STM32F105xx, STM32F107xx, STM32F2xx And STM32F4xx USB On The Go Host Device Library Stm32 Usblib User Manual
stm32-usblib-user-manual
User Manual:
Open the PDF directly: View PDF
Page Count: 107 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 1 Reference information
- 2 USB host and device library overview
- 3 USB host and device library folder structure
- 4 USB OTG core
- 5 USB OTG low level driver
- 6 USB device library
- 6.1 USB device library overview
- 6.2 USB device library files
- 6.3 USB device library description
- 6.4 USB device library functions
- 6.5 USB device class interface
- 6.6 USB device user interface
- 6.7 USB device classes
- 6.8 Application layer description
- 6.9 Starting the USB device library
- 6.10 USB device examples
- 6.10.1 USB mass storage device example
- 6.10.2 USB human interface device example
- 6.10.3 Dual core USB device example
- 6.10.4 USB device firmware upgrade example
- 6.10.5 USB virtual com port (VCP) device example
- Figure 25. USB virtual com port power-on display message
- Figure 26. USB virtual com port cable connected display message
- Figure 27. Configuration 1a: Two different hosts for USB and USART
- Figure 28. Configuration 1b: One single Host for USB and USART
- Figure 29. Configuration 2: Loopback mode (for test purposes)
- 6.10.6 USB audio device example
- 6.10.7 Known limitations
- 7 USB host library
- 7.1 Overview
- 7.2 USB host library files
- 7.3 USB host library description
- 7.4 USB host library functions
- 7.5 USB host class interface
- 7.6 USB host classes
- 7.7 USB host user interface
- 7.8 Application layer description
- 7.9 Starting the USB host library
- 7.10 USB host examples
- 8 Frequently-asked questions
- 9 Troubleshooting
- 10 Revision history