Dongguan Newmen Electronics Technology MS133OR Mouse User Manual User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	963150
Application ID	mrP8wbUvzALJlBUnt/65Ng==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.18kB (352270 bits)
Date Submitted	2008-07-01 00:00:00
Date Available	2008-07-01 00:00:00
Creation Date	2008-06-27 13:59:55
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-06-27 13:59:55
Document Title	Microsoft Word - User’s Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	paul

MS-133OR Wireless Mouse and MX-133 Dongle User’s Manual
1. Battery install
Take out battery from package, put battery into battery box of wirelss mouse as per correct
polarity of battery. When battery becomes low power, receiver's LED indicator will flash to
remind user to change battery.
A. Refer the below photo (A), take off receiver from the top down
B. Then take out battery cover, put battery into battery box as per correct polarity of
battery, red LED at bottom of wireless mouse lights up (Photo B)
C. Close battery cover, battery be successfully installed (Photo C)
(A)
(B)
(C)
2. Mouse(MS-133OR)& Dongle(MX-133) connect
The receiver and wireless mouse were well paired in factory, user can directly use.
A. Take out battery from package, insert the receiver into the USB port of computer, the LED
indicator of receiver will light up about 3 seconds then off, meanwhile computer will indicate
"new hardware found, automatically install"
B. You can use the mouse now.
If user wrongly operated, please redo above processes
Note:
Press the link button for 4 seconds, mouse will enter into sleep situation. To wake up the
mouse again, need to repress link button. This step will save battery power.
Link Button
3. Resolution adjust
Mouse working speed is able to adjust by yourself. There are two resolutions to select, 800DPI
and 1600DPI. Press both left and right buttons together for about 3 seconds, LED under scroll
wheel will flash. LED flashes slowly indicate 800DPI, quickly 1600DPI.
5. Dongle(MX-133) install
To save battery power, you may put the receiver into battery cover, battery power will be cut
off, which can prolong battery life.
Correct method for installing and taking off receiver:
Note: After battery is used for more than 2 months and cursor's moving speed becomes slow,
suggest user should change battery.
6.System Requirements
Works with windows 9X/ME/2000/XP/VISTA
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this equipment.
(Example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:06:27 13:59:55+08:00
Create Date                     : 2008:06:27 13:59:55+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User’s Manual.doc
Creator                         : paul
Document ID                     : uuid:fe992f8c-d31a-407d-ae35-d1b1c51acc48
Instance ID                     : uuid:2e71a546-2e37-4a58-b90c-df6141c013b5
Page Count                      : 3
Author                          : paul

EXIF Metadata provided by EXIF.tools