Dongguan Hele Electronics T1PRO Bluetooth Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3721624
Application ID	ReBighrIAiuK2KzAYMKysQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	137.28kB (1715957 bits)
Date Submitted	2018-01-20 00:00:00
Date Available	2018-01-20 00:00:00
Creation Date	2017-09-27 14:20:34
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-11-06 14:08:03
Document Title	2017.9.27 Q29改Q39 英文说明书 CSR
Document Creator	Adobe Illustrator CC 2015 (Windows)

材质：105g哑粉过哑油
工艺：骑马钉，单钉
57mm
Overview
Change EarTip
Large
57mm
How to wear
Middle
Multi-function Button(MFB)
Play/Pause
Tap
Skip Track Forward
Double tap MFB to track forward.
Remove Insulated Sticker
Visibility
Visible to all Bluetooth devices nearby
Device name
Pogo Pins
Play Media in both EarBuds
Mono Mode
Power-on
Hold MFB for 1s(LED will turn to white)
Activate call waiting facility on your cellphone.(you
may refer to cellphone's manual for more details.)
1. Activate call: Whenever you are on a call and have
another incoming call from another cellphone at the
same time,you may tap MFB to activate the second
call while put the first one on hold.
Ignore call: Whenever you are on a call and have another
incoming call from another cellphone at the same time,
you may hold MFB for 1s to ignore the second call while
keep talking on the first one.
2. Switch between held call and active call: Double tap
MFB to switch between the two calls.
End call: During three way calling, hold MFB for 1s to
end the active call while re-activate the held one.
Adjust its end towards your mouth.
Charging for Earphones
Low battery will be warned by voice prompt.
(LED will be solid red when charging and turn off once fully
charged.)
1. Remove the stickers on both EarBuds and plug the
EarBuds back in Charging Case as a way to activate EarBuds.
Notes: if EarBuds are unable to be charged, please charge for the
charging case via USB cable first(for more details, please refer
the following steps).
Charging for the Charging Case
LED will be solid red when charging and turn to blue once
fully charged.
Feature
Bluetooth 4.2
With the new 4.2 Bluetooth version,Q29 brings
about more HD experience than ever.
TWS style delivers stereo effect with no bound
of wire.
Special Case allows the earphones to be charged
even when stored.
Parameters
Hold MFB for 1s to activate voice assistant(like Siri)
Power on single EarBud(LED will turn to white) then tap
MFB to reconnect to the last connected device.(the EarBud
was once connected with device before.)
2. Take out the right EarBud and hold its MFB for 5s to trigger
pairing mode then wait for auto connection with cellphone.
After the auto connection is done, take out the left EarBud
and hold its MFB for 1s to power on. Now wait until two
EarBuds auto connect with each other(LED blinks red and
white for 1s).
Plug EarBuds back into Charging Case.(Pogo pins should
be contacted properly.)
Charge the case via USB cable
Bluetooth version:V4.2
Model number: QCY-Q38
Weight: 5.3g
Stand-by time: Approx.80hr
Talking time: Approx. 3hr
Battery type: Li-polymer
Size: 25.3×17.3×29mm
Operation range: 10m(no obstacle)
Bluetooth profile:HFP/HSP/A2DP/AVRCP
Battery capacity(EarBud): 3.7V 43 mAh
Battery capacity(Charging Case):3.7V 220mAh
Input parameter(Charging Case):5V
250mA
Take out both two EarBuds and hold MFBs on both of them
for 1s to power on. Then double tap MFBs on both EarBuds
separately and wait until two of them auto connect with each
other (LED blinks red and white for 1s).
After Service and Support
1. Warranty Period
1)Returning: 1 year after you purchase this item.
2)Repairing: 2 years after you purchase this item.
2. Free Returning will Only be Accessed under All of Following
Circumstances
1) 1 year after you purchase this item.
2)Three completed guarantee receipts have to be provided
to distributor(item model No., sales date and item serial
No. shall be displayed on invoice and warranty card).
3)Required item has to be with full package and accessories.
4)Malfunction has to be caused by quality deficiencies.
Notes: Exchanged item will have the same model No. and
spec. as your required one’s.
3. Free Repairing will Only be Accessed under All of Following
Circumstances
1) 2 years after you purchase this item.
2)Three completed guarantee receipts have to be provided
to distributor(item model No., sales date and item serial
Factory Setting
Hold MFB/s for 5s(LED/s will blink red and white) when EarBud/s
charged. Once reset EarBud/s to factory, all pairing list will be
erased.
Free repairing & returning will not be accessed under
following circumstances
A: Item is out of warranty period or effective sales receipt and
warranty card fail to be provided.
B: Breakdowns of housing, bags, gifts and accessories or any
non-functional fault.
C: Unauthorized disassembly, breakdowns caused by improper
operation or using in environment which is forbidden in
user’s manual.
D: Artificial damages(including but not limiting to leaking,
damped, dropping off, squeezing, breaking, burning and
distortion).
E: Faults caused by force Majeures(such as earthquake, fire
and flood).
Power-on
Hold MFB for 1s(LED turns to white)
Hold
Play/Pause
When two EarBuds are connected with each other and
cellphone, tap MFB on either EarBud to play/pause music.
Skip Track Forward
Double tap MFB on either EarBud to track forward.
No. shall be displayed on invoice and warranty card).
3) Malfunction has to be caused by quality deficiencies.
Operation in Mono Mode
Hold for 5S
Power-off
Granting two EarBuds connect with each other, hold MFB
on either EarBud for 3s to power off both of them(LED will
turn to red for 2s)
Available Devices
MIC
It is suggested that you try Middle EarTip first as it
fits most people.
Single EarBud Re-connecting with Cellphone
MI
QCY-Q38
Voice Control
Double Tap
BLUETOOTH
Turn on Bluetooth
Operation in Stereo Mode
Available Devices
Three Way Calling
Tap MFB to play/pause music.
(Try the following step if you fail to build connection
between two EarBuds)
a.m.
Small
LED
TWS Bluetooth Earphones
TWS Mode
Hazardous substances and their contents in the item
Part Name
Main body
Hazardous Substances
（Pb）（Hg）（Cd）（Cr(VI)） （PBB）
（PBDE）
Battery
Ear tips
Accessories
Charging cable
This form is made by SJ/T 11364 regulation.
O：means that hazardous substance content in the homogeneo
us materials of this part is within the limitsof GB/T 26572
regulation.
X ：means that hazardous substance content in, at least,one
certain homogeneous material of this part is beyond the
limits of GB/T 26572 regulation.
说明书
105g哑粉过哑油
印刷，骑马钉
Power-off
Hold MFB for 3s(LED will be red for 2s)
1. Hold MFB on either EarBud for 5s to enter pairing mode.
(LED will blink red and white.)
2. On cellphone, search for "QCY-Q38" and tap to connect.
3. The connection has been completed.
Lifespan:
As the booklet states, the eco-lifespan of the item is 5 years
while using it in normal ways. During the period, no dangerous
material will be leaked. The item must be recycled by the local law.
Tips
1.Before using the headset, please read the manual
carefully and keep it for future references.
2.The headset need to be fully charged prior to first-time use.
3.If the headset is left unused for over two weeks, please
recharge it periodically.
4.Please use the chargers made by qualified manufacturer.
5.If the headset cannot be found by your phone, please
check whether it is in pairing mode; if left unconnected
for a long while, the headset will exit pairing mode,
please re-enter the mode; if a procedure error of your
phone occurs, reboot it; if a procedure error of the
headsetoccurs, reboot or reset it.
6. If the two units can not connect with eachother
automatically when switched on. Please hold the MFB
of both units until the white light is on then move them
approaching each other andwait for the connection
completed.
Hold
Ignore Call
Hold MFB for 1s to ignore incoming call.
Hold
Answer Call
Tap MFB to answer incoming call and tap it again to
end the call.
Notes: Only EarBud connected with cellphone is able
to deal with incoming call.
Tap
Caveats
1.Never disassemble or modify your headset for any
reasons to avoid any damages and danger.
2.Do not store the headset in extreme temperatures
(under 0℃ or over 45℃).
3.Avoid using the indicator close to the eyes of children
or animals.
4.Do not use this headset during a thunderstorm to
avoid irregular function and increased risk of electric
shock.
5.Do not use harsh chemicals or strong detergents to clean
the headset.
6.Keep the headset dry.
Notes: Please arrange using time properly since your hearing
may be damaged by using the device for a long time.
For any after service, please contact local distributor
Perform standard: Q/HL 1-2016
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Dalingya Industrial Zone, Daojiao Town,Dongguan
City, Guangdong Province(QCY Environmental Zone,
Dayaling No.5, YuehuiRoad)
Switching Audio Output between Cellphone and EarBud
When calling, you may hold MFB for 1s.
Hold
Mute On/Off
When calling, you may double tap MFB to switch mute
on/off.
Double Tap

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Title                           : 2017.9.27 Q29改Q39 英文说明书  CSR
Metadata Date                   : 2017:11:06 14:08:03+08:00
Modify Date                     : 2017:11:06 14:08:03+08:00
Create Date                     : 2017:09:27 14:20:34+09:00
Creator Tool                    : Adobe Illustrator CC 2015 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 168
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9538 bytes, use -b option to extract)
Instance ID                     : uuid:7b517c86-3b69-4f61-882a-299b9215a328
Document ID                     : xmp.did:3524c05e-589b-f34e-a42a-cb5df38b409f
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:9fffb810-6be1-458a-9f0c-fe31dee8b46b
Derived From Document ID        : xmp.did:d71c2900-e1da-5b48-acd4-ff24ee21a91a
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:F1AD6F2D62E6E511A3EADD173DA540A6, xmp.iid:3524c05e-589b-f34e-a42a-cb5df38b409f
History When                    : 2016:03:10 10:34:07+08:00, 2017:09:27 14:20:28+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2015 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 754.915337
Max Page Size H                 : 493.232657
Max Page Size Unit              : Millimeters
Font Name                       : FZLTXHK--GBK1-0, FZLTCHK--GBK1-0, SourceHanSansCN-Light, SourceHanSansCN-Normal, SourceHanSansCN-Regular, SourceHanSansCN-Medium, AdobeSongStd-Light
Font Family                     : 方正兰亭纤黑, 方正兰亭粗黑_GBK, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN, Adobe 宋体 Std
Font Face                       : Regular, Regular, Light, Normal, Regular, Medium, L
Font Type                       : TrueType, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : 1.00, 1.00, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : FZLTXHK.ttf, 兰亭粗黑 GBK.TTF, SourceHanSansCN-Light_1.otf, SourceHanSansCN-Normal_0.otf, SourceHanSansCN-Regular_0.otf, SourceHanSansCN-Medium_0.otf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 11 C, PANTONE Cool Gray 8 C, PANTONE Cool Gray 9 C
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : PANTONE Cool Gray 11 C, PANTONE Cool Gray 8 C, PANTONE Cool Gray 9 C
Swatch Colorant Type            : SPOT, SPOT, SPOT
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000
Swatch Colorant Mode            : Lab, Lab, Lab
Swatch Colorant L               : 36.470600, 57.647099, 50.196098
Swatch Colorant A               : 0, 0, 0
Swatch Colorant B               : -3, -2, -2
Producer                        : Adobe PDF library 15.00
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 17.0
For                             : Administrator,
Bounding Box                    : 18 -523 2121 840
Container Version               : 11
Creator Version                 : 19

EXIF Metadata provided by EXIF.tools