Dongguan Taide BT075 Bluetooth Speaker User Manual BT075

Dongguan Taide Industrial Co., Ltd. Bluetooth Speaker BT075

Manual

INSTRUCTIONMANUAL
BT075
FCCID:OYCBT075
WARNINGS
Thisapplianceisintendedfordomestichouseholduseonlyandshouldnotbeusedforanyotherpurpose
orinanyotherapplication,suchasfornondomesticuseorinacommercialenvironment.
OVERVIEW
PlayorPause
Handsfreecallcontrolbutton
 Turnon/Turnoff
BLUETOOTHOPERATION
1. Turnonthespeaker.TheindicatorlightwillflashtodetectBluetoothenableddevicesnearyou.The
indicatorlightwillgooffifnoBluetoothdeviceisdetectedwithin5minutes.
2. PairthespeakerwiththedesiredBluetoothdevice.
3. Play/pauseasdesiredbypressing. Turnon/Turnoff
4. WhenyouwanttoplaymusicormoviefromanotherBluetoothdevice,disconnectthespeakerand
restarttheBluetoothspeakerandrepair.
Tip:Pressandhold for3secondstodisconnectquickly.
AUXPLAYBACKOPERATION
1. Turnonthespeaker.
MicroUSBChargingPort
Note:The USB Port not transfer data via PC
3.5mmAuxin
Play/Pause/HandsfreeCall/TURN
ON/TURNOFF
2. Insertan3.5mmaudiocableintotheauxjackonthebackofthespeaker,connectingtoanyaudio
devicesuchasmobilephonesorcomputerswiththeotherendofthecable.
3. Play/pauseasdesiredbypressing.
CHARGINGTHESPEAKER
ThespeakerhasabuiltinLithiumbattery.Thebatteryisrechargeableandprovidesapprox3hour
continuousoperationwhenfullycharged.
UsethemicroUSBcabletochargethespeaker.Theredindicatorlightwillilluminate.Theredindicator
lightwillgooffwhenthespeakerisfullycharged.
SPEAKERPHONEOPERATION
Press toansweranincomingcall.
Press tohangup.
Keeppessingtorejectanincomingcall.
Doublepresstoredialthelastphonenumber.
SPECIFICATION
ProductModelBT075
BluetoothSpecificationsBluetoothV4.0
TransmissionDistance10M(dependinguponoperationenvironmentanddevicestowhichitconnects)
USBRechargeVoltage:DC5V
BuiltinBattery:Lithiumbattery1050mAh
OutputPower:5W*2
FrequencyResponse:90Hz20KHz
Sensitivity:80db±2db
SignaltoNoiseRatio(SNR):80dB
ProductDimensions:65*65*120MM
Accessories
IB*1
MicroUSBchargingcable*1
3.5mmaudiocable*1
FCCStatement:
This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.

Navigation menu