Dongguan Xing Yue Electronic XO-9549 Wooden Wireless Charging Pad User Manual
Dongguan Xing Yue Electronic co., Ltd Wooden Wireless Charging Pad
User Manual
1.
a.
b.
c.
2.
a.
b.
c.
*
Made in China
INSTRUCTIONS:
Connect the provided Micro-USB cable to
the USB plug adapter.
Connect the Micro-USB tip to the input port
on the charging pad.
Insert corresponding charging cable into
the Charging Pad USB port.
Charging Mobile Devices:
Ensure that your phone or tablet supports
wireless charging. It will be listed in the
the last page of this manual).
Place the enabled device on the surface
of the wireless charging pad. The device
should display charging indicator.
When completely charged, remove the
device from the charging pad.
Note: To charge devices, use only the
accessory cable or the cable included with
your own device by the manufacturer.
Wooden Wireless
Charging Pad
Instruction Manual
XO-9549
1 x Wireless Charging Pad
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
Input power: 5V/1A
Output power: 5V/750A
While device is charging LED will illuminate
RED, Once the device is fully charged LED
will illuminate BLUE
1.
2.
3.
•
•
•
Micro-USB Input Port
LED Indicator
Charging Pad Surface
What’s included:
Function:
LED Indications
Do not use on an aircraft or in a hospital.
To reduce the risk of injury, close
supervision is necessary when the product
is used near children.
Do not expose the device to any moisture.
Do not use the device in excess of its
output rating. Overloaded outputs above
Do not use the device if damaged or
exhibit unpredictable behavior resulting in
Do not disassemble the device. Take it to
1.
2.
3.
4.
5.
6.
7.
8.
9.
***
or repair is required. Incorrect reassembly
excessive temperature. Exposure to
extreme heat may cause explosion.
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
This device is not a toy.
KEEP OUT OF REACH OF CHILDREN***
SAFETY PRECAUTIONS:
Read all the instructions before using the
product.
Galaxy S6 / S6 edge / S6 edge+ / Note 5/
S7 / S7 Edge / S8 / S8 Plus
Nokia Lumia 950 XL / 950 / 920 / 928 / 930
Google Nexus 6, Google Nexus 5, Google
Nexus 4
HTC 8X (Verzion Wireless), HTC Droid
DNA, HTC Rzound, HTC Droid Incredible
4G LTE;
LG D1L, LG Optimus LTE2;
Sharp AQUOS Slider SH-02D, Q-Pot SH-
04D; AQUOS SH-07D, AQUOS SH-13C;
iPhone 8/8 Plus,iPhone X10
Other wireless charging devices
•
•
•
•
•
•
•
•
•
•
Compatible Models:
165x89mm
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including
interference that may cause undesired
FCC ID: 2ALCFXO-9549
RF Exposure Warning Statements:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment shall be installed
and operated with minimum distance 20cm
between the radiator & body.