Dongguan Taide BT065 Bluetooth speakers User Manual BT065 manua Taide201409

Dongguan Taide Industrial Co., Ltd. Bluetooth speakers BT065 manua Taide201409

Users Manual

User Manual
Bluetooth speakers
Brand name:IKANOO
Model name:BT065
FCC ID:OYCBT065
Dear user,
Thank you very much for choosing BT065 Bluetooth SPEAKER. Before use, please read this user manual carefully
in order to operate this device correctly and bring its excellent performance into full play.
. Notice
Please store and use this product at normal temperature;
DO NOT expose this product to rain or damp;
DO NOT toss this product and prevent it from falling and being damaged;
DO NOT disassemble, repair and modify this product;
As it is inbuilt with lithium battery, DO NOT cast or place it in fire to avoid danger.
. Overview
previous music / volume decrease
next music / volume increase
: play & pause / Volume/Order control
.Parameters
Model : BT065
Transmission distance: 10M (It varies when the environmental factors and the connected Bluetooth devices are
different)
USB charging voltage: DC 5V/500mah
Built-in battery: Lithium battery 280 mAh
Frequency response: 90Hz-20KHz
Sensitivity: 80db±2db
S/N ratio: 76dB
V. PACKING LIST
1. Speaker * 1
2. USB cable * 1
3. User manual * 1
VI. FUNCTION DESCRIPTION
BLUETOOTH OPERATION
1. Turn on the speaker. The indicator light will flash to detect Bluetooth enabled devices near you. The indicator
light will go out if no Bluetooth device is detected within 5 minutes.
2. Pair the speaker with the desired Bluetooth device.
3. Play/pause as desired by pressing
4. When you want to play music or movie from another Bluetooth device, disconnect the speaker and restart the
Bluetooth speaker and re-pair.
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 2.5-hour continuous
operation when fully charged.
Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The red indicator light will go
out when the speaker is fully charged.
VII. COMPATIBILITY
Device equipped with BLUETOOTH 3.0 or higher version (for details please refer to the relevant agreements,
general specification), such as the iPAD, iPHONE (the second generation and iPHONE with updated iPHONE 3.1
software), iPOD TOUCH, MAC with Bluetooth, and most of smart phone or computer support Bluetooth.
Bluetooth 3.0 including agreements asA2DP, AVRCP, HFP.
VIII. TROUBLESHOOTING
PROBLEM TROUBLESHOOTING
Failure in connection and
pairing for many times
1. Inspect whether the speaker is in the status of searching, or, restart
the machine.
2. The surrounding Bluetooth equipments are plentiful, which causes the
difficulty in searching. So, please close the other Bluetooth
equipments.
The sound is small or
distorted
1. Inspect the volume of the Bluetooth equipment and adjust the volume.
2. The power of battery is insufficient, please charge it.
PHENOMENON
Discontinuous music See whether the effective connection distance of sound is exceeded, or,
whether there is obstacle between the speaker and the Bluetooth
equipment.
The indicator for Bluetooth
mode is not on
1. It indicates that the power of the battery is not sufficient. Please try
again after charging it.
2. Restart the machine.
Hints: Another trouble, please consult the dealer or an experienced IT technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Navigation menu