Software Programming Guide For ATWINC1500 Wi Fi Using SAM D21 Xplained Pro Wifi Samd21 Userguide
User Manual:
Open the PDF directly: View PDF
Page Count: 82
- Introduction
- Prerequisites
- Icon Key Identifiers
- 1 How the Examples are organized
- 2 Source Organization
- 3 Basic Operation Code
- 4 Examples
- 4.1 Basic Example: How to Get Chip ID
- 4.2 Basic Example: How to Set Debug Level
- 4.3 Basic Example: How to Get MAC Address
- 4.4 Basic Example: How to Run STA Mode
- 4.5 Basic Example: How to Run AP Mode
- 4.6 Basic Example: How to Run P2P Mode
- 4.7 Basic Example: How to Change Mode
- 4.8 Basic Example: How to Scan APs
- 4.9 Basic Example: How to Set Deep Sleep
- 4.10 Basic Example: Security with WEP/WPA
- 4.11 Basic Example: Connection to Enterprise Security Network
- 4.12 Basic Example: Connection to Security WPS
- 4.13 Basic Example: How to Set Packet Monitoring
- 4.14 Basic Example: Get Signal Status
- 4.15 Basic Example: AP Provision
- 4.16 Basic Example: HTTP Provision
- 4.17 Protocol Example: UDP (Server and Client)
- 4.18 Protocol Example: UDP Client
- 4.19 Protocol Example: UDP Server
- 4.20 Protocol Example: TCP Client
- 4.21 Protocol Example: TCP Server
- 4.22 Protocol Example: NTP Time Client
- 4.23 Protocol Example: SMTP Send Email
- 4.24 Protocol Example: Location Client
- 4.25 Advanced Example: Growl Notification
- 4.26 Advanced Example: MQTT Chat
- 4.27 Advanced Example: Weather Client
- 4.28 Advanced Example: Wi-Fi Serial
- 4.29 Advanced Example: OTA Firmware Upgrade
- 4.30 Advanced Example: SSL connection
- 5 Conclusion
- 6 Revision History