Dongguan Taide BT015 Bluetooth speaker User Manual I

Dongguan Taide Industrial Co., Ltd. Bluetooth speaker I

Contents

15_BT015 UserMan

BLUETOOTH SPEAKER
Model: BT015
FCC ID: OYCBT015
INSTRUCTION MANUAL
WARNING
This appliance is intended for domestic household use only and should
not be used for any other purpose or in any other application, such as
for non domestic use or in a commercial environment.
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on
the apparatus.
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
Ventilation
Allow at least a 10 cm gap all around the product.
This apparatus is not suitable for use in a tropical climate.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
To protect the environment, use local recycling facilities for battery
disposal.
BATTERY HANDLING AND USAGE
The product is supplied with 1 rechargeable Lithium 3.7V 300 mA
battery incorporated in the product which is not accessible and cannot
be replaced. Therefore when the product reaches the end of its useful
life it must be disposed of at a recycling centre.
OVERVIEW
Mini-USB / 3.5 mm plug cable
OPERATION
1. Turn on the speaker. The blue indicator light will flash to detect
Bluetooth enabled devices near you.
The blue indicator light will stop flashing if no Bluetooth device is
detected within around 5 minutes.
2. Pair the speaker with the desired Bluetooth device. OR connect the
speaker to the music player using the 3.5 mm plug of the cable.
NOTE: If you need to pair the speaker with another Bluetooth device,
disconnect the speaker from the Bluetooth device already in use first.
Charging the speaker
The speaker has a built-in Lithium battery. The battery is rechargeable
and provides approx 2-hour continuous operation when fully charged.
Use the mini-USB connector of the cable to charge the speaker.
The red indicator light will illuminate.
The red indicator light will go out when the speaker is fully charged.
SPECIFICATIONS
5V 500 mA
Transmission distance: ≤ 10 m (It varies when the environmental factors
and the connected Bluetooth devices are different)
Built-in battery: Lithium battery
We apologise for any inconvenience caused by minor inconsistencies in
these instructions, which may occur as a result of product improvement
and development.
Disposal
As a responsible retailer we care about the environment. As
such we urge you to follow the correct disposal procedure for the
product, packaging materials and if applicable, accessories and batteries.
This will help conserve natural resources and ensure that the materials
are recycled in a manner that protects health and the environment.
You must follow laws and regulations about disposal. Waste electrical
products and batteries must be disposed of separately from household
waste when the product reaches the end of its life.
Contact the store where you bought the product and your local
authority to learn about disposal and recycling.
The batteries must be disposed of at your local recycling point.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

Navigation menu