Robot Instructions

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadRobot-instructions
Open PDF In BrowserView PDF
CSCE 236 Embedded Systems
Robot Building Instructions
Carrick Detweiler, Computer Science and Engineering
Here are some pictures and basic instructions for building the Arduino-based robot for this course. Below
is an image of the final robot. You are free to design your robot differently, however, please avoid doing
anything that will damage or permanently modify the components (e.g. do not use glue, don’t use the double
sided tape on the bottom of the breadboard, etc).

Use the two plastic screws to secure the Arduino to the base. You will have to find holes that align
properly, although the Arduino will likely end up at a slight angle. Then secure the servos by using a ziptie
on each servo (you should check alignment and placement of all parts before putting the zipties through,
since once you attach them you cannot undo them).

1

Here is a view of the robot from the bottom. One key to securing the servos is making sure that the
backs of the servos are touching and that the zipties are on the wheel sides of the servo flanges. You should
attach the caster at the back of the robot. Insert the spacers to lift the back of the robot up slightly higher.

Use another ziptie to secure the breadboard to the base. Once you have completed assembly, you can
route some wires under the base to better organize them.

Your goal should be to make your robot look better than mine. And feel free to innovate!

2
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Page Mode                       : UseOutlines
Author                          : 
Title                           : 
Subject                         : 
Creator                         : LaTeX with hyperref package
Producer                        : pdfTeX-1.40.14
Create Date                     : 2016:02:29 20:43:11-06:00
Modify Date                     : 2016:02:29 20:43:11-06:00
Trapped                         : False
PTEX Fullbanner                 : This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013) kpathsea version 6.1.1
EXIF Metadata provided by EXIF.tools

Navigation menu