Super 116e Class Brochure

User Manual: Resource Library

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

Super 116E Class
Self-Elevating Drilling Unit (SEDU)

B

RAISING THE BAR FOR JACKUP RIG PERFORMANCE
Cameron’s LETOURNEAU™ Super 116E Class jackup rig provides the oil and gas industry with
a proven versatile and cost-effective tool for exploratory and development drilling, as well as
workover operations in most moderate metocean regions of the world, in water depths to
375 ft. Drilling payloads (VDL) can exceed 8000 kips including cantilever-combined drilling
loads to 2650 kips.
The outfitted hull, supported on three open truss legs by Cameron’s LETOURNEAU robust rack
and pinion elevating system, is comprised of drilling assembly, engine/gen-sets, mud storage
and processing equipment, storage and machinery rooms, and workshops. Four-level living
quarters with top mounted control rooms accommodate up to 120 POB. Bow-mounted
helideck services S-61N, S92 or optionally Mi-17 helicopter.

1

SUPER 116E CLASS SPECIAL FEATURES
Unlike many others who design for the short term, Cameron is committed to building drilling
systems, products, and services that not only meet today’s deep drilling challenges, but also
stand ready to meet whatever the industry brings next.

• 2
 650-kip combined capacity cantilever assembly
provides support for a 1500-kip hook load plus
7500-kip full setback in tandem with 400-kip
conductor tension. Operational reach is to 70-ft aft of
stern and transverse +/- 15 ft from rig centerline.
• Includes 10 mud pits and three slugging pits, with a
4927-bbl combined capacity. The mud system can be
configured to accommodate simultaneous use of
oil-based and water-based mud.
• U
 tilizes Cameron’s LETOURNEAU 375-Kip Elevating
Unit in an in-line configuration: tested and proven
evolution of our prior units with more than 9000 units
sold.

• Modular leg design maintains the ease of construction
for which Cameron’s LETOURNEAU products are
known. These products are also designed to support
leg additions or reductions in remote locations.

• D
 esigned to survive 40-ft seas, combined with a
one-knot current and 100-knot wind in 350 ft
of water.

• Leg yoke well and leg guide design permits the pulling
of an individual leg into the leg well to inspect the
spud can’s bottom plate surface without dry docking
for the five-year special survey, saving considerable
time and expense.

• C
 ameron’s LETOURNEAU leg guide and pinion system
provides a stiff leg/hull interface during all phases of
operation. The LETOURNEAU system is simple since it
does not require a separate leg fixation system, which
can be overly complex and adds risk to certain
operations. A fail-safe brake set holds a full severe
storm holding load with a tested and proven reserve
margin.
• L eg design utilizes the LETOURNEAU square
cross-section configuration, resulting in high
strength and stiffness-to-weight ratios, as well
as redundant load paths.

2

• Longitudinal and transverse skidding of the drill
package utilizes our electro-mechanical rack and
pinion skidding system. The proven and rugged
skidder system is designed for smooth and simple
operation and is combined with our spring loaded
brake system.
• Provisions for optional independent stand making and
pipe handling from pipe racking to downhole.
• Zero-pollution containment provisions, including all
wastewater, deck, and drillfloor runoff collection and
treatment to less than 15-ppm oil contaminates.

PRINCIPAL CHARACTERISTICS
Hull
Overall Length (including helideck)

305.3 ft

93.05 m

Hull Length (between perpendiculars [LBP])

243.1 ft

74.08 m

Hull Width

206.0 ft

62.79 m

Hull Depth (at side)

26.0 ft

7.92 m

Gross Tonnage (estimated)

7460 tonnes

Net Tonnage (estimated)

2240 tonnes

Load Line Displacement

27,530 kips

12,488 MT

17.0 ft

5.18 m

27,055 sq ft

2513 sq m

Bow to Centerline Forward Leg Spacing

60.0 ft

18.29 m

Longitudinal Leg Spacing

129.0 ft

39.32 m

Transverse Leg Spacing

142.0 ft

43.28 m

Aft Leg Centers to Transom

54.1 ft

16.48 m

14° F to 113° F

-10° C to 45° C

Length, Overall

477.5 ft

145.53 m

Chord, Centerline to Centerline

30.0 ft

9.14 m

46.0/50.9 ft

14.02/15.52 m

23.8 ft

7.25 m

1555/2084 sq ft

144/194 sq m

10.5/7.8 ksf

502/375 kPa

Length

46.0 ft

14.02 m

Width

70.0 ft

21.34 m

Height (above baseline)

63.9 ft

19.49 m

Rotary Travel (port and transverse)

15.0 ft

4.57 m

35 x 32 x 170 ft

11 x 10 x 52 m

Clearance Under Rotary Beams to Main Deck

31.5 ft

9.60 m

Height of Monkey Board Above Drillfloor

87.5 ft

26.67 m

Load Line Draft
Waterplane Area

Design Service Temperature (structure)
Legs

Spud Can – Diameter (flat-to-flat) (standard/optional)
• Height
• Nominal Projected Area (standard/optional)
• Storm Bearing Pressure
Drillfloor and Substructure

Derrick Size

3

PRINCIPAL CHARACTERISTICS (CONT.)
Cantilever and Subbase
Maximum Well Center, Aft of Transom

70.0 ft

21.34 m

Cantilever Beam – Length

126.0 ft

38.40 m

• Depth

18.0 ft

5.49 m

• Spacing

52.0 ft

15.85 m

60.0 ft

18.29 m

• Width

52.0 ft

15.85 m

• Height (above main deck)

22.5 ft

6.86 m

800 kips

363 MT

Clearance Under Pipe Rack Beams to Main Deck

19.5 ft

5.94 m

Sub-base – Length

35.0 ft

10.67 m

• Width

67.0 ft

20.42 m

• Depth

12.0 ft

3.66 m

73.0 ft

22.25 m

Pipe Rack Deck – Length

Elevated Pipe Rack Capacity

Heliport
Bow-Mounted Octagon (flat to flat)
Height Clearance (to plating)

15-degree static trim

Helicopter Type (optional)

S-61N/S92 or Mi-17

Helicopter Refueling System (optional)
Helicopter Fire Fighting

Foam System

Regulations (structural)

CAP 437

Accomodation Capacity

120 POB*

Double Stateroom with Private Bath

52 Cabins

Four-Man Stateroom with Private Bath

4 Cabins

Medical Treatment Room

1 Bed

Offices

6

Conference Room

1

Recreation Room

2

* Alternative configurations from 106 to 120 POB are available.

4

1000 gal

3785 L

ELEVATING SYSTEM
Make/Model

LETOURNEAU 375-Kip elevating unit

Number

12 each, 5 high, in-line configuration (60 pinions total)

Jacking Speed (nominal)

1.5 ft/min (0.46 m/sec)

Drive

LETOURNEAU proprietary electro-mechanical rack and pinion

Brake

LETOURNEAU spring-loaded, dry plate multidisk, electric release

Control and Monitoring

LETOURNEAU proprietary PLC based touch screen

VOLUME CAPACITIES (TYPICAL)
Base Oil Storage

1253 bbl

199 cu m

Brine Storage

683 bbl

109 cu m

14,060 bbl

2235 cu m

Drill Water (inner bottom tanks only)

4769 bbl

758 cu m

Potable Water

1656 bbl

263 cu m

Fuel Oil Storage

1994 bbl

317 cu m

Fuel Oil Day Tank

4555 gal

17,243 L

Lube Oil

1229 gal

4652 L

Dirty Oil

66 bbl

10 cu m

Bulk Cement and Mud “P” Tanks (8)

12,845 cf

364 cu m

Liquid Mud Tanks, Active and Reserve (8)

4589 bbl

730 cu m

Slugging Pits (2)

338 bbl

54 cu m

Sandtrap and Process Tanks

373 bbl

59 cu m

Skimmer Tank

445 bbl

71 cu m

Trip Tank

80 bbl

13 cu m

49,777 bbl

7914 cu m

Drill Water (including combined tanks)

Preload Capacity

5

DECK LOADINGS
Main Deck

500 lb/sq ft

2.44 MT/sq m

Machinery Deck

500 lb/sq ft

2.44 MT/sq m

• Inside of Derrick Base

500 lb/sq ft

2.44 MT/sq m

• Outside of Derrick Base

270 lb/sq ft

1.32 MT/sq m

Cantilever Pipe Rack Decking

270 lb/sq ft

1.32 MT/sq m

Quarters and Walkways

94 lb/sq ft

0.46 MT/sq m

Mud Pits

21 lb/gal

2.50 kg/L

Main Deck Pipe Rack Beams

5000 lb/ft

7.40 MT/m

Drillfloor

BASIC MACHINERY AND EQUIPMENT
Pedestal Deck Cranes – (3)
(2) – LETOURNEAU PCM – 120SS Crane – ABS CRC to API 2C Design
Boom Length

120.0 ft

36.6 m

Min. Reach

25.0 ft

7.6 m

Max. Reach

123.0 ft

37.5 m

Static Capacity

84.1 kips at

25.0 ft

38.20 MT at

7.6 m

38.7 kips at

50.0 ft

17.60 MT at

15.2 m

15.7 kips at

100.0 ft

7.10 MT at

30.5 m

7.0 kips at

123.0 ft

3.20 MT at

37.5 m

(1) – LETOURNEAU PCM-220SS Crane – ABS CRC to API 2C Design
Boom Length

140.0 ft

42.7 m

Min. Reach

32.0 ft

9.8 m

Max. Reach

145.0 ft

44.2 m

Static Capacity

6

150.0 kips at

37.0 ft

68.00 MT at

11.3 m

117.5 kips at

50.0 ft

53.30 MT at

15.2 m

51.7 kips at

100.0 ft

23.50 MT at

30.5 m

22.3 kips at

145.0 ft

10.10 MT at

44.2 m

DRILLING EQUIPMENT (TYPICAL)
Description

Qty.

Capacity

Source

Model

Derrick

1

35 x 32 x 170 ft, 5.5 ft offset

Cameron

1.5 M API Rated

Drawworks

1

4500 hp

Cameron

LDW1500K

Mud Pumps

3

2200 hp to 7500 psi

Cameron

W-2215

Rotary Table

1

49.5 in

Cameron

L-495

Top Drive

1

750 short tons

Cameron

DDTD-750V2

Traveling Block

1

750 short tons

Cameron

TB-750 ton

Deadline Anchor

1

1000 short tons, 1.5 in to 2 in line

Cameron

Cameron

Drill Line Spooler

1

1.5 in to 2 in x 10,000 ft

Cameron

Cameron

Twin Mouse Hole

1

14 in x 50 ft, traveling type

Cameron

Cameron

Iron Roughneck

1

3.5 in to 9.75 in, 200,000 N•m

Cameron

Cameron

Hydraulic Mud Bucket

1

Articulating Arm

Cameron

Cameron

Hydraulic Cathead

1

250 kN, Stroke 2000 mm

Cameron

Cameron

Driller’s Cabin

1

X-Com Chair

Cameron

Cameron

Choke and Kill

1

10,000 psi manifold

Cameron

Cameron

Standpipe Manifold

1

7500 psi, 180-degree gooseneck

Cameron

Cameron

BOP Stack

1

13-5/8 in x 10,000 psi

Cameron

Cameron

BOP Handling

1

75 MT, 100% redundant

Cameron

Cameron

Pipe Tensioner

1

400 short tons

Cameron

Cameron

Conductor Tensioning

1

4 x 100 short tons

Cameron

Cameron

• Shale Shakers

4

750 gal/min

Cameron

M-I SWACO*

• Desander

1

1200 gal/min

Cameron

M-I SWACO*

• Desilter

1

1200 gal/min

Cameron

M-I SWACO*

• Degasser

1

1200 gal/min

Cameron

M-I SWACO*

Mud Processing:

*Alternatives are available upon request.

7

RIG POWER (TYPICAL)
600 Volt AC

Qty.

Model

Capacity

Main Engines

5

CAT 3516C-HD*

2150 hp

Generators

5

Kato 6P6.6-3200HR*

2178 kVA

Emergency Engine

1

CAT 3512*

1478 hp

Emergency Generator

1

Kato C060-6422*

1950 kVA

AC Drives – VFD

11

LeT - OEM V3000*

1300 amp each

*Alternatives are available upon request.

SAFETY EQUIPMENT (TYPICAL)
Description

8

Qty.

Type

Life Boats

4

60-person SOLAS approved with davits

Life Rafts

6

25-person SOLAS approved, throw over with hydroelectric release

Fast Rescue Boat

1

six-person SOLAS and LSA approved

CAMERON’S INSTALLATION AND COMMISSIONING TEAM
Cameron’s installation and commissioning
team provides world-class service for your
projects globally. With more than 130
combined years of rig construction,
management, and commissioning
experience, our team works with you to
ensure that the rig is ready to drill on time
and on budget.
We are there with you, from equipment
delivery, to the shipyard, through the rig’s
arrival at the first well. Cameron handles all
aspects of installation and commissioning,
including receiving and inspecting
shipments, working with third parties, and
managing Cameron’s experienced
technicians on site. A dedicated onsite
commissioning manager will work with
your project manager to lead the project.
At Cameron, we understand the unique challenges and demands of building a rig and integrating
a drilling package. We are with you every step of the way.

Specifications and data presented in this brochure are for information use only and are subject to change without notice.
Hull specific specifications may differ.

9

4601 Westway Park Blvd.
Houston, TX 77041
USA
Tel 1 713 939 2211
6401 W. Sam Houston Pkwy. N.
Houston, TX 77041
USA
Tel 1 713 983 4700
3110 H.G. Mosley Pkwy.
Longview, TX 75605
USA
Tel 1 903 553 3500
Andøyfaret 3
N-4623 Kristiansand S.
Norway
Tel 47 380 00 570

Learn more about Cameron’s Super 116E Class Platform at:
www.c-a-m.com or email drilling@c-a-m.com

ENVIRONME
N
XCELLEN
LE
CE
TA

TH SAFETY
AL
A
HE

ND

CA

HSE Policy Statement
At Cameron, we are committed ethically, financially and personally to a
working environment where no one gets hurt and nothing gets harmed.

MERON

©2014 Cameron | LETOURNEAU is a trademark of Cameron. | 02/14 AD01193DRL



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2014:02:26 09:05:36-06:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2014:02:26 09:25:43-06:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:02:26 09:25:43-06:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:172da0ab-f2d4-d344-920b-6b10729250b2
Original Document ID            : xmp.did:DBCFBB1F3F04DF11B353984436B34E13
Document ID                     : xmp.id:AE9703290D2068118C148BF60A6C223F
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:AD9703290D2068118C148BF60A6C223F
Derived From Document ID        : xmp.did:B27660250D2068118083BC7B99B67F1F
Derived From Original Document ID: xmp.did:DBCFBB1F3F04DF11B353984436B34E13
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2014:02:26 09:05:36-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 12

EXIF Metadata provided by EXIF.tools