Tl1037 Shure PSM 600 Specification Sheet Us Pro Psm600wireles Specsheet

Shure PSM 600 Specification Sheet us_pro_psm600wireles_specsheet Shure - PSM 600 - Specification Sheet

Shure PSM 600 Specification Sheet us_pro_psm600wireles_specsheet Shure - PSM 600 - Specification Sheet

User Manual: Shure PSM 600 Specification Sheet Shure - PSM 600 - Specification Sheet

Open the PDF directly: View PDF PDF.
Page Count: 2

PSM600 WIRELESS IN-EAR
MONITOR SYSTEM
TL1037 (CI)
©2004, Shure Incorporated
PSM600 WIRELESS IN-EAR MONITOR SYSTEM
SYSTEM FEATURES
The Shure PSM600 Personal Stereo Monitor System is a UHF
wireless, two-channel stereo, monitor system designed for on-
stage applications. The PSM has several advantages over on-
stage loudspeaker monitors: it is less visible, has better sound,
allows freedom of movement, and reduces the chances of feed-
back. It is a versatile system, designed for use in many different
sound reinforcement applications: public address, live music, the-
ater, and electronic news gathering (ENG).
The wireless system is frequency compatible with other Shure
UHF and VHF wireless systems.
FEATURES
• Wireless and Hardwired versions available
•Stereo or MixMode
Ô
control for custom monitor mixes.
• Eight LED input level meter
• Up to10 compatible wireless frequencies for 10 separate
mixes.
• Frequency compatible with all Shure Wireless systems
(country dependent).
• +4 dBu/-10 dBV input level select switch on P6T.
• Combined 1/4-in./XLR connectors on P6T for balanced or
unbalanced connections.
• Loop out connectors on P6T wireless transmitter for multi-
ple mix setups and easy installation.
SPECIFICATIONS
WIRELESS SYSTEM
RF Carrier Frequency Range
626 to 862 MHz (country dependent)
Audio Frequency Response
50 to 15k Hz (+0, -3 dB re 1KHz); earpiece dependent
Operating Range
300 ft. (environment dependent)
Modulation
FM ±35 kHz Deviation (Nominal), MPX Stereo
Channel Separation
35 dB typical
Total Harmonic Distortion
0.8% typical (Ref. ±35 KHz deviation)
Signal-to-Noise Ratio
80 dB typical (A-weighted)
Operating Temperature
+0° C to +50° C (32° F to 122° F)
Polarity
P6T audio inputs to P6R audio outputs: Non-inverting
XLR: pin 2 positive with respect to pin 3
1/4-in. TRS: Tip positive with respect to ring
Certification
P6T: Type Accepted under FCC Parts 74. Certified by IC in
Canada under RS 123. UL and cUL Listed to UL 813 and CSA
C22.2 No. 1.
P6R: Approved under the Notification provision of FCC Part 15;
Certified by IC in Canada under RS 123.
626.475
632.550
P6T TRANSMITTER
PA705
REMOTE
ANTENNA
P63 WIRELESS
RECEIVER
E3 EARPHONES
PA705
REMOTE
ANTENNA
PA760 ANTENNA COMBINER
PA755
PA750
2
PSM600 WIRELESS IN-EAR MONITOR SYSTEM SPECIFICATION SHEET
P6T WIRELESS TRANSMITTER
RF Output Power
100 mW (+20 dBm) typical conducted (country dependent)
Modulation Limiter
Internal peak limiter (>10:1 compression)
Antenna
External whip, 50 W BNC connector
Power Requirements
P6T: 108 to 132 VAC, 50/60 Hz
P6TE: 216 to 264 VAC, 50/60 Hz
Current
115 mAAC maximum at 120 VAC
55 mAAC maximum at 240 VAC
Fuse
P6T: 120 VAC, 160 mA/250 V time delay
P6TE: 240 VAC, 80 mA/250 V time delay
Dimensions
44.5 mm X 197.4 mm X 238.1 mm (1 3/4 in. X 7 3/4 in. X 9 1/2 in.)
Net Weight
3.30 Kg (3 lbs., 4.8 oz.)
P6R WIRELESS RECEIVER
RF Sensitivity
1.2 uV typical
Image Rejection
70 dB typical
Spurious Rejection
60 dB typical
Squelch Threshold
4 mV typical
Antenna Input Impedance
50 W typical
Antenna
External, threaded connector
Power Requirements
9 V battery
Battery Life
4-6 hours, volume dependent
NOTE: When using the receiver in very cold temperatures (be-
low 35° F), take precautions to keep the unit as warm as possi-
ble. Battery life may decrease at lower temperatures.
Audio Output Connector
3.5 mm Stereo (Left = tip, Right = ring, Ground = sleeve)
Minimum Load Impedance
16 W
Net Weight
0.52 lbs.
Overall Dimensions
27.18 mm X 64.52 mm X 85.09 mm
(1.070 in. X 2.540 in. X 3.350 in.)
E3 EARPIECES
Transducer Type
Balanced Armature
Sensitivity*
115 dB SPL/mW
Impedance*
26 W
Connector
Gold-plated, stereo, 3.5 mm (1/8-in.) plug
Cable Length
1.57 m (62 in)
PA760 WIRELESS ANTENNA COMBINER
UHF Carrier Frequency Range
620 to 662 MHz
System Gain
3 dB ± 1.5 dB from antenna input (Output ports 1-4)
Input/Output Port VSWR
Less than 1.6:1
Input Port Isolation
Greater than 25 dB
Intermodulation Distortion
-55 dBc
Third Order Intercept Point (3 OIP)
Greater than 25 dBm
Input/Output AC Line Voltage
85 to 120 VAC US
230 VAC Germany, U.K.
Impedance (all BNC jacks)
50 W
Operating Temperature Range
-15 to +50° C
Overall Dimensions
44.5 mm high x 197.4 mm wide x 238.1 mm deep (1.75 in. x
7.770 in. x 9.4 in.)
Net Weight
1.34 Kg (2 lbs, 15.4 oz)
Input/Output Connector Type
BNC-type, 50 W, (4 input, 1 output)
Certification
Type Accepted under FCC Parts 74. Certified by IC in Canada un-
der RS 123. UL and cUL Listed to UL 813 and CSA C22.2 No. 1.
PA705 REMOTE ANTENNA
RF Frequency Range
620-870 MHz
Antenna Gain
>7dB
3dB Beam Width: 90 degrees (+/- 45 degrees)
Reception Pattern
Directional; Cardioid
Connector
50 W,Female, BNC-type
Dimensions
10.6 in. (269.24 mm) H X 10.64 in. (270.18 mm) W X 1.0 in.
(25.4 mm) D
Swivel Adapter
Positive-action, break resistant, adjustable from 0 to 90 de-
grees, with standard 5/8 in. -27 thread

Navigation menu