Technics SX PR950 User Manual

Technics SX-PR950 User Manual technics_sx-pr950_user_manual Technics - SX-PR950 - User Manual

User Manual: Technics SX-PR950 User Manual Technics - SX-PR950 - User Manual

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

SX-PR950.fm 1 ページ

２００３年７月１５日

火曜日

午後２時５２分

DIGITAL ENSEMBLE

SX-PR950
Thank you for purchasing the PR950. The PR950 is operated for the most part in the same way as the PR54, therefore read
the included instructions. This booklet explains assembly, operation and specifications that differ from the PR54, therefore
read it thoroughly.

How to open the top cover

Care and maintenance

You can open the cover and lift the support into an upright
position.
Top cover
Hole
Support

Never use petroleum-based solvents such as thinner or
benzene, and do not use chemically treated dust cloths,
as these products will damage the finish of your piano.
䡲 Caution for use
● Do not place vinyl products, books with vinyl-treated
covers, plastic erasers, etc., directly on the piano.
● Do not place vases or other containers of liquids on the
piano.
● Please read the safety instructions on page 6 on Operating Instructions.

Warning!
● The piano top cover is quite heavy, and when opening it,
be sure to insert the support into the hole to secure the
top cover in the open position. Be careful when closing the
top cover not to catch fingers or clothing under the top
cover or in the hinges.
● Children should be advised not to open or close the top
cover, and should not be permitted to operate the piano
without adult supervision.
The following mark and symbols are located on bottom
of the unit.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:

䡲 Care of the finished surfaces
● To dust the piano, use a feather duster or wipe gently
with a soft cloth.
● To avoid scratching the surface, refrain from applying
too much pressure when dusting the piano.

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this
device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.

Marking sign is located on bottom of the unit.

SX-PR950.fm 2 ページ

２００３年７月１５日

火曜日

午後２時５２分

Assembly
Follow the steps below to assemble your Technics piano. Make sure you are using the correct parts and that they are in the
correct direction.
● At least 2 people are required for assembly.
● To disassemble the piano, reverse the procedure.

A:
B:
C:
D:
G:

Black screws (long)............. 12
Black screws (short).............. 4
Washers .............................. 12
#4 Hexagonal key ................. 1
Brass-colored screws............ 4

● Following the assembly, connect the respective cords.

(Piano bottom side)
PEDAL IN

mark

AC IN

Plug
Pedal
cord

•

Power
cord

Use the included clamps to secure the cords.

● Place the insulators (included) under the casters, positioning
the Technics Piano in the desired location.
● Use the adjusters to make the pedal unit secure.

Caution
If the Technics Piano is to be moved, be sure to first shorten the
adjusters in order to prevent pedal unit damage and scratching
the floor.

䡲 Confirm
After assembling, check these points.
● Are any parts left over?

→ Check the assembly procedure again.

● Does the piano rattle when it is rocked?

→ Make sure all the screws are securely tightened.

● Is the power cord firmly inserted?
→ Check again.

Insulator
Adjuster

● Is the plug of the pedal cord inserted as far into the connector
terminal as it will go?
→ If it is not completely inserted, the sustain and other pedal functions may not work.

● Does the pedal box move when the pedals are pressed?
→ Turn the adjuster to stabilize the pedal box.

● When the piano has been moved or transported, retighten the
screws securely.

2

SX-PR950.fm 3 ページ

２００３年７月１５日

火曜日

午後２時５２分

Operations
䡲 The Sostenuto (CENTER) pedal is added.
● About the Sostenuto pedal, refer to page 121 on the Operating Instructions.
● Step 2 of the PEDAL SETTING is different from the PR54.
(page 121 on the Operating Instructions.)

2. Use the ▲ and ▼ buttons to select pedal, and the ∧ and ∨ buttons to select its function.
䡲 There is no USB terminal. (page 134 on the Operating Instructions.)
● CD-ROM is not included.
● Also, there is no DIGITAL NETWORKING USB demo performance (page 15 on the Operating Instructions.) and COMPUTER
CONNECTION (MIDI) function. (page 134 on the Operating Instructions.)

Specifications
SX-PR950
88 KEYS

SOUND GENERATOR

PCM

MAX. POLYPHONY

64 NOTES

SOUNDS

KEYBOARD

NUMBER OF SOUNDS

1025 SOUNDS (990 SOUNDS + 2 ORGAN DRAWBARS + 33 DRUM KITS)

PIANO GROUP

GRAND, UPRIGHT, ELECTRIC, MODERN

SOUND GROUP

STRINGS, VOCAL, GUITAR & HARPSI, BRASS, SAX & WOODWIND,
ORGAN & ACCORDION, SYNTH, BASS, MALLET & ORCH PERC,
WORLD, PIANO MIXTURES, ORCH MIXTURES, DIGITAL DRAWBARS,
DRUM KITS, SOUND EXPLORER

SIMPLE PIANO

嘷

FAVORITES

嘷

PEDAL

DAMPER, SOFT*, SOSTENUTO* (*PROGRAMMABLE)

PROGRESSIVE PIANIST

嘷

TOUCH SENSITIVITY

嘷
DIGITAL EFFECT, MULTI EFFECT, REVERB, CHORUS, BRILLIANCE

CONDUCTOR

RIGHT 1, RIGHT 2, LEFT

TRANSPOSE

±12 NOTES

RHYTHMS

EFFECT

NUMBER OF RHYTHMS

128 RHYTHMS × 4 VARIATIONS

RHYTHM GROUP

POP, ROCK, FUNK & SOUL, DISCO, POP BALLAD, BALLAD,
BALLROOM & SHOW, 8BEAT, 16BEAT, USA, WALTZ & TRAD,
JAZZ & SWING, LATIN & WORLD

METRONOME

嘷

CONTROLS

MAIN VOLUME, APC/SEQUENCER VOLUME, BALANCE, MUTE,
START/STOP, INTRO & ENDING 1, INTRO & ENDING 2, FILL IN 1, FILL IN 2,
COUNT INTRO, SYNCHRO & BREAK, TEMPO/PROGRAM, TAP TEMPO,
FADE IN/OUT, SPLIT POINT

AUTO PLAY CHORD

MODE: BASIC, ADVANCED 1, ADVANCED 2, PIANIST
MEMORY, ON BASS, CHORD FINDER, LEFT HOLD

3

SX-PR950.fm 4 ページ

２００３年７月１５日

火曜日

午後２時５２分

SX-PR950
MUSIC STYLE ARRANGER

嘷

SOUND ARRANGER

嘷

PIANO STYLIST

嘷

ONE TOUCH PLAY

嘷
嘷

TECHNI-CHORD
PANEL MEMORY

3 BANKS × 8

SEQUENCER

16 TRACKS
RESOLUTION: 1/96 PER BEAT
STORAGE CAPACITY: APPROX. 40000 NOTES (10 SONGS MAX.)
INPUT MODES: EASY RECORD, REALTIME RECORD, STEP RECORD
FUNCTIONS: RECORD & EDIT, COPY & PASTE, RANGE EDIT

COMPOSER

8 PARTS: BASS, ACCOMP 1 – 5, DRUMS 1, 2
STORAGE CAPACITY: APPROX. 13000 NOTES
INPUT MODES: REALTIME RECORD, STEP RECORD
FUNCTIONS: EASY COMPOSER, PATTERN COPY,
SEQ TO COMPOSER COPY, LOAD SINGLE COMPOSER
MEMORY: 3 BANKS

DISK

3.5 inch DISK DRIVE for 2HD (1.44MB), 2DD (720KB)
LOAD, SAVE, DIRECT PLAY, SONG MEDLEY, DISK TOOLS,
PREFERENCES

SOUND

PART SETTING, MIXER, MASTAR TUNING, KEY SCALING,
APC REVERB SETTING, TECHNI-CHORD, SOUND LOAD OPTION,
SOUND ARRANGER

REVERB & EFFECT

MIC REVERB & EFFECT, TONE CONTROL, REVERB, CHORUS, MULTI,
SOUND LOAD OPTION, MIXER

CUSTOMIZE

DISPLAY TIMEOUT, DATA PROTECTION, FAVORITES SETTING,
MIDI SETTING LOAD OPTION, LANGUAGE SETTING, DISK PREFERENCES

CONTROL

INITIAL, PEDAL SETTING, PANEL MEMORY MODE,
MUSIC STYLE ARRANGER MODE, FADE IN/OUT SETTING

SOUND EDIT

EASY EDIT, TONE, PITCH, FILTER, AMPLITUDE, LFO, EFFECT, CONTROLLER
MEMORY: 40, 1 USER DRUM KIT

MIDI

PART SETTING, CONTROL MESSAGES, REALTIME MESSAGES,
COMMON SETTING, INPUT/OUTPUT SETTING, MIDI PRESETS, MODE SETTING

DISPLAY

LCD: PAGE, CONTRAST, EXIT, DISPLAY HOLD, OTHER PARTS/TR

HELP

嘷

DEMO

嘷

TERMINALS

PHONES × 2, LINE OUT (R/MONO,L), AUX IN (R/MONO,L)
MIDI (IN, OUT), PEDAL IN, MIC (VOLUME)

OUTPUT

80 W (40 W × 2)

SPEAKERS

14 cm × 2, 6.5 cm × 2

POWER REQUIREMENT

110 W
AC120V 60 Hz (NORTH AMERICA AND MEXICO)

DIMENSIONS (W × H × D)

141cm × 150 cm × 97 cm (55-1/2" × 59-1/16" × 38-3/16")

NET WEIGHT

98 kg (216.1 lbs)

ACCESSORIES

AC CORD, INSULATOR × 3, CLOTH, POLISH

● Design and specifications are subject to change without notice.

QQCG0448A
Se0703S0

4



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:07:15 14:53:08
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2003:11:28 11:55:50+09:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools