Dongguan Jinhongmei Electronics JHM-821 Shutter Camera User Manual
Dongguan Jinhongmei Electronics Co., Ltd Shutter Camera
user manual
JHM-821 Method of use
1：
Bluetooth Shutter
The instructions
*Smartphone software system upgrade may guide system timer is not compatible with
connection equipment
ON 1-2 is 822；ON 3 is 821；
2：
Positive: 1, the camera button, 2, LED lamp;
On the back: 1, the battery cover;
3：
model ：JHM-821
Connection mode: bluetooth 3.0
Link frequency：2.4GHz~2.4835GHz
distance ：10M
Working voltage ：3.0V
Working current ：0.8mA
Sleep current ：1.6~2uA
Battery capacity ：120mA
Product size ：40*25*26.5mm，
The service life of the battery：3~6months，
N.W：11g
Color ：black 、
4：
Method of use
Link
A. open the wave switch, power light flashing blue regularly LED light into the code,
Timer will automatically search condition, (shutdown method and way, boot)
B. open the connection of the smart phone bluetooth switch/smart devices, bluetooth
search
C. to find a bluetooth device name "Shutter Camera", click the timer and the connection of
intelligent equipment can be made
After the connection is successful, bluetooth self-timer blue links will put out lights said
success;
Taking pictures
In different systems of intelligent mobile phone/smart devices, using the timer will
automatic identification system, just press the same photograph photo press buttons
This product is compatible with Android 4.2.2 and iOS 6.0 above
intelligent equipment system!
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.