Dongguan Xing Yue Electronic XO-9331 Spin-it Widget Bluetooth Speaker User Manual 7198 25
Dongguan Xing Yue Electronic co., Ltd Spin-it Widget Bluetooth Speaker 7198 25
user manual
Spin-it Widget
Bluetooth Speaker
Instruction Manual
XO-9331
1 x Spin-it Widget Bluetooth Speaker
1 x USB to Micro-USB charging cable
1 x Instruction Manual
Charging input: 5V/200mA
Built-in 55mAh/3.7V lithium ion battery
Battery capacity: 0.2035 Watt Hour
Playback time at max volume: up to 15 minutes
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may cause
undesired operation.
Warning:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
WARNING–When using this product, basic
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
Device main unit contains an internal
lithium-ion battery. Upon initial use or after a
prolonged storage period, fully charge it once.
The unit’s full performance is achieved only
after 2 or 3 completed charge and discharge
cycles.
To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
Do not expose the device to moisture.
Use of a power supply or charger not
recommended or sold by device manufacturer
may result in a risk of fire or injury to persons.
Do not use the device in excess of its output
rating. Overload outputs above rating may
result in a risk of fire or injury.
Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
Do not disassemble the device. Take it to a
qualified service person when service or repair
is required. Incorrect reassembly may result in
a risk of fire or injury.
Do not expose a device to fire or excessive
temperature. Exposure to fire or temperatures
above 212ºF may cause explosion.
Have services performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
Do not charge the device while using the
device to charge another device. Do not charge
the device for more than 4-6 hours and do not
leave unattended.
Switch off the device when not in use.
•
(1)
(2)
*
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
1.
2.
3.
•
•
•
•
Power ON/OFF
Bluetooth Speaker
Charging input port
What’s included:
Tech Specifications
FCC Statement:
SAFETY PRECAUTIONS:
MADE IN CHINA
Charging the speaker:
Using a regulated USB adapter. Connect a
USB cable to your USB adapter. Using the
Micro-USB connector, connect the other end
of the USB cable to the “DC 5V” port on the
speaker. Plug the USB adapter into the outlet
to begin charging.
Using your computer. Connect a USB cable
to a USB outlet on your computer. Using the
Micro-USB connector, connect the other end
of the USB cable to an “DC 5V” port on the
speaker. Make sure the computer is on to
begin charging the speaker.
It takes around 20 minutes to charge the
speaker from 0 to 100%.
Connecting the speaker with Bluetooth:
Switch the speaker “ON” using the ON/OFF
switch. The red, blue, and green LED’s will
light all around the Spin-it Widget. Using a
Bluetooth enabled device, search for “Spin-It
Widget” from the list of available pairs. Once
selected, the connection is successful. If the
switch is turned off, the bluetooth connection
will disconnect.
Using the speaker:
Once connected, use the mobile device to
control all audio functions.
Note: In order to charge the device use only
the provided USB charging cable or the
cable included with your own device by the
manufacturer.
1.
a.
b.
c.
2.
a.
3.
a.
*
Instructions:
1
3
2