Doodle Labs NM-DB-3N Wi-Fi Radio Transceiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3302620
Application ID	yMBju2dH2qgeYu04HfSOvg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.23kB (177936 bits)
Date Submitted	2017-03-02 00:00:00
Date Available	2017-03-02 00:00:00
Creation Date	2016-11-29 14:52:32
Producing Software	LibreOffice 5.1
Document Lastmod	2017-03-02 10:13:38
Document Title	User Manual
Document Creator	Writer
Document Author:	Doodle

User Manual
NM-DB-3
Rugged/Military grade 2.4/5 GHz 3x3 MIMO Wi-Fi® Radio Transceivers
Features





Qualcomm-Atheros AR9590-AR1B Chipset with Extended Temperature Range
Up to 450 Mbps Throughput with 3x3 MIMO Technology
Calibrated High Power 2.4 GHz (29 dBm) and 5 GHz operation (27 dBm) for Extended Range
Supported Ath9k Linux Driver
MiniPCIE Interface
TECHNICAL SPECIFICATIONS
Model No.
NM-DB-3
Qualcomm Atheros
MAC Chipset
QCA9590-AR1B with Extended Temperature range for Outdoor and
Rugged models)
Linux Drivers
Software Support
ath9k
5.180 GHz -5.240 Ghz & 5.745 GHz -5.825 Ghz
Center Frequency Range
2.412 GHz ~ 2.484 GHz
This varies by the regulatory domain
Channel Bandwidth*
20, 40 MHz channels
Radio Modulation (Dynamic BPSK, QPSK, 16 QAM, and 64 QAM (5.x GHz)
Link Adaptation)
CCK, BPSK, QPSK, 16 QAM, and 64 QAM (2.4 GHz)
802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps (5.x GHz)
Data Rates Supported
802.11n: MCS0-23 (5.x and 2.4 GHz)
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps (2.4 GHz)


802.11n and b/g Beam Forming
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), Maximal
ratio combining (MRC), Cyclic shift diversity (CSD), Frame
802.11n version 2.0
aggregation, block ACK, 802.11e compatible bursting, Spatial
Capabilities
multiplexing, cyclic-delay diversity (CDD), low-density parity check
(LDPC), Space Time Block Code (STBC)
 Phy data rates up to 450 Mbps (40 MHz channel)
AP, STA and Adhoc modes to implement Point to Point, Point to multi
Operating Modes
Point
TDD with Carrier Sense Multiple Access with Collision Avoidance
MAC Protocol
(CSMA/CA)
Wireless Error Correction
FEC, ARQ
128 bit AES, WEP, TKIP and WAPI hardware encryption. Support for
Wireless Data Security
IEEE 802.11d, e, h, i, k, r, v, w and time stamp standards
Loop back mode to facilitate FIPS AES certification, Small packet size
FIPS Certification
(96 bytes) in AES encryption at full packet rate
Tx/Rx
Radio
Rx Sensitivity
Coding Rate
Max Tx Power
Specification Modulation
(Typ)
5 GHz (20 MHz Channel)
802.11a, STBC
BPSK
1/2
25.18
-96
802.11a, STBC 64 QAM
3/4
25.09
-81
MIMO
BPSK
1/2
25.09
-93
MIMO 16 QAM
3/4
25.09
-83
MIMO 64 QAM
5/6
25.09
-72
5 GHz (40 MHz Channel)
MIMO
BPSK
1/2
22.93
-90
MIMO 16 QAM
3/4
22.93
-79
MIMO 64 QAM
5/6
22.93
-69
2.4 GHz (20 MHz Channel)
802.11b, STBC 1 Mbps
802.11g, STBC 64 QAM
802.11n, MIMO
BPSK
802.11n, MIMO 16 QAM
CCK
3/4
1/2
3/4
27.32
27.16
26.84
26.84
-100
-80
-92
-82
802.11n, MIMO 64 QAM
5/6
26.84
-72
2.4 GHz (40 MHz Channel)
802.11n, MIMO
BPSK
1/2
26.94
-90
802.11n, MIMO 16 QAM
3/4
26.94
-79
802.11n, MIMO 64 QAM
5/6
26.94
-70
Note 1 It is advantageous to use the smallest Channel Bandwidth that can support the Throughput
requirements. Smaller bandwidths provide more channels to choose and help avoid interference
issues. The system’s SNR is higher at smaller Channel Bandwidths and Range is longer.
Note 2 Max allowed Tx power depends on the regulatory domain
Antenna Signal Strength
-35 to -85 dBm (Recommended), Absolute Maximum=+12 dBm
Up to +10 dBm signal strength for 5 GHz signal without degrading 2.4
Antenna port isolation for
GHz operation
concurrent operation
Up to +5 dBm signal strength for 2.4 GHz signal without degrading 5.x
GHz operation
Integrated Antenna Port
>20 KV (Human Body Model)
Protection
Receiver LNA Gain
>10 dB
Receiver Adjacent Channel
>18 dB @ 11a, 6 Mbps (Typ)
Rejection (ACR)
Receiver Alternate Channel
>35 dB @ 11a, 6 Mbps (Typ)
Rejection (ALCR)
Receive chain Noise Figure +6 dB
Transmitter Adjacent Channel
45 dB (Fc ± ChBW)
Leakage power Ratio (ACLR)
Transmitter Spurious
-40 dBc
Emission Suppression
In 0.5 dBm steps. Accuracy of power calibration loop ±2 dBm. Each
RF Power control
transceiver individually calibrated and tested.
RF Hardware Disable (RF
Pin 20 of miniPCI-E interface. (Required for FAA compliance)
Kill)
Control for External Power
Available as an optional configuration
Amp
Spectral Analysis
8 bit resolution spectral FFTs available for software analysis
PHYSICAL, ENVIRONMENTAL AND OTHER SPECIFICATIONS
Antenna Ports
3 Ports (50 Ohms) with MMCX connectors.
Host Interface
miniPCI-Express 1.2 Standard
Any CPU board with Industry standard miniPCI-Express interface with
Host CPU Board
minimum 6 mm connector height
Operating Voltage
3.3 Volts from miniPCI-Express connector
5.3W @ Max power, in continuous data transfer mode on all chains
3.75W @ 25 dBm power, in continuous data transfer mode on all
chains
Power Consumption
2.5W @ 20 dBm power (ETSI max), in continuous data transfer mode
on all chains
0.9W in continuous data receive mode
250 mW in Sleep mode
-40°C to +80°C
Shield case temperature
The System’s thermal design should ensure that the transceiver’s case
range (Operating)
temperature is maintained within these specifications.
Humidity (Operating)
0% – 95% (Non-condensing)
Dimensions
30 x 50 x 7 mm, 14 grams
Regulatory Requirements
FCC ID
CE/ETSI
Industry Canada (IC)
RoHS/WEEE Compliance
Mechanical drawing and 3D-CAD files available upon request
Designed and Verified to meet various regulatory requirements. Formal
testing and approval is required based on the Integrator’s particular
host platform and antenna type. The Integrator is also responsible for
obtaining all required regulatory approvals in target markets for the
finished product.
2AG87NM-DB-3N
Q3 2016
Q3 2016
Yes. 100% Recyclable/Biodegradable packaging
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
Radiation Exposure Statement:
The modular can be installed or integrated in mobile or fix devices only.
This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are
firmware programmed at the factory to match the intended destination.
The firmware setting is not accessible by the end user.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures.
If the FCC identification number is not visible when the module is installed inside another device, then the outside
of the device into which the module is installed must also display a label referring to the enclosed module.
This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID:2AG87NM-DB-3N
Or Contains FCC ID:2AG87NM-DB-3N” when the module is installed inside another device, the user manual
of this device must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
The devices must be installed and used in strict accordance with the manufacturer's instructions as
described in the user documentation that comes with the product.
The antenna type used is the reverse screw R-SMA antenna and the max antenna gain is 3dBi.
The diagram shows how to connect the modular with its intended antenna .
Modular
Coaxial Line
(50Ω )
Singapore:
Doodle Labs (SG) Pte. Ltd.
150 Kampong Ampat
KA Center, Suite 05-03
Singapore 368324
Tel: +65 6253 0100
Antenna
USA:
Doodle Labs LLC
2 Mattawang Drive
Somerset, NJ 08873
Tel: +1 862 345 6781
Fax: +65 6353 5564

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2016:11:29 14:52:32+08:00
Creator Tool                    : Writer
Modify Date                     : 2017:03:02 10:13:38+08:00
Metadata Date                   : 2017:03:02 10:13:38+08:00
Format                          : application/pdf
Creator                         : Doodle
Producer                        : LibreOffice 5.1
Document ID                     : uuid:a7f72f75-2ecb-486d-89e8-731108085a89
Instance ID                     : uuid:47474b82-2a5b-47d9-89b0-f35554435d92
Page Count                      : 5
Language                        : en-SG
Author                          : Doodle

EXIF Metadata provided by EXIF.tools