Top Mounted Manipulator Arm Flyer

User Manual: Resource Library

Open the PDF directly: View PDF PDF.
Page Count: 2

Manipulator Arm (Top Mounted)
MA-T
Cameron’s heavy-duty manipulator arm is designed to
accommodate client demands for an efficient, safe and
rigid tubular handling system for all drilling operations.
The engineering of the manipulator arm enhances low
maintenance and long equipment life using industry-
proven components and high-fatigue capacity materials.
The manipulator arm comprises a hydraulic, remote-
operated control system to provide smooth, natural and
comfortable operation.
The manipulator arm has a SWL of 600 kg at maximum
stroke and is designed for permanent installation in the
derrick at offshore drilling locations.
Main Features
• High-capacity slew bearing on top mounted slew-base
for permanent installation on derrick
• Heavy-duty tilt cylinders designed to secure redundancy
in case of cylinder failure
• Hydraulic internal slew gears of well proven design for
slew purposes
• Inside twin telescopic cylinder with back side
connections; secures high speed extension/retraction and
reduces the use of hydraulic hoses
• Interchangeable guide head with standardized interface
• Remote hydraulic control stand with hydraulic valve
assembly for permanent installation
Safety Features
• Mechanical heavy-duty end stoppers for slew, telescope
and guide head tilt
• Proportional counterbalance valves for lifting (tilt),
telescoping and guide head open/close/tilt
• Sensors for slew, tilt and telescope for integration with
the rigs anti-collision (optional)
• Emergency lowering system if hydraulic power loss
• Dual retention of all fasteners
• Guide fingers are chamfered to reduce risk of
overstressing the guide head or the manipulator arm
structure
© 2013 Cameron | 08/13 AD00300DRL
4601 Westway Park Blvd.
Houston, TX 77041
USA
Tel 1 713 939 2211
Andøyfaret 3
N-4623 Kristiansand S.
Norway
Tel 47 380 00 570
drilling@c-a-m.com | www.c-a-m.com
Technical Specifications SI Imperial (US)
Lifting capacity at maximum stroke 6000 N 1322 lb
Slew/holding torque 83 kN∙m/105 kN∙m 61,217 ft-lb/77,444 ft-lb
Slew speed 1.2 rpm
Maximum stroke 5200 mm 17 ft
Maximum reach 8300 mm 27 ft
Telescope push/pull force 48,000 N 10,790 lb
Design code DNV-OS-E101 drilling plant
Area classification Zone 1, IIB, T3 area
Scope of Supply Options
Manipulator arm assembly, complete with one guide head Riser guide head, range up to 47”
Remote hydraulic control stand Casing guide head, range 10” to 20”
Documentation Control system with sensor package for integration with the ZMS or
anti-collision systems
Cable remote operator panel
Radio remote operator panel
Greater capacities in reach, lifting, slewing and stroke to meet client
requirements
Centralized greasing system for slew bearing, pinion and tilt cylinders

Navigation menu