Dongguan Taide BT034 BLUETOOTH SPEAKER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1766219
Application ID	gZCWpDS9KMJdMz8XYwPn6A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.94kB (111711 bits)
Date Submitted	2012-08-14 00:00:00
Date Available	2012-08-14 00:00:00
Creation Date	2012-07-26 18:44:33
Producing Software	Ultra PDF
Document Lastmod	2012-08-08 17:57:51
Document Title	Microsoft Word - EL70 for translation - revised June 25 12.docm
Document Creator	EL70 for translation - revised June 25 12.docm - Microsoft Word
Document Author:	wm05

User Manual
Please read this user manual before using.
Chapter I Features
▊Plug & Play features
Supports SD cards, USB storage devices and music devices (maximum 32G storage) compatible with
most MP3/WMA music files.
▊Support Bluetooth device
Support Bluetooth Version 2.0+EDR (A2DP=Advanced Audio Distribution Profile)
▊All-purpose interface
Compatible to PC and digital devices with 3.5mm audio interfaces
▊High-sensitivity, All-band, Professional FM stereo radio
Embedded high-sensitivity circular antenna.
▊Perfect presentation, High-class sound effect
2 inches full range speaker, realizing pass-through treble, magnetic mediant and powerful bass.
▊LCD display
65*40mm LCD display; easy to operate.
Chapter II Package Accessories
▊Package Included
BT034 Digital Multimedia Speaker: 1 ×Set
BT034 User Manual: 1 × Piece
3.5mm Stereo Audio (Antenna Cable: 1 × Piece)
USB Power Line: 1 × Piece
BL-5C rechargeable Battery:1050mAh
Remote Controller :1 × Piece
Chapter III
Category
Audio play
Screen
FM Radio
Audio
Technical Parameters
Item
Applicable memory
cards
Max capacity of
memory card
Audio format
Description
SD card
Applicable to memory card with capacity not exceed 32GB
Music in format of MP3/WMA in all kinds of usual bit rate
Type
LCD display
Size
65*40mm
Color
White on Blue, white LED backlight
Frequency Range
87MHz-108MHz
Channel No.
30
Receiving Antenna
Plug in 3.5MM stereo audio cable as external antenna
Searching Type
Auto/Semi-auto
Sound Track
2.0
System
External
Interface
Bluetooth
technical
Specification
Chapter IV
Speaker System
Full-range speaker, magnetic shield
Speaker Unit
2 inches *2
Power
3W*2
Frequency Response
100~20KHz
Sensitivity
600mv
Impedance
4 ohms
Audio Enhancement
SRS WOW and Microsoft sound effect
AUX Audio Input
3.5MM standard interface
DC-IN Power Input
Standard 3.5mm DC Input Interface
Card Type
SD card, USB Memory Device
Bluetooth Version
2.0+EDR(A2DP=Advanced Audio Distribution Profile)
≥10Meters （differ from the environment data and connected
Bluetooth devices）
transmission range
battery
BL-5C Rechargeable 1050mAh Battery
Dimension
Operating
temperature
W230mm x D156mm x H77mm
-5 ~ 40℃
Product Structure
1. MODE: Mode selection key
2.
: Play/Pause/Auto Search/Next
3.
1: Alarm 1
4.
2 : Alarm 2
5. SNOOZE/DIMMER: Backlight control/Snooze
6.
: VOL +/Next
7.
: VOL-/Previous
8. SET: Setup key
9. SLEEP: Power Timer
10.
Power key
11. LCD display
12. Speaker
13. Speaker
14. SD card slot
15. USB interface
16. Power interface
17. Audio input
18. FM antenna outlet
19. Battery case
【Tip: Remote controller has above 1,2,6,7, 10’s function】
Chapter V
Operation Instructions
▊Introductions of Key Functions
: Power Key
Power key of speaker is in default “OFF” status. To switch on the speaker, you can plug the USB power supply and then
press “ ”. To switch off, just press this key again.
Backlight will be on or off as the speaker is turned on or off. Note: It’s in AUX status by default as the speaker is turned
on, and LCD will have the relevant indication.
: Play/Pause/Auto Search/Next, LCD will have the relevant indication
1: Press this key to switch on or off alarm 1. If it’s switched on, icon
1key to enter the settings of alarm time:
and hold
press
will be shown. In on status, press
on LCD display will flash as well as the clock,
key to adjust the clock time and then press SET to exit or the system will exit
automatically.
2:
Same as operations of
【Tip: Alarm time is 1 minute. To turn off the alarm, press the alarm key.】
SNOOZE/DIMMER: Backlight control: Three levels are available, Bright/Dim/Off. You can press this key to choose.
SNOOZE: You can press SNOOZE/DIMMER to snooze if alarm rings and the alarm will ring again five
minutes later.
: Press and hold to increase the volume. LCD display will show relevant volume grade. Press this key to play the next
program if it’s playing music or to increase the number if it’s adjusting the clock.
: Press and hold to decrease the volume. LCD display will show relevant volume grade. Press this key to play the
previous program if it’s playing music or to decrease the number if it’s adjusting the clock.
SET: Time inquiry and calendar settings
Calendar settings: Press and hold SET key to enter the settings of calendar. Year digit will flash. You can press
key to adjust the number and press SET again and
key to adjust accordingly. Use the
same method to adjust the Date, Hour, and Minute, and press any key to exit or the system will exit
automatically.
Time Inquiry: In any status other than time display, users can press SET to check the time.
SLEEP: Power Timer: The time can be set as OFF, 15, 30, 45, 60, 75, 90, or 120 minutes. Default status is OFF status.
▊Music play
1. Function selection: Press “MODE”, and four working states are available, including SD Card, USB Disk, AUX, FM and
Bluetooth.
2. Insert SD card or USB disk contained with music: Press“
adjust the volume; press “
” to select the music; press and hold“
” key to
” key to pause or to play. In any state, SD card or USB disk is prior and can be plugged and
played instantly.
3. AUX state: Press and hold “
4. FM state: Press and hold “
key to adjust the volume.
” key to search channels automatically, press “
” to select channel and press “
” to
make fine adjustment.
Note : 3.5mm Stereo Audio Cable is required to be connected as an external antenna for FM operation purpose.
【Tip: It’s unable to pause in FM or AUX mode.】
5.Bluetooth state :Press MODE and select BLUE, after a voice of "ding-du-ding" come from the speaker, then it goes into the
Bluetooth state .Bluetooth is preferred to be automatic search the last Bluetooth products matching and automatic
connection; after 30 seconds didn't find the last one, the Bluetooth devices will open to the search speakers equipment
BT034 again to prompting the input password "0000" and matching, if success, a voice of "du-du" will come out and
Bluetooth devices will display connection succeeds also. This machine has a function to remember the last connection
device; first time to use, input password and connect, then it will work automatic if turn on afterwards.
【Tip: if the connection failure please shut down or restart, if battery power is not enough, please charge. 】
▊PC/Mobile phone Mode (External device mode)
1.
Connect the external device and speaker with provided 3.5mm audio cable to play the music. Press “MODE” and you
can then choose AUX external device music play mode.
▊Power supply
1.
BL-5C rechargeable battery is used.
【Tip: Remote controller operation instructions are almost the same as above】
Chapter VI
Notices
Do not place the product in bad environment, such as in damp places or places with dust or smoke.
Keep away from water or other liquid. If sprayed with water or liquid, dry it with the soft cloth.
Do not clean it with water or chemical agent. Clean the surface of speaker with soft cloth only.
Don’t place the products in direct sunlight or in overheat or overcooling places.
The voltage of power supply applied should not exceed 5V.
Do not break or press the speaker.
Keep the speaker away from strong magnetic field.
Do not disassemble the speaker.
Chapter VII
Troubleshooting
Failure
Not working, LCD does not light
SD card/USB disk
FM radio receives few/no radio channel
AUX no sound
Bluetooth
can’t
successfully after
connection
be
matched
several times’
Solutions
(1) Check whether the rechargeable battery is properly installed
(2) Check whether power line is correctly connected, or
(3) Whether the power supply is turned on or backlight is turned
off
(1) Check whether the device is in music play mode
(2) Check whether SD card/ USB disk is properly inserted
(3) Check whether there are MP3 format songs in SD card/ USB
disk
(1) Check whether the device is in FM radio mode
(2) Check whether the ambient environment is too closed or
remote
(3) Check whether it is operated following instructions on FM
radio operations
(4) Check if 3.5mm Audio cable is properly connected as
external antenna.
Check whether the provided 3.5mm audio cable and the external
device and speaker are properly connected.
(1)Check whether it is under searching status, otherwise shut
down or restart.
(2)Too much Bluetooth devices around caused search difficulties,
close other Bluetooth devices
(1)Check whether Bluetooth device volume ,adjust it to a suitable
Bluetooth volume is too small or
distortion
state
(2)Battery power is not enough, please recharge
Bluetooth music appear staccatos
Check whether out of transmitting range, or obstacle between
speaker and Bluetooth device
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:108f3fa3-0de8-40b7-96b5-241cc0c202ac
Producer                        : Ultra PDF
Modify Date                     : 2012:08:08 17:57:51+08:00
Create Date                     : 2012:07:26 18:44:33+08:00
Metadata Date                   : 2012:08:08 17:57:51+08:00
Creator Tool                    : EL70 for translation - revised June 25 12.docm - Microsoft Word
Document ID                     : uuid:20465efd-6689-4135-98b8-ae535303b92d
Format                          : application/pdf
Title                           : Microsoft Word - EL70 for translation - revised June 25 12.docm
Creator                         : wm05
Author                          : wm05

EXIF Metadata provided by EXIF.tools