Dongguan Digital AV Technology SONICA Wi-Fi Speaker User Manual
Dongguan Digital AV Technology Corp., Ltd. Wi-Fi Speaker Users Manual
Users Manual
Sonica 3 Wi-Fi Speaker Caution (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B To reduce the risk of fire or electric shock, do not expose this appliance to rain or digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to moisture. Dangerous high voltages are present inside the enclosure. Do not open provide reasonable protection against harmful interference in a residential the cabinet. Refer servicing to qualified personnel only. installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may The apparatus shall not be exposed to dripping or splashing and that no objects cause harmful interference to radio communications. However, there is no filled with liquids, such as vases shall be placed on the apparatus. guarantee that interference will not occur in a particular installation. If this The lightning flash with arrowhead symbol, within an equilateral equipment does cause harmful interference to radio or television reception, triangle, is intended to alert the user to the presence of uninsulated which can be determined by turning the equipment off and on, the user is “dangerous voltage” within the product's enclosure that may be of sufficient encouraged to try to correct the interference by one or more of the following magnitude to constitute a risk of electric shock to persons. measures: The exclamation point within an equilateral triangle is intended to Reorient or relocate the receiving antenna. alert the user to the presence of important operation and Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to maintenance (servicing) instruction in the literature accompanying the appliance. which the receiver is connected. FCC Statement Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the Any unauthorized changes or modifications to this equipment would void the following two conditions: (1) This device may not cause harmful interference. user’s authority to operate this device. Important Safety Information 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. mounting requires three M4.0 standard screws, please follow the 5) Do not use this apparatus near water. installation manual. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer, or sold with the apparatus. When a cart is manufacturer’s instructions. used, use caution when moving the cart/apparatus Do not install near any heat sources such as radiators, heat registers, combination to avoid injury from tip-over. 8) 10) plug, receptacle, and the point where it exits from the apparatus. 11) 12) stoves, or other apparatus (including amplifiers) that produce heat. 9) Protect the power cord from being walked on or pinched, particularly at 13) Do not defeat the safety purpose of the polarized or grounding-type plug. Only use attachments/accessories specified by the manufacturer. Wall Use only with the cart, stand, tripod, bracket, or table specified by the Unplug this apparatus during lightning storms or when unused for long periods of time. A polarized plug has two blades with one wider than the other. A 14) Refer all servicing to qualified service personnel. Servicing is required grounding type plug has two blades and a third grounding prong. The wide when the apparatus has been damaged in any way, such as power-supply blade or the third prong is provided for your safety. If the provided plug cord or plug is damaged, liquid has been spilled or objects have fallen into does not fit into your outlet, consult an electrician for replacement of the the apparatus, the apparatus has been exposed to rain or moisture, does obsolete outlet. not operate normally, or has been dropped. Setting Up Step1. Plug power for your speaker(s). Step2. Connect one of your smart devices to your home network. Step3. Download Sonica Controller in Apple App Store or Google Play Store on your smart phone or iPad. For PCs, please visit www.oppodigital.com. Step4. Open Sonica Controller and follow the guide to complete connection Bluetooth AirPlay/DLNA When you are going to play music from your device When you are going to play music from your device through Bluetooth, turn on the Bluetooth of your device through AirPlay/DLNA, make sure Sonica stays the same in settings and then pair with Sonica. You can play network with your device. You can play AirPlay/DLNA Bluetooth music with or without Sonica Controller. music with or without Sonica Controller. Group Playback Multi-room Playback Multi-devices control Sonica support multi-room expansion, they can either Sonica support multi-devices manipulation, one speaker play the same song simultaneously or play different song can be controlled by multiple devices. individually when changing the group status. Specification Model Name Power Supply Power Consumption Size (mm) Weight Wi-Fi Protocol Bluetooth Standard AUX Max Input Audio Formats Drivers Operating Condition Screws Size Sonica 3 100 V - 240 V ~ 50-60 Hz 35 W / 6 W (Stand by) 301 (L) * 147 (W) * 135 (H) 2.4 kg (5.3 lb) 802.11.a/b/g/n/ac Bluetooth 4.1 2 Vrms AAC, AIF, AIFF, APE, FLAC, M4A, MP2, MP3, OGG, WAV, WMA Subwoofer x 1 Middle-range and tweeter x 2 Passive Radiator x 2 Temperature 5℃ - 35℃ Humidity 15% - 75% (No Condensation) Diameter: M4 Pitch: 0.7mm RF Exposure Information and Statement This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules and RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help - This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:e0dd8698-bf0c-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:08:22 04:14:02Z Create Date : 2017:08:22 04:14:02Z Creator Tool : UnknownApplication Document ID : uuid:e0dd8698-bf0c-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools