this command, you must use a
:File command if you want to list an external file named LP.
/:file xyzzy = lp
/list xyzzy
Listing Temp Files
Normally the List command looks for either a temporary file or a permanent file with
the specified name. To list only a temporary file, append the Temp keyword to the
file name:
/list output,temp
You can append more than one keyword to the file name:
/list filename,temp,unn
Listing Output Spool Files (NM)
On MPE XL 2.1 and later, spool files are now regular files that can be listed in
Qedit. To make this easier, Qedit converts the spool file numeric format (i.e.,
#o1234) into an MPE file name for you. You can omit the "o" if you like.
/showout
/list #o1234
/lqj #456
Pre- Versus Post-Spacing and Skip-on-Perf
If you Text a spool file into Qedit and then reprint it using LQ, you may find that the
file has switched from pre-spacing to post-spacing or from noskip-on-perforation to
skip-on-perf. These are the defaults, and the information to override them is
sometimes hidden in the spool file where Qedit cannot find it. Similar problems may
occur when editing CCTL disc files.
List has the $pre, $post, $skip and $noskip options to deal with these problems.
/listq $pre $lp all
/listq $noskip $rec all
/listq $pre all
{pre-spacing on LP}
{on attached printer}
{on $stdlist}
A program selects these printer options by using a carriage control code. The codes
can be specified in two ways: either through the Fwrite intrinsic, or the Fcontrol
intrinsic (in this case they do not show up when Qedit Freads the spool file). Here are
the four CCTL codes:
Char
Post-spacing
160 • Qedit Commands
""
Dec
Octal
Hex
64
%100
$40
Qedit 5.9 for HP e3000 User Manual
Pre-spacing
"A"
65
%101
$41
Skip-on-perf
"B"
66
%102
$42
Noskip-on-perf
"C"
67
%103
$43
Listing Copylib Members
To display a member of your Copylib file, you just put the member name in
parentheses. You don't need to mention the name of the Copylib itself if you have a
:File command for "copylib". Otherwise just put the file name after the member
name. For example,
/file copylib=copylib.pub.develop
/list (custrec)
/list (custrec) copylib.test.develop
To list the member names in the Copylib, instead of the members themselves,
specify a pattern instead of an actual member name.
/list (b@)
/list (@)
{names starting with "b"}
{all the names}
Quiet Listing and CCTL
LQ means list without showing the line numbers. When you use LQ to list a file that
has CCTL (carriage control), Qedit uses the first column of each line as carriage
control. Thus, Qedit can reproduce application reports which were redirected from
LP to Disc (using :file list = xxx, new; cctl ;dev = disc) with exactly the same spacing
and paging that was used originally. Workfiles may also have CCTL (see Set Keep
and Verify Keep).
Template Listing
The LT command prints a column-number template before the first line of the
listing.
/lqt 5
....+....10...+....20...+....30...+....40...+....50..
training of Qedit users is so easy that you will
Remember that the first column number in a standard COBOL source file is column
7, not column 1. For a COBFREE file, the first column is 1. In addition, if you have
done Set Left and Set Right to define margins for your file, the template starts with
the Left margin column and ends with the Right margin column.
/set left 20;set right 41
/lqt 5
20...+....30...+....40
it users is so easy th
Browsing or "List-Jumping"
When you add "J" to "List" it means list-jumping. This lists the lines specified, but
stops every 23 lines (this pause is handy at 19.2K baud). Browse quickly throughout
a file, viewing as much or as little of each section as you like. The default rangelist
for ListJ is */Last, and ListJ linenum means start jumping at linenum. You can go
into Browse mode quickly from Line mode by using the function keys. Press F6 to
start browsing at the current line, press F5 to browse starting back a page, and press
F2 to roll the screen forward a few lines before starting to browse.
At the end of each screen, ListJ prompts you for "what to do next?" and waits for
your reply. If the user presses Return or F6, or types "yes", Qedit displays the next
screen. If the user presses F8 or Control-Y, or types "no", Qedit stops the listing. If
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 161
the user types a line number, a string, or a relative line count (e.g., -50, +5), or
presses F2, F3, F4, or F5, Qedit moves to a new location within the file. When you
enter any command, Qedit stops the listing, returns to Command mode, and executes
the command. When you are on an HP terminal, ListJ enhances and erases the line
with the "what to do next?" prompt.
You can combine ListJ with the $include option to browse through the specified files
as well as their $include files. You can combine with ListJ with "Q" to display the
lines without sequence numbers. Also, you can combine "ListJ" with "T" to print a
column template at the top of each screen. In fact, you can combine all three options
into "ListJQT" to List-Jump without line numbers, but with a column template.
The screensize can be changed from 23 lines to another number with Set List LJ nn
(where nn is some number of lines from 5 to 100). If you put the command Set List
QJ On in your Qeditmgr file, you can avoid seeing sequence numbers when you
browse.
When List-Jumping reaches the last line of your file, it prints "End! Are you DONE?
[yes]" and waits for your answer. "Yes" ends the listing, and "No" starts listing again
from the beginning. Set List Endstop On disables this question; List-Jumping just
prints the last line of the file and ends the LJ command.
Controlling Printer Listings
When you put "$lp" (or "$lpa" or "$lpb") in a List command, Qedit opens a file
named "LP" (or "LPA" or "LPB") with the device Class "LP." The lines that would
have been printed on the terminal are written to the printer file instead. At the end of
the command, Qedit closes the file, which releases it for printing.
The default Qedit listing to the printer is a raw dump of your lines, with or without
line numbers. It has no page breaks, no headings, no title, and no page numbers.
However, you can override this default with the Set List command.
Listing to Attached Printer
To list to a printer that is attached to your terminal, use List $record. If you want all
listings to $lp to go to the attached printer, do Set List Record On and then List $lp.
Qedit will use Record mode on your terminal or PC to print on the attached printer.
This option opens a file named LPCRT instead of LP.
If you have a LaserJet connected to your PC and are using Reflection, you will want
to Set Printer-Passthru-Conv No in Reflection. Otherwise you will find that some
characters are printing oddly, such as the square block printing as a plus-minus sign.
If you are using Reflection for Windows, the above option may be called "Disable
Printer Translation" or "Use Host Character Set." As well, you have to select
"Bypass Windows Printing" and disable "Auto Form Feed."
You can combine this option with other listing options such as $PCL or $duplex.
You cannot interrupt Record mode with Control-Y, but you can do a soft Reset. This
unlocks the keyboard and causes the rest of the output to appear on the screen. You
can then stop it with Control-Y.
LP Listings with Headings
To have Qedit do a page break every 60 lines and put a heading with a page number
on each page, do List $page On $lp (or $record, $lpa, $lpb). To configure "paging"
as the default, do Set List Page On. Two lines at the top of each page are used as a
heading. The first line contains the page number, the file name (or the last Text file
name in the case of Qeditscr), and the time of the listing, and the second line is
blank.
162 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
In this mode, Qedit also looks for $title, $page, #pragma page, and #pragma title
commands in your file and uses them to create page breaks. The optional string
parameter of these commands replaces the date and time in the page heading (e.g.,
$page "Monthly Staff Review"). A $page or $title command without a string clears
the title area of the heading. The only exception to this processing is an LQ of a
CCTL file; in this case, the carriage control in column one of the file determines the
format of the printer listing, and $page commands are ignored.
To vary the number of lines per page, do List $lines nn, or use Set List Lines nn for a
permanent override, where nn is a value between 1 and 256. (Assumes Set List Page
On.).
/set list page on lines 59
To print the heading only on the first page, use $lines 0. This causes continuous
printing with no page ejects.
/list $lp $lines 0 all
{ignores $page too}
To perform continuous printing with no automatic page ejects but skip to a new page
on $Page directives, use $lines 999.
/list $lp $lines 999 all
{skips to a new page on $page only}
To drop the file name from the page heading, do Set List Name Off. (Assumes Set
List Page On.)
/set list page on name off
To drop the page numbers from each page, do Set List Num Off. (Assumes Set List
Page On.)
/set list page on name off num off
To drop the title from the heading, do Set List Title Off. (Assumes Set List Page On.)
/set list page on title off
To drop the two-line heading from each page while still doing page breaks, use Set
List to disable the three components of the heading:
/set list page on name off num off title off
Getting an Even or Odd Number of Pages
There are times when the number of printed pages is important. For example, you
could have a printer that is always loaded with pre-printed forms that come in pairs
(e.g., Page 1 of 2 and Page 2 of 2) or the paper is folded in certain ways so that a
report is easier to tear up and insert into a binder. In both examples, sending a report
with an odd number of pages would cause the next output to be on a wrong page.
To prevent this from happening, you can now use the $even or $odd options on the
List command and ask Qedit to "round up" the number of pages. The $even option
ensures that the output has an even number of pages. Similarly, the $odd option
ensures there is an odd number of pages by sending an extra page eject sequence
before closing the output file.
These even and odd options are mutually exclusive (i.e., they cannot be both enabled
at the same time). If you try use them both on the same command, Qedit uses the last
one in the sequence. For example, you can type
/List $even $odd $lpa myfile
Qedit does not see this as an error and uses the $odd option, ignoring $even.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 163
These options only make sense if you are sending the list to a printer, either attached
or spooled. They have no effect when listing the file to the screen. For this reason,
you have to specify a destination printer using $lp, $lpa, $lpb, $record or $device.
You can also use one of these options as the default by using the Set List command.
Specifying a $-option on the List command overrides the Set value. There is
currently no way to completely ignore the Set options. If you want both options to be
disabled, you have to issue
/Set List Even Off Odd Off
prior to the List command.
Double-Spaced Listings
When listing to LP, you can force the result to be double spaced with List $double.
This feature can be combined with most of the other features of List, including LT,
LQ, and Set List Page On. To make all printer listings double spaced, do Set List Dbl
On. LQ on a CCTL file disables the Double option because the CCTL codes in the
file control the spacing on the listing.
LaserJet Listings
Qedit has two special options for HP LaserJets: $duplex and $PCL. Duplex means
double-sided printing, and PCL means Printer Command Language, which is used to
select fonts, spacing, and orientation.
$Duplex for Two-Sided Printing. Some LaserJets can print on both sides of the
paper; use List $duplex to enable this option.
/list $lp $duplex all
PCL = Printer Command Language. All LaserJets have several sizes of character
fonts and can print in either landscape or portrait orientation. To help you take
advantage of these features, Qedit has a number of PCL codes that can do all the
work for you. PCL stands for Printer Command Language, which is the HP standard
for printers. To specify a LaserJet option for a single listing, use List $PCL; to
configure all listings, use Set List PCL. To disable the special PCL option, use PCL
0. Get a quick on-line listing of the PCL options with
/hq set,list
Changing Fonts and Orientation
Landscape-Tiny: PCL 1. To list to the LaserJet in the tiny font that prints across the
paper sideways (i.e., 16.67 pitch, landscape), use PCL 1. The number of columns is
automatically increased; you do not need to do any special Rec= on your :File
command.
/:file lp;dev=serialp
/list $lp $pcl 1 all
Landscape-Regular: PCL 2. To list with the regular Courier font in landscape
orientation, use PCL 2. Again, there is no need to specify Rec=.
The Standard: PCL 3. The normal default for LaserJet output is portrait orientation
(across the narrow side) with the Courier font. However, once you insert a font
cartridge into your LaserJet, it may select one of the cartridge fonts as the default
instead of Courier. PCL 3 allows you to select the standard Courier font, even if
another font cartridge is installed.
Portrait-Tiny: PCL 4. Some LaserJets provide the tiny "Line printer" font in
portrait orientation as well as landscape orientation. PCL 4 selects this option.
164 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
A4 Special: PCL 5. To print 80 columns, instead of 77, across A4 paper using the
standard Courier typeface, try PCL 5. This tightens the spacing between characters.
Legal-Landscape-Tiny: PCL 6. To print tiny letters in landscape orientation on
legal-size paper, use PCL 6.
You can combine PCL 1, 2, 3, 4, 5, and 6 with Page On and Off, with Lines 0, with
LQ, with $DBL, with $record, and with $duplex.
Two-Column Listings
If your LaserJet supports "Line printer" font in landscape orientation, you can print
listings across the page with two columns of text side by side.
/list $lp $pcl 10 all {two-column listing format}
/lq $rec $pcl 10 1/200
If you have a legal-size paper tray, you can use PCL 11 to print two wide columns of
110 characters each on a single piece of paper.
A4-Size Paper
Most of the PCL options, with the exception of PCL 5, were designed and tested
with North American letter-size paper. PCL 5 is especially for A4 paper; it reduces
the horizontal spacing between characters so that 80 columns of Courier output can
fit on a single line. In addition, if you add 2000 to a PCL code, Qedit adjusts the
number of rows and columns for that option to match A4 paper. For example, to
print two-up landscape on A4 paper, use PCL 2010 instead of PCL 10.
In general, selecting A4 paper gives you more space along the long dimension of the
paper and less space along the short dimension. If you are happy with the way lettersize rows and columns work on A4 paper, simply do not add 2000 to the PCL code.
If for some reason you want more columns than provided by Qedit (perhaps you are
using a PCL-compatible system printer with wider paper), you can override the size
by using a :File command with the Rec= parameter, as in :file
lp;dev=syslp;rec=-220.
Summary of Qedit PCL Codes
PCL L/P Font
Notes
A4
A4
Letter Letter
Rows Columns Rows Columns
1
L
lp
58
188
60
175
2
L
courier
43
110
45
100
3
P
courier
64
77
60
80
4
P
lp
85
128
80
132
5
P
courier
64
80
60
80
A4-squeeze
6
L
lp
60
223
60
223
legal-size*
10
L
lp
58
95
60
87
two columns
11
L
lp
60
110
60
110
2-up legal*
"standard"
L/P mean landscape or portrait orientation.
* Note: PCL 6 and 11 were designed to print on North American legal-size paper and
will select that size. However, you can see what happens with A4 paper by using
2006 and 2011. Some people have found this useful.
Roman-8 vs. ASCII
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 165
The PCL option requests a Roman-8 character set, but some combination font
cartridges only supply the ASCII character set (half as many characters means twice
as many fonts in a single cartridge). If you ask for landscape Line printer and get
landscape Courier instead, your Line printer font probably has the ASCII character
set instead of the Roman-8 character set. To request an ASCII font, add 1,000 to the
PCL code. For example, if you have a Super Cartridge (55 fonts in one!), use PCL
1001, 1004, 1006, 1010 and 1011. To select both ASCII and A4 paper, add 3000.
Multiple Copies
To produce multiple copies of a listing to a spooled printer, use a :File command. For
example, use these commands to produce three copies:
/:file lp;dev=lp,,3
/list $lp all
The :File command remains in effect until you enter another :File command or
:Reset LP or :BYE.
Redirecting Output to Disc
You can also use :File commands to direct output to a disc file:
/:file lpb = discfile, old; dev = disc
/:build discfile; rec=-80,16,f,ascii
/list $lpb 100/200
166 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Listredo Command [LISTREDO/F7]
The :Listredo command displays any of the previous 1,000 commands.
LISTREDO
[ start [ / stop ] ] [;ABS] [;OUT=file]
[ string ] [;REL]
[ ALL | @ ]
[;UNN]
(Default: display previous 20 commands)
(BJ, F7 and ,, are short for Listredo)
Commands are numbered sequentially from 1 as entered and the last 1,000 are
retained. You can display a single command, a range of commands, all 1,000, or all
the commands whose name matches the string. You can print the commands with
ABSolute line numbers (the default), RELative line numbers (-5/-4), or
UNNumbered. You can write the commands to your terminal or OUT to a temporary
file. If you want to redo any of these commands, see :Do, :Redo, and Before.
Notes
Examples
/listredo
/listredo
/listredo
/bj
/listredo
/listredo
/listredo
/listredo
/listredo
/listredo
/listredo
/listredo
5
5/10
help
{print all Help commands}
{historical shorthand!}
-10
{print last ten commands}
ALL
{print entire redo stack}
purge
{print all Purge commands}
purge xx
{print all "purge xx" commands}
@purge
{print all with "purge" anywhere}
@;rel
{print all, relative numbers}
1/10;out=*lp
{dump commands to printer}
@;unn;out=save {write commands to a file}
Notes
The :Listredo command can be abbreviated to ",," as in MPEX, or to BJ, or can be
invoked by the F7 function key. Using F7 to invoke Listredo only works in Line
mode, not Visual mode. You cannot use ";" to combine commands on the same line.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 167
:Listundo Command [LISTU]
Displays the complete Undo change log of commands that modified text, starting
with the most recent and working backward.
LISTUNDO
Listundo shows the complete Undo change log, including each command, the
number of lines updated, deleted, added, or renumbered by that command, and the
text lines. Text for deleted lines is preceded by an underscore ("_") as in the Delete
command, and the "before" value of lines that were updated has a Greater Than ">".
Commands are printed in reverse order, with the most recent command first. This is
the command that would undone by the next Undo command. To stop the Listundo
report, use Control-Y.
Examples
/listundo
168 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Lsort Command [LS]
Sorts a range of lines.
LSORT range [ KEYS keylist ]
LSORT string range [ KEYS keylist ]
(Q=no display)
(Default: by entire line)
The simplest Lsort command just specifies a range of lines to be sorted and no other
parameters. This means to use the entire line as the key and sort the lines into
ascending order, printing them once sorted.
To stop Lsort from printing the sorted lines, use LsortQ.
Parameters
To sort by some other key fields in the lines (from one to four are supported) or to
sort the lines in Descending Order, you need to specify the KEYS keylist parameters.
The keylist consists of one to four keys separated by spaces or commas, with a key
consisting of either a column range or a starting column and length:
column , length [DESC]
column / column [DESC]
Ascending Order is assumed by default, but you may specify DESC to sort this key
in Descending Order.
Examples
/lsort all
{sort entire file}
/lsortq all
{sort without printing}
/lsort 10/33
{sort some lines only}
/lsort 30/last keys 10,5
{col 10 through 14}
/lsort zz keys 10/20
{col 10 through 20}
/lsort 20/last keys 1,10 20,5,desc {two keys}
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 169
Merge Command [ME]
Merges an external file into the current workfile by line number. Use Merge to apply
source-code "changes-files" containing new and revised text, that are distributed by
some application vendors.
MERGE filename [ (rangelist) ]
(Q=no display, J=Justified)
(Default: rangelist: ALL)
MergeQ suppresses printing of the merged lines.
The optional rangelist specifies a subset of the external file to merge into the current
file.
Examples
/text master.src
/merge changes
{start with the master file}
{update changed lines, add new}
Notes
To make your own "merge file", create a file that contains edits to be applied to your
current workfile. Mark the lines of text that will replace existing lines in your
workfile, with the corresponding line numbers. Give new line numbers to any
completely new lines of text to be added to your workfile. To delete lines in your
workfile, use the $edit Void command of the MPE compilers in the merge file. $Edit
Void removes the line number specified in the command and, optionally, lines up to
and including a Void= line number. Warning: the Void= parameter cannot accept a
decimal point so, for example, you must enter Qedit line 60.1 as 60100. To delete
from line 55 to 60.1, you would use the following:
55
$edit void=60100
Justified
The default is to replace existing lines with the corresponding line from the external
file. The Justified option appends the corresponding line from the external file. Text
is appended immediately after the last non-blank character if Set Work
Trailingspaces is disabled. If Trailinspaces is enabled, text is appended
immediately after the last significant trailing space. If the resulting merged line is too
long for the current length, the merged line is truncated. Let's say the current
workfile contains:
abc
def
ghj
and the external file contains:
1111
2222
3333
A MergeJ would result in:
abc1111
def2222
ghj3333
If the maximum length was 5, the resulting file would be:
170 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/mergej myfile
1
11111
Warning: Result line will be too long.
2
22222
Warning: Result line will be too long.
3
33333
Warning: Result line will be too long.
3 lines merged
/l all
1
abc11
2
def22
3
ghj33
Qedit 5.9 for HP e3000 User Manual
Truncating merged text.
Truncating merged text.
Truncating merged text.
Qedit Commands • 171
Modify Command [M]
Editing characters within lines using either Control codes (default Set Mod Robelle),
D-I-R-U edits (Set Mod HP), or Control codes with visible feedback (Set Mod
Qzmod).
MODIFY rangelist
(Q=no linenum, T=template)
(Default: rangelist = *)
By default, Modify displays the first line and puts the cursor under the first column.
You enter an "edit-line" to specify a changes. You use spaces to move the cursor
under the word you want to change, then type new characters to replace those in the
columns above. For example:
/modify 5
5
Over 2000 computers use Suprtool.
750
5
Over 2750 computers use Suprtool.
{prints line}
{you edit it}
{prints new line}
{end Modify}
Each time you press Return, Modify applies your changes to the line and prints the
new result. This cycle continues until you enter only a Return (no more edits).
You use nonprinting Control codes for editing, such as Control-D to delete. For
visual feedback, do Set Mod Qzmod, which puts your cursor right on top of the line
and responds to each Control code by revising the image on the screen (i.e., ControlD actually makes the character disappear from the screen). If you would prefer to use
MPE-style edits (D-I-R-U) instead of Control Codes, do Set Mod HP to reconfigure
Modify.
To force the line number onto a separate line, use Set Mod Prompt OFF.
Examples
/modify 5/
{modify from line 5 until ^Y or end}
/find "corelate";m {find spelling error and modify line}
/mod "q_flag"
{modify all lines with "q_flag"}
Getting into Modify Mode
There are other commands that invoke Modify mode in Qedit:
•
Change, when a line overflows or you use CJ.
•
Add, when you use the auto modify character from Set Zip.
•
Before, so that you can revise and redo a previous command.
•
Redo, also enables you to revise and redo a previous command.
Edit Functions of Modify
Here are the edit functions of Modify and their Control codes, which may be
changed with the Set Modify command.
Function
172 • Qedit Commands
Key
Purpose
Overwrite
Control-O
Replace characters (default).
Delete
Control-D
Delete characters.
Qedit 5.9 for HP e3000 User Manual
Before
Control-B
Insert characters before a column.
Append
Control-A
Add characters to end of the line.
Divide
Control-V
Divide line in two at this column.
Goof
Control-G
Restart Modify with original line.
Terminate
Control-T
End this edit so you can do another.
Lengthen
Control-L
Same as Append (Control-A).
Insert
Control-^
Same as Before (Control-B).
Advanced
You create Control codes by holding down the Control key while pressing the other
key. Most Control codes are invisible and do not move the cursor. In the user
manual, the symbol (^) as a prefix stands for the Control key (^-D for Control-D).
Some functions combine two of the Control codes: pressing ^-T then ^-V in the first
column of a line splices two lines together (and deletes the second line if it's
emptied). Actions not restricted to column 1 may be performed at any point on the
line.
Function
Key
Col.
Purpose
Splice
^T ^V
1
Fills current line from next line.
Insert Line
^A ^V
1
Adds a blank line before current
one.
Insert Line
^A ^V
Adds a blank line after current
line.
Delete Last
^A ^D
Spaces remove characters at end
of line.
Replace End
^A ^O
Replaces from end of line
(overwrites).
Delete Line
^T ^D
1
Deletes current line.
Overwriting Characters
To overwrite characters in a line, type the new characters underneath the ones to be
replaced. There is no need to type a control character; "overwrite" is the default edit
function. Once you are in Overwrite mode, you can also use the Space bar to erase
the columns that you move through. If you have not yet typed any characters, the
Space bar just moves your column position to the right one place. You can get into
Overwrite mode at any time while in modify by pressing Control-O. Terminate
overwrite mode and go into space- transparency mode by typing Control-T.
Start Over Editing a Line
To correct a Modify mistake, enter the Goof control code (Control-G) and press
Return. Qedit restores the line to its original contents and restarts the Modify cycle.
Control-G does not undo Splits and Splices.
Doing Several Edits in One Line
You can do more than one edit operation in one edit-line if each edit is clearly
separated from the preceding and following ones. When the edits are at different
ends of the line, you must Terminate the first function so that you can move the
cursor right to the next column. The Terminate control code (Control-T) provides
this capability.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 173
The following illustrates where to place your control codes (^ stands for the Control
key), even though they will not appear on your screen. The first example capitalizes
the "r" in "return", then replaces "in error" with "by mistake", which requires
inserting the letters "ke." The second example inserts the word "Goof" and a space at
the start of the line, and deletes the last two words at the end of the sentence, adding
a final period.
/m 13
13
a return. If you do this
R
R<^T, spaces>
13
a Return. If you do this
in
by
by
by
error,
{displays line}
mistake
{^codes are: }
mista<^B>ke
mistake,
{redisplays}
/m+1
14
control code restores the line for you. {displays line}
Goof
.
{^codes are: }
<^B>Goof <^T, spaces>
.<^D, Return>
14
Goof control code restores the line.
{redisplays}
Deleting Characters
To delete characters from the line, starting with the current column position, enter
the Delete control code (Control-D). Then space to the right the number of columns
to be deleted. Any remaining characters in the line are left-shifted to fill in the
deleted columns.
In all cases, the columns deleted are those immediately above the cursor, regardless
of what other functions have been performed previously on the same line. The Delete
function is stopped by the first nonblank character, either Return, a printing character
to switch back into Overwrite function, or another control code.
Erasing the Line
To erase from the current column to the end of the line, enter the Delete control
code, followed by a Return. If you do this by mistake, the Goof control code restores
the line for you.
Inserting Characters
To insert characters in the line before the current column position, enter the Before
control code (Control-B). Then type the characters to be inserted. The existing
characters starting in the insert column are right-shifted to make room for the new
characters.
On the operator's console of certain HP e3000 models,
the Control-B character puts the terminal into "maintenance" mode. In these cases,
use Control-^ instead. If you do press Control-B on the console accidentally, type
"CO" on a Series 800 or 900. On a Micro3000, type "RUN".
Adding Characters to the End of a Line
To add characters to the end of the line after the last nonblank character in the line,
enter the Append control code (Control-A). Then type the characters to be added.
This function is independent of the current column position.
Dividing a Line into Two Lines
The Divide control code (Control-V) splits the current line into two lines at the
current column position. If a line number is available, Qedit moves all characters
from the current column to the end of the line to a new line that is added after the
current line. The Goof function recalls the original contents of the line, but does not
delete the new line (neither does Control-Y). See also Divide command.
Splicing Two Lines Together
174 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
To splice two lines together, you must be on the first column of the first line you
wish to splice. Type Control-T, then Control-V, and quick as a wink, all the
characters from the second line are appended to the end of your current one. Qedit
moves only as many characters as will fit. If all the characters are moved, the second
line, now empty, is deleted. See also the Glue command.
Editing Lines with More Than 80 Columns
To modify long lines (i.e., more than 80 columns), use Set Left and Set Right to
define a slice through the lines.
/set left 55
/mqt *
{quiet, with template}
+....60...+....70...+....80...+....90...+....100..+....
ubsequent Sales Follow-up - Completion Ratio Report
Or use Set Modify Qzmodify, it handles long lines without the need to set margins.
Qzmodify: WYSIWYG
You may want to try Set Modify Qzmodify to replace the normal Qedit modify with
a "visual" modify (What You See Is What You Get). Qzmodify uses the same
Control codes, plus many extensions, but Qzmodify does single-character reads. This
allows it to respond immediately and visually to each keystroke, but means that the
performance is unacceptable over NS, packet-switching LANs, and the DTC. Once
in Qzmodify, type Control-Q for a list of commands.
How to Edit in Qzmodify
In Qzmodify, "what you see is what you get". The cursor rests on the same line as
the text you are editing. If you press any printable key (ASCII code 32 or greater),
that key either replaces the character the cursor was on, or (if Insert mode is on)
inserts the key before that character, moving the rest of line to the right by one
character.
When you initially enter Qzmodify you are in Transparent mode--here, a blank
simply causes the cursor to move one space to the right. Pressing any other printable
character immediately terminates Transparent mode and puts you in Overwrite
mode, so the character replaces the one the cursor is on. The three basic modes are:
Mode
To enter
To exit
transparent
^T
any printable char, ^B, ^O, or ^X
overwrite
^O
^T, ^B, or ^X
insert
^B or ^^
^T, ^O, or ^X
Qzmodify will not allow you to create a line longer than a maximum specified by the
calling program, nor can you accidentally "lose" characters off the right edge when
using Insert mode ... Qzmodify beeps when you try to do something illegal. To edit
Roman-8 characters, use Set Editinput Extend ON.
Editing Commands
Qzmodify has an extensive set of commands, all of which are invoked via control
characters. In this documentation, the symbol ^ means that the following character is
a control character (e.g., ^G is control-G). Control characters may be entered as
lowercase or uppercase letters (i.e: ^g and ^G are identical).
Char Mnemonic
Qedit 5.9 for HP e3000 User Manual
Description
Qedit Commands • 175
176 • Qedit Commands
^A append
Go to end-of-line. Moves the cursor to just after the last character
on the line. If the line is already at the maximum length, the cursor
is placed at the last character.
^B before
Turn on Insert mode. Turns off Overwrite mode. If you enter a
character while in Insert mode, it will be put Before the character
the cursor is on, and the rest of the line will move one to the right.
^^ before
Control up-arrow...synonym of ^B. Use ^^ instead of ^B if you are
on a system console!
^C case
Change case of current character. If the current character is a
lowercase letter, it will be changed to an uppercase letter and vice
versa.
^D delete
Delete character. Pressing ^D will cause the character under the
cursor to be deleted, and the rest of the line to be moved one space
to the left.
^L^D delete end
If the cursor is just past the last character in the line, (i.e., you just
did a ^L or ^A), then the ^D will delete the last character of the
line.
^E erase
Erase to end of line. This will erase all of the text from the cursor to
the end of the line.
^F find
Find next occurrence of character . The cursor will be moved to
the next occurrence of the character to the right of the cursor.
If is not found, you will hear a beep.
^F
Find nth occurrence of where 1<=n<=8.
^G goof
Undo all current modifications. Restores the line of text to its
original form. Note: ^V, ^K, ^T^D, and ^T^V cannot be undone.
^H backspace
Move back one character (nondestructive).
^I tab
Skip ahead to the next tab stop.
^J justify
Deletes blanks from the cursor to the first nonblank (does not delete
that character).
^K add
Requests Qedit to add a line after the current line. The current line
will then be redisplayed for editing and you will get to edit the new
line.
^L lengthen
Go to end-of-line...synonym of ^A. Use ^L instead of ^A if you are
on a Type Ahead Engine (TAE).
^M return
Marks the end of editing a line. Returns the modified line to Qedit.
Note that ^M is the same as Return.
^O overwrite
Initiates Overwrite mode and turns off Insert mode (^B). In
Overwrite mode, if you enter a character, it will replace the one on
the screen.
^P<#>
Moves up or down some number of lines of text. For example, ^P3moves back three lines.
^Q query
Displays list of Qzmodify functions.
^S scan
Find previous occurrence of . The cursor will be moved to the
first occurrence of to the left of the current cursor position. If
is not found, you will hear a beep.
^S
Find nth occurrence of where 1<=n<=8.
^T Transparent
Terminates Insert mode and Overwrite mode. After ^T, if you type
blanks, the cursor simply moves right one space without affecting
the text. Transparent mode is always turned off automatically
whenever a nonblank printable character is entered, then Overwrite
mode is turned on.
^T^D delete
If done at column one, this deletes the entire line.
^T^V splice
If done at column one, this will join the next line to the end of the
Qedit 5.9 for HP e3000 User Manual
current line and display the spliced line for editing. If not a column
one, then is the same as ^V.
^U jUmpback
Move back to the previous tab stop. This is the opposite to ^I. As
an aid to remembering them, ^I is the same as pressing the tab key,
and ^U is just to the left of ^I on the keyboard.
^V split
Split the current line (at the cursor) into two lines and modify both
of them. Note that ^Y restores the text if you decide not to make
the change, but you have to manually remove the second split-off
line.
^X eXamine
Examine (redisplay) the current line.
^Y abort
Terminates modify without changing the current line.
^W Wordproc
Shifts into "word-processor" mode. In word-processor mode, the
next control character is used to select a function. The functions
are:
^W^C
Compress multiple blank spaces to single blank spaces.
^W^D
Delete Word. Deletes from the cursor to the next blank, and then
any following blanks up to (but not including) the next nonblank.
^W^H
Toggles a flag that remembers if you have an HP 110 (or an HP
2640). The flag is needed because the HP 110 knows only a subset
of the "standard" HP 26xx escape sequences, and some of them
incorrectly!
^W^L
Draws a ruled "line"; similar to the ListT command.
^W^N
Toggles Numbered mode. A line-number prefix will be displayed
in front of a line of text only if both of the following are true:- line
numbers have been requested (either via a Modify command from
Qedit or via ^W^N);- the line number was passed to Qzmodify by
Qedit (i.e., you did an Modify command, not an ModifyQ
command)
^W^D
Delete all characters from the cursor up to, but not including,
character . Note: must be a printable ASCII character
(character code > 31). If the cursor is currently on the same , it
is deleted immediately before looking for the first . If is not
found, nothing is deleted.
^W^P
Put the character into the text. This is useful when you want to put
a control character into the text. All nonprintable characters will be
displayed as periods (.), so they will take up one space on the line.
^W^S^D
Downshift all letters from the cursor to end-of-line.
^W^S^U
Upshift all letters from the cursor to end-of-line.
^W^S^T
Reverse the case (e.g., "a" becomes "A" and "A" becomes "a") of
all letters from the cursor to end-of-line.
^W^T
Toggles the Type Ahead Engine (if you have one) through three
states: disabled, enabled, ignored.
^W^V
Prints the version ID of Qzmodify.
^W?
Display the ASCII character code for the character that the cursor is
on.
^W$
Replace the character at the current column position with the
ASCII character whose hexadecimal value is .
Symbols Used in Qzmodify Command List
is any single character. Qzmodify will search for this character. If is ^W,
the search will be for the next word (words are anything delimited by blanks) instead
of for a single character.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 177
<#> is zero or more digits. For example, ^P12+ would mean move forward 12 lines.
^P3- would move back three lines.
is one of: ^A, ^B, ..., ^H and is interpreted as the number 1, 2, ..., 8 respectively.
is a "-" to move "back", or a "+" to move "forward".
is any pair of hexadecimal digits.
Note: When modifying a line longer than 79 characters, some commands (e.g.: ^D,
^B, ^E) will not update any line of the screen display other than the one you are on.
Whenever you want to see an accurate display of your text line, press ^X to refresh
the display. This limitation could be fixed, but only at the cost of slowing down
response time while editing these longer lines.
Note: You cannot use the special keys on an HP terminal (e.g.: cursor keys, insert
char, delete char, clear) because they are designed to either send no characters to the
computer when they are pressed or two characters ... and both of these choices cause
difficult problems on an HP e3000 without a Type Ahead Engine. Thus, these keys
should not be used. If you use them by accident, a ^X will refresh the display of the
line you are editing.
Qzmodify with a Type Ahead Engine
The Type Ahead Engine (TAE) from Telamon can be in one of three states from the
Qzmodify viewpoint: disabled, enabled, or ignored. Each is defined below.
Ignored. Qzmodify will not do anything to either encourage the use, or discourage
the use, of the TAE. This is usually the initial state (see below).
Enabled. Qzmodify will place the TAE in single-character mode at entry, and
restore it to Line mode at exit. This means that the HP3000 won't lose typed ahead
input anymore, and that the special keys (e.g., cursor keys) will work nicely.
Disabled. Qzmodify will disable typeahead (by sending ^A^V to the TAE) at entry,
and enable it at exit. In this mode, the TAE is effectively taken out of the "circuit".
With Qedit, you configure TAE-treatment as part of the Set Modify Qzmodify
command:
Set Mod Qzmodify
{ignore the TAE}
Set Mod Qzmod TAEOFF {TAE exists, disable it}
Set Mod Qzmod TAE
{TAE exists, enable it}
When the TAE is present and enabled, you can use these extra commands:
178 • Qedit Commands
^W^T
Toggles the Type Ahead Engine through three states: disabled,
enabled, ignored.
leftarrow
The HP26xx left-arrow key will move the cursor 1 space to the left.
rightarrow
The HP26xx right-arrow key will move the cursor 1 space to the
right.
up arrow
Move up to the prior line of text, leaving cursor in the same
column. The terminal screen is scrolled DOWN, so the line you
were just editing is moved down 1.
down arrow
Move down to the next line of text, leaving cursor in the same
column. The terminal screen is scrolled UP, so the line you were
just editing is moved up 1.
delete char
Deletes the character under the cursor (like ^D).
insert char
Turns on Insert mode (like ^B).
insert line
Asks Qedit to add a new line after the current line.
Qedit 5.9 for HP e3000 User Manual
delete line
Asks Qedit to delete the current line.
^leftarrow
Moves cursor LEFT to the blank just after the nearest "word" on
the left of the cursor. Valid only if a Type Ahead Engine is present
and enabled. Only available on HP264x terminals.
^rightarrow
Moves cursor RIGHT until it reaches the start of the next "word"
(will not move past current end of text.) Valid only if a Type Ahead
Engine is present and enabled. Only available on HP264x
terminals.
Hpmodify: No Control Characters
Set Modify Hpmodify replaces Qedit's standard Modify in all places with MPE-style
editing (D for delete, I for insert, R for replace, U for undo, > for append, >D for
delete at end, >R for replace at end, and D> for clear). We suggest Hpmodify when
using Qedit over finicky datacomm networks, since it does not require any Control
codes.
Hpmodify Keys - Reference
Directive
Effect
i
INSERT. If text follows the i, this text is inserted in the current line,
starting at the position of the i.
r
REPLACE. If text follows the r, this text replaces the same number of
characters in the current line, beginning at the position of the r.
d
DELETE. Deletes a character from the current line for each d specified
in the edit line. Note that "d d" does not specify a range as it does in
MPE V but simply deletes one character above each d. Multiple d's may
be followed by an Insert or Replace operation.
d>
DELETE. Deletes to the end of the current line from the position
specified by d>. May be followed by an Insert or Replace operation.
>
APPEND. If text follows the >, this text is appended to the end of the
current line. If a > without text is positioned beyond the end of the
current line, then a simple replacement is performed instead.
>d
DELETE. Deletes from the end of the current line, right-to-left. Multiple
d's and Insert and Replace strings may be specified after > .
>r
REPLACE. Replaces characters at the end of the command line. The last
(rightmost) character of the replacement string is at the end of the line.
c
CHANGE. Changes all occurrences of one string to another in the
current line starting at the c. The search string and replace string must be
properly delimited. A proper delimiter is a nonalphabetic character (such
as ' " or /) The substitution is specified as cdelim search-string delim
[replace-string [delim]]. Omitting the replace-string causes occurrences
of search-string to be deleted, with no substitution.
u
UNDO. A single u in column one cancels the most recent edit of the
current line. Using the Undo command twice in a row cancels all edits
for the current line and re-establishes the original, unedited line. If u is
placed anywhere other than column one of the current line, then a simple
replacement is performed. Undo makes sense only if you have a line on
which you have performed some editing that can be "undone."
other
Simple replacement. Any other character (not i, r, d, d>, >, >d, >r, c, or
u) will be put into the current line at the position above where it is
placed, replacing any existing character. Simple replacement also occurs
for the editing characters i, r, c, or > if they are not followed by text; or
if > appears at or beyond the current end of line.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 179
Hpmodify Examples
Edit
180 • Qedit Commands
Action
u
First occurrence undoes the previous edits. The u must be in column
one.
u
Second occurrence undoes all edits on the current line. The u must be in
column one.
rxyz
Replaces the current text with xyz starting at the position of r.
xyz
Replaces the current text with xyz starting at the position of x.
ixyz
Inserts xyz into the current line, starting at the position of the i.
ddd
Deletes three characters, one above each d.
d xyz
Deletes a single character above the d, skips one space, then replaces the
current text with xyz starting at the position of x.
ddixy
Deletes two characters, then inserts xyz in the current line starting at the
position of the i.
dd
Deletes one character above the first d, skips two spaces and deletes a
second character above the second d. It does not delete a range of
characters, making it unlike the MPE V version of Redo.
d d>xyz
Deletes a single character above the first d, skips two spaces and deletes
to the end of the line beginning at the second d, and then places xyz at
the end of line.
>xyz
Appends xyz to the end of the current line.
>ddxyz
Deletes the last two characters from the end of the current line and then
places xyz at the end of the line.
>rxyz
Replaces the last three characters in the current line with xyz.
>ixyz
Appends xyz to the end of the line. In this case, the i command is
superfluous, because > accomplishes the same result. Using >xyz would
be sufficient.
c/ab/def
Changes all occurrences of ab to def, starting at c.
c"ab"
Deletes all occurrences of "ab" starting at c.
cxyz
Replace the current text with cxyz, starting at c. Because delimiters have
not been specified (as they were in the previous two examples), this is a
simple replacement with the four characters.
Qedit 5.9 for HP e3000 User Manual
New Command [N]
Creates a new, empty Qedit workfile and opens it. This can be either an unnamed
extra scratch file or a named workfile. The advantages of a workfile are that you can
instantly Open and Shut it, and that it compresses your data. You can use Text to
make a copy of a Qedit file when you wish to protect the work you have done.
NEW filename [,language [ (size) ]
NEW
(Default: extra scratch, 3200 lines)
Qedit shuts the current file and builds filename, which it then opens for editing. If
you leave out filename, Qedit creates a new extra scratch file and assigns it a number
(1,2,3..) so that you can recognize it in Verify Open and Open ?. Up to eight extra
scratch files are allowed (see also the TextJ command). You can convert a scratch
file into a named workfile at any time by Opening it and doing Shut filename. You
cannot Exit without discarding or saving any edits you have done in an extra scratch
file.
The language defaults to the current Set Lang value, but can be overridden. This is
useful for forcing creation of a Jumbo workfile in Qedit/MPE by doing "new
abc,data."
If you want to force creating a Wide-Jumbo format, you should set the Length to a
value larger than 1,000 before issuing the New command.
/Set Length 2500
/New newwork
These commands create a new permanent workfile called Newwork. If you want to
create a new scratch file, enter the New command by itself.
The optional size specifies the number of lines you expect to add to the file. The
minimum size is 200 lines, the default is 3200 (see Set Work for increasing or
decreasing the default size), and the maximum is either 65,535 or 99,999,999.
Examples
/new
/new memos
/set lang job
/add
{create an extra scratch file}
{create an empty file named Memos}
{define file as 80-column records}
/new forbig,data (100000)
/new frankie(500)
/aq 1=johnny
{Jumbo workfile}
{build Frankie for 500 lines}
{memos was shut automatically}
Building Workfiles with Text
You can also create new workfiles while doing a Text command.
/text johnny
/shut frankie
or...
/t frankie=johnny
{copy Johnny file into Qeditscr}
{save Qeditscr as Frankie file}
{build Frankie file ...}
{and copy Johnny into it}
The advantage of this method over New is that Qedit ensures that the size of the new
workfile is always large enough for the external file, plus room for expansion. When
you create the workfile with New, you may not build it large enough to hold a file
that you Text into it later.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 181
Open Command [O]
Instantly opens or reopens a Qedit file for editing or browsing, as opposed to the
Text command which creates a copy of a file for editing.
OPEN
filename[,BROWSE|DEFER|NODEFER]
*
*-n
?
(Default: edit primary scratch file)
Qedit shuts the current workfile and opens filename. The filename must exist (see
New and Text) and must be a Qedit workfile or scratch file. You cannot Open a
Keep file - you must first Text it into a scratch file.
Open filename,Browse opens a workfile for browsing in Qedit. You can use the List
command, including List-Jumping, Hold, Visual mode HH and ZZ, and any other
functions of Qedit which do not modify the file. Open-Browse protects you from
making unplanned changes to a file.
If you try to Keep the file with its original name i.e. you enter a Keep without a
filename, you will get an error.
/Open workfile,browse
/Verify Keep
Set Keep Name txtfile
/K
File opened with Browse, please specify a Keep file name
You can still force a Keep by specifying an explicit filename as in:
/Open workfile,browse
/Keep txtfile
TXTFILE.DATA.ACCT,OLD 80B FA # of records=16
Purge existing file [no]? y
Open filename,Defer opens the workfile without write access, but acquires write
access later if you attempt to modify the file. Set Open Defer On makes Defer the
default and Open filename,Nodefer overrides that command.
It is important to remember that certain workfile attributes and settings are normally
saved when the file is opened with write access. Some of these settings are the ZZ
marker, the current line marker (*), and a new default Keep name modified with Set
Keep Name. If you open a workfile in Browse mode, these settings are not updated
unless the file is re-opened with write access.
To reopen the file most recently accessed, do open *; for the file before that do
open *-1, then open *-2, and so. To select from a list of recently accessed files,
do open ?.
Examples
182 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/open mail
/c "stop"start" @
/open *
/list all
/open ?
/visual
/open *-1
/list "function"
/open *-2
/hold 400/500
/open
{want to edit Mail}
{reopen previous file}
{select a recent file}
{select file before last}
{select file before that}
{edit scratch file}
Notes
Since you must Open a file before editing, any command that requires an Open file
prompts you for the filename if none is Open.
If you attempt to Open a file which is not a Qedit workfile, you see a message
similar to the following:
/open qpart2
QPART2 Error: you can only Open Qedit workfiles (code=111)
You need to Text this file, not Open it.
The Open Stack
Qedit maintains an Open-Stack of the ten most recently Opened files. One of these is
always reserved for the primary scratch file. You can have up to eight extra scratch
files (see TextJ and New), which take priority over named workfiles in the OpenStack. To reopen one of these files, do an open ? command. Open ? prints the list
and prompts for a relative file number, starting with zero for the most recent (same
as Open *).
Open *-n allows you to open one of the recently accessed files directly. Open *2 opens the third file in the list, since zero is the first.
When you open any file it moves to the top of the list and the other files are pushed
down one position. The Close command shuts the current workfile and removes it
from the list of recently accessed files. This is useful to stop desired file names from
dropping off the bottom of the list. If the file is a scratch file, you are prompted to
Discard Changes.
Set Open Defer On
If you use Set Open Defer On, the Open command does not acquire write access to a
workfile until you make a change to it. The workfile is opened with read access by
default, unless Qedit knows you are going to be writing to it (as when Text or Add
force an Open). If you only browse through the file, the Last-Mod date does not
change. This includes full-screen mode viewing. However, if you make any changes
to the file or use Set Left/Right/Length /Lang, Qedit reopens the workfile with write
access.
It is important to remember that certain workfile attributes and settings are normally
saved when the file is opened with write access. Some of these settings are the ZZ
marker, the current line marker (*), and a new default Keep name modified with Set
Keep Name. If you explicitly open a workfile in Browse mode or use Set Open Defer
On, these settings are not updated permanently unless the file is re-opened with write
access.
You can override the current Set Open Defer value by doing Open filename,Defer or
Open filename,Nodefer.
There are a few error conditions that may occur if you attempt to modify a file
because now someone else can edit the file while you have it open. For example, you
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 183
cannot obtain write access if someone else already has write access to the file. In
Visual mode, you may see the error "Unable to reopen file with write access.
Concurrent usage/backup?".
If "Error: EXCLUSIVE VIOLATION: FILE BEING ACCESSED" appears when
you try to open a file, it means that either someone is editing the file or it is being
backed up.
If you are working in Visual mode, someone can delete the lines you want to edit
after Qedit has displayed them on your screen. If this happens, Qedit does not update
your screen and displays this error message: "File has changed since page last
displayed. Another user?"
Crash Recovery
Qedit ensures the validity of workfiles after a system crash or program :Abort. It
checks to see whether the file was properly closed the last time. If the file was in the
midst of Renumber, Qedit completes the renumber. If the file was in the middle of a
Text, Qedit clears the file so you can do the Text over again. In all other cases, Qedit
prints a RECOVERY warning and searches through the file to eliminate any
duplicate lines. After a RECOVERY, examine the area of lines that you were last
editing. A few lines may be missing or out-of-date, but that is all. If a workfile is
ever damaged, use the Serial option of QCOPY to recover the file.
File Modification Timestamp
When you use the Text or Keep commands on a file, Qedit stores the file's
modification timestamp in the workfile. If you Shut the workfile to do something
else, the next time you Open it, Qedit will compare the stored value with the file's
current timestamp. If they are different, it means that the original file has changed
either since you last worked on it or since the last time you saved your changes.
Qedit will alert you to the difference by displaying a message similar to the
following:
Warning: Original file has been modified since the
initial Text or last Keep !
The file timestamp can change for a number of reasons. Here are few examples:
•
Someone else might have been working on that same file with Qedit
and saved their changes before you did.
•
The file could have been restored.
•
Maybe you used the file to test a program which modified the file in
some way.
Because the timestamp message is just a warning, Qedit continues its processing.
However, if you want to be sure you are not missing important data, you should
compare the contents of the file with your workfile and decide if it is safe to continue
editing your copy.
This is one way to compare the files:
184 • Qedit Commands
•
Use Verify Keep and write down the default Keep name
•
Keep the workfile under a different name
•
Use our Compare bonus program to display the differences between the
original file and the new version you just created
•
Look at the report and separate the lines that you changed from the
ones you did not touch
Qedit 5.9 for HP e3000 User Manual
•
If needed, apply changes to your copy so that you do not miss anything
important
It is important to remember that certain Qedit commands will shut and open
workfiles on your behalf. The timestamp warning might appear when you do not
expect it.
By default, timestamp checking on Open is disabled. If you want to change this
setting, you can use the Set Open Checktimestamp command.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 185
:Pause Command [PAUSE]
The Pause command has two uses: to suspend Qedit for a specified number of
seconds, or to print a prompt message on the screen and wait for the user to press
Return. If the parameter is numeric, Pause does a timed wait. If the parameter is not
numeric, it is used as the prompt message and a wait for user Return is done instead.
The Pause command is handy in usefiles to provide time for the user to read the
screen before continuing.
:PAUSE [ seconds | message ]
(Defaults: read without a prompt)
The message is not in quotes and is separated from the command name by a single
space.
Examples
/pause 5
{wait for 5 seconds}
/display To get out of Suprtool, type Exit
/pause Press Return when ready to try Suprtool.
/run suprtool.pub.robelle
186 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Prep Command [PREP/:P]
Converts the object code in a USL file into a "program file". USL files are produced
by compilers. Program files are what you execute in the :Run command.
:PREP [ uslfile ] [ ,progfile ] [ ; ]
[ STACK words ]
[ MAXDATA words ]
[ DLSIZE words ]
[ RL rlfile ]
[ CAP caplist ]
[ PMAP ]
[ QMAP ]
[ LP ] {map to printer}
[ PATCH words ]
[ ZERODB ]
[ FPMAP ]
[ NOFPMAP ]
[ YES ]
[ NO ]
[ NOSYM ]
[ CHECKSUM]
(Defaults: uslfile = $oldpass,
progfile = $newpass;
see Set MAXDATA for default;
see Set RL for rlfile)
The parameters to :Prep are the same as in MPE. Keyword parameters can, of course,
occur in any order. In Qedit, all parameters including file names are optional. Most
of the parameters may be shortened to a single letter.
uslfile
USL file produced by the compiler (default = $oldpass).
progfile
PROG file produced by the :Prep (default = $newpass).
STACK
specifies starting dynamic stack (seldom needed).
MAXDATA
specifies largest stack size (MPE expands).
CAP
specifies capabilities (example: CAP IA BA PH MR).
PMAP
causes a procedure map to be printed.
QMAP
causes the PMAP to be reorganized into a more readable report;
procedures are put into alphabetical order and a segment-size histogram
is added. QMAP;LP directs the QMAP to the line printer (QMAPLIST).
The program Qmap.Pub.Robelle must be on the system.
LP
causes the PMAP or QMAP to appear on the printer.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 187
PATCH
reserves a specified number of words at the end of each code segment
for patches.
ZERODB
sets uninitialized global stack locations to zero.
FPMAP
writes a copy of the PMAP into the program file for debugging.
NOFPMAP
does not write a copy of the PMAP into the program file for debugging.
YES
purge any existing program without asking permission.
NO
do not purge any existing program file.
NOSYM
does not write the symbol table into the program file.
CHECKSUM
writes checksum information to the program file.
Examples
/open src
/modify ...
/cobol *
/prep
/run
{open source file}
{make some changes}
{compile it, with code to $newpass}
{prep $oldpass,$newpass}
{run $oldpass and see if it still works!}
/prep ,pf
{prep $oldpass into the file pf}
/prep;c mr lp
{prep with cap=mr and send pmap to printer}
Notes
If the program file already exists and it has CODE of "PROG", Qedit asks whether
you want to purge it. If you answer NO, Qedit cancels the :Prep. After the :Prep,
Qedit saves the program file, even if a nonfatal error occurs.
To send the QMAP to a disc file, use these commands:
/purge discfile
/build discfile;rec=-80,16,f,ascii
/file qmaplist=discfile,old;dev=disc
/prep uslfile,progfile;qmap
{do not use LP}
/list discfile
188 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Proc Command [P]
Calls an external subroutine and passes it lines to examine, update, delete, or split.
Qedit has two built-in routines to downshift and upshift lines, DOWN and UP.
PROC
[name] [ S|P|G|PP|PG ] [ rangelist ]
[ DOWN | UP ]
(Q=reset workspace)
(Defaults: previous proc)
Except when name is one of the built-in routines (DOWN, UP), name must be a
procedure in an SL file to be dynamically loaded and then called. If you omit name,
PRoc calls the most recent procedure name (at startup this is DOWN). The procedure
is only actually "loaded" the first time you mention it. Qedit keeps the procedure
loaded as long as it can. Since DOWN and UP are part of Qedit, they need not be
loaded from an SL, nor can they be unloaded. Use Verify Proc to list the current
procedures.
Maximum
Set Limits Proc n determines the maximum number of procedures which Qedit will
keep loaded for you at a time. The default is four. When you exceed the limit, Qedit
unloads the one least-recently used. Normally, Qedit unloads procedures when
needed to make room for new routines that you have asked to load. However, if you
are using an Interface routine also, Qedit does not unload any of your procedures.
That is because Qedit allows you to combine interface routines and Proc routines in
the same routine and install both with a single Loadproc. The Qedit display will
show that the Proc is gone, and you will no longer be able to call it, but it will not be
unloaded. You will not be able to purge it from the SL unless you Exit from Qedit.
Proc passes each line of the rangelist to the procedure and updates the line upon
return. If you omit rangelist, Proc passes a dummy line with all blanks and line
number of " ? " instead; this allows you to call procedures without having a workfile
Open.
For DOWN and UP, the default rangelist is the current line (*); PQ shifts quietly
(i.e., without printing the lines); and PJ shifts with user verification (i.e., PJ prints
each shifted line and asks you to approve it).
The library search options for the Proc command are as follows:
PROC procname S
Sl.Pub.Sys only
PROC procname P
logon Sl.Pub then Sl.Pub.Sys
PROC procname G
logon group, then Sl.Pub, then Sl.Pub.Sys
PROC procname PP
Sl.Pub in Qedit program account
PROC procname PG
SL in Qedit program account and group
Built-In PROCs to Shift Up or Down
The Up and Down Procedures put Roman-8 characters into uppercase or lowercase if
Set Editinput Extend is On. Otherwise, they only operate on A-Z and a-z.
The first time that you use Down or Up after running Qedit, they ask you to
configure them. There are 4 options: 1 means to shift every alpha character in the
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 189
lines, 2 means to skip over characters enclosed in double quotes ("), 3 means to skip
over characters enclosed in single quotes ('), and 4 means to skip over characters
enclosed in either double quotes or single quotes. If Down (or Up) finds a line with
unmatched quotes, it prints a warning and stops (unless the lines are part of a
COBOL program, in which case unmatched quotes are okay).
/open qedit.doc
{open document file}
/list 415.1
{display a line}
415.1
You will need to Purge the old file.
/proc down 415.1
{try it lowercase}
Set Shift DOWN? 1(@) 2(") 3(') 4(" or ') [0]:2
415.1
you will need to purge the old file.
/proc up 415.1
{try it uppercase}
Set Shift UP? 1(@) 2(") 3(') 4(" or ') [0]:2
415.1
YOU WILL NEED TO PURGE THE OLD FILE.
/proc down
{lowercase is better}
/proc 410/415
{downshift some more lines}
/pq 420/1002
{many more! quietly}
/pj up 1003
{upshift with approval}
1003
>GET D-LINE (Okay?) yes
If you always configure the shifting routines to the same option (e.g., skip strings
with double quotes), you can use Set Shift to define the configuration:
/set shift down 2 up 2
User-Written PROCs
Besides the two built-in PROCedures UP and DOWN, you can invoke any number
of user-written PROCedures from SL files (four of these can be loaded at one time).
The QLIB contributed library contains two PROCedures: FINDJUNK to remove
nonprinting characters from lines, and NEATER to align COBOL fields to specific
columns. The easiest way to use them is to copy SL.QLIB into your logon account
and/or group:
/:run fcopy.pub.sys
>from=sl.qlib.robelle;to=sl;new
>exit
/open memos
{open document with junk in it}
/proc findjunk,g,first/10 {cleanup start of current file}
/proc 1/50
{cleanup some more lines}
/p findjunkq,g,51/last
{cleanup the rest quietly}
/:qhelp qlib.help.robelle,contr,findj
{check manual}
/open cobsrc
{open a cobol source file}
/p neater40,g,12.3/14
{adjust some data division}
/:qhelp qlib.help.robelle,contr,neater
/p findjunk 2.1/2.4
{remove some phone junk too!}
For detailed instructions on coding user procedures, consult the index.
190 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Q Command [Q]
Prints a message on $stdlist.
Q [ "string" ]
(Default: print a blank line)
The string of up to 80 characters is printed on $stdlist.
Use the Q command to print prompts from usefiles. This works especially well when
you use a file quietly.
Q can be used to include comments in batch mode. Use :COMMENT in usefiles for
a nonprinting comment line.
Examples
Below is a usefile for compiling and preparing a large SPL program. The program
reports to the user as it progresses. Because these commands may take a long time to
complete, the last line is a Q command to wake us up by ringing the Bell.
Q "This usefile compiles/preps Suprtool."
Q "First we Shut your Open workfile, if any."
shut
:COMMENT Purge any existing USL file. Will build new one.
:purge suprtool.usl
:COMMENT Use Segment Stdin= commands to init new USL file.
:run segdvr.pub.sys;stdin=toolseg.job
:COMMENT Save new USL file.
:save suprtool.usl
:COMMENT Drop security; we need access from many accounts.
:release suprtool.usl
:COMMENT Compile all source modules into USL file.
Q "USL file initialized for Suprtool."
:spl commag1.suprtool,suprtool.usl
:spl commhr1.suprtool,suprtool.usl
:spl commsz1.suprtool,suprtool.usl
:spl main1.suprtool, suprtool.usl
:spl open1.suprtool, suprtool.usl
:spl sort1.suprtool, suprtool.usl
:spl util1.suprtool, suprtool.usl
Q "All Suprtool source modules compiled."
:COMMENT Nested usefile to do the Prep command.
use prep.suprtool
:COMMENT Finally, use Q command to ring Bell on user terminal.
Q "Suprtool :prep is Done! ..."
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 191
/Qedit Command
When you execute a command file (or a UDC) from within Qedit, you can also
include Qedit commands in the command file by preceding the Qedit commands
with a slash (for example,/find "text").
/command line
(Defaults: none)
Qedit allows you to include Qedit command lines within UDCs and command files.
You can check the result of the /Qedit command by testing CIERROR:
setjcw CIERROR = 0
continue
/open abc.source
/find "def"
if CIERROR=0 then
/delete *
else
if CIERROR=860 then
display Invalid syntax in Qedit command!
else
if CIERROR=900 then
display End of file - string not found!
else
if CIERROR=907 then
display Non-existent file!
endif
endif
endif
endif
As this example shows, the /Qedit command returns one of three CIERROR values:
860 = Illegal Keyword
907 = Non-Existent File
900 = End Of File (returned by Find and Findup)
Note that these CIERROR values are only set when the commands are being
executed from a User Command, not from $stdin or a usefile.
INSIDEQEDIT JCW
You can test whether your command file is being executed by Qedit by having it
check the INSIDEQEDIT job control word, so as to only execute /Qedit commands
while inside Qedit.
192 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Qhelp Command [QHELP]
Invokes the QHELP subsystem on a specified help file. QHELP is a part of QLIB,
the Robelle contributed library. The helpfile must have been processed by
HELPCOMP.QLIB. The keyword parameters must be separated by commas, since
blanks are allowed in a single keyword.
:QHELP helpfile [,keyword,...]
(Defaults: no keyword = start at top)
Examples
/qhelp qlib.help.robelle
/qhelp suprtool.help.robelle,commands,base
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 193
:Redo Command [REDO]
Enables you to modify and repeat any of the previous 1,000 command lines.
REDO [ start [ / stop ] ]
[ string ]
[ ALL | @ ]
(Default: redo the previous command)
The :Redo command allows you to modify the commands before it executes them. If
you don't need to change them, use the :Do command. Commands are numbered
sequentially from 1 as entered and the last 1,000 are retained. Use the :Listredo
command to display the previous commands. You can redo a single command, a
range of commands, or the most recent command whose name matches a string.
The :Redo command uses MPE-style commands (D, I, R, U and >) to modify a line.
The following are some common commands. A complete list of commands appears
at the end of this section. The default mode is to replace characters. To delete, type
DDDD under the characters to be removed. To insert, type I under the insertion spot,
then the new characters. To undo your changes, type U. To append to the end of the
line, use >xxx. To delete from the end of the line, use >DD. To replace at the end of
the line, use >Rxxx. And to erase the rest of the line, use D>. See below for a
complete list of edits.
Examples
/listf @.soruce
NON-EXISTENT GROUP.
/redo
listf @.soruce
our
listf @.source
/listredo all
/redo 5
/redo
/redo -2
/redo 8/10
/redo -10/
/redo purge
/redo purge temp
/redo @temp
{"source" is not spelled right}
(CIERR 908)
{redo most recent command}
{last command is printed}
{you enter changes to it}
{edited command is shown}
{you press Return}
{redo
{redo
{redo
{redo
{redo
{redo
{redo
{redo
5th command in stack}
previous command}
command before previous}
8th through 10th}
-10 through last}
last Purge command}
last "purge temp"}
last containing "temp"}
Notes
The :Redo command can be abbreviated to "," as in MPEX, but you cannot use ";" to
combine commands on the same line. You can, however, stop a Redo ALL using the
Control-Y key. To save more commands, use a :File command on the file Qedredo
before running Qedit:
:file qedredo;disc=5000
:run qedit.pub.robelle
Editing in :Redo
:Redo uses the same edits as the MPE/iX :Redo command, except that control
characters in lines are printed as dots "." so that you can see them. Use Set Modify
Hpmodify to select these MPE-style edits for all commands. If you prefer the Qeditstyle edits, use Set Modify Robelle to select Qedit editing for all commands,
194 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
including :Redo. If you prefer Qzmodify, use Set Modify Qzmodify to select
Qzmodify editing for all commands.
Persistent Redo
Redo commands can be saved in a permanent file and can therefore be used from
another session. You can use the Set Redo command to specify a file name to save
your redo commands. Please see the Set Redo command for details.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 195
:Reflect Command [REFLECT]
Executes a Reflection command on your PC. Qedit checks whether the command
succeeds or fails. A failure is treated like the failure of an MPE command. :Reflect
allows you to control a PC from within your HP e3000 UDCs or batch job (send and
receive files, backup your PC, execute PC programs, etc.).
:REFLECT reflection command
(Defaults: none)
Examples
/reflect type mreport.crt
/reflect shell lotus
Version of Reflection
The :Reflect command depends on Reflection's ability to accept commands using an
escape sequence, and to be able to pass back a status code indicating whether the
command succeeded. These features are implemented in the following versions of
Reflection:
•
Reflection 1 for DOS version 1.40 or later
•
Reflection 3/7 for DOS version 1.55 or later
•
All versions of Reflection for Windows
•
All versions of Reflection for Macintosh
Batch PC Control
You can use the :Reflect command in a batch job, but you must do a :File equation to
specify the PC that you wish to control. The file name is Qedcrt and you must
redirect it to a hard-wired PC port. If you wish to switch to another PC, use Set Vis
Stop and another :File command. Here is an example:
!job pcbackup,user.acct
!file qedcrt;dev=29
!run qedit.pub.robelle
reflect dir
continue
reflect dri
{oops}
Your Reflection command failed.
10 = ERROR-CODE from the Reflection PC.
UNKNOWN COMMAND NAME.
(CIERR 975)
file backup = backup.wade
continue
reflect backup c:\*.* /S
set vis stop
file qedcrt;dev=58
file backup=backup.rockey
continue
reflect backup c:\*.* /S
exit
!eoj
{need Reflection PLUS option}
{prepare to access 2nd PC}
{define second PC}
{add /C for full backup}
Debugging PC Errors
The examples above show PC functions with and without error control. If you want
the job to continue, even if the :Reflect command fails, put a :Continue in front of
196 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
each :Reflect command. The error CIERROR 975 will be returned if the :Reflect
command fails for any reason.
Remember, in order to get :Reflect to work in batch:
•
The PC must be turned on.
•
Reflection must be running.
•
The Reflection baud rate must be the same as in the MPE
configuration.
•
The PC must not be logged on to the HP e3000.
•
For the Backup command to work, Reflection must be a Plus version.
If the :Reflect command fails, Qedit will display the Reflection error-code. If you
have a version of Reflection that is capable of passing back the error-code, Qedit will
also put the error-code in a JCW named QEDPCERROR. For an explanation of
Reflection error-codes, refer to the Reflection Command Language reference
manual.
Using Line Mode
Some Reflection command files work fine when executed from the Alt-Y command
line, but fail (possibly leaving your terminal in a locked state) when invoked with
Qedit's :Reflect command.
The reason is that Qedit's :Reflect command sends an escape code to Reflection to
invoke the command. Then Qedit waits for Reflection to send back a status code to
indicate when the command is finished. While Qedit is waiting for the result code
from Reflection, it isn't capable of executing other Qedit commands -- it's already
executing a Qedit command! The only thing that Qedit is capable of doing while it's
waiting is to execute any MPE commands that Reflection might send to the HP
e3000. The reason MPE commands must be accepted is that Reflection sends a :Run
command for PCLINK whenever a file transfer is requested.
As long as the command or command file doesn't attempt to transmit any data to the
HP e3000, :Reflect will probably work the same way as Alt-Y.
For example, here is a Reflection command file that works from Alt-Y, but not from
:Reflect.
; BYE
; This command file gets me out of Qedit, logs me off
; the HP e3000 and exits from Reflection back to DOS.
;
transmit "exit^M"
wait 0:01:00 for "^Q"
transmit "yes^M"
wait 0:01:00 for "^Q"
transmit "bye^M"
wait 0:01:00 for "CONNECT"
wait 0:00:05
hardexit
Also see the chapter "Qedit Issues and Solutions" for more information.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 197
Renumber Command [REN]
Renumbers a range of lines or the entire workfile.
RENUM
[ firstline ] [ maxincr]
[ startline / stopline ] [ maxincr ]
(Default: entire file from 1.0 by current increment)
If you specify a range of lines (e.g., 101/102), Qedit spreads out the line numbers in
that range to allow as much space as possible between each line. The numbers of the
startline and stopline are not changed.
If you do not specify a range, Qedit renumbers the entire file, starting at 1.0 or from
the optional startline value.
If you specify a maxincr value, Renum will attempt to renumber with that increment.
If it must use a smaller value, it will print a warning. If you do not specify a maxincr
value, Renum attempts to use the current Set Increment value which defaults to 1.0
(except for standard COBOL which is 0.1).
Examples
/ren
{assign new numbers to all lines}
/list 10/11
{show current line numbers}
10
The Renumber command
10.2
has two basic modes:
10.21
1. renumber an entire file
10.211
2. spread out a range of lines
11
to make room for new lines.
/add 10.21
{attempt to add a line}
Out of line numbers. Suggest Renumber.
/ren 10/11
{spread out line range evenly}
/list 10/11
{check new lines numbers}
10
The Renumber command
10.2
has two basic modes:
10.4
1. renumber an entire file
10.6
2. spread out a range of lines
11
to make room for new lines.
/add 10.4
{now you can add some lines}
10.5
(usually from 1.0 by 1.0).
10.51
//
Notes
If you keep adding new lines at the same spot in a file, Qedit will assign incremental
line numbers such as 3.01, 3.011, but it cannot add a line between 3.011 and 3.012.
The smallest increment between lines is 0.001. When you run out of line numbers,
Qedit warns you. You can Renumber a range of lines or the entire file to get around
this problem.
198 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Replace Command [R]
Replaces lines with new text, either from Stdinx or from the Hold file.
REPLACE [ $HOLD ] rangelist
(Q=no printing, T=template, J=justified)
(Default: rangelist = *)
Replace $hold looks for new lines of text in the Hold file (see the Hold command)
and uses each to replace one of the lines of the rangelist. Replace without $hold
prints each line of rangelist, then waits for you to type a new line at the keyboard.
Pressing Return only erases the line! Replacej indents the new line the same
number of columns as the original line. $Hold can be abbreviated to $h.
Examples
/rq $hold 50/70
{replace from the Hold file}
/rq $h 50/70
{replace from the Hold file}
/rep 5
{replace line 5 only}
5
LINE 5
{prints existing contents}
5
NEW LINE 5 {prompts you with linenum}
Column Editing with $Hold
You can use the $hold option of the Replace command to do extensive column
editing:
/lt @
....+....10...+....20...+....30...+....40...
1
*****************
2
*
Page One
*
3
*****************
4
*****************
5
*
Page Two
*
6
*****************
/holdq 4/6
{hold the second page of text}
/deleteq 4/6
{now delete those lines}
/set left 20
{set your left margin to starting column}
/repq $hold 1/3 {overlay from the Hold file}
/set left 1
{don't forget to reset left margin}
/lt @
....+....10...+....20...+....30...+....40...
1
***************** *****************
2
*
Page One
* *
Page Two
*
3
***************** *****************
You can copy columns of text from one position in a line to another by setting
margins with the Set Left and Set Right commands, holding the columns of text that
you want to copy, setting new margins, and replacing the new column range with the
text in the Hold file. Here is a command file that works on MPE V and MPE/iX
which does all this for you:
COPYCOL.CMD.SYS
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 199
parm fromcol,tocol,length,rangelist
/set right
/set left
setjcw right := !fromcol + !length
setjcw right := right - 1
/set right !right
/set left !fromcol
/holdq !rangelist
setjcw right := !tocol + !length
setjcw right = right - 1
/set left
/set right !right
/set left !tocol
/replaceq $hold !rangelist
/set right
/set left
For example, to copy text from columns 1/5 to column 30 in all lines, you would
enter:
/copycol 1 30 5 @
200 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Return Command [RETURN]
Return is valid only in a UDC or command file; it exits at once, but returns a
successful status rather than an error. Control returns to whatever invoked the User
Command, which may be Qedit or may be another UDC or command file. Use
:Return within an If or Else clause to get out. It can not be used at the Qedit prompt
or in a Use file.
:RETURN
(Default: none)
Examples
if cierror = 999 then
return
endif
See also the :Escape command.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 201
:Run Command [RU/:R]
Executes a program without leaving Qedit; returns to Qedit when done.
:RUN
[ progfile ] [ ,entrypoint ] [ ; ]
[ STACK words ]
[ MAXDATA words ]
[ DLSIZE words ]
[ LIB [G|P|S] ]
[ PARM value ]
[ DEBUG ]
[ LMAP ]
[ [NO] HOLD ] {suspending programs}
[ NOPRIV ]
[ NOCB ]
[ INFO "string" ]
[ STDIN file ]
[ STDLIST file ]
[ PRI CS | DS | ES ]
[ QINPUT filename ]
[ NOSTOP ]
[ XL "filelist" ]
[ UNSAT procname ]
(Defaults: progfile = $oldpass;
see Set Lib for Lib;
Parm value = 0;
Info string = null)
The parameters to :Run are the same as in MPE. The main difference is that, in
Qedit, all of the parameters are optional, the parameters can be shortened, and
commas and semicolons are only needed when they hold the place of a missing
parameter. Here are the :Run parameters:
202 • Qedit Commands
progfile
PROG file to "run"; created by :Prep command; if missing, the default is
$oldpass (from last :Prep).
entrypoint
where to start execution in the program.
STACK
reserves a specified amount of dynamic stack from the start.
MAXDATA
specifies the maximum size the stack can grow to.
DLSIZE
specifies the initial size of DL-DB area of stack.
LIB
specifies which SL files to search (G, P, and/or S). The default for this
parameter is normally S (system), but Set Lib can establish G or P as the
default within Qedit.
Qedit 5.9 for HP e3000 User Manual
PARM
specifies a parameter to pass to the program; the value must be between
-32768 and +32767.
DEBUG
invokes the program in the Debug utility.
LMAP
prints map showing where each external procedure is "loaded" from; list
file name is LOADLIST.
NOHOLD
if the program should try to suspend on exit, kill it anyway. Useful for
test versions of programs. Always creates a new process; without
NOHOLD, :Run will awaken a held son process instead of creating a
new one.
HOLD
if the program should suspend on exit, hold onto it without asking and
kill off the least-recently used Hold process if there are more than the
Set Limit Hold value. If there is already a held program with the same
name, entrypoint, and PARM value, activate it instead of creating a new
process.
NOPRIV
see the MPE manual for this parameter.
NOCB
see the MPE manual for this parameter.
INFO
passes a string to the program as a parameter; either double quote (") or
single quote (') is allowed as string delimiter, but embedded quotes are
not allowed; the Info= string is upshifted if you use 'string', but not if
you use "string".
STDIN
specifies redirection of $stdin file.
STDLIST
specifies redirection of $stdlist file.
PRI
execute the program at the priority specified.
QINPUT
open *filename and pass it to the program, using a message file for
Qedit workfiles.
NOSTOP
continue editing in Qedit while the new program is running. Will not
work if the program uses Control-Y or does terminal I/O.
XL
list of XL files to search for MPE/iX programs (in quotes).
UNSAT
procedure name to use for all unsatisfied external references. Quotes are
optional but accepted. Works only on MPE/iX.
Examples
/run
/ru spook.pub.sys;hold
{run $oldpass with defaults}
{hold onto spook}
/ru pf m 5000 de
{:run pf;maxdata=5000;debug}
Breaking a Program
If a program that you are testing from within Qedit should go into an infinite loop,
you can stop it by striking the "break" key. MPE responds with a colon prompt (:),
unless you have "break" disabled in your program. The :Abort command kills the
program, but it also stops Qedit, and you must run Qedit again.
Suspending a Program
If you run a program that "suspends" instead of terminating, what Qedit does
depends upon whether you specified the Hold keyword or the NOHOLD keyword or
neither. With NOHOLD, Qedit kills the program. With Hold, Qedit saves the
program and, if more programs have been saved than allowed by Set Limit Hold,
kills the least-recently used one. If neither Hold nor NOHOLD was specified, Qedit
asks if you would like to Hold the program. When you next :Run that program, Qedit
merely activates the held process. You must :Run it with the same entrypoint and
PARM value to reactivate the program. If you :Run the program a second time, but
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 203
specifying NOHOLD, Qedit creates a second process. It is much faster to activate
than to create. Programs run with Stdin=, Stdlist=, or Qinput= cannot be held.
Programs that suspend on exit include SPOOK, SUPRTOOL, and EQUATER.
(SPOOKsters note: Exit does not release the current spool file; use Text with no
parameter before Exit for that purpose.)
To see what programs you have held, use Verify Run. To enter one of your held
programs, use :Run with the full program name, entrypoint name, and Parm= value
(unless zero). Qedit looks first in the Hold table before it creates a new copy of the
program. If Qedit finds the program there, it just activates the existing copy, which is
faster. Or, :Activate with a subset of the program name and entrypoint (i.e., :A SU to
activate Suprtool.Pub.Robelle). Any or all of the Hold programs can be killed with
the :Kill command.
The Set Check Hold Yes option configures a default answer to the "Okay to Hold?"
question of the Run command. Possible values are "YES" (always hold), "NO"
(never hold; same as Set Limits Hold 0), and "ASK" (ask users if they want to hold
each process, which is the default).
Feeding Qedit Files to Programs
Qinput feeds Qedit workfiles into programs that won't read them (e.g.,
DBSCHEMA). For "unnumbered" input lines, use Set Lang Text, JOB or RPG. You
must have a :File equation for the specified filename (i.e, don't specify the actual file
name in the :Run command). Qinput processes Include files as well, but if it cannot
open the file it passes the Include line to your program for processing (#include
). :Reset filename command is done at the end. See also the Qedify
program under Installation.
:file dbstext = xxxx
:file dbslist =$stdlist
:run dbschema.pub.sys;parm=3;qinput=dbstext
Resetting EOF on $Stdin
When you have more than one program running on the same terminal, some unusual
problems can occur. One problem has to do with end-of-file on $stdin and $stdinx. If
you are running SPOOK from inside Qedit (or :Segmenter or any other program that
reads from $stdin) and you try to type an MPE command such as :Listf, the program
terminates with an END OF FILE warning. And, if you try to run the program again,
you get the same warning and nothing will be read from the terminal. To reset EOF
on $stdin, use /:Stream with no parameters. MPE attempts to read a job stream from
the terminal, encounters the EOF, and resets it. You can then run your program
again.
204 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Run, Implied
When you enter a command that Qedit cannot interpret, it checks to see if it might be
the name of a program. First it looks in the logon group for a file whose name
matches your command name. Then it looks in the Pub group of the logon account
and finally it looks in the Pub.Sys group. If it finds a program file that matches,
Qedit then runs that program.
To tell Qedit which groups to search for program files, set the Hppath variable:
/showvar hppath
HPPATH = !hpgroup,pub,pub.sys
/setvar hppath "!hpgroup,bin,pub,pub.sys"
/set hppath "!hpgroup,bin,pub,pub.sys"
{MPE V!}
For example, to run Spook.Pub.Sys, you just enter
/spook
This is called an "implied Run." You are allowed two parameters on an implied Run
command:
/progname ["infostring"] [,parmvalue]
or
/progname [;Info="infostring"] [;Parm=parmvalue]
You can enter the Info and Parm values as either keyworded parameters or positional
parameters. If the first symbol after the program name is neither Info or Parm, it will
be interpreted as the Info string (i.e., quotes are not necessary if the Info string is a
single symbol). If you need other parameters, such as Maxdata or Lib, you will have
to use the standard :Run command.
Examples
/magnet "-f@.source input-buffer -c -l -e"
This looks for a program called Magnet somewhere in the Hppath and executes it
with an Info string.
/pscreen,3
The above command looks for a program called Pscreen, and executes it with
Parm=3.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 205
:Segmenter Command [SEG/:S]
Invokes the Classic Segmenter Subsystem from within Qedit.
:SEGMENTER [ listfile ]
(Default: $stdlist;LP for printer.)
Examples
/seg
{invoke the segmenter; print on $stdlist}
HP32050A.00.00 SEGMENTER/3000 (C) ...
-usl $oldpass
-sl sl.pub
-addsl utilseg
-exit
End Segmenter
/
206 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Set Command [S]
Changes configuration options of Qedit.
SET keyword [ value ... ]
You can use Qedit in its default mode, as it comes out of the box. To get the most out
of Qedit, you will eventually want to try some of the optional features. To see all of
the Set options available and their minimal abbreviations, type Verify All at the
prompt.
/set modify hp
{select MPE-style modify}
/set visual save on update on {full-screen options}
Each Set command may specify one keyword from among those listed below.
Length
Zip
Here is a list of the Set keywords:
Account
Where to find Qedified compilers and help files.
Alias
Redefine Qedit commands or create new commands.
Autocont
Do not abort in batch on errors.
Check
Verify Delete or Justify > 5 lines, hold programs.
Decimal
Apostrophe means Control Character ('7 = Bell).
DL
Reserve memory in DL area for user Procs.
Editinput
Remove line noise; allow Roman-8.
Expandtabs
Expand tab characters into spaces when Texting.
Extentsize
Minimum sectors/extent for Keep and New.
Extprog
Attach an external program such as MPEX to Qedit.
Filename
Override file names on Help, Hint, Qzmodhlp files.
FORTRAN
External files default to FORTRAN, not SPL.
Hints
Disable the "hint of the day".
Hppath
Override default path for cmd/prog files (MPE V).
Increment
Default increment between added lines.
Interactive
Override batch/session mode.
Justify
Margins and options for justifying and centering.
Keep
Format of the next Keep file.
Language
Type of program or text to be kept in this file.
Left
Left margin for edit, list, keep (default=1).
Length
Maximum characters per line for a Lang=Text file.
Lib
Default Lib= for the :Run command.
Limits
Restricting features of Qedit available to user.
List
Format of LP listings; also LJ options.
MAXDATA
Default Maxdata= value for the :Prep command.
Modify
Type of modify (Robelle, HP or Qzmodify).
Open
Default modes for Open Command (Defer, etc.)
Pattern
Switch back to old pattern-matching.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 207
Priority
Switch Qedit execution to a new MPE subqueue.
Prompt
Replace "/" with new prompt string.
Right
Right margin for edit, list, keep, etc.
RL
Default RL= value for the :Prep command.
Shift
Configure how to up- and down-shift.
Spell
Configure how spell checks lines and words.
Statistics
Print CPU and wall time of each command.
Suspend
Whether to suspend on Exit or not.
Tabs
Set "tab" key and columns; set on terminal.
Term
Adjust number of terminal display columns.
Totals
Print number of lines processed by a command.
UDC
Recognize User Defined Commands in Qedit.
Undo
Disable/enable ability to "undo" changes.
Visual
Full-screen options (save fkeys, update, etc.).
Warnings
Print warning messages (or not!).
Whichcomp
Which COBOL compiler, etc.
Window
Rules for string search (columns, upshift, etc.).
Work
Default size/function of workfiles.
Wraparound
Move words to next line when long line Added.
X
Tag changed lines in COBOL file with string.
Zip
Configure auto-modify, first, last, all, etc.
To configure Qedit to operate as you like best, put your favorite Set commands in a
file named Qeditmgr, either in Pub.Sys or in the same group as the Qedit program
file (usually Pub.Robelle). If you can't build files in those groups or you don't think
your Set options will appeal to everyone, create Qeditmgr in your logon group and
run Qedit with Parm=2.
A typical configuration file for a COBOL shop might look like this:
{These are default Qedit values for all users:}
comppri=ds
{force compiles into ds}
set whichcomp cobol 85 {select default compiler}
set lang cobolx all on {always use 80 columns}
set x date list off
{mark changed lines with date}
set check on
{verify delete/format of >5 lines}
set list page on
{lp listings interpret $page}
set vis save 1
{Visual saves function keys}
set udc on
{load UDCs}
z=listj */last
{define Z command}
set shift down 3 up 3 {shift everything but strings}
Syntax of Set Commands
The syntax descriptions that follow list the initial values. These are also the defaults
that are used if you omit values in Set commands. For example:
Set Foo [ ON|OFF ]
(Default: ON)
(Initially: OFF)
The (imaginary) Foo keyword may be set ON or OFF. Initially when Qedit starts up
it is OFF. Thereafter, if you type Set Foo without specifying ON or OFF, the
default will be as though you had specified ON.
208 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Error Messages
If you type a Set command that Qedit does not understand, you usually get an error
message telling you specifically what is wrong, sometimes suggesting valid values.
Occasionally you will see the error message
Error: Param.
This is Qedit's catch-all message for when you have typed something that it doesn't
like, and cannot guess what you meant.
Account
Set Account accountname
(Initially: same as the Qedit program)
By default, Qedit looks in the same account that its program file lives in for copies of
the MPE CM compilers (in the Q group) and the Qmap.Pub program. If you run a
copy of Qedit in the Vesoft account, Qedit looks for the compilers in the Vesoft
account instead (it also looks for the help files in Vesoft -- see Set Filename).
What to do? You can either copy the files needed into the same account as the Qedit
program file or you can use the Set Account command to force Qedit to look in a
specific account (e.g., Robelle).
/set account robelle {Cobol.Q.Robelle}
For example, if you are running a hooked version of Qedit in Pub.Vesoft, you could
put this command in the configuration file Qeditmgr.Pub.Vesoft. See "Running
Qedit under MPE" for more details.
Alias
Set Alias aliasname To aliasdefinition
Qedit commands have priority over any external commands, such as UDCs and
command files. The fact that Qedit commands can be abbreviated to a few characters
(e.g., C for Change) and combined with various suffixes (e.g., CQ for Change Quiet)
has caused some problems with seemingly different external commands.
The new Set Alias command now allows you to override Qedit's command priority.
Aliases are always executed first. For example, SPJ is the abbreviation for Qedit's
SpellJ (i.e., call the spell checker in Justify mode). If you had a command file or
UDC called SPJ, you could get it to execute only by explicitly using the colon prefix
(:SPJ).
Using the Alias feature, you can now use
/Set Alias "spj" to ":spj"
From that point on, entering SPJ would always call the external command.
The alias name and definition must be enclosed in a string delimiter such as quotes.
You must use the same delimiter for both items.
/Set
/Set
/Set
/Set
Alias
Alias
Alias
Alias
"SPJ"
\SPJ\
"SPJ"
\SPJ\
to
to
to
to
":showout"
\:showout\
\:showout\
":showout"
{valid}
{valid}
{invalid}
{invalid}
The alias name can have up to 50 characters. It can contain only alphabetic
characters. Although the alias should not contain numeric digits, special characters or
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 209
spaces, the Set command does not currently prevent you from using these characters.
If you do use them, the alias feature will not work properly. If you use an alias name
that has already been defined, the new definition replaces the old one.
The alias definition can contain up to 77 characters and can include one or more
commands. The definition can contain any command that can normally be entered at
the Qedit prompt, including other aliases.
You can use Qedit's command stacking feature to enter a series of commands and
create something that resembles a macro command.
Set Alias "Five" to "First;F 'string';List */*+5"
The length of all alias names and definitions cannot exceed 2,500 characters.
Stacked commands are separated by a semicolon (;). If you use MPE commands,
UDCs and command files, you might have to use semicolons to separate parameters.
This will confuse Qedit. There are different ways to work around this problem.
You can put the command in another UDC or command file that does not require
parameters.
/echo listspf o@;seleq=[owner=mgr.acct] > mycmd
/Set Alias "SPJ" To "mycmd"
You can set an MPE variable with the appropriate information and reference the
variable.
/setvar mycmd "listspf o@;seleq=[owner=mgr.acct]"
/Set Alias "SPJ" To ":/!mycmd"
The last option is to enclose the command and its parameters in parentheses.
/Set Alias "SPJ" To "L 1;(listspf o@;seleq=[jobnum=J123]);V"
If the command itself contains parentheses, you will have to use the variable or
command file approach.
Function Key
Set Alias Fkey keynumber To aliasdefinition
You can also assign an alias definition to a function key. Let's say you want the F1
key to perform a series of commands, simply enter
/Set Alias Fkey 1 to "showme"
The function key number can only have a value of 1 through 8. The function key
aliases only work in Line mode. In full-screen mode, they are redefined to the
standard Visual meanings.
You can define function keys by specifying the escape sequence they transmit. For
example, the F1 key sends ESC+P. Thus you could use
/Set Decimal On
/Set Alias '27"p" To "showme"
{'27 is the ASCII code}
Ignorecase
Set Alias Ignorecase [ ON | OFF ]
(Default: On)
(Initially: On)
210 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
On MPE, alias names are not case-sensitive by default (i.e., spj and SPJ are the
same). However, you can enable sensitivity with Set Alias Ignorecase Off, in which
case spj is considered different than SPJ.
Trace
Set Alias Trace [ ON | OFF ]
(Default: On)
(Initially: Off)
If you are nesting aliases and are experiencing problems, you can enable the alias
trace with Set Alias Trace On. Qedit then displays aliases as it executes them.
Remove
Set Alias aliasname OFF
If you want to remove a single alias, you can use Set Alias "SPJ" Off.
Reset
Set Alias Reset
If you want to remove all your current aliases, enter Set Alias Reset.
Autocont
Set Autocont [ ON | OFF ]
(Default: ON)
(Initially: OFF)
Normally, Qedit aborts in batch mode if errors occur. Set Autocont ON disables this
abort. If the ON|OFF parameter is omitted, ON is assumed. Turning on this option is
the same as inserting a Continue command in front of every other command. This
applies to command files and UDCs as well, even in session mode (same as
Hpautocont in MPE/iX).
Check
Set Check [ [ Delete | Justify ] ON | OFF ] [ Hold Yes | No | Ask ]
(Initially: both OFF, Hold Ask)
Causes Qedit to ask for approval before performing certain tasks.
Set Check Hold Yes configures a default answer to the "Okay to Hold?" question of
the Run command. Possible values are "YES" (always hold), "NO" (never hold;
same as Set Limits Hold 0), and "ASK" (ask users if they want to hold each process,
which is the default).
Set Check Delete On asks approval before deleting more than 5 lines. Set Check
Justify On asks approval before formatting (i.e., Justify Format or Both) more than 5
lines. Both options are OFF by default. Set Check ON turns them both on and Set
Check OFF turns them both off. Or you can adjust them individually.
When Check Delete is ON, you are asked before deleting more than five lines.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 211
/dq 1/10
Delete 10 lines [no]? yes
Regardless of whether Check is ON or OFF, you can always undo the effects of a
Delete or Justify, using the Undo command.
Decimal
Set Decimal [ ON | OFF ]
(Default: ON)
(Initially: OFF)
If you need to find nonprinting characters, you can enable the Decimal option. When
this option is active, character strings in Qedit can refer to characters by giving the
ASCII character code in decimal, preceded by an apostrophe:
/set decimal on
/list '7
/c "~" '27 all
{enable entry of control codes}
{list all lines with Bell}
{change "~" to Escape}
Set Decimal ON disables use of the apostrophe (') as a string delimiter, and the use
of ' as part of a string in the Change command.
Whenever you use the apostrophe with Set Decimal On, you have to use a space as a
delimiter between the search string and the replacement string. This means that you
cannot use the abbreviated syntax, as in
/c "abc"def" all
Qedit is able to determine that "abc" is the target string and "def" is the replacement
string. With Set Decimal On, the space between the target string and the replacement
string is mandatory. Also, it is possible to mix ASCII code values and regular
characters. Regular characters must be enclosed in another set of string delimiters.
For example,
/c '27"&d@" '27"&dJ" all
/l "abc"'13
/l '9"ColumnData"'9
{ target=&d@, replacement=&dJ }
{ target is abc }
{ target is ColumnData }
DL size
Set DL [ size ]
(Default: 132)
(Initially: 132)
Some Proc routines (see Proc command) have been written to use the area in the data
stack between DB-1 and DB-132. Qedit does not touch this space , except that the
Lsort command may modify DB-%12. If you need more than 132 words, use the Set
DL command. The default size is 132 words, but you can configure any size between
132 and 10,000. Set DL is rejected if you have UDCs active (see Set UDC). In order
to reserve 600 words in DL-DB, enter this command:
/set DL 600
Editinput
Set Editinput
option value ...
Data ON | OFF
212 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Command ON | OFF
Extend ON | OFF
Asian ON | OFF
(Initially: Data=OFF, Command=OFF, Extend=ON, Asian ON)
Normally Qedit accepts whatever you type as being valid. However, if you are
connected to the computer via a phone line you will probably find that strange,
nonprinting characters are getting into your files. These are generated by line noise.
You can use Set Editinput Data or Set Editinput Command to tell Qedit to remove
nonprinting characters from your input. However, nonprinting characters include
useful characters such as BELL and ESC. You can explicitly insert nonprinting
characters into your text using Set Decimal and Change, or using the WP or W$
function of Set Mod Qzmod.
Set Editinput Data ON removes "noise" from text added to your file in Line mode (it
has no effect on Visual mode).
Set Editinput Command ON removes "noise" from commands.
If you don't want to edit Roman-8 characters in either Line or Visual mode, use Set
Editinput Extend OFF. This tells Qedit to discard the Roman-8 characters as noise,
rather than allow them through as valid characters. The default setting is ON for the
benefit of European users. When Extend is ON, UPSHIFT string windows will work
on Roman-8 characters (e.g., List "ü" (up)).
Asian terminals use a two-character code for each symbol in the language. When you
set Extend ON, you also set Asian ON by default. This validates all possible
character codes from 128 to 255, not just 161 to 254 as used by the Roman-8
character set.
If you want Roman-8 characters, but don't want Qedit Visual mode to display
undefined control codes (such as decimal 130, which might be included in a file as a
printer control), use Set Editinput Asian OFF. Otherwise, some terminals change the
value of the codes, and other terminals just drop the codes from the file. When you
turn Asian OFF, Roman-8 characters may still be displayed and edited, but control
codes from 128 to 160 are displayed as dots (".") with a question mark to the left of
the line, indicating that they can only be edited in Line mode, not Visual mode.
Expandtabs
Set Expandtabs ON | OFF
(Initially: Off)
When Qedit encounters tab characters in an external file, it can either copy them as is
or it can expand them into the appropriate number of space characters (using the Set
Tab Stops value). The default is to leave them as is, in the file. You can enable the
removal of tab characters by expansion into spaces through use of Set Expandtabs
On. However, there are some applications that use tab characters as field separators
in their data files.
Extentsize
Set Extentsize keepfile [ workfile ]
(Initially: 100, 30 sectors)
Set Extentsize specifies the size in sectors of disc chunks for files built by Qedit.
There are separate values for Keep files versus Qedit workfiles, since Keep files are
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 213
normally static while New files are dynamic. Initially the minimum extent size for
Keep files is 100 sectors and 30 sectors for work files.
For small files, Qedit reduces the number of extents by increasing the size of each to
the specified minimum. This avoids generating numerous small pieces of space that
clutter up the disc and make backup take longer. If you are very tight on disc space,
you may want smaller values for Extentsize. If you have extra disc space, you should
use a larger value such as 300 sectors. The range of values accepted is 5 to 5000
sectors.
Extprog
Set Extprog [ program [ parm ] [ Com [ ON | OFF ] ] ]
(Default: none)
(Initially: none)
Extends the power of Qedit by attaching another process to it. The program specified
must be a program file that can be Run with Lib=S (i.e., all defaults except for parm)
and that will suspend on exit instead of terminating. When you first enter a command
that starts with a percent sign ("%"), Qedit creates the specified external program as
a son process. Qedit waits until the son process is done. When the son completes,
Qedit prompts you for another command. On subsequent %-lines, Qedit merely
"activates" the son process, which is much faster than creating a new one -- almost
instantaneous.
If you use the Com ON option, Qedit sends the %-line to the son process via the
MAIL intrinsic before activating the son. Qedit removes the % from the line and fills
it out to a length of 256 bytes with blanks. There is no terminating character.
Do not use Com ON unless the son process is programmed to pick up the MAIL
message. MPEX, for example, will do so. If the program is either Main.Pub.Vesoft
or Mpex.Pub.Vesoft, Qedit assumes Com ON. If you have a recent version of MPEX,
do Set Ext Main.Pub.Vesoft as this creates one less process.
Qedit always updates the current workfile to the disc, but does not close it. Since
Qedit does not actually go to the work of creating the son process until you enter the
first % command line, you can include Set Extprog in your Qeditmgr file without
incurring any overhead.
/set extprog main.pub.vesoft
Entering Set Extprog without any parameters terminates the existing child process if
one exists.
Filename
Set Filename Help | Hint | Qzmod filename
(Initially: in same account as Qedit)
By default, Qedit looks for the Help, Hint and Qzmodhlp files in the account where
the Qedit program file resides. The group to search depends on the program's group
of residence: for PUB the group will be HELP; for PUBNEW the group will be
HELPNEW, and for PUBOLD the group will be HELPOLD. You may force Qedit
to open specific file names with the Set Filename command. See also Set Account.
214 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/set filename help qedit.help.util
/set filename hint qedhint.help.util
/set filename qzmodhlp qzmodhlp.help.util
FORTRAN
Set FORTRAN [ ON | OFF ]
(Default: ON)
(Initially: OFF)
When Qedit is TEXTing in a file, it must decide what language type that file has. If
the file is a Qedit file, there is no problem, because the language type is stored as a
field within the file.
If the file is a Keep file, Qedit examines the record length, file code, and position of
the sequence number field. Unfortunately, there is no foolproof way to distinguish
between SPL, PASCAL and FORTRAN source files, since all have sequence
numbers in columns 73-80. If the current language is set to FORTRAN, Qedit treats
the external file as FORTRAN. If the current language is not set to FORTRAN (i.e.,
to JOB, COBOL, SPL, etc.), Qedit treats the file as an SPL (or Pascal) file. If a file is
mistakenly created as SPL or Pascal, you can change it to FORTRAN with Set Lang
FORTRAN. You can also resolve the ambiguity by specifying the language after the
file name when you Text it (e.g., /text abc,fortran).
If you primarily edit FORTRAN source files, you can avoid this problem with Set
FORTRAN. When this option is set, Qedit will always resolve decisions on external
files in favor of FORTRAN, regardless of the current language setting. You may
then have to convert the occasional file from FORTRAN to SPL or Pascal.
HFS
Set HFS ON | OFF
(Initially: OFF)
For all file operations on MPE, Qedit assumes the files are in the MPE namespace.
This implies certain things such as file names are always uppercase. If the file you
want to work on is in the POSIX namespace, you have to remember to prefix its
name with a dot (.) or a slash (/). If the file also contains $include statements, the
names on these statements should also have POSIX prefix characters.
If you do not work with many POSIX files, having to include the prefix is probably
not bothersome. However, if you spend most of your time in the POSIX namespace,
entering the prefix may eventually become annoying. You can enable the Set HFS
option and request that all file names be interpreted as POSIX names. If the name
does not already start with a dot, a slash or a dollar sign ($), Qedit automatically
prepends a dot-slash (./). Qedit does not upshift the file name. This logic also applies
to names coded on $include statements.
If Qedit cannot find a file in the POSIX namespace, it automatically looks for it in
the MPE namespace. In the MPE namespace, Qedit uses the file name exactly as it
was entered, without inserting a prefix. Basically, it searches the MPE namespace in
case the file is there. This adds a lot of flexibility for people working in both
environments.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 215
Halfbright
Set Halfbright ON|OFF
(Initially: ON)
Certain monitors do not support halfbright display enhancements very well. Some
messages and prompts are hardly visible. To prevent Qedit from using halfbright,
enter Set Halfbright Off.
Hints
Set Hints ON | OFF
(Initially: ON)
By default, Qedit provides all users with a "hint of the day" each time they enter
Qedit. These hints introduce people to features of Qedit that they may be missing.
You must have the file Qedhint.Help.Robelle on your system. To disable hints, put
Set Hints OFF in any of your Qedit configuration files (Qeditmgr).
Hppath
Set Hppath "path list"
(Initially: "!hpgroup,pub,pub.sys")
Hppath is a feature of MPE/iX that directs Qedit to look in specific groups for
program and command files to execute. The default Hppath is your logon group
(!hpgroup), the Pub group of your logon account (pub.!hpaccount), and Pub.Sys. On
MPE/iX, you would use these two MPE/iX commands to set and check your Hppath:
:setvar hppath "!hpgroup,cmd,cmd.util,pub,pub.sys"
:showvar hppath
MPE V does not support the :Setvar and :Showvar commands, so you would use
these two Qedit commands to set and check your Hppath:
/set hppath "!hpgroup,cmd,bin,cmd.util,pub,pub.sys"
/verify hppath
The Set Hppath command allows reference to the !hpgroup, !hpaccount and
!hphgroup variables within your path string. Set Hppath is only supported on MPE
V.
Increment
Set Increment linenum
(Initially: depends)
The default increment between new lines is 1.000 in SPL, FORTRAN, Pascal,
TEXT, RPG, JOB and COBFREE, and 0.100 in standard COBOL. You can override
this value with Set Increment. The linenum is a number between 0.001 and 10,000.
This increment is also used as the default increment in Renumber and in assigning
line numbers to external files that lack them.
Qedit will sometimes pick an increment smaller than your requested one. For
example, if you Set Inc 0.2 and do Add 55.2, Qedit will increment by 0.1 based on
the number of decimal places in 55.2.
216 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Interactive
Set Interactive [ ON|OFF ]
(Default: no change)
(Initially: depends)
If you run Qedit from a Session, Set Interactive is ON. If you run Qedit from a batch
job or with Stdin or Stdlist redirected, Set Interactive is OFF. When it is OFF, Qedit
will abort on any error, will assume the default answer to any question, and will
generally act as if there is not an intelligent being typing the commands. When it is
ON, Qedit waits for answers to questions and does not trim trailing spaces from input
lines (allowing you to enter // plus a space as a data line in the Add command).
However, if you run Qedit on a Remote Session that was created from a batch job,
Set Interactive will be ON even though you are NOT interactive. If you wish to have
proper batch error processing, your first command after :Run Qedit should be Set
Interactive OFF.
Entering Set Interactive with no ON or OFF parameter does not change the current
setting.
Justify
Set Justify [ keyword [value] ... ]
(Initially: NULL function, TWO OFF)
The Set Justify command allows you to configure Qedit for the type of justify
operations that you are going to use most frequently. These are then the defaults.
For example, the command
/set justify margin 70 two on null
causes
/justify both 5
{J=justify, B=both}
to be interpreted as
/j both margin 70 two on 5
See the Justify command for further details.
Keep
Set Keep [ option value ]...
(Default: same as Text file)
Determines the format of the next Keep file. Attributes are taken from the previous
Text or Keep, or they are based on the current Set Lang value. Qedit attempts to
duplicate the Text file as much as possible when doing the Keep. Use Verify Keep to
display the current Set Keep values, including the default file name.
The options you can set for the Keep file are ASCII, CCTL Checktimestamp, Code,
Lab, Limit, Name, Num, Var, Cobfree and Bytestream.
Set Keep ASCII ON | OFF
(Initially: ON)
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 217
Files can be either ASCII or Binary. Qedit takes this value from the file that you
Text, but will revert to ASCII ON for any new workfile. Even though Qedit will
create binary files with Keep, it is not recommended for use in editing binary files.
The reason is that Qedit treats Carriage Return as end-of-line, which may truncate
some records. ASCII files have their records padded with blanks; Binary files are
padded with zeros (nulls).
Set Keep Bytestream ON | OFF
(Initially: OFF)
POSIX introduces a new type of file called Bytestream. These files do not
necessarily have record structures that are similar to typical files on MPE.
Bytestream files come from the UNIX environment. To application programs, they
simply appear as a stream of bytes (hence the name). To MPE, these are variablelength files in which each record contains only one byte.
When a Text command is used on an existing bytestream file, Qedit is able to
recognize the file and preserve its attributes on a Keep command. To create a new
bytestream file, you have to use Set Keep Bytestream On.
Because bytestream is sort of an extension to variable-length files, these two options
are closely linked. If you use Set Keep Bytestream On, the Variable option is also
enabled. If you use Set Keep Bytestream Off, the Variable option is also disabled. If
you use Set Keep Variable Off, the Bytestream option is also disabled. You can still
enable Variable by itself, without enabling Bytestream.
Set Keep CCTL ON | OFF
(Initially: OFF)
Ordinary ASCII files have the CCTL value OFF. When CCTL is ON, the first
column of each record must contain a carriage control value. Some of the common
values are "1" for new page, "+" for overprint, and " " for normal single-space. When
Qedit prints a file with CCTL in quiet-mode (i.e., no line numbers and no template),
it interprets the carriage control values.
Set Keep Checktimestamp ON | OFF
(Initially: ON)
Qedit stores the file modification timestamp in the workfile. It uses the timestamp to
determine whether the file has been modified since either the initial Text command
or the last Keep command was used. By default, timestamp checking on Keep is
enabled.
If you want to disable this feature, type
Set Keep Checktimestamp Off
If you wish to see the current saved timestamp, you have to use Verify Info.
Saved modification timestamp 2005/10/14
Trailing spaces in workfile are trimmed
18:29:02
Set Keep Cobfree ON | OFF
(Initially: OFF)
Qedit uses the file code (EDTCT or 1052) for an MPE file or the file extension (.cbl,
.CBL, .cob or .pco) for a Posix file, to identify COBOL source files. The .pco is
typically used to identify Cobol source files that needs to be processed by the Oracle
pre-compiler.
218 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
If Qedit detects this attribute, it assumes the lines have a specific format. In
particular, it looks for the presence (or absence) of sequence numbers in the first six
(6) columns of each line.
If these columns do not contain numeric digits or spaces, Qedit assumes the file is a
free-format source file without a sequence number. The file is then assigned the
COBFREE language.
The Set Keep Cobfree option controls the format of the file when you Keep it back.
If this option is enabled (On), it means you allow Qedit to save files in the
COBFREE format (i.e., without sequence numbers). If this option is disabled (Off),
it means you don't want to create COBFREE files. When this option is disabled,
Qedit converts the file to COBOL, assigns it sequence numbers and writes them to
the saved file. A warning is displayed before this occurs.
/Keep
Warning: Lines are now numbered.
Language changed from Cobfree to Cobol.
COBFON.COBSRC.APP,OLD EDTCT # of records=26
Purge existing file [no]?
Set Keep Code nnn
(Initially: , 0)
Any file can have a special file code to help identify what kind of data it contains.
Qedit workfiles, for example, always have a Code of 111, while COBOL source files
have a Code of 1052 (EDTCT).
You can create files with any code you like using Set Keep Code and the Keep
command. However, the file code cannot be changed if the Language is COBOL or
COBOLX.
Set Keep Label num
(Initially: 0)
This value is set to the number of user labels attached to the file, when you Text it.
Text filename,Labels will copy the user labels into the new file. Keep will append
those labels to the file, unless you do Keep filename,Nolabels. If you want to change
the number of user labels to be created on the new Keep file, do Set Keep Label n.
Set Keep Limit [ Free | Save | Percent pp | Plus nn ]
(Initially: )
The Set Keep Limit option allows you to control how the file limit of a Keep file is
derived from the current number of lines in the file or the original Text file.
Once a Set Keep Limit option is selected, it is applied to all subsequent Text
operations, but not to currently open files or existing workfiles. The options are
designed so that you can put them in a Qeditmgr configuration file and apply them to
all Text and Keep operations, even in Qedit for Windows. However, you can also set
the options before each Text and Keep sequence if you prefer to apply them only to
individual files. You simply need to look at the current setting, change it to the
desired value, use the Text command to access the file and make the changes to the
file. Once you are done, use the Keep command to save the file and return Set Keep
Limit to its original value.
If you enter Set Keep Limit with no parameters, you are selecting the default
operation. This option truncates the Keep file to the current number of records,
except that any expansion space beyond the EOF and File Limit of the original Text
file is carried over to the new Keep file. However, Qedit does not allow the
expansion space (EOF - FLIMIT) to exceed 2,000,000 records.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 219
For example, if you use the Text command to access a file that currently contains 50
records (EOF) and has room for 100 (Limit), Qedit preserves the number of available
records. If you then delete 10 lines, the new Keep file would have 40 records (EOF),
but would allow up to 90 (Limit). Because the file is truncated to the current end-offile, you cannot use a :File command to override the limit.
On the other hand, if a file contains 10 records (EOF) and has room for 3,000,000
(Limit), the limit would change to 2,000,010 after a Keep.
The Set Keep Limit Free option sets the limit to the current number of lines in the
file. If you use the Keep command only on a subset, the limit is not truncated to the
end-of-file. This option allows you to use a :File command to specify an explicit
Limit for the Keep file.
file xyz;disc=10000
/keep xyz
The Set Keep Limit Save option retains the Limit of the original Text file as the
minimum, even if you delete some lines while editing. If you add lines to the file, the
original limit is increased to match the current number of lines.
The Set Keep Limit Percent option calculates the limit as a percentage of the current
number of lines. The Percent value can range from 100 to 1,000. For example, if
Percent is 200 and you have 50 lines in the file, a file saved by the Keep command
will have a Limit of 100 lines.
The Set Keep Limit Plus option sets the Limit of the Keep file to the current number
of lines plus the value specified as a parameter. The value can range from 1 to
30,000. For example, if the Plus value is 500 and you have 100 lines in the file, a
new Keep file will have a limit of 600 lines.
Set Keep Name [ filename [,Temp] ]
(Initially: )
The default name for Keep is the same name as the last Text or full Keep command,
if any. A "full" Keep is one without a limiting range or margins. If the last Text or
Keep was a temporary file, the default will also be temporary. The default is invoked
when you do a Keep without any parameters. You can set the default name with this
command. To force the file to be created as a temporary file, append the Temp
keyword to the file name.
If you do not specify a file name, the default Keep name is erased as if this was a
brand new file. If you erase the default Keep name or replace it with a new name, the
saved modification timestamp is erased.
Set Keep Num ON | OFF
(Initially: ON)
Keep files may or may not have sequence numbers. In standard COBOL files, the
sequence numbers are in columns 1 through 6. In all other files they are in the last
eight columns. When Qedit copies in an external file it remembers whether that file
was numbered or not (if not, new sequence numbers are assigned to each line in the
workfile).
When you set the language to Job or Text, Qedit turns the Num flag Off. This means
that default Keeps of these files will be without sequence numbers. You can always
override the Qedit default by doing an explicit Set Keep Num prior to the Keep.
Set Keep Var ON | OFF
(Initially: OFF)
220 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
MPE files may have fixed-length records or variable-length ones. Qedit will
duplicate whatever the Text file had, but the default is to create fixed-length records.
Files with variable-length records are handy as job stream files because they allow
you to duplicate terminal input more precisely (e.g., you can have lines with length
of zero, the same as pressing only a Return on the terminal). When Keeping Var files
with line numbers, the 8 digits of the line number will immediately follow the last
character in the line.
/t qnews=news;set keep code 112 var on; verify keep
Set Keep Ascii ON Cctl OFF COde 112 Num OFF Var ON NAme NEWS
/keep vnews;:listf @news,2
ACCOUNT=
GREEN
FILENAME
CODE
NEWS
QNEWS
VNEWS
* 111
112
GROUP=
BOB
-------LOGICAL RECORD------- ----SPACE---SIZE TYP EOF LIMIT R/B SECTORS #X MX
80B
256W
1276B
FA
FB
VA
411
26
411
411
642
7
16
1
1
135
84
40
2 2
2 31
8 8
Note that while Qedit makes every attempt to preserve file attributes when you Text
and Keep a file, Qedit is unable to retain the record size of a variable-length file. A
Listf before and after may show a different record size. The data in the file, however,
is the same. Application programs reading the files will read the same data.
/listf myfile@,1
ACCOUNT= GREEN
FILENAME
CODE
MYFILE
GROUP=
MIKE
------------LOGICAL RECORD------SIZE TYP
EOF
LIMIT
1276B
VA
142
5
/text myfile
/keep myfile2
/listf myfile@,1
ACCOUNT=
GREEN
FILENAME
CODE
MYFILE
MYFILE2
GROUP=
MIKE
------------LOGICAL RECORD------SIZE TYP
EOF
LIMIT
1276B
1020B
VA
VA
142
142
5
6
Notes About Set Keep. Normally, Keep truncates the Limit of your new file to the
EOF, so no disc space is wasted. However, if you Text a file whose LIMIT is greater
than its EOF, Keep will retain the same difference on the new file. In that case, Keep
"trims" your file of any unused disc space in the last extent (up to 2000 sectors). You
can still add to the file, however, since the EOF is still less than the Limit.
The record size of the Keep file comes from Set Language (SPL, FORTRAN, and
Pascal equal 72 bytes, JOB and RPG equal 80 bytes, COBOL equals 66 bytes,
COBOLX equals 74 bytes. For Text and Data the precise length is specified with Set
Length. For Text the maximum is 256, and for Data it is 8,172. COBFREE file
attributes are similar to Text files (i.e., they have the same maximum length). If Set
Left/Right have been done, the record size is Right-Left+1. If Set Keep Num is ON,
Qedit adds 8 bytes to the record size (6 for COBOL).
There are a number of attributes of a file that are not retained when you do a Text
and Keep: message file, circular file, KSAM file, user labels (unless Set Work
Labels On), security, block size (Qedit selects an appropriate one), number of extents
(see Set Extentsize), and logical device.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 221
Language
Set Language lang
(Initially: SPL)
The lang codes accepted by Qedit are:
COBOL, COBOLX [ALL], SPL, FORTRAN, Pascal, RPG, Job, Text,
Data, CC, CPP, PowerHouse (PH), COBFREE, Html, XML, Java and QSL (Qedit
Scripting Language).
Initially when Qedit starts the language is assumed to be SPL, but this may be
changed when you Text a file ("SPL" stands for Systems Programming Language,
which is an obscure software tool on the original HP e3000 system; files have 80character records with columns 73-80 containing a sequence number). You can
override this default this with Set Lang. When you Set Lang, you also reset the
Window, the Length, the Left margin, and the Right margin.
The "language" sets the following file attributes:
1.
Increment between lines
2.
Number of digits in line number
3.
Placement of line number (left or right)
4.
Maximum data line length
5.
Number of first data column
6.
Name of compiler program file
7.
Delimiters for Set Window (SMART)
8.
Numbered or not for Keeps
The following chart shows the values set for each language:
Lang
222 • Qedit Commands
1
2
3
4
5
6
7
8
COBOL
0.100
6
Left
66
7
COBOL
Special, not "-"
Yes
COBOLX
0.100
6
Left
74
7
COBOL
Special, not "-"
Yes
SPL
1.000
8
Right
72
1
SPL
Special, not "'"
Yes
Fortran
1.000
8
Right
72
1
Fortran
Any special
Yes
Pascal
1.000
8
Right
72
1
Pascal
Special, not "_"
Yes
RPG
1.000
8
Right
80
1
RPG
Ignored
No
Job
1.000
8
Right
80
1
Null
Any special
No
Text
1.000
8
Right
256
1
Null
Any special
No
Data
1.000
8
Right
8,172
1
Null
Any special
No
CC
1.000
8
Right
256
1
Null
Special, not "_"
No
CPP
1.000
8
Right
256
1
Null
Special, not "_"
No
PH
1.000
8
Right
256
1
Null
Special, not "-"
No
COBFREE 1.000
8
Right
256
1
Null
Special, not "-"
No
HTML
1.000
8
Right
256
1
Null
Special
No
XML
1.000
8
Right
256
1
Null
Special
No
Java
1.000
8
Right
256
1
Null
Special, not "_"
No
Qedit 5.9 for HP e3000 User Manual
QSL
1.000
8
Right
256
1
Null
Special, not "_"
No
COBOL and COBOLX are identical, except that COBOLX allows data to extend
into columns 73-80, while COBOL does not. This is a protection against compile
errors for those programmers who do not use columns 73-80 for comments. You can
force all COBOL files to be in COBOLX format by using
/set lang cobolx all on
This is useful when you are using Set X to tag program changes with a string or the
date. You can change from a non-COBOL to a COBOL language, if the highest line
number in your file is less than or equal to 999.999.
The COBOL and COBOLX languages follow the COBOL standards very carefully.
These standards describe the format of a statement. Most, if not all, compilers
support the standards. Some compilers, however, allow a source file to be in a
different format. Here is a quick summary of the differences between COBOL,
COBOLX and COBFREE:
COBOL
COBOLX
COBFREE
Line numbers
columns 1-6
columns 1-6
none
Control column
column 7
column 7
column 1
Statements
columns 8-72
columns 8-72
columns 1-1,000
Comments
none
columns 73-80
none
Starting column
7
7
1
Variable length
no
no
yes
Record length
72
80
256
The Data Language setting defaults to 256 characters per record, but it can handle up
to 8,172 characters in a Wide-Jumbo workfile. In a workfile of Jumbo format, the
limit is actually 1,000. To use Data, your workfile must be in Jumbo or Wide-Jumbo
format, which supports longer lines and more of them (99,999,999 instead of
65,535). If a non-Jumbo workfile is open, you will have to shut it before you can use
Set Lang Data and create a new workfile. To check whether your open workfile is
Jumbo or not, use Verify Open. If the Language value contains "Jumbo" or "WJumbo," you are using a Jumbo file. If you want to use a Jumbo file, set the Length
to a value less than or equal to 1,000. For a Wide-Jumbo format, use a length greater
than 1,000.
Because RPG is a column-oriented language, SMART searches on RPG source files
are performed in DUMB mode.
In FORTRAN, spaces in the middle of names have no significance (i.e., CUST
BOOK is the same as CUSTBOOK).
If a workfile is empty, you can set the Language to anything you like.
When you change Language, you change the maximum line Length. If Length is
reduced, as in going from Job to SPL, the lines are not actually truncated to the
shorter Length. They are only permanently truncated if you modify the lines.
Therefore, you can switch back to the previous Language at once and still recover
the full lines. (Note: when you switch from COBOLX to COBOL, lines with
comments are actually stripped of their comments.) Of course, when you Keep your
file, only the data within the new margins are kept.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 223
Left
Set Left [n]
(Default: first column)
Set Left specifies a temporary left margin for your file. Existing data to the left of the
margin is not changed (unless you delete a line). When you copy or move a line with
Add, the entire line is moved. If you add new lines, they will contain spaces to the
left of the margin.
Set Left applies to all Qedit commands, including Visual, Modify, List, and Keep.
Don't forget to reset Set Left when you want to Keep a file.
Set Left resets the Set Window columns for string searches. See also Set Right.
Length
Set Length nn
(Initially: from file TEXTed)
Most files have a fixed record length determined by the Language setting (e.g., SPL,
COBOL, etc.). Workfiles with Language Text or Data can have their maximum line
length set to a custom value. "Text" defaults to 256, but can be set to any value
between 1 and 256 columns. "Data" defaults to 256 as well, but can be set to lengths
of up to 8,172. If you Text in a file with an unusual record size (i.e., not 72 or 80),
Qedit will use Set Lang Text and Set Length to remember the record size of the
external file.
Set Length will reset the Set Left/Right margins and the Set Window columns for
string searches.
When you reduce the Length, you should treat data beyond the new Length as gone,
unless you immediately reset the Length. As soon as you begin modifying lines,
Qedit begins reducing lines to their new maximum length. If you wish to reduce the
line length temporarily, use Set Right.
Lib
Set Lib G | P | S
(Initially: S)
When Qedit executes an MPE :Run command, it uses the current Set Lib value for
the Lib= parameter. If most of your testing is done with a local library (i.e., with
Lib=G), Set Lib G will eliminate the need to specify that option on every :Run. You
can always override the default value on any :Run command (:Run PF; Lib=S).
Limits
Set Limits
[ option value ] ...
Sys OFF
Run OFF
Colonreq OFF
Hold n
Proc x
224 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
(Initially: Sys ON, Run ON, Colon OFF, Hold 10, Proc 4)
This command allows the system manager to place restrictions on what commands
are available within Qedit. If Run is OFF, the user cannot use :Run, :Compile,
:Segmenter, or any other command that requires creating a process.
If Sys is Off, in addition to restricting :Run commands as above, the user cannot
execute any system command such as :Showjob, :Purge, or :Destroy. It also prevents
Qedit for Windows users from accessing host commands. These are one-way options
-- once disabled, they cannot be enabled again by the user.
Qedit normally accepts system commands with or without a colon prefix. To require
a colon for system commands, use Set Limits Colonreq ON.
Set Limit Hold restricts the number of Hold processes that a user can have. A
process may be held when you :Run it within Qedit and instead of terminating, the
process suspends. Examples of programs that suspend are MPEX, Spook, Suprtool,
and Equater. The Hold limit can be set to any value between 0 and 10.
Set Limit Proc restricts the number of "procedures" that a user can have concurrently
loaded (see the Proc command). The Proc limit can be set to any value between 0
and 4.
List
Set List [ option value ] ...
The Set List command controls the format and functions of the List command. The
valid options are:
Page ON | OFF
page breaks on List LP
Lines nn
lines per page with PAGE ON
Name ON | OFF
file name on each PAGE
Num ON | OFF
number on each PAGE
Title ON | OFF
title on each PAGE
Dbl ON | OFF
double-spacing of List LP
PCL nn
LaserJet fonts and orientation
Record ON | OFF
use attached printer via Record Mode
LJ nn
lines per screen for List-Jump
QJ ON | OFF
"quiet" for List-Jumping (no seq#)
Endstop ON | OFF
no "End?" question in List-Jumping.
Even ON | OFF
outputs even number of pages
Odd ON | OFF
outputs odd number of pages
Nearest ON | OFF
displays warning or nearest line
For more information on Set List options, including examples, see the List
command. For a quick list of the PCL values and their meanings, see also the QuickHelp: /hq set,list
Maxdata
Set Maxdata nnnn
(Initially: no stack expansion)
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 225
When Qedit :Preps a compatibility-mode program, it uses the current Set Maxdata
value (if any) for the Maxdata= parameter. Without Maxdata, a program may abort
with stack overflow. Programs need large Maxdata when they do sorts, call V/PLUS,
or have large data divisions in their DYNAMIC subprograms. You can still override
the default value for Maxdata on any :Prep command. Set Maxdata does not apply to
the :Run command.
Modify
Set Modify
[ option [ value ] ... ]
Qzmodify | HP | Robelle
Prompt ON | OFF
codes
Set Modify controls what style of line modify is used throughout Qedit. The defaults
are Qedit-style (^D for delete) in Modify and Before, with MPE-style (D for delete)
in Redo only. Set Mod HP forces MPE-style in all places, while Set Mod Robelle
selects Qedit-style and Set Mod Qzmod selects Qzmodify (a "what you see is what
you get" version of the Qedit-style). If you type Set Modify with no parameters you
go back to the defaults.
You also use Set Modify to control placement of the Modify line number and
redefine the Qedit-style control codes.
Prompt Option: Where to Print Line Number. Robelle Modify normally prints the
line number on the same line as the data. This makes lines look alike in List, Delete,
Add, and Modify, and also makes maintaining your tab stops simpler. On the other
hand, placing the line number on a separate line makes it easier to press Control-X
and re-enter edits. Set Mod Prompt OFF separates line and number ("_" represents
the cursor):
/set modify prompt off
/modify 10.2
10.2
Now is the time for all good people
_
/set modify prompt on
/modify 10.2
10.2
Now is the time for all good people
_
You can also use the Quiet option not to see line numbers at all.
Replacing Modify with Hpmodify. If you prefer the MPE-style edits provided in
the :Redo command, do Set Modify Hpmodify.
Qedit will accept DDD to delete characters, Ixxx to insert xxx, Rxxx to replace with
xxx, and U to undo. Other edits include > to append, >D to delete from the end,
>Rxxx to replace from the end, and D> to clear the line. HP-style modify does not
support tab stops and always prints the line number on a separate line from the data.
See :Redo command for a complete list of edits. Hpmodify applies in Modify, Redo,
Before and modify in Change and Add.
Forcing Redo to Use Qedit-Style. If you like the Qedit-style modify better than HP
style and want to use it even in Redo, do Set Modify Robelle.
Replacing Modify with Qzmodify. To make Qzmodify the style throughout Qedit,
use this command:
SET MODIFY QZMODIFY [TAE|TAEOFF]
226 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
(Default: disable Qzmodify)
The TAE options apply only if you have a Telamon Type Ahead Engine:
•
TAEOFF means to disable your Type Ahead Engine.
•
TAE means to enable your Type Ahead Engine.
•
The default is to ignore the Type Ahead Engine.
Qzmodify replaces the regular Qedit modify with a routine that allows "visual"
editing on HP terminals. Once you do Set Mod Qzmod, all modify operations within
Qedit will use Qzmodify, including Before, Redo, modify from within Change, and
the Modify command. To disable use of Qzmodify, enter Set Modify with no
parameters.
Qzmodify uses single-character reads, which you may find are a significant drain on
the resources of your HP e3000. Qzmodify will work over DS lines, but will be very
slow. However, avoid Control-Y and Break, because there are bugs in DS that
confuse the state of the terminal. Qzmodify does Setmsg OFF on your session and
Setmsg ON when it is exits; use Set Vis Msg OFF to leave Setmsg OFF all the time.
For details on the Qzmodify edit codes, either enter Qzmodify and type Control-Q or
see the Modify command.
Changing the Control Characters. You can change the default code assigned to
any function in the Qedit Modify command by using Set Modify:
^Set Modify (B ^x D ^x T ^x G ^x L ^x O ^x V ^x A ^x)
The Modify command uses nonprinting control characters for function codes. These
characters have ASCII values between 1 and 31 which are generated by holding
down the CONTROL shift key while striking another key. For example, the code for
Before is Control-B (^B, decimal 2). Because many terminals use specific control
codes for local functions (i.e., Control-B may clear the screen), Qedit allows you to
change the control codes assigned to Modify functions. However, the control codes
for Qzmodify cannot be redefined.
Using Set Modify, any or all of the control function codes can be changed. The
current codes are displayed in the Verify command. Each control-function change
consists of the first letter of the function name, followed by a space, then the
circumflex character and the desired control letter. For example:
/set modify (t ^Z)
This specifies that Control-Z (equal to decimal 26) is the control key for the
TERMINATE function. Certain control codes are not allowed and will be rejected.
Each function must be assigned a unique control character from among these:
A
B
C
D
G
K
L
N
O
P
R
T
U
V
W
Z
\
]
^
_
Open
You can control the behavior of Qedit when opening workfiles. With the first option,
you can get Qedit to warn you if the workfile you are working on is not synchronized
with the file it is based on. The second option helps you preserve timestamps on
workfiles so that you have a better idea when the workfile has actually been accessed
and modified.
Set Open Checktimestamp ON | OFF
(Initially: OFF)
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 227
Qedit stores the file modification timestamp in the workfile. It uses the timestamp to
determine whether the file has been modified since the initial Text command or since
the last time the Keep command was used.
By default, timestamp checking on the Open command is disabled. If you want to
enable it, type
Set Open Checktimestamp On
Set Open Defer ON|OFF
(Initially: Off)
The Open command is used to access a Qedit workfile for editing. Normally, the
workfile is opened with write access, which updates the "Last Modified Date" of the
file, even if you don't actually make any changes to it. However, by doing Set Open
Defer On you can instruct Qedit to "defer" the write access until a modification is
attempted. Qedit opens the workfile with Read Access initially, then reopens it with
Write Access later if it is necessary to post a modification to the file. See the Open
command for more details.
It is important to remember that certain workfile attributes and settings are normally
saved when the file is opened with write access. Some of these settings are the ZZ
marker, the current line marker (*), and the new default Keep name modified with
Set Keep Name. If you explicitly open a workfile in Browse mode or use Set Open
Defer On, these settings are not updated permanently, unless the file is re-opened
with write access.
Pattern
Set Pattern Old | New
(Initially: New)
Qedit uses "@", "#", "?", and "~" to define a pattern to be matched. The original
pattern-match logic in Qedit did not allow you to look for a pattern that contained a
literal "@". The current pattern-match logic allows "&" as an "escape" character.
This means that you can look for any reserved pattern-match character by putting &
in front of it. For example,
/list "@LISTF B&@,2@" (pat)
Note that the "escape" character does not match the ASCII escape character, whose
value is decimal 27 or octal 33. In this case "escape" means the same as the
"transparency" character in VPLUS/3000 pattern-matching: the next character
following the escape is to be treated as a literal instead of a pattern-match
metacharacter.
Two other characters have been reserved for future use: ^ and !.
To reset Qedit to the old pattern-match logic, use Set Pattern Old (the default is Set
Pattern New).
Priority
Set Priority CS | DS | ES
(Initially: logon priority)
Qedit is moved from its current priority subqueue to the one designated. You may
want to lower your priority to DS when you are about to perform tasks that will take
a long time and/or consume system resources.
228 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
If you are running the PM version of Qedit (Qeditpm.Pub.Robelle) and you are on
MPE V and your account has MAXPRI = BS, you can boost yourself into the BS
subqueue. Don't do this if there are other users on the system! If you do not have
MAXPRI = BS on your user or account, Qedit will abort if you type Set Pri BS.
Prompt
Set Prompt "string"
(Initially: "/")
The default prompt string is a slash "/", but you can change that with Set Prompt.
set prompt "Qedit /"
set prompt "Sys2 /"
You can set your prompt to be the same as some MPE/iX variable such as your
logon group or account, by putting the variable name inside the quotes. However, dereferencing MPE variables can only be done in a command file. The solution is to
put the Set Prompt command in a command file, and execute the command file from
your Qeditmgr file.
/set prompt "!hpsysname /"
Redo
Set Redo [ filename ]
(Default: none)
(Initially: temporary file)
Commands entered at the Qedit prompt are saved in something called the redo stack.
You can recall commands from this stack by using other commands such as Before,
Do and Redo. By default, the redo stack is stored in a temporary file and discarded as
soon as you exit Qedit. This does no allow the stack to be preserved across Qedit
invocations.
Set Redo allows you to assign a permanent file as the redo stack, allowing the stack
to be available for future Qedit invocations. To assign the Myredo file as a persistent
redo stack, enter
/Set Redo Myredo
If the file does not exist, Qedit creates it. Otherwise, Qedit uses the existing file. All
your subsequent commands are written to the persistent redo stack. The setting is
valid for the duration of the Qedit session. As soon as you exit Qedit, the setting is
discarded. Next time you run Qedit, you will get the temporary stack. If you want to
use a persistent stack every time you run Qedit, you have to insert the Set Redo
command in one of the Qeditmgr files.
If the file name is not qualified, the redo stack is created in the logon group and
account. This may be desirable if you want to have separate stacks. If you prefer to
always use the same persistent stacks, you should qualify the name.
The Verify command shows which stack is currently in use. If it shows
, then Qedit is using the default stack. Anything else is the name of the
file used on the Set Redo command.
Concurrency
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 229
When Qedit uses the default, the temporary stack is only accessible to that particular
instance of Qedit. You can run as many Qedit instances as you need, and each one
gets its own redo stack. You will never have concurrency problems.
If you start using a persistent redo stack, however, you might start running into
concurrency problems. A persistent redo stack can be used only by one Qedit
instance at a time. If you try to use a persistent redo stack that is already in use, you
will get the following message:
/Set Redo Myredo
EXCLUSIVE VIOLATION: FILE BEING ACCESSED
Unable to open file for REDO stack
(FSERR 90)
In this situation, Qedit continues to use the redo stack active at the time and lets you
continue working as normal.
Suprtool, STExport and Suprlink also have the ability to have permanent redo stacks.
It is advisable to have separate redo stacks for each product, because they will write
commands to each other's redo stack if you supply the same file name.
For example if you use the command
set redo myredo
you will have a redo stack called Myredo for your Qedit commands. If you exit
Qedit and run Suprtool and supply the same Set Redo command, your Suprtool
commands will be written to the same file that is used for your Qedit commands.
By default Qedit builds a permanent redo stack that contains 1,000 commands. If you
require a larger redo stack, you can specify its size by using a file equation prior to
the Set Redo command.
file myredo;disc=10000
set redo myredo
This will only be in effect the first time that the redo stack is built; subsequent file
commands will not affect the size of the redo file. You can make the file bigger by
using tools such as MPEX's %altfile command, or by building a larger file and
copying your current redo stack into it.
This command is ignored when Qedit is run in server mode.
Right
Set Right [ n ]
(Default: same as Set Length)
(Initially: same as Set Length)
Set Right fixes a right margin for listing and editing lines in your workfile. Any
existing data to the right of the margin is retained unchanged while you edit to the
left of the margin. Set Right also resets the Set Window columns. See Set Left for
setting the other margin.
Remember, the left and right margins apply to most commands, including Visual and
Keep. To reset the margin to the far right edge, Set Right with no parameter.
RL file name
Set RL [ filename ]
(Default: none)
230 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
(Initially: none)
Specifies the default RL file for :Prep commands within Qedit. You can override the
default at Prep time (e.g., :Prep ;RL=RL23). To specify no RL file in a Prep (after
doing a Set RL command), use :Prep ;RL=.
Shift
Set Shift [ DOWN n ] [ UP n ]
(Default: none)
(Initially: both 0)
Configures string logic for the built-in PROCedures, DOWN and UP. Valid values
are 0 through 4:
0
not configured
1
shift every character in the line
2
ignore characters within double quotes
3
ignore characters within single quotes
4
ignore characters within either single or double quotes
Spell
Set Spell [ option value ]...
(Default: )
Set Spell determines how words and lines are spell-checked. The options that you
can set are Exclude, Hyphen, Only, and Stop. For example, we use the following
options when we spell-check the Robelle manuals:
/set spell hyphen "\" exclude ".+"
Set Spell Exclude "string"
(Default: )
Set Spell Exclude does not spell-check lines that begin with any of the characters in
the string. This is the opposite of the Only option. Use the Exclude option to skip
lines in a file that contain commands instead of text. For example, in our Prose text
formatter, command lines begin with a "." and continuation command lines begin
with a "+". They do not need to be spell-checked.
/set spell exclude ".+"
To reset Exclude to (i.e. check all lines), use
/set spell exclude ""
Set Spell Hyphen "char"
(Default: )
Treats char as a hyphenation character. By default, all punctuation characters are
word delimiters. The hyphenation character does not delimit words, nor is it part of a
word. For example, if "\" is the hyphenation character, then "hyphen\ation" is treated
as the one word "hyphenation".
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 231
/set spell hyphen "\"
To reset the hyphen to (i.e., no hyphenation character), use
/set spell hyphen ""
Set Spell Only "string"
(Default: )
Set Spell Only will only spell-check lines that begin with any of the characters in the
string. This is the opposite of the Exclude option. Use the Only option to spell-check
specially formatted files that prefix each line with a special character. For example, if
a file prefixes text lines with the letter "T", you can spell-check only the lines that
begin with "T" or "t" with
/set spell only "tT"
To reset Only to (i.e., check all lines), use
/set spell only ""
Set Spell Stop
Immediately releases the spelling dictionaries. The most common reason for using
this option is to have Spell recognize the changes that you have made to your
SPUSER user dictionary. See the Spell command for more information about the
SPUSER user dictionary. Another reason to use this option is to release the main and
auxiliary dictionaries so that they can be updated.
/words "Robertsmith"
not found : Robertsmith
{someone's name}
/open spuser
/add ]
100
Robertsmith
//
/shut
/words "Robertsmith"
not found : Robertsmith
/set spell stop
/words "Robertsmith"
found
: Robertsmith
Statistics
Set Statistics [ ON | OFF ]
(Default: OFF)
(Initially: OFF)
If you turn Set Stat ON, Qedit prints the CPU and wall time after each command.
Stringdelimiters
Set Stringdelimiters [ POSIX | "DelimiterList" ]
(Initially: |\~{}[]_@?!#>%:'")
The initial list indicates the characters that can be used as valid delimiters.
The at sign (@) and square brackets ([, ]) are also defined as Zip characters. Thus,
they cannot be used to delimit a string unless you also change the Zip characters. The
single quote (') is removed from the list if Set Decimal is enabled (On). Quote
characters (") are always valid delimiters (i.e., they cannot be removed from the list).
232 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
From full-screen mode's homeline, a tilde always represents the most recently
accessed line number. If the tilde is removed from the delimiter list, it also becomes
a reference in line-mode to full-screen's mode most recently accessed line.
The delimiter list itself must be enclosed between a pair of valid delimiters. The new
delimiters must be chosen from the initial list. If you do not remember what the
initial list is, simply enter the Set String command with a letter or a numeric digit as
a list. For example,
/Set String "a"
Error: Not an acceptable quote char: a
select from |\~{}[]_@?!#>%:'"
You can reduce the list to just a few characters. If you want to reduce it to just a
colon (:) and a number sign (#), enter:
Set String ":#"
From that point on, only quotes, colons and number signs can surround a string.
/List "filename"
/Find #procedure#
/Delete :badline:
/Change 1/7 \oldtext\ @
{this is invalid now}
The Posix option allows you to easily bring the delimiter list down to three
characters: quotation marks ("), a backslash (\) and a colon (:). This option is useful
when working with file names that contain a lot of special characters. It reduces the
number of parsing errors.
There is no easy way to bring the defaults back. You have to enter the Set String
command with all the characters in the initial list.
Suspend
Set Suspend [ ON | OFF ]
(Default: varies)
When you Exit from Qedit, the process can either terminate ("End of program") or
suspend. If it suspends, you can reactivate it again quickly (more quickly than
running a new copy). However, if the master program does not know how to hold a
suspended process, the inactive Qedit process hangs around until you terminate the
master program. Therefore, Qedit does not suspend when it is run from the
Command Interpreter or the POSIX shell. As well, there are two ways of disabling
this feature: Set Suspend Off or Parm=32.
Tabs
Set Tabs ^char HP [ ON | OFF ]
(Default: Control-I, HP ON)
When you enter lines in Add, Modify, or Replace, Qedit looks for and interprets
"tab" keys. Each time Qedit finds a "tab", it fills the input line with blanks to the next
tab position. The default positions are every ten columns. If there are no more
positions, Qedit terminates the current line and saves the remaining text for the next
line.
Using Set Tabs, you can define the logical "tab" key to be any nonprinting control
code such as BELL (^G, decimal 7) or a printing character such as tilde (~). Control-
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 233
I is the default because it is the character most commonly used as the hardware TAB
key on terminals. All HP terminals generate a Control-I when TAB is pressed.
/set tabs ^i
/set tabs "~"
Set Tabs Hp Off tells Qedit not to set physical tab stops on your terminal (for
example it does not work on 2640 or non-HP terminals). With Set Tab Hp On (the
default), Qedit will update your terminal's tab stops at once. With Hp On, each time
you switch from Add to AQ (or any similar change that would shift the tabs left or
right on the screen), Qedit also resets the tab stops.
When using the TAB Key, remember that you must not backspace past the last tab
stop. If you do, Qedit will never see the TAB key.
Set Tabs STOP columns | NULL | nn nn nn nn ...
(Default: every 10 columns
NULL means no tabs)
By default, Qedit sets the tab stops every 10 columns (MPE) or 8 columns (HP-UX).
You can override this with Set Tabs NULL to set no tab stops, Set Tabs STOP n
(every 2 to 15 columns), or Set Tabs with a custom list of column numbers. The
maximum number of custom tab stops is 32. Remember that the columns of input
text are numbered differently depending on the source language. In SPL, Pascal,
FORTRAN, RPG, Text, Data and Job, the first column is numbered 1; in standard
COBOL, it is 7. You cannot set a tab in the first column.
/set
/set
/set
/set
tabs
tabs
tabs
tabs
stop 8
5 10 15
12 16 20
null
{every 8 columns (9 17 25 33 ...)}
{SPL,FORTRAN,RPG,Job,Text,Pas}
{COBOL}
{cancel all tabs}
Term
Set Term Columns [ nnn ]
(Default: 80)
(Initially: 80)
When you run Qedit, it tries to determine the number of columns in the display width
of your terminal. The default is 80. You can override this value by setting the display
width manually and putting the correct value in the RCRTWIDTH variable. If the
variable is not set, Qedit queries your terminal for the width. If you change it
manually from within Qedit, you can force a re-query by doing Set Visual Stop.
However, there is an easier way.
On most terminals, Set Term Columns nnn adjusts the display width of your
terminal. You must be on an HP-type terminal whose width can be varied, and the
column value nnn can be between 80 and 999. It is better to use this command to
change the number of columns than to do it manually because the command also
adjusts your terminal listing file width, the RCRTWIDTH variable, and other
parameters within Qedit.
Set Term Columns is effective only for Line mode. When you enter Visual mode,
Qedit may adjust your display width to suit the file being edited and resets the width
when you exit completely from Visual mode or Qedit.
If you have set RCRTMODEL to 1234, Qedit assumes the terminal or emulator has
limited capabilities. Qedit assumes the display width can only be changed manually.
So, if Set Term Columns is used, Qedit displays:
234 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Please change display width and press Enter:
and waits for confirmation from the user.
When you execute a command via the Home line and find yourself at the "Next
Visual?" prompt, Qedit may not have reset your display width because you often
immediately press Return to go back into Visual mode. Flipping the width frequently
is slow, erases your display memory, and sometimes causes irritating screen flicker.
Text
Set Text Exclusive [ On | Off ]
(Initial: OFF)
When you text in a file, Qedit creates a workfile and copies the contents of the
original file into it. The original file is then closed. This means that other users on the
system can text in the file and make changes of their own. This is great for
concurrency but not so great for version control.
The Set Text Exclusive option provides increased control over files that you are
editing. To enable, simply enter:
/Set Text Exclusive On
When this option is enabled, files that you text in are kept open for read-only access.
This means the files are still accessible to compilers and other programs with nonconflicting access including Qedit with Set Text Exclusive disabled. In the latter
case, a user will be able to text the file in but will not be able to save changes with a
Keep command.
Once Set Text Exclusive is enabled for all users and a particular file is being worked
on, subsequent Text commands immediately fail with:
Error:
EXCLUSIVE VIOLATION: FILE BEING ACCESSED
(FSERR 90)
On a system where Qedit is the editor of choice, we recommend that Set Text
Exclusive be inserted in one of the system Qeditmgr files (qeditmgr.pub.sys or
qeditmgr.pub.robelle).
Once a file has been texted in, the user retains control over it. The file is released
when:
•
another file is texted in
•
the workfile is closed explicitly by a Shut command or implicitly by a
New or Open command
•
the workfile is purged e.g. purge *
•
Qedit is terminated
All these operations signal Qedit that the work is done on this file. When the
workfile is shut (explicitly or implicitly), Qedit tries to clear its contents. If the file is
clean i.e. has not been modified, the file is erased. If the file has been modified,
Qedit prompts for a confirmation:
/shut
Reminder: you have not saved the changes to SHRFILE.\SRC.\DEVACCT
QED73068.SRC.DEVACCT,OLD Qedit File, # of lines=13
Clear file [no]?
If you answer No, nothing happens. The workfile remains open, the original file is
still in use and a warning is displayed.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 235
File NOT cleared
Files still open. When Text Exclusive is On, workfile must be cleared
to Shut.
If you answer Yes, the workfile is cleared and the original file is released. This
accomplishes three things:
•
releases the file so it can be used by someone else and does not remain
blocked
•
forces the user to stop and decide what should be done with the changes
•
forces the user to text the file in again to make sure he has the latest
version
Totals
Set Totals [ ON | OFF ]
(Default: ON)
(Initially: ON)
Shows the number of lines changed, deleted, added, texted and moved by each
command.
The total line is considered a "warning" or status-type message. Therefore, Set
Warnings Off will disable Set Totals, as will Option Nowarn in a User Command.
UDC
Set UDC [ ON | OFF | filename] [ LOCK ]
(Default: ON)
(Initially: OFF)
ON | filename. Turning Set Udc to ON causes Qedit to search the system UDC
catalog, Command.Pub.Sys, looking for the UDC files established with :Setcatalog.
Qedit simulates those UDCs, either on MPE V or MPE/iX, but not every feature is
emulated (for example, Hpmsgfence). Qedit searches the user UDCs first, then the
account UDCs and the system UDCs. In this way, the system UDCs cannot be
circumvented.
Set Udc with a filename causes Qedit to simulate the UDCs in that file, without
searching Command.Pub.Sys (this is faster, and there is no need for a :Setcatalog
command). You can repeat the command to load up to 20 UDC files (either
permanent or temporary). You may need to specify file names explicitly if you have
followed VESOFT's advice regarding access to Command.Pub.Sys.
Set Udc OFF disables all recognition of UDCs by Qedit. The default is OFF,
meaning no simulation of UDCs. Use Set Udc OFF and :Setcatalog with no
parameters to un-catalog a user UDC file that you are editing. Otherwise you get
Duplicate File errors on the Keep of the revised UDC file.
Lock Option. Once the lock option is entered, no further Set Udc commands are
accepted by Qedit. This allows the system manager to control UDC processing via a
Set Udc command in the Qeditmgr file. Note: For compatibility reasons, Set Udc
Lock implies Set Udc On (i.e., global search).
236 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Undo
Set Undo ON | OFF
(Initially: ON in session, OFF in batch)
"Undo" is the ability to cancel the effect of previous commands that modified your
file. By default, Undo is enabled for interactive use and disabled in batch use of
Qedit.
Set Undo allows you to override that default, or even disable Undo around some very
large editing tasks, to speed it up.
Varsub
Set Varsub ON | OFF
(Default: Off)
When this option is enabled, Qedit parses entered commands looking for variable
names. If a variable name is found and currently exists, its value is substituted before
the command is executed. If the variable does not exist, the variable name is left
unchanged.
Warning: The trailing
comments limitation is an
incompatibility with older
versions.
Qedit commands are added to the Redo stack before the substitution occurs i.e. with
the variable name. So, if the variable value changes between the time the command
is entered and the time it is retrieved from the stack, the results may be different. It's
also important to note that commands related to Redo stack operations such as
Listredo, Do, Before can not have trailing comments enclosed in curly braces
anymore. The comments are not removed and likely cause a syntax error.
/listredo { see which commands I have entered so far }
Bad option, expecting ;UNN ;ABS ;REL or ;OUT
/listredo
1) t testisql
2) l "!myvar"
3) s varsub on
4) l "!myvar"
5) setvar myvar "qed"
6) l "!myvar"
7) LISTREDO { SEE WHICH COMMANDS I HAVE ENTERED SO FAR }
Variable names are identified by a leading exclamation point "!". For example,
!HPACCOUNT is replaced with the current value of the HPACCOUNT system
variable. Since the exclamation point is a valid Qedit string delimiter (Verify
Stringdelimiter), Set Varsub On automatically removes it from the string delimiter
list.
If you wish to prevent variable substitution and have Qedit interpret the exclamation
point at face value, put 2 exclamation points as in !!HPACCOUNT.
Notes
The Stream command replaces all exclamation points found in column 1 of a file
with a colon. So, if a variable name appears at the start of a line, it would not be
substituted in the resulting batch job and would likely cause the job to abort
For example, let's say you have:
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 237
!job testjob,user.acct
!setvar myvar "showtime"
!run qedit
set varsub on
!myvar
e
!eoj
If you streamed this file, the batch job would look like this:
:job testjob,user.acct
:setvar myvar "showtime"
:run qedit
set varsub on
:myvar
e
:eoj
:myvar would not get subtituted and cause an error. To work around this problem,
simply insert a space in front of the exclamation point on the offending command
inside Qedit.
Visual
Set Visual keyword [ value ] ...
(Default: see Visual)
The Set Visual command controls how Visual mode operates. The following section
shows how to change the number of lines per screen, how to set where the current
line will appear, and other options. New users should use Set Visual Update On. This
option does an automatic screen update whenever you press any function key. This
saves your changes even if you forget to press Enter when changing screens.
Here are the Set Visual options, with the minimal abbreviations shown in capitals:
238 • Qedit Commands
Above
show 0 to 9 lines above * line?
ATtachmate
allow for KEA! emulator to widen to 500 columns
BELL
define printable substitute for "Bell"
Below
show 0 to 99 lines below * line?
BUF
change size of screen buffer
Carry
carry 0 to 9 lines to next page?
CLEardisplay
clear all of display memory or not?
Cutcurrent
keep cursor near original current line after cut-and-paste
Editonopen
return to full-screen after Open at Next Command prompt
Esc
define printable substitute for "Esc"
Field
redefine the GG/VV field separator (~)
HALfbright
use fewer enhancements in the status line
Hidetags
hide +1,+2 line tags with display enhancement
Home
put cursor on home line or * line?
HOStprompt
re-enable Reflection host prompt
Ignorelf
accept screens without line feeds
Inschar
enable Insert Character on your terminal
Label
load function key labels?
Marginfixed
do not change terminal right margin
Qedit 5.9 for HP e3000 User Manual
MSG
leave Setmsg OFF or mesg n on exit from Visual
Renum
renumber screen if out of line numbers?
Roll
adjust number of lines on UP (F2)
Save
save and restore existing function keys?
SI
define printable substitute for "ShiftIn"
SO
define printable substitute for "ShiftOut"
Stop
reset Visual mode, forces restart.
TAB
define printable substitute for tab characters
TAE
make Qedit work with Telamon Type Ahead Engine
Update
automatically update screen every time?
Widen
whether to go beyond 80-columns of display?
Wordwrap
enable wordwrap in Reflection?
Above
Set Visual Above [ n ]
(Default=0)
By default, the * line is the first text line on the page. Set Vis Above specifies that
from 0 to 9 lines are to be shown above the * line.
ATtachmate
Set Visual Attachmate OFF | ON
(Default=Off)
When enabled and used in conjunction with the Attachmate's KEA! Terminal
emulator, Qedit is able to work with up to 512 colums.
Bell
Set Visual Bell [ 'nnn | "char" ]
(Default=None)
If you edit text containing Bell characters, they will appear as dots with a "?" at the
left of the line. Otherwise, they would disappear from your file when you press Enter
because Bells are not saved in display memory. To get around this problem, you can
define another character as a translation for the Bell character. For example, Set Vis
Bell "|" defines "|" to represent Bell.
When Visual needs to print a Bell on the screen, it prints a "|" instead. When Visual
sees any "|" on the screen, it converts it into a Bell internally. To avoid turning every
occurrence of the "alias" character in your file into a Bell, Visual prints a "?" for any
line with a valid alias already in it and will not let you update that line in Visual
mode (use Modify instead).
Below
Set Visual Below [ nn ]
(Default=19)
By default, Visual shows 19 lines below the * line. Set Vis Below can change this to
0 through 99 lines. Qedit reads and writes a fixed number of characters per screen
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 239
(see Set Visual Buf). If you Set Vis Below to a large number of lines such as 99,
Qedit may not have room in the screen write buffer for all of the lines requested.
Qedit prints an error message, attempts to reduce Set Vis Below to a value that will
work, and returns you to Line mode. You type "vis" to restart Visual mode.
Buf
Set Visual Buf nnnn
By default, Qedit reads and writes a maximum of 10,000 characters per screen. Set
Vis Buf will increase or decrease the size of the screen buffer. The minimum size is
2,000 characters and the maximum is 30,000. Increasing the buffer size may increase
the load on your network -- watch for hangs, delays, and write errors. On MPE V the
default is 6,000 and the maximum is 8,000.
Carry
Set Visual Carry [ n ]
(Default=1)
The F5 and F6 keys move the screen display Backward and Forward one page. In
doing this, they carry over one line from the previous display for context. You can
vary the number of lines carried over from 0 to 9 with Set Vis Carry.
Cleardisplay
Set Visual Cleardisplay [ OFF ]
(Default=On)
This option tells Visual mode not to clear all of display memory before writing the
next page of text. Instead, Visual erases enough lines at the start of display memory
to make room for the Visual screen. This means that a Home Down will still show
you what was last done in Line mode and a Home Up will redisplay the Visual
screen. When you press Enter, only the Visual screen is transferred, up to the //
template line.
Do not use this option if you only have a couple of pages of display memory, or with
hpterm on HP-UX workstations (although it works fine with PC terminal emulators
and Qedit/UX).
In Reflection for Windows (versions earlier than 3.70), changing the display width
also clears display memory, beyond the control of Set Vis Cleardisplay. If you want
to retain your display memory, you also need to use Set Vis Widen Off.
Cutcurrent
Set Visual Cutcurrent [ ON | OFF ]
(Default=On)
This option tells Qedit where to put the current line marker after a cut-and-paste
operation. By default, Qedit sets the current line at (or near) the first pasted line. If
you turn the option Off with Set Visual Cutcurrent Off, Qedit tries to keep the
current line as close as possible to the current line position before the paste
operation.
This option only affects full-screen mode editing.
240 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Editonopen
Set Visual Editonopen [ ON | OFF ]
(Default=On)
While in full-screen mode, you can enter MPE commands at the home line. Doing so
causes Qedit to temporarily switch to line mode and prompt you for more commands
with NEXT COMMAND [VISUAL]. You have to hit RETURN or enter VISUAL to
return to full-screen mode.
There is one exception to this. If you enter an Open command at the prompt, Qedit
automatically switchs back to full-screen mode after opening the file. This is the
default behavior.
If you wish to disable this option, use Set Visual Editonopen Off. When disabled, an
Open command is treated as any other command. In other words, Qedit continues to
prompting for more commands until you explicitly tell it to go into full-screen mode.
Esc
Set Visual Esc [ 'nnn | "char" ]
(Default=None)
If you edit text containing Esc characters, most will appear as dots with a "?" at the
left of the line. Otherwise the escape sequence would be executed by your terminal
and be lost. To get around this problem, you can define another character as a
translation for the Esc character. For example, Set Vis Esc "\" defines "\" as meaning
Esc.
When Visual needs to print an Esc on the screen, it prints a "\" instead. When Visual
sees any "\" on the screen, it converts it into an Esc internally. To avoid every valid
occurrence of an alias character turning into an Esc, Visual mode looks for alias
characters that already occur. Any line with a valid alias in it is printed with a "?"
and Visual will not let you update it (use Modify instead).
Field
Set Visual Field [ 'nnn | "char" ]
(Default=~)
When you divide a line with VV or glue lines with GG, Qedit looks for a special
character in the first line as the field separator. The field separator is the ~ (tilde) by
default, but you can redefine it to another character with Set Vis Field if you have
many natural occurrences of the tilde in your text. For example, Set Vis Field "|"
redefines the field separator as |.
Halfbright
Set Visual Halfbright [ ON | OFF ]
(Default=Off)
The standard status line uses display enhancements all across the screen to highlight
the status fields. For a status line with fewer display enhancements, use Set Vis
Halfbright On.
Hidetags
Set Visual Hidetags [ ON | OFF ]
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 241
(Default=Off)
The Hidetags option replaces the +1,+2,+3 line tags on your screen with a Security
Video enhancement and some line drawing characters. This makes the Visual screen
cleaner and less confusing. However, the option only works if your terminal supports
both Security Video and line drawing. It works on the 700/92, the 2392, the Cumulus
terminal, and with Reflection 1 for DOS. It fails with hpterm (HP-UX), on some
versions of Reflection for Windows and Macintosh, and all versions of Session.
Home
Set Visual Home [ ON | OFF ]
(Default=On)
After processing the Enter key or a function key, Visual places the cursor on the
===> line. This makes it convenient to enter a command. You must then press
Return a few times to move the cursor down into the text. Set Vis Home Off puts the
cursor at the first column of the * line instead. After a Find or Findup, this means the
cursor will appear on the first character of the found string.
Hostprompt
Set Visual Hostprompt [ ON | OFF ]
(Default=Off)
If you use a single copy of Reflection alternately between HP-UX and MPE, you
may run into a problem with Set Host-Prompt "^Q". The Reflection host prompt
must be configured for Visual mode to work. However, on HP-UX the host prompt
must be disabled in Line mode for Reflection file transfer to work. Therefore,
Qedit/UX enables the host prompt upon entry to Visual and disables it upon Exit. If
you then switch to MPE, Qedit's Visual will fail because the host prompt is disabled.
Set Vis Hostprompt On forces the Reflection host prompt to ^Q in Visual. The
default for this option is Off, since the host prompt should usually be set to ^Q
anyway. You should only need this if you switch between MPE and HP-UX with the
same copy of Reflection and use Qedit Visual on both systems.
Ignorelf
Set Visual Ignorelf [ ON | OFF ]
(Default=Off)
Normally, when Qedit reads the screen it finds a Return and line feed at the end of
each line. Qedit uses this information to divide the characters of the screen read into
lines and then match them up with the lines in your file. However, some networks
strip the line feed from the lines, sending only the Return. In this case, Qedit will
print an error such as "Missing status line" and the qscreen dump will indicate that
Returns were found without line feeds. It may be easier to reconfigure Qedit than
your network: the Set Vis Ignorelf On option directs Qedit to accept screens with
only a Return at the end of each line and without the line feed.
Qedit enables the Ignorelf option whenever it is being run on the Qcterm terminal
emulator.
Inschar
Set Visual Inschar [ ON | OFF ]
(Default=Off)
242 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
By default, Visual mode disables Insert Char and you must enable it after each time
you press Enter or a function key. Set Vis Inschar On tells Visual to enable Insert
Char each time it displays the screen.
Label
Set Visual Label [ ON | OFF ]
(Default=On)
When you memorize the eight function keys, you can speed entry into Visual by
disabling the "labels" on the screen. Use Set Vis Label OFF. This only works with a
2645 terminal, where the labels must actually be painted into the display memory
every time a new page is written.
Marginfixed
Set Visual Marginfixed ON | OFF
(Default=none)
Qedit normally adjusts the terminal right margin and display width based on the file's
record length. This caused some terminal emulators like hpterm to behave erratically.
When Marginfixed is enabled, Qedit does not change the terminal settings. It
assumes the right margin is the physical display width. This should work properly as
long as the user let's Qedit poll the terminal for the information. If the user decides to
override this function by setting the RCRTWIDTH variable or change the width with
Set Term Columns, Qedit trusts that the user has set the terminal properly.
Users should be aware of two things when Set Marginfixed is ON. If a file is
narrower than the configured width, nothing prevents the user from entering text
beyond the file's right edge. This extra text will simply be ignored.
If the file is wider than the configured width, Qedit tries to display as much text as it
thinks it can. This causes the text to overflow. However, instead of truncating the
extra characters, the emulator writes them out on the last displayable column. For
example, if a file has 100 characters but the configured width is 80, the first 79
characters are displayed correctly. Characters 80 through 100 are written to column
80. The net result is characters 80 to 99 are lost and character 100 ends up in column
80 on the screen.
Msg
Set Visual Msg [ OFF | ON ]
(Default=On)
Visual always disables messages from other users (using Setmsg OFF on MPE and
mesg n on HP-UX). On MPE, this is why a Showjob will show QUIET. Normally,
Visual re-enables messages upon Exit (using Setmsg ON on MPE and mesg y on
HP-UX). If you want messages to be left disabled at all times, use Set Vis Msg OFF.
These same rules apply to Qzmodify.
Renum
Set Visual Renum [ ON | OFF ]
(Default=On)
When you insert lines, Qedit attempts to assign them new line numbers between the
existing lines. Sometimes this is impossible, as between 500.01 and 500.011. In this
case, Qedit will renumber the lines on your screen to make room for the new lines.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 243
Qedit uses the appropriate Increment value that ensures proper renumbering. The
value it chooses might be different from the current Increment value.
Although this value also affects operation of the Add command in Line mode, it does
not affect the Divide command.
You can disable this option with Set Vis Renum Off.
Roll
Set Visual Roll [ nn ]
(Default=6)
The F2 key means "roll the current screen up" by 6 lines. You can vary the number
of "roll" lines from 1 to 20 by doing Set Vis Roll nn. You can also do an individual
"roll" of any size by pressing Home Up, typing +n or -n and F7.
Save
Set Visual Save [ Fast | ON | OFF | 1 ]
(Default=Off)
Set Vis Save ON causes Qedit to save your function keys upon entry into Visual and
reset them again on exit. The first execution of this command must occur before Set
UDC, since they both allocate memory space from the same pool. If you only want
to save the keys on the first entry into Visual (and reset them to the same values on
every Exit), use Set Vis Save 1.
The 700/92 terminal and Reflection have the ability to save and restore the current
user function keys within the terminal memory. If you do Set Vis Save Fast, Visual
will take advantage of this feature, which is much faster and invisible to the user.
This feature only works on Reflection if the Terminal ID is configured to 700/92 and
on versions greater than 3.3 (DOS), 3.6 (Macintosh), or 3.7 (Windows). If Qedit
decides that you do not have this feature, it will revert to a regular Set Vis Save On.
Screen
Set Visual Screen [ ON | OFF ]
This option, only available on HP-UX, controls which full-screen editing interface
Qedit will use. When it is set to Off, Qedit uses Visual mode. When it is set to On,
Qedit uses Screen mode. On HP terminals, Off is the default; on VT terminals, On is
the default.
SI
Set Visual SI [ 'nnn | "char" ]
(Default=None)
If you edit text containing ShiftIn characters, they will not appear on the screen.
Even worse, if there is ShiftIn character but no ShiftOut character preceding it on a
line, the ShiftIn character disappears from your file when you press Enter. This is
done "on your behalf" by the terminal or terminal emulator. To get around these
problems, you can define another character as a translation for the ShiftIn character.
For example, Set Vis SI "|" defines "|" to represent ShiftIn.
When Visual needs to print a ShiftIn on the screen, it prints a "|" instead. When
Visual sees any "|" on the screen, it converts it into a ShiftIn internally. To avoid
turning every occurrence of the "alias" character in your file into a Shiftin, Visual
244 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
prints a "?" for any line with a valid alias already in it and will not let you update that
line in Visual mode (use Modify instead).
SO
Set Visual SO [ 'nnn | "char" ]
(Default=None)
If you edit text containing ShiftOut characters, they will not appear on the screen.
From the location of ShiftOut, the display switches to the alternate character set
which typically is the Line Drawing set. When you press Enter, the terminal or
terminal emulator automatically inserts an escape sequence in front of the ShiftOut.
The escape sequence is )B. To get around this problem, you can define another
character as a translation for the ShiftOut character. For example, Set Vis SO "|"
defines "|" to represent ShiftOut.
When Visual needs to print a ShiftOut on the screen, it prints a "|" instead. When
Visual sees any "|" on the screen, it converts it into a ShiftOut internally. To avoid
turning every occurrence of the "alias" character in your file into a ShiftOut, Visual
prints a "?" for any line with a valid alias already in it and will not let you update that
line in Visual mode (use Modify instead).
Scrollup
Set Visual Scrollup 'nnn | "char"
(Default="-")
You can enter a minus sign in one (or both) copy/paste columns in full-screen mode.
A single character scrolls up the number of lines defined in the |5Set Visual Roll
option. Enter 2 minus signs to scroll up twice the number of lines and so on.
The minus sign is the default scrollup character. You can change it to another
character that you may find easier to type. It must be a printable character and must
not be a valid copy/paste code. Valid codes are: A B C D F G H J M P R
V Z ? !. Use Set Visual Scrollup "c" to change the character.
You can enter Set Visual Scrollup "" to reset it back to the default character.
Stop
Set Visual Stop
The Set Visual Stop command resets Qedit to an uninitialized state. On your next
function, Qedit will re-identify your terminal and re-check the entire context. Use
this when changing your terminal configuration while inside Qedit.
Tab
Set Visual Tab [ 'nnn | "char" ]
(Default=None)
If you edit text containing tab characters, most will appear as dots with a "?" at the
left of the line. Otherwise the tab characters would be executed by your terminal and
be lost. To get around this problem, you can define another character as a translation
for the tab character. For example, Set Vis Tab "\" defines "\" as meaning tab.
When Visual needs to print a tab on the screen, it prints a "\" instead. When Visual
sees any "\" on the screen, it converts it into a tab internally. To avoid every valid
occurrence of an alias character turning into a tab, Visual mode looks for alias
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 245
characters that already occur in the text. Any line with a valid alias in it is printed
with a "?" and Visual will not let you update it (use Modify instead).
TAE
Set Visual TAE [ ON | OFF ]
(Default=OFF)
To make Visual mode work with Telamon's Type Ahead Engine, use Set Vis Tae
On. Qedit sends out a Control-A "A" upon entry to Visual mode and a Control-A
"V" on exit. These special codes disable and re-enable the TAE. However, Control-A
may be a code for your modem or network and could cause a problem. If you do not
have a TAE, the "V" may appear on your screen upon exit from Visual mode.
Update
Set Visual Update [ ON | OFF ] [ Except 7 ]
(Default=Off)
If you find that you are losing work by pressing F5 or another function key before
you have saved your screen work with the Enter key, this option is for you. When
Set Vis Update is ON, Qedit does an automatic screen update with every function
key. This makes it almost impossible to lose your changes, but it does slow down
Visual mode. However, you may do *> F7 or *< F7 to move ahead or back one page,
without updating the current page. Note: to refresh the screen, type * in the home
line before pressing any function key or Enter.
If you want to be able to execute a command via F7 without updating the screen, use
Set Vis Update On Except 7.
Widen
Set Visual Widen [ 76 | 80 | OFF ]
(Default=80)
The Widen option controls whether and when Visual will request and use more than
80 display columns on your terminal. For example, you can control whether to
switch the 700-series terminal into 132-column mode and widen Reflection's Display
Memory. The default value is Set Vis Widen 80, which causes Visual to go into
wider-mode whenever Length is greater than 80 columns. Therefore, with this value
Visual will switch your 700 series terminal into 132-column mode and expand the
width of Reflection's Display Memory. Set Vis Widen Off restricts Visual mode to at
most 80 columns.
Reflection version 5.x and later allows you to set the display width to a value
between 80 and 512. Qedit can detect this feature and use it whenever possible.
Qcterm emulates a 700/92 terminal but supports up to 200 columns. Full-screen
mode takes advantage of the extended width when appropriate.
If Visual switches into 132-column mode when the Length value for your file is
higher than 80 columns, this means that a Job file with exactly 80 columns will not
go into 132-column mode and you won't be able to see columns 77 through 80.
However, you can reconfigure Visual to switch into 132-column mode when Length
is greater than 76 by doing Set Vis Widen 76.
Some new versions of Reflection will automatically switch into 132-column display
when Qedit asks to widen display memory. To have Qedit follow the Set Vis Widen
rules, you must have Reflection 4.2 for DOS, Reflection 3.6 for the Macintosh,
Reflection 4.0 for Windows; add 20,000 to the value in your RPCVERSION JCW.
246 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
In some versions of terminal emulators, you have to explicitly tell the software
which type of graphics adaptor you have. You need to refer to your computer
manual, or use the MSD utility program included with newer versions of DOS and
Windows. The RCRTMODEL JCW is also useful for controlling 132-column mode.
Wordwrap
Set Visual Wordwrap [ ON | OFF ]
(Default=Off)
The Set Vis Wordwrap option enables wordwrap for new lines. This makes Visual
mode much better for entering memos and documentation. If you have Reflection
4.00 for DOS or Reflection 5.0 for Windows, Set Vis Wordwrap allows you to keep
typing at the end of your line. There is no need to press Return. The overflow words
will automatically be moved to the following line. Words will not be split arbitrarily.
The Reflection Wordwrap feature only works when entering new lines. It does not
work with INS CHAR. Because it does not work in Line mode, Qedit enables and
disables it as you enter and exit Visual. The Reflection configuration setting called
Force-80-Columns must be set to No for Wordwrap to work properly. If you cannot
turn off this setting for compatibility with other software, then try Set Visual Widen
Off in Qedit.
XX
Set Visual XX [ startline [ / endline ] ]
(Default=reset)
Set Visual XX defines the lines that should be excluded from the full-screen mode
display. Excluded lines are replaced by a single line.
--- Excluded Area --- 10/34.5
This line shows the line numbers which are currently excluded. If no parameters are
specified, the current excluded area is reset. An excluded area must have a start and
an end line. If only startline is specified, the excluded area is incomplete. An
appropriate message is going to be displayed on the status line next time the user
goes into full-screen mode.
To complete the excluded area, enter another Set Visual XX command with another
line number. This number is going to be used as the endline. Of course, you can
specify both startline and endline on a single command.
/Set Visual XX 5
/Set Visual XX 10
/Set Visual XX 5/10
{ Sets the start line. XX incomplete. }
{ Sets the end line. XX=5/10
}
{ Sets XX to 5/10 }
Labels in Line Mode
This is not a Set command, but a JCW value.
Normally, Qedit always displays the modes keys except within Visual mode. You
have the option of displaying the User Keys instead, or removing the labels from the
screen. This is done by setting an MPE JCW before running Qedit:
:setjcw rlabeldefault = 2
{user keys}
Valid values for this JCW are as follows:
0 don't care, Qedit displays modes
1 terminal has NO labels (2645)
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 247
2 display user keys
3 display modes keys
4 remove labels from screen
5 display default F1-F8 key labels
6 display the Qedit labels
These values define which key labels will be displayed when you are in Line mode
rather than Screen mode. To change your choice while within Qedit, set the JCW and
then do Set Vis Stop to force Qedit to re-initialize.
Technical Notes
On MPE, Qedit opens the Visual terminal file with file name QEDCRT, REC=-6000.
Qedit turns echo off (echo is reset to its previous state on exit), disables the Break
key, and disables messages from other users (:Setmsg OFF on MPE and mesg n on
HP-UX). Visual disables your Type Ahead Engine (if you have one and have not
done Set Vis TAE Off), disables MPE/iX typeahead, and puts your HP terminal into
block-mode, page-mode, but with Format off. Qedit loads the function keys with
their default values, and writes descriptive labels for them.
Warnings
Set Warnings [ ON | OFF ]
(Default: OFF)
(Initially: ON)
When you put commands in a usefile for an end-user, it is often irritating to have
Qedit print numerous warnings and status messages (i.e., Shut Qeditscr, * = 55,
Warning: Noline, etc.). Set Warnings OFF will suppress all of those warnings. It also
suppresses printing the line when you enter a line number to move the current
position (i.e., /55 sets * to 55, but does not print line 55).
Whichcomp
Set Whichcomp keyword value ...
(Initially: COBOL, FORTRAN 66, Pascal V, IN Robelle)
When you use :Compile to compile your program, Qedit often has a choice of
compatibility mode (CM) compilers. Set Whichcomp selects which compiler
programs to use as the default for each language, as well as where to look for it. The
syntax is as follows:
Set WHichcomp [ options ]
248 • Qedit Commands
Cobol
[ 68 | 74 | 85 ]
I, II or II,coboliix
default is none
Fortran
66 | 77
FORTRAN or FTN
default is 66
In
Sys | Robelle
Pub.Sys or
Q.Robelle
default is in Robelle
Pascal
V|R
Pascal/V or
Pascal/Robelle
default is Pascal V
Qedit 5.9 for HP e3000 User Manual
COBOL. By default, the :COBOL command runs the compiler program named
COBOL. This may reside in Q.Robelle or Pub.Sys (see below). The compiler named
"COBOL" may contain any version of COBOL, but is usually COBOL-74 on MPE
V and native-mode COBOL on MPE/iX. If you want to run some other program file
when you do :Cobol or :Compile, Set Which COBOL will select either COBOLI
(68), COBOLII (74), or COBOLII,COBOLIIX (85). Remember, you can always use
the :COBOLI and :COBOLII commands to invoke those two specific compiler
programs.
FORTRAN. By default, :FORTRAN runs the program named FORTRAN, which is
usually FORTRAN 66. Set Which FORTRAN 77 causes the :FORTRAN command
to invoke the compiler program named FTN instead. If you need access to both
compilers, don't use Set Which, but use :FTN and :FORTRAN instead.
In Sys|Robelle. By default, Qedit looks in the Q.Robelle group for copies of the
compatibility-mode MPE compilers which have been "qedified" to read Qedit
workfiles. If a compiler is not found there, Qedit switches to Pub.Sys. You can use
Set Which In Sys or Set Which In Robelle to force where Qedit will look first on the
next compile. If it doesn't find the compiler where you say it is, it will reverse the
setting of the Sys/Robelle flag, so that next time it has a better chance of finding it.
Pascal. By default, the :Pascal command runs the HP Pascal V compiler. An
alternative is Pascal/Robelle (in the Greer account), selected via Set Which Pascal R.
Window
Set Window ( [ window ] )
(Default: all columns, exact match)
Set Window establishes the default window, or conditions, for string searches in all
Qedit commands. You can override the default by specifying an explicit window in
any command (e.g., list ".BEGINKEY" (1/10 UPS) ). Once a window is
set, it remains in effect until the next Set Window command. See the Change
command and the "Glossary" for further details on window.
The window itself consists of two parts: a range of column numbers to search, and
four independently enabled options that determine how to select a line.
( [ column / column ] [option ...] )
A column is a number between the Left and Right margins of the file. Qedit searches
only the specified range. An option is one or more of these:
[NO]Match
select lines with[out] string
[NO]Upshift
upshift before searching [or not]
[NO]Smart
ensure match is a "symbol" [or not]
[NO]Pattern
string is a pattern to find [or not]
[NO]Regexp
string is a regular expression to find [or not]
The default window is all columns, Nosmart, Noupshift, Match, Nopattern and
Noregexp.
A pattern may include at-signs (@) to match anything, # to match a single numeric
character, ? to match a single alpha-numeric, and tilde (~, wavy line) to match zero
or more blanks. Any other character must be matched exactly. (To match a pattern
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 249
character itself, precede it with an ampersand: "& ".) For example, to look for
"QEDIT" followed by "TOOL" in the same line, use:
/set window (pattern upshift)
/list "@Qedit@Tool@"
Either or both parts of the window can be Set in one command:
/set
/set
/set
/set
window
window
window
window
(1/10)
(smart upshift)
(1/20 upshift)
(pattern)
To reset the window to the defaults, enter:
/set window ( )
Work
Set Work keyword value ...
(Initially: Block 8, Temp ON, Labels OFF,
Jumbo ON, Random OFF, Trailingspaces OFF, Size 3200)
Set Work specifies the default size, attributes and functions of Qedit workfiles. The
syntax of Set Work is as follows:
Set WORK [ options ]
Jumbo
ON | OFF
Control use of
Jumbo workfiles
default ON
Random
ON | OFF
Control use of
random scratch file
name
default OFF
Block
nn
Average lines
expected to fit per
block
default is 8,
minimum is 2
Labels
ON
Force Text to retain
user labels
default OFF
Size
nn
Default size for new
workfiles in lines
default 3200, min.
200, max.
99,999,999
Temp
ON
Create Qeditscr
temporary workfile
or random
scratchfiles
default ON
Trailingspaces
ON | OFF
Preserves or removes default OFF
trailing spaces
Workfile Size. Qedit workfiles have a file code of 111 and their physical block size
is 512 bytes (original format), 1,024 bytes (Jumbo format), or 8,192 bytes (WideJumbo format). As many lines as possible are compressed and packed into each
block, making it difficult to decide on the exact number of blocks to allocate for a
new Qedit file. The default workfile size is 3,200 lines, assuming that each block can
fit 8 lines. You can make the default workfile size smaller or larger by using Set
Work Block nn Size nn. A workfile in original format cannot contain more than
65,535 lines or 32,767 blocks. A Jumbo or Wide-Jumbo workfile can hold up to
99,999,999 lines (maximum size is 4 GB). To make very small default workfiles, use
250 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Set Work Block 16 Size 200. To make the largest possible workfiles, use Set Work
Block 2 Size 99999999. In either case, the Text command will increase the size of a
new workfile above the default if needed to hold the file being copied.
Qeditscr. By default, Qedit creates a temporary workfile called Qeditscr whenever
necessary. You can force Qedit to use only named (by you), permanent workfiles
with Set Work Temp OFF (this might be helpful if you use unreliable telephone
lines).
If you have Set Work Random ON, Qedit will use a random file name (determined
when Qedit first starts up) in the form QEDnnnnn. This allows you to have multiple
Qedit sessions running at the same time. Even though random scratch files are
created in MPE's permanent domain, they are temporary in the sense that they are
purged upon exit.
You must have Set Work Temp ON in order to use random scratch files.
User Labels. Set Work Labels ON forces the Text command to retain user labels
unless you do Text filename,Nolabels (the default is to discard the user labels unless
you do Text filename,Labels).
Trailing Spaces. By default, Qedit removes trailing spaces on all lines in a variablelength file. Set Work Trailingspaces ON requests that Qedit preserves trailing spaces
and make them significant characters. The option also allows creation of odd-length
lines. Once enabled, all workfiles created or opened from that point will have
trailingspaces preserved. To check the current status, do:
/Verify Work
{ Checks global setting }
Set WOrk Jumbo ON Block 8 Labels OFF Temp ON Size 3200 Random ON
Set WOrk TRailingspaces ON
/Verify Keep
{ Checks current workfile }
Set Keep Ascii OFF Cctl OFF COde 0 Lab 0 Num OFF Var ON Checktimestamp
ON
Set Keep COBfree ON NAme AFILE.GROUP.ACCT
Set Keep LF ON
/Verify Info
Saved modification timestamp 2003/04/30 13:23:17
Trailing spaces preserved
The last line shows that trailing spaces are preserved in this workfile. If the option is
disabled, that line reads Trailing spaces trimmed. Disabling the global
setting with Set Work Trailing Off does not disable the option in the workfile. You
have to clear the workfile after disabling it.
Wraparound
Set Wraparound [ chars | ON | OFF ]
(Default: ON)
(Initially: OFF)
The Wraparound option is intended to make line-overflow in the Add command
more friendly. When it is enabled and a line-overflow occurs during entry of new
lines, Qedit splits the long line between two "words" and prompts you with the
overflow words on the next line. An appropriate continuation line is generated for
FORTRAN and COBOL source files. There is no wraparound capability in Visual
mode, due to limitations of the HP terminals. The Reflection for DOS terminal
emulator, however, can do wraparound in Visual mode. See Set Visual Wrap for
details.
The chars option allows you to specify the maximum number of characters you will
be able to type before pressing the Return key. You can specify any number of chars
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 251
between 150 and 5000. When Wraparound is ON, and no chars parameter is
specified, the default maximum number of characters that you can type before
pressing Return is 256.
When you do an Add command, you can "burst" enter an entire page without looking
at the screen. Do not press Return at the end of each line -- just keep typing. Qedit
will put the words into lines for you. Press Return once only at the end of each page
of text.
At the end of a paragraph (or any other time that you need to do an "end of line"),
type Control-C and start typing the next line. Do not put a space after the Control-C
unless you want the next line indented. For a blank line, press Control-C twice in
succession.
You end the Add command as always by entering "//". Then you may use Visual or
Modify to correct any typing mistakes you may have made. Qedit will fill the words
into lines that are less than or equal to the current Set Length value. To create lines
of a specific length, use Set Lang Data and Set Length.
X
Set X keyword value ...
(J=justified)
(Initially: List ON Tab OFF Local OFF Global OFF)
Set X configures automatic tagging of source changes in COBOL programs. The
syntax of Set X is as follows:
Set X [ options ]
["xx"][dateform]["xx"]
define the tag content
default is a null string
List ON | OFF
control the display of tag
columns
default ON
Tab ON | OFF
allow manual editing of tag
columns
default OFF
Local ON | OFF
tag value saved in workfile
default OFF
Global ON | OFF
allow use of local tags
default OFF
Null
reset global and local tags
To check on the current tag value and options, use Verify X.
If you want all COBOL changes to be tagged, all files must be have Set Lang
Cobolx, not Set Lang Cobol. You can enforce this for all users by putting Set Lang
Cobolx All On into your Qeditmgr file.
Tag format. The Set X command allows several formats for the date tag, plus the
ability to replace, precede or follow the date with a short string. Once you have
configured your "X" tag, Qedit will automatically mark all changed lines in
COBOLX files with that tag in columns 73 to 80.
The dateform parameter can be any of these options:
Keyword
252 • Qedit Commands
Sample
DATE
22 NOV99
DDMMMYY
22 Nov99
Qedit 5.9 for HP e3000 User Manual
CCYYMMDD
19991122
YYMMDD
991122
MMDDYY
112299
DDMMYY
221199
DDMMMYY and CCYYMMDD occupy 8 characters, but YYMMDD, MMDDYY
and DDMMYY occupy only 6. Therefore, the last three can be combined with a
string giving your initials, before or after today's date.
/set x "rg" yymmdd
{tag is "rg991122" }
Null vs Blanks
Entering Set X without parameters, Set X Null, or Set X "" effectively turns off the
tagging feature. Tags on modified lines are not changed. Lines without tags do not
get one. Lines that already have tags retain their current values.
This is different from setting the value to blanks, as in Set X " ". With this setting,
tags on modified lines are actually cleared.
List. The List option tells whether the comment tag should be shown during normal
editing and listing of lines. The default value is ON, but you can disable listing with
S X List OFF. Even though the comment tag is not listed, it is still part of the line
and is retained when you Text or Keep the file.
When you edit a COBOLX file in Visual, Qedit sets the right margin in column 72
(instead of column 80). In this way, you can see the comment field (columns 73
through 80) but it won't shift left when you delete characters.
Line Overflow
Tagging can be disabled by specifying an empty string.
Set X Null
Set X ""
While disabled, the text and tag areas are treated as one. As such, edit commands,
such as Change, are applied to the complete line.
Also, if a tag is specified and the List option is On, tag values are treated as part of
the text.
If a line has a tag value and an edit operation, such as Change or Modify, causes the
line to expand, Qedit reports an overflow error. To avoid this, you can Set X to Null,
but you would have to remember the previous setting. A better solution is to turn the
List option Off temporarily. The X value is preserved, but the tag area cannot be
edited.
Margins. For those users who still must enter and edit the tag field manually, Set X
Tab On puts Qedit's Visual right margin at column 80 instead of column 72. This
makes it much easier to edit those columns because you can tab to them.
Local Tag. Users can define a tag that is specific to the workfile currently opened.
The local tag value is stored in the Qedit control blocks. Thus, the local tag is
preserved when you Shut the workfile. You can also control the tag display for a
specific workfile with the List option.
To enable the local tag option, simply enter
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 253
/Set X Local On
From that point, any changes to the tag are recorded in the workfile. The statement
above sets the local tag to a null value. You can specify the new value on a similar
statement so that it can be used immediately. Because a local tag is workfile-specific,
if you switch to a different workfile, the local tag option is automatically disabled
and Qedit starts to use the default tag again.
If you want to stop using the local tag, enter Set X Local Off. This clears the local
tag value and Qedit starts using the default tag. Enabling the local option again does
not return the tag to its previous value.
If you are strictly using the Text and Keep commands to edit your source files, the
information is lost as soon as the workfile is purged or cleared.
Global. By default, users can define their own local COBOL tag. If this is
undesirable, system managers can enforce the use of a single tag for all COBOL files
by using
/Set X Global On
Once enabled, users are not allowed to use the Local option of the Set X command.
They can still use the Set X command, but only the global tag value can be changed.
To allow the use of local COBOL tags again, simply enter
/Set X Global Off
The global tag has priority over any local tag. If you are accessing a workfile with a
local tag and you disable the Global option, Qedit resumes using the saved local tag.
/Set X "localtag" Local On
/Verify X
Set X "localtag" Local On Default "ME990204" List ON Tab OFF
/Set X Global On
/Verify X
Set X "ME990204" Global On List ON Tab OFF
/Set X Global Off
/Verify X
Set X "localtag" Local On Default "ME990204" List ON Tab OFF
When the local option is enabled, the first tag shown on the Verify output is the local
value. It is followed by the words Local On. The global tag is displayed after the
keyword Default.
Null. If you want to reset all COBOL tags currently in use (global and local), use the
Set X Null command.
Change Confirmation. The justified option, "SetJ", displays the current X values
including the active tag, the default tag and the local tag settings. It applies the
changed settings entered on the command and, lastly, it displays the revised settings.
When none of the Cobx tags are set, the output is:
Set X values before this command:
Active tag value=, List ON
Default tag value=, List ON
Local tag value. NONE List NOT SAVED
Set X values AFTER the command:
Active tag value=, List ON
Default tag value=, List ON
Local tag value. NONE List NOT SAVED
The first 4 lines show the current settings. The last 4 show the settings after the
requested change has been applied. When there is no tag value, Qedit displays an
254 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
empty string or the word "NONE". When the List option displays as "NOT
SAVED", it means the Local feature is enabled but the List setting has not been
explicitly set yet.
If the tag values are set, the result strings are displayed as in:
/set x local off
/set x "GB" yymmdd
/set x local on
/setj x "LC" yymmdd
Set X values before this command:
Active tag value=, List ON
Default tag value=GB011213, List ON
Local tag value. prefix=
suffix=
dateform=0 List
NOT SAVED
Warning: Local ON: only updates tag for this workfile, not defaults.
Set X values AFTER the command:
Active tag value=LC011213, List ON
Default tag value=GB011213, List ON
Local tag value. prefix=LC
suffix=
dateform=2 List NOT SAVED
In this example, the first Set command turns Local X off. The second Set command
changes the default tag to the prefix "GB" followed by the current date in yearmonth-day format. The third Set command turns Local X back on and, finally, the
SetJ command sets the local tag to the prefix "LC" followed by the date in the same
format. Looking at the SetJ output, there is the then-current default tag, "GB011213",
with List enabled. There was no local tag and List was not set at that point.
The new local tag is applied and produces a warning. After the change, The active
tag is the local one and List is enabled (default value). The default tag is unchanged.
The last line provides details on how the local tag was constructed. The List option
still shows as NOT SAVED because it has not been changed explicitly after Local X
was turned on.
Verify. The Verify command displays detailed information about the local and
default settings.
/verify x
Set X Tab OFF "ME011214" List ON
/set x local on
/verify x
Set X Tab OFF Local On "LC011214" List ON Default: "ME011214" List ON
YNone
Set YNone [ ON | OFF ]
(Default: ON)
(Initially: OFF )
Whenever Qedit asks for a Yes or No confirmation, you have to enter at least one
letter (Y or N) followed by a carriage return. If you want Qedit to read just a single
character (i.e., no need for a carriage return), simply enable YNone.
Zip
Set Zip characters
(Initially: []@{} )
The Set Zip command changes the special abbreviation keys provided in Qedit. The
Zip list of characters is positional and without quotes:
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 255
1st character
FIRST
[ is the default
2nd character
LAST
] is the default
3rd character
ALL
@ is the default
4th character
Left
{ is the default (see Add)
5th character
Right
} is the default (see Add)
6th character
auto-mod
OFF by default (inactive)
Therefore, the default Zip list is: []@{}. The only way to reset ZIP to its default
value is to re-enter these codes in a Set Zip command.
Auto-Modify in Add. The "auto-modify" character (the 6th one) is disabled by
default. If you do Set Zip []@{}_ to specify "_" as the "auto-mod" character,
whenever you end a command line, or a new text line in Add, with an underline,
Qedit puts you into Modify on that line.
For example, Set Zip [%:~+? specifies [ for FIRST, % for LAST, : for ALL, ~ for
shift-left, + for shift-right, and ? for auto-modify. You may specify any special
characters you like for these functions, but each must be unique and must not conflict
with the other characters configured in Qedit (e.g., TAB, $).
256 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Shut Command [SH]
Closes the current workfile. May also rename it.
SHUT [ filename ]
(Default: close with same name)
With no filename parameter, Qedit merely stops editing the current file. Although
Qedit will close the current workfile for you when you Open another one, you may
sometimes want to Shut explicitly. One thing that Shut does is guarantee that all of
your changes are actually posted to the disc and will not be lost if the system fails or
you disconnect yourself by attempting to make a phone call on your modem phone.
To post your changes to the disc without closing the workfile, use the :Continue
command or any colon-command.
You may want to leave your terminal for lunch, in which case it is a good idea to
Shut your current file. You can always use Open * to reopen it when you return.
/shut
/open *
{you may shorten Shut to SH}
{reopen same file later}
If you specify a filename parameter, Qedit renames the workfile to the new name
before closing it. If the workfile is currently a temporary file, the rename option also
saves it as a permanent file. This command can be very helpful when you want to
save the contents of Qeditscr as a permanent Qedit file.
If the filename already exists, Shut asks if you wish to purge the old file. If you
specify * as filename, Shut uses the name of the last file Texted. Even though you
have renamed Qeditscr, Qedit will create a new one when it next needs it. You can
automatically purge any existing file by doing Shut filename,YES. Or you can
automatically abort the Shut command in that case by doing Shut filename,No.
To save the current scratch file in the temporary file domain, add ,TEMP to the
filename parameter: Shut filename,Temp.
Examples
/open crept45.dev
/modify 5/ ...
/shut
{open source file to edit}
{make some changes...}
{close workfile}
/t quser.doc
{make temporary copy of file}
QEDITSCR
...
{make changes to a copy of Quser.doc}
/list lp all
{list scratch file to printer}
/shut *
{save Qeditscr back as Quser.doc}
QUSER.DOC.ROBELLE,OLD Qedit File, # of lines=451
Purge existing file [no]? yes
/open
/shut
/text
/shut
/text
/shut
Qedit 5.9 for HP e3000 User Manual
crept45.dev
crept45.src
file1
file1x,temp
file1
file1y,yes
{open development version}
{move to production group}
{save as temporary file}
{purge existing file}
Qedit Commands • 257
Spell Command [SP]
Checks the spelling of the words in the rangelist. This command will only work if
you have the dictionary of the Spell (Bonus) program installed on your system.
SPELL [ rangelist ]
(Default: rangelist = *)
Qedit prints the lines that contain misspellings and highlights the words that are
misspelled. Use Spellj to modify each line that contains a misspelling, with the style
of line modify defined by Set Modify.
Examples
/spell
/spell @
/spell 10/20
/spell "xxx"
{check
{check
{check
{check
current line}
current file}
lines 10/20}
lines with "xxx"}
/spell ".inx"(1/4)
{check lines with ".inx"}
{in the first 4 columns}
/spellj 1/10
{check and modify lines 1/10}
User Dictionary
If you have some words that you frequently use that are not in the main dictionaries,
you can put them into a local user dictionary. You can have up to 2500 words in this
dictionary. Just create a file called SPUSER in your logon group. This file can be a
Qedit file or a Keep file. Add your words, one word per line. The words do not have
to be sorted, although a sorted list may be easier to manage.
Spell reads in the words from the SPUSER user dictionary the first time you use the
Spell command, then no longer refers to SPUSER. If you then add or delete words
from the SPUSER dictionary, you must tell Spell to re-read the words the next time
it spell-checks a word:
/set spell stop
Main and Auxiliary Dictionaries
The spelling checker's dictionaries must be installed before this command can work.
If you get a message saying "file system error opening main dictionary" (or aux
dictionary), it means that the main or auxiliary dictionaries have not been installed
correctly, or are not accessible. The two Spell dictionary files are:
Main.Spdata.Robelle
{must be present}
Aux.Spdata.Robelle
{optional}
See the chapter "Installing Qedit" for detailed instructions about installing the
dictionaries.
Notes
See Set Spell for information on configuring Spell. Use the Words command to
check the spelling of a specific word.
If your UDC or command file for running the spell checker program is also called
"Spell", you have either to change the name of the UDC, or to use :Spell to access it.
258 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/:spell file
{we suggest Spellf instead}
Currently, the spell checker can only verify the first 1,000 characters of a line. It
does not break the line on a word boundary. If character 1,000 is the middle of a
word, Spell checks only the first few characters and likely return a spelling error.
If Spell has to truncate a line, it displays a warning:
/spell
Warning: Only first 1000 of 7993 characters will be
spell-checked.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 259
:Stream Command [STREAM]
Streams a Qedit file or Keep file containing a batch job. :Stream enters a file of MPE
commands into the batch processing queue.
:STREAM [ filename ] [ ,promptchar ] [ ;AT=time...]
(Defaults: filename = $stdin,
promptchar = !.)
Examples
/stream
/l all
1
2
3
4
/stream
#J123
job23
{job23 is a qedit or keep file}
{check job stream}
!job mgr.robelle/password
!file infile=qedit.doc
!run prose.qlib.robelle
!eoj
*
{stream the current workfile}
/stream backup;at=02:00 {backup at 2 in the morning}
/list comp.streams{check contents of job stream}
/stream $
{...then stream it}
:Stream Resets Dirty Flag
When you text a file, Qedit copies the contents of the file into a workfile, and marks
the workfile as "clean." Once you make changes to the workfile, it is considered
"dirty." To see if your workfile is clean or dirty, do Verify Open.
The dirty flag is reset to clean if you Keep the file, or stream the current workfile
with stream *. This is so that you can stream jobs from templates, inserting
passwords, etc., without having to answer YES to clear the workfile on the next Text
command. If you don't want Qedit to reset the dirty flag when streaming the current
workfile (so that Qedit won't let you Text over your workfile or exit without
reminding you to save your changes), you should shut the workfile and then stream
it. This is handy when you want to make changes to a job, test it, and keep the file
once you are satisfied with the changes:
/t fulldump.job
/c "xyz"abc" @
/sh;stream *
260 • Qedit Commands
{make some changes to the job}
Qedit 5.9 for HP e3000 User Manual
:Tdpfinal and :Tdpdraft Commands
Because a number of our users have TDP for driving the 2680 printer but desire to
do their editing in Qedit, we allow you to invoke the TDP formatter from within
Qedit on either Editor files or Qedit files:
:TDPDRAFT [FROM filename] [TO filename] [COPIES nn] ...
:TDPFINAL
:TDPDRAFTQ
:TDPFINALQ
(Defaults: current workfile)
Use Tdpdraft to print a "draft" of your document. Use Tdpfinal to print a "final"
version of your document. Use the TdpdraftQ or TdpfinalQ options to suppress
TDP's final page of statistics.
The filename may be * for the current or previous workfile, but \IN is not supported
yet for Qedit workfiles. The default input file is your current workfile, if you do not
specify any parameters to the command. If you include TO, then FROM does not
default to the current workfile. Instead, TDP will prompt you for the input file. If
TDP must prompt you, then the input file you specify cannot be a Qedit workfile.
Qedit does not know about TDP's configured printers, so you cannot use
':tdpfinal from * to *quality', for example. Instead, you must set up a
file command to point TDP's formal file designator, which may be STERM or SLP,
to the appropriate device, then do `:tdpfinal from * to *device'. You
must specify a valid TDP output device, not a TDPCONFG mnemonic name. There
is no interface to the TDP spooler.
Example
/file slp;dev=pp
/tdpfinal from * to *hp2680
/reset slp
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 261
Text Command [T]
Copies a file into Qedit, retaining line numbers, file attributes, and optionally, user
labels. Also works on spool files and Copylib members. Use Text to convert a file
into Qedit format or to make a copy of an existing file. After a Text, the new copy is
"open" and ready to edit or browse.
TEXT
filename [,type] [,clearoption]
filename [,SAVETABS] [,clearoption]
filename [,BROWSE] [,clearoption]
filename [,NEW] [,clearoption]
filename [,SETINCR] [,clearoption]
filename [,LABELS] [,clearoption]
workfile [,workformat] [ (size) ] = filename [,type]
(Q=unnumbered)
(J=extra scr file, same as ,NEW)
(Defaults: size = 50% bigger)
If you do not specify a workfile, Qedit checks to see if you have a workfile Open and
it is empty. If it is, Qedit will Text filename into it. If not, Text uses the primary
scratch file named Qeditscr in your logon group. If you do Text xx,New or TextJ,
Qedit creates an extra scratch file to receive the copied file. You can have up to eight
extra scratch files (as well as the primary scratch file) and switch among them with
Open ?.
Use filename,type to override the attributes that Qedit assigns to your file. Use
workfile,workformat to override the attributes assigned to the workfile. See below for
details.
The Text command works on any file that you can read, but it truncates records
longer than 8,172 columns and prints a warning. You can use Qedit to edit program
files.
The Text filename,Browse command copies a file into Qedit, but it won't let you
modify the file. You can use the List command, including List-Jumping, Hold,
Visual mode HH and ZZ, and any other Qedit functions that do not modify the file.
There are two advantages to Browse mode: it protects you from making unplanned
changes to a file, and it does not update the Mod-Date of the file.
An asterisk (*) as filename means the workfile most recently shut. Text * is useful
when you want to expand a workfile that is full; use Shut * to rename the new
workfile to the old name.
If you do specify a workfile name, Qedit shuts your current workfile and creates a
new workfile to hold a copy of filename.
If you try to Keep the file with its original name i.e. you enter a Keep without a
filename, you will get an error.
/Text txtfile,browse
/K
File opened with Browse, please specify a Keep file name
You can still force a Keep by specifying an explicit filename as in:
262 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/Text txtfile,browse
/Keep txtfile
TXTFILE.DATA.ACCT,OLD 80B FA # of records=16
Purge existing file [no]? y
The size will be 50% larger, unless you specify an explicit size for the number of
lines for the file to hold (from 200 to a maximum of 99,999,999).
Use the clearoption to explicitly specify what Qedit should do when the modified
content of the workfile is about to be overwritten. Enter Yes to confirm it is OK to
clear the workfile. Enter No to prevent the overwrite. See "Clearing the Workfile"
below.
See Set Work for details on calculating nominal size versus real size, as well as
options that control treatment of user labels, Qeditscr and non-empty workfiles.
Examples
Copy in a sample job, modify, and :stream:
/text jobfile
/mod "XXX"
/:stream *
{copy Jobfile into Qeditscr}
{make changes to template job}
{launch job into MPE batch queue}
Make copy of source file, start new version:
/text hwsy.src
/shut hwsy.bob
/open *
{copy Hwsy.Src into Qeditscr}
{save as permanent file}
{open Hwsy.Bob and edit it}
Copy a source file without using a scratch file:
/text audit.bob = audit.source
Use Text and Keep to revise a schema file:
/text schema
{copy Schema into Qeditscr}
/mod 5/10
{make some changes}
/keep
{update master copy of schema}
SCHEMA.BOB.GREEN,OLD 80B FA # of records=86
Purge existing file [no]? yes
Text two files and copy lines between them:
/text One
/text Two,New
/hold 10/20
/open *
/add 100=hold
/keep
{copy One into primary scratch}
{copy Two into extra scratch}
{or use HH in Visual mode}
{switch back to file One}
{or use AH in Visual mode}
{save changes to One}
Text a data file with its user labels:
/text quizsub.data,labels
Expand a Qedit workfile when it is full:
/shut
/text filename
/shut filename
/open *
Absolute File Name
When you Text a file, Qedit remembers the absolute path name of the file, not the
relative name. This becomes the default for the Keep command. If you Keep with an
explicit name, Qedit remembers the absolute path of that name. If you do Set Keep
Name xxx to override the default Keep name, Qedit remembers xxx as a relative
name, not as an absolute name. This gives you all the options you need to take
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 263
advantage of the POSIX namespace and Change Directory (Chdir) command in
MPE/iX 5.0.
Native-Mode Spool Files
Qedit can Text output spool files on MPE/iX, but does not Keep them (use List LP
instead).
/showout
/text #o1234
/text #9876
COBOL Copylib Members
To edit a Copylib member with Qedit, you Text it in like an ordinary file and Keep it
with your changes. The member name goes in parentheses and the name of the
Copylib file goes after that (the file name may be omitted if you have a :File
command for "copylib").
/file copylib=copylib.pub.develop
/text (custrec)
/text (custrec) copylib.test.develop
How to Text Several Files?
Qedit has a primary scratch file that is referred to as "Qeditscr". Any time you take
the default options for Opening or Texting a file, your work will be in the Qeditscr
primary scratch file.
What if you want to edit two or more files and copy lines between them? You could
Text the first file, Hold the desired lines, Keep your changes, then Text the second
file and insert the lines. However, if you are doing a large number of edits, the
constant Text and Keep operations are inconvenient.
A faster method is to Text each file into an extra scratch file of its own. Then use
the Open ? or Open *-n command to switch quickly among them. By default Text
always copies the file into the primary Qeditscr scratch file. However, Qedit can
supply up to eight extra scratch files. Use the New option (text abcdef,new) or do
Text-J (textj abcdef).
The New command can also create extra scratch files. Warning: If you do New;Text
file,New you will create two Extra Scratch Files, not one.
Saving Your Work
When you Exit, Qedit checks whether you have any unsaved edits in any of your
Extra scratch files. If so, you are prompted to Discard? them, or stay in Qedit to save
them. Qedit also asks you to Discard your changes if you Close a scratch file, which
removes it from the Open-Stack and purges the file.
Clearing the Workfile
Sometimes Qedit will ask you if it is okay to clear the existing contents of the scratch
file and sometimes it won't. If you have not made any changes to the scratch file
since you last did a Text or Keep, or :Stream *, Qedit assumes that you have another
copy of the lines and it is okay to delete the copy in the scratch file.
In batch, the answer to the "Clear?" question will always be "yes". If you know the
answer you want, you can append it to the file name parameter just as you do in the
Keep command:
/text abc,yes
/text def,no
Using Set Keep for File Attributes
264 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
When you Text a file, Qedit remembers as many attributes of the file as possible.
When you later Keep the file, Qedit attempts to reproduce the original file. The Text
command does an implicit Set Keep command to record what it has discovered about
the Text file. You can use Verify Keep to see whether the Text file had sequence
numbers, was permanent or temporary, etc., and then use Set Keep to override any of
those attributes.
Using TextQ for Numeric Data Files
TextQ means "text quiet" or "text unnumbered" and is the same as using ,UNN after
the filename. Use TextQ to edit any data file that may contain numeric digits in the
last eight columns. Otherwise, Qedit may interpret those digits as sequence numbers,
if the first five records of the file contain data that looks like ascending sequence
numbers.
Treatment of Sequence Numbers
Qedit retains whatever sequence numbers it finds in the external file. If Qedit finds
an invalid number, it begins assigning new numbers starting from the last valid
number and adding Increment.
If the file does not have sequence numbers, Qedit assigns new ones, starting at 1.0
and going up by a calculated increment. The calculated increment is based on the
file's current characteristics such as the number of records.
This works well in the majority of cases. However, there are cases where the
calculated increment is not accurate enough or the user wishes to have a specific
increment. This can be done by setting the increment with the Set Increment
command. Then, use the Setincr option on the Text command.
/Text bigfile
/Set Increment .02
/Text bigfile,Setincr
{Use calculated increment}
{Set the increment value}
{Override the calculated increment}
Files with User Labels
By default, Text discards the user labels of the external file. However, if you specify
Text file,Labels, Qedit attempts to copy user labels into your workfile, so that it can
write them out again when you do a Keep. This is handy if you are editing a Cognos
sub-file. If you do Text file2=file1,Labels, Qedit can make room for up to 252 user
labels. If you Text into an existing workfile, there may not be enough room in it for
all of the user labels.
To make Text,Labels the default, use Set Work Labels ON.
Files with Header Records
Text has an option to skip 1 to 9 records before deciding the "language" of the
external file. The format is as follows:
TEXT lines/filename
where lines is the number of lines to skip over.
This is useful with source files from external sources, such as IBM machines, that
may have control cards without sequence numbers, followed by a numbered COBOL
source program. By skipping the control cards, Qedit may recognize the file as a
COBOL program, instead of a Job file.
Tab Character
By default, Qedit retains tab characters in a file when it Texts the file. However,
another option is to expand the tab characters into spaces (to the next tab as
established by Set Tabs Stop). You can expand tabs on a specific file by using the
Expandtabs option on the Text (or List or Add-File) command. To force all file
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 265
accesses to expand tabs, do Set Expandtabs On (the default is Off). With Set
Expandtabs On, use the Savetabs option to access a file without expanding tabs into
spaces:
/text srcfile,expandtabs
/set expandtabs on
/text dbfile,savetabs {override Set Expandtabs On}
If you are editing files with tab characters, see Set Vis Tab.
Overriding Qedit's File Type
Sometimes Qedit will interpret the format of the external file incorrectly. For
example, if you have COBOL source code from an IBM system, it will probably not
have a 1052 file code. Thus, Qedit will treat it as a JOB file. You can override the
file type that Qedit would assign by appending a file type keyword to the file name:
filename,COBOL
filename,FTN
or FORTRAN
filename,SPL
filename,PASCAL
filename,JOB
filename,RPG
filename,TEXT
filename,COBFREE
filename,DATA
forces Jumbo workfile
filename,UNNUMBERED
filename,HTML
filename,XML
filename,QSL
filename,JAVA
The keyword may be shortened to any leading substring, but the comma is required.
You cannot use this option to force Qedit to warp a file into something that it is not.
You can only use it to resolve ambiguities (i.e., between FORTRAN, Pascal, and
SPL, which look the same).
/text funny
Language is now JOB
678 lines in file
/text funny,cobol
Language is now COBX
678 lines in file
{this should be a COBOL file}
{but it has a file code of 0}
Overriding the Workfile Format
You can override the workfile format that Qedit would use by appending a workfile
format keyword to the workfile name:
workfile,DATA {forces Jumbo workfile}
workfile,WIDE {forces Wide-Jumbo workfile}
The keyword may be shortened to any leading substring, but the comma is required.
If you don't specify a keyword, Qedit will use the format that is most appropriate for
the file you are texting in. If the lines have 256 characters or less, Qedit creates a
regular workfile. If the lines are between 257 and 1,000 characters, Qedit creates a
266 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Jumbo workfile. If the lines are wider than 1,000 characters, Qedit creates a WideJumbo workfile.
You can force Qedit to use a wider format by using the Data or Wide keywords to
override Qedit's choice. If you want the Jumbo format, use the Data option. If you
want the Wide-Jumbo format, use the Wide option.
You cannot force Qedit to use a smaller workfile format.
Let's assume that we have a file called Funny, which has 80-character lines.
/text funny
{this would create a regular workfile}
Language is now JOB
678 lines in file
/v open
Open: QED35753.SRC.DEVACCT,Scratch JOB Length:80 Margins:1/80
/text wrkdata,DATA=funny {this creates a Jumbo workfile}
Language is now JOB
678 lines in file
/v open
Open: WRKDATA.SRC.DEVACCT JOB Jumbo Length:80 Margins:1/80
/text wrkwide,WIDE=funny {this creates a Wide-Jumbo workfile}
Language is now JOB
678 lines in file
/v open
Open: WRKWIDE.SRC.DEVACCT JOB W-jumbo Length:80 Margins:1/80
These examples require that you name the workfiles and make them permanent. If
you want to have a scratchfile while making it a Jumbo workfile, you should
/Set Lang Data
/Set Length 1000
/AQ 1=funny
If you want to make a Wide-Jumbo scratch file, set the Length to a value larger than
1,000. Note that the Language remains Data.
CCTL Disc Files
When you text in a disc file that was created with the CCTL attribute, the first
column of each line contains a "carriage control" code. For example, "1" means page
eject and "+" means overprint. There are two codes for single space: " " (i.e., blank)
and binary zero (i.e., the null character). Unfortunately, binary zero is nonprinting, so
when you List a line the rest of the columns are shifted over one space. Also, if you
use Visual to edit such a file, the Binary Zero in column one is printed as a dot and
you cannot edit the line. To avoid these problems, Qedit replaces the Binary Zero in
column one with a Space character, which means the same thing.
File Modification Timestamp
When you use the Text command on a file, Qedit stores the file's modification
timestamp in the workfile. You can display the timestamp by using the Verify
command. Qedit uses the stored timestamp to perform some verification if you try to
either Keep the file or Shut and re-open the workfile.
$File Keyword
File names containing special characters might cause problems to Qedit. For
example,
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 267
/Text ./file:name
Error: Extra or invalid character in Text command
If you run into this problem, you can use the $file keyword instead. The $file
keyword can be used wherever a file name is expected, such as in Text, Add, List.
The syntax is:
$file[=]"filename"
$File is a reserved keyword, which is followed by an optional equal sign and the
actual file name enclosed in string delimiters. Without doing anything to the string,
Qedit tries to open the specified file. The previous example now becomes:
/Text $file="./file:name"
10 lines in file
In this example, the file name is assumed to be in the POSIX namespace. If you want
to access files in the MPE namespace, you now have to enter the name in uppercase
and use the POSIX notation:
/ACCOUNT/GROUP/FILENAME
268 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Undo Command [UN]
Reverses the effect of the previous command that modified text, after showing you
the command and asking your permission.
UNDO [ ALL | REDO ]
(Default: the last editing task)
Undo prints the command to be undone and how many lines it actually updated,
added, deleted, and/or renumbered. The commands can only be undone in reverse
order, one at a time, and no commands can be skipped. Therefore, you don't have to
specify which command to Undo; you are always presented with the next one, then
asked if you want to actually undo it.
If you want to see the commands in the Undo Stack, use the Listundo command.
After an Undo, another Undo will cancel the command that was one further back. In
this way, you can Undo back to the time the file was first Texted or Opened. If you
Undo one step too far, you can cancel your preceding Undo task using the Undo
Redo command. This option is accepted until there are no more Undo tasks to be
cancelled. Once you enter a non-Undo edit command, you have approved your Undo
tasks and they can no longer be cancelled.
Or, you can use Undo All to undo all the updates since the last Text or Open. If you
don't like the results after an Undo All, you can put the file back in the edited state by
doing another Undo (i.e., you can Undo the Undo All).
Examples
/cq "Bob"Robret" all {mistake in Change}
23 lines changed
/undo
{reverse Change command}
Command to Undo: CQ "Bob"Robret" all
( Update:8 )
{shows actual update counts}
Undoing Changes in Visual Mode
You can use the Undo command to cancel changes in Visual mode as well as in Line
mode. All of the changes you make on the screen before pressing Enter are treated
by Qedit as one "undo-able" command, except for cut-and-paste operations. Qedit
always executes your cut-and-paste operation last after updating the file with any
other changes, no matter what order the changes were made in. This means that you
can choose to undo just the cut-and-paste operation, or undo it and all of the other
changes. You can continue undoing your previous changes from each Enter, one at a
time, until your file is back to its original state.
Notes
An Undo cannot be undone, except by Undo All.
The Undo change log is reset by a Text command (but not a Keep), by a Delete All,
or by making changes to another file. The Undo log is temporary and is not retained
if you exit Qedit or log off the system. You cannot go back and undo changes that
you made to a file after you leave Qedit.
You can Undo any text-altering commands since the last Text or Open command,
except for Delete All. Delete All can be canceled before the next command line is
executed using Control-Y. You can shut and then reopen a file and undo changes as
long as you don't make any changes in any other files.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 269
In the unlikely event that the undo log file (i.e., "undolog") overflows, Qedit will
print a warning message and disable the Undo feature. Undo is disabled in batch by
default, and active in session usage. Using the Set Undo command you may override
this default or disable Undo for a particularly large edit, to save overhead.
/set undo on
/set undo off
270 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Up Command [UP/F2]
Starts "browsing" the current file by displaying one page, starting about six lines
forward. You stay in "browse" mode until you enter any command (see List, jumping
option).
UP
(F2 key does the same)
In Line mode, Up (or F2) puts you into List-Jumping's browse-mode. The starting
location is a few lines ahead of the current position, where the actual number of lines
is determined by the Set Visual Roll amount. Qedit displays a screen of text, where
the screen size is either 23 lines or what you specify with Set List LJ, then waits for
you by asking "More?". Press Return to see the next screen, typing a line number
moves you to the screen starting at that line, pressing F2-F6 does the appropriate
action, and F8 or "//" or Control-Y or typing any command gets you out of browsemode. At the "More" prompt, the * "current" line is the last line displayed.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 271
Use Command [U]
Executes part or all of the commands in a file.
USE filename [ rangelist ]
(Q=no display, J=no open error)
(Default: * means current or last workfile, range=all)
Qedit opens filename and reads command lines from it, instead of from Stdin. "*" as
the filename either closes the current workfile and Uses it, or Uses the workfile most
recently closed, including a scratch file. Execution continues until the last line of the
usefile or until you strike Control-Y.
Qedit prints the commands on Stdlist, unless you do UQ. To print instructions to the
user even when UQ is in effect, put Q commands in your usefile. :Comment
commands will document the usefile; the comment is not printed with UQ.
Examples
/use fixspell
ch "reveiw"review" @
ch "corelate"correlate" @
/use $ 30/
{execute a list of Changes}
{commands are printed}
/use *
/use fixit 2/5
/use compile "extfile"
{* = last Open workfile}
{do lines 2/5 only}
{do lines with string}
{rangelist, last file}
{See the Q command for a sample usefile that compiles}
Notes
The Use command temporarily redirects Qedit's command input device, reading
commands from a file. The same features and restrictions apply to the commands in
a usefile as would apply to commands typed on the terminal. For example, a
command cannot be continued from one line to the next, usefiles do not accept
parameters, etc. For these types of features, see User Commands (UDCs and
command files).
The usefile can be of any file type allowed in Text or Add. Although Qedit allows
nested usefiles, you cannot have nested loops. Usefiles support :If and :Else for
conditional logic, but not :While. For looping and parameter power, use command
files.
If the usefile does not exist, UJ suppresses the error message that would be printed,
allowing optional Use commands in Qeditmgr files.
272 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Verify Command [V]
Prints the status of Qedit, the current workfile, and Set options.
VERIFY
[ @ | ALL ]
[ LP ]
[ keyword ...]
(Default: show nonstandard options)
The default is to show the options which are not in their default state. Verify All
shows every Set option in the exact form that Qedit accepts (the shortest form is
shown in uppercase).
The keywords may be any Set option, or Alias, Exit, Proc, Prog, Run, String,
Lastfile, Visual, Version, Z for Zave, or ZZ for the marked range.
Examples
/verify
/ver open
/ver visual
/v @
/verify lp
/verify version
/verify string
/verify lastfile
/v $
/verify prog
/verify run
/verify proc
/verify exit
/verify zz
Qedit 5.9 for HP e3000 User Manual
{show nondefault values}
{describe the Open workfile}
{Visual mode status and options}
{print full status on Stdlist}
{print full status on LP}
{Qedit version number}
{current "string" for F3/F4}
{previous file for List $}
{abbreviation for previous file}
{Qedit program file, parm=, info=}
{suspended programs, if any}
{active Procedures}
{does Qedit suspend on Exit?}
{currently marked range}
Qedit Commands • 273
Visual Command [VI/F1]
Switches to full-screen editing at the current line, at a specified line, or at the next
occurrence of a specified string.
VISUAL [ linenum | "string" ]
(Default: linenum = *)
Qedit allows you to edit text in "full-screen" mode on most HP terminals that have
block-mode, and on PCs equipped with terminal emulators such as Reflection and
AdvanceLink. You use the terminal's special keys to edit the screen, instead of using
Qedit commands. When the image on the screen suits you, press Enter and Qedit
reads the screen and records the changes in your file. For full details, see the
"Getting a Quick Start with Full-Screen Editing" chapter.
Examples
/visual
/vis 45
{start full-screen editing now}
{start full-screen editing at line 45}
/vi "go"
{find "go" then change to full-screen}
Notes
For a help screen that summarizes most of Visual mode, type a "?" in the top screen
line (at the ===>) and press the F7 key.
If you are a novice, use Set Vis Update ON. Qedit now automatically reads your
updated screen when you browse or use a function key.
Other tips: Do not add more than 60 lines before pressing Enter. If you have trouble
at 9600 baud try turning your terminal down to 2400 baud. Avoid the Clear Display
key; if you press it by mistake, type "*" in the top screen line and press F7 (this will
refresh the screen). To save and restore your function keys, use Set Vis Save ON. To
get out of Visual, use the F8 function key.
Right Margin and Display Width
Full-screen mode can take advantage of most features available on the terminal or
emulator it's running on. A couple of these features are the ability to adjust the
display width and the right margin based on the file's record length. Unfortunately,
these features are not implemented equally well on all devices and may cause
undesirable behavior.
For example, the hpterm emulator supports display width larger than the standard 80
columns. However, Qedit can not change the display width using the usual escape
sequences. Setting the right margin also caused problems for some users. That's why
we introduced the RCRTMODEL 1234. This tells Qedit that the terminal can be
polled to determine the current display width and has basic block-mode capabilities.
At the same time, we introduced Set Visual Marginfixed. When RCRTMODEL is
set to 1234, Marginfixed is automatically enabled. In this case, Qedit does not try to
change the display width nor does it change the right margin. It assumes both are set
by the user and have the same value. If needed, a user can manually enable
Marginfixed on a terminal or emulator other than hpterm.
274 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:While and :Endwhile Commands
In command files and UDCs, you may use :While and :Endwhile commands to
create program loops. See also the :If command, the /Qedit command and the
INSIDEQEDIT JCW. The :While command can be nested, just like the :If command,
but may not be continued with &. :While and :Endwhile cannot be used at the /prompt or in usefiles. When used in a UDC or a command file, :While and :Endwhile
can not be prefixed with a slash "/".
:WHILE expression DO
:ENDWHILE
Examples
This example lists the line containing a search string, plus the next the three lines. To
try the example, enter the following commands into Qedit and Keep them as
LOOPER.
PARM string
/set window (up)
setjcw cierror = 0
continue
/findq "!string" first
while cierror=0 do
display FOUND "!string":
/list */*+3
display
continue
/findq "!string"
endwhile
You invoke the command file by typing the file name and the parameter:
/open myfile
/looper alberta
/shut
Do I Really Need to Use the :While Command?
You may not need to use the :While command. Most Qedit commands accept a
rangelist, which makes it easy to include a search string in the command itself. For
example, to change "oldpass" to "newpass" in all lines that contain "!job " in the first
five columns, you would
/change "oldpass"newpass"
Qedit 5.9 for HP e3000 User Manual
"!job " (1/5)
Qedit Commands • 275
Words Command [W]
Looks up each word in the spelling dictionaries. This command will only work if you
have the dictionary of the Spell (Bonus) program installed on your system.
WORDS "string of words"
The Words command can check the spelling of words, or search the dictionary for
similar words. Words in the string must be separated by blanks.
Check spelling
When Words checks the spelling, it will tell you whether the words in the string are
correctly spelled (found), incorrectly spelled (not found), or incorrectly cased (wrong
case).
Example
/words "right wroung david"
found
: right
not found : wroung
wrong case: david
Searching for Words
Words can search for similar words in one of two ways. The first, called prefix
search, searches for words that begin with the same letters as the given word. The
second, called soundex search, searches for words that sound like the given word. To
specify a prefix search, add an at-sign (@) after the search word; to specify a
soundex search, add an exclamation mark (!) after the search word.
Examples
/words "quicks@"
{find words prefixed with "quicks"}
word
: quicks
prefix
: quicksand
: quicksands
: quicksilver
: quickstep
4 matches
/words "vegetable!" {find sound-alikes for "vegetable"}
word
: vegetable
soundex
: vegetable
: vestibule
: visitable
3 matches
Notes
The spelling checker's dictionaries must be installed for this command to work. See
the chapter "Installing Qedit" for instructions about installing the dictionaries, and
the notes under the Spell command for more information. Use the Spell command to
spell-check a range of lines.
276 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
:Xltrim Command [XLTRIM]
This command allows you to reduce the disc space allocated to some MPE/iX files,
especially Qedit files, which have space left for expansion (i.e., the ultimate file
Limit is greater than the current End of File). :Xltrim gives back any sectors beyond
the EOF, but leaves the Limit above the EOF for future expansion. :Xltrim does not
work on on MPE V, because MPE V does not have the special Fclose option that is
needed.
:XLTRIM fileset
(Defaults: none)
:Xltrim finds all the files in fileset which have their EOF below their Limit and have
unused disc space beyond their EOF. On current versions of MPE/iX you need
Write-Access security to the file, but on older systems you only need Read Access.
:Xltrim opens each file and then closes it with the bit 11 of the disposition set to 1;
this returns any unused disc space beyond the EOF, but does not reduce the Limit.
Therefore, the next time you use the file, MPE/iX can still expand in size as needed.
This command can save thousands of sectors of disc space. If the EOF equals the
Limit, nothing is done to file. If the Limit is greater than the EOF, there may or may
not be unused space to be recovered by :Xltrim; this depends upon how MPE/iX has
allocated disc extents to the file.
Examples
/xltrim @.source
/xltrim @.@.green
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 277
Zave Command [Z]
Saves or recalls a string of Qedit commands.
Z [ = [commands] ]
(Default: if no commands, Z= prompts)
Use Z= to save some Qedit commands for later use. Use ";" to combine multiple
Qedit commands. If Qedit does not find anything after the "=", it reads the
commands from the terminal. Qedit saves the commands and you can execute them
again at any time by typing Z. There is only one "Z" in Qedit. When you enter a new
Z string, you lose the existing one.
When you type Z with no = sign, Qedit inserts the saved commands in place of Z.
The total length of the Z string plus the remainder of the original line must be 80
characters or less.
Examples
/z=
list */last
/z
{redefine value of Z string}
{you enter new line of commands}
{use Z to mean "list */last"}
/z=l*-5/*+5
{define z as "list vicinity"}
/fq "trish";z {find string and display around it}
/z=f"`|1@"(p); a*=*; c"`".ent "
{find string that matches pattern; copy line}
{change a string in the new line}
Notes
You can display and edit the current Z string only if you entered the Z string at the
same time as the Z= command.
/z=q "hi"
/z
hi
/redo z=
/Z=q "hi"
hello"
/z
Hello
Although the line saved in Z need not be a complete command, it is recommended
that incomplete strings not be put in Z, as they may be upshifted.
"ListJ *" is a useful command string to save. Just type Z, and Qedit will start listing
from your current position. When you find what you want, press Control-Y to stop
the listing.
278 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
ZZ Command
Marks a block of lines so you can refer to them in any command.
ZZ [ line [ / line ] | OFF ]
ZZ [ [ string range ] | OFF ]
(Q=no display)
(Default: * becomes start or end of block)
ZZ line/line marks a range of lines, while ZZ line marks the start or end of a range.
ZZ marks one range only, not a rangelist. To mark a single line, say 5, use zz 5/5.
ZZ OFF cancels the currently marked range, eliminating the half-bright display
enhancement in Visual.
Examples
/zz 5/10
/change "prog"program" zz
/find "procedure open" (up)
/zz
{mark start of block}
/find "@end;~{open}@" (pattern up)
/zz
{mark end of block}
/keep savefile zz
{save block in a file}
/verify zz
{check current range}
/zz off
{cancel current range}
Notes
The marked range is remembered when you Shut and reopen the file and is adjusted
for Renum operations. Use Verify ZZ or List ZZ to check the currently marked
range. ZZ is also valid as a cut-and-paste operator in Visual mode.
Using a string range on a Find command automatically updates the ZZ marker. For
example:
/v zz
ZZ OFF
/find "start"/"end" [
Lines 5/11 saved in ZZ
/v zz
ZZ 5/11
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 279
User Defined Commands
You can execute MPE User Defined Commands, also known as UDCs, inside Qedit.
You must first do a Set Udc command to tell Qedit which UDCs to recognize. To
check on your UDCs, use Verify Udc, :Setcatalog and :Help udc.
The wider concept, User Commands, includes both UDCs and command files.
Command files are like UDCs, but do not have to be cataloged, since each file
contains a single command whose name is the file name itself. Many users are
switching from UDCs to command files, because the maintenance is easier.
Qedit accepts UDC commands with or without the leading colon (":"). You must
precede a UDC name with a colon if the name of the UDC is the same as a Qedit
command (e.g., :R, :L). Beware of some unobvious Qedit commands composed of
abbreviations and options. For example, PRT is interpreted as a Qedit command
(Proc with the template option) so you must put a colon in front of it to have Qedit
execute it as a User Command.
UDCs may contain MPE commands such as Listf, conditional logic commands such
as If-Else-Endif and While-Endwhile, Qedit-simulated MPE commands such as
:Editerror or :Display, other UDCs, command files, calculator commands (=5*80),
external commands (%purge t@), and Qedit commands (precede them by a slash, as
in /list abc). Qedit commands in command files and UDCs will set the CIERROR
JCW so that you can test the result of the command. See the /Qedit Command for
more details.
Sample UDCs
UDCs allow you to abbreviate the MPE commands that you use frequently and to
create complex new commands. We provide a sample UDC file in the Robelle
account that you may find useful:
/set udc udc.catalog.robelle
/:showcatalog
UDC.CATALOG.ROBELLE
PROSE
USER
PDISC
USER
SEG
USER
TIME
USER
SPOOK
USER
DUP
USER
/:help time
USER DEFINED COMMAND:
time
comment show the date and time
showtime
/:time
FRI, OCT 14, 2000, 9:24 PM
/:SPOOK
{runs spook on any CM system}
Restriction on Qedit UDCs
There are three restrictions on the User Commands that Qedit can handle: no more
than 32 parameters or more than 256 bytes of parameters, no expanded line greater
than 279 characters, and no I/O redirection on MPE V.
Qedit supports If/Else commands and the While-Endwhile loop of MPE/iX, but the
CIERROR JCW is not updated exactly the same as MPE for all errors.
INSIDEQEDIT JCW
280 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Since UDCs and command files are not exactly the same when executed inside
Qedit, as they are when executed by MPE, we provide a JCW that tells you where
you are. INSIDEQEDIT is set to 0 the first time you run Qedit. You should also set it
to 0 in your logon UDC. If you do a ShowJCW, INSIDEQEDIT will always show a
value of 0. When you refer to INSIDEQEDIT from within Qedit (in an If or While
command), Qedit does not look at the real JCW. Instead, it inserts a constant value of
1. Nor does Qedit set the real JCW to 1; it is still 0. Thus, you have a JCW that acts
differently within Qedit, giving you a way to find out where you are. Since /Qedit
commands can only be executed when the command file is executed by Qedit, the
INSIDEQEDIT JCW gives you a way to test this.
if insideqedit=1 then
run spook5.pub.sys;hold
else
run spook5.pub.sys
endif
Warning and Error Messages
You can control the appearance of warning and error messages via the
HPMSGFENCE variable when executing commands, UDCs and command files by
MPE. Qedit has no way to check the value of this variable when it executes the same
commands, thus HPMSGFENCE has no effect. An equivalent feature has been
implemented via a user variable called ROBMSGFENCE. It uses the same values
and meanings as HPMSGFENCE but applies only to commands executed by Qedit.
You can change its value at any time and the change takes effect immediately.
setvar robmsgfence 1
setvar robmsgfence 2
setvar robmsgfence 0
{suppress warning messages}
{suppress error and warning messages}
{default, displays warning and error messages}
Here are some examples:
/purge nofile
File "!" not found. No purge done. (CIWARN 383)
/setvar robmsgfence 1
{suppress warnings}
/purge nofile
/build nofile;temporary
Unknown keyword for BUILD command. (CIERR 299)
/setvar robmsgfence 2
{suppress errors and warnings}
/build nofile;temporary
/setvar robmsgfence 0
{display errors and warnings}
/build nofile;temporary
Unknown keyword for BUILD command. (CIERR 299)
/purge nofile
File "!" not found. No purge done. (CIWARN 383)
UDC Security
Some users have altered the security of Command.Pub.Sys to be (X,L:ANY;
R,A,W:CR). If you do this, the Set Udc On command will not be able to search
Command.Pub.Sys. Use Set Udc with file names instead.
UDCs with Parameter Substitution
Here are two UDCs with parameters, :Compare and :Seg.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 281
/set udc compudc.catalog.robelle
/:help compare
USER DEFINED COMMAND:
COMPARE filea, fileb, outfile="$STDLIST", info=""
comment
comment Compare two files using the Compare program.
comment
file filea=!filea
file fileb=!fileb
file outfile=!outfile
run compare.pub.robelle;info="!info"
reset filea
reset fileb
reset outfile
****
You invoke the Compare UDC by entering:
/:compare *,origfile
{* means current workfile}
In Qedit, an * as a parameter to a User Command substitutes the name of your
current workfile or the last one you Shut. As well, $ as a parameter substitutes the
name of the last external file name mentioned (Verify Lastfile).
The Seg UDC gives you the ability to execute a file of :Segmenter commands
without typing them interactively and without streaming a batch job.
/setcatalog udc.catalog.robelle
/:help seg
USER DEFINED COMMAND:
seg parm1
comment execute segmenter commands from a file.
run segdvr.pub.sys;stdin=!parm1
*
To invoke Seg, specify the file name that contains Segmenter commands:
/:seg seg055
Variables
On MPE/iX, commands in UDCs and command files may reference variables by
preceding them with an exclamation mark, just as you do for parameters (e.g.
display !hpgroup). Variables are also allowed in MPE commands which you
enter through $stdin or a usefile. On MPE V, Qedit allows you to refer to the value
of a JCW in the same way (e.g., display !cierror).
Current Workfile (*)
The :Prose command is even more useful than it appears, due to an extension to the
UDC-concept that Qedit provides: * as a parameter is replaced by the name of the
current workfile, or the workfile just closed if none is Open. Thus, you can easily
edit and print a Prose document from within Qedit:
282 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
/open rpt003.doc
{open file for changes}
/modify ...
{edit the document}
/set udc udc.catalog.robelle
/:prose *
{print final-stop with control-y}
{Prose may take a while}
/modify ...
{more changes...}
/add .001
{select pages to print}
0.001 .sel (1:4)
0.002 //
/:prose *,*lp
{print copy on line printer}
When you specify * as a UDC parameter and the current file is in your logon group,
Qedit passes the unqualified file name as the UDC parameter instead of the fully
qualified file name. This allows you to append group names to it in the UDC body.
Options for UDCs
Qedit supports the MPE options for List, Nohelp, and Nobreak, plus:
OPTION NOERROR
OPTION NOWARN
{suppress all MPE error messages}
{suppress all warning messages}
Option List, Nolist, Recursion and Norecursion can be used at the beginning of a
UDC as well as anywhere in the body of a UDC to enable or disable the
corresponding feature. Other options are recognized only at the beginning of the
UDC.
Option List and Nolist controls the display of individual commands that make up a
UDC. When Option List is encountered, Qedit echoes every command back to
$stdlist as they are executed. Option Nolist suppresses the display. The option can be
enabled and disabled as often as needed.
In addition to User, Account and System UDCs loaded with Set Udc On, you can
add session-level UDCs. These are loaded by the Set Udc filename command and are
valid for the duration of the current Qedit session.
You can have session header and trailer UDCs. Session header UDCs precede the
MPE-equivalent UDCs loaded with Set Udc On. Session trailer UDCs follow these
same UDCs. For example, if you use all UDC levels, you would have:
1.
Session header
2.
User
3.
Account
4.
System
5.
Session trailer
Even though the first and last levels are designated as session UDCs, Qedit treats
them as separate, unrelated levels.
Set Udc On loads all 3 levels automatically. If you wish to load files from a single
level, you have to use Set Udc filename to load individual files.
When Qedit searches UDCs, it starts from the session header level and goes down
the list. By default, a UDC can only call a UDC that is defined at a lower level. This
is non-recursive execution.
In some instances, it might be desirable or necessary to call UDC that is higher up in
the search order. To achieve this, you can insert an Option Recursion statement in
the calling UDC. From that point, Qedit starts the search at the top of the current
level. For example, if the UDC currently executing is at the Account level, the search
starts with the first account UDC. If the currently executing UDC is a Session
Trailer, the search starts with the first session trailer UDC.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 283
To disable recursion, insert an Option norecursion statement at the desired location.
Recursion can be disabled or enabled as often as needed.
Because recursion can cause infinite loops if not used properly, UDCs can be nested
only 30 levels deep or until allocated stack space is used up.
284 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Command Files
A command file is a file that contains a set of commands which will be executed
when you type the name of the file (like a DOS batch file). Command files are
similar to UDCs except that you do not need to catalog them. Like UDCs, command
files can have parameters.
Qedit accepts command file names with or without the leading colon (":"). You must
precede the command file name with a colon if the name of the command file is the
same as a Qedit command (e.g., :R, :L). Beware of some unobvious Qedit commands
composed of abbreviations and options. For example, PRT is interpreted as a Qedit
command (Proc with the template option.) If you have a command file call PRT, you
must put a colon in front of it to have Qedit execute it as a User Command.
You can use command files as a "command language" to write customized functions
in Qedit. Command files may contain MPE commands like :Listf, Qedit commands
preceded with a slash, conditional logic commands such as :If and :Else, :While
loops, Qedit-simulated MPE commands such as :Editerror, other command files,
UDCs, external commands (%purge t@), and calculator commands (=5*80). You
can include Qedit commands in a command file by preceding them with a slash "/".
Qedit commands in command files and UDCs will set the CIERROR JCW so that
you can test the result of the command. See the /Qedit Command section for more
details.
A command file can start with the optional header lines: PARM, ANYPARM and
OPTION. These define the parameters and options of the command file. The
command file terminates at the end of file or the first * line. If you need to pass an
exclamation mark as parameter, use !! (for example, use !!xx if you want to pass
in the string !xxx).
For example, here is a command file to print the spool files for a job number:
SSP.BOB.GREEN
parm jobnum="0"
if !jobnum > 0 then
showout job=#j!jobnum
endif
To invoke SSP.Bob.Green within Qedit, you just type
/ssp 67
Qedit follows the Hppath variable in searching for a command file named "ssp". The
default is to look in your logon group, then your Pub group, then Pub.Sys. You can
override the default path by doing :Setvar Hppath on MPE/iX or Set Hppath on MPE
V (simulated).
/:setvar hppath "!hpgroup,cmd,pub,pub.sys" {MPE/iX}
/set hppath "!hpgroup,cmd,pub,pub.sys"
{MPE V}
Warning: When you convert a UDC into a command file, don't forget to replace the
UDC name in the first line by the literal "PARM". If you forget, you can easily
create a recursive loop, since the PARM line is optional in command files. A
command file can invoke itself recursively, but only up to 10 levels deep.
Restriction: Command files must be permanent files on MPE V, but they can be
either temporary or permanent files on MPE/iX.
Variables in Command Files
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 285
On MPE/iX, commands in command files may refer to variables by preceding them
with an exclam, just as you do for parameters (i.e., display !hpgroup). On
MPE V, Qedit allows you to refer to the value of a JCW in the same way (i.e.,
display !cierror).
Here is a command file that updates a record with today's date in YY/MM/DD
format. The date is derived from the pre-defined HP JCWs hpyear, hpmonth, and
hpdate:
TODAY.CMD.SYS
/t file
{replace columns 1/8 with date}
/set win (1/8)
/c 1/8 "!hpyear/!hpmonth/!hpdate"
/l "/" (5/5) *
{check for "/" in column 5}
if qeditcount = 1
/c 4 "0"
{insert leading 0 before month}
endif
/l " " (8/8) *
{check for " " in column 8}
if qeditcount = 1
/c 7 "0"
{insert leading 0 before day}
endif
/set win ( )
The value of the JCWs hpmonth and hpdate may be single digits (for example on
January 1, 2000) so we may need to insert leading zeros (99/1/1 becomes 99/01/01).
We do this by testing for the existence of a "/" and a " " in specific columns. If there
is a "/" in column 5, we know that the month value is a single digit.
I/O Redirection
On MPE/iX, you can have I/O redirection in command files. The "<" and ">"
characters are used to specify I/O redirection, so there are some restrictions in using
them in a command file's Qedit commands.
Any occurrence of "<" or ">" means I/O redirection, unless these characters are part
of a string. However, the string can only be delimited by a single quote (') or a
double quote ("). The other string delimiters usually accepted by Qedit do not work.
For example,
/find \\
works as a Qedit command on-line, but does not work in a command file, because
the "<" and ">" are interpreted as I/O redirection.
Command Files Security
Qedit needs only Read or eXecute access to command files. However, for security
reasons you should use only eXecute access. This way, no one will be able to look at
the file contents, nor will they be able to use a Help command on it.
Users will be able to run only the command file.
QEFILE Variable
When executing a command file from inside Qedit, Qedit updates the variable
QEFILE with the name of the file. This variable is a substitute for the MPE variable
HPFILE, which is used in the same manner by the Command Interpreter.
You can write your command files using only HPFILE. During execution, Qedit
replaces all occurrences of the word HPFILE wit QEFILE before executing each
command. This way, your command files should execute the same way whether they
run from the CI or from Qedit. You don't have to check the INSIDEQEDIT JCW.
You have to keep in mind that, if you use Option List or if there are messages that
contain HPFILE, the messages will now show QEFILE.
286 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
Warning and Error Messages
You can control the appearance of warning and error messages via the
HPMSGFENCE variable when executing commands, UDCs and command files by
MPE. Qedit has no way to check the value of this variable when it executes the same
commands, thus HPMSGFENCE has no effect. An equivalent feature has been
implemented via a user variable called ROBMSGFENCE. It uses the same values
and meanings as HPMSGFENCE but applies only to commands executed by Qedit.
You can change its value at any time and the change takes effect immediately.
setvar robmsgfence 1
setvar robmsgfence 2
setvar robmsgfence 0
{suppress warning messages}
{suppress error and warning messages}
{default, displays warning and error messages}
Here are some examples:
/purge nofile
File "!" not found. No purge done. (CIWARN 383)
/setvar robmsgfence 1
{suppress warnings}
/purge nofile
/build nofile;temporary
Unknown keyword for BUILD command. (CIERR 299)
/setvar robmsgfence 2
{suppress errors and warnings}
/build nofile;temporary
/setvar robmsgfence 0
{display errors and warnings}
/build nofile;temporary
Unknown keyword for BUILD command. (CIERR 299)
/purge nofile
File "!" not found. No purge done. (CIWARN 383)
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 287
Calculator Command [=]
The calculator evaluates an expression and prints the result.
=expression [,O | D | B | H | A | # % $]
Any command that begins with an equal sign (=) is treated as an expression to be
evaluated. An expression consists of numbers and operators, followed by an optional
display format. The operators can be addition (+), subtraction (-), multiplication (*),
division (/), or exponentiation (**). The value of the expression is printed
immediately on Stdlist.
=20+15
{add two numbers together}
Result=35.0
=20*15
{multiply the same numbers}
Result=300.0
=20-15
{subtraction}
Result=5.0
=20/15
{divide, print precise result}
Result=1.33333333333
=20**15
{20 raised to the 15th power}
Result=.327680000000E+20
Order of Evaluation
Unlike most programming languages, the calculator always evaluates the calculation
from left to right. This is similar to an electronic calculator, where each keystroke is
operated on immediately. You can use parentheses to force the calculator to evaluate
the expression in a different order.
=14+16+15/3
{compute an average}
Result=15.0
=14+16+(15/3)
{add 14, 16, and the result of 15/3}
Result=35.0
=14+((16+15)/3)
{divide 16+15 by 3, then add to 14}
Result=24.3333333333
Percentages
A number in the calculator expression may be followed by a percent sign (%). The
calculator assumes that you want to qualify the number as a percentage.
=125*5%
Result=6.25
=125+125*5%
Result=12.5
=125+(125*5%)
Result=131.25
{what is 5% of 125}
{add 5% of 125 to 125}
{oops, we needed to change the order}
{this looks like the answer we wanted}
The last two examples show the importance of the order in which calculator
evaluates the expression. We needed to use parentheses to force calculator to
evaluate our expression in the correct order.
Display Formats
A calculator expression may be followed by a comma and a display letter. The
default is decimal (#) and the options are Hex ($ or H), Octal (% or O), Double (D),
ASCII (A) and Binary (B). With these options, the result is treated as a 32-bit
integer.
288 • Qedit Commands
Qedit 5.9 for HP e3000 User Manual
=10,%
{standard octal format}
Result=%000012
=-10,%
{negative number in octal}
Result=%37777777766
=100,$
{hexadecimal}
Result=$0064
In Double format, calculator prints the double result as two octal numbers. The first
number represents the high-order 16-bits and the second number represents the loworder 16-bits.
=10,d
{treat result as two 16-bit octal words}
Result=%000000 %000012
=1000000000,d
{high-order 16-bits are nonzero}
Result=%035632 %145000
=-10,d
{note negative value, 2's complement}
Result= %177777 %177766
In ASCII format, up to four characters are printed in hexadecimal, decimal, and
ASCII display format.
=$2020,a
Result=$2020: 32,32 :" "
=%20161 %72145,a
Result=$2071: 32,113:" q"
$7465:116,101:"te"
In Binary format, the high-order 16-bits are examined. If these bits are not zero, they
are printed as two groups of eight bits. A one (1) means that the bit is on and a zero
(0) means that the bit is off. The low-order 16-bits are always printed as two groups
of eight bits.
=10,b
{high-order 16-bits suppressed}
Result=%(2)00000000 00001010
=-10,b
{note negative value, 2's complement}
Result=%(2)11111111 11111111 %(2)11111111 11110110
=1000000000,b
{high-order 16-bits are nonzero}
Result=%(2)00111011 10011010 %(2)11001010 00000000
Input Format
The calculator supports different input formats for numbers. Octal values are
prefixed with a percent sign (%) and hexadecimal values with a dollar sign ($).
Decimal is assumed by default, but decimal values may be prefixed with # if desired.
An ASCII string of up to 4 characters is entered in quotes. The result of the last
calculation is referred to using #.
=%12
{octal 12 or decimal 10}
Result=10.0
=%12,o
{octal input and octal display format}
Result=%000012
=$10
Result=16.0
=%177766
{octal number that is really negative}
Result=-10.0
="abcd",h
Result=$61626364
=#,a
Result=$6162: 97,98 :"ab" $6364: 99,100:"cd"
Programmers who make use of octal dumps are often frustrated when 32-bit integers
are printed as two 16-bit integers. To help with this problem, the calculator will
accept two octal numbers as input and print the result in standard decimal format.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 289
=%35632 %145000
{treat as one 32-bit integer value}
Result=1000000000.0
=%177777 %177766 {negative 32-bit integer value}
Result=-10.0
Calculator Help
The calculator offers a number of options. You can refresh your memory on the
calculator's abilities by entering
=?
290 • Qedit Commands
{? gives help}
{prints a summary of = functions}
Qedit 5.9 for HP e3000 User Manual
POSIX Commands [!]
There is an easy way invoke and execute the Posix shell (SH.HPBIN.SYS). Any
command that starts with an exclamation mark "!" is interpreted as a Posix
command. If the exclamation mark is the only character entered, Qedit starts the
Posix shell. The user has to exit out of the shell to get back in Qedit.
/!
####################################
MPE/iX Shell and Utilities (A.50.02)
COPYRIGHT (c) Hewlett-Packard Company 1992, All Rights Reserved.
####################################
/MYACCT/MYGROUP> exit
/
Qedit uses the following command to start the shell:
xeq sh.hpbin.sys info="-L"
If the line contains text after the exclamation mark, Qedit assumes the text is a Posix
command. The text is then passed as is to the Posix shell for execution. The shell
terminates automatically at the end of execution and returns to Qedit.
/!uname -a
####################################
MPE/iX Shell and Utilities (A.50.02)
COPYRIGHT (c) Hewlett-Packard Company 1992, All Rights Reserved.
####################################
MPE/iX CALVIN C.60.00 C.16.01 SERIES 968LX
/
Qedit uses the following command to execute Posix commands:
xeq sh.hpbin.sys info="-L -c 'uname -a'"
Notice the command text is enclosed in single quotes to preserve delimiters. If a
command already contains quotes and double-quotes, Qedit automatically doubles
them up in the final command. For example,
/!echo "This is 'my' message"
####################################
MPE/iX Shell and Utilities (A.50.02)
COPYRIGHT (c) Hewlett-Packard Company 1992, All Rights Reserved.
####################################
This is 'my' message
Internally, Qedit uses the following command:
xeq sh.hpbin.sys info="-L -c 'echo ""This is ''my'' message""'"
The command text must not contain another exclamation mark. Otherwise, Qedit
interprets them as string delimiters and tries to search for the text in the current
workfile.
Qedit 5.9 for HP e3000 User Manual
Qedit Commands • 291
Troubleshooting and Error
Messages
Introduction
When Qedit encounters an error condition, it prints an error message (Error: xxx) or
a warning message (Warning: xxx). For file errors, Qedit prints the intrinsic name
(Fopen), the file system error number (Err. 50, or a message for common errors) and
the file name, if available. An error message will cause the rest of the command line
to be skipped, and, in batch mode, will cause Qedit to terminate with an error abort.
A warning message, on the other hand, does not stop the rest of the command line
from being executed, nor does it cause Qedit to abort in batch mode.
Messages
Most error and warning messages are self-explanatory. The older, more cryptic ones
are explained below.
Message
Explanation
Already.
The line number that would next be created already exists in the
workfile; duplicate line numbers are not allowed. This error often
stops an Add command.
Com Name.
The first character of a line or after a semi-colon is not a valid
command.
Create.
Unable to create a process needed to complete a :Compile, :Run,
or :Prep command. There may be too many jobs on the system, or
the program may be allocated with a different LIB= option.
Empty.
The external file you have referenced does not contain any lines.
EOF In.
Caused by an :EOD or :EOJ entered in column one of a command
or data input line. This error always terminates Qedit (example:
:EOD).
Equals.
Equals sign (=) is missing from the command (example: Add 5
FILE); most are optional.
Extra.
A command is followed by extra characters when it should be
ended (example: A 500?).
Fclose.
Unable to close a new workfile or Keep file. Most common
Qedit 5.9 for HP e3000 User Manual
Troubleshooting and Error Messages • 293
reasons are Error 93 (file security), or Error 100 (already exists).
Fcontrol.
Unable to perform a control operation (such as logical rewind) on
a file.
Fgetinfo.
Unable to get file status.
Filename.
An invalid file name has been specified (e.g., K 123).
Fopen.
Unable to open a file. Most common reasons are "no such file"
and "bad file name" (example: L ABC1234567).
Fread.
Unable to read sequentially from an external file. There is no good
reason for this error that we are aware of.
Freaddir.
Unable to read a block from a workfile. Almost always indicates a
"broken" Qedit workfile.
Full.
The current workfile is full, and the last line added is lost. Text the
workfile into a new, larger workfile e.g. Text workfile (newsize),
or use Garbage to compact the current workfile. Read the section
on Set Work to see some examples that increase the size of a
workfile.
Fwrite.
Unable to write to a file (example: L LP,ALL; K KFILE).
Fwritedir.
Unable to write a block to the current workfile. Probably indicates
a confused workfile.
In Use.
The external workfile cannot be accessed, because it is being
edited on some other terminal, or someone aborted Qedit with the
file open. You can recover such files by Opening them.
'Language' is now xxx
The current language setting has been changed by Open, Text or
Set Lang. This may also change the INCR, WINDOW, etc.
Linenum.
The command contains an invalid line number (example: L
5.9999).
LP Open.
Unable to open a file to the LP (formal designator is LP; device is
LP, unless changed via the :File command).
Modify.
Illegal control character in a Modify line; an ASCII character with
a value less than 32, that is not in the Set Modify list of codes.
No Line.
A specific line number is required, but does not exist (example:
AJ 100, when line 100 doesn't exist).
No Open.
A workfile must be Opened before any editing can be done.
No Write.
The workfile cannot be Opened with write access. Someone else
may be editing the file, or you may not have proper security
access to the file.
Overflow.
A data line has been entered (Add, Replace) or created (Change,
Modify) that is greater than the maximum length allowed by the
current language setting. Or, a file has been Texted that is too
large for the workfile (the Text is rejected; you may have to adjust
Set Work Block to allow for line lengths greater than 60 bytes
average).
Param.
A parameter of the command is illegal (example: S Work Size
ABC)
Paren.
A required left or right parenthesis is missing (example: Set
Window (Up)). Many are optional.
Priority.
You have been dropped into a lower priority level because of a
system limit. Use V to examine the limits and Set PRI to resume
your previous level.
Proc.
Unable to load the procedure named from the library specified;
you may have specified the wrong library, or spelled the
procedure name incorrectly (example: P ROUTINE-1,S,1).
Range.
In a range, the second line number is less than the first (example:
294 • Troubleshooting and Error Messages
Qedit 5.9 for HP e3000 User Manual
List 4/3).
Recovery.
The file just Opened was not closed properly the last time it was
used; the file is being recovered. See Open command.
Size.
An illegal size in a new workfile (example: New ABC(1B3)).
String.
The string is not correctly formatted; either the ending quote is
missing, or the string is too long (example: C 1,"ABC!,510).
Target.
Format error in the target area of the Change command (example:
C 53,"ABC",1).
Too High.
In Renumber, the starting line number is too high. Qedit cannot
find an increment small enough to renumber all of the lines in the
file. (example: Ren 99999). Choose a lower starting line number.
Window.
Format error in column search window (example: Set Window
(1020,MART)).
System Errors
For certain errors, Qedit prints a file "tombstone" to give the reason for the error. The
message is formatted as a large block of information in a box. Although all of the
fields printed can be important, the two most useful things are the FILE NAME (first
line) and the ERROR NUMBER (second from last line). You should determine
whether the file in question is your current workfile, an external file, or a listfile
(LP). The most common ERROR NUMBERS are as follows:
0
end of file
46
out of disc space
50
no such account
51
no such group
52
no such file
54
invalid file name
55
device not available
61
out of group space
62
out of account space
63
need ND capability
90/91
file in use
92
lockword error
93
security violation
100
duplicate file name
Quit Errors
After serious file system errors, Qedit will print the file system error and the
following message, and then abort:
Qedit 5.9 for HP e3000 User Manual
Troubleshooting and Error Messages • 295
Warning: This error can only occur if 1) :File is used to fool Qedit,
2) hardware has problems, 3) you have exceeded your group or account
disc space limits, or 4) Qedit has a bug. Qedit will now abort to
prevent any damage to your workfile. Before attempting to recover your
file, you should back it up with Fcopy, Suprtool, or :Copy. If recovery
after an Open command is not complete, use Qcopy with the Serial option
on the backup.
Errors in Visual
There are a number of problems that you may encounter when using Visual. We
have tried to list all of them here.
Using Visual with X.25
When configuring X.25 pads, be certain to configure large enough buffers. Visual
can transfer up to 30,000 bytes in a single read (see Set Visual Buf).
With Term Type 24, Visual enables Auto-Keyboard Lock on your terminal to lock
the keyboard during block-mode transfers. MPE takes care of this with direct
connect. Older terminals lack Auto-Keyboard Lock.
If you use Term Type 10 or a special Term Type created with the Workstation
Configurator, you will need to use Set Vis Packet On to get the F7 key to work.
Using Visual on MPE/iX
On MPE/iX, Visual will enable Auto-Keyboard Lock on your terminal, as described
above for X.25. You must configure your terminal for Transmit and Receive
XON/XOFF Pacing or you risk file system errors.
Qedit can detect whether your terminal is connected to a DTC and adjust itself. You
can over-ride the DTC-detection with Set Vis DTC ON (for example, in the case
where you NS from a MPE/iX to a MPE V machine and run Qedit on the MPE V
machine)
Accidental Invocation of MPE/iX CI
If you make a typo and accidentally type CI instead of VI when you want to get into
Visual mode, a new copy of the MPE/iX Command Interpreter (CI) is started inside
Qedit, and you end up at the MPE prompt. This can be very confusing, especially
since it looks as though you just pressed Break. In fact, the "CI" was interpreted by
Qedit as an implied :Run command because there is a program called CI.Pub.Sys
(the MPE/iX Command Interpreter). You should see the following message:
Warning:
Nested MPE XL Cmd Intrptr.
:EXIT will get you back
To check whether you are in this second Command Interpreter, you can SHOWVAR
HPCIDEPTH. If you ran Qedit from the MPE prompt, this value will now be 2.
To get back to Qedit, do not run Qedit again. Instead, type EXIT or a colon, to get
out of the CI and back to Qedit.
296 • Troubleshooting and Error Messages
Qedit 5.9 for HP e3000 User Manual
Using Visual on HP-UX
Visual mode should work on HP-UX, providing you have an HP terminal or an HP
terminal emulator. You must configure your terminal for Transmit and Receive
XON/XOFF Pacing or you risk file system errors.
You must also configure the host prompt to be a DC1 (Control-Q). Because there are
few block-mode applications for HP-UX, the host prompt is often configured as null.
Terminals Supported by Visual
Visual will work on most HP terminals with block-mode, such as the 700/9x, and
2392. It also works on most emulators of HP terminals, such as Reflection for DOS,
Windows, and Macintosh; AdvanceLink for DOS and Windows; and Session for
Windows and Macintosh.
Visual may work over DS, but only one machine away and only if you define
sufficient buffers for your DSLINE.
Visual does not work on the 2640/41/44, 2621, 125, 120, 110, or the 700/4x
terminals.
Problems with 700/9x Terminals
Occasionally a 700/92 or 700/94 terminal will refuse to work properly in Visual
mode. Symptoms include Qedit saying that it is not a supported terminal, or giving
the infamous "No // at end" message, when the "//" is clearly on the screen. We have
found that resetting the terminal to factory default settings sometimes sets this right
again. This is more than a regular soft or hard reset, more than turning the terminal
off and on: it is a special reset, involving a reboot of the terminal firmware from
ROM.
Verify the baud rate at which the terminal is configured, then log off the host, and
power off the 700/9x terminal. Wait a few seconds, then turn the terminal back on
WHILE HOLDING DOWN THE "D" KEY. Keep the "D" key pressed until you
hear a beep. The terminal will show the message "default configs used". Set the baud
rate, and ensure that the Xmit Pacing and Recv Pacing fields are both set to
XON/XOFF. Log on again and try Qedit Visual mode.
Visual Error Messages
Here are the messages that may appear if you encounter errors in Visual mode.
Define String: press Home Up, Clear Line, type "string", press Enter. You
cannot use F3 or F4 (Findup, Find) until you have defined and found the string once.
Press Home Up, type "string" (or ^"string" for Findup), then press F7 or Enter.
Parameter missing or illegal in home line. You have typed a command in the home
line that Qedit cannot understand because it is incomplete or typed incorrectly.
Not enough line numbers to add new lines. If you add too many lines in one area,
Qedit can run out of unique line numbers to assign to new lines. Check that Set Vis
Renum is ON (it is by default). Unfortunately, even this will sometimes not make
room. In this case, Qedit writes your screen image to a disc file named qscreen (the
file is temporary on MPE) and does not update the lines.
A recovery method is to renumber that part or all of your file and then copy in the
lost lines from the qscreen file. Since qscreen contains a screen image, you will need
to remove certain rows and columns to extract the raw text:
Qedit 5.9 for HP e3000 User Manual
Troubleshooting and Error Messages • 297
Press F8 to return to Line mode
/renum all;list *-10/*+10
/list qscreen
{now select line range to copy}
/add 100.10=qscreen 5/23 {text lines only}
/change 1/4 "" 100.10/* {remove columns}
No // at the end, so no UPDATE (see qscreen).
If you press the Clear Display key and then press Enter, Qedit will read your screen
and object to it. Qedit looks for // in the first two columns of the last screen line -the one containing the column template. If Qedit does not find these two slashes, it
concludes that you have done a Clear Display, or deleted the template line, or typed
in so many new lines or characters that Qedit does not have a big enough buffer to
read the entire screen. Qedit then appends your screen image to the qscreen file and
does not attempt to update the lines. If the Clear Display was legitimate, type // in
column 1 after the last line.
Missing or invalid status line, no UPDATE (see qscreen). Under some
circumstances the start of the status line is not transmitted properly to Qedit, even
though the rest of the screen is okay. Therefore, Qedit now looks for the line number
field in the status line, enhanced as Inverse Halfbright. If that is not found you will
get the message "Missing or invalid status line". Your screen has not been updated,
but it has been appended to the qscreen file. You can do list $char qscreen
to see what was actually received by Qedit or to recover your lines.
Home line (===>) not transmitted, no UPDATE (see qscreen). If Qedit detects
the status line as the first line of your screen, you will get the error message "Home
line (===>) not transmitted". This either means that you deleted the home line or
data was lost at the start of your transmission or you inserted too many lines with Set
Vis Cleardisplay Off. Your screen has not been updated, but has been appended to
the qscreen file. You can do list $char qscreen to see what went wrong or
to recover the data.
NO UPD: bad format left 4 columns (see qscreen). Qedit uses + and - indicators in
columns 1 and 2 to keep track internally of which line on your screen has which line
number. If you move the lines around (not using cut-and-paste) so that these
indicators are out of sequence, Qedit objects. Qedit does not update your lines, but it
does write them to qscreen. If you move lines around on the screen, you should erase
the +n to -n indicators.
Cannot update. To Exit, press * F7 (refresh), then F8 (exit). Set Vis Update is
ON and you have pressed F8 to exit. However, Qedit is unable to update the current
screen likely due to the bad screen format described above. To exit, first refresh the
screen (* in the ===> line, press F7), then press F8 again.
Inconsistent or badly formed cut-and-paste task (DD/MM/CC/HH). If you put
both a CC and an MM on the same screen, you will get this error message. It means
that the indicators you have used do not combine in a logical way. Check the Status
line to see what cut-and-paste function is pending. You may also see this message if
you enter an unknown indicator (e.g., NN instead of MM).
Duplicate cut-and-paste task; press F7 to reset DD/MM/CC/HH. Only one cutand-paste function is permitted per update. For example, you cannot copy a block of
lines to the Hold file with HH, and on the same screen use R to replicate a line.
Cut-and-paste operations are limited to 32000 lines or less. The maximum
number of lines that you can move, copy, hold or delete in a single task is 32000.
Problem accessing Hold file; unable to cut-and-paste. When you use HH, HJ, AH,
BH, PH, or FH, Qedit must access a temporary file called Hold. When you use MM,
CC, DD, JJ, RR, A0, B0, F0, or P0, Qedit must access a file called Hold0. This
298 • Troubleshooting and Error Messages
Qedit 5.9 for HP e3000 User Manual
message means that an error has occurred in accessing this file. Does another process
in your session have it open? Or are you out of disc space?
File full. Part update. Suggest Exit, see qscreen. If you add enough lines to a
workfile, eventually it will fill up! Visual will then be unable to add in the new lines
from your screen. When this happens, Qedit appends a copy of your screen image to
the qscreen file (from this file you can recover the lines that were not added, if you
desire). To expand a workfile named ABC, do Text ABC and Shut *.
File nearly full! Qedit will warn you when your workfile has only a block or two
left. This is your advance warning that soon you must do a Garbage collection in
your workfile, or expand the workfile.
Read error on CRT. Try again or reduce speed. You will probably have some
problems if you run your terminals at 9600 baud on ADCCs (Series 40, 44, 48, etc.)
or you do not configure your system with enough terminal buffers (Visual screen
reads can be up to 30,000 characters).
To turn down your terminal speed, use F8 to get out of Visual (after updating the
screen), then:
/Exit
{or F8 again}
END OF PROGRAM
:SPEED 240,240
CHANGE SPEED AND INPUT "MPE":
Overflow of screen buffer (maximum is 30,000).
Cutting screen in half.
Consider using Set Vis Widen Off.
It seems that some LANs cannot tolerate Qedit's huge 6000 byte transfers. If
Qedit/MPE determines that you are operating over a LAN, and your Visual screen
would be more than 3500 bytes, it issues an error message which includes a hint on
how to reduce your screen size. The size of the write is determined by the left and
right margins of your text, and the number of lines that you want shown on the
screen (configured via Set Visual Above and Below).
Analyzing Compiler Problems
Qedit provides interfaces that allow both the CM and NM compilers to read Qedit
files. Since both interfaces are simulating the file system, problems do occasionally
arise.
QCOMPXLTRACE JCW
When you have a problem where the NM compiler fails with XL=
"Qcompxl.Pub.Robelle", but works without it or when compiling a Keep file, you
should report it to Robelle for correction.
If you Setjcw QCOMPXLTRACE to 1 before compiling, Qcompxl will print a trace
of all file activity, which may assist us in resolving the problem. It is also helpful if
you can send us compiler listings and even the source code so that we can duplicate
the problem on our system.
Qedit 5.9 for HP e3000 User Manual
Troubleshooting and Error Messages • 299
Control-Y and NM Compiles
Normally, Qcompxl (the interface to NM compilers like Pasxl) enables Control-Y so
that you can stop the compile by depressing Control and the Y key. If the tool that
you are using Qcompxl with has its own Control-Y interrupt, you can tell Qcompxl
to leave Control-Y alone. Before you run with XL="Qcompxl", do this command:
:setjcw qcompconyoff 1
How to Bypass Qcompxl
You may find that a tool will read Qedit files when run with XL = "Qcompxl", but
has certain functions such as file copy where it needs to treat the Qedit file as a
regular binary file. In that case, the tool could be modified to bypass Qcompxl for
certain functions. Set the QCOMPXLBYPASS JCW to 1 before the exception
function, then reset it to 0 after.
Problems with HP's C Compiler
If you have trouble compiling a Qedit file with HP's C compiler, first check that the
file is "unnumbered" (Verify Keep Num Off). Then check that the CCXL command
file has Xl='qcompxl' in it; if not, stream Savecmdf.Qeditjob and Qcompxl.Qeditjob
to update the command file.
As a final step, you can check the C run-time. The Qcompxl compiler interface
contains a copy of the C run-time library so that it can trap file opens. After an HP
update, it is possible that this run-time library may be incompatible with your new
compiler. To copy the C/iX run-time code from your system XL to Qcompxl, use the
Fixccxl.Qeditjob job stream.
Unresolved External Reference
When Qedit is installed, it changes the CM compilers slightly to redirect file system
calls to the Qcompusl routines instead. If you get an "Unresolved External" error
message when you compile, it means you are running a "Qedit-compiler" without the
Qedit library routines. The most probable cause is that you have just done an MPE
update, which removes the Qedit routines from the System SL. The solution is to reinstall the Qedit compiler fixes.
Illegal Characters
When you compile a Qedit workfile and the compiler gives you a hundred "illegal
character" or "invalid symbol" errors, it means you are not using the Qedit compiler
interface. You may have just installed an MPE update and thus have standard
compilers and command files in Pub.Sys again.
If you are using a CM compiler and installed the CM interface isolated in the Robelle
account, you may have tried compiling from the MPE prompt. Qedit workfiles can
only be compiled from within Qedit, not through the regular :MPE commands.
Pascal/V Compiler Stack Overflow
The compatibility-mode HP Pascal compiler may stack overflow when compiling
large source files, especially when it has been "Qedified" to read files in Qedit
format. This is because when we "hook" the compiler to read Qedit files, we steal a
300 • Troubleshooting and Error Messages
Qedit 5.9 for HP e3000 User Manual
couple of hundred words of global storage space from the compiler's stack. We
recommend that you use the $bigcompile$ compiler directive to prevent this
stack overflow problem. For smaller source files, this option will slow down the
compilation speed.
Qedit 5.9 for HP e3000 User Manual
Troubleshooting and Error Messages • 301
File Formats
Introduction
Here we describe the format of Qedit workfiles, external Keep files, and error-files
used by the Editerror command.
Qedit Workfiles
The Qedit workfile provides both random and sequential access to variable-length
lines of text. The file code is 111, the file is Binary, and the block factor is 1. The
workfile is broken into blocks. Each block contains several Qedit lines (the exact
number depends on the length of the lines). The lines in a block have contiguous line
numbers and are extracted from the block by Qedit.
Block 0 of the workfile has a special format because it contains the control and
indexing information.
The first Qedit line is always in block 1, and the start of block 1 points to the next
sequential block in the file, which need not be block 2. Each block points to the next,
and end-of-file occurs when the forward pointer is zero.
There are three different formats of Qedit workfiles: original, Jumbo, and WideJumbo. All formats work in Qedit for MPE and Qedit for HP-UX, but the default for
MPE is the original format while the default for HP-UX is Wide-Jumbo.
Original Format Workfiles
The original Qedit workfiles have a block size of 512 bytes and can hold up to
65,535 lines with a maximum length of 256 characters. Added control information is
kept in user labels.
Within an original format data block, the structure is as follows:
Qedit 5.9 for HP e3000 User Manual
File Formats • 303
Word Within Block
Contents
(000)
Forward-pointer
(001)
Line-number
(002)
(cont.)
(003)
Data and Indent
(004)
"AB"
(005)
"CD"
(...)
(cont.)
(...)
(Data+003)
"YZ"
(Data+004)
Line-number
(Data+005)
(cont.)
(Data+006)
Data and Indent
(Data+007)
"12"
(...)
(...)
"89"
(...)
Binary-zero
(...)
(cont.)
(255)
(cont.)
Comment
First word in block
First word of first line
Descriptor for first line
Contents of first line
End of first line
Start of second line
End of last line
Unused portion of block.
Binary-zeros are missing
if the block is full.
The following definitions are used above:
Forward-pointer: block number of the next block (16-bit unsigned).
Line-number: a 32-bit integer containing the line number in binary (1,000 = 1.0).
Data: the number of words of data in the line (byte).
Indent: number of full words of blanks before the data (byte).
Qedit Version Number
Open stores the version number of the Qedit program file into the workfile that it
opens. A 16-bit integer is stored at word offset 107 of user label 0 ("QEDIT0") or at
word offset 363 of Block 0 for Jumbo files. The format is, for example, 4258 for
version 4.2.58, 4300 for 4.3, and 4301 for 4.3.01.
Jumbo Workfiles
The Qedit Jumbo workfile is an extension of the original Qedit workfile. This format
allows files to be up to 1,000 characters wide, and up to 99 million lines long. The
file code is still 111, the type is still Binary and the block factor is still 1. The blocks
are 1024 bytes long instead of 512.
Wide-Jumbo workfiles allow lines of up to 8,172 characters and limit the number of
lines to 99 million. The blocks are 8,192 bytes long instead of 1,024 for Jumbo
workfiles.
As in the old Qedit format, each block in Jumbo or Wide-Jumbo contains several
Qedit lines (the exact number depends on the length of the lines). The lines in a
block have contiguous line numbers and are extracted from the block by Qedit.
Block 0 of the workfile has a special format because it contains the language of the
file and the number of lines, and provides indexing. Jumbo workfiles do not have
user labels. Information that was in user labels 0 and 1 is now in Block 0.
The first Qedit line is always in Block 1, and the first word of Block 1 points to the
next sequential block in the file. Each block points to the next, and end-of-file occurs
when the forward pointer is zero.
Within a data block, the structure is as follows:
304 • File Formats
Qedit 5.9 for HP e3000 User Manual
Word Within Block
Contents
(000)
Block type
(002)
Forward-pointer
(004)
Line-number
(005)
(cont.)
(006)
Data length
(007)
Indent
(008)
"AB"
(009)
"CD"
(...)
(cont.)
(...)
(Data+004)
"YZ"
(Data+005)
Line-number
(Data+006)
(cont.)
(Data+007)
Data
(Data+008)
Indent
(Data+009)
"12"
(...)
(...)
"89"
(...)
Binary-zero
(...)
(cont.)
(511)
(cont.)
Comment
First double-word in block
Second double-word in block
First word of first line
Descriptor for first line
Contents of first line
End of first line
Start of second line
End of last line
Unused portion of block.
Binary-zeros are missing
if the block is full.
The following definitions are used above:
Forward-pointer: block number of the next block (32-bit unsigned).
Line-number: a 32-bit integer containing the line number in binary (1,000 = 1.0).
Data: the number of words of data in the line (16-bit word).
Indent: number of full words of blanks before the data (16-bit word).
External Files
As well as its own workfiles, Qedit recognizes "external" files of other formats (in
List file, Add 5=file, Text file, etc.). When Qedit opens an external file, it determines
the language of the source program in that file according to the following chart. If
the file code is 1052, the file is always recognized as a COBOL-type file. Note that
"file code" refers to the MPE file code. Posix files with a ".cbl," ".cob", ".CBL" or
".pco" extension are treated as COBOL source files. In this case, Qedit does not
assume there is a sequence number in the first 6 columns; it checks the first 5 lines of
the file. The .pco extension is typically used to identify Cobol source files that
needs to be processed by the Oracle pre-compiler.
If the lines contain only numeric digits in these columns, Qedit assumes the file
contains sequence numbers and uses them appropriately. These numbers are written
back to the file when a Keep command is executed.
If the lines only contain spaces in these columns, Qedit assumes the file is
unnumbered and automatically assigns numbers during the Text operation. If some
of the lines have a sequence number already, this number is replaced with Qedit's
calculated number. When the file is saved, the sequence numbers are replaced by
spaces.
If the first 6 columns do not contain either numeric digits or spaces, Qedit assumes
the file is free-format and assigns it line numbers in the same way that numbers are
assigned to Text files. The file format might change on a Keep command, depending
on the Set Keep Cobfree option.
When accessing files in the Posix namespace, Qedit checks the extension of the file,
if any. It then tries to determine the language based on the extension.The following
languages are recognized:
Qedit 5.9 for HP e3000 User Manual
File Formats • 305
Language
Extensions
Cobol
CBL, COB
CC
H, C
CPP
CPP
HTML
HTM, HTML, ASP
JAVA
JAVA
PASCAL
P, PAS, PASCAL, MODULE, INCLUDE,
FORWARD, EXTERNAL
QSL
QSL
XML
XML
Extensions are not case-sensitive i.e. cbl is the same as CBL.
Record Leading
Size
Columns
(bytes) (1-6)
Contain
Last 8
Current
File
Columns Language Code /
of First
Setting*
Ext.
Line
Num / LANG Used
Unn?
74
both
Unn
COBOLX
66
both
Unn
COBOL
80
6 digits
both
Num
COBOLX
80
6 digits
not code
Unn
JOB
80
no digits
no digits
RPG
Unn
RPG
80
no digits
8 digits
FORTRAN
Num
FTN
80
no digits
8 digits
Pascal
Num
Pascal
80
no digits
8 digits
not Ftn/Pas
Num
SPL*
72
6 digits
Num
COBOL
72
no digits
FORTRAN
Unn
FTN
72
no digits
Pascal
Unn
Pascal
72
no digits
not Ftn/Pas
Unn
SPL*
80
no digits
Unn
JOB
88
8 digits
Num
JOB
9-264
8 digits
Num
TEXT
1-256
no digits
Unn
TEXT
1-256
no digits or
spaces
Unn
COBFREE
1-256
no digits
Unn
HTML
1-256
no digits
Unn
XML
1-256
no digits
Unn
JAVA
1-256
no digits
Unn
QSL
ext.
ext.
no digits
both
* see Set FORTRAN ON.
306 • File Formats
Qedit 5.9 for HP e3000 User Manual
In this table, the "File code / Ext." column indicates how Qedit determines which
language to use. Code means it uses the file code only. Ext. means it uses the file
extension only. Both means it checks the file code and the file extension.
Qedit maps an ASCII external file into one of these file formats. Qedit checks the
last eight columns of each of the first five lines for an ascending sequence number. If
five lines with valid sequence numbers are found, the file is treated as a Numbered
file. Qedit may sometimes mistake a data file for a source file with sequence
numbers. If there is an ambiguity in identifying the language of an external file, you
can direct Qedit to the proper choice by appending a file type to the file name in the
Text, List, and Add commands. For example, /List abc,unn;Text def,pascal.
External files with 80-character records and no valid SPL sequence numbers are
treated as RPG files, if the current language setting is RPG; otherwise, they are
treated as JOB files.
Qedit creates workfiles with two user labels for new control information. The user
labels are self-identifying and have internal version numbers. The first user label
contains status fields (saved on Shut and recalled on Open). This label is identified
by the string "QEDIT0" in the first 6 bytes, followed by a word containing the binary
version number. The second user label is identified as "QEDIT1" and is reserved for
future speed improvements.
If you are creating a new Qedit file by hand and you forget the user labels, Qedit will
still edit your file, but will not save the context when you shut the file. If you create a
new workfile with two user labels defined but NOT written, Qedit will initialize the
user labels the first time that you Open the files. This is how our QOUT routines
work.
User programs can create and read Qedit workfiles using the Qeditaccess routine in
our QLIB.
Error Files for Editerror
The :Editerror command in Qedit uses an error file to Open source files, position the
cursor to the line with the error, and print the error message at the top of the screen.
This useful feature works well with the Splash compiler, since it generates error files
in a format that Qedit expects. For other compilers, you could write an error
processor to generate this file.
When using the :Editerror command, the format of the error file is as follows:
1.
Lines are variable-length or fixed-length.
2.
The file should be ASCII.
3.
Each line has the form: prefix-character blank data
4.
The format of the data varies depending on the prefix-character.
Prefix Characters & Data
Prefix
Purpose
#
open workfile whose name is left-justified in column 3.
@
syntax error, location and message, in last file opened:
>
open of $include workfile, with name of new input file starting in column 3
(or use "#" if you prefer).
<
close of $include file, with name of prior input file starting in column 3 (or
use "#"). The ">" and "<" instead of "#" do not have any deep meaning: they
Qedit 5.9 for HP e3000 User Manual
File Formats • 307
only improve readability of the file.
@ Syntax Error Record
The "@" error record must be preceded by a record that opens the file containing the
error. This can be either a "#", ">", or "<" record.
Column
Content
1:
@
2:
Blank
3-10:
Sequence number
11:
Blank
12-end:
error message or, optionally,
12-15:
(##) column number of error, 1 = first column
16:
blank
17-end:
error message
The sequence number can be the full 8 digits that would appear in the last 8
columns of the Keep file (or 6 digits that would appear in the first 6 columns of a
COBOL file). For unnumbered files, the sequence number would appear as either of
the following:
•
1-based record number, up to 5 digits, followed by "000" (first record is
"00001000"), or
•
"R#" followed by 1-based record number and spaces (first record is
"R#1 ").
Here is a sample error file with two compile errors:
#
#
#
#
@
#
@
ERRFILE.BOB.GREEN
cstdio.pub.tym
ERRFILE.BOB.GREEN
INCFILE.BOB.GREEN
00002000 Identifier expected.
ERRFILE.BOB.GREEN
00012000 Undeclared identifier "k".
Here is another errors file, with column numbers:
#
@
@
@
@
308 • File Formats
errfile.bob.green
00005000 (11) Identifier "dddd" not defined.
00009000 (23) Type Incompatibility for assignment.
00012000 (11) Missing ":" or undeclared identifier.
00014000 ( 7) Label referenced but not found: fast
Qedit 5.9 for HP e3000 User Manual
User Routines
Introduction
The user can direct Qedit to call "interface" procedures to customize certain aspects
of Qedit. Interface "hooks" are available for initiation ("Init") and termination of
Qedit ("Exit"); for processing command input ("Com"); for examining new lines
("Add") entered via the Add command; and for intercepting all Modify operations
(see below). You activate the interface procedures via a special command in the
Qeditmgr file:
interface add,com,exit
interfaceg add,com,exit
interfacep add,com,exit
{searches sl.logongroup}
{searches sl.pub.logon}
Interface causes the "Init" procedure to be called, and "Add", "Com" and "Exit"
select which interfaces to activate (any or all). If different options are desired for
different users, the Interface command can also be invoked through a usefile. These
procedures are loaded dynamically from the System SL by default. In order to load
from the logon account SL, use INTERFACEP; and from the logon group SL, use
INTERFACEG. There is another faster way to activate interface procedures,
described below under Alternate Activation.
Wide Lines and User Procedures
In order to support wider files, we had to increase the size of numerous internal data
structures. Because the CM stack did not provide enough space for these structures,
we were able to make this feature available only in the NM version.
You can write User Interface procedures to perform additional processing of either
new lines or commands you enter. Typically, these routines are written in SPL and
are compiled in SL files. The new wide-line structures cannot be passed to CM
routines without changing and recompiling them. These routines would also have to
be revised to make sure they can handle the extra amount of text. That's assuming
there was enough stack space left.
For these reasons, we have decided to continue using CM functions to exchange
information with user procedures. In order to do this, we had to limit the information
to 1,000 characters. If you are trying to edit a file with lines wider than 1,000 bytes,
Qedit displays the following warning:
Qedit 5.9 for HP e3000 User Manual
User Routines • 309
User Procedures can not handle more than 1000 characters...
Qedit then truncates the line to the first 1,000 characters before it hands it off to the
user procedure.
"Init" Interface Procedure
logical procedure qedit'userinit
(string,len,userspace,procspace);
byte array string;
integer len;
array userspace,procspace;
option external;
The "Init" procedure is called once when the Interface configuration command is
processed. The procedure can return a string of commands to be executed, and
activate, deactivate, or initialize working storage for other interface procedures.
Parameters of "Init"
STRING is a byte array where the Init procedure can return the characters of a
command line; there may be up to 256 characters. The string can contain multiple
commands, if separated by semicolons. The STRING does not need to have any
special terminating character, but the buffer is actually 257 characters long to allow
room for a stop byte if you need it. (Note: this command line will be passed to the
"Com" interface procedure.)
LEN is the number of command characters in the STRING. This variable must be set
to the proper value by the Init procedure. In no case can it have a value greater than
256; this results in Qedit abort #112. Upon entry, this parameter has a value of 0 (see
"Exit" interface below). The STRING will always be executed, if the LEN is greater
than zero.
USERSPACE is a 10-word array that provides "global" storage for interface
procedures; it can be used to pass parameters between the various interface
procedures. The 10 words are initially set to binary zero and can be used for any
purpose. EDIT/3000 places file numbers in the first two words of the USERSPACE
and Qedit does not; therefore, it is possible for an interface routine to check whether
it has been called from Qedit or Editor, by checking the first word of USERSPACE
for zero (Qedit) or nonzero (HP Editor).
PROCSPACE is a 28-word array that is shared with the PROCEDURE command.
The first 20 words are reserved for the user code and are initialized to zero. In
Qedit/V only (not Qedit/iX), the USERSPACE is located directly before the
PROCSPACE (i.e., they are contiguous in memory).
Following the 20 user words, PROCSPACE contains 8 words that hold context
values and flags. The first word contains the number of words of DL space reserved
for the PROCEDURE command (see Set DL). The second word contains the current
language setting (0=SPL, 1=FTN, 2=COBOL, 3=undefined, 4=COBX, 5=JOB,
6=RPG, 7=TEXT, 8=PASC). These two words must not be modified. The other
words are described below under "Alternate Activation".
Here is a diagram of the USERSPACE and PROCSPACE:
310 • User Routines
Qedit 5.9 for HP e3000 User Manual
SPL
-9
-1
0
19
20
21
22
23
24
25
26
27
---------------| 0
|
| USERSPACE
|
| 9
|
---------------|
|
| PROCSPACE
|
|
|
|
|
---------------| DL SIZE
|
| "Language" |
| Add plabel |
| Com plabel |
| Exit label |
| Mod plabel |
| flags
|
| split index |
----------------
FTN
1
10
1
20
21
22
23
24
25
26
27
28
Return value: Return False to stop Qedit from loading the other procedures called for
in the Interface command (alternate activation is not suppressed, see below). Return
True to allow Qedit to load the procedures listed in the Interface command ("Add",
"Com", "Exit"). If you are using the Alternate Activation method (below), return
False to suppress Qedit's loading the routines again. If Len is returned with a value
greater than 0, the String commands will be executed, regardless of whether True or
False is returned.
"Com" Interface Procedure
logical procedure qedit'usercommand
(string,len,userspace,procspace);
byte array string;
integer len;
array userspace,procspace;
option external;
The USERCOMMAND procedure allows the user to scan command input lines and
change commands within the line. This procedure is called each time a command
input line is read from the terminal, from a usefile, or from the Init procedure.
Parameters of "Com"
STRING is a byte array containing up to 256 characters of a command input line. If
the line contains multiple commands, they must be separated by semicolons.
Upshifting has not yet occurred, nor is there a terminating carriage return. Automodify (special character at the end of the line) and Before have been processed,
trailing blanks have been eliminated, the command line has been echoed, and the line
has been saved as the "last command". MPE commands have not been intercepted
yet. They are passed to the interface. A few special commands from usefiles such as
COMPPRI are never sent to the interface command. The user interface procedure is
also allowed to use two more bytes (i.e., a total of 258) beyond the length of the
STRING for internal purposes, such as inserting a terminating carriage return.
LEN is the number of characters in STRING. If the user procedure changes the
length of the command line, it must ensure that LEN is updated. In no case can LEN
exceed 256 characters (Qedit abort #113).
USERSPACE and PROCSPACE: same as above (Init).
Return value: FALSE rejects the command line; TRUE causes it to be processed by
Qedit.
Qedit 5.9 for HP e3000 User Manual
User Routines • 311
"Add" Interface Procedure
logical procedure qedit'useradd
(string,len,userspace,procspace);
byte array string;
integer len;
array userspace,procspace;
option external;
This procedure is activated by the "Add" parameter of the Interface command.
The "Add" procedure allows you to examine (and modify) each line that the user
Adds into the workfile (only basic Add, not copy, move or join from file).
Parameters of "Add"
STRING is a byte array containing the characters of a workfile line entered by the
user. Maximum length is determined by the current language setting (JOB=80,
SPL=72, FTN=72, COB=66, COBX=74, RPG=80, PASC=72, TEXT<=256). Any
TABs and shift operations have been performed.
LEN is the number of characters in the line. If the user procedure adjusts the length
of the line, this variable must also be adjusted. If the user procedure extends the
length beyond the current language limit, Qedit truncates the line. In no case can it
exceed 1,000 characters (Qedit abort #111). The user procedure is allowed to use two
bytes beyond LEN for internal purposes (such as a terminating character).
USERSPACE and PROCSPACE: same as above (Init).
Return value: FALSE causes the line to be rejected; TRUE causes it to be Added to
the workfile.
"Exit" Interface Procedure
logical procedure qedit'userinit
(string,len,userspace,procspace);
byte array string;
integer len;
array workspace,procspace;
option external;
This procedure is activated by the "Exit" parameter in the Interface command. When
Qedit is about to terminate, it calls the Exit procedure. (Note: Exit is actually the
same as the Init procedure, except that upon entry, LEN equals 4 and STRING
contains the word "Exit".)
Since this is called once upon Exit from Qedit, it can be used to complete the work
of other user procedures.
Parameters of "Exit"
STRING and LEN are set to "Exit" and 4 respectively; these should not be changed.
The current workfile has been closed, and no further commands can be executed.
USERSPACE and PROCSPACE: same as above (Init).
Return value: ignored.
312 • User Routines
Qedit 5.9 for HP e3000 User Manual
Installing Your Interface Procedures
The interface procedures should be written in SPL and must be loaded into an SL.
For all users to have access to them, they must be loaded into the System SL
(SL.Pub.Sys). If only the users of one account are to access them, they can be
installed in the account SL (SL.Pub.account). Assuming that the routines are in a
source file called Qhooks.Source.User, and that the segment name assigned to these
routines is QUSER, these are the commands to install or update the routines in the
System SL:
:hello manager.sys
:spl qhooks.source.user
:segmenter
-sl sl
-usl $oldpass
-purgesl segment,quser
-addsl quser
-exit
{only required for update}
When the Interface configuration command is read from the Qeditmgr file, the
interface routines are linked to Qedit by calling the LOADPROC intrinsic.
Alternate Activation
To allow more flexibility in the use of interface routines and to reduce the system
overhead (three calls to LOADPROC take a considerable time), Qedit provides an
alternate method for activating interface routines. This method requires only one call
to LOADPROC, and also allows you to disable and enable each interface routine
dynamically, or even switch interface routines.
This alternate method uses three communication words beyond the end of the
PROCSPACE. The 3rd, 4th and 5th words after the PROCSPACE contain the
"plabels" for the Qedit interface procedures. When the "plabel" word is a binary
zero, the interface routine is disabled. When it is nonzero, the routine is enabled and
the word is used to do a "PCAL 0" to that routine.
The global space for user PROCEDUREs and Interface routines is laid out as follows
(remember, FORTRAN tables start at 1, SPL at 0):
SPL references
Contains
FORTRAN references
procspace(-10:-1)
the Userspace
userspace(1) to (10)
procspace(0) to (19)
the Procspace
procspace(1) to (20)
procspace(20)
words of DL
procspace(21)
procspace(21)
"language"
procspace(22)
procspace(22)
plabel of Add
procspace(23)
procspace(23)
plabel of Com
procspace(24)
procspace(24)
plabel of Exit
procspace(25)
procspace(25)
plabel of Mod
procspace(26)
procspace(26)
flags
procspace(27)
procspace(27)
split index
procspace(28)
Because the four "plabel" words are accessible to a user PROCEDURE, as well as to
the Init interface routine, it is possible for one routine to enable all three interface
routines. This is done by including in the source code of the procedure at least one
"dummy" reference to each routine (e.g., procspace(23) := @int'command in SPL).
Qedit 5.9 for HP e3000 User Manual
User Routines • 313
This dummy reference forces MPE to load the procedure at the same time that it
loads the first routine.
With this approach, it is possible for the names of the interface routines to be
arbitrary. In fact, you can have several sets of interface routines and switch them
dynamically. Here is an extract from an SPL procedure to show how to define the
interface routine and then link it to Qedit:
procedure example'command
(string,length,userspace,procspace);
byte array string;
integer length;
array userspace,procspace;
option external;
procspace(23) := @example'command;
The Modify User Hook
Qedit provides a user exit for the Modify commands. To activate this hook, your
interface routine or PROCEDURE must store the "plabel" of your modify routine in
word 25 of the PROCSPACE (word 26 in FORTRAN). Qedit then sends all Modify
operations to this PROCEDURE, which must be structured exactly like a procedure
to be called with the Proc command. (See Writing a User Procedure.) To disable the
Modify hook, replace the "plabel" word with a zero.
The Set Modify Qzmodify command of Qedit makes use of this user exit to replace
the standard Qedit modify routine with a "visual" modify routine.
Writing a User Procedure
Procedures to be called by the Proc command must be written in SPL or FORTRAN
and have the following header structure:
logical procedure name
(linebuffer,
linelength,
linenumber,
procspace);
byte array linebuffer, <>
linenumber;
array procspace;
integer linelength;
option external;
The parameters are defined as follows:
LINEBUFFER: A character array containing the data of a line, left-justified. If the
line is to be modified, the procedure must return the new line data in this buffer.
There is room in LINEBUFFER for an extra stop character if you need it.
LINELENGTH: An integer simple variable containing the length of the line in bytes.
If the procedure changes the length of the line, it must update this variable. If the
new length is greater than the size allowed, Qedit truncates the length. If the value
returned is less than 0 and the procedure returns a "true" result, but not 111, Qedit
deletes the line.
LINENUMBER: A byte array containing the line number in 10 ASCII characters,
display format. This field must not be changed by the procedure. If invoked to
modify a command line, LINENUMBER is set to "COMMAND".
314 • User Routines
Qedit 5.9 for HP e3000 User Manual
PROCSPACE: A global array of 28 words that remains the same between calls to
procedures. The first 20 words of PROCSPACE are reserved for user code and are
initialized to binary zero; they can be reset to zero by using PQ (example: PQ
M,S,510). Individual words in the workspace can be changed with the Proc
command itself (see below). For the meaning of the other 8 words of PROCSPACE
and for access to the 10-word USERSPACE array, see User Interface Procedures.
The procedure must return a "true" (-1) or "false" (0) result in its name, since it is a
function. If the procedure returns "false", the Proc command stops, even though the
rangelist may not be done, and the line is not updated. Only the first LINELENGTH
bytes of LINEBUFFER are guaranteed to have meaningful characters in them,
although the buffer is actually 257 bytes long. If the result is 111 (true), Qedit
continues processing the rangelist, but does not update the current line; this can save
considerable overhead in scanning procedures.
See FINDJUNK and NEATER in Routines.Qlibsrc.Robelle.
DL Space
Some user procedures have been written that use the DL-DB area of the editor stack
for storage. The contributed "ALTER" procedure is an example. HP Editor does not
use this area, but Qedit does. To reserve DB-132 to DB-1 for procedures, use Set DL
before any Proc commands.
Passing Procspace Values
The terminal user can explicitly set the first 20 words of PROCSPACE in the Proc
command itself. This is done by including a list of integer word values in parentheses
in the Proc command. Values are assigned consecutively to the workspace, starting
with the first word. Individual words can be left unchanged by including consecutive
commas in the parameter list. For example, to change the first word to octal 23 and
the third to -59, enter this command:
/P XXX(%23,,-59) 5/10
If the procedure name is left out, the parameter list must occur before the rangelist.
For example:
/P (5,0,73,2,,-2) 5/10
If the procedure uses any of the MPE "trap" intrinsics (XCONTRAP, XSYSTRAP,
etc.), it must reset the original traps before returning to Qedit.
PROC procedures can also be substituted for the standard Qedit Modify routine. See
User Interface Procedures.
To load the procedure without actually calling it, as you might want to do in the
Qeditmgr file, use the PJ command. This also suppresses the error message, if the
procedure cannot be found!
Communication Flags for User Code
Qedit also provides the user interface and PROC routines with the the following
powerful control capabilities:
Qedit 5.9 for HP e3000 User Manual
User Routines • 315
•
Control can pass between PROC routines and user command interfaces
without a user prompt by Qedit.
•
PROC routines can request that Qedit add a new line after the current
line.
•
PROC routines can divide a single line into two lines.
•
PROC routines can splice two lines into a single line.
These capabilities are provided through a "flags" word appended to the
PROCSPACE. This word contains flags for requesting special actions and status
replies from Qedit. The flags word is located at PROCSPACE(26) in SPL
(PROCSPACE(27) in FORTRAN).
The bits are defined as:
Bit 15: No-prompt-flag. Command input must be provided totally by the User
Command-interface routine. "/" is not printed.
Bit 14: Add-line-flag. PROC requests that Qedit create a new blank line immediately
following the current line. Control returns to the PROC routine after the add, with
the original line.
Bit 13: Add-failed-flag. On the next call to PROC following an "add-line" request,
this bit will be turned on if the add failed due to insufficient line numbers.
Bit 12: Restart-line-flag. If you return from a user PROC with this bit set and you
return TRUE as the result and not Control-Y, Qedit resets your data buffer to the
original contents of the line and calls you again.
Split: If you turn on the add-line-bit and use the "split index" word,
PROCSPACE(27) in SPL or PROCSPACE(28) in FORTRAN, you can emulate the
function of Control-V in Modify. The value of "split index" defaults to -1, which
causes Qedit to create a blank new line (ordinary add-line). Or you can specify how
many bytes of the current buffer to retain for the current line and how many to
transfer to the new line. Split index equal to zero will move all of the data buffer to
the new line and leave the data buffer with length = 0. Split index greater than zero
retains the first "split index" bytes in the current and moves the remainder to the next
line. The current line is not updated by add-line. Therefore, you can use the restartbit to recall the previous contents. After an add-line, the PROC routine is still called
with the current line, then with the new line.
Bit 11: Splice-line bit. PROC routines may splice the next line to the current line by
setting bit 11 to 1, then returning with a TRUE result and LEN set to the true length
of their data buffer. Qedit performs the splice function AND updates the current line,
then calls the PROC routine for that line again.
Bit 10: Extended-ASCII bit. Qedit turns this bit on when the user has done Set
Editinput Extend ON. This indicates that the user would like to be able to use the
Roman-8 extensions to the ASCII character set (codes 161 through 254).
316 • User Routines
Qedit 5.9 for HP e3000 User Manual
Qcopy
Introduction
Qcopy is a contributed program that reads and writes Qedit files. Qedit files exist in
a special compressed format which can only be read by Qedit or software such as
Qcopy that has been modified to read them. Qcopy is used to convert files to and
from Qedit's special format.
Along with Qcopy we provide a stand-alone routine named Qeditaccess that provides
the actual decoding of Qedit files. You may merge this routine into your own
programs if you wish. The code is available in both compatibility-mode and nativemode formats.
Qcopy is also used to recover Qedit files that have been corrupted. While this
happens rarely, Qcopy is the only program which can recover the lines of a Qedit
file.
Qcopy is part of the Robelle QLIB, a set of contributed tools included with Robelle
software at no extra charge. You may use Qcopy, even if you are not licensed to use
Qedit.
Accessing Qcopy
Run Qcopy using the following command:
:run qcopy.qlib.robelle
Qcopy syntax is similar to the MPE FCOPY utility. You specify a FROM file and a
TO file, and some options.
>from=xyz.src
>from=xyz.src;to=
>from=xyz.src;to=abc.doc
>from=xyz.src;to=abc.doc;new
>from=xyz.src;to=abc.doc;qedit
>from=@.me;to=@.you
{copy file to itself}
{print on $stdlist}
{copy to an existing file}
{create a new editor file}
{make new qedit file}
{copy a group of files}
Qcopy Documentation
You can print the Qcopy User Manual easily using the Printdoc program; you simply
answer questions about which printer you have.
Qedit 5.9 for HP e3000 User Manual
Qcopy • 317
:run printdoc.pub.robelle;info="qcopy.qlibdoc.robelle"
318 • Qcopy
Qedit 5.9 for HP e3000 User Manual
Qedit-Compatible Software Tools
Introduction
The MPE software tools listed here are compatible with Qedit files. These tools
either have Qedit "hooks" built in, or they can be "Qedified" as explained in the
chapter on Installation at the end of this manual. So far, there are no HP-UX software
tools that are compatible with Qedit.
Note re Jumbo Files: Not all these tools are able to read the files of language Data.
They will probably see them as empty files. Contact us or the vendor for details.
Compare/iX
Compare/iX is a Bonus program that is provided with Qedit for use only by Robelle
customers. This program compares two text files (Keep or Qedit format) and prints
out the differences. The basic comparison unit is a line. Compare/iX identifies three
types of differences: lines that are in the first file but not in the second; lines that are
in the second file but not in the first; and lines that are in both files, but don't match.
There is no Classic version of Compare/iX for MPE V.
We provide a UDC which makes it easy to access Compare. The Outfile parameter is
optional and defaults to $stdlist. The Info parameter is also optional, and it defaults
to a null string. To see all the program options, use info="?".
/set udc
/Compare
/Compare
/Compare
/Compare
compudc.catalog.robelle
myfile, yourfile,,?
myfile, yourfile
myfile, yourfile, *lp, L2
myfile, yourfile,,"L2 J+"
The job stream Bonus.Job.Robelle installs all Robelle Bonus programs, including
Compare/iX. The file Compare.Doc.Robelle is the user manual, which you can print
with our Printdoc program:
:run printdoc.pub.robelle;info="compare.doc.robelle"
OMNIDEX
OMNIDEX is a product from Dynamic Information Systems Corporation that adds
keyword and indexed sequential access to IMAGE and Turbo IMAGE. It has an
option to do keyword retrieval on text files, including Qedit files. You record the
Qedit 5.9 for HP e3000 User Manual
Qedit-Compatible Software Tools • 319
names of the files in the OMNIDEX database and it keeps track of what keywords
occur in what files. Given some keyword criteria, OMNIDEX shows the files that
qualify, then gives you the option of viewing those files. For more information, call
D.I.S.C. at (303) 444-4000.
Adager
Adager is a database restructuring tool for TurboImage and TurboImage/iX. Adager
will read and write schema files that are in Qedit format. For more information, call
1-800-LDD-REGO (533-7346).
CCS - Corporate Computer Systems
CCS has several products for the HP3000 that can be used with Qedit. Their
compatibility-mode C compiler can be Qedified to read Qedit files (see the
instructions in the installation chapter of this manual). Their native-mode C/iX
compiler will read Qedit files if you fix the C command file to reference Qedit's
compiler library "Qcompxl". CCS reports that their newest C compilers have a -Q
option to create an error file that is compatible with Qedit's :Editerror command.
CCS also sells a COBOL symbolic debugger for MPE V which is compatible with
Qedit. For more information, call (908) 946-3800.
Reflection
Reflection is the most widely used PC emulator of HP terminals. They have several
models for DOS, Windows and Macintosh. The file transfer function in Reflection
can read and write Qedit files. And, when you download a Qedit file to the PC,
Reflection keeps track of what "language" it is, so that when you upload it later it
will still be, say, a "COBOL" file. For more information, contact Walker Richer &
Quinn at (206) 217-7500, (800) 872-2829.
ROBOT
ROBOT/3000, an automatic documenter package, supports Qedit files. It will crossreference elements of your application, including sets, items, programs, and jobs,
that reside in Qedit workfiles (COBOL, FORTRAN, Pascal, JOB, SPL, etc.).
ROBOT has many other functions, such as auditing which files have been changed
and when, and seems to add new ones regularly (e.g., cross-reference PowerHouse
and Rapid modules). For more information, contact Productive Software Systems
Inc., (612) 831-8866 or (800) 726-4099.
PowerHouse
PowerHouse is a popular fourth generation language from Cognos Corporation.
PowerHouse has a number of components, only a few of which are described here:
QDD, a data dictionary; QUICK, an on-line transaction processor; QTP, a batch
transaction processor; and QUIZ, a report writer. They all employ nonprocedural
languages that should speed development and reduce maintenance. All modules of
PowerHouse will read Qedit files (original format) where appropriate, including the
native-mode versions on MPE/iX. For more information in the United States, call
320 • Qedit-Compatible Software Tools
Qedit 5.9 for HP e3000 User Manual
(800) 4-COGNOS; in Canada, call (613) 738-1440 or (800) 267-2777; and in
Europe, call U.K. (0344) 486668.
Splash for Native-Mode SPL
The Splash compiler from Allegro Consultants is a native-mode compiler for the
SPL/3000 language. Not only does it read Qedit source files, but it will generate an
error file that is compatible with the :Editerror command in Qedit. For information,
call (408) 252-2330.
Prose Text Formatter
Prose is a text formatter that is compatible with Qedit. Prose is suitable for many text
processing tasks; we use it for most Robelle documents. For sample documents that
contain Prose "commands", see the file Prose.Qlibdoc.Robelle or
HowMessy.Doc.Robelle. Prose is in the Qlib for use by anyone.
Spell: Spelling Checker
Spell is a spelling checker that will read a file and produce a list of misspelled words.
Spell comes with an 80,000 word English dictionary, and you can add your own
words into global or local auxiliary dictionaries. Spell will read Qedit files, and it has
an option to generate an error file that is compatible with Qedit's :Editerror
command. Spell is a Bonus program from Robelle included with Qedit for use by
Robelle customers.
Qhelp Help System
Qhelp is Robelle's interactive Help facility. It works exclusively with Qedit
workfiles. To experiment with Qhelp yourself, do
:run qhelp.qlib.robelle;info="robelle.help.robelle"
Qhelp is built into most Robelle products and is in the Qlib for use by anyone.
TRANSACT
HP's TRANSACT compiler will accept Qedit files for the main source file, but not
"include" files. The standard Qedit installation job will "qedify" TRANCOMP.
TRANSACT $include files are processed correctly when TRANCOMP is invoked
from within Qedit.
MPEX and STREAMX
MPEX/3000 allows you to apply many commands, including Qedit commands, to
file sets such as GL@.SOURCE. MPEX's usefiles and "indirect" file-sets, a file
containing a list of file names, can also be Qedit files. This is also a very useful tool
for managing disc space. MPEX can list all of the files in the system with more than,
say, 2000 sectors of space, showing which devices they are on, etc. MPEX also has
Qedit 5.9 for HP e3000 User Manual
Qedit-Compatible Software Tools • 321
the ability to search a set of files for a string. The files may be Qedit files. The Set
Extprog command of Qedit will integrate MPEX commands into Qedit.
VESOFT has an MPEX %Listf format that is especially useful for Qedit files. It
displays the logical record length, language, number of lines, and the first three lines
of text files, all without changing the access date and time of the files. This new
%LISTF,ID option is available in version 25 of MPEX.
%listf q@,id
MPEX %LISTF q@
PAGE 1
BOB,MGR.ADMIN,PUB
TUE, DEC 6, 2000, 12:34 PM
ACCOUNT=
ADMIN
Filename
--------
Rec
Code
Size Type EOF Sect Identification
----- ----- ---- --- ----- -----------------------
QJUMBO
QEDIT+ 256B DATA
3
QJUMBO2
QEDIT+
32B TEXT
3
80B FA
9
QKEEP
QORIG
QEDIT
GROUP
TOTAL:
GROUP=
72B SPL
4 FILES
PUB
68
16 Welcome to Qedit, Robel
:run qedit.pub.robell
16 this is a Jumbo file
that has very short
lines
16 !job testjob,bob.admin/
!comment
!comment
16 subroutine setup'worksp
value
version;
logical version;
64 SECTORS
STREAMX allows you to keep job streams on the system without passwords.
STREAMX will supply the necessary passwords, and lets you write smart job
streams with its job stream programming language. The job streams can be Qedit
files. Warning: Qedit permits comments on command lines using the characters {
and }. If you use this feature, you may need to alter your STREAMX character set.
MPEX/3000 and STREAMX/3000 are products of VESOFT Inc., (310) 282-0420.
SCOMPARE and ANALYZER
SCOMPARE takes two source files and tells you their differences. ANALYZER
tests and measures COBOL programs. Both products accept Qedit files as input.
These products can be obtained from the Aldon Computer Group, 1-800-825-5858,
or (510) 839-3535.
Xpedit Full-Screen Editor
Xpedit can be used by anyone who needs a quick, simple-to-operate full-screen
editor for editing small application data files. Xpedit can read and write Qedit files,
in addition to regular files. Xpedit is a bonus program for use by Robelle customers.
For more information, contact Robelle Solutions Technology Inc.
Nuggets
Lund Performance Solutions sells a collections of utilities for MPE/iX systems called
Nuggets. One of the utilities in the Nuggets Emerald collection is Magnet, which is
322 • Qedit-Compatible Software Tools
Qedit 5.9 for HP e3000 User Manual
very, very fast at finding strings in files, including Qedit files. For information on
Nuggets, contact Lund Performance Solutions, (503) 926-3800.
Fantasia
Fantasia lets you produce typeset quality documents on the HP3000 for printing on
LaserJet and series 5000 laser printers. Fantasia can read Qedit files. Contact
Proactive Systems at 1-800-321-4531.
TDP
TDP is HP's text and document processor. Although is does not support Qedit files
and cannot be "Qedified", you can use the TDP formatter with Qedit. Qedit has two
commands, :Tdpfinal and :Tdpdraft, that invoke TDP to format a Qedit file. Look
under those commands for more information, or type /help tdp.
Network Engine
The Network Engine is a communications product that allows you to set up script
files, similar in concept to Reflection command files. These script files may be Qedit
files or regular editor files. Also, Network can be used effectively in a processhandling environment like Qedit. Running Network from Qedit, you can initiate a
file transfer, then go back to Qedit while the transfer is happening in the background.
For more information, contact Telamon at (916) 622-0630.
Qedit 5.9 for HP e3000 User Manual
Qedit-Compatible Software Tools • 323
Regular Expressions
Introduction
Regular expressions might look like wildcards used in the Pattern search option.
Regular expressions are sometimes compared to wildcards but, in fact, they are much
more powerful and can be much more complex. You have to practice in order to use
them efficiently and to their full potential. For brevity, we will often refer to regular
expressions simply as regexp.
In Qedit's line-mode, you can use regular expression in most places where you can
use a string or pattern. In fact, you specify regular expressions in Qedit similar to the
way you specify patterns, by specifying the "regexp" keyword in a window:
/list "Robel+e"(regexp) {Robelle or Robele}
/change "[rR]obel+e?"(reg) "ROBELLE" {robell Robele...}
Although all regexp implementations share a basic set of metacharacters and syntax
rules, other tools and programs might have different extensions and variations than
Qedit. For example, the alternation metacharacter "|" (equivalent to an "or" function)
is not provided in Qedit. As the first implementation of regular expressions in
Robelle products, this version of Qedit might not have all the extensions you are
currently familiar with. We will be looking at other tools as we explore the
possibility of extending our own implementation in future releases.
If you are interested in learning more about regular expressions, you should get a
copy of Mastering Regular Expressions written by Jeffrey E. F. Friedl and published
at O'Reilly & Associates, Inc. This book covers most regular expression
implementations, the differences between each one, how most regexp engines work
and some tips on how to get the best performance from each type.
Metacharacters
Qedit supports the following metacharacters:
^
Start-of-line anchor
$
End-of-line anchor
.
Matches any character
?
Optional character
*
Matches zero or more of the preceding character
Qedit 5.9 for HP e3000 User Manual
Regular Expressions • 325
+
Matches one or more of the preceding character
[
Start a character class
]
End a character class
^
If first character in character class, negate class
(
Subpattern start
)
Subpattern end
Anchor Characters.
In general, a regexp can find a match anywhere in the text as long as it appears on a
single line. There are two exceptions to this rule. The start-of-line (^) and the end-ofline ($) anchors. They are called anchors for very good reasons. These anchors
actually indicate that the match must occur at fixed positions within the line.
The start-of-line anchor specifies that the string must appear at the very beginning of
the line. If you enter
^abc
the line will be selected only if the string "abc" is the first thing on the line. Thus,
abcdefghij
xyzabc
{will be selected}
{will not be selected}
Similarly, the end-of-line anchor specifies that the string must appear as the last
thing on the line. In this example,
abc$
the lines must end with the string "abc." There must not be anything else after it, not
even spaces.
abcdef
xyzabc
{will not be selected}
{will be selected}
You can combine the anchors to verify that lines contain only a certain string and
nothing else. Simply use
^abc$
Every line has a start and an end anchor. If you search for the start or the end anchor
(^ or $) by itself, Qedit matches all the lines in the file.
TIP: If you edit your file in full-screen mode with Set Visual Home Off, searching
for the start-of-line anchor moves to the next line and puts the cursor at the first
position. If you search for the end-of-line anchor, Qedit goes to the next line and puts
the cursor after the last character on the line (if the last character is visible).
If the anchor characters are used anywhere else, they lose their metacharacter status
and become ordinary characters.
Match Any Character.
The period, or dot, is used to match any character. The character can be of any type.
As long as there is something in that position, there will be a match. For example,
abc.xyz
selects any line that contains the strings "abc" and "xyz" separated by a single
character. That character can be anything (e.g., 1, w, #, etc).
Optional Character.
326 • Regular Expressions
Qedit 5.9 for HP e3000 User Manual
You can check the absence or presence of a character by following it with a question
mark (?). In a regexp, the question mark indicates that the preceding character is
optional. If it is present, it must appear only once.
ab?c
{matches only "ac" and "abc"}
Repeating Characters.
There are different ways you can check for the repetition of characters. If there is
potential for a character to appear more than once, you can use the asterisk (*) or the
plus sign (+) quantifier. These quantifiers are applied only to the character to their
immediate left.
There is a very small difference between the two quantifiers. The asterisk represents
zero or more occurrences of the preceding character. In other words, the character is
optional, but, if it is there, it can appear multiple times. The plus sign represents one
or more occurrences. This means the character must appear at least once, but it can
appear multiple times.
ab*c
ab+c
{matches "ac," "abc," "abbc," etc.}
{matches "abc," "abbc," but not "ac"}
Character Class
When you have to check for a fixed string of characters, it is easy enough to simply
type it at the actual regexp. Entering "abc123" will only find exact matches. What if
you want to find the string "abc" followed by a numeric digit? There are no specific
metacharacters for digits or alphabetic characters. However, regular expressions have
a concept called character class to address these issues. Actually, character class is a
lot more powerful and flexible than metacharacters for specific types of text.
A character class is enclosed between brackets. The closing bracket can be left out.
However, it is good practice to code it explicitly to avoid ambiguity.
Note that most regexp metacharacters listed above lose their meaning inside a
character class. The start-of-line anchor acquires a different definition and a new
metacharacter, hyphen (-), appears.
A character class is a list of possible values for a specific position in the string. The
character class can be as long as needed. A character class for numeric digits would
be
[0123456789]
Note, the list does not have to be in sorted order. You could have entered the digits in
reverse order or in random order and the character class would still be valid. It is just
harder to verify that all digits are included. Similarly, a character class for lowercase
letters would be
[abcdefghijklmnopqrstuvwxyz]
It is really important to understand that a match occurs if one of the characters in the
class is found. Using the "abc" example above, if we want to find this string followed
by a digit, we would enter
abc[0123456789]
{matches "abc0", "abc1", etc.
to "abc9"}
To further restrict the search, we could have used
Qedit 5.9 for HP e3000 User Manual
Regular Expressions • 327
abc[13579]
{matches "abc" followed by one odd digit}
Because a character class is only a list of possible values, you can mix and match all
the characters in the ASCII code table.
p[imy246!.*]e
{matches "pie," "pme," "p4e," "p*e," etc.}
This example would find text starting with the letter p and ending with an e that
encloses a single character matching one of the letters a, m or y, one of the digits 2, 4
or 6, an exclamation mark (!), a period (.) or an asterisk (*). Note the period and
asterisk are not metacharacters anymore.
Of course, if the character class contains many possible values, it can be tedious and
error-prone to enter each character. The hyphen is a character-class metacharacter
that can be used as a range indicator. Simply specify the first and last characters in
the range. Numeric digits could then be coded as [0-9]. Lowercase letters could be
coded as [a-z]. You can also combine ranges with single values, as in
abc[0-9a-z!.*]
A character class range is based on the ASCII character set. You could specify a
range of
[A-z]
and it would be perfectly valid. In this case, the range would include all uppercase
letters, a series of special characters ([,\,],^,_,`) and all lowercase letters. Typically,
you would enter the character with the smallest ASCII value as the lower limit and
the character with the largest value as the upper limit. Qedit accepts characters even
if they are reversed (i.e., the largest value first) as in:
[Z-A]
Qedit detects this situation and swaps the values internally so [a-z] and [z-a] are
really equivalent. To avoid ambiguity, it is recommended that you use the first
format.
The hyphen is interpreted as a range indicator only if it is at a logical place between
two other characters. If it is somewhere else in the class, it is used at face value.
[-a-z]
[a-z-]
[a-z-9]
[a-z0-9]
{hyphen and lowercase letters}
{lowercase letters and hyphen}
{lowercase letters, hyphen and digit 9}
{lowercase letters and digits 0 to 9}
Negated Character Class.
The caret (^) takes on a different meaning inside a character class. It is used at face
value anywhere in the class, except if it is the first character in which case the caret
negates the whole class. This means a match is found if the text does not contain any
of the characters in the class.
p[246^]e
p[^246]e
{matches "p2e", "p^e", etc.}
{matches "pae", "p3e", etc.}
In the last example, the caret negates 2, 4 and 6. The regexp is true if the text starts
with the letter p, ends with the letter e and encloses a single character that is not 2, 4
or 6.
Repeating Character Class.
Because a character class is interpreted as a single character, you can use the optional
(?) and quantifier (* and +) metacharacters to further qualify a character class. For
example, if we want to allow one or more numeric digits after the "abc" string, we
could use the following regexp:
328 • Regular Expressions
Qedit 5.9 for HP e3000 User Manual
abc[0-9]+
Escape Character
Other characters used in a regular expression might also have special meanings. The
most important one is probably the escape character. In Qedit, the backslash is the
escape character. A metacharacter, however, loses its special meaning if preceded by
a backslash. In the example,
abc[123]
square brackets indicate a character class. This regexp would match "abc1," "abc2"
or "abc3." If we escape the square brackets as in
abc\[123\]
the square brackets are then used as literals. This means they are now part of the
string. The only matching value is then "abc[123]."
If you want to search for a backslash, simply enter two of them in a row (\\). The
only exception to this is the start-of-line metacharacter. Because it (^) is also a valid
escaped sequence (see next section), there is no way to tell Qedit to search for the
caret as a literal. You should use an expression with the corresponding hexadecimal
value.
x05e
Escaped Sequences in Regular Expressions
The escape character can be combined with other characters to represent nonprinting
characters. Qedit recognizes the following escaped characters: (These should not be
confused with escape sequences that control the display on HP-type terminals. They
are also not metacharacters.)
\b
Backspace
\e
ASCII escape character (ESC)
\f
Form feed
\n
New line (line feed)
\r
Carriage return
\s
Space
\t
Horizontal tab
\DDD
1-3 octal digits representing a character's ASCII value
\xDDD
1-3 hex digits representing a character's ASCII value
\^C
Control code (e.g., Control-G (^G) is the Bell character)
For example, you would use:
\t
\e&d@&
{all lines with a tab character}
{terminal escape sequence ESC&d@}
Escaped characters can be used anywhere an ordinary character is used, including a
character class and to declare a character range.
Qedit 5.9 for HP e3000 User Manual
Regular Expressions • 329
Backreferences in Regular Expressions
We have seen basic expressions in which almost everything revolves around single
characters of text. Even character class lists are really used to match a single
position.
You can use parentheses to divide a long regular expression into smaller portions.
Each portion then becomes a regexp on its own. This does not affect the way a string
search is done. However, each subpattern can then be used in a replacement
operation.
Subpatterns are numbered from 0 to 9. Subpattern 0 is reserved and represents the
complete matched string. Note that subpattern 0 is implicit and is always available,
even if the expression does not contain parentheses. Explicit subpatterns are
numbered from 1 to 9, starting from the left of the expression.
Subpatterns can be referenced in a replacement regexp by using the escape character,
a backslash, followed by the subpattern number. When applying the replacement
string, backreferences are substituted with the actual matching text. Backreferences
can be used as many times as needed. Each reference ends up with the original text.
Let's say we have a file that contains a series of phone numbers. In North America
(and possibly other countries), phone numbers contain a 3-digit area code followed
by a 3-digit exchange number and, finally, a 4-digit individual number.
Unfortunately, in our case, the phone numbers are just series of 10 numeric digits
without separators. For example,
1234567890
1112224444
9087374456
We would like a fast and easy way to format them so that the numbers are easier to
read. To find all these strings, we can use the following regexp:
([0-9][0-9][0-9])([0-9][0-9][0-9])([0-9][0-9][0-9][0-9])
We use the [0-9] character class to specify that we are expecting only numeric digits.
In this example there are three subpatterns in the regexp. Each subpattern is enclosed
in a set of parentheses.
The first subpattern (\1) repeats the numeric character class 3 times. It represents the
digits in the area code. The second subpattern (\2) also has the character class
repeated 3 times. It represents the exchange number. The third and last subpattern
(\3) repeats the character class 4 times. It represents the individual number.
Subpattern \0 represents all 10 digits.
To reformat this information, we can now combine backreferences with other
characters to arrange the numbers any way we like. Let's say we want to put the area
code in parentheses, insert a space after it and insert a dash (-) between the exchange
number and the individual number. We would use the following substitution string:
(\1) \2-\3
The list would appear as follows:
(123) 456-7890
(111) 222-4444
(908) 737-4456
You can use subexpressions to reorder the text in lines. For example, if we want to
reverse the telephone numbers (show the last four digits first, then the first three
digits of the telephone number, followed by the area code), we could use
330 • Regular Expressions
Qedit 5.9 for HP e3000 User Manual
Last: \3 Middle: \2 Area: \1 Complete: \0
This substitution string produces the following list (assuming that we started with the
same data in this example and used the same regexp):
Last: 7890 Middle: 456 Area: 123 Complete: 1234567890
Last: 4444 Middle: 222 Area: 111 Complete: 1112224444
Last: 4456 Middle: 737 Area: 908 Complete: 9087374456
Escaped Characters in Replacement String
Escaped sequences can also be used in the replacement string of a Change command,
making it easier to insert special characters.
All escaped sequences are valid in the replacement, except for octal values (these are
coded using octal digits). For example, "\007" can be used to represent the bell
character. However, backreferences in the replacement string are represented by \n,
where n is a digit from 0 to 9. Because of that, \007 might be interpreted as
backreference \0 followed by the literal 07 (bell character).
To work around this limitation, a backslash followed by a digit in a replacement
string is always assumed to be a backreference. To specify special characters using
numeric values, you should use hexadecimal notation (e.g., \x007).
Qedit Glossary
Introduction
Certain symbols and terms are common to many Qedit commands. They are defined
here, in alphabetical order.
The slots for variables within the command definitions are highlighted in the text.
You replace these variable fields with your real-life item. For instance, the syntax for
the Use command is "Use filename". You replace the term filename with any valid
filename. For example,
/use qedseg.job
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 331
Terms
Abbreviating
You can abbreviate many Qedit commands. You can shorten command names, for
example, to a single letter, unless more than one command starts with the same letter.
If that's so, enter enough of the command name to distinguish it. The reserved words
First, Last, and All can be replaced by [, ] and @ in Qedit commands. Sometimes
you can even dispense with the command completely: /? means help, /\ means back
one line, /55 means go to line 55, /"string" means find this string, /^"string" means
search backwards for this string, and a simple Return means go ahead one line.
Batch
Although Qedit is primarily designed for interactive editing, all commands except
Visual can be used in a batch :JOB. There are two differences in operation:
An error causes Qedit to terminate in batch mode, but only skips the current
command line in session mode;
Where a "Yes-or-No" question is asked in session mode (e.g., "Clear?"), the question
is printed with an implicit "Yes" answer in batch mode (e.g., "Clear? Yes").
In both session and batch, a "warning" message is nonfatal. Set Autocont ON causes
errors to be nonfatal in batch mode. New work lines can be Added in batch, but
because Control-Y cannot be used, the Add should be ended with "//".
Calculator
Qedit will treat any command that begins with an equal sign ("=") as an expression
to be evaluated. To add two numbers together:
=125+512
Result= 637.0
An expression consists of numbers and operators. The operators can be addition (+),
subtraction (-), multiplication (*), division (/), or exponentiation (**). The value of
the expression is printed immediately.
For a complete description of calculator, type help calc.
Column
Individual character positions within lines are called columns and have column
numbers. See template for a method of drawing a column template above any line.
Column numbers are referenced in the Change command and string windows. For
example:
/change 1/4 "" 23 {delete first 4 columns in line 23}
/change 1 " " 4/9 {insert 2 columns at front}
/l "begin"(1/10) {find "begin" in first 10 columns}
A column is an integer number between the lowest column of the line and the highest
column. The lowest column number is 7 for standard COBOL, and 1 for SPL,
FORTRAN, Pascal, RPG, Text, COBFREE, Data and Job files. The highest column
332 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
number is 72 for standard COBOL, SPL, Pascal and FORTRAN files, 256 for
COBFREE, 256 for TEXT, 80 for COBOLX, RPG and Job files, and 8,172 for Data
files. When in doubt as to column numbers, use LT to list a line with column
headings. Shorthand: (1) = (1/1), ([/30) = (first column/30), (30/]) = (30/last column).
Using Set Left column and Set Right column, you can set margins in specific
columns. Any existing data beyond the margins is retained, but new lines added will
have blanks outside the margins.
Command
Qedit accepts two basic types of commands: those such as Add, Change and Text
that can be combined on a line using semicolon to separate them; and those such as
File and Listf which can only appear once on a command line because semicolon is
reserved for separating parameters.
/text abc;modify 5 {two Qedit commands}
/file abc;rec=-56;disc=10 {one MPE command}
/new abc;listf abc {Qedit and mpe command}
We call the first style "qedit" commands and the second style "mpe" commands,
although they are all equally Qedit commands. With the first style, the command
name can usually be abbreviated to one letter (Add is A), although some commands
require several letters (Findu for Findup). With the "mpe" style, the command name
must usually be spelled out completely (e.g., Listf), although some commands do
have short forms (Seg for Segmenter, the F7 key for Listredo).
/vi {"vi" means Visual}
/c "abc"xxx" all {"c" means Change}
/run $oldpass;maxdata=1000
/ru ;m 10000 {short form okay in Qedit}
Because the syntax rules vary for these two styles of commands, we show the "mpe"
commands in the manual with a colon (:). This does not mean that you need to type a
colon with those commands - Qedit will recognize 99% of them without a colon (as
long as there is not a "qedit" command with the same name!)
Control Character
You create a control character by holding down the Control key while you strike
another key. Control plus "A" generates Control-A. These are normally nonprinting
characters, but they may do things to your terminal. For example, Control-G rings
the bell. Qedit uses control characters for a number of purposes:
In Modify, control characters specify the edit functions: Control-D for delete,
Control-B for before, etc.
Control-Y stops execution of the current Qedit command.
Control-H causes the cursor to backspace one position in the current line.
Control-I skips to the next tab position.
Control-X cancels the current input line.
Control-S pauses a listing that is printing too fast for you to read.
Control-Q resumes a listing that you have paused with Control-S.
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 333
Editing control characters can be tricky. If you use Set Editinput to clean your text of
line "noise", Qedit will not let you enter control characters in Add or Replace. If you
use Modify, it treats all control characters as edit functions. If you use Visual, the
block-mode terminal strips all control characters from the text. There are three things
that you can do: 1) use Set Decimal ON and insert control characters using Change
"$" '26, 2) use Set Editinput Data OFF and enter them using Display Functions in
Add and Replace, and 3) use Set Mod Qzmod and insert them using Control-W,
Control-P (put).
Copylib Members
COBOL allows you to maintain libraries of common code and data called
"copylibs". Each library consists of several members, each with an eight-character
name. You use HP's Cobedit program to create the Copylib file but you can use
Qedit to list copylib member names, and to Text, Keep, List and Destroy Copylib
members. Wherever you may type a filename in Qedit, just substitute a member
name in parentheses, optionally followed by the name of the Copylib file (default =
"copylib" for which you usually have a :File command).
/file copylib=copylib.pub.develop
/list (custrec)
/text (custrec) {looks in Copylib}
/keep {same member, same file}
/keep (custrec2) {new member, same file}
/keep (custrec) copylib2 {same member, different file}
CRT
CRT (Cathode Ray Tube) is a generic term used to refer to the terminal. It refers
equally to "real" HP terminals, clones of HP terminals made by other companies, and
PCs that run terminal emulation software.
Current Line
The current line is the line you last accessed. You can refer to it using the special
character "*" instead of a linenum. For most commands, * is also the default
rangelist. For example, VIS sends you into full-screen mode around the current line.
Defaults
When Qedit asks you a question, it puts the "default" answer in brackets (e.g., Purge
file? [no] ). The default is usually the option that would do the least harm to your
file. That is, "do not complete the task", "do not erase the file", or "do not upshift the
line". If you press Return to the question, Qedit will take the default. In batch
processing, there is no one available to answer the question, so Qedit must decide on
the proper answer for you. Qedit assumes that you want your batch task to complete,
so it always selects the option that will complete the command successfully. That is,
"do clear the file", or "do upshift the line".
334 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
External File
Although you can only edit the workfile that is currently Open, Qedit accesses files
for other purposes than editing. Qedit accepts commands and lines of text from
$stdinx. Qedit prints lines and messages on $stdlist. The List and Verify commands
allow output to be directed to an external file named LP that defaults to the LP
device: List LP ALL; Verify LP.
Qedit reads external files in the Add, Hold, List, Merge, Text and Use commands:
/add 100.1=tfile {adds lines from "tfile" at line 100.1}
/list tfile {lists the contents of "tfile"}
/text tfile {makes a copy of "tfile"}
/use tfile {executes Qedit commands from "tfile"}
/merge tfile {merge in contents of "tfile"}
/hold sample 1/5 {write lines 1/5 of sample to Hold file}
Qedit recognizes three types of external files:
Other Qedit workfiles.
NUMBERED text files. Each record contains a line number field. The lines are
sorted by the line number. This is the file created by a Keep command. If the record
length is not 80 bytes (or 74 for COBOL), the LANGUAGE is always TEXT.
UNNUMBERED text files. Records with no line number field. These are created by
a KQ command or by Keep file,UNN. If the record size is not standard, the language
is set to TEXT (record <= 256) or DATA (record > 256).
File Names
A filename is any valid MPE file name and is used in Qedit commands to identify a
workfile for editing (Open, New, Text) or an external file to be accessed in some way
(Add, Keep, List, Text and Use). On MPE/iX 5.0, Qedit accepts file names up to 240
characters long, containing underbars (_) and dashes (-). On MPE, a POSIX file
name must be preceded by a period (.) or a slash (/). The following commands all
contain valid file names:
/open qedt3p1.source {open file for editing work}
/add 50.1 = abcd.pub {copy in lines from a file}
/new qedt3p2.source {create a new Qedit workfile}
/keep ktemp.stream {convert workfile to Keep file}
/text #o1234 {see Spool Files}
/text (custrec) {see Copylib Members}
/keep /GREEN/BOB/temp.dot {MPE/iX 5.0 or later}
/text /GREEN/BOB/temp-dash
/list /GREEN/BOB/temp_underbar
/list ./temp-dash {current working directory}
/list ../SRC/lowercs {parent directory}
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 335
File names that include special characters might cause problems to Qedit. For
example,
/Text ./file:name
Error: Extra or invalid character in Text command
If you run into this, you can use the $file keyword instead. The $file keyword can be
used wherever a file name is expected such as in the Text, Add, List commands. The
syntax is:
$file[=]"filename"
$File is a reserved keyword, which is followed by an optional equal sign and the file
name enclosed in string delimiters. Without doing anything to the string, Qedit tries
to open the specified file. The previous example now becomes:
/Text $file="./file:name"
10 lines in file
This means the file name is assumed to be in the POSIX namespace. If you wish to
access files in the MPE namespace, you have to enter the name in uppercase and use
the POSIX notation.
/ACCOUNT/GROUP/FILENAME
Full-Screen Editing
To use the full-screen editor of Qedit, use the Visual command. This feature works
on most HP terminals with block-mode and provides many powerful features,
including navigation while in Visual mode.
Hold File
There are two Hold files. You can explicitly save lines in the file called Hold by
using the Hold command, or HH /HJ in Visual mode. Lines are written to the Hold0
file every time you move or copy with the Add command (MM, CC, and DD in
Visual mode). You can refer to the contents of these files by their file names in any
of the commands that access external files, such as Add-File, List, and Use.
J Option
You may append one or two option letters to a command name: Q, T, or J. For
example, the List command has these options: LQ, LT, LJ, LQJ, and LQT. The J
option specifies left-justified or "jumping" or other options. For example:
/lj {List-Jumping to browse; type N to stop}
/lqj {List-Jumping without sequence numbers}
/cj"*"." {verify each change before updating}
/aj * {add-justified after *; same indentation}
/rj 423 {replace-justified; same indentation}
/hoj 1/9 {append rangelist to end of holdfile}
336 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
Jumbo Files
Introduced in Qedit 4.3, Jumbo files are files in a new Qedit file format. They are
similar in structure to original Qedit files, but Jumbo files can hold lines up to 1,000
characters. In addition, Jumbo files can contain up to 99 million lines.
Starting in Qedit 4.6.57, there is a new workfile format known as Wide-Jumbo.
These expanded Jumbo files can hold lines up to 8,172 characters.
If you pass a Jumbo file to a program that knows about Qedit files but not Jumbo
files, the file will appear to be empty to the program.
Keep File
A Keep file is a disc file that is created by the Keep command of Qedit or
EDIT/3000. See external file. A Keep file cannot be edited per se, because you
cannot insert lines in it. A Qedit workfile is designed to hold the same data as a Keep
file, but more compactly and with the ability to insert lines. Use the Text command
to copy a Keep file into Qedit format.
Language
Qedit works on files of standardized formats called languages. Most are
programming languages: COBOL, FORTRAN, SPL, and Pascal. We provide the
"language" JOB for files with 80 columns per line, without sequence numbers (e.g.,
batch job streams). The "language" Data is provided for files with a nonstandard line
length (e.g., Set Length 45, Set Length 132), but less than or equal to 1,000 columns
per line. The "language" Text is like the language Data, but for lines with less than
256 columns. The language of a file tells Qedit how long the records may be, where
the sequence number goes, what compiler to use on the file, and much more.
For Qedit workfiles, the language is assigned to the file when it is created (see Set
Lang, New and Text).
Qedit also determines a language for each external file (COBOL, COBOLX, SPL,
FORTRAN, Pascal, RPG, Job, Text) by looking at the record length, the file code
and the format of the first record. When external files are accessed, Qedit determines
these attributes following rules that are defined in appendix B. There is no need to
specify the Lang explicitly, unless there is an ambiguity (e.g., /Text datafile,UNN
because the file has numbers in last eight columns).
Left
The Set Left command allows you to set a left margin for lines in your workfile.
When you do this, existing data to the left of the margin column is retained
unchanged, even though you may edit the rest of the line. Of course, if you Delete a
line, the entire line is gone. You can also use Set Right to create a right margin.
Length
The maximum length of lines in a Qedit workfile is 8,172 columns, if the file has Set
Lang Data. Other Lang values are limited to length 80 or less (72 for SPL,
FORTRAN, and Pascal, 74 for COBOLX and 66 for COBOL without the comment
columns). For Text and Data files, the maximum line length can be defined using Set
Length (maximum is 256 for Text, and 8,172 for Data).
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 337
Line
A line is a sequence of characters within a Qedit workfile. It has a length which may
vary as the line is edited and a maximum length. Many Qedit commands are based
on the line. List displays lines, Delete deletes lines, etc. If you use margins (Set Left,
Set Right), you can only list and edit the portion of the line within the margins. Each
unique line has a linenum that determines its position within the workfile.
55.01 Sample line of text.
Linenum
Each line in the workfile has a linenum (e.g., 999.99) that determines its relative
location in the workfile. Because each line number has a fractional part, lines can be
added between existing lines. For example:
/add 1.1
1.1 line inserted between 1 and 2.
1.2 line inserted between 1.1 and 2.
1.3 //
/list 1/2
1 *REMARK
1.1 line inserted between 1 and 2.
1.2 line inserted between 1.1 and 2.
2 IDENTIFICATION DIVISION.
The smallest increment that you can have between two lines is 0.001. After adding
enough lines in a single spot, you will not be able to add any more. For example,
lines cannot be added between 5.111 and 5.112. When this happens, use Renum to
renumber all or part of your file, or use Set Vis Renum On.
The simplest form of Qedit commands refers to a single linenum:
nnnnn.nnn: 1 1.0 1.05 .05 100 1000 10000.001
FIRST: the first line in the file (lowest line number)
LAST: the last line in the file (highest line number)
[ : default abbreviation for FIRST
] : default abbreviation for LAST
* : the most recently accessed line
Examples of commands that refer to a single linenum are:
/add 50.1 {add new lines at line 50.1}
/c "X"Y" 100 {change X to Y in line 100}
/delete last {delete the last line in the file}
/list [ {list the first line in the file}
/modify * {modify the "current" line}
/replace ]-1 {replace penultimate line in file}
/list 200.1 {list line 200.1, if it exists}
338 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
Qedit also supports relative line numbers, as in List LAST-5 or Modify *-5/*+5.
Looping
Qedit allows looping string searches in almost every command. To list all lines
containing "Sam Spade", use:
/list "Sam Spade"
In command files and UDCs you have another choice: the While command. This
allows you to execute a set of commands each time a string is located.
Note that While looping is not required to replace strings in all lines containing a
search string. The Change command will do it, as in this example, where any lines
containing the string "!job" in the first four columns will have the string "oldpass"
changed to "newpass".
/change "oldpass","newpass" "!job"(1/4)
You can also modify, delete, replace, hold, keep, or copy lines that match a string.
Margins
Using Set Left and Set Right you can define margins for your workfile. The existing
data outside the margins is unchanged when you edit within the margins. This can be
extremely useful for editing files with more than 80 columns per line.
Member
See Copylib Members.
Memory Lock
Qedit has commands for enabling and disabling the terminal Memory Lock. This is
so that you can leave the User Keys displayed on your terminal and still access the
Memory Lock function:
/$ {or $+enables memory lock}
/$- {disables memory lock}
To use memory lock when prompted for a command, just move the cursor up to the
desired line, type "$" and hit Return. This feature does not work in Visual mode.
MPE Command
Qedit can execute MPE commands, including Run and Prep. If Qedit does not
recognize the command as one of its own or as a UDC, it tries to treat it as an MPE
command. If your command can be treated as a Qedit command, it will. This means
the some MPE commands such as Help and many short UDC names such as UT
must be entered with a colon prefix. To require a colon for MPE commands, use Set
Limit Colonreq ON.
Examples of MPE commands are :Listf to get a list of your files; :Tell to send
messages to other users, :Showtime to get the date and time, :Showjob to get a list of
other users on the computer, :Cobol to compile, and :Stream to launch a job.
/:showjob
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 339
/showjob
Patterns
You can ask Qedit to look for a pattern instead of a specific string by using the
Pattern window option:
/list ".@key@" (pattern)
The command above displays all lines that contain a period in column 1, and the
string "key" with anything in between and at the end. The string window can also
specify Upshift to ignore case and Nomatch to select lines that fail to match.
Organize your PATTERN string like an MPE pattern-match (i.e.,
"@UPD@MASTER@"). You can combine it with the UPSHIFT option. Qedit will
only find the pattern within a single line of text, not spanning two lines.
The special characters in a pattern are:
@ to match anything, including nothing
# to match a single numeric digit
? to match a single alphanumeric character
~ (tilde or wavy line) to match zero or more spaces
& match next character (use to match "@")
^ (reserved for future use)
! (reserved for future use)
Important: At-signs (@) are needed at both ends of a pattern if you want to search
for a pattern at any spot in the line. List "QEDIT" (PATTERN) matches only lines
consisting of "QEDIT" only, starting in column 1.
The Nomatch and Pattern options are ignored for the Change target string. If you try
to use them, Qedit prints a warning.
Here are some sample commands containing window options:
/list "bob" (upshift) {"bob","BOB","Bob",etc.}
/list "@BOB@" (pattern) {lines containing "BOB" anywhere}
/list "BOB@" (pattern) {lines with "BOB" in column 1}
/del "&@@" (pattern) {delete lines starting with @}
/mod "@fix@QEDIT@"(pat) {lines with two strings}
/delete "~" (pattern) {delete all blank lines}
/list "^[A-Z][a-z]*" (regexp) {lines starting with an uppercase}
Procedure
The Proc command allows you to add your own commands to Qedit. Proc will load a
"procedure" (subroutine, function, whatever) from an SL file using the Loadproc
intrinsic and then treat it as part of Qedit. We provide two sample Proc routines in
the file Routines.Qlib.Robelle: NEATER to neaten COBOL source, and FINDJUNK
to remove nonprinting characters from files. The rules for writing a Qedit procedure
can be found in Appendix C.
340 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
The Proc command has two useful procedures built into it at all times: DOWN and
UP to downshift and upshift lines.
Qeditscr
Qedit uses a job-temporary scratch file called Qeditscr whenever you have not
provided a workfile for Add or Text, and Random scratch files are not used (see Set
Work). This can be useful for preparing production batch jobs from skeleton jobs
(Text JOB23), or in any situation where you want to edit a Keep file and Keep it
again immediately.
If you decide that you want to save the contents of the current Qeditscr file as a
regular, permanent Qedit file, use Shut filename. Once created, Qeditscr remains as
an old temporary file until you log off the system with :BYE, even if you leave and
re-enter Qedit. Each time Qeditscr is opened or closed, a warning is printed.
Set Work Temp OFF disables the use of Qeditscr on Add or Text. This is a good idea
if you're using a modem line which might end your session unexpectedly. On
disconnection, a temporary file evaporates. A permanent file would be saved, even
though your last few changes may not have been applied.
If you have Set Work Random On, Qedit will use Qednnnnn in your logon group and
account, where nnnnn is a random number.
Quiet-Q Option
You may append one or two option letters to a command name: J, T, and Q. For
example, the Add command has these variations: AddQ, AddT, AddJ, AddQT, and
AddQJ. The Q option means QUIET, without line numbers, or without printing the
lines processed. For example:
/lq 5/10 {list lines 5/10 without line numbers}
/kq paul {save lines without line numbers}
/aq 5.01 {add new lines, but don't prompt}
/aq 10.00=abc {add file without printing the lines}
/hq 45.1/.9 {replace Hold, but don't print lines}
/cq "X"Y" {change X to Y, but don't print line}
Range
A range is just a series of lines defined by a starting line number, a slash (/) and an
ending line number. ALL is short for FIRST/LAST and @ is short for ALL. If the
ending line is left off, Qedit assumes LAST. You can shorten a range like
516/516.554 to 516/.554.
/a 20=100/120 {copy range 100/120 after line 20}
/c "X"Y" */200 {change X to Y in current line to 200}
/delete all {delete the range ALL}
/keep tF3 [/200 {write the range [/200 to a file}
/list 100/ {list the range 100 to LAST}
/m 1111/.99 {modify the range 1111/1111.99}
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 341
/list last-10/ {list the last 11 lines in the file}
/l @ {list the entire workfile}
/zz 5/10;l zz {mark a range, then list it}
Rangelist
Qedit commands usually contain a part called the rangelist. A rangelist is simply a
sequence of line ranges separated by spaces or commas. A rangelist indicates which
lines the command should operate on. Here are some sample ranges:
1
{a single line}
1/4
{lines 1 through 4, inclusive}
25/100.1 {lines 25 through 100.1}
100/
{lines 100 through the LAST line}
ALL
{lines FIRST through LAST}
*-9/*+9 {area around current line}
Here are some sample rangelists:
1,5
{lines 1 and 5}
1/5 10/20
{lines 1 through 5 and 10 through 20}
25,33/100
{lines 25 and 33 through 100}
A rangelist can contain overlapping lines. Qedit does not try to resolve the ranges
into a list of ordered, unique lines. The ranges are processed as they appear in the
list.
30/40,1/10
{lines 30 to 40, then 1 to 10}
1/10 5/20
{lines 5 to 10 are processed twice}
all,all
{process the entire file twice}
A rangelist can also contain a string search:
"strg"
{search the entire file for "strg"}
"strg" 10/20
{search only lines 10 through 20}
A rangelist can include up to 10 strings (see String for definition). Strings are
separated from each other by an OR or AND keyword. Each string can have its own
search setting such as column range and options. OR and AND keywords can not be
mixed in a rangelist.
When OR is used, each string is compared in turn against the text. As soon as a
match is found, the line is selected. Thus, most commonly found strings should be
placed at the beginning of the list to increase speed. For example,
/List "abc" or "xyz"
{ search for "abc" or "xyz" }
/C 1/2 "ME" "abc" (u 30/35) or "xyz" (50/60 s)
{ search for caseless "abc" in columns 30/35 or }
{ smart "xyz" in columns 50/60 }
When AND is used, all strings are searched for on each line and all strings must be
found for the line to be selected. The strings do not have to be in the same order. As
soon as one string is not found, the line is rejected.
For example,
342 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
/List "abc" and "xyz"
{ search for "abc" and "xyz". Both strings must be present, }
{ anywhere on the line, in any order
}
/C 1/2 "ME" "abc" (u 30/35) and "xyz" (50/60 s)
{ search for caseless "abc" in columns 30/35 and
}
{ smart "xyz" in columns 50/60
}
{ If either string is missing, the line is not selected. }
The complete rangelist is saved and used when the "previous string" syntax (i.e., a
null string) is entered. For example, /List "".
Each command has a default rangelist. The following commands default to "*", the
current line:
Add, Append, Change, Delete, Find (start search at *), Hold, List, Modify, Proc,
Replace, Visual (enter Visual mode at current line), ZZ.
Justify defaults to "*" for Center, Left, or Right, and to */end (maintaining blank
lines between paragraphs) for Format or Both.
Before, Do, and Redo defaults to the last command entered.
Relative Line Numbers
When you tell Qedit which line you are interested in, you can either specify the exact
line number, as in
/list 5 or /list last
or you can specify a position relative to an exact line, as in
/list *+6 or /list last-1
The first lists a line that is 6 lines after the current line and second lists the second
from last line in the file. The "*" is optional. Relative line numbers can go forward or
backward 10,000 lines.
To modify the text around the current line, use
/modify *-5/ {use Control-Y to stop the Modify}
/modify -5/ {the * is optional}
Qedit will even let you use relative line numbers when looking at an external file, as
in
/list invoice.job last-10/last
Right
You can use the Set Right command to define a right margin for the lines in your
file. Any data beyond the margin will remain unchanged as you edit the data to the
left of the margin. You can also set a left margin with Set Left.
Shifting
The Qedit string window has an option to match strings even if they differ in case. If
you want to match "speed demon", "SPEED DEMON" or even "Speed Demon", do:
/list "speed demon" (upshift)
If you want to change the case of letters in your text, use either Proc DOWN
(downshift entire lines), Proc UP (upshift entire lines), ^W^S^D in Qzmodify
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 343
(downshift from cursor to end of line), ^W^S^U in Qzmodify (upshift to end of line),
or ^C in Qzmodify (reverse case of cursor).
Size
A size is an integer that specifies the number of lines to be allowed in a workfile. The
minimum size is 200 lines, and the the maximum is either 65,535 (original-format
workfiles) or 99,999,999 (Jumbo and Wide-Jumbo workfiles). The default size is
3,200 lines, but can be changed with Set Work Size. This term occurs in the New,
Text and Set Work Size commands:
/new abc(1000) {build "abc" with room for 1,000 lines}
/text q(5000)=s {build "q" for 5,000 lines, copy S in}
/s work size 600 {set default size for NEW workfiles}
Spool Files
Output spool files (sometimes called "spoofles") hold reports or listings that are
waiting to print on a shared system printer. On MPE V you must use the Spook
program to look at spool files, but on MPE/iX they are normal files that can be
Texted, Listed and Destroyed in Qedit. To make this easier, Qedit recognizes # as
preceding a spool file number and automatically converts it into the proper file name:
/showout sp;ready
/text #1234 {O for output is assumed}
/list #o899
/destroy #889
$Stdin / $Stdinx
A system-defined file name referring to the standard input "file" (which can be an
actual file or a device). $Stdin usually refers to the keyboard for interactive sessions
and an input spool file for batch jobs. $Stdin treats a line starting with a colon as
end-of-file. $Stdinx treats the colon (:) prompt appearing in the first column of input
data as part of the data file, rather than as an end-of-file indicator. Qedit reads from
$stdinx so that MPE commands entered with a colon do not cause Qedit to terminate.
$Stdlist
A system-defined file name referring to the standard output "file" (which can be file
or a device). $Stdlist usually refers to the terminal for interactive sessions and the
printer for batch jobs.
String
Most Qedit commands can specify a string of characters to be searched for in the
workfile. Only lines containing the string are processed by the command. A string is
delimited by quote characters ("SAM") or by one of these other special characters:
'
|
\
~
_
!
#
&
:
(as in :SAM:)
The delimiter list can be customized with the Set Stringdelimiters command.
344 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
The maximum length of a string is 80 characters. Apostrophe is a valid string
delimiter when Set Decimal is OFF (handy because ' is an unshifted key on many
keyboards). All these delimiters can be used within Qedit commands. Some
delimiters, like the colon, cannot be used in an implied search or on the home line
(===>) in full-screen mode.
/QEDIT {find the next occurrence of the word QEDIT}
/:QEDIT: {colon prefix identifies a system command}
You can specify more precise string matching by appending a window to the string
("SAM" (UPSHIFT), etc.). A null string ("") refers to the previous string entered,
with the same window as before. For example:
/c "QEDIT"Quedit"@ {change spelling in all lines}
/l 'QEDIT' (upshift) {match uppercase and lowercase}
/find \withh\ {find spelling error; fix it}
/change \\with\
Tab
The TAB key can be used to skip logically to the next Tab stop (also physically, if
Tabs are set on the terminal). If more Tabs are included in a line than there are Tab
stops, a new work line is created. The default tab key is Control-I (TAB), but it can
be changed (Set Tabs "_"). The default Tab stops are every 10 columns (MPE) or
every 8 columns (HP-UX), but you can set the tabs to whatever columns you like
with Set Tabs.
Template-T Option
You may append one, two, or three option letters to a command: Q, J, or T. For
example, the List command has these variations: ListQ, ListT, ListJ, ListQJ, and
ListQT. The T option causes a column-number template to be printed once before
the command is processed. The T option is most useful with Add, List and Modify.
/LQT 1 {T=template of column numbers}
1...+....10...+....20...+....30...+....40...+....
LINE 1.
UDC
UDC stands for "User Defined Command", a feature of MPE that allows you to
abbreviate MPE commands and make up new, complex commands from existing
commands. Qedit has the ability to recognize and execute many common user
defined commands (UDCs). Use the Set UDC command to tell Qedit what UDCs
you wish to have it recognize.
Visual Editing
Besides the traditional Line mode editing that Qedit supplies, it has another editor
built into it, a full-screen editor entered via the Visual command.
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 345
Window
A window is used to limit the extent of string matching. Normally, specifying a
string in a rangelist implies processing all lines where the string occurs anywhere
within the line, regardless of starting column and surrounding context.
With a window, string matching can be restricted to a specified column window
(example: 10/30 means column 10 through column 30). Shorthand: (1) = (1/1), ([/30)
= (first column/30), and (30/]) = (30/last column). Use a (1/132) window with
"TEXT" files to reduce the record width to 132 columns. The column numbers begin
with 7 in COBOL and 1 in the other languages.
The complete syntax for a window is: ( [column/column] [ keyword]...)
The window keywords are
(SMART | NOSMART)
{default=NOSMART}
(UPSHIFT | NOUPSHIFT )
{default=NOUPSHIFT}
(PATTERN | NOPATTERN)
{default=NOPATTERN}
(MATCH | NOMATCH ) {default=MATCH}
(REGEXP | NOREGEXP )
{default=MATCH}
A single window may specify multiple options separated by spaces or commas and
following the column range, but if Pattern is included the Smart-NoSmart option is
ignored. That is, (Upshift Pattern) makes sense, but (NoSmart Pattern) does not. The
options are independent and setting or resetting one does not change the others.
With the Smart keyword, Qedit matches a string only if the string is preceded by a
"special" character, or the start of the window, and is followed by a "special"
character, or the end of the window. In SPL, the apostrophe is not "special". In
COBOL, the hyphen is not "special". In Pascal, the underline is not "special". In
FORTRAN, embedded spaces are allowed.
When you specify Nomatch, Qedit selects the lines that do not contain the string.
The default of course is MATCH to select lines that do contain the string.
With the Upshift window keyword, Qedit ignores the case of letters in deciding
whether to find a match.
Pattern means that the string in the window is to be treated as a pattern to be matched
(i.e., "@UPD@MASTER@"). It may be combined with Upshift.
Regexp means that the string in the window is to be treated as a regular expression to
be matched (i.e., "UPD.*MASTER"). It may be combined with Upshift.
Here are some example uses of windows:
/list ".begin" (1/10 upshift) {.begin in 1st 10 cols}
/list "@begin@end@" (pattern upshift) {...begin...end...}
/list "^begin.*end$" (regexp noup) {begin...end}
A window can be specified permanently with the Set Window command, or
temporarily after any string in a rangelist. For example:
/set window (smart) {use Smart for all string searches}
/list "sum" {defaults to Smart searching}
/l "Sam" (upshift) {upshift in this command only}
346 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
Workfile
Qedit manipulates a collection of text lines that is called a workfile. The workfile is a
compact disc file with a permanent name that you can edit and compile. It replaces
the standard Keep file and the Editor K-file, and eliminates high-overhead "Text"
and "Keep" operations. Workfiles have a CODE of 111. Use New or Text to build
them. The scratch file is a special workfile that is the default, temporary workfile.
To provide the fastest possible response time, Qedit does not write every word that
you type out to the disc. Thus, after a system crash (or phone disconnection), you
could lose up to 10 lines of text. If you wish to force Qedit to post your changes to
the disc, you can either Shut the workfile or do a :Continue command.
Qedit saves the "context" of the workfile (i.e., Set Left/Right, current line number,
Set Length, etc.) when you Shut it. When you Open the workfile again, Qedit recalls
the same context. The Open command prints a compact warning of any features it
sets from the user label.
Special Characters
Certain nonalpha and nonnumeric characters like * and / have special meaning
within Qedit:
?
Means Help, Nonprinting Characters,
Alphanumeric (in Patterns) or Optional (in Regexp)
Typing a question mark in the Visual home line or in response to the Line mode
prompt (/), is a request for on-line Help. In Visual you can get more detailed
assistance by typing Help, instead of "?," in the home line.
When Visual prints a ? at the start of a line, it means that the line contains
nonprinting characters, which are replaced by dots (.).
Question mark "?" in patterns matches a single alphabetic or numeric character:
/list "BASE??"(pattern) {"BASE" plus 2 alphanumerics}
A question mark (?) in regular expressions qualifies the preceding character and
makes it optional. This means the character may or may not be there. In either case,
the search is successful.
/list "cancell?ed" (regexp) {"canceled" and "cancelled" are found}
$
Means Hex, Standard File, Memory Lock, List
Option, Previous File or End-Of-Line (in Regexp)
Dollar sign is used by MPE for standard file names ($oldpass, etc.).
Dollar sign is used by Qedit to enable (/$) and disable (/$-) memory lock at the
current line.
Dollar sign is used by many compilers as the prefix for commands (e.g., $include,
$control, etc.).
In the calculator, $ is the prefix for a hexadecimal value (=$FF).
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 347
The List command has a variety of temporary options preceded by $. For example:
/list $octal 5/6 {octal dump}
/list $incl abc {Include files}
$ can be used as a shortcut to refer to the "previous" file name referenced in a Qedit
command. For example, after List XXX, Add 1=XXX, Use XXX, Destroy XXX,
Stream XXX, Keep XXX, or Shut XXX, the $ file name is XXX. If you already have
an open workfile or scratch file, a Text or Open command makes Qedit shut the
current workfile. Thus, the $ file name now contains the previous workfile name. If
you are not using a workfile, then $ is not updated by the Text or Open command.
However, it is updated by a Shut command without a file name. You can use $ as a
shortcut in commands that refer to an external file name (Open $, Add 1 = $, List $,
Destroy $, Use $, etc.). Verify $ shows you the name of the "previous" file. $ is also
valid as a parameter in a User Command.
A dollar sign ($) in regular expressions identifies the end of a line. It takes on this
meaning only if it is the last character in the regexp. If used anywhere else in the
expression, the dollar sign is used as a literal.
When it represents the end of a line, the dollar sign can find a successful match only
when the string is the last thing on a line.
/list "The END$" (regexp) {line must end with "The END"}
^
Means Findup, Control-Char, Start-of-line (in
Regexp) or Negate (in Regexp)
The circumflex character (^) is a short name for the Findup command. In
documentation, it often indicates a control character (^A is Control-A). If you are not
on an HP terminal, you can use ^1 through ^8 to simulate the user function keys in
Line mode. That's circumflex-1, not Control-1!
The circumflex (^) in regular expressions identifies the start of a line. It takes on this
meaning only if it is the first character in the regexp. If used as the start-of-line, it
indicates that the string must be the first thing on that line for a successful match.
/list "^Once upon" (regexp) {line must start with "Once upon"}
If it used anywhere in the expression and is not preceded by a backslash, it is used as
a literal.
If the circumflex (^) in a regular expression is preceded by a backslash (\), it
indicates a control-character combination. The character to the right of the
circumflex makes up the actual control character.
/list "\^G" (regexp) {Control-G or Bell character}
The circumflex (^) in a character class within regular expressions negates the list of
characters in the class. It takes on this meaning only if it is the first character in the
class. If used anywhere else in the class, it is used as a literal.
If used as a negation, it indicates that the match is successful if the character in the
specified position of the text is not in the class list.
/list "[^abc]" (regexp) {successful if not "a," "b," or "c"}
348 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
.
Means Nonprinting, Reset, Decimal Point or Any
Character (in Regexp)
The most common use of a period is as a decimal point in line numbers: 12.3.
Visual, Qzmodify and List $char use a period to represent nonprinting characters in
displays.
A period as a command at the Visual home line means "reset the current Cut and
Paste task".
A period or dot (.) in regular expressions is a placeholder for any character.
/list "[a.c]" (regexp) {one character between "a" and "c"}
!
Means Posix Command or Too Long
When a line is too long to print on the Visual screen, Qedit prints an exclamation
mark at the start of the line.
Put an exclam "!" at the start of a line to indicate a Posix shell script or command.
/!ls {list current directory}
%
Means Octal or String
Percent (%) means either an octal value (%454) or a string (/list %xxx%).
*
Means Current, Refresh, Multiply or Quantifier (in
Regexp)
In the calculator, * means multiply, as in =5*30.
In Visual, an * at the ===> command lines tells Qedit to Refresh the screen. When
using Set Vis Update On to automatically update the screen, *> or *< moves ahead
or back one page, without updating the current page.
You can refer to the current line in your workfile by means of "*" (e.g., Modify *10/*+10). "*" is usually the default rangelist for a command if you do not specify
one. The *-pointer is moved by these commands:
Command
Add
Status of "*" After the Command
last line added.
Change last line changed.
Delete
previous or next line, it depends.
Find
last line found or end-of-file.
Findup last line found or start-of-file.
Hold
last line held.
Justify last line updated.
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 349
Keep
no change to current line.
List
last line listed.
Lsort
last line sorted.
Modify last line modified.
Proc
last line passed.
Replace last line replaced.
Text
first line in file.
Visual
*-line of last page displayed.
An * can also refer to the "current" (or recent) workfile; as in Open *, Use *, :Cobol
*, :Stream *, Text *, or Shut *. The * shortcut refers to the currently open Qedit
workfile unless none is open, then it refers to the one most recently Shut. An * also
works as a parameter in a User Command.
An asterisk (*) in regular expressions indicates the preceding element might repeat
zero (optional) or more times in the text.
/list "op*q" (regexp) {"p" might be missing or appears many times}
\
Means Previous, String, Literal Match (in Regexp)
or Special Characters (in Regexp)
If you enter only a Return in a command line, Qedit increments the current line
pointer to the next line and displays it.
If you enter a command line containing only a backslash ("\"), Qedit decrements the
current line to the previous line and displays it. Entering several backslashes ("\\\")
displays backwards several lines.
You can also use \ as a string delimiter (e.g., /list \xxx\).
A backslash (\) in regular expressions is used to indicate the next character must be
used as a literal. It removes any special meaning this character might otherwise have.
/list "\[" (regexp) {"[" is not start of character class}
A backslash (\) in regular expressions might qualify the next character as a special,
nonprinting character. These are special characters:
\b Backspace
\f Form feed
\n New line (line feed)
\r Carriage return
\s Space
\t Horizontal tab
\e ASCII escape character (ESC)
\DDD 1-3 octal digits representing a character's ASCII value
\xDDD 1-3 hex digits representing a character's ASCII value
\^C Control code (e.g,. Control-G (^G) is the Bell character)
350 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
/
Means Prompt, Range Delimiter, Stop, Exit, or
Divide
Qedit uses the slash "/" in many places:
As the Qedit prompt character (e.g., /Add).
As the delimiter in a line range (e.g., 500/600).
As the delimiter in a column range (e.g., Change 1/2 "").
// (two slashes) terminate input in the Add command
(same as Control-Y).
In Visual, / at the ===> line means Exit from Visual mode.
In the calculator, as a divide (e.g., =100/5).
[
Means FIRST, [default] or Start Class (in Regexp)
Left bracket ([) is short for the FIRST line in the file, by default. This abbreviation
can be changed with Set Zip.
/list [ {list first line}
In questions, Qedit shows the default answer in square brackets:
Purge existing file [No]?
In the documentation, [ and ] indicate optional fields in commands (e.g., List
[rangelist ]).
Left square bracket ([) in regular expressions indicates the start of a character class.
/List "x[abc]z" {character class starts with "a"}
]
Means LAST or End Class (in Regexp)
Right bracket (]) is short for the LAST line in the file, by default. This abbreviation
can be changed with Set Zip.
/delete ] {delete last line}
In the documentation, [ and ] indicate optional syntax fields (e.g., Delete [rangelist]).
Right square bracket (]) in regular expressions indicates the end of a character class.
/List "x[abc]z" {character class ends with "c"}
{}
Are for Comments or Indentation
Qedit commands can have comments attached to them, as long as they are enclosed
in curly braces:
/keep justify.stream,yes {update disc file}
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 351
Qedit recognizes these comments at the "/" prompt, in usefiles, command files, and,
although MPE won't like them, in UDCs. Qedit also accepts comments on the home
line in Visual mode, and at the More? prompt in Browse mode. In command files
and UDCs, you can place your {comment} on continuation lines, before or after the
ampersand (&).
STREAMX Warning: Don't use these {comments} in job streams if you use
STREAMX from VESOFT because it interprets them as parameters to be
substituted.
Braces are also used in the Add Justified and Replace Justified commands to indicate
a change of indentation.
@
Means ALL
The at sign (@) means "all" in some fashion:
/list @ {all lines in a file}
/help list,@ {all information about List}
/:listf @.source {all files in a group}
/l "Cu@"(pattern) {all strings starting with "Cu"}
The abbreviation for "all lines" is @ by default, but can be changed with the Set Zip
command.
&
Means Literal Match or Continue MPE Command
Ampersand (&) in a pattern-match string means to match the next character literally,
even if it is an "@" or other character with pattern meaning:
/list "&@@"(pat) {all lines starting with "@"}
In command files and UDCs, & is used at the end of lines to continue the command
to the next line.
:
Means MPE or String
Colon ":" at the start of a command line indicates an MPE command:
/:listf {list files while within Qedit}
Colon is also a valid string delimiter:
/list :barbara:
;
Means Multiple Commands
Semicolon ";" combines two or more Qedit commands on a single line:
/list 5/10;add 5.5
Entering several semicolons (";;;") displays forward several lines.
352 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
When combining Qedit commands, be sure to use the same quote character in all of
them.
Incorrect: Correct:
/c7/7"DISPLAY";c\.\\ /c7/7"DISPLAY";c".""
If you want to include MPE commands in the list and their syntax requires
semicolons, Qedit might not be able to parse the list correctly. To work around this
problem, you can put parentheses around the whole command. For example,
List 5;Listspf o ;seleq=[owner=mgr.acct];List 4
fails
List 5;(Listspf o ;seleq=[owner=mgr.acct]);List 4
works fine
If some commands require semicolons and parentheses, you have to put the
problematic command in a command file, UDC or set an MPE variable and use it in
the command list instead.
,
Means a List
Comma "," separates items in a list:
/modify 5, 10, 20/30, 44
Most commas are optional in Qedit.
=
Means Copy or Calculate
Equal sign "=" usually means copy something:
/add 5 = inclfile {copy "inclfile" into your file}
/add 5 = 10/20 {copy lines 10/20 after line 5}
/text w2 = w1 {build "w2" and copy "w1" into it}
Equal sign at the start of a command means to calculate something:
=10+25 {evaluate the expression}
Result= 35.0
<
Means Move, I/O Redirection or Backward Page
Less than "<" in the Add command means to move the lines instead of copying them:
/add 5 < 10/20 {move lines 10/20 after line 5}
Less than "<" in an MPE/iX command means to read input from an external file.
/suprtool.pub.robelle <3 {move back 3 pages after Enter or F7}
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 353
>
Means Forward Page, I/O Redirection, Modify or
Qhelp
Greater than ">" in the Visual home line means to move forward one or more pages.
===>>5 {move ahead 5 pages}
Greater than ">" in an MPE/iX command means redirection of output to a file other
than stdlist.
/showproc >myfile
The ">" symbol is used as a subcommand of HP-style modify, invoked as part of the
Modify, Redo or Before command, and meaning "end of line".
">" is the prompt when in the QHELP subsystem.
"
Means String
Double quotes are the nominal string delimiter in Qedit (List "BOB"). However, you
can use any of several special keys for string delimiters in a command:
/find "witth" {double quotes as quote}
/find :witth: {use colon instead of quote}
(
Means Start Parameter, Member, Command or
Subpattern (in Regexp)
Left parentheses "(" introduces the size of a file, a window for string matches, or the
name of a Copylib member, and is always matched by an ending ")".
/list "string" (smart upshift)
Left parentheses "(" can be used to enclose commands which include commas or
semicolons that might be confused with delimiters. Qedit considers everything
between the left and right parentheses as one command. This is mostly useful when
multiple commands appear on one line.
/F "test";(listspf o ;seleq=[owner=mgr.acct]);Li */*+5
Left parentheses "(" are used to divide regular expressions into smaller portions
called subpatterns. Left parentheses identify the start of a subpattern.
/List "x(abc)z" {subpattern starts with "a"}
)
Means End Parameter, Member, Command or
Subpattern (in Regexp)
Right parentheses ")" completes a file size, a window for string matches, or a
Copylib member name, and is irresistibly attached to "(".
/list "Robelle" (upshift)
354 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
Right parentheses ")" completes command enclosure which include commas or
semicolons that might be confused with delimiters. Qedit considers everything
between the left and right parentheses as one command. This is mostly useful when
multiple commands appear on one line.
/F "test";(listspf o ;seleq=[owner=mgr.acct]);Li */*+5
Right parentheses ")" identify the end of subpatterns inside regular expressions.
/List "x(abc)z" {subpattern ends with "c"}
+
Means Ahead Some Lines, Add or Quantifier (in
Regexp)
Plus (+) means move ahead a relative number of lines.
/mod *+1
A plus sign at the Visual home line means move roll ahead a number of lines.
===>+15 {roll ahead 15 lines}
Plus in the calculator means add (e.g., =5+10).
A plus sign (+) in regular expressions indicates the preceding element might repeat
one or more times in the text.
/list "op+q" (regexp) {"p" must be there one or more times}
Means Back Some Lines, Minus or Range (in
Regexp)
Minus (-) means back a relative number of lines.
/list *-20/
Minus in the Visual home line means roll back a number of lines.
===>-10 {roll back 10 lines}
Minus in the calculator means subtract (e.g., =1010-40).
Minus (-) in a character class within regular expressions indicates a range of
characters. It takes on this meaning if it appears between two other characters. If it
appears at the beginning or end of the class, it is used as a literal.
/list "[a-z]" (regexp) {range of lowercase letters}
/list "[-az]" (regexp) {character class "-," "a" and "z"
#
Means Numeric Pattern, Spool File or Previous
Result
In a filename, crosshatch "#" precedes the number of a spool file:
/text #o123
In pattern-matching, crosshatch "#" matches a single numeric character:
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 355
/list "rec##"(pattern) {"rec" followed by 2 digits}
In the calculator, you can use # to include the previous result in the next calculation.
~
Means Spaces (Pattern), Recent Page or Field
In a Pattern, ~ (tilde) means to look for zero or more spaces.
At the Visual home line, the ~ (tilde) command means display the page that you
most recently left. It actually corresponds to the Visual current line "*". So, it can be
used from line-mode to reference that line.
The tilde is also used in Visual mode as a field separator within text lines that are to
be divided (VV) or glued (GG).
Index
- means back some lines or minus ....................................... 355
- means range (regexp) ........................................................ 355
!
! in Visual mode ............................................................ 20, 349
! means Posix command ...................................................... 349
?
? in Visual mode .................................................................... 20
? means alphanumeric (pattern) .......................................... 347
? means optional (regexp) ................................................... 347
.
. means any character (regexp) ............................................ 349
. means reset Visual cut-and-paste ........................................ 25
... (dot-dot-dot) ........................................................................ 4
(
)
) means command ............................................................... 355
) means parameter/member ................................................. 354
) means subpattern (regexp) ................................................ 355
[
[ means character class (regexp) ......................................... 351
[ means FIRST or [default] ................................................. 351
[default] ........................................................................... 4, 351
]
] means end class (regexp) .................................................. 351
] means LAST ..................................................................... 351
{
{braces} for comments .................................................. 94, 351
@
@ means ALL ..................................................................... 352
( means command................................................................ 354
( means parameter/member ................................................. 354
( means subpattern (regexp) ................................................ 354
*
* means refresh the screen .................................................... 31
* means repeating (regexp) ................................................. 350
356 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
*, current file ............................................................... 126, 350
*, current line....................................................................... 349
>
> means forward page ......................................................... 354
/
/ for Qedit commands in cmdfiles ....................................... 192
/ to exit from Visual .............................................................. 23
/, prompt and range delimiter .............................................. 351
// ends line input .................................................................... 95
/Qedit command .......................................................... 134, 192
~
~ (tilde)
blank pattern ................................................................... 125
~ (tilde), blank pattern ......................................... 249, 340, 356
~ (tilde), field separator ........................................... 26, 27, 241
~ (tilde), most recent screen ................................................ 356
&
&, ampersand in patterns ............................................. 249, 352
$
^ (circumflex) .......................................................... 35, 36, 348
^ means control character (regexp) ..................................... 348
^ means negate (regexp) ...................................................... 348
^ means start-of-line (regexp) ............................................. 348
$ means end-of-line (regexp) .............................................. 348
$, memory lock.................................................................... 347
$, previous file ............................................. 126, 155, 160, 348
$copy option, List command ............................................... 158
$device ................................................................................ 159
$device options.................................................................... 156
$double option, List command ............................................ 158
$even option, even number of pages ................................... 163
$file ..................................................................................... 267
$include option, List command ........................................... 158
$lp options ........................................................... 137, 156, 159
$noskip option, List command ............................................ 160
$odd option, odd number of pages ...................................... 163
$-options, List command ..................................................... 156
$post option, List command ................................................ 160
$pre option, List command ................................................. 160
$record option, List command ............................................ 156
$shift option, List command ............................................... 158
$skip option, List command ................................................ 160
$stdin / $stdinx, definition of .............................................. 344
$stdlist, definition of ........................................................... 344
$use option, List command ................................................. 158
+
1
+ means ahead some lines or add ........................................ 355
+ means repeating (regexp) ................................................. 355
1234
RCRTMODEL .................................................................. 49
132-column mode, controlling ............................................ 246
#
# means numeric/spool file ................................................. 355
%
% for external program ....................................................... 214
% for MPEX .......................................................................... 97
%, octal number................................................................... 349
%listf x,id ............................................................................ 322
^
<
< means move ..................................................................... 353
5
512-column width ............................................................... 239
=
= means copy....................................................................... 353
===> commands ................................................................... 29
Qedit 5.9 for HP e3000 User Manual
7
700/92 terminal ..................................................................... 19
700/9x and Visual ............................................................... 297
Qedit Glossary • 357
A
A4-size paper....................................................................... 165
abbreviating ........................................................... 93, 255, 332
abortjob.................................................................................. 90
Above, Set Visual option .................................................... 131
absolute file name........................................................ 151, 263
access log............................................................................... 57
Account, Set ........................................................................ 209
ACD security ....................................................................... 153
Activate command................................................................. 98
Adager ................................................................................. 320
Add command ......................................................... 34, 99, 251
Add interface procedure ...................................................... 312
adding a string as a line ....................................................... 101
adding lines ............................................................. 33, 99, 316
AdvanceLink keystrokes ....................................................... 22
Alias Fkey, Set .................................................................... 210
Alias Ignorecase, Set ........................................................... 211
Alias Off, Set ....................................................................... 211
Alias Reset, Set ................................................................... 211
Alias Trace, Set ................................................................... 211
Alias, Set ............................................................................. 209
all lines ................................................................................ 352
Already error ....................................................................... 293
Alter routine ........................................................................ 315
alternate activation .............................................................. 313
Alt-X, changing exit key ....................................................... 62
Alt-Y Reflection command ................................................. 197
Alt-Y versus Reflect .............................................................. 60
ampersand (&), pattern-match..................................... 249, 352
anchors ................................................................................ 326
Append command ............................................................... 105
appending to the end of a line ............................................. 174
appending, Hpmodify .......................................................... 179
approval of changes
Change ............................................................................ 111
Colcopy ........................................................................... 116
Colmove .......................................................................... 119
ASCII, Set Keep .................................................................. 218
Asian character sets ............................................................. 213
attached printer .................................................................... 162
Attachmate .......................................................................... 239
Autocont, Set ................................................................. 43, 211
autoindent ............................................................................ 100
auto-renumbering ........................................................ 100, 243
Aux.Spdata.Robelle dictionary ........................................... 258
B
backreferences ..................................................................... 330
backslash means display previous line ................................ 350
backslash means literal (regexp) ......................................... 350
backslash means special (regexp) ....................................... 350
Backward command ............................................................ 106
BASIC tips ............................................................................ 81
Basicentry option................................................................... 48
batch ...................................................................................... 43
batch control of PC .............................................................. 196
batch, definition of .............................................................. 332
358 • Qedit Glossary
Before command ................................................................. 107
Beginfile command ............................................................. 109
bell characters in Visual .......................................... 20, 90, 239
Bell, Set Visual option .................................................... 20, 90
Below, Set Visual option..................................................... 131
big files .................................................................................. 89
bigcompile, Pascal $ option .................................................. 79
binary files ........................................................................... 218
blank lines
deleting ........................................................................... 125
blank lines, deleting ............................................................ 340
block-mode ............................................................................ 18
Bonus contributed software..................................................... 3
Bonus programs, install ......................................................... 10
Both, Justify ........................................................................ 146
braces for {comments} .......................................................... 94
braces in STREAMX jobs ..................................................... 94
brackets ................................................................................... 4
Break key .............................................................................. 96
browse ................................................... 35, 106, 138, 161, 271
Browse, Open ...................................................................... 182
Browse, Text ....................................................................... 262
browsing through your file .................................................... 23
BS subqueue ........................................................................ 229
building a workfile .............................................................. 181
busy files on Restore ............................................................... 8
Bytestream, Set Keep .......................................................... 218
C
-c cmdstring, Info= option..................................................... 46
C compilers ......................................................................... 320
C tips ..................................................................................... 79
C/iX run-time library........................................................... 300
C/iX troubles ....................................................................... 300
calculator ............................................................... 97, 288, 332
capability list ....................................................................... 187
carriage control...................................................... 88, 161, 218
case, ignoring .............................................................. 112, 343
CC cut-and-paste (copy) ....................................................... 24
CCS, Corporate Computer Systems .................................... 320
CCTL and List formats ......................................................... 88
CCTL files ..................................................................... 88, 160
CCTL, Set Keep .................................................................. 218
Center, Justify ..................................................................... 145
Change command .......................................................... 37, 110
change tagging, COBOL ..................................................... 252
changing line casing ............................................................ 189
character class ..................................................................... 327
character range .................................................................... 328
Check, Set ................................................... 124, 145, 204, 211
Checktimestamp, Set Keep ................................................. 218
Checktimestamp, Set Open ................................................. 228
Ci.Pub.Sys ........................................................................... 296
CIERROR values ................................................................ 192
circumflex (^) ...................................................................... 348
clearing the screen ............................................................... 240
clearing the workfile ........................................................... 264
Close command ................................................................... 114
closing workfile ................................................................... 257
CM compiler interface, installing ......................................... 11
Qedit 5.9 for HP e3000 User Manual
Cobedit program .................................................................... 78
Coberr User Command.................................................... 73, 78
Cobfree, Set Keep ............................................................... 218
Cobfree, Set Lang ................................................................ 223
COBOL comments .............................................................. 253
COBOL compile command ................................................. 121
COBOL compile errors, trapping .................................. 78, 130
COBOL Copylib, searching ................................................ 158
COBOL left margin ............................................................. 145
COBOL source format ........................................................ 190
COBOL tag, SetJ ................................................................. 254
COBOL tag, Verify ............................................................. 255
COBOL tips .......................................................................... 77
COBOL, compiler choice .................................................... 249
COBOL, tagging changes ............................................. 78, 252
Cobolx, Set Lang ................................................... 78, 223, 252
Cobx tags
Change ............................................................................ 112
Colcopy ........................................................................... 116
Colmove .......................................................................... 119
Code, Set Keep .................................................................... 219
Cognos ................................................................................... 75
Colcopy command............................................................... 115
Colmove command ............................................................. 118
colon for MPE commands ............................................. 96, 352
Colonreq, Set Limit ............................................................. 225
column changes ................................................................... 113
column editing ..................................................................... 199
column range in list ............................................................. 156
column, definition of ........................................................... 332
columns
copy ................................................................................. 115
move................................................................................ 118
columns in COBOL source ................................................... 77
columns of display memory .................................................. 51
columns, copying ................................................................ 199
columns, moving ................................................................... 87
columns, removing .............................................................. 113
Columns, Set Term option .................................................. 234
columns, shifting ........................................................... 87, 113
Com interface procedure ..................................................... 311
Com Name error .................................................................. 293
combining commands ................................................... 94, 352
comma means a list ............................................................. 353
command file restriction...................................................... 285
command file, exiting .......................................................... 201
command files ............................................................... 96, 285
command files and UDCs ................................................... 192
command files, exiting ........................................................ 132
command files, looping ....................................................... 275
command files, Reflection..................................................... 59
Command Interpreter .......................................................... 296
command names .................................................................. 333
commands.............................................................................. 93
comments in commands ........................................................ 94
communication area .................................................... 313, 315
Compare UDC ..................................................................... 319
Compare/iX program....................................................... 3, 319
Compare/iX, installation ....................................................... 10
Compatibility, HP-UX 11.x .................................................. 17
Compile command .............................................................. 121
compile errors, trapping of .................................................... 73
Qedit 5.9 for HP e3000 User Manual
compiler fixes, CM................................................................ 11
compiler fixes, NM ............................................................... 10
compiler problems ............................................................... 299
compilers, isolated copy ...................................................... 209
compilers, location of .......................................................... 249
compiles in DS priority ......................................................... 43
compiling, NM ...................................................................... 11
completion codes ................................................................... 61
Comppri limit command ....................................................... 43
compressing files ................................................................. 139
Compudc.Catalog.Robelle .................................................. 319
conditional logic .................................................................. 143
configuring full-screen mode .............................................. 244
configuring Qedit .......................................................... 42, 207
configuring Spell ................................................................. 258
configuring Visual ............................................................... 238
Confirm deletion ................................................................. 124
console messages .................................................................. 56
console, recovering after ^B................................................ 174
Continue command ............................................................. 257
Continue, automatic ............................................................ 211
control characters .................................................... 4, 212, 333
control codes for editing.............................................. 173, 175
Control-A codes, TAE ........................................................ 246
Control-B on the console .................................................... 174
Control-S to pause ............................................................... 159
Control-Y and NM compiles ............................................... 300
Control-Y during compile ................................................... 122
Control-Y interrupt in Proc ................................................. 316
Control-Y to stop a command ....................................... 95, 159
Control-Y to stop a program ................................................. 67
Control-Y to undelete ............................................................ 39
conventions ............................................................................. 4
Copy command ................................................................... 101
Copycol command file ........................................................ 199
copying a block of text .......................................................... 25
copying a file into Qedit ...................................................... 262
copying columns ................................................................. 199
copying from a file .............................................................. 103
copying lines ....................................................................... 101
copying text in Visual ........................................................... 24
Copylib file (KSAM) .......................................................... 121
Copylib members .......................................... 78, 161, 264, 334
CPU time ............................................................................. 232
crash recovery ..................................................................... 184
Create error.......................................................................... 293
create new file, Info= ............................................................ 47
creating columns ................................................................. 113
CRT model JCW ................................................................... 49
CRT width JCW .................................................................... 51
CRT, definition of ............................................................... 334
curly braces { }.................................................................... 351
current line, definition of..................................................... 334
current line, position on screen ........................................... 239
cursor movement ................................................................... 20
cut-and-paste ......................................................................... 24
cut-and-paste between files ............................................. 26, 29
Cutcurrent, Set Visual option .............................................. 240
Qedit Glossary • 359
D
E
data files ................................................................................ 87
data files, texting ................................................................. 265
Data, Set Lang ..................................................................... 223
DC1 ....................................................................................... 51
DD cut-and-paste (delete) ..................................................... 24
deallocate needed .................................................................... 8
Debug software in MPE ...................................................... 289
Decimal, Set .................................................................. 30, 212
default answers ........................................................................ 4
default COBOL tag ............................................................. 254
default text formatting, Justify ............................................ 147
defaults .......................................................................... 42, 334
Defer, Set Open option ........................................................ 228
deferred write access ................................................... 183, 228
Delete
confirm ............................................................................ 124
Delete command ............................................................ 39, 124
delete, ask approval ............................................................. 211
deleting a block in Visual ...................................................... 24
deleting blank lines...................................................... 125, 340
deleting characters ............................................................... 174
delimiters ............................................................... 29, 111, 344
DeskQed.Qlibdata.Robelle file ............................................. 66
DESKQEDPARM JCW ........................................................ 66
DESKQEDVISUAL JCW..................................................... 66
Destroy command ............................................................... 126
Device option ...................................................................... 159
dictionary, Spell .................................................................... 10
dirty flag .............................................................................. 260
dirty workfile ............................................................... 150, 151
disc output, List command .................................................. 166
disc space, MPE/iX ....................................................... 64, 277
disc space, saving .................................................................. 12
Discard changes? on exit ....................................................... 45
Display command ................................................................ 127
display enhancement, cut-and-paste ...................................... 25
display width
Visual .............................................................................. 274
display width in Line mode ................................................. 234
displaying files .................................................................... 155
Divide command ................................................................. 128
divide function (VV), Visual ................................................. 26
divide function, Modify....................................................... 174
DL space .............................................................. 310, 313, 315
DL, Set ................................................................................ 212
Do command ....................................................................... 129
dot-dot-dot … .......................................................................... 4
Double option, double-spacing ................................... 158, 164
double-sided printing, LaserJet ........................................... 156
Down procedure .................................................................. 189
downshifting lines ............................................................... 189
DS priority ............................................................................. 43
DS priority, forcing into ........................................................ 67
Duplex $-option, List .......................................................... 156
duplex printing .................................................................... 164
duplicate file name error ..................................................... 151
Ederr User Command ............................................................ 73
edit several files at once ................................................ 42, 264
Editerr program ............................................................. 78, 130
Editerror command.................................... 73, 78, 80, 130, 307
editing columns ................................................................... 199
editing the text, Visual .......................................................... 20
Editinput, Set ................................................................. 20, 101
Editonopen, Set Visual option............................................. 241
Editor interface .................................................................... 310
Else command ..................................................................... 143
Elseif command ................................................................... 143
embedded words.................................................................. 112
Empty error ......................................................................... 293
Endfile command ................................................................ 109
Endif command ................................................................... 143
end-of-line ........................................................................... 326
Endwhile command ............................................................. 275
EOF In error ........................................................................ 293
EOF on $stdin ..................................................................... 204
EOF versus LIMIT, MPE/iX................................................. 64
equal sign ............................................................................ 332
Equals error ......................................................................... 293
error abort, override ............................................................ 211
Error Already ...................................................... 100, 103, 198
Error Full ............................................................................. 139
Error in Visual CRT read error ........................................... 299
Error in Visual Cut-and-paste ............................................. 298
Error in Visual Define string ............................................... 297
Error in Visual File full ....................................................... 299
Error in Visual No update ................................................... 298
Error in Visual Not enough lines ........................................ 297
Error in Visual Parameters .................................................. 297
error log ................................................................................. 57
error messages ............................................................. 293, 297
error messages, suppress ............................................. 281, 287
error trapping, COBOL ......................................................... 78
error trapping, compilers ....................................................... 73
error-file .............................................................................. 130
error-file format ................................................................... 307
errors in Visual .................................................................... 296
Esc, Set Visual option ..................................................... 20, 90
escape character .................................................................. 329
escape character in Visual ....................................... 20, 90, 241
Escape command ................................................................. 132
escape sequences ................................................................. 212
escaped sequences in regular expressions ........................... 329
escaped sequences in replacement string ............................ 331
even margins, left and right ................................................. 146
even or odd number of pages .............................................. 156
exclude lines, full-screen ............................................... 27, 247
exclusive violation .............................................................. 184
executing commands in a file .............................................. 272
Exit command ..................................................................... 133
exit from UDC/command file ..................................... 132, 201
exit from Visual..................................................................... 23
Exit interface procedure ...................................................... 312
exit keystroke, Reflection...................................................... 62
exit with verify ...................................................................... 45
expanding a workfile ................................................... 139, 299
360 • Qedit Glossary
Qedit 5.9 for HP e3000 User Manual
Expandtabs, Set ................................................................... 213
extents, MPE/iX .................................................................... 64
Extentsize, Set ..................................................................... 213
external command process .................................................. 214
external files ........................................................................ 103
external files, definition of .................................................. 335
Extprog, Set ................................................................... 97, 214
Extra error ........................................................................... 293
F
F1 function key...................................................................... 22
F2 function key.............................................................. 22, 271
F3 function key...................................................................... 23
F4 function key...................................................................... 23
F5 function key.............................................................. 23, 106
F6 function key.............................................................. 23, 138
F7 function key.............................................................. 23, 167
F8 function key...................................................................... 23
Fantasia program ................................................................. 323
Fclose error .......................................................................... 293
Fcontrol error....................................................................... 294
Fgetinfo error....................................................................... 294
field separator in Visual (~) ................................................ 241
File equations ...................................................................... 151
file format, Jumbo ............................................... 223, 304, 337
file format, original ..................................................... 303, 304
file format, Wide-Jumbo ..................................... 223, 304, 337
file formats .......................................................................... 303
file full ......................................................................... 139, 299
file labels ............................................................................... 77
file name, definition of ........................................................ 335
file names, log ....................................................................... 57
File nearly full! .................................................................... 299
file size limits ........................................................................ 89
file timestamp ...................................................... 152, 184, 267
file type, override ................................................................ 266
file utility ............................................................................... 86
file, modification timestamp ....................................... 218, 228
Filename error ..................................................................... 294
Filename, Set ................................................................. 14, 214
files in UDCs ....................................................................... 109
files, minimum ...................................................................... 12
filling text, even left margin ................................................ 146
Find command ....................................................... 35, 134, 192
Findjunk procedure ..................................................... 190, 315
Findup command ................................................... 35, 136, 192
Firewall protocol ................................................................... 56
Fixccxl.Qeditjob.Robelle job .............................................. 300
Fopen error .......................................................................... 294
force disconnection ............................................................. 133
Force-80-Columns in Reflection ......................................... 247
Form command ................................................................... 137
form feed causing Return/Line feed ...................................... 61
Format, Justify ..................................................................... 146
formatting listings with Set List .......................................... 162
formatting text ..................................................................... 144
FORTRAN compile command............................................ 121
FORTRAN tips ..................................................................... 78
FORTRAN, 66 or 77 compiler ............................................ 249
FORTRAN, Set ................................................................... 215
Qedit 5.9 for HP e3000 User Manual
Forward command .............................................................. 138
Fread error ........................................................................... 294
Freaddir error ...................................................................... 294
FTN compile command....................................................... 121
Full error.............................................................................. 294
full file ......................................................................... 139, 299
full-screen after Open .......................................................... 241
full-screen editing.......................................... 17, 274, 336, 345
Full-screen on HP-UX 11.x................................................... 17
function key labels ................................................ 53, 243, 247
function key labels, saving .................................................. 244
function keys ................................................................... 22, 95
Fwrite error.................................................................. 294, 299
Fwritedir error ..................................................................... 294
G
G/H straps.............................................................................. 51
garbage collection ............................................................... 139
Garbage command .............................................................. 139
Gather command ......................................................... 102, 198
GG cut-and-paste (glue) ................................................ 27, 241
global space (user hooks) .................................................... 313
glossary ............................................................................... 331
Glue command .................................................................... 140
glue function (GG), Visual .................................................... 27
goof in modify ..................................................................... 173
group searches ....................................................................... 86
H
Halfbright
Set ................................................................................... 216
Halfbright, Set Vis option ................................................... 241
handshaking........................................................................... 51
header records ..................................................................... 265
Help command .............................................................. 39, 141
help, Qedit style .................................................................. 193
HFS file name ..................................................................... 335
HFS, Set .............................................................................. 215
HH cut-and-paste (hold) ........................................................ 24
Hidetags, Set Vis option ...................................................... 242
Hints, Set ............................................................................. 216
HJ cut-and-paste (hold-append) ............................................ 28
Hold command ............................................................ 103, 142
Hold file ................................................................ 28, 142, 336
Hold file, name substitution ................................................ 142
Hold file, replacing from ..................................................... 199
Hold file, size of .................................................................. 142
Hold0 file .................................................................... 103, 142
Hold0 file in Visual mode ..................................................... 28
holding programs, ask approval .......................................... 211
holding programs, restricting .............................................. 225
home line ............................................................................... 19
home line command, truncated ............................................. 32
home line commands............................................................. 29
home line not transmitted, error .......................................... 298
hooked version of Qedit (MPEX) ................................. 14, 209
hostprompt........................................................................... 242
Qedit Glossary • 361
how to run Qedit .................................................................... 41
HowMessy program ................................................................ 4
HowMessy, installation ......................................................... 10
HPDesk ................................................................................. 65
HPDesk program ................................................................... 47
Hpmodify editing, examples ............................................... 180
Hpmodify editing, reference ............................................... 179
Hpmodify, Set Modify option ..................................... 179, 226
HPMSGFENCE variable............................................. 281, 287
Hppath variable ..................................................... 64, 205, 285
Hppath, Set command ......................................................... 216
hpterm.......................................................................... 240, 242
hpterm emulator .................................................................... 49
HP-UX 11.x compatibility .................................................... 17
HP-UX and Visual .............................................................. 297
hyphenation ........................................................................... 85
I
I/O redirection ............................................. 280, 286, 353, 354
IBM files ..................................................................... 265, 266
If command ......................................................................... 143
ignore case in string search ................................................. 112
ignore line feed option......................................................... 242
ignoring case in string search .............................................. 343
illegal character errors ......................................................... 300
implicit commands ................................................................ 95
implicit hold ........................................................................ 142
implied Run ......................................................................... 205
In Use error.......................................................................... 294
Include file prefix character ................................................ 158
Include files ................................................................. 122, 158
Include files and Qedify ........................................................ 68
incorrect line numbers ......................................................... 265
increase size of workfile .............................................. 263, 299
Increment, Set.............................................................. 101, 216
indentation ........................................................................... 148
indenting a list of points ...................................................... 148
indenting line automatically ................................................ 100
Info= an empty file to fill ...................................................... 47
Info= can create new files ..................................................... 47
Info= commands only ........................................................... 48
Info= first file to edit ............................................................. 45
Info= only, Parm 128 ............................................................ 48
Info= parameter, Run .......................................................... 203
Info= running Qedit............................................................... 48
Info= temporary file .............................................................. 47
Info='-c cmdstring' ................................................................ 46
Info='-p parm value' .............................................................. 45
Init interface ........................................................................ 310
Insert Char ........................................................................... 243
inserting characters ........................................................ 36, 174
INSIDEQEDIT JCW ................................................... 192, 281
installation ............................................................................... 7
installation, isolated ............................................................... 12
installing NM compiler interface .......................................... 10
installing user interface ....................................................... 313
Insufficient System Resources .............................................. 64
integral CM compiler fixes ................................................... 11
Interactive, Set ............................................................... 43, 217
Interface command (lib=s) .................................................. 309
362 • Qedit Glossary
interface routines ................................................................. 189
InterfaceG command (lib=g) ............................................... 309
InterfaceP command (lib=p) ............................................... 309
interrupting a listing ............................................................ 159
isolated CM compiler fixes ............................................. 11, 12
J
J option ................................................................................ 336
JCWs that drive Qedit ..................................................... 49, 53
JCWs, substituting............................................................... 286
JJ cut-and-paste (justify) ....................................................... 28
job streams .................................................................... 89, 260
Join command ..................................................................... 103
joining lines ................................................... 27, 140, 145, 175
Jumbo files .......................................................... 223, 304, 337
jumping, List ....................................................... 106, 138, 271
justification breaks .............................................................. 149
Justify command ................................................................. 144
Justify on Prose files ............................................................. 85
justify, ask approval ............................................................ 211
Justify, Set ................................................................... 147, 217
K
KEA! Terminal emulator .................................................... 239
Keep command.............................................................. 40, 150
Keep file .............................................................................. 337
Keep, Set ............................................................................. 217
keyboard remapping .............................................................. 62
keyboard, Visual ................................................................... 20
Kill command ...................................................................... 154
L
Label, Set Keep ................................................................... 219
labels for function keys ......................................................... 53
language setting ................................................................... 310
Language warning ............................................................... 294
language, definition of ........................................................ 337
Language, Set ...................................................................... 222
LaserJet ............................................................................... 164
LaserJet, fonts and orientation ............................................ 164
leading spaces, removing .................................................... 145
left edge, floats in Justify .................................................... 147
left margin ..................................................................... 20, 337
Left, Justify ......................................................................... 145
Left, Set ............................................................................... 224
Length, Set .......................................................................... 224
Lib, Set ................................................................................ 224
Limit, Set Keep ................................................................... 219
limiting CM compile priority ................................................ 43
Limits, Set ........................................................................... 225
line count, last command....................................................... 97
line feeds missing ................................................................ 242
Line mode display width ..................................................... 234
line numbers, strange .................................................... 88, 265
line overflow ....................................................................... 251
Qedit 5.9 for HP e3000 User Manual
line printer ........................................................................... 155
Line range .............................................................................. 70
line, definition of ................................................................. 338
linenum ................................................................................ 144
Linenum error ...................................................................... 294
linenum, definition of .......................................................... 338
Lines option of List ............................................................. 163
lines processed, number of .................................................... 97
lines, length ......................................................................... 337
List command ................................................................ 34, 155
List command, $-options ..................................................... 156
list double-spaced ................................................................ 164
list of points, formatting ...................................................... 148
list without file name on page ............................................. 163
list without page numbers ................................................... 163
list without title ................................................................... 163
List, Set ....................................................................... 162, 225
listing big files ....................................................................... 89
listing column ranges .......................................................... 156
List-Jump ....................................................................... 35, 161
Listredo command ............................................................... 167
Listundo command .............................................................. 168
LJ, Set List option ............................................................... 162
Loadproc intrinsic ............................................................... 313
local COBOL tag ................................................................. 253
log file names ........................................................................ 57
log files .................................................................................. 56
log files, errors....................................................................... 56
logon sequence ...................................................................... 55
long lines ............................................................................. 100
looking at the file................................................................... 34
looping commands ...................................................... 275, 339
losing characters .................................................................... 88
LP listing ..................................................... 137, 155, 156, 159
LP Open error ...................................................................... 294
Lsort command .............................................................. 86, 169
M
Magnet, MPE/iX utility ....................................................... 322
Main.Spdata.Robelle dictionary .......................................... 258
margin, full-screen .............................................................. 274
Margin, Justify .................................................................... 147
Marginfixed
reset in Visual ................................................................. 243
margins ........................................................................ 224, 230
margins in Visual ................................................................ 253
margins, Add command .............................................. 101, 104
margins, copying lines......................................................... 102
margins, definition of .......................................................... 339
margins, moving lines ......................................................... 103
marking a block in Visual ..................................................... 24
marking a block of lines ...................................................... 279
Maxdata, Set ........................................................................ 226
Maxdata=............................................................................. 187
maximum line length ........................................................... 224
maximum words in user dictionary ..................................... 258
means multiple commands .................................................... 94
memory lock .................................................... 53, 95, 339, 347
memos, UDC ......................................................................... 83
menu processor ........................................................................ 3
Qedit 5.9 for HP e3000 User Manual
Merge command.................................................................. 170
merge horizontal.................................................................. 170
Merge-command
justified ........................................................................... 170
merging files........................................................................ 170
messages in UDCs............................................................... 127
metacharacters ..................................................................... 325
missing columns .................................................................. 265
missing line feeds ................................................................ 242
missing, invalid status line error ......................................... 298
MM cut-and-paste (move)..................................................... 24
modification timestamp ....................................................... 152
modification timestamp, erase ............................................ 220
Modify command .................................. 36, 100, 172, 227, 256
Modify command, user exit ................................................ 314
Modify error ........................................................................ 294
Modify, Set .......................................................................... 226
Modify, setting codes .......................................................... 227
moving cursor, Visual ........................................................... 20
moving files with Qedit ......................................................... 13
moving lines ........................................................................ 102
moving Qedit to a new account ............................................. 13
moving text in Visual ............................................................ 24
MPE commands ............................................................ 96, 339
MPE@V, installation ............................................................ 11
MPE/iX ............................................................................... 121
MPE/iX 4.0 compatibility ..................................................... 63
MPE/iX 5.0 ......................................................... 151, 263, 335
MPE/iX and Visual ............................................................. 296
MPE/iX compiling ................................................................ 63
MPE/iX disc space ........................................................ 64, 277
MPE/iX file system ............................................................... 63
MPE/iX implied run ............................................................ 205
MPE/iX installation ............................................................... 10
MPE/iX Run parameters ..................................................... 203
MPE/iX terminal configuration............................................. 64
MPEX and STREAMX ....................................................... 321
MPEX program (VESOFT) .......................................... 97, 214
MPEX search for a group of files ......................................... 86
MPEX-hooked version of Qedit............................................ 14
multiple copies, off-line listing ........................................... 166
multiple search strings......................................................... 342
N
Name option of List ............................................................ 163
Name, Set Keep ................................................................... 220
names of commands ............................................................ 333
native-mode compilers .................................................. 63, 121
Nearest, List command........................................................ 155
Neater procedure ......................................................... 190, 315
negated character class ........................................................ 328
Network Engine .................................................................. 323
New command .................................................................... 181
new extra scratch file ............................................................ 42
new features ............................................................................ 5
next line display .................................................................. 350
next page function ............................................................... 138
NM compiler interface, installing ......................................... 10
No Line error ....................................................................... 294
No Open error ..................................................................... 294
Qedit Glossary • 363
no prompt bit ....................................................................... 316
No Write error ..................................................................... 294
Nomatch window option ............................................. 340, 346
nonprinting characters ................................................. 101, 212
Nostop option, Run command ............................................. 203
Nuggets, MPE/iX utilities ................................................... 322
Num option of List .............................................................. 163
Num, Set Keep .................................................................... 220
number of lines processed ..................................................... 97
numbered files ..................................................................... 265
numerical expressions ......................................................... 288
O
off-line listing ...................................................................... 162
off-line listing, extra copies ................................................. 166
Omnidex .............................................................................. 319
Open command ............................................................. 40, 182
open stack ............................................................................ 183
Open, Set option .................................................................. 228
operations tool ....................................................................... 89
operator's console (Control-B) ............................................ 174
Option List .......................................................................... 283
Option Nobreak ................................................................... 283
Option Noerror .................................................................... 283
Option Nolist ....................................................................... 283
Option Norecursion ............................................................. 283
Option Nowarn .................................................................... 283
Option Recursion................................................................. 283
optional character ................................................................ 327
Overflow error ..................................................................... 294
overflow of screen buffer .................................................... 299
overlapped execution, Nostop ............................................. 203
overlapping columns
Colcopy ........................................................................... 116
Colmove .......................................................................... 119
overlapping lines in a rangelist............................................ 342
overwriting characters ................................................... 36, 173
P
-p parm value, Info= option .................................................. 45
page numbers, remove from listing ..................................... 163
Page option of List .............................................................. 162
paragraphs, start and stop .................................................... 149
Param error .......................................................................... 294
Paren error ........................................................................... 294
Parm 128, Info= only ............................................................ 48
Parm 512, single file edit....................................................... 46
Parm values to suspend or not ............................................... 47
Parm with Posix .................................................................... 44
Parm= for DeskQed............................................................... 66
Parm= values for Qedit ................................................... 44, 48
Pascal compile command .................................................... 121
Pascal compiler, stack overflow .................................... 79, 300
Pascal Robelle compiler ...................................................... 249
Pascal tips .............................................................................. 79
Pascal, $bigcompile$ option ................................................. 79
Pattern window ............................................................ 340, 346
364 • Qedit Glossary
Pattern, Set .......................................................................... 228
pattern-matching ................................................................. 340
patterns, not allowed in Change .......................................... 112
Pause command ................................................................... 186
pause during printout........................................................... 161
pausing for user ................................................................... 186
pausing listings .................................................................... 159
PC control from Qedit ........................................................... 62
PC control in batch .............................................................. 196
PC file transfers ..................................................................... 60
PC keyboards, Visual ............................................................ 22
PC version JCW .............................................................. 50, 59
PCL setting, List command ................................................. 164
PCLINK program .................................................................. 60
period, two spaces after ....................................................... 147
Permanent redo.................................................................... 229
Persistent redo ..................................................................... 229
PH, language ....................................................................... 222
phone line noise................................................................... 190
plabels ................................................................................. 313
Pmap listing ......................................................................... 187
POSIX ......................................................... 151, 233, 263, 335
POSIX commands ............................................................... 291
POSIX file names ................................................................ 215
Posix, parm ............................................................................ 44
PowerHouse ........................................................................ 320
PowerHouse command files .................................................. 75
PowerHouse subfiles ....................................................... 77, 89
PowerHouse, link to Qedit .................................................... 75
pre- versus post-space ................................................. 157, 160
prefix search ........................................................................ 276
Prep command ..................................................................... 187
Prep, Maxdata ..................................................................... 226
Prep, RL default .................................................................. 231
previous file ......................................................................... 348
previous line display ........................................................... 350
previous page function ........................................................ 106
primary scratch file ............................................................... 42
Printdoc program ..................................................................... 2
printer, attached to terminal ................................................ 162
printers................................................................................. 159
printing ................................................................................ 155
priority of compiles ....................................................... 43, 122
Priority warning .................................................................. 294
Priority, Set ......................................................................... 228
Proc command ............................................................. 189, 314
Proc error ............................................................................. 294
PROCedures ................................................................ 212, 340
Procspace parameter.................................... 310, 313, 315, 316
program files can be edited ................................................... 89
Prompt, Set .......................................................................... 229
Prose text formatter ....................................................... 85, 321
PRT command ....................................................................... 96
Purge command ................................................................... 126
Q
Q command ......................................................................... 191
Q.Robelle group, compilers .......................................... 11, 249
QCOMPCONYOFF JCW ................................................... 300
Qcompxl.Pub.Robelle ........................................................... 67
Qedit 5.9 for HP e3000 User Manual
Qcompxl.Qeditjob.Robelle job ............................................. 10
QCOMPXLBYPASS JCW ................................................. 300
QCOMPXLTRACE JCW ................................................... 299
Qcopy program .................................................................... 317
Qcterm ................................................................................... 19
Qcterm version ...................................................................... 50
Qedcrt file .................................................................... 196, 248
QEDCURWFILE variable .............................................. 54, 97
Qedhint.Help.Robelle .......................................................... 216
Qedify program ............................................................... 11, 12
Qedifying CM programs ....................................................... 67
Qedit as HPDesk editor ......................................................... 65
Qedit commands (in UDCs) ................................................ 192
Qedit commands in command files ..................................... 285
Qedit file formats ................................................................ 303
Qedit files, reading .............................................................. 204
Qedit for Windows logon sequence ...................................... 55
Qedit format of MPEX listf................................................. 322
Qedit version number .......................................................... 304
Qedit, workfile formats ....................................................... 303
qedit'useradd procedure ....................................................... 312
qedit'usercommand procedure ............................................. 311
qedit'userinit procedure ............................................... 310, 312
Qeditaccess routine ............................................... 67, 307, 317
Qedit-compatible software tools ......................................... 319
QEDITCOUNT JCW ............................................................ 97
Qeditj1 job stream ................................................................. 11
Qeditj1a job stream ............................................................... 12
Qeditmgr files ................................................ 42, 159, 208, 315
QEDITMGRTRACE JCW .................................................... 53
Qeditpm ............................................................................... 229
Qeditscr file ................................................................... 99, 341
Qeditscr, disabling ............................................................... 251
Qeditscr, saving it................................................................ 257
QEDPARMBITS JCW .............................................. 44, 53, 65
QEDPCERROR JCW ......................................................... 197
QEDPROMPTEDPWD variable........................................... 54
QEDSERVMODE JCW ........................................................ 56
QEDSTOREDPWD variable ................................................ 54
QEFILE variable ................................................................. 286
Qhelp command .................................................................. 193
Qhelp help system ............................................................... 321
Qinput option, Run command ....................................... 67, 204
QJ, Set List option ............................................................... 162
QLIB contributed library ......................................................... 3
QLIB programs, install.......................................................... 10
Qmap listing ........................................................................ 187
Qmap program............................................................. 187, 209
QNote UDC ........................................................................... 83
QOUT routine ..................................................................... 307
qscreen, recovery using ....................................................... 297
Qserver.Qeditjob stream........................................................ 56
quick help ............................................................................ 141
Quiet mode, reset in Visual ................................................. 243
Quiet option ......................................................................... 341
quit with param=111 ........................................................... 312
quit with param=112 ........................................................... 310
quit with param=113 ........................................................... 311
QUIZ inside Qedit ................................................................. 75
quote characters ..................................................................... 29
quotes means string ............................................................. 354
quotes, alternate ................................................................... 111
Qedit 5.9 for HP e3000 User Manual
Qzmodify............................................................................. 175
Qzmodify, Set Modify ........................................................ 227
R
random name for scratch file................................... 45, 47, 251
Range..................................................................................... 70
Range error .......................................................................... 294
range, definition of .............................................................. 341
rangelist ................................................................................. 34
rangelist in Justify command .............................................. 144
rangelist, definition of ......................................................... 342
rangelist, overlapping lines ................................................. 342
RCRTMODEL JCW ............................................................. 49
RCRTSTRAPSGH JCW ....................................................... 51
RCRTWIDTH JCW .............................................................. 51
read-only access .......................................................... 182, 262
record length, maximum ....................................................... 87
Record mode, List option ............................................ 156, 162
record size, variable-length files ......................................... 221
recovery from Reflection exit ............................................... 62
recovery of workfile ............................................................ 184
recovery using qscreen ........................................................ 297
Recovery warning ............................................................... 295
redirecting $stdin/$stdlist .................................................... 203
Redo command.................................................................... 194
Redo, Set ............................................................................. 229
Reflect command .......................................................... 62, 196
Reflection ...................................................................... 19, 320
Reflection and LaserJets ..................................................... 162
Reflection and Qedit ............................................................. 60
Reflection commands in Qedit ...................................... 62, 196
Reflection for Windows ...................................................... 162
Reflection Force-80-Columns ............................................. 247
Reflection keystrokes ............................................................ 21
Reflection version ........................................................... 50, 59
refresh line ............................................................................. 36
refresh the screen................................................................... 31
Regexp................................................................................. 346
regexp, anchors ................................................................... 326
regexp, backreferences ........................................................ 330
regexp, character class ........................................................ 327
regexp, character range ....................................................... 328
regexp, escape ..................................................................... 329
regexp, escaped replacement ............................................... 331
regexp, escaped sequences .................................................. 329
regexp, metacharacters ........................................................ 325
regexp, negated class ........................................................... 328
regexp, optional character ................................................... 327
regexp, repeating characters ................................................ 327
regexp, repeating class ........................................................ 328
regexp, single character ....................................................... 326
regexp, subpattern ............................................................... 330
Regular Expression ............................................................. 346
relative line numbers ........................................................... 343
remapping the keyboard ........................................................ 62
remote session ....................................................................... 43
removing columns ............................................................... 113
removing garbage from listings .......................................... 156
renaming workfile ............................................................... 257
Renumber command ........................................................... 198
Qedit Glossary • 365
renumber, automatic .................................................... 100, 243
renumbering ................................................................ 100, 198
repeating characters ............................................................. 327
repeating class ..................................................................... 328
Replace command ............................................................... 199
replacing words ..................................................................... 36
replicating a block in Visual.................................................. 24
re-read user dictionary ......................................................... 258
reset 700/9x terminal ........................................................... 297
reset cut-and-paste ................................................................. 25
reset Visual (Set Visual Stop) ....................................... 49, 245
reset ZZ ............................................................................... 279
restarting Modify on a line .................................................. 173
restore files .............................................................................. 8
restricting users ................................................................... 225
retain current line ................................................................ 240
Return command ................................................................. 201
Return means display next line ........................................... 350
right margin ......................................................................... 343
Colmove .......................................................................... 119
right margin in Visual ......................................................... 274
right margin, justify ............................................................. 147
Right margin, Visual ........................................................... 243
Right, Justify ....................................................................... 145
Right, Set ............................................................................. 230
RL, Set ................................................................................. 231
RLABELDEFAULT JCW ............................................ 53, 247
Robelle account ....................................................................... 8
Robelle, Set Mod option...................................................... 226
Robelle.Job.Robelle job .......................................................... 8
ROBMSGFENCE variable ......................................... 281, 287
ROBOT ............................................................................... 320
roll amount .......................................................................... 271
roll up function .................................................................... 271
Roman-8 characters ............................................... 20, 101, 213
Roman-8 versus ASCII ....................................................... 166
routines, user ............................................................... 309, 314
RPCVERSION JCW ....................................................... 50, 59
RPCVERSION, 132 columns ............................................. 246
RPG ....................................................................................... 80
RPG compile command ...................................................... 121
rpgxlgo .................................................................................. 81
rpgxllk ................................................................................... 81
RR cut-and-paste (replicate).................................................. 25
Run command ..................................................................... 202
Run, implied ........................................................................ 205
Run, lib= .............................................................................. 224
Run, restricting .................................................................... 225
running PowerHouse from Qedit .......................................... 75
running Qedit................................................................... 41, 53
running Qedit with Reflection ............................................... 59
S
save ........................................................................................ 40
Savecmdf.Qeditjob.Robelle job ............................................ 10
saving function keys ............................................................ 244
SCOMPARE and ANALYZER .......................................... 322
scratch file, primary, random name ....................................... 45
scratch file, random name ................................................... 251
screen layout, Visual ............................................................. 19
366 • Qedit Glossary
scrollup character, full-screen mode ................................... 245
searching for two strings at once ......................................... 111
searching for words ....................................................... 35, 276
Segmenter command ........................................................... 206
Select menu processor ............................................................. 3
Select, installation ................................................................. 10
Self-describing files ............................................................ 137
semicolon .............................................................................. 94
semicolon means multiple commands ................................ 352
server process ........................................................................ 55
Set command ....................................................................... 207
Set commands in Qeditmgr ................................................... 43
Set Open Defer .................................................................... 183
Set Visual command ........................................................... 238
Setcatalog command ........................................................... 236
Setincr, Text command ....................................................... 265
SetJ, Cobol tag .................................................................... 254
Setmsg, reset in Visual ........................................................ 243
several files, editing .............................................................. 42
Shift, Set .............................................................................. 231
shiftin character in Visual ..................................................... 20
ShiftIn characters in Visual ................................................. 244
shifting case (uppercase and lowercase) ..................... 189, 343
shifting columns .................................................................. 113
shifting listings to the right ................................................. 158
Shifting Output .................................................................... 157
shiftout character in Visual ............................................. 20, 90
shiftout characters in Visual .......................................... 90, 245
Shut command ............................................................... 40, 257
Shut, automatic purge.......................................................... 257
SI, Set Visual option ....................................................... 20, 90
single file edit, Parm 512 ...................................................... 46
Size error ............................................................................. 295
size of workfile .............................................................. 89, 344
skip on perforation ...................................................... 157, 160
Smart string matching ................................................. 112, 346
SO, Set Visual option ...................................................... 20, 90
son process ............................................................................ 98
sorting lines ................................................................... 86, 169
soundex search .................................................................... 276
spaces, preserve trailing ...................................................... 251
special characters ................................................................ 347
Spell command .................................................................... 258
Spell dictionary ................................................................... 232
Spell UDC ..................................................................... 84, 258
Spell, installation ................................................................... 10
Spell, Set ............................................................................. 231
Spell, spelling checker .................................................... 4, 321
spell-check one word........................................................... 276
spell-checking ....................................................................... 84
spelling, check rangelist ...................................................... 258
SPL ........................................................................................ 80
SPL compile command ....................................................... 121
Splash compiler ..................................................... 80, 130, 321
splice line bit ....................................................................... 316
splicing lines.................................................. 27, 140, 145, 175
split index word ................................................................... 313
split line bit .......................................................................... 316
splitting lines ......................................................... 26, 128, 174
spool files ...................................................... 90, 160, 264, 344
spuser local dictionary......................................................... 258
spuser user dictionary .......................................................... 232
Qedit 5.9 for HP e3000 User Manual
stack overflow in Pascal ................................................ 79, 300
Stack= .................................................................................. 187
Start and Stop, Justify options ............................................. 149
start-of-line .......................................................................... 326
status line ............................................................................... 19
Stdin= parameter, Run ........................................................ 203
Stdlist= parameter, Run ....................................................... 203
straight margins ................................................................... 146
Stream command ........................................................... 90, 260
STREAMX ............................................................................ 94
string delimiters ..................................................... 29, 232, 344
string delimiters in I/O redirection ...................................... 286
String error .......................................................................... 295
String range ........................................................................... 70
string replacement, Hpmodify ............................................. 179
string search............................................................. 29, 35, 249
strings, changing.................................................................. 110
strings, definition of ............................................................ 344
strings, maximum length ..................................................... 345
subpatterns ........................................................................... 330
Substitution, variable ........................................................... 237
Super Cartridge ................................................................... 166
suspended processes ........................................................ 8, 154
suspending Qedit ................................................... 47, 133, 233
symbol, Smart search .................................................. 112, 346
System SL ..................................................................... 11, 313
T
tab character ........................................................................ 265
tab character in Visual ......................................................... 245
tab characters in Visual ......................................................... 20
tab characters, editing ............................................................ 90
Tab, Set Visual option ..................................................... 20, 90
Tabs, Set ...................................................... 100, 233, 234, 345
tabs, whether to expand ....................................................... 213
TAE, Set Visual option ....................................................... 246
Target error .......................................................................... 295
TDP program ......................................................... 86, 261, 323
Tdpdraft command .............................................................. 261
Tdpfinal command .............................................................. 261
Telamon ............................................................................... 323
Tell messages in Visual ....................................................... 243
template ....................................................................... 161, 345
template line, Visual screen .................................................. 19
temporary files..................................................................... 220
temporary files, Info= ............................................................ 47
Term Columns, Set .............................................................. 234
terminal config, changing .................................................... 245
terminals supported by Visual ............................................. 297
terminating .......................................................................... 133
Text command ..................................................................... 262
Text command, building workfiles ..................................... 181
Text command, user labels .................................................. 251
Text into extra scratch file ..................................................... 42
text lines, Visual screen ......................................................... 19
text processing ....................................................................... 85
texting big files ...................................................................... 89
texting data files .................................................................. 265
texting with user labels .......................................................... 89
TextJ command ................................................................... 264
Qedit 5.9 for HP e3000 User Manual
tilde (~)
blank pattern ................................................................... 125
tilde (~), blank pattern ................................................. 249, 340
tilde (~), field separator ................................... 26, 27, 241, 356
tilde (~), most recent screen ................................................ 356
timestamp, file ..................................................................... 152
Title option of List .............................................................. 163
titles, listing without ............................................................ 163
Today command file ........................................................... 286
Too high error ..................................................................... 295
Totals, Set ............................................................................ 236
trace log ................................................................................. 57
tracing configuration files ..................................................... 53
trailing spaces
Colcopy ........................................................................... 115
Colmove .......................................................................... 118
trailing spaces, preserve ...................................................... 251
TRANSACT .................................................................. 80, 321
Transmit pacing required on XL ........................................... 64
trapping compile errors ................................................... 73, 78
trial users ................................................................................. 7
truncated home line ............................................................... 32
two spaces at end of sentence.............................................. 147
two-column listings ............................................................. 165
two-sided printing ............................................................... 164
Type Ahead Engine ............................................. 176, 178, 248
typeahead codes, suppressing.............................................. 246
typeahead, Reflection and Visual .......................................... 61
U
UDCs, see User Defined Commands .................................. 236
undefined control codes ...................................................... 213
Undelete ........................................................................ 39, 124
Undo command ..................................................... 39, 168, 269
Undo edit, Hpmodify .......................................................... 179
Undo in Visual mode .................................................... 31, 269
Undo, Set ............................................................................. 237
UNN option in Qedit ............................................................. 88
unnumbered files ................................................................. 220
unprintable characters ......................................................... 212
Unresolved External Reference........................................... 300
Unresolved externals ............................................................. 63
Unsat= parameter, Run........................................................ 203
Up command ....................................................................... 271
up lines (|) ................................................................................ 4
Up procedure ....................................................................... 189
updating Visual screen ........................................................ 246
uppercase versus lowercase........................................... 93, 343
Upshift window option ........................................ 340, 343, 346
upshifting lines .................................................................... 189
Use command ...................................................................... 272
usefiles, allow If logic ......................................................... 143
usefiles, searching ............................................................... 158
User Defined Commands .............................. 96, 236, 280, 345
User Defined Commands, exiting ............................... 132, 201
User Defined Commands, Qedit commands in ................... 192
User Defined Commands, Set ............................................. 236
user dictionary ............................................................. 232, 258
user interface, installation ................................................... 313
user labels .............................................................. 89, 265, 307
Qedit Glossary • 367
user labels, retaining ............................................................ 251
user procedures .................................................................... 309
user procedures, wide lines ................................................. 309
Userspace parameter ........................................................... 310
V
Var, Set Keep ...................................................................... 221
Variable substitution ........................................................... 237
variable-length files ............................................................. 221
variables in command files .................................................. 286
variables in UDCs ............................................................... 282
Varsub, Set .......................................................................... 237
Vemodify, now Qzmodify........................................... 175, 227
Verify command .................................................................. 273
Verify, Cobol tag ................................................................. 255
VESOFT ........................................................................ 94, 321
Visual and 700/9x................................................................ 297
Visual command .................................................. 274, 336, 345
Visual error messages.......................................................... 297
Visual mode, saving function keys ..................................... 244
Visual mode, startup .............................................................. 18
Visual, configuring .............................................................. 238
Visual, Set ........................................................................... 238
VV cut-and-paste (divide) ............................................. 26, 241
W
waiting, timed ...................................................................... 186
wall time .............................................................................. 232
warning messages ................................................................ 293
warning messages, suppress ........................................ 281, 287
warnings .............................................................................. 248
what you see is what you get............................................... 227
Whichcomp, Set .......................................................... 122, 248
While command .......................................................... 275, 339
wide lines in user procedures .............................................. 309
Wide-Jumbo files ................................................................ 337
Wide-Jumbo, create ............................................................. 181
Wide-Jumbo, workfile size ................................................. 250
Widen, Set Visual option .................................................... 246
width of display memory....................................................... 51
width, display in Visual....................................................... 274
window ........................................................................ 111, 340
Window error ...................................................................... 295
368 • Qedit Glossary
window, definition of .......................................................... 346
Window, Set ........................................................................ 249
windows and Change .......................................................... 111
Withindent, Justify .............................................................. 148
word processing .................................................................. 144
word processor ...................................................................... 83
Words command ................................................................. 276
wordwrap, Visual ................................................................ 247
Work, Set............................................................. 181, 250, 263
workfile ......................................................................... 60, 181
workfile format.................................................................... 303
workfile format, override .................................................... 266
workfile size ........................................................................ 250
workfile, definition of ......................................................... 347
Workspace parameter .................................................. 310, 312
Wraparound, Set .......................................................... 100, 251
write access, deferred .......................................................... 228
X
X, Set ..................................................................... 78, 223, 252
X, Set Global ....................................................................... 254
X, Set Local ......................................................................... 253
X.25 networks ............................................................... 52, 296
XDB symbolic debug on XL................................................. 63
XL= parameter, Run............................................................ 203
Xltrim command ........................................................... 64, 277
Xon/Xoff pacing required on XL .......................................... 64
Xpedit full-screen editor ..................................................... 322
Xpedit, installation ................................................................ 10
XX cut-and-paste (exclude) .................................................. 27
XX, Visual........................................................................... 247
Y
YNone, Set .......................................................................... 255
Z
Zave command .................................................................... 278
Zip, Set ................................................................................ 255
ZZ command ....................................................................... 279
ZZ cut-and-paste (mark) ....................................................... 28
Qedit 5.9 for HP e3000 User Manual
Qedit 5.9 for HP e3000 User Manual
Qedit Glossary • 369
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 383 PDF Version : 1.4 Title : Microsoft Word - qedit.doc Producer : Mac OS X 10.9.1 Quartz PDFContext Creator : Word Create Date : 2014:01:27 16:28:58Z Modify Date : 2014:01:27 16:28:58ZEXIF Metadata provided by EXIF.tools