Ucbthesis Instructions
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
The UCB Thesis Class
Paul Vojta
Mathematics Department
vojta@math.berkeley.edu
Version 3.391
October 13, 2011
Abstract
This is a class file for theses and dissertations at the University of California, Berkeley. It is based on the memoir class,
and therefore supports all of the functionality of that class.
It should generate a document that meets all of the basic formatting requirements given in the Dissertation Filing
Guide or the Thesis Filing Guide (as appropriate) produced
by the UC Berkeley Graduate Division and available on the
web at http://grad.berkeley.edu/policies/. This version of the class is based on the April 2012 and February
2012 versions of the dissertation and thesis documents, respectively.
1 Introduction
The ucbthesis class is a modified version of the standard LATEX memoir
class that is accepted for use with University of California, Berkeley,
Ph.D. dissertations and Master’s theses. The available commands are
almost identical to those of the memoir class, so the recommended
starting point for documentation is general documentation for LATEX.
Note: The documentation for the memoir class is long (currently
583 pages), and the vast majority of it is completely irrelevant to the
process of writing a thesis using ucbthesis. Do not print out the
documentation for the memoir class! Doing so would be a huge
waste of paper and money. Look to general LATEX documentation
instead.
The key features of the class are:
1. The primary modification to the memoir class is the setting of the
margins and (for Master’s theses prior to 2011) use of pseudodouble-spacing, since Berkeley’s rules for Master’s theses were
still designed for typewriters. The latter is achieved by increasing
the \baselinestretch parameter to 1.37. The \baselinestretch
is returned to a single-spaced value of 1.00 for elements like tables, captions, and footnotes and for all displayed text (quote,
quotation, and verse environments).
2. Margins are 1 inch on all sides.
3. Uses 12 point by default; you can use the 10pt or 11pt options
for those sizes (but note that only 12pt should be used for the
final submitted copy).
4. Page numbers are in the top right corner for all pages.
5. Complete, correct front matter for Berkeley dissertations can be
generated. If you are not a Berkeley student, you should make
sure that the front matter is OK with your school.
The ucbthesis class is derived from the ucthesis class—the name
has been changed to reflect the fact that it is (probably) only valid for
Berkeley theses. The ucbthesis class should be used for new theses
(at Berkeley); ucthesis may still be used for older theses submitted
prior to the change to electronic submission in Fall 2009, and will still
be maintained for this purpose.
A (partial) list of thesis classes at other University of California
campuses is available on the web at http://math.berkeley.edu/
~vojta/ucthesis.html.
2 Using the ucbthesis Class
2.1 Sample File
There is a sample dissertation (by the fictitious, but very irritating,
Perry H Disdainful) in the file ucbtest.tex. It also uses ucbtest.bib
as its bibliography database (though the contents of the database are
not important). Mostly this is useful as an example of how to produce
the front matter. If you don’t understand LATEX at all, this file might
help you get started, but, since you’re going to be writing a 100+ page
document, you should look into more comprehensive information on
LATEX. A list of TEX and LATEX documentation is maintained at the
web page http://www.tug.org/interest.html#doc.
2
2.2 Selecting the ucbthesis Class
To use the ucbthesis class, make sure that the ucbthesis.cls file is
on your TEXINPUTS search path and use the following command at
the start of your input file:
\ documentclass { ucbthesis }
2.3 Class Options
The options for the ucbthesis class are given in Table 1. They should
be selected on the \documentclass line, e.g.:
\ documentclass [10 pt , draft ]{ ucbthesis }
All options supported by the memoir class are also supported (although some of them would not be very useful for a thesis).
2.4 Page Headers
If you want to use page headers or footers other than the default ones,
you should try using headerfooter.sty or fancyheadings.sty. The
myheadings pagestyle doesn’t work well and there is no workaround.
The headerfooter and fancyheadings styles are widely distributed,
well documented, and easy to use.
2.5 Overall Document Structure
The overall structure of a .tex file for a thesis is the same as most
other LATEX files: a \documentclass line, followed by declarations
(e.g., \usepackage lines and macro definitions), and then one (or,
rarely, more) instances of a document environment.
Your best guide for what goes inside the document environment is
to follow the practice in the sample file ucbtest.tex. In a nutshell,
though, this consists of declarations and environments for the front
matter, followed by the main content of the thesis, and then the bibliography and any appendices. The structure of the part of the file
corresponding to the front matter is described in the next section.
3 Front Matter
In addition to setting the page layout and line spacing, the other
key service provided by the ucbthesis class is that it generates correct front matter (title page, approval page, abstract, etc.) with a
3
Option
phd
masters
oldmasters
final
draft
12pt
11pt
10pt
Description
Selects formatting for doctoral dissertation
(default)
Selects formatting for Master’s thesis submitted in 2012 or later: changes the word
“dissertation” on the title page to “thesis.”
Selects formatting for Master’s thesis submitted in 2011 or earlier: selects double
spacing and changes the word “dissertation” on the title page to “thesis.”
Uses pseudo-double-spacing for Master’s
theses submitted in 2011 or earlier (default)
Uses single-spacing throughout the document
Sets the default font size to 12 points (default)
Sets the default font size to 11 points. Note:
This option should be used only for draft
copies (e.g., to save paper). The final submitted copy must use 12-point fonts or
larger
Sets the default font size to 10 points. Note:
This option should be used only for draft
copies (e.g., to save paper). The final submitted copy must use 12-point fonts or
larger
Table 1: Document class options
4
fairly simple set of commands. This facility could be a little easier, but compared to an earlier state of affairs, it’s pretty slick. The
format of the front matter is specified quite explicitly in the documents “Dissertation Filing Guide” and “Thesis Filing Guide” produced
by the UC Berkeley Graduate Division and available on the web at
http://grad.berkeley.edu/policies/. The current version of the
class is based on the April 2012 and February 2012 versions of the
dissertation and thesis documents, respectively.
A complete example of the use of the front matter commands can be
found in the sample dissertation distributed with the class. Generally,
the part of the LATEX file that generates the front matter consists of
the following portions:
• Declarations of text strings
• Macros to generate the title, approval, and copyright pages
• abstract environment
• frontmatter environment
These portions are described in the following subsections.
3.1 Declarations of Text Strings
To use the front matter macros and environments, you must first declare the text strings listed in Table 2. This is done by invoking the
relevant macro with the string as its argument; for example, \title{
Snakes in Ireland}.
3.2 Title, Approval, and Copyright Pages
The title, approval, and copyright pages have extremely rigid formats
that allow them to be generated automatically once the above declarations have been made. To generate them, invoke the macros
\ maketitle
\ approvalpage
\ copyrightpage
You should probably invoke them in that order, because that’s the
order required by the guidelines. The approval page should not be part
of the submitted thesis, but the \approvalpage macro may be used to
generate the required approval page to be printed and submitted with
the thesis.
5
Macro
Description
\title
\author
\degreeyear
\degreesemester
\degree
\chair
\cochair
\othermembers
\numberofmembers
\field
\campus
Dissertation title
Your name as registered with UC (usually
with full middle name)
Year your dissertation will be granted
Semester (or term) your degree will be
granted
The title of your degree (e.g. Doctor of Philosophy)
Title and name of your committee chair
(e.g. “Professor Michael A. Harrison”)
Title and name of your committee co-chair
(use with \chair, if you have a co-chair).
The names of the other members of
your committee separated by linebreaks
(e.g.
Professor Susan L. Graham\\
Professor Jim Pitman)
The number of members on your committee.
This defaults to 3 (and thus is optional) and
can be any value between 3 and 6. It affects
the number of lines on the approval page
and the space between them.
The official title of your field. This is usually your department’s name, but at Berkeley, most Engineering degrees have a more
complex name. Be sure to check the guidelines for any special twists on the name of
your field.
The name of your UC campus. This should
be capitalized (e.g. Berkeley). This is optional, and defaults to Berkeley.
Table 2: Declarations for Front Matter
6
3.3 Abstract Environment
Because you have to provide the text of the abstract, only the title can
be generated automatically. So, there is an abstract environment. It
generates the title and numbers the abstract in arabic numerals and
makes sure that it starts on new page.
The advisor’s signature no longer is required (or allowed) for the
abstract.
3.4 Other Front Matter
The remaining front matter (dedication, table of contents, lists of figures and tables, acknowledgements) must be put inside the frontmatter
environment, which ensures that page numbering is handled properly. Within this frontmatter environment, you put the environments and commands for the rest of the front matter. There are environments for dedication and acknowledgements, and the standard
LATEX commands for producing \tableofcontents, \listoffigures,
and \listoftables should also go inside the frontmatter environment.
The standard LATEX commands are well documented in the LATEX
manual. You may have to hand edit the .lof (list of figures) and .lot
(list of tables) files to make verbose captions more suitable for this
front matter. Once you do this, remember to use the \nofiles macro
to keep them from getting overwritten.
The ucbthesis class provides acknowledgements and dedication
environments, which produce corresponding sections in the front matter and make them start on a new page. The acknowledgements environment also puts the word “Acknowledgements” in large, bold, centered text at the top of the page. For formatting the dedication page,
you’re on your own. After all, the dedication is a kind of poetry and
there’s no predicting the right way to format poetry.
4 Obsolete Environments and Commands
Previous (unreleased) versions of the ucbthesis (and ucthesis) classes
defined environments for producing small tables with single spacing.
These environments are no longer necessary, since standard LATEX now
handles the situation properly. Replace the \begin{...} commands
as indicated in Table 3, and change the corresponding \end commands
accordingly.
The ucthesis class also provided commands \smallssp and
\scriptsizessp; these should now be changed to \small\SingleSpacing
and \scriptsize\SingleSpacing, respectively.
7
Environment
Use Instead
smalltabular
smalltabular*
scriptsizetabular
scriptsizetabular*
\small\begin{tabular}
\small\begin{tabular*}
\scriptsize\begin{tabular}
\scriptsize\begin{tabular*}
Table 3: Obsolete environments
5 Installing the ucbthesis Class
To install the ucbthesis class, you need to install the file ucbthesis.cls in your LATEX class file repository. This generally should go
in a directory TEXMF/tex/latex/ucbthesis (where TEXMF is the base
of the texmf tree). Or, it can also be placed in the directory that you
use when running LATEX on your thesis.
You should also install the documentation files
README
ucbthesis.tex
ucbthesis.pdf
ucbtest.tex
ucbtest.bib
in a similar directory under the documentation directory, generally
TEXMF/doc/latex/ucbthesis.
6 Modification History
Version 3.3 was the initial release of ucbthesis (it was forked from
ucthesis, hence the unusual version number). The package ucthesis
was created for non-electronic submissions, and should no longer be
used, except for printing out older theses. Version 3.3 was distributed
only within Berkeley.
Version 3.4 switched to using the memoir class, eliminated the
smalltabular, smalltabular*, scriptsizetabular, and scriptsizetabular*
environments and the \smallssp and \scriptsizessp commands,
and added support for co-chairs on the dissertation/thesis committee.
It was also modified for release on ctan.
8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 Page Mode : UseOutlines Author : Title : Subject : Creator : LaTeX with hyperref package Producer : LuaTeX-0.70.2 Create Date : 2012:08:06 15:51:02-07:00 Modify Date : 2012:08:06 15:51:02-07:00 Trapped : False PTEX Fullbanner : This is LuaTeX, Version beta-0.70.2-2012062814 (TeX Live 2012) (TeX Live 2012) kpathsea version 6.1.0EXIF Metadata provided by EXIF.tools