Dongguan Earson Audio Technology WB-1 Wrist Bluetooth speaker User Manual
Dongguan Earson Audio Technology Co., Ltd Wrist Bluetooth speaker
Contents
- 1. user manual
- 2. User manual
User manual
INTRODUCTION
Thank you for purchasing your Jambanz wearable
speaker. This product is designed to provide high quality
wireless sound for your iPad™, iPhone™, iPod™, computer
or other Bluetooth® audio device. This Quick Bluetooth
Connection Guide explains the basic operation and care of
the unit. Please read them carefully and keep for future
reference.
Maintenance
• Store your Jambanz bracelet in its “flat” state, on a level surface away
from sources of direct sunlight or excessive heat.
• Clean your unit with a soft cloth lightly moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials can damage the surface of the unit.
Included in Box
• One Jambanz Slap Bracelet
• One Jambanz micro Bluetooth speaker
• Micro USB to USB charging cable
Power Button
Status Light
Band
Volume -/+
Jambanz speaker
SIDE 1
SIDE 2
SLAP»SYNC»JAM
Charging the Unit
1. Plug the micro USB directly into your Jambanz micro speaker.
No need to remove the speaker from the band.
2. If the wire is plugged into the speaker correctly, you should hear
“Jambanz Charging”
3. Once fully charged, you will hear “Jambanz Charged” and the small blue
light will glow steadily.
4. When the light starts to blink it means the battery is low and changing
will be necessary soon.
Using Bluetooth: Pairing Your Device
1. Charge your Jambanz Micro speaker for at least 5 hours before your first
use or until the speaker says “Jambanz Charged.”
2. Turn on Bluetooth capability on your device and make it discoverable
(see your device’s instructions to add or setup a Bluetooth device).
3. To pair the Jambanz, PRESS and HOLD the POWER button until you hear
“Jambanz On, Hold to Pair.”
4. On your Bluetooth device, “Jambanz” should appear in your list of
Bluetooth devices. If it doesn’t appear, switch Bluetooth off and back on
again. Select “Jambanz” in the list of devices.
5. When pairing is successful, the device will say “Jambanz Paired, Ready
to Jam” and the blue light will glow steadily. Once paired, your device
should link to the Jambanz whenever it’s turned on within range.
Playing Audio Via Bluetooth: Using the Jambanz
1. Press the play or pause audio from your Bluetooth device.
2. Use the Volume +/- Buttons on your device or your Jambanz
to adjust volume.
3. When done listening, press the Power Button to turn the unit off,
wait until you hear “Jambanz OFF”
SLAP»SYNC»JAM
)&&3DUW
1RWH7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLP
LWVIRUD&ODVV%GLJLWDOGHYLFHSXUVXDQWWRSDUWRIWKH)&&5XOH
V7KHVHOLPLWVDUHGHVLJQHGWRSURYLGHUHDVRQDEOHSURWHFWLRQDJDLQVW
KDUPIXOLQWHUIHUHQFHLQDUHVLGHQWLDOLQVWDOODWLRQ7KLVHTXLSPHQWJ
HQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQV
WDOOHGDQGXVHGLQDFFRUGDQFHZLWKWKHLQVWUXFWLRQVPD\FDXVHKDUPIX
OLQWHUIHUHQFHWRUDGLRFRPPXQLFDWLRQV+RZHYHUWKHUHLVQRJXDUDQWH
HWKDWLQWHUIHUHQFHZLOOQRWRFFXULQDSDUWLFXODULQVWDOODWLRQ,IW
KLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQ
UHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGR
QWKHXVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHR
UPRUHRIWKHIROORZLQJPHDVXUHV
ü5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD
ü,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
ü&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWK
DWWRZKLFKWKHUHFHLYHULVFRQQHFWHG
ü&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEM
HFWWRWKHIROORZLQJWZRFRQGLWLRQVWKLVGHYLFHPD\QRWFDXVHKD
UPIXOLQWHUIHUHQFHDQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFH
UHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ
You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void your authority to
operate the equipment.