Dongguan Hele Electronics QCY-S1 Bluetooth Headset User Manual 2017 8 11 QY33
Dongguan Hele Electronics Co., Ltd. Bluetooth Headset 2017 8 11 QY33
User manual
Start Up How to Charge How to Connect Function Answer Call Tap MFB to answer incoming call(LED blinks blue promptly). Last Number Redial Double tap MFB when standby. Notes: last number dialing out may vary with different cellphone systems. Skip Track When listening to music, hold +/- to skip track forward/backward. Hold Tap LED Vol+ MFB Hold MFB to trigger pairing mode(LED blinks red and blue promptly). For the first time use, the pairing mode will be auto triggered once powering on. Otherwise, please hold MFB until LED blinks red and blue. VolUSB port a.m. 1. Refer to How to Connect to connect with phone1 then turn off the Earphones. 2. Hold MFB until LED blinks red and blue. On phone2, search for QCY-QY33 and tap to connect. a.m. Tap MFB to answer incoming call on phone1. If there is another incoming call on phone2 meanwhile, tap MFB to activate call on phone2 while put the first one on hold. Double tap MFB to switch between active and held calls. BLUETOOTH Available Devices Visibility Visible to all Bluetooth devices nearby Hold Available Devices Available Devices QCY-QY33 QCY-QY33 Phone2 3. Once connection with phone2 has been done, re-confirm connection with phone1. Now multi-points connection has been finished. a.m. BLUETOOTH Visibility Visible to all Bluetooth devices nearby Device name Available Devices QCY-QY33 Play/Pause When standby, tap MFB to play and tap it again to pause. Available Devices QCY-QY33 Phone1 CSR Bluetooth V4.1 offers you with new experience in wireless world. Battery with large capacity provides up to 8 hours calling. Weight: 13g Operation range: 10m Bluetooth version: V4.1 Charging time: 1 or 2hr Standby time: approx. 220hr When standby, hold MFB for 1s to activate voice assistant (like Siri). Switch Audio Output Between Earphones and Cellphone Hold MFB for 1s when calling. Music time: approx. 8hr Bluetooth profile: HFP/A2DP/HSP/AVRCP Battery capacity: 3.7 120mAh Battery type: li-ion Input parameter:5V Mute on Volume Control Double tap MFB when calling. Tap +/- when calling or listening to music. 100mA Double tap Hold Tap When charging, hold MFB until LED blinks red and blue. After Service and Support Features Basic Parameter Voice Assistant Turn on Bluetooth QCY-QY33 Sophisticated water-proof makes the earphones sweat resistant in workout. Turn on Bluetooth Device name Hold MFB for 1s to to ignore incoming call(LED blinks blue promptly). Hold Visible to all Bluetooth devices nearby On cellphone, search for QCY-QY33 and tap to connect. Three-Way Calling and Switch Between two Calls Ignore Call BLUETOOTH Visibility QCY-QY33 Multi-Points Connection Factory Setting Turn on Bluetooth Device name Available Devices Sports Bluetooth Earphones Low battery will be warned by red blinking LED and voice prompt. LED will be solid red, when charging and turn to blue once fully charged. Hold Double tap 1.Warranty Period 1)Returning: 1 year after you purchase this item. 2)Repairing: 2 years after you purchase this item. 2.Free Returning will Only be Accessed under All of Following Circumstances 1)1 year after you purchase this item. 2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card). 3)Required item has to be with full package and accessories. 4)Malfunction has to be caused by quality deficiencies. Notes:Exchanged item will have the same model No. and spec. as your required one’s. 3. Free Repairing will Only be Accessed under All of Following Circumstances 1)2 years after you purchase this item. 2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card). 3)Malfunction has to be caused by quality deficiencies. Free repairing & returning will not be accessed under following circumstances A: Item is out of warranty period or effective sales receipt and warranty card fail to be provided. B: Breakdowns of housing, bags, gifts and accessories or any non-functional faults. C: Unauthorized disassembly, breakdowns caused by improper operation or using in environment which is forbidden in user’s manual. D: Artificial damages(including but not limiting to leaking, damped, dropping off, squeezing, breaking, burning and distortion). E: Faults caused by force Majeures(such as earthquake, fire and flood). Hazardous substances and their contents in the item Hazardous Substances Part Name(Pb)(Hg)(Cd)(Cr(VI))(PBB) (PBDE) Main body Battery Ear tips Accessories Charging cable This form is made by SJ/T 11364 regulation. O:means that hazardous substance content in the homogeneo us materials of this part is within the limitsof GB/T 26572 regulation. X :means that hazardous substance content in, at least,one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation. Lifespan: As the booklet states, the eco-lifespan of the item is 5 years while using it in normal ways. During the period, no dangerous material will be leaked. The item must be recycled by the local law. Tips 1. Please read this manual carefully prior to using the device and keep the manual properly. Caveats 1.Never disassemble or modify your headset for any reasons to avoid any damages and danger. 2. For the first time use, please fully power up both 2.Do not store the headset in extreme temperatures cause red LED solid of the charger or the charger 3.Avoid using the indicator close to the eyes of children up the charger before using. 4.Do not use this headset during a thunderstorm to avoid "pairing mode", if it can not be spotted by cellphone. 5.Do not use harsh chemicals or strong deterge nts to unconnected for a long time. You may need to set 6.Keep the headset dry. cellphone and charger.Low battery of charger will can not power up for earphone. So please power 3. Please be sure that your Bluetooth earphone is in As the device will exit "pairing mode", if unpaired or it to "pairing mode" again. Supposing any program error occurs in cellphone or this device, please restart cellphone or this device, or reset this device to factory setting. 4. White LED will be solid during charging while off once fully charged, the charging process will last about (under 0℃ or over 45℃). or animals. irregular function and increased risk of electric shock. clean the headset. Notes: Please arrange using time properly since your hearing may be damaged by using the device for along time. 2 hours.(Bad contact caused by improper operation or other reasons may switch off white LED even when charging, which results in incomplete charge. So please plug in the charger properly and keep stable charging until white LED is off.) For any after service, please contact local distributor Perform standard:Q/HL 1-2016 Web: en.qcy.com Manufacturer: Dongguan Hele Electronics Co.,Ltd. Address: Dalingya Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province(QCY Environmental Zone, Dalingya No.5, Yuehui Road)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Format : application/pdf Title : 2017.8.11 QY33英文说明书 Metadata Date : 2017:09:12 16:01:42+08:00 Modify Date : 2017:09:12 16:01:42+08:00 Create Date : 2017:08:11 11:36:36+09:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Thumbnail Width : 256 Thumbnail Height : 132 Thumbnail Format : JPEG Thumbnail Image : (Binary data 12006 bytes, use -b option to extract) Instance ID : uuid:6191bea5-af1c-4d77-9c80-55fdaaab0789 Document ID : xmp.did:4ed94795-3815-6e46-a0ac-a9e280928786 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:e7adf54d-fb97-7d42-aeb8-3add587a5bea Derived From Document ID : xmp.did:e7adf54d-fb97-7d42-aeb8-3add587a5bea Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:CE3BE56015F0E511B87CEFB17AF16CF3, xmp.iid:4ed94795-3815-6e46-a0ac-a9e280928786 History When : 2016:03:22 18:03:51+08:00, 2017:08:11 11:36:31+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2015 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 503.741866 Max Page Size H : 285.206369 Max Page Size Unit : Millimeters Font Name : FZLTXHK--GBK1-0, SourceHanSansCN-Medium, SourceHanSansCN-Light, SourceHanSansCN-Regular, SourceHanSansCN-Normal Font Family : 方正兰亭纤黑, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN Font Face : Regular, Medium, Light, Regular, Normal Font Type : TrueType, Open Type, Open Type, Open Type, Open Type Font Version : 1.00, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930 Font Composite : False, False, False, False, False Font File Name : FZLTXHK.ttf, SourceHanSansCN-Medium_0.otf, SourceHanSansCN-Light_1.otf, SourceHanSansCN-Regular_0.otf, SourceHanSansCN-Normal_0.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 8 C, PANTONE Cool Gray 7 C, PANTONE Cool Gray 9 C Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE 714 C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : LAB Swatch Groups Colorants L : 77.254898 Swatch Groups Colorants A : 27 Swatch Groups Colorants B : 50 Producer : Adobe PDF library 15.00 Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : Administrator, Bounding Box : 13 147 1168 742 Container Version : 11 Creator Version : 19 Image Height : 595 Image Width : 1155 Image Size : 1155x595 Megapixels : 0.687EXIF Metadata provided by EXIF.tools