Dongguan Xing Yue Electronic XO-9378-WG Bluetooth headphones User Manual BCTC 170401623E 2ALYRHG F02B NII report

Download:
Mirror Download [FCC.gov]
Document ID	3494499
Application ID	MAPx+WQWs8EXmi0GxTerqw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.66kB (70695 bits)
Date Submitted	2017-08-03 00:00:00
Date Available	2017-08-03 00:00:00
Creation Date	2017-07-27 21:09:07
Producing Software	pdfFactory Pro 3.52 (Windows 7 Ultimate x64 Chinese (Simplified))
Document Lastmod	0000-00-00 00:00:00
Document Title	BCTC-170401623E 2ALYRHG-F02B NII report.doc
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	YZD

XO-9378-WG User Manual
ONE、Product sketch map
⑥
③
①
②
④
①、Play / pause / switch machine key；
②、Last song / volume down key；
③、Next song / volume key；
④、Headset
⑤、Charging socket (USB socket)；
⑥、MIC port；
⑤
TWO、Button function definition
①
Play / pause / switch machine key；
Switch tone, English tone switch, music play / pause, answer / reject calls, hang up the phone
number, at the end of the redial
②
Last song / volume down key；
Last song / volume down
③
Next song / volume key；
Next volume, volume plus
THREE、Button function instructions
1、Switch mode and pairing mode entry
Press the switch button for 3 seconds, turn on the machine, enter the pairing
mode directly, the red and blue lights flash alternately. The Bluetooth search device
for Bluetooth devices such as mobile phones can be turned on. Click on the Bluetooth
device name to connect your cell phone to your Bluetooth headset. When Bluetooth
headset is on, press switch button and Bluetooth headset is switched off. Enter the
pairing mode, Bluetooth headset and mobile devices such as connection, success,
shutdown, etc., will be prompted with corresponding tips。
2、Bluetooth headset switch in English and Chinese
In pairing, double-click the switch key to toggle the tone in English and Chinese
3、The caller refused calls and hang up
Mobile phone equipment and headset connected successfully and in the connection
state, if there are calls, long refused to press the switch button, press the switch
button to answer the call, in the process of short press the switch button hang。
4、At the end of number redial
Mobile phone equipment with Bluetooth headset connection and in the connection
state, double-click the switch button at the end of May, the redial。
5、Play / pause music
When the Bluetooth headset and the mobile phone are in a connection state, press the switch
button to play the music, and press the switch button again to stop playing again。
6、Last song / volume down
When Bluetooth headset and mobile devices are connected and play music, press the last
song / volume key to reduce the volume, and press the last song / volume key to play a song。
7、Next volume/volume plus
When Bluetooth headset and mobile devices are connected and play music, press a / volume
key, press volume, press one song / volume key to play the next song
FOUR、Description of Bluetooth headset status
Press and press the switch button for 3 seconds, enter the pairing mode, the
red and blue lights are flashing, and after the connection is successful, the blue
light is slow to flash. When the red light flashes in the process, the battery is
too low. At this point, the power indicator is red and accompanied by a voice prompt
that the battery is too low. When the headset is charged, the red light is on and
the red light goes off when the charge is complete。
Bluetooth headset electrical performance parameters
state
parameter
working voltage
3.0V～4.2V
Pair state current
1.5mA～14.2mA
Standby current (connected
to Bluetooth)
0.46mA～8.53mA
Play music current
19.8mA～25.4mA
Call current
22.7mA～25mA
Charging current
100mA
ShutDown Current
1.5uA
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Title                           : BCTC-170401623E 2ALYRHG-F02B NII report.doc
Author                          : YZD
Creator                         : pdfFactory Pro www.fineprint.cn
Producer                        : pdfFactory Pro 3.52 (Windows 7 Ultimate x64 Chinese (Simplified))
Create Date                     : 2017:07:27 21:09:07+08:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools