Dongguan Xing Yue Electronic XO-9566 Bright Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3887990
Application ID	MmHTsz8OXXA9zHkEXHMUwQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.98kB (312221 bits)
Date Submitted	2018-06-14 00:00:00
Date Available	2018-06-14 00:00:00
Creation Date	2018-06-13 09:18:32
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2018-06-13 09:18:32
Document Title	Users Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	微软用户

Bright Bluetooth Speaker
Instruction Manual
PowerButton
• Micro-USB ChargingPort
• LED Indicator
•
What’sincluded:
1 x MiniSpeaker
1 x USB to Micro-USB chargingcable
1 x CarryingStrap
1 x Instruction Manual
Tech Specifications
• Input: DC5V/400mA
• Paring name : Bright.
• Bluetooth version:4.2+EDR
• Battery type:Li-Polymer
• BatteryCapacity:400MAH
• FCC ID: 2ALCF-XO-9566
•
Instructions:
1. Charging thespeaker:
a .Using a regulated USB adapter.
Connect a USB cable to a USBadapter. Using theMicro-USB connector,
connect the other end of the USB cable to the charging port on the
speaker. Plug the USB adapter into the outlet to begin charging. The
LED will light up in redwhile in charging, turns off when fully charged.
b. Using your computer.
Connect a USB cable to a USB outlet on your computer. Using the
Micro-USB connector, connect the other end of the USB cable to an
charging port on the speaker. Make sure the computer is on to begin
charging the speaker.
Connecting a Media Device:
Press and hold the Power Button to turn speaker ON/OFF.
The Blue LED Indicator will flash to indicate pairing mode.
Select “ Bright.” on your media device.
Power Button Function:
Audio volume and track selection can be made by using the media source
device.
SAFETY PRECAUTIONS:
• WARNING–When using this product, basic precautions should always be
followed, including the following:
1. Read all the instructions before using the product.
2. Charge the speaker completely before initial use to ensure longevity.
3. If the device does not respond once it is powered on, the battery capacity
may be low.
4. Do not over charge the internal battery.
5. Do not immerse in water or expose to moisture or damp weather
conditions.
6. Do not drop, knock, or shake. Rough handling can damage the internal
precision component and its boards.
7. Do not insert any objects into the speaker/ mic.
8. Keep away from children. Device is not a toy.
9. Keep away from fire or other sources of heat.
Exposure to high temperatures may cause it to explode.
10. Do not short-circuit as this may cause damage to the unit.
11. Do not pull the charging cable or over-extend it’s reach.
12. Unauthorized changes or modifications may void your right to use this
product.
13. While using, always comply with any special regulations that may apply to
the area you are in and always turn off your mobile device when its use is
prohibited.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : 微软用户
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2018:06:13 09:18:32+08:00
Modify Date                     : 2018:06:13 09:18:32+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools