Dongguan Siyoto Electronics SMBT-1016 Bluetooth Headset User Manual SMBT 1016 Usermanual

Dong Guan SiYoTo Electronics CO.,LTD. Bluetooth Headset SMBT 1016 Usermanual

Manual

1zIntroduction The Bluetooth headset Bone SMBT-1016 is a portable hand free communication device with A2DP profile built on Bluetooth wireless technology. This headset is designed and manufactured in accordance with Bluetooth specification VR4.0 which supports adaptive frequency hopping and allows faster connection, the noise immunity within the wireless area network is better than the BT V2.1 Headset Product standard Bluetooth version：V4.0Talk tine:：up to 4 hours Standby time：up to 140 hours Battery standard：Rechargeable lithium polymer battery Power adapter output: DC5V 70mA Charging the headset Your headset uses a rechargeable battery,you must charge The battery fully before using the headset for the first time. 1. Plugging the charging cable in the USB charge port 2. The rde indicator lamp remains solid when charging. 3. The fully charging takes 1-1.5 hours 4. The red indicator lamp goes out and the blue indicator remains solid when charging completed Vo lum e -Volume + Buttun/Play MIC USB User ManualSMBT-1016
2Power on/off the headset a. To power on: press and hold multifunction button for about 4 seconds until blue light flashes. b. To power off: when headset is power on, press and hold multifun ction button for about 4 seconds indicator light goes off Voice Prompt a. When the headset is on, there will be the automatic voice prompt: power on b. When the headser is off, there will be the automatic voice prompt: power off c. When being connected successfully, there will be voice telling: connected d. When the battery is low,there will be voice telling: low battery e When the headser into the pairing mode , there will be the automatic voice prompt: pairing Pair to your Bluetooth phone 1.Pair the Bluetooth headset for the first time a. The distance between the Bluetooth headset and your Bluetooth phone would be better within 1 meter when pairing, the closer the better. b. Press multifunction button for 8 seconds, the headset into pair statuw . blinking in blue and red alternatively c. Set the phone to search for Bluetooth device. d. When phone finds headset, confirm by selecting “SMBT-1016” from list. e. Enter pin code “0000” when prompted by phone. f. Repeat steps B-E if the pairing was unsuccessful. g. If pairing was successful,starts to flash blue.
32. Connect to 2 devices at the same time a. Press multifunction button for 8 seconds the headset into pair status. Blinking in blue and red alternatively b. Set the phone to search for Bluetooth device. c. When phone finds headset confirm by selecting”SMBT-1016”from list.. d. Enter pin code “0000” when prompted by phone. e. Repeat steps B-E if the pairing was unsuccessful f. If pairing was successful,starts to flash blue .Note: Bluetooth headsrt off again,re-open at this time two Bluetooth Devices will connest automatically. Answering a call a. Press the answer key on your phone. b. Press the multifunction button on your headset. Ending a call a. Press the end key on your phone. b. Press the multifunction button once on your headset. Rejecting s call a. Press the end key on your phone. b. When ringing, press and hold the button 1s to reject the callRedialing the last called number Double press the multifunction button in 2 seconds when Headset is in standby mode. Activating voice dialing Your phone must support this function, when is standby Mode single press and hold the multifunction button. Playing music Listening to the music you can press play pause. press and hold the vol+ 1s to NEXT songpress and hold the vol- 1s to PRE songVolume control Volume keys to adjust the volume: Press the vol+ button to increase the sound, press the vol- button growth small
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the user’s authority to operate this equipment.

Navigation menu