Dongguan xiangshang smart Technology SSA08 Mini Square Socket User Manual
Dongguan xiangshang smart Technology Co.,Ltd Mini Square Socket
User Manual
Link Smart Life account in Home Control . Find “Smart Life” in the list. In the new window, select your A en on: Due to Google Home APP's known bug, you could use only one Google account to control “Home Control Ac on”. If you sign in Google Home APP with several accounts, only the first account you signed in can be used for “Home Control”. Smart Life account region, type your Smart Life account and password, then tap “Link Now”. A er you assign rooms for devices, your devices will be listed in the Home Control page. . Tap “Home Control” in the hamburger menu on the Google Home App's Home Page, then tap “+”. 10 Quick Guide of Using Amazon Echo Set up Echo with Amazon Alexa APP Control your smart devices through Google Home Preparation . Amazon Alexa APP and account. . Smart Life APP and account. . An Echo device, including Echo, Echo Dot and Echo Tap. . Smart device. Now you can control your smart device through Google Home. Take bedroom light as the example, the supported voice commands are as below: Ok Google, turn on/off bedroom light. Ok Google, set bedroom light to 50 percent. Ok Google, brighten/dim bedroom light. Ok Google, set bedroom light to red. . Sign in with Amazon account. Tap Sign in with Smart Life account, add the device, then change the name to a easily recognized word or phrase, like “bedroom light”. 11 12 Enable our skill in Alexa APP . Tap the Homepage, select “Skills”, then search “Smart Life”. . Echo the Homepage on the top le , tap “Se ngs” and “Set up a new device”. Then follow the instruc ons. Select an Echo device, long press the dot bu on on the device un l the orange light shows up and tap “Con nue”. Then select your Wi-Fi network and connect it to your device according to the instruc ons. This may take several minutes. 13 Select “Smart Life” and tap “Enable Skill” to enable the Smart Life Skill. You will be redirected to the account link page. Type your Smart Life account and password, do not forget to select the country/region where your account belongs to. Then tap “Link Now” to link your Smart Life account. When “Alexa has been successfully linked with Smart Life” shows up, you can leave this page. (Note: If a Smart Life account has been linked before, you can use it directly, or you can also tap “Disable Skills” to remove it). 14 Control your smart device through Echo . You need to discover your smart device before the control. can say “Alexa, discover device” to Echo, or you can also tap “Discover Device” on APP to discover the smart devices. Discovered devices will be shown in the list. (Note: Every me you change the name of devices on Smart Life APP, Echo must rediscover devices before the control.) 15 16 Now you can control your smart devices through Echo. You can use following commands to control your devices (e.g.,bedroom light): Alexa, turn on/off bedroom light. Alexa, set bedroom light to 50 percent. Alexa, brighten/dim bedroom light. Alexa, set bedroom light to red. You can also set up groups in Alexa APP. Tap “Create group”, give your group a name like “my smart lights”, select devices to add them in this group, then tap “Save”. Now you can control your devices by group. If you say “Alexa turn on my smart lights”, all the lights will be turned on. 17 FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Format : application/pdf Creator : Ubuntu Title : 象尚小智说明书V1.3-20171113修改.cdr Create Date : 2018:02:02 11:26:13+08:00 Creator Tool : CorelDRAW X7 Modify Date : 2018:03:13 10:53:17+08:00 Metadata Date : 2018:03:13 10:53:17+08:00 Producer : Corel PDF Engine Version 17.0.0.491 Document ID : uuid:c19810b6-597c-456c-82cc-2edfd3787789 Instance ID : uuid:4797ebee-4c23-4a20-a311-00b26c96e5a3 Page Count : 3 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Author : UbuntuEXIF Metadata provided by EXIF.tools