Dongguan Xing Yue Electronic XO-9401 Clip Mini Bluetooth Speaker User Manual IM SM 2573 2

Dongguan Xing Yue Electronic co., Ltd Clip Mini Bluetooth Speaker IM SM 2573 2

Users Manual

Do not immerse in water or expose to moisture or damp weather conditions.Do not drop, knock, or shake. Rough handling can damage the internal precision component and its boards.Do not insert any objects into the speaker/mic.Keep away from children. Device is not a toy.Keep away from fire or other sources of heat. Exposure to high temperatures may cause it to explode.Do not short-circuit as this may cause damage to the unit.Do not pull the charging cable or over-extend it’s reach.Unauthorized changes or modifications may void your right to use this product.While using, always comply with any special regulations that may apply to the area you are in and always turn off your mobile device when its use is prohibited.5.6.7.8.9.10.11.12.13.Clip Mini Bluetooth® SpeakerInstruction ManualXO-94011 x Mini Speaker1 x USB to Micro-USB charging cable1 x Carrying Strap1 x Instruction ManualInput: DC 5V/500mAProduct Dimensions: 35*35 *35 mm Paring name : mini SPEAKERBluetooth version: 4.2output power: 5.5dBmFrequency response:2.4-2.48GBattery type: Li-PolymerBattery Capacity:200MAHUsing your computer. Connect a USB cable to a USB outlet on your computer. Using the Micro-USB connector, connect the other end of the USB cable to an charging port on the speaker. Make sure the computer is on to begin charging the speaker.Connecting a Media Device:Press and hold the Power Button for approx. 2 seconds to turn speaker ON/OFF.The Blue LED Indicator will flash to indicate pairing mode.Select “Mini Speaker” on your media device.Power Button Function:Audio volume and track selection can be made by using the media source device.Single, short press the power button to play/pause audio.When receiving an incoming call:Single, short press the power button to answer an incoming call. Single press again to hang up.Use the mic located on the speaker base during a call.Charging the speaker:Using a regulated USB adapter. Connect a USB cable to a USB adapter. Using the Micro-USB connector, connect the other end of the USB cable to the charging port on the speaker. Plug the USB adapter into the outlet to begin charging.WARNING–When using this product, basic precautions should always be followed, including the following:Read all the instructions before using the product.Charge the speaker completely before initial use to ensure longevity.If the device does not respond once it is powered on, the battery capacity may be low. Do not over charge the internal battery.b.2.a.b.c.3.ab.4.a.b.c.1.a•1.2.3.4.••••••••••••Power ButtonMicro-USB Charging PortLED IndicatorMic (speaker base)What’s included:Tech SpecificationsInstructions:Instructions (continued):SAFETY PRECAUTIONS:SAFETY PRECAUTIONS (continued):MADE IN CHINAThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, andThis device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.•(1)(2)*FCC Statement:FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . The device has been evaluated to meet general RF exposure requirement.

Navigation menu