Dorel Juvenile Group 08041R Transmitter Unit of Baby Monitor User Manual 08041 Quick Connection

Dorel Juvenile Group Transmitter Unit of Baby Monitor 08041 Quick Connection

User Manual

34User GuideQuestions? Comments? Missing Parts? Contact Us:www.safety1st.com(800) 544-1108©2003 Dorel Juvenile Group Made in CHINAwww.safety1st.com (800) 544-1108 Styles and colors may vary. Distributed by Dorel Juvenile Group, Inc.,2525 State Street, Columbus, IN 47201-7494 In Canada: 12345 Albert-Hudon, Suite100, Montreal-N, QC Canada H1G 3K9 10/03Quick Connection Two Way Monitor System0804108041 Quick Connection 10/9/03 11:25 AM Page 1
PLEASE READ THE FOLLOWING WARNINGS AND ALL ASSEMBLYINSTRUCTIONS CAREFULLY BEFORE USING THE QUICKCONNECTION TWO WAY MONITOR. KEEP THESE INSTRUCTIONS FORFUTURE REFERENCE.TERMS USED IN WARNINGS: The term “Receiver” corresponds to “ParentUnit” and the term “Transmitter” corresponds to “Child Unit” in the rest of thisinstruction booklet.• The Quick Connection Two Way Monitor is not intended to replaceresponsible and proper parental supervision.• Check your child’s activity at regular intervals as this monitor will not alert parents to the silent activities of a child.• Before using your Quick Connection Two Way Monitor:- Read and follow all instructions carefully.- Read and observe all warnings on the product and in thisinstruction booklet.• To prevent entanglement with the adapter cord, NEVER place the cord in or near a crib or playpen. DO NOT place the Receiver anywhere itsAC adapter cord are within reach of children.• ALWAYS KEEP THE TRANSMITTER, RECEIVER AND AC ADAPTERSOUT OF REACH OF CHILDREN.• This product is not intended to be used as a medical monitor and its use should not replace adult supervision. It is important that an adult stay within the viewing range of the Quick Connection Two Way Monitor atall times during use.• It is essential to check reception regularly. Please see the TestingReception section for complete instructions.• The Receiver is intended for indoor use only.• NEVER use the Transmitter or Receiver near water. For example, do notuse near a bathtub, bathroom sink, laundry tub, kitchen sink, in a wetbasement, etc.• Always unplug the AC adapters from wall outlets during long periods of non-use.• Position the Transmitter, Receiver and AC adapters to allow adequateventilation and prevent these components from overheating.• To prevent overheating, keep the Transmitter, Receiver and AC adaptersaway from heat sources such as radiators, heat registers, stoves or otherappliances (including amplifiers) which produce heat. Also keep thesecomponents out of direct sunlight.• Use only the AC adapters provided. Use of any other adapters may damage the Transmitter and/or Receiver. Plug the AC adapters intostandard household current only (120V AC outlet)! To prevententanglement and overheating, DO NOT use extension cords.• The AC adapters may become slightly warm to the touch during operation.This is normal.• Position the AC adapter cords so that they are not walked on or pinched byitems placed upon or against them, paying particular attention to cords atAC adapter plugs, wall plugs, and the point at which the cords attach to theTransmitter and Receiver.WARNING208041 Quick Connection 10/9/03 11:25 AM Page 2
3• This product should be serviced only by qualified service personnel atDorel Juvenile Group when:-An AC adapter or its plug is damaged, -The Transmitter or Receiver have fallen,-Liquid has spilled into the Transmitter or Receiver or-The Transmitter or Receiver do not appear to operate normally or exhibit amarked change in performance• DO NOT attempt to service this product beyond that described in the Troubleshooting section at the end of these instructions. All other servicingshould be referred to qualified personnel at Dorel Juvenile Group.NOTE: The LEDs emit IR (infra red) light that is not harmful.TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER ORBACK OF TRANSMITTER. NO SERVICEABLE PARTS INSIDE. REFER SERVICING TODOREL JUVENILE GROUP CONSUMER RELATIONS (800) 544-1108.TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THISPRODUCT TO WATER OR MOISTURE. NEVER ATTEMPT TO OPEN THE CASE OF THEPRODUCT. THIS IS DANGEROUS AND WILL VOID THE WARRANTY.FCC Compliance InformationNOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:• Re-orient or relocate the receiving antenna,• Increase the separation between the equipment and receiver,• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.WARNING: Changes or modifications to this unit not expressly approved byDorel Juvenile Group could void the user’s authority to use the equipment.CAUTIONWARNING08041 Quick Connection 10/9/03 11:25 AM Page 3
4Parent UnitChild Unit AC Adapter (2)34ABBCAParts List• Lay out and identify all parts.• Do not return this product to the place of purchase. If any parts are missing, or if youare having difficulty using product visit our web site at www.safety1st.com. Or callConsumer Relations at (800) 544-1108. Have the model number (08041) and datecode (manufacturing date) ready before you call. The date code is located on thebottom of the Child Unit.Keep These Instructions for Future UseC08041 Quick Connection 10/9/03 11:25 AM Page 4
5Installing Your Quick Connection Two Way Monitor• To prevent entanglement, only mount the Child Unit in a location where itand its AC adapter cord are OUT OF REACH OF CHILDREN.• DO NOT mount the Child Unit directly above heating vents, other heatproducing sources or in direct sunlight.• To prevent entanglement and overheating, NEVER use an extension cord.WARNING2To Set Up Your Child Unit:11.Locate the Child Unit and its ACadapter. Connect the AC adapterinto the back of the Child Unit. CAUTION: DO NOT use an adapterthat did not come with this product.Child UnitAC AdapterDoor 2aCordExit342.Wrap the excess cord onto built incord shortener (Figure 2). Allowenough cord to reach the outletand connect the AC adapter into apower outlet. Allow the cord to exitthe hole and close the door.08041 Quick Connection 10/9/03 11:25 AM Page 5
6Installing Your Quick Connection Two Way Monitor1a3 AAABatteriesTo Set Up Your Parent Unit:1NOTE:The Parent Unit may use eitherthe AC adapter or batteries. Whenplugged in, the AC adapter will be thesource of power.1.For AC Power Use: Locate theParent Unit and its AC adapter.Connect the AC adapter into the sideof the Parent Unit. Connect the ACadapter into a power outlet (Figure1).CAUTION: DO NOT use an adapterthat did not come with this product.For Battery Use: Locate the centerscrew at the back of the ParentUnit. Unscrew the screw. Pull offthe battery door and insert threeAAA batteries (see positive andnegative diagram on the ParentUnit). Secure the door with thescrew (Figure 1a). NOTE: If desired, slide the belt clipover your belt.Parent UnitAC AdapterBattery Door Screw• When using batteries, check batteries regularly. Amber LED indicates thebatteries are low. DO NOT rely on Parent Unit when batteries are low.CAUTIONChoose a Location:34• For best sound quality place the ChildUnit 4 to 6' (1.5 to 2 m) away fromthe child.• Use the Parent Unit far enoughaway from the Child Unit so as notto get feedback.• DO NOT usethe Parent Unit morethan 1000' (304.8 m) away fromthe Child Unit.Parent Unit Child Unitup to 1000'IMPORTANT: When choosing a location to set up your Child Unit and Parent Unitfollow these guidelines:08041 Quick Connection 10/9/03 11:25 AM Page 6
7Operating Your Quick Connection Two Way Monitor341342On/OffVolumeControl1.Turn the Parent Unit and the ChildUnit to the On position. Choose achannel. Be sure that the samechannel is selected on both the ChildUnit and the Parent Unit. To Use Your Child Unit and Parent Unit:Channels Must MatchOn/OffVolumeControl2.Adjustthe volume by turning theknob on the side of the ParentUnit. To talk, press and hold thetalk button. Release button tolisten.If desired, turn the vibrate featureon. Vibrate overrides sound,therefore no sound will be heardwhen vibrate is on.CAUTION: Test the Parent Unitbefore each use. It is essential tocheck reception regularly. IMPORTANT: The first time you useyour Child Unit, go through the section“Test the Reception” with two adults.On/OffControlOn/OffVibrateTalkControl08041 Quick Connection 10/9/03 11:25 AM Page 7
8Operating Your Quick Connection Two Way MonitorGuidelines for Good Reception:• Place your Child Unit 4 to 6' (1.5 to 2m) away from the child.• Be certain the Parent Unit and Child Unit are set on the same channel.• Have one adult speak (from a whisper to a yell) into the microphone on the front ofthe Child Unit while another checks the volume and the sound LEDs on the ParentUnit. The more noise your baby makes, the more sound lights will illuminate (Figure 1).• Adjust the volume to a comfortable level for your environment.• Use the Parent Unit far enough away from the Child Unit so as not to getfeedback.• Do not placethe Parent Unit more than 1000' (304.8 m) away from the Child Unit.• If one channel has poor reception try the other channel.NOTE: It is possible for the Parent Unit to pick up sounds or interference fromother signal producing devices including other audio or video monitors whichbroadcast in the 900 MHzrange. To minimize this potential problem, twoindependent channels have been provided. If you experience interference while using one channel setting, simply switch theParent Unit and Child Unitto another channel. Selecting a channel is usually a one-time adjustment. If interference persists on both channels, please refer to theTroubleshooting section at the end of these instructions.CAUTION: To protect your privacy, always turn the Child Unit off when not in use.Always remember that you are using public airwaves. Sound may be broadcast toother receiving devices. Conversations, even from rooms near by, may be broadcast.34To Test the Reception: 1NOTE: It is essential to checkreception regularly. 1.Place the Child Unit 4 to 6' (1.5 to 2m) away. Have an adultspeak into the Child Unit atvarious levels (soft to loud)while another adult checks theParent Unit for the propersound and reception (Figure 1).Turn vibrate to the On positionand test the vibrate feature.Press the talk and hold the talkcontrol and your voice will beheard on the Child Unit. Try theParent Unit in every locationthat it will be used. It is best tofollow these guidelines for goodreception:5 Sound Lights(LEDs)LoudernoiseOn/OffVolume ControlVibrate ControlRange Indicator:Green = goodconnectionRed = poorconnection 2 ChannelsPower On/Low BatteryIndicator:Green = Power OnAmber = Low Battery Talk Control08041 Quick Connection 10/9/03 11:25 AM Page 8
9TroubleshootingProblemParent Unit’s power indicatordoes not illuminatePossible CauseParent Unit is not turned onBatteries are dead/Power is turned offAC Adapter not properlyconnectedSolutionSlide the button on the side ofParent Unit to the on positionMake certain that any light switchesthat control the power flow to thewall outlet are on (when using AC)Make certain that house fuses and circuit breakers are on (whenusing AC)Check AC Adapter jack-to-socketand plug-to-outlet connectionsParent Unit has no sound Volume not turned upChannel switches are not on thesame setting (I or II)Signal interference due tomonitors, cellular or cordlesstelephones, etc.Out of rangeChild Unit near metalconcentrationAdjust the volume control on theParent UnitCheck the channel switches onthe Child Unit and Parent Unit toconfirm they are on the samechannel (I or II)Try the other channelTurn the Child Unit and ParentUnit off, wait a moment thenturn them back onBring Parent Unit closer to ChildUnitTest reception by moving theChild Unit to different locationsthroughout the houseAudio feedback (squealing) Child Unit is too close to theParent UnitMove the Child Unit furtheraway from the Parent UnitLower the volume on the ParentUnitParent Unit not functioning orstatic or power LED is amberBatteries are lowWrong AC adapter usedNot within 1000' (304.8 m)rangeIf amber LED lights or no LEDat all, change the batteriesIf you are not using batteries, becertain that you are using thecorrect AC adapter Move closer to the Child UnitNOTE:Do not return this product to the place of purchase. If you are having difficultyusing product visit our web site at www.safety1st.com or contact ConsumerRelations at (800) 544-1108. Vibrate feature / talk feature notworkingBatteries are lowVibrate not switched to Onposition / talk button not helddown while talkingNot within 1000' (304.8 m)rangeChange the batteriesTurn vibrate On / hold downtalk button while you talk; let goto listenMove closer to the Child Unit08041 Quick Connection 10/9/03 11:25 AM Page 9
10Dorel Juvenile Group, Inc. warrants to the original purchaser that this product(Quick Connection Two Way Monitor), is free from material and workmanshipdefects when used under normal conditions for a period of one (1) year from thedate of purchase. Should the product contain defects in material or workmanshipDorel Juvenile Group, Inc., will repair or replace the product, at our option, free ofcharge. Purchaser will be responsible for all costs associated with packaging andshipping the product to Dorel Juvenile Group Consumer Relations Department atthe address noted below and all other freight or insurance costs associated with thereturn. Dorel Juvenile Group will bear the cost of shipping the repaired or replacedproduct to the purchaser. Product should be returned in its original packageaccompanied by a proof of purchase, either a sales receipt or other proof that theproduct is within the warranty period. This warranty is void if the owner repairs ormodifies the product or the product has been damaged as a result of misuse.This warranty excludes any liability other than that expressly stated previously,including but not limited to, any incidental or inconsequential damages.SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OFINCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONOR EXCLUSION MAY NOT APPLY TO YOU.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAYALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE. One-Year Limited Warranty08041 Quick Connection 10/9/03 11:25 AM Page 10

Navigation menu