Intel® Solid State Drive Pro 2500 Series Product Specification, 2.5 Inch Ssd Sata Specification
User Manual: Pro 2500
Open the PDF directly: View PDF 
.
Page Count: 31
| Download | |
| Open PDF In Browser | View PDF |
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Product Specification
Capacities:
Form
120GB, 180GB, 240GB, 360GB, 480GB
Factors: 2.5-inch
Thickness:
Weight:
7 mm
Up to 78 grams
SATA
6Gb/s Bandwidth Performance
(Iometer* Queue Depth 32)
1
Sustained Sequential Read: up to 540MB/s
Sustained Sequential Write: up to 490MB/s
and Write IOPS1
(Iometer Queue Depth 32)
Read
Power
Management
5.0 V SATA Supply Rail
SATA Link Power Management (LPM)
Advanced Power Management (APM)
Device Sleep (DevSleep)
Power
Active (BAPCo MobileMark* 2007 Workload):
165 mW
Idle3: 55 mW
DevSleep: 5 mW
Temperature
Random 4KB Reads: up to 48,000 IOPS
Random 4KB Writes: up to 80,000 IOPS2
Operating4: 0o C to 70o C
Compression
Non-Operating: -55o C to 95o C
Data
End-to-End
Intel®
Data Protection
Stable Image Platform Program (SIPP)
Security
and Manageability Compatibility
Intel® Core™ vPro™ Processor
Intel® Setup and Configuration Software
(Intel® SCS)
AES 256-bit Encryption
Trusted Computing Group* (TCG*) Opal Security
Subsystem Class (SSC) Specification Version 2.0
features
Windows eDrive*
Additional
Compatibility
Intel® SSD Toolbox with Intel® SSD Optimizer
Intel® Data Migration Software
Intel® Rapid Storage Technology
SATA Revision 3.2
ACS-3 (ATA/ATAPI Command Set 3)
SSD Enhanced SMART ATA feature set
Intel® Dynamic Platform Thermal Framework
(Intel® DPTF)
Reliability
—
Uncorrectable Bit Error Rate (UBER):
<1 sector per 1016 bits read
—
Mean Time Between Failure (MTBF):
1.2 million hours
—
Shock (operating and non-operating):
1,500 G/0.5 ms
Vibration
—
Operating: 2.17 GRMS (5-700Hz)
—
Non-operating: 3.13 GRMS (5-800Hz)
Certifications
and Declarations:
UL*
CE*
C-Tick*
BSMI*
KCC*
Microsoft* WHCK
VCCI*
SATA-IO*
Product
Ecological Compliance
RoHS*
NOTES:
1.
2.
3.
4.
Performance values vary by capacity.
Random 4KB writes measured using out-of-box SSD.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the system for maintaining proper
device operating temperatures on heavier workloads.
Order Number: 330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Ordering Information
Contact your local Intel sales representative for ordering information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND
CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death.
SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL
AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST
ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF
PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT
INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or
characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without
notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
This document contains information on products in the design phase of development.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800548-4725, or go to: http://www.intel.com/design/literature.html
Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as
purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements. The
replacement of halogenated flame retardants and/or PVC may not be better for the environment.
No computer system can provide absolute security under all conditions. Built-in security features available on select Intel® Solid State Drives may
require additional software, hardware, services and/or an Internet connection. Software and workloads used in performance tests may have been
optimized for performance only on Intel microprocessors. Performance tests are measured using specific computer systems, components,
software, operations and functions. Any change to any of those factors may cause the results to vary. You should consult other information and
performance tests to assist you in fully evaluating your contemplated purchases, including the performance of that product when combined with
other products. Consult your system manufacturer for more details.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2014 Intel Corporation. All rights reserved.
Product Specification
2
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Contents
1
Introduction ................................................................................................................................................................... 5
1.1
1.2
1.3
Revision History ........................................................................................................................................................................................... 6
Terminology .................................................................................................................................................................................................. 6
Reference Documents ............................................................................................................................................................................... 7
2
Product Specifications ................................................................................................................................................. 8
2.1
2.2
2.3
2.4
2.5
2.6
2.7
Capacity ........................................................................................................................................................................................................... 8
Performance .................................................................................................................................................................................................. 8
Electrical Characteristics .......................................................................................................................................................................... 9
Environmental Conditions ................................................................................................................................................................... 10
Product Regulatory Compliance ....................................................................................................................................................... 11
Reliability ...................................................................................................................................................................................................... 12
Hot Plug Support ...................................................................................................................................................................................... 12
3
Mechanical Information ............................................................................................................................................ 13
4
Pin and Signal Descriptions...................................................................................................................................... 14
4.1
4.2
4.3
Pin Locations .............................................................................................................................................................................................. 14
Signal Descriptions .................................................................................................................................................................................. 14
4.2.1
Connector Pin Signal Definitions ................................................................................................................................ 14
4.2.2
Power Pin Signal Definitions ......................................................................................................................................... 15
Device Sleep Feature .............................................................................................................................................................................. 15
5
Supported Command and Feature Sets ................................................................................................................. 16
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
Supported ATA General Feature Command Set........................................................................................................................ 16
Advanced Power Management (APM) ............................................................................................................................................ 19
Security ......................................................................................................................................................................................................... 19
5.3.1
Sanitization Methods ........................................................................................................................................................ 19
5.3.2
TCG* Opal SSC Support .................................................................................................................................................. 20
5.3.3
Windows eDrive* ................................................................................................................................................................ 20
Device Statistics ........................................................................................................................................................................................ 20
Software Settings Preservation ......................................................................................................................................................... 21
DevSleep ...................................................................................................................................................................................................... 22
SMART Command Transport .............................................................................................................................................................. 22
SMART Attributes ..................................................................................................................................................................................... 23
SMART Logs ................................................................................................................................................................................................ 25
6
Certifications and Declarations ............................................................................................................................... 26
7
Appendix ...................................................................................................................................................................... 27
7.1
7.2
Identify Device ........................................................................................................................................................................................... 27
Models ........................................................................................................................................................................................................... 31
October 2016
330711-002US
Product Specification
3
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Tables
Table 1:
Table 2:
Table 3:
Table 4:
Table 5:
Table 6:
Table 7:
Table 8:
Table 9:
Table 10:
Table 11:
Table 12:
Table 13:
Table 14:
Table 15:
Table 16:
Table 17:
Table 18:
Table 19:
Table 20:
Table 21:
Table 22:
Table 23:
Table 24:
Table 25:
Table 26:
Terminology ............................................................................................................................................................................. 6
Standard References ........................................................................................................................................................... 7
User Addressable Sectors ................................................................................................................................................. 8
Compressible Performance .............................................................................................................................................. 8
Incompressible Performance........................................................................................................................................... 8
Latency ....................................................................................................................................................................................... 9
Operating Voltage and Power Consumption ........................................................................................................... 9
Temperature, Shock, Vibration .................................................................................................................................... 10
Product Regulatory Compliance Specifications ................................................................................................... 11
Reliability Specifications ................................................................................................................................................. 12
Serial ATA Connector Pin Definitions ....................................................................................................................... 14
Serial ATA Power Pin Definitions ................................................................................................................................ 15
Supported ATA Commands and Feature Sets ...................................................................................................... 16
APM Subcommand Codes for Power Management and Definitions .......................................................... 19
APM Subcommand Codes for Thermal Power Management and Definitions ....................................... 19
Supported Secure Erase Modes and Definitions ................................................................................................. 19
Supported Sanitize Device Modes and Definitions ............................................................................................ 19
ID Device Changes with Opal Activation .................................................................................................................. 20
Device Statistics Log ......................................................................................................................................................... 21
Preserved Software Settings ......................................................................................................................................... 21
DevSleep Control Parameters ...................................................................................................................................... 22
SMART Attributes ............................................................................................................................................................... 23
SMART Attribute Status Flags ...................................................................................................................................... 25
Device Certifications and Declarations ..................................................................................................................... 26
Identify Device Returned Sector Data ....................................................................................................................... 27
Available Models ................................................................................................................................................................ 31
Figures
Figure 1:
Figure 2:
Product Specification
4
Dimensions for Full Size 2.5-inch Drives ................................................................................................................. 13
Layout of Signal and Power Segment Pins............................................................................................................. 14
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
1
Introduction
This document describes the specifications and capabilities of the Intel® Solid-State Drive Pro 2500 Series (Intel®
SSD Pro 2500 Series).
The Intel SSD Pro 2500 Series delivers the next generation of Professional storage solution with enhanced security
and manageability features, power-efficient performance, and lower total cost of ownership. The latest generation
of the Intel® SSD Professional Family supports Trusted Computing Group* (TCG*) Opal version 2.0 features and is
Microsoft eDrive* capable, although “off” is the eDrive factory default out-of-box setting. The industry-standard
thin 7mm 2.5-inch form factor is interchangeable with existing SATA hard disk drives (HDDs). In addition, Intel’s
proven reliability and low power consumption provide an enhanced mobile experience.
Intel SSD Pro 2500 Series also offers the following additional key features:
Security and Manageability Features
Intel SSD Pro 2500 Series is a hardware-based self-encrypting drive (SED) enhanced with Opal 2.0* security
features. The TCG Opal specification describes a secure boot capability (pre-boot authentication), protection for
user data, and administrative capabilities, improving security of critical data at rest. Manageability options are
expanded when the Intel SSD Pro 2500 Series is coupled with the latest Intel® Core™ vPro™ processor systems and
software such as Intel® Set-up & Configuration Service (Intel® SCS) with the Intel® SSD Pro Plug-in. Offering unique
manageability options, IT Administrators can proactively manage the Intel® Solid-State Drive Professional Family
and reduce deployment costs while keeping their PCs running smoothly.
Quality and Reliability Capabilities
Quality and reliability are the cornerstones of Intel® SSD Products and the Intel SSD Pro 2500 is no different.
Limiting employee down-time is critical; the reliability of the Intel SSD Pro 2500 Series is key for Low Total Cost
of Ownership (TCO).
Power-Efficient Performance
The new advanced low power modes enable longer battery life and greater mobility. In addition, the Intel SSD Pro
2500 Series provides higher performance throughput for the most demanding workloads.
Stability
Intel SSD Pro 2500 Series is part of the Intel® Stable Image Platform Program (Intel® SIPP). Intel SIPP aligns key Intel
platform components, enabling a predictable transition from one technology generation to the next with minimal
compatibility issues. Enhancing software and hardware stability, Intel SIPP aligns with key Intel platform
components and drivers and is currently available for at least 15 months post platform Intel SIPP availability.
Tools
Intel SSD Pro 2500 Series is aligned with the latest version of the Intel® SSD Toolbox for consumers and the Intel®
SSD Pro Administrator Tool for business and IT professionals. Intel tools provide key capabilities to maximize your
Intel SSD experience. (Visit www.intel.com/ssd to access the Tools panel for download.)
October 2016
330711-002US
Product Specification
5
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
1.1
Revision History
Revision Number
Description
Revision Date
001
Initial release
002
Corrected wording in Section 5.3.2 from FIPS 197 certified to FIPS
197 compliant
1.2
July 2014
October 2016
Terminology
Table 1:
Terminology
Term
Description
AHCI*
Advanced Host Controller Interface
APM
Advanced Power Management
ATA
Advanced Technology Attachment
DAS
Device Activity Signal
DevSleep
Device Sleep
DIPM
Device Initiated Power Management
DMA
Direct Memory Access
DPTF
Dynamic Platform Thermal Framework
eDrive
Microsoft* specification for a drive that complies to the TCG Opal 2.0 and IEEE 1667* standards
EXT
Extended
FPDMA
First Party Direct Memory Access
GB
Gigabyte (1,000,000,000 bytes)
Note: The total usable capacity of the SSD may be less than the total physical capacity because a small
portion of the capacity is used for NAND flash management and maintenance purposes.
HDD
Hard Disk Drive
HIPM
Host Initiated Power Management
I/O
Input/Output
IOPS
Input/Output Operations Per Second
KB
Kilobyte (1,024 bytes)
LBA
Logical Block Address
Locking SP
Locking Security Provider
LPM
Link Power Management
MB
Megabyte (1,000,000 bytes)
MLC
Multi-level Cell
MTBF
Mean Time Between Failures
NCQ
Native Command Queuing
Product Specification
6
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Term
Description
NOP
No Operation
Opal
A Trusted Computing Group (TCG) standard that defines an interface for managing a
Self-Encrypting Drive (SED).
PIO
Programmed Input/Output
PSID
Physical Security ID, public drive-unique value
RDT
Reliability Demonstration Test
RMS
Root Mean Squared
SATA
Serial Advanced Technology Attachment
SED
Self-Encrypting Drive
SMART
Self-Monitoring, Analysis and Reporting Technology
SSD
Solid-State Drive
TCG
Trusted Computing Group
TYP
Typical
UBER
Uncorrectable Bit Error Rate
1.3
Table 2:
Reference Documents
Standard References
Date or Rev. #
Title
Location
May 2005
SFF-8201, 2.5-inch drive form factor
http://www.sffcommittee.org/
May 2006
SFF-8223, 2.5-inch Drive w/Serial Attachment
Connector
http://www.sffcommittee.org/
Sept 2008
IEC 55022 Information Technology Equipment —
Radio disturbance Characteristics— Limits and
methods of measurement CISPR22:2008 (Modified)
http://www.iec.ch/
Dec 2008
VCCI
http://www.vcci.jp/vcci_e/
June 2009
RoHS
http://qdms.intel.com/
Click Search MDDS Database and search
for material description datasheet
August 2010
IEC 55024 Information Technology Equipment —
Immunity characteristics— Limits and methods of
measurement CISPR24:2010
http://www.iec.ch/
Sept 2010
Solid-State Drive (SSD) Requirements and
Endurance Test Method (JESD218)
http://www.jedec.org/standardsdocuments/docs/jesd218/
February 2012
TCG Opal Specification Version 2.0 rev 1.0
http://www.trustedcomputinggroup.com/
August 2013
Serial ATA Revision 3.2
http://www.sata-io.org/
October 2013
ACS-3 Specification
http://www.t13.org/
October 2016
330711-002US
Product Specification
7
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
2
Product Specifications
2.1
Capacity
Table 3:
2.2
User Addressable Sectors
Capacity
Unformatted Capacity (Total User Addressable Sectors in LBA mode)
120GB
234,441,648
180GB
351,651,888
240GB
468,862,128
360GB
703,282,608
480GB
937,703,088
Performance
Table 4:
Compressible Performance
Specification
Random
4KB Read
(up to)1
IOPS
Random
4KB Write
(up to)2
IOPS
Random
4KB Write
(TYP)1
IOPS
120GB
24,000
80,000
37,500
180GB
41,000
80,000
240GB
41,000
360GB
45,000
480GB
48,000
Capacity
1.
2.
Table 5:
Sequential
128KB Read1
Sequential
128KB Write1
MB/s
MB/s
540
480
49,000
540
490
80,000
49,000
540
490
33,000
28,500
540
490
37,000
31,000
540
490
Performance measured using Iometer* with Queue Depth 32. Measurements are performed on 8 GB of Logical Block
Address (LBA) range on a full SSD.
Random 4 KB writes measured using out-of-box SSD.
Incompressible Performance
Specification
Random
4KB Read
(up to)1
IOPS
Random
4KB Write
(up to)1
IOPS
120GB
18,000
15,000
180GB
37,500
240GB
37,500
360GB
480GB
Capacity
1.
Sequential
128KB Read1
Sequential
128KB Write1
MB/s
MB/s
450
120
17,000
455
165
23,000
510
225
37,500
10,000
525
230
37,500
13,000
540
275
Performance measured using Iometer* with Queue Depth 32
Product Specification
8
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Table 6:
Latency
Intel® SSD Pro 2500 Series
Specification
120GB
180GB
Read1
240GB
360GB
480GB
80 µs (TYP)
Write1
85 µs (TYP)
500 ms (TYP)
Power On To Ready2
<10 s
Max Power On To Ready3
1.
2.
3.
Based on sequential 4KB using Iometer with Queue Depth 1 workload with compressible (non-random) data
pattern. Write Cache enabled.
Power On To Ready time assumes safe shutdown
Max Power On To Ready time assumes unsafe shutdown. Based on statistical measurement of 95% quality of
service.
2.3
Electrical Characteristics
Table 7:
Operating Voltage and Power Consumption
Value
Electrical Characteristics
120GB
180GB
240GB
360GB
480GB
Operating Voltage for 5 V (±5%)
Min
4.75 V
Max
5.25 V
Rise Time (Max/Min)
100 ms / 0.1 ms
Fall Time (Max/Min)
5 s / 1 ms
Noise Tolerance
100 mV pp (10 Hz – 30 MHz)
Min Off Time1
1s
Power Consumption (TYP)
Active2
165 mW
Idle3
55 mW
DevSleep4
Thermal Power
5
Regulator Power6
NOTES:
1.
2.
3.
4.
5.
6.
5 mW
3.1 W
3.7 W
4.5 W
4.5 W
4.5 W
3.4 W
4.0 W
4.9 W
5.5 W
5.8 W
Minimum time from when power removed from drive (Vcc < 100 mV) to when power can be reapplied to drive.
Active power measured during execution of MobileMark* 2007 with SATA Link Power Management (LPM) enabled.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
Power consumption during DevSleep state.
Power measured during 128kB sequential writes with Queue Depth 32 workload using 100 ms sample period. This
represents power that would be thermal load on system during heavy workloads.
Power measured during 128kB sequential writes with Queue Depth 32 workload using 500 us sample period. This
represents power that system power supply would have to regulate for proper device operation.
October 2016
330711-002US
Product Specification
9
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
2.4
Environmental Conditions
2.4.1
Temperature, Shock, Vibration
Table 8:
Temperature, Shock, Vibration
Electrical Characteristics
Range
Case Temperature
Operating
0° C – 70° C
Non-operating1
-55° C – 95° C
2
Temperature Gradient
Operating
30 (TYP)° C/hr
Non-operating
30 (TYP)° C/hr
Humidity
Operating
5 – 95 %
Non-operating
5 – 95 %
Shock and Vibration
Range
3
Shock
Operating
1,500 G (Max) at 0.5 msec
Non-operating
1,500 G (Max) at 0.5 msec
4
Vibration
Operating
2.17 GRMS (5-700 Hz) Max
Non-operating
3.13 RMS (5-800 Hz) Max
NOTES:
1.
2.
3.
4.
2.4.2
Please contact your Intel representative for details on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specifications assume SSD is mounted securely with the input vibration applied to the drive-mounting
screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using peak acceleration and
pulse width value.
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the drive-mounting
screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is measured using G Root Mean
Squared (GRMS) value.
Altitude
The drive is not sensitive to changes in atmospheric pressure because it has no moving parts. Drive
tested under non-operational conditions to pressures representative of -1 K and +40 K feet.
Product Specification
10
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
2.5
Product Regulatory Compliance
The Intel SSD Pro 2500 Series meets or exceeds the regulatory or certification requirements in the table below.
Table 9:
Product Regulatory Compliance Specifications
Title
TITLE 47-Telecommunications CHAPTER 1—
FEDERAL COMMUNMICATIONS COMMISSION
PART 15 — RADIO FREQUENCY DEVICES
Description
FCC Part 15B Class B
Region For Which
Conformity Declared
USA
ICES-003, Issue 4 Interference-Causing
Equipment
Standard Digital Apparatus
CAN/CSA – CEI/IEC CISPR 22-10 (Ref. CISPR
22:2008)
Canada
IEC 55024 Information Technology Equipment
— Immunity characteristics— Limits and
methods of measurement CISPR24:2010
EN-55024: 2010 and its amendments
European Union
IEC 55022 Information Technology Equipment
— Radio disturbance Characteristics— Limits
and methods of measurement CISPR22:2008
(Modified)
EN-55022: 2010 and its amendments
European Union
EN-60950-1 2nd Edition
Information Technology Equipment — Safety —
Part 1: General Requirements
USA/Canada
UL/CSA EN-60950-1 2nd Edition
Information Technology Equipment — Safety —
Part 1: General Requirements
USA/Canada
October 2016
330711-002US
Product Specification
11
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
2.6
Reliability
The Intel SSD Pro 2500 Series meets or exceeds SSD endurance and data retention requirements as specified in
the JESD218 specification.
Table 10:
Reliability Specifications
Parameter
Value
Uncorrectable Bit Error Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the specified number of bits
read. In the unlikely event of a non-recoverable read error, the SSD will report it as a
read failure to the host; the sector in error is considered corrupt and is not returned to
the host.
< 1 sector per 1016 bits read
Mean Time Between Failures (MTBF)
Mean Time Between Failures is estimated based on Telcordia* methodology and
demonstrated through Reliability Demonstration Test (RDT).
≥ 1.2 million hours
Minimum Useful Life/Endurance Rating
The SSD will have a minimum of five years of useful life under typical client workloads
with up to 20 GB of host writes per day.
5 years
Insertion Cycles
Maximum insertion/removal cycles on 2.5-inch port
2.7
250 insertion/removal cycles
Hot Plug Support
Hot Plug insertion and removal is supported in the presence of a proper connector and appropriate operation
system, as described in the SATA 3.2 specification.
This product supports asynchronous signal recovery and issues an unsolicited COMINIT when first mated with a
powered connector to enable detection by a host system without hardware device detection.
Product Specification
12
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
3
Mechanical Information
The figure below shows the mechanical information for the full size 2.5-inch Intel SSD Pro 2500 Series. All
dimensions are in millimeters.
Figure 1:
Dimensions for Full Size 2.5-inch Drives
October 2016
330711-002US
Product Specification
13
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
4
Pin and Signal Descriptions
4.1
Pin Locations
Figure 2:
Layout of Signal and Power Segment Pins
4.2
Signal Descriptions
4.2.1
Connector Pin Signal Definitions
Table 11:
Serial ATA Connector Pin Definitions
Pin
Function
S1
Ground
S2
A+
S3
A-
S4
Ground
S5
B-
S6
B+
S7
Ground
Definition
1st mate
Differential signal pair A
1st mate
Differential signal pair B
1st mate
Key and spacing separate signal and power segments.
Product Specification
14
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
4.2.2
Power Pin Signal Definitions
Table 12:
Serial ATA Power Pin Definitions
Pin1
Name
Definition
Mating Order
P12
V33
3.3 V Power; not used
2nd Mate
P22
V33
3.3 V Power; not used
2nd Mate
P3
DevSleep
Device Sleep Pin
1st Mate
P43,4
Ground
1st Mate
P53
Ground
1st Mate
P63
Ground
1st Mate
P73,5
V5
5 V Power
1st Mate
P83,5
V5
5 V Power
2nd Mate
P93,5
V5
5 V Power
2nd Mate
P103
Ground
P116
DAS
P123, 4
1st Mate
Device Activity Signal
2nd Mate
1st Mate
Ground
P132
V12
12 V Power; not used
1st Mate
P142
V12
12 V Power; not used
2nd Mate
P152
V12
12 V Power; not used
2nd Mate
NOTES:
1.
2.
3.
4.
5.
6.
All pins are in a single row, with a 1.27 mm (0.050-inch) pitch.
Pins P1 and P2 are connected together; Pins P13, P14 and P15 are connected together. Although they are not
connected internally to the device, the host may apply voltage on these pins.
The mating sequence is:
- Ground pins P4-P6, P10, P12 and the 5V power pin P7.
- Signal pins and the rest of the 5V power pins P8-P9.
Ground connectors P4 and P12 may contact before the other 1st mate pins in both the power and signal connectors
to discharge ESD in a suitably configured backplane connector.
Power pins P7, P8, and P9 are internally connected to one another within the device.
The host may ground P11 if it is not used for Device Activity Signal (DAS).
4.3
Device Sleep Feature
Device Sleep (or DevSleep/DEVSLP) is the latest feature aligned with Intel® 4th Generation Core™-based
Ultrabook™. Ultrabook™ has stringent power requirements for SSDs and as such requires an ability to put the drive
in a low power state. Although Link Power Management allows some control over power consumption, both
methods still require the SATA link to remain online. The DevSleep pin is an “Enable” (High) pin which is pulled up
by the drive.
October 2016
330711-002US
Product Specification
15
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
5
Supported Command and Feature Sets
The Intel SSD Pro 2500 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial ATA
(SATA) commands defined in the ACS-3 and SATA Revision 3.2 specifications. The mandatory and optional
commands are defined in this section.
5.1
Supported ATA General Feature Command Set
Below are mandatory and optional ATA feature sets supported by Intel SSD Pro 2500 Series.
48-Bit Address
Advanced Power Management (APM)
General
General Purpose Logging (GPL)
Native Command Queuing (NCQ)
Power Management
Sanitize Device
Security
SMART
Software Settings Preservation (SSP)
Trusted Computing
Below are mandatory and optional ATA commands supported by Intel SSD Pro 2500 Series.
Table 13:
Supported ATA Commands and Feature Sets
Commands
BLOCK ERASE EXT
CHECK POWER MODE
Product Specification
16
Feature Set
Sanitize Device 3
Power Management
CRYPTO SCRAMBLE EXT
Sanitize Device 3
DATA SET MANAGEMENT
ATA General Feature
DOWNLOAD MICROCODE
ATA General Feature
EXECUTE DEVICE DIAGNOSTIC
ATA General Feature
FLUSH CACHE
ATA General Feature
FLUSH CACHE EXT
48-Bit Address
IDENTIFY DEVICE 1
ATA General Feature
IDLE
Power Management
IDLE IMMEDIATE
Power Management
NOP
ATA General Feature
READ BUFFER
ATA General Feature
READ DMA
ATA General Feature
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Commands
READ DMA EXT
Feature Set
48-Bit Address
READ FPDMA QUEUED
Native Command Queuing
READ LOG DMA EXT
General Purpose Logging
READ LOG EXT
General Purpose Logging
READ MULTIPLE
ATA General Feature
READ MULTIPLE EXT
48-Bit Address
READ NATIVE MAX ADDRESS
48-Bit Address
READ NATIVE MAX ADDRESS EXT
48-Bit Address
READ SECTOR(S)
READ SECTOR(S) EXT
READ VERIFY SECTOR(S)
ATA General Feature
48-Bit Address
ATA General Feature
READ VERIFY SECTOR(S) EXT
48-Bit Address
SANITIZE FREEZE LOCK EXT
Sanitize Device
SANITIZE STATUS EXT
Sanitize Device 3
SECURITY DISABLE PASSWORD
ATA Security 2
SECURITY ERASE PREPARE
ATA Security 2
SECURITY ERASE UNIT
ATA Security 2
SECURITY FREEZE LOCK
ATA Security 2
SECURITY SET PASSWORD
ATA Security 2
SECURITY UNLOCK
ATA Security 2
SEEK
ATA General Feature
SET FEATURES
ATA General Feature
SET MAX ADDRESS EXT
48-Bit Address
SET MULTIPLE MODE
ATA General Feature
SLEEP
Power Management
SMART DISABLE OPERATIONS
SMART
SMART ENABLE OPERATIONS
SMART
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
SMART
SMART EXECUTE OFF-LINE IMMEDIATE
SMART
SMART READ DATA
SMART
SMART READ ATTRIBUTE THRESHOLDS
SMART
SMART READ LOG
SMART
SMART READ LOG SECTOR
SMART
October 2016
330711-002US
3
Product Specification
17
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Commands
SMART RETURN STATUS
SMART
SMART SAVE ATTRIBUTE VALUES
SMART
SMART WRITE LOG SECTOR
SMART
STANDBY
Power Management
STANDBY IMMEDIATE
Power Management
TRUSTED RECEIVE
Trusted Computing
TRUSTED RECEIVE DMA
Trusted Computing
TRUSTED SEND
Trusted Computing
TRUSTED SEND DMA
Trusted Computing
WRITE BUFFER
ATA General Feature
WRITE DMA
ATA General Feature
WRITE DMA EXT
48-Bit Address
WRITE DMA FUA EXT
48-Bit Address
WRITE FPDMA QUEUED
Native Command Queuing
WRITE LOG DMA EXT
General Purpose Logging
WRITE LOG EXT
General Purpose Logging
WRITE MULTIPLE
48-Bit Address
WRITE MULTIPLE FUA EXT
48-Bit Address
WRITE SECTOR(S) EXT
WRITE UNCORRECTABLE EXT
1.
2.
3.
ATA General Feature
WRITE MULTIPLE EXT
WRITE SECTOR(S)
NOTES:
Feature Set
ATA General Feature
48-Bit Address
ATA General Feature
See the Appendix for details on the sector data returned after issuing an IDENTIFY DEVICE command.
Security features disabled and not supported if Opal activated
Sanitize Device features not supported if Opal activated
Product Specification
18
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
5.2
Advanced Power Management (APM)
The Advanced Power Management can be enabled or disabled using the SET FEATURES command.
Table 14:
APM Subcommand Codes for Power Management and Definitions
Subcommand Codes
Table 15:
Definition
10h
Power optimized for connected standby power
40h
Power optimized for lid up
80h
Balanced power/performance for non-connected standby
FEh
Optimized for high performance (Default)
APM Subcommand Codes for Thermal Power Management and Definitions
Subcommand Codes
Definition
60h
Most aggressive thermal setting
6Fh
Light thermal setting
5.3
Security
5.3.1
Sanitization Methods
Sanitization refers to a process to render data inaccessible. Various sanitization methods are listed below.
5.3.1.1
Secure Erase
Secure Erase runs the SECURITY ERASE UNIT command
Table 16:
Supported Secure Erase Modes and Definitions
Secure Erase Mode
Normal Mode
Enhanced Mode
Definition
Full NAND erase of user available space and spare area
Cryptographically erase data
Secure Erase Modes are not supported if drive is in an Opal Activated state.
5.3.1.2
Table 17:
Sanitize Device
Supported Sanitize Device Modes and Definitions
Mode
Block Erase
Crypto Scramble Ext
Definition
Block erase method, all user data areas including user data not currently
allocated, irretrievable
Changes the internal encryption keys
Sanitize Device Modes are not supported if drive is in an Opal Activated state.
October 2016
330711-002US
Product Specification
19
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
5.3.2
TCG Opal SSC Support
The Intel SSD Pro 2500 Series drive is a Self-Encrypting Drive (SED) that supports the TCG Opal SSC Specification
Version 2.0 rev 1.0 mandatory commands along with the following features:
PSID (Physical presence Security ID) Revert for SSD Repurposing
AES mode: XTS-AES 256-bit
FIPS 197 compliant
Once Opal is activated by user (Locking SP in “Manufactured” state), per Opal specification, ATA Security Features
are not supported by the drive. Word 82, bit 1 and Word 128, bit 0 will indicate
no support (bit = 0). Host should not attempt any ATA Security Features when Opal is activated.
The following table indicates changes in ID Device word values when Opal is activated.
Table 18:
Word
ID Device Changes with Opal Activation
Description
Value (Opal
Deactivated)
Value (Opal
Activated)
82
Features/Command Sets Support
(Bit 1 Security Support)
746Bh
7469h
89
SECURITY ERASE UNIT Time
0002h
0000h
90
ENHANCED SECURITY ERASE UNIT Time
0001h
0000h
92
Master Password Revision Code
FFFEh
0000h
128
Security Status
0021h
0000h
5.3.3
Windows eDrive*
The Intel SSD Pro 2500 Series allows up to 4 independent user locking ranges with hardware-based 256-bit AES
encryption. If additional locking ranges are needed, Windows eDrive* will support additional ranges enabled with
Windows BitLocker* software encryption.
Note: Microsoft* eDrive support is disabled as Out-of-box factory default setting. Use the Intel SSD Pro
Administrator Tool to enable eDrive support. (Visit www.intel.com/ssd to access the Tools panel for download.)
5.4
Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the Intel SSD Pro
2500 Series can be reported to the host on request through the Device Statistics log as defined in the ATA
specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is accessible using
READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
The following table lists the Device Statistics supported by the Intel SSD Pro 2500 Series.
Product Specification
20
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Table 19:
Device Statistics Log
Page
Offset
0x00
0x01 - General
Statistics
0x04 - General
Errors Statistics
0x06 - Transport
Statistics
Equivalent SMART attribute
if applicable
Description
-
List of Supported Pages
-
0x08
Power Cycle Count
0Ch
0x10
Power-On Hours
09h
0x18
Logical Sectors Written
E1h
0x28
Logical Sectors Read
F2h
0x08
Num Reported Uncorrectable
Errors
BBh
0x10
Num Resets Between Command
Acceptance and Completion
-
0x08
Num Hardware Resets
-
0x10
Num ASR Events
-
0x18
Num Interface CRC Errors
-
0x08
Percentage Used Endurance
Indicator
E9h
0x07 - Solid State
Device Statistics
5.5
This statistic counts up from 0 rather than
down from 100, and may go beyond 100 for
drives that exceed their expected lifetime.
Software Settings Preservation
Intel SSD Pro 2500 Series supports the SET FEATURES parameter to enable/disable the preservation of software
settings. The following table lists the software setting that will be preserved across a COMRESET.
Table 20:
Preserved Software Settings
Feature
Preserved Settings
Advanced Power Management
Enabled or Disabled
Multiple Mode
Block size from the last set multiple mode
NCQ Streaming commands
processing
WDNC bit and RDNC bit states
Password Attempt Counter
Password Attempt Counter value
Read look-ahead
Enabled or Disabled
Read/Write Stream Error Logs
Log contents
Reverting to defaults mode
Enabled or disabled
Sanitize Device
Whether device is in the Sanitize Frozen state
Security
Current Security state
Standby Timer
Standby Timer setting
Transfer Mode
DMA and UDMA transfer mode settings
Volatile Write Cache
Enabled or Disabled
Write-Read Verify
Write-Read-Verify feature set settings. Device shall not return to factory
default Write-Read-Verify settings after a COMRESET
October 2016
330711-002US
Product Specification
21
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
5.6
DevSleep
Intel SSD Pro 2500 Series supports the DevSleep feature. DevSleep must be enabled on the device by the
host system through the SET FEATURES command. If DevSleep is enabled by the host, the host must drive
the DevSleep signal to proper assert/de-assert voltage levels according to the SATA specification. Entry into
DevSleep must be preceded by LPM slumber entry by host and device. The Intel SSD Pro 2500 Series also
supports DevSleep_to_ReducedPwrState which allows the host to wake the drive using normal LPM COMWAKE
out-of-band signaling.
For the Intel SSD Pro 2500 Series, the recommended total time to DevSleep for system active state is 6 sec.
The AHCI* controller has 4 parameters used to define proper DevSleep operation between the host and drive.
The following table provides those recommended values for the Intel SSD Pro 2500 Series drive.
Table 21:
DevSleep Control Parameters
Parameter
Definition
DevSleep Idle Time Out – number of
milliseconds prior to host asserting
DevSleep
DITO Multiplier – set once at boot-up
DITO
DM
Minimum DevSleep Assertion Time –
minimum time in milliseconds for
host to assert DevSleep
DevSleep Exit Time Out – max time in
milliseconds from when DevSleep is
negated to when device ready to
detect OOB
MDAT
DETO
Control
Recommended
Settings
Set by Host
Active (lid-up): 375
Set by Host
15
Reported by Drive
10
Reported by Drive
20
Total time to DevSleep entry = DITO * (DM+1)
5.7
SMART Command Transport
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive status and
data from an SSD using standard write/read commands to manipulate two SMART Logs:
Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
Log Address E1h ("SCT Data Transfer") — used to transport data
Product Specification
22
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
5.8
SMART Attributes
The following two tables list the SMART attributes supported by the Intel SSD Pro 2500 Series, and the
corresponding status flags and threshold settings.
Table 22:
SMART Attributes
Status Flags
ID
Attribute
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
1
10
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count).
05h
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
09h
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
Power Cycle Count
0Ch
AAh
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
Available Reserved Space
Program Fail Count
ABh
The raw value of this attribute shows total
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
Erase Fail Count
ACh
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
Unexpected Power Loss
AEh
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
October 2016
330711-002US
Product Specification
23
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Status Flags
ID
Attribute
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0
1
1
0
0
1
1
90
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
1
10
SATA Downshift Count
B7h
The count of the number of times SATA
interface selected lower signaling rate due
to error.
End-to-End Error Detection Count
B8h
Reports number of errors encountered during endto-end error detection within the SSD data path.
Uncorrectable Error Count
BBh
The raw value shows the count of errors that could
not be recovered using Error
Correction Code (ECC).
Temperature
BEh
Reports real-time temperature of drive as
measured by temperature sensor on drive PCB. The
normalized value reports the current temperature
value. The raw value shows current, lifetime highest
and lifetime lowest temperatures. Byte 1:0 = current
temp Celsius; Byte 3:2 = lifetime highest temp
Celsius; Byte 5:4 = lifetime lowest temp Celsius.
Power-Off Retract Count (Unsafe Shutdown Count)
C0h
C7h
The raw value of this attribute reports the
cumulative number of unsafe (unclean) shutdown
events over the life of the device. An unsafe
shutdown occurs whenever the device is powered
off without STANDBY IMMEDIATE being the last
command.
CRC Error Count
The total number of encountered SATA interface
cyclic redundancy check (CRC) errors.
Host Writes
E1h
The raw value of this attribute reports the total
number of sectors written by the host system. The
raw value is increased by 1 for every 65,536 sectors
(32MB) written by the host.
Timed Workload Media Wear
E2h
Measures the wear seen by the SSD (since reset of
the workload timer, attribute E4h), as a percentage
of the maximum rated cycles.
Timed Workload Host Read/Write Ratio
E3h
E4h
Shows the percentage of I/O operations that are
read operations (since reset of the workload timer,
attribute E4h).
Timed Workload Timer
Measures the elapsed time (number of minutes
since starting this workload timer).
Available Reserved Space
E8h
This attribute reports the number of reserve blocks
remaining. The normalized value begins at 100
(64h), which corresponds to 100 percent availability
Product Specification
24
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Status Flags
ID
Attribute
Threshold
SP
EC
ER
PE
OC
PW
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
1
1
0
0
1
0
0 (none)
of the reserved space. The threshold value for this
attribute is 10 percent availability.
Media Wearout Indicator
This attribute reports the number of cycles the
NAND media has undergone. The normalized value
declines linearly from 100 to 1 as the average erase
cycle count increases from 0 to the maximum rated
cycles. Once the normalized value reaches 1, the
number will not decrease, although it is likely that
significant additional wear can be put on the device
Total LBAs Written
E9h
The raw value of this attribute reports the total
number of sectors written by the host system. The
raw value is increased by 1 for every 65,536 sectors
(32MB) written by the host.
Total LBAs Read
F1h
The raw value of this attribute reports the total
number of sectors read by the host system. The raw
value is increased by 1 for every 65,536 sectors
(32MB) read by the host.
Total NAND Writes
F2h
F9h
Raw value reports the number of writes to NAND in
1 GB increments.
Table 23:
SMART Attribute Status Flags
Status Flag
Description
Value = 0
Value = 1
SP
Self-preserving attribute
Not a self-preserving attribute
Self-preserving attribute
EC
Event count attribute
Not an event count attribute
Event count attribute
ER
Error rate attribute
Not an error rate attribute
Error rate attribute
PE
Performance attribute
Not a performance attribute
Performance attribute
OC
Online collection attribute
Collected only during offline
activity
Collected during both offline
and online activity
PW
Pre-fail warranty attribute
Advisory
Pre-fail
5.9
SMART Logs
Intel SSD Pro 2500 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h.
The Intel SSD Pro 2500 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write
scratchpads, where the default value is zero (0). Intel SSD Pro 2500 Series does not write any specific values to
these logs unless directed by the host through the appropriate commands.
The Intel SSD Pro 2500 Series also implements a device vendor specific log at address A9h as a read-only log area
with a default value of zero (0).
October 2016
330711-002US
Product Specification
25
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
6
Certifications and Declarations
The following table describes the Device Certifications supported by the Intel SSD Pro 2500 Series.
Table 24:
Device Certifications and Declarations
Certification
CE* Compliant
UL* Certified
Description
European Economic Area (EEA): Compliance with the essential requirements of EC Council
Directives Low Voltage Directive (LVD) 2006/95/EC, EMC Directive 2004/108/EC and Directive
2011/65/EU.
Certified Underwriters Laboratories, Inc. Bi-National Component Recognition; UL 60950-1, 2nd
Edition, 2007-03-27 (Information Technology Equipment - Safety - Part 1: General
Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology Equipment - Safety Part 1: General Requirements)
C-Tick* Compliant
Compliance with the Australia/New Zealand Standard AS/NZS3548 and Electromagnetic
Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).
BSMI* Compliant
Compliance to the Taiwan EMC standard CNS 13438: Information technology equipment - Radio
disturbance Characteristics - limits and methods of measurement, as amended on June 1, 2006,
is harmonized with CISPR 22: 2005.04.
KCC*
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility Control
Regulation and meets the Electromagnetic Compatibility (EMC) Framework requirements of the
Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.
Microsoft WHCK*
Microsoft Windows Hardware Certification Kit
RoHS* Compliant
Restriction of Hazardous Substance Directive
VCCI*
Voluntary Control Council for Interface to cope with disturbance problems caused by personal
computers or facsimile.
SATA-IO*
Indicates certified logo program from Serial ATA International Organization.
Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final
product. Intel components as well as purchased components on the finished assembly meet JS709 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements. The replacement
of halogenated flame retardants and/or PVC may not be better for the environment.
Product Specification
26
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
7
Appendix
7.1
Identify Device
The table below describes the sector data returned from an identify device command
Table 25:
Identify Device Returned Sector Data
Word
F = Fixed
V = Variable
X = Both
Default Value
0
F
0040h
General configuration bit-significant information
1
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
2
V
C837h
Specific configuration
3
X
0010h
Obsolete - Number of logical heads (16)
4-5
X
0h
6
X
003Fh
7-8
V
0h
Reserved for assignment by the CompactFlash* Association (CFA)
9
X
0h
Retired
10-19
F
varies
20-21
X
0h
Retired
22
X
0h
Obsolete
23-26
F
varies
Firmware revision (8 ASCII characters)
27-46
F
varies
Model number (Intel Solid-State Drive)
47
F
8010h
7:0—Maximum number of sectors transferred per interrupt on
multiple commands
48
F
4001h
Reserved
49
F
2F00h
Capabilities
50
F
4000h
Capabilities
51-52
X
0h
53
F
0007h
Words 88 and 70:64 valid
54
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
55
X
0010h
Obsolete - Number of logical heads (16)
56
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
57-58
X
00FBFC10h
59
V
B110h
October 2016
330711-002US
Description
Retired
Obsolete - Number of logical sectors per logical track (63)
Serial number (20 ASCII characters)
Obsolete
Obsolete
Number of sectors transferred per interrupt on multiple commands
Product Specification
27
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Word
F = Fixed
V = Variable
X = Both
Default Value
60-61
F
varies
62
X
0h
63
F
0007h
Multi-word DMA modes supported/selected
64
F
0003h
PIO modes supported
65
F
0078h
Minimum multiword DMA transfer cycle time per word
66
F
0078h
Manufacturer’s recommended multiword DMA transfer cycle time
67
F
0078h
Minimum PIO transfer cycle time without flow control
68
F
0078h
Minimum PIO transfer cycle time with IORDY flow control
69
F
4010h
Additional Supported
70
F
0h
Reserved
71-74
F
0h
Reserved for IDENTIFY PACKET DEVICE command
75
F
001Fh
Queue depth
76
F
070Eh
Serial ATA capabilities
77
F
0086h
Reserved for future Serial ATA definition
78
F
014Ch
Serial ATA features supported
79
V
0044h
Serial ATA features enabled
80
F
07FCh
Major version number
81
F
FFFFh
Minor version number
82
F
746Bh
Command set supported
83
F
7429h
Command sets supported
84
F
6163h
Command set/feature supported extension
85
V
7469h
Command set/feature enabled
86
V
B409h
Command set/feature enabled
87
V
6163h
Command set/feature default
88
V
407Fh
Ultra DMA Modes
89
F
0002h
Time required for security erase unit completion
90
F
0001h
Time required for enhanced security erase completion
91
V
00FEh
Current advanced power management value
92
V
FFFEh
Master Password Revision Code
93
F
0h
Product Specification
28
Description
Total number of user-addressable sectors
Obsolete
Hardware reset result: the contents of bits (12:0) of this word shall
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Word
F = Fixed
V = Variable
X = Both
Default Value
Description
change only during the execution of a hardware reset
94
V
0h
Vendor’s recommended and actual acoustic management value
95
F
0h
Stream minimum request size
96
V
0h
Streaming transfer time - DMA
97
V
0h
Streaming access latency - DMA and PIO
98-99
F
0h
Streaming performance granularity
100-103
V
varies
104
V
0h
105
F
0001h
Reserved
106
F
4000h
Physical sector size / logical sector size
107
F
0h
108-111
F
varies
112-115
F
0h
Reserved for world wide name extension to 128 bits
116
V
0h
Reserved for technical report
117-118
F
0h
Words per logical sector
119
F
401Ch
Supported settings
120
F
401Ch
Command set/feature enabled/supported
121-126
F
0h
Reserved
127
F
0h
Removable Media Status Notification feature set support
128
V
0021h
Security status
129-159
X
varies
Vendor-specific
160
F
0h
CompactFlash Association (CFA) power mode 1
161-168
X
0h
Reserved for assignment by the CFA
169
X
0001h
170-173
F
0h
Additional Product Identifier
174-175
F
0h
Reserved
176-205
V
0h
Current media serial number
206
X
0025h
207-208
X
0h
209
X
4000h
October 2016
330711-002US
Maximum user LBA for 48-bit address feature set
Streaming transfer time - PIO
Inter-seek delay for ISO-7779 acoustic testing in microseconds
Unique ID
Data set management Trim attribute support
SCT Command Transport
Reserved
Alignment of logical blocks within a physical block
Product Specification
29
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
Word
F = Fixed
V = Variable
X = Both
Default Value
210-211
X
0h
Write-Read-Verify Sector Count Mode 3 (DWord)
212-213
X
0h
Write-Read-Verify Sector Count Mode 2 (DWord)
214
X
0h
NV Cache Capabilities
215-216
X
0h
NV Cache Size in Logical Blocks (DWord)
217
X
0001h
218
X
0h
Reserved
219
X
0h
NV Cache Options
220
X
0h
Write-Read-Verify feature set
221
X
0h
Reserved
222
X
10FFh
Transport major version number
223
X
0h
Transport minor version number
224-229
X
0h
Reserved
230-233
X
0h
Extended Number of User Addressable Sectors (QWord)
234
X
0002h
Minimum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
235
X
0400h
Maximum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
236-254
X
0h
255
X
varies
Description
Nominal media rotation rate
Reserved
Integrity word
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values may change
when media is removed or changed.
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the device or the
commands executed by the device.
X = F or V. The content of the word may be fixed or variable.
Product Specification
30
October 2016
330711-002US
Intel® Solid-State Drive Pro 2500 Series (2.5-inch)
7.2
Models
The following table lists the available 2.5-inch models of the Intel SSD Pro 2500 Series.
Table 26:
Available Models
October 2016
330711-002US
Model String
Capacity
SSDSC2BF120A5
120GB
SSDSC2BF180A5
180GB
SSDSC2BF240A5
240GB
SSDSC2BF360A5
360GB
SSDSC2BF480A5
480GB
Product Specification
31
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Intel Corporation Create Date : 2016:10:12 11:16:13-07:00 Keywords : ssd, solid-state drive, pro 2500, professional family, sipp, tcg, opal, opal 2.0, edrive, sata Modify Date : 2016:10:17 16:14:32-07:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Format : application/pdf Creator : Intel Corporation Title : Intel® Solid State Drive Pro 2500 Series Product Specification, 2.5-inch Description : Intel® SSD Pro 2500 Series Product Specification, 2.5-inch Subject : ssd, solid-state drive, pro 2500, professional family, sipp, tcg, opal, opal 2.0, edrive, sata Creator Tool : Microsoft® Word 2013 Metadata Date : 2016:10:17 16:14:32-07:00 Producer : Microsoft® Word 2013 Document ID : uuid:314edb41-11ea-4545-93ba-fbad9cb1ecbd Instance ID : uuid:10068f28-0772-404a-ac94-0c95bfd51ff9 Page Count : 31EXIF Metadata provided by EXIF.tools