Cisco TelePresence SX20 Quick Set Installation Sheet SX PC12 For Web

User Manual: SX-PC12

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Installation Guide for Cisco TelePresence SX20 Quick Set
SX20 Quick Set components

Recommended room setup
The following should be regarded as
guidelines only. Try things out on-site
before fixing any mounting positions.
Explore the Cisco Project Workplace
to find inspiration and guidelines when
preparing your office or meeting room
for video conferencing, http://www.
cisco.com/go/projectworkplace

yy SX20 Codec
yy Camera options
A: PrecisionHD 1080p 12X
B: Precision 40
yy Table Microphone 20
(1 default and 1 optional)
yy TRC6 remote control and
two AAA batteries
yy Touch 10 controller (optional)
yy Codec wall mounting kit
(optional)
yy Camera mounting bracket
(optional)

yy HDMI cable for monitor
(1 default)
yy Ethernet cable for LAN
yy VGA to DVI-A cable
for PC connectivity (optional)

Camera options
Camera

Microphones

Place the camera at eye height to
get the best perceived eye contact.
Typically, this is about 1.2 m (4 ft)
above the floor.

Place the microphone(s) as close to
all meeting participants as possible.

Use the camera self view function
to make sure all participants are
captured by the camera.
Aim for good illumination of a
person’s face to avoid shadows. Also
avoid direct light on the monitor to
prevent reflections.

Option A: PrecisionHD 1080p 12X
Typical room scenario:
Medium to large
meeting room.

Snap on the lens hood to
prevent stray light from
disturbing your video
experience.
You can use the optional
camera bracket to place
the camera on top of the
monitor. Fasten the bracket
to the monitor with Velcro.
The camera snaps to the
magnets on the bracket.

Option B: Precision 40

yy Camera cable

You can use the optional
camera bracket to place
the camera on top of the
monitor. Fasten the bracket
to the monitor with Velcro.

yy Power supply and
power cable

The camera is fastened to
the bracket with a screw.

yy HDMI to DVI-D cable
for PC connectivity (optional)

yy Microphone extension cable
(optional)

In addition to the SX20 Quick Set you must provide a monitor or
projector, and a loudspeaker (external or built-in to the monitor) to
complete your video conferencing system.

Documentation
Cisco Spark: Visit the Cisco Spark help site to find more information
about Spark registered room systems, http://help.ciscospark.com
Other services: Visit the Cisco web site to find user guides
and compliance and safety information for the product,
http://www.cisco.com/go/sx-docs

78-100554-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.

70˚

Typical room scenario:
Medium sized
meeting room.
70˚

Tool: 4 mm Allen Key (not
provided).
A 级声明 (A Class product declaration)

本产品为 A 级 ITE，在其使用说明，铭牌等显著位置中已包含如下内容的声明
(We declare here that the subject product is A class ITE product, and the
following statement is clearly marked in the user manual or nameplate):

EMC Class A declaration
警告
此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对干扰采取切实可行的措施。
WARNING:
WARNING: This is a class A product. In a domestic environment this
This may
is a cause
class radio
A product.
In a domestic
environment
this may be
product
interference
in which
case the user
product
causeadequate
radio interference
requiredmay
to take
measures.in which case the user may be
required to take adequate measures.

声明所在位置 (Position of the Declaration):



使用说明 User Manual

Installation Guide for Cisco TelePresence SX20 Quick Set
Connecting the cables
Connect all cables as illustrated.
Caution: Make sure all units are switched off when connecting or
disconnecting devices.
1

2

1

3

4

If connecting an external loudspeaker, please take care to use an
active speaker (built-in amplifier). Use an ungrounded (floating)
speaker to avoid ground loop noise.

2

Connect one or two microphones to your codec.
We recommend Cisco Table Microphone 20 or
Cisco TelePresence Ceiling Microphone.

3

Connect the codec to LAN/Ethernet.

4

Connect your primary display to the blue colored HDMI socket.

5

HDMI

Camera option B:
Precision 40

With the dual display option, connect the second display to the
other HDMI output.
5

Connect your camera (option A or B) to the codec.

6

Connect a PC (video and audio) to be able to share presentations
(locally, or with remote participants).

7

Always use the provided power supply:
yy FSP FSP060-DIBAN2

Starting to use the system
If the codec is not starting automatically, press the power
button to switch it on. When the button lights steadily the
system is ready for configuration. This may take a few minutes.
Follow the instructions on screen:
yy Cisco Spark: To find more information on how to get started with
Spark registered systems, visit http://help.ciscospark.com and look
for Getting Started articles for room systems.
yy Other services: For further information on set-up and configuration,
download the Getting Started Guide from the Cisco web site,
http://www.cisco.com/go/sx-docs

78-100554-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.

Camera option A:
PrecisionHD 1080p 12X

MiniHDMI
jack (or VGA)

Ventilation
7

6

Do not block any ventilation openings;
minimum 8 cm / 3.15 in. free space.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Has XFA                         : No
Language                        : en-US
Page Count                      : 2
Access Level                    : Customer,Guest,Partner
Secondary Concept               : Cisco TelePresence SX20 Quick Set
Content Type                    : cisco.com#US#postSales
Ia Path                         : cisco.com#Products#Cisco Products#Collaboration Endpoints#TelePresence Integration Solutions#Cisco TelePresence SX Series#Cisco TelePresence SX20 Quick Set
Auto Play                       : 
Modify Date                     : 2017:01:03 23:13:30-08:00
Entitlement Expression          : contains( "0,1,2,3,4,7" , $profileField[3] )
Title                           : Cisco TelePresence SX20 Quick Set Installation Sheet
Doc Type                        : TSD Products Installation Guide
Secondary Doctype               : 
Document Id                     : 1483514010637317
Down Loadable                   : 
View Able                       : 
Producer                        : Adobe PDF Library 15.0; modified using iText 2.1.7 by 1T3XT
Description                     : This document describes how to install the Cisco TelePresence SX20 Quick Set.
Fire Wall                       : 
Trapped                         : False
Alfresco Doc Version            : 
Creator                         : Adobe InDesign CC 2015 (Windows)
Country                         : US
Alfresco Trace ID               : 
Concept                         : Cisco TelePresence SX20 Quick Set
Date                            : 2015-06-26T14:20:15.296-07:00
Create Date                     : 2016:05:25 15:12:18+02:00

EXIF Metadata provided by EXIF.tools