Dorel Juvenile Group 08038TR Home Connection Monitor System User Manual 08038 inst E 112103

Download:
Mirror Download [FCC.gov]
Document ID	400116
Application ID	O71BP6ZCH2hTM1PVM8QH3Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.8kB (497558 bits)
Date Submitted	2004-03-01 00:00:00
Date Available	2004-03-01 00:00:00
Creation Date	2003-12-10 14:02:08
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2004-01-21 14:10:42
Document Title	08038_inst_E_112103
Document Creator	QuarkXPressª: LaserWriter 8 8.5.1
Document Author:	JTower

08038_inst_E_112103 12/10/03 2:00 PM Page 1
Home Connection
Monitor System
08038
User Guide
Questions? Comments?
Missing Parts? Contact Us:
www.safety1st.com
(800) 544-1108
©2003 Dorel Juvenile Group
Made in CHINA
www.safety1st.com
(800) 544-1108
Styles and colors may vary.
Distributed by Dorel Juvenile Group, Inc.,
2525 State Street,
Columbus, IN 47201-7494
In Canada: 12345 Albert-Hudon, Suite 100,
Montreal-N, QC Canada H1G 3K9
12/03
08038_inst_E_112103 12/10/03 2:00 PM Page 2
WARNING
PLEASE READ THE FOLLOWING WARNINGS AND ALL ASSEMBLY
INSTRUCTIONS CAREFULLY BEFORE USING THE SO CLOSE CRIB
MONITOR. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
TERMS USED IN WARNINGS: The term “Receiver” corresponds to “Parent’s
Unit” and the term “Transmitter” corresponds to “Baby’s Unit” in the rest of this
instruction booklet.
• The Home Connection Monitor System is not intended to replace
responsible and proper parental supervision.
• Check your child’s activity at regular intervals as this monitor will not alert
parents to the silent activities of a child.
• Before using your Home Connection Monitor System:
- Read and follow all instructions carefully.
- Read and observe all warnings on the product and in this
instruction booklet.
• To prevent entanglement with the adapter cord, NEVER place the
cord in or near a crib or playpen. DO NOT place the Transmitter or
Receiver anywhere its AC adapter cord could be within reach of children.
• ALWAYS KEEP THE TRANSMITTER, RECEIVER AND AC ADAPTERS
OUT OF REACH OF CHILDREN.
• This product is not intended to be used as a medical monitor and its
use should not replace adult supervision.
• It is essential to check reception regularly. Please see the Testing
Reception section for complete instructions.
• The Transmitter is intended for indoor use only.
• NEVER use the Transmitter or Receiver near water. For example, do not
use near a bathtub, bathroom sink, laundry tub, kitchen sink, in a wet
basement, etc.
• Always unplug the AC adapters from wall outlets during long periods
of non-use.
• Position the Transmitter, Receiver and AC adapters to allow adequate
ventilation and prevent these components from overheating.
• To prevent overheating, keep the Transmitter, Receiver and AC adapters
away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) which produce heat. Also keep these
components out of direct sunlight.
• Use only the AC adapters provided. Use of any other adapters may
damage the Transmitter and/or Receiver. Plug the AC adapters into
standard household current only (120V AC outlet)! To prevent
entanglement and overheating, DO NOT use extension cords.
• The AC adapters may become slightly warm to the touch during operation.
This is normal.
• Position the AC adapter cords so that they are not walked on or pinched by
items placed upon or against them, paying particular attention to cords at
AC adapter plugs, wall plugs, and the point at which the cords attach to the
Transmitter and Receiver.
08038_inst_E_112103 12/10/03 2:00 PM Page 3
• This product should be serviced only by qualified service personnel at Dorel
Juvenile Group when:
- An AC adapter or its plug is damaged,
- The Transmitter or Receiver are dropped,
- Liquid has spilled into the Transmitter or Receiver or
- The Transmitter or Receiver do not appear to operate normally or exhibit a
marked change in performance
• DO NOT attempt to service this product beyond that described in the
Troubleshooting section at the end of these instructions. All other servicing
should be referred to qualified personnel at Dorel Juvenile Group.
NOTE: The LEDs emit IR (infra red) light that is not harmful.
CAUTION
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER OR
BACK OF TRANSMITTER. NO SERVICEABLE PARTS INSIDE. REFER SERVICING TO
DOREL JUVENILE GROUP CONSUMER RELATIONS (800) 544-1108.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS
PRODUCT TO WATER OR MOISTURE. NEVER ATTEMPT TO OPEN THE CASE OF THE
TRANSMITTER. THIS IS DANGEROUS AND WILL VOID THE WARRANTY.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes and Modifications not expressly approved by the manufacturer or registrant of
this equipment can void your authority to operate this equipment under Federal
Communications Commissions rules.
WARNING: Changes or modifications to this unit not expressly approved by
Dorel Juvenile Group could void the user’s authority to use the equipment.
08038_inst_E_112103 12/10/03 2:01 PM Page 4
Features and Components
Parent’s Unit (2)
Baby’s Units (3)
Microphone
Secure Sound Lights
Talk Button
Channel Selector
Room Selector Buttons
Scan Button
On/Off & Volume Control
H Speaker
I Power On & Low Battery Indicator
J On/Off Switch
K Power On Indicator
L Microphone
M Channel Selector
N AC Adapter (5)
O Attachable Cord Shortener (3)
P Rechargeable Batteries (2)
Keep These Instructions for Future Use
• Lay out and identify all parts.
• Do not return this product to the place of purchase. If any parts are missing, or if you
are having difficulty using product visit our web site at www.safety1st.com. Or call
Consumer Relations at (800) 544-1108. Have the model number (08038) and date
code (manufacturing date) ready before you call. The date code is located on the
bottom of each Parent’s Unit.
• The Recharging Battery is designed for many years of use, but if you should need to
replace it, the part number is ######.
08038_inst_E_112103 12/10/03 2:01 PM Page 5
Installing Your Home Connection Monitor System
WARNING
• To prevent entanglement, only mount the Baby’s Unit in a location where it
and its AC adapter cord are OUT OF REACH OF CHILDREN.
• DO NOT mount the Baby’s Unit directly above heating vents, other heat
producing sources or in direct sunlight.
• To prevent entanglement and overheating, NEVER use an extension cord.
To Charge the Parent’s Units:
IMPORTANT: You will need to fully
charge each Parent’s Unit BEFORE
FIRST USE and when low battery
indicator is illuminated.
1. Unscrew the two screws at the bottom
of each Parent’s Unit. Insert the
Recharging Battery with 2 pin
connector wire facing down. Connect
the two pin connector inside each
Parent’s Unit. Replace the bottom and
secure screws (Figure 1).
2. Connect an AC adapter into each
Parent’s Unit and into a power outlet
(Figure 1). It takes approximately 8
hours to fully charge.
CAUTION
• When using batteries, check batteries
regularly. Amber LED indicates the
batteries are low. DO NOT rely on
Parent’s Unit when batteries are low.
Recharging
Battery
2 Pin
Connector
Screws
NOTE: The Parent’s Units may use either the AC adapter or the rechargeable batteries
provided.
3. For AC Power Use: Locate each Parent’s Unit and its AC adapter. Connect the
AC adapter into the side of the Parent’s Unit. Connect the AC adapter into a power
outlet.
CAUTION: DO NOT use an adapter or batteries that did not come with this
product.
For Battery Use: Charge the Parent’s Units as noted above.
NOTE: If desired, slide the belt clip over your belt.
08038_inst_E_112103 12/10/03 2:01 PM Page 6
Installing Your Home Connection Monitor System
To Set Up the Baby’s Units:
4. Locate each Baby’s Unit and its AC
adapter. Connect the AC adapter
into the bottom of each Baby’s
Unit (Figure 2). If desired, wrap the
excess cord onto cord shortener.
Connect the AC adapter into a
power outlet. Place the Baby’s Unit
on a flat surface 4 to 6’ (1.5 to 2 m)
away from the baby.
Baby’s Unit
AC
Adapter
CAUTION: DO NOT use an adapter
that did not come with this product.
Choose Locations:
IMPORTANT: When choosing locations to set up the Baby’s Units and Parent’s Units
follow these guidelines:
• For best sound quality and safety, place each Baby’s Unit 4 to 6’ (1.5 to 2 m) away
from the baby.
• Be certain the Parent’s Unit and Baby’s Unit are set on the same channel (all Units
are preset on channel I when packaged).
• Check reception regularly.
• Adjust the volume to a comfortable level for your environment.
• Use each Parent’s Unit far enough away from the Baby’s Units so as not to get
feedback.
• During use of the monitor, if the sound quality deteriorates you may be reaching the
limits of the monitor’s range. If this happens, you will need to move the Parent’s Units
in closer proximity to the Baby’s Units.
To Use the Baby’s Unit and Parent’s Units:
5. Turn each charged Parent’s Unit and Baby’s Units to the On position. Be sure that
channel I is selected on all Baby’s Units.
NOTE: The channel selectors on the Parent’s Units are preset to channel I. A
second channel is available if you experience interference. Please refer to the
Troubleshooting section.
08038_inst_E_112103 12/10/03 2:01 PM Page 7
Operating Your Home Connection Monitor System
To Use the Baby’s Unit and Parent’s Units (continued):
6. Adjust the volume by turning the
knob on the side of each Parent’s
Unit. Check the battery LED on
the Parent’s Units to be sure the
unit is charged (green). If the Low
Battery LED is illuminated amber,
you need to recharge the Parent’s
Unit (Figure 4).
On/Off
Volume
Control
Low
Battery
LED
(Amber)
7. To listen to a Baby’s Unit press the
room selector button that
corresponds to the Baby’s Unit that
you want to monitor. Each Baby’s
Unit is color coded to match the
corresponding button on the
Parent’s Units.
Scan Feature:
8. The Parent’s Units can scan each
Baby’s Unit for three second
intervals. For example, Baby’s Unit A
is monitored for three seconds and
the corresponding colored LED
illuminates. Next, Baby’s Unit B is
monitored and so on. Press the Scan
button to turn Scan On. To turn
Scan Off and listen only to one
Baby’s Unit, press the room selector
button that corresponds to the
Baby’s Unit (Figure 5).
Baby’s
Unit A
Baby’s
Unit B
Baby’s
Unit C
Scan
Button
Talk
Button
Two-way Talk Feature:
9. The two-way talk feature on each
Parent’s Unit allows the parent to
communicate with someone on the
second Parent’s Unit. Press and hold
the talk button. Release button to listen (Figure 5).
Secure Sound Lights:
10. The 5 sound lights on the Parent’s Units indicate the sound level of the room
that you are monitoring. The more noise in the selected room, the more
sound lights will illuminate.
CAUTION: Test the Parent’s Unit before each use. It is essential to check reception
regularly.
IMPORTANT: The first time you use your Home Connection Monitor System, go
through the section “To Test the Reception” with two adults.
08038_inst_E_112103 12/10/03 2:01 PM Page 8
Operating Your Home Connection Monitor System
To Test the Reception:
11. Place each Baby’s Unit in a room near the baby. Have an adult speak into
each Baby’s Unit at various levels (soft to loud) while another adult checks
each Parent’s Unit for the proper sound and reception. Try the Parent’s Unit
in every location that it will be used. Try talking from one Parent’s Unit to the
other. It is best to follow these guidelines for good reception:
Guidelines for good reception:
• The Baby’s Unit should be placed 4 to 6’ (1.5 to 2 m) away from the baby.
• Be certain each Parent’s Units and corresponding Baby’s Unit are set on the same
channel (see Troubleshooting).
• Check reception regularly by following Step 10 above.
• Adjust the volume to a comfortable level for your environment.
• Use each Parent’s Unit far enough away from the Baby’s Units so as not to get
feedback.
• During use of the monitor, if the sound quality deteriorates you may be reaching the
limits of the monitor’s range. If this happens, you will need to move the Parent’s Unit
in closer proximity to the Baby’s Unit.
NOTE: It is possible for the Parent’s Units to pick up sounds or interference from
other signal producing devices including other audio or video monitors which
broadcast in the 900 MHz range. To minimize this potential problem, two
independent channels have been provided.
If interference becomes a problem on the preset channel, please refer to the
Troubleshooting section at the end of these instructions.
CAUTION: To protect your privacy, always turn the Baby’s Units off when not in
use. Always remember that you are using public airwaves. Sound may be broadcast
to other receiving devices. Conversations, even from rooms near by, may be broadcast.
Troubleshooting
NOTE: Do not return this product to the place of purchase. If you are having difficulty
using product visit our web site at www.safety1st.com or contact Consumer
Relations at (800) 544-1108.
Problem
Static or no sound on preset
channel
Possible Cause
Channel switches are not on the
same setting (I or II)
Signal interference due to
monitors, cellular or cordless
telephones, etc.
Out of range
Solution
Check the channel switches on
the Baby’s Unit and Parent’s Unit
to confirm they are on the same
channel (I or II)
Try the other channel
Turn the Baby’s Unit and Parent’s
Unit off, wait a moment then
turn them back on
Bring Parent’s Unit unit closer to
Baby’s Unit
08038_inst_E_112103 12/10/03 2:01 PM Page 9
Troubleshooting (continued)
Problem
Parent’s Unit’s power indicator
does not illuminate
Possible Cause
Parent’s Unit is not turned on
Batteries are dead/
Power is turned off
Solution
Slide the button on each side of
Parent’s Unit to the on position
Make certain that any light switches
that control the power flow to the
wall outlet are on (when using AC)
Make certain that house fuses
and circuit breakers are on (when
using AC)
AC Adapter not properly
connected
Audio feedback (squealing)
Check AC Adapter jack-to-socket
and plug-to-outlet connections
Baby’s Unit is too close to the
Parent’s Unit
Move the Baby’s Unit further
away from the Parent’s Unit
Lower the volume on the
Parent’s Unit
Parent’s Unit not functioning or
static or power LED is amber
Batteries are low
If amber LED lights or no LED
at all, change the batteries
If you are not using batteries, be
certain that you are using the
correct AC adapter
Move closer to the Baby’s Unit
Wrong AC adapter used
Not within range
Baby’s Unit is not turned on
Slide the button on side of each
Baby’s Unit to the on position
Not within range
Bring Parent’s Unit unit closer to
Baby’s Unit
Recharging Battery for Parent’s
Unit does not recharge
Exceed Recharging Battery’s life
span
Replace Recharging Battery (see
page 5)
Parent’s Unit has no sound
Volume not turned up
Adjust the volume control on
the Parent’s Unit
Baby’s Unit not functioning or
power LED is off
NOTE: To change the preset
channels, slide open the door on
the bottom of both Parent’s Unit
and flip the switches for each
corresponding Baby’s Unit to the
desired position. Be sure to change
the switch on the side of Baby’s
Units to the matching channel.
Channel Selector Switch
08038_inst_E_112103 12/10/03 2:01 PM Page 10
One-Year Limited Warranty
Dorel Juvenile Group, Inc. warrants to the original purchaser that this product
(Home Connection Monitor System), is free from material and workmanship
defects when used under normal conditions for a period of one (1) year from the
date of purchase. Should the product contain defects in material or workmanship
Dorel Juvenile Group, Inc., will repair or replace the product, at our option, free of
charge. Purchaser will be responsible for all costs associated with packaging and
shipping the product to Dorel Juvenile Group Consumer Relations Department at
the address noted on the front page of this document and all other freight or
insurance costs associated with the return. Dorel Juvenile Group will bear the cost
of shipping the repaired or replaced product to the purchaser. Product should be
returned in its original package accompanied by a proof of purchase, either a sales
receipt or other proof that the product is within the warranty period. This warranty
is void if the owner repairs or modifies the product or the product has been
damaged as a result of misuse.
This warranty excludes any liability other than that expressly stated previously,
including but not limited to, any incidental or inconsequential damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:12:10 14:02:08Z
Modify Date                     : 2004:01:21 14:10:42+08:00
Page Count                      : 10
Creation Date                   : 2003:12:10 14:02:08Z
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : JTower
Mod Date                        : 2004:01:21 14:10:42+08:00
Metadata Date                   : 2004:01:21 14:10:42+08:00
Creator                         : JTower
Title                           : 08038_inst_E_112103

EXIF Metadata provided by EXIF.tools