Dorel Juvenile Group 49233T Low power UHF transmitter User Manual Operational Manual

Dorel Juvenile Group Low power UHF transmitter Operational Manual

Operational Manual

We are sure that you will find the Clear Connection Nursery Monitor convenient and easy to use. To insure that you will benefit fro mall of the great features that our monitor offers, and to make sure that it is used pro p e r l y, we urge you to:Clear Connection Rechargeable Nursery MonitorO w n e r ’s Guide Thank you for purchasing the Safety 1s t Clear Connection Rechargeable NurseryM o n i t o r. This is a state-of-the-art system that combines some of the most uniquef e a t u r es that any baby monitor offers. We are confident that you will appre c i a t eits many highlights. As you will soon learn there are many more feature s . . .The Baby’s Unit (Transmitter) has continuous transmission that clearly sendsyour baby’s sounds to the Pare n t ’s Unit. This gives you the ability to continuewith your daily activities throughout the house or yard and at the same timemonitor your baby.The Pare n t ’s Unit (Receiver) remains with you wherever you go to pick up thesounds that are transmitted from the Baby’s Unit. It conveniently clips to yourbelt or easily stands on a table.Both units are completely portable or AC powered. The AC Adapter allows thereceiver and transmitter to be plugged into any standard electrical outlet for usewith your household electricity. For convenient use without an outlet, use are c h a r geable battery pack for the Pare n t ’s unit and a 9 volt alkaline battery forthe Baby’s unit (Batteries not included).PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE NURSERY MONITOR KEEP THESE INSTRUCTIONS FOR YOUR FUTURE REFERENCEIF YOU HAVE ANY QUESTIONS, CALL OUR TOLL FREE CONSUMER RELATIONS NUMBER: (800) 723-3065No. 49233CAU T I O N :• THE CLEAR CONECTION RECHARGEABLE NURSERY MONITOR IS NOT INTENDED TO REPLACE RESPONSIBLE ANDPROPER PA R E N TAL SUPERV I S I O N .• YOU SHOULD CHECK YOUR CHILD’S ACTIVITY AT REGULAR INTERVALS AS THIS MONITOR WILL NOT ALERTPARENTS TO THE SILENT ACTIVITIES OF A CHILD.CAU T I O NRISK OF ELECTRIC SHOCKDO NOT OPEN!CAU T I O N : TO REDUCE THE RISK OF ELECTRICAL SHOCK,DO NOT REMOVE COVER OR BAC K .NO SERVICEABLE PA R TS INSIDE.REFER TO SAFETY 1S T CONSUMER RELAT I O N S : (800) 723-3065.WA R N I N G : TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,DO NOT EXPOSE THIS PRODUCT TO WATER OR MOISTURE.Sa fe ty Instru ct i o n sREAD INSTRU C T I O N S : All the safety instructions should be read before the Nursery Monitor is operated.R E TAIN INSTRU C T I O N S : The safety instructions should be retained for future re f e re n c e .HEED WA R N I N G S : All warnings on the Nursery Monitor and operating instructions should be adhered to.F O L LOW INSTRU C T I O N S : All operating instructions should be followed.
Fe at u r es and Co m po n e nt sWATER AND MOISTURE: The Nursery Monitor should not be used near water, for example, near a bath tub, wash bowl, kitchensink, laundry tub, in a wet basement, near a swimming pool, etc.V E N T I L AT I O N :The Nursery Monitor should be placed so that its location or position does not interf e r e with proper ventilationfor the unit. For example, it should N E V E R be situated on a bed, sofa, rug or similar surface that may block ventilation.H E AT: The Nursery Monitor should be kept away from heat sources such as radiators, heat registers, stoves or other appliancesthat produce heat.AC POWER SOURC E : The Nursery Monitor should be connected only to the AC Adapters supplied with the unit.P O WER CORD PROT E C T I O N : The power supply cord should be routed so that it is not likely to be walked on or pinched byitems placed upon or against it. Pay particular attention to the cord at the plug, convenience receptacle, and at the point itexits from the AC adapters.C L E A N I N G : Use a dry cotton cloth to keep the Nursery Monitor free from dust. DO NOT USE WAT E R !NON-USE PERIODS: The power cord of the Nursery Monitor should be unplugged from the outlet when unused for longperiods of time. The batteries should also be removed during these periods.OBJECT AND LIQUID ENTRY: C a re should be taken so that objects do not fall onto the product, and liquids are not spilled intothe enclosure through the openings.D A M AGE REQUIRING SERV I C E : The Nursery Monitor should be serviced by qualified personnel when:A : The power supply cord or plug has been damaged;B : Objects have fallen or liquid has been spilled onto the pro d u c t ;C : The Monitor has been exposed to rain;D : The Monitor does not appear to operate normally or exhibits a marked change in its perf o rm a n c e ;E : The Monitor has been dropped or the enclosure damaged.THE USER SHOULD NOT ATTEMPT TO SERVICE OR REPAIR THE MONITO R . ALL SERVICING SHOULD BE REFERRED TOS A F E TY 1S T CONSUMER RELAT I O N S : (800) 723-3065.KEEP ALL PA R TS OF THIS MONITOR OUT OF REACH OF CHILDREN! DO NOT MOUNT IN OR ON CRIB!CAU T I O N : THE CLEAR CONNECTION RECHARGEABLE NURSERY MONITOR IS NOT INTENDED TO REPLACE P ROPER ADULT SUPERV I S I O N . YOU SHOULD CHECK YOUR CHILD’S AC T I V I TY AT REGULAR I N T E R VALS AS THIS MONITOR WILL NOT ALERT PA R E N T S TO THE SILENT ACTIVITIES OF A CHILD.Co n te nt sParent’s Unit (Receiver) Baby’s Unit (Transmitter)Recharging Stand AC AdapterOn/Off/Volume SwitchChannel SwitchSound LightsPlastic Belt ClipCompartment forRechargeable BatterySpeakerLow Battery Indicator (Red)Power On Indicator (Green) FlexibleAntennaBattery contact forRecharger
Follow these instructions to operate your Clear Connection Rechargeable Monitor. Reference the illustrations provided onpages 2 and 3 for the location of all features described in these instructions. Ba b y’s Un i t :STEP 1 Remove screw from battery cover on Baby’s Unit (Transmitter) and remove cover.STEP 2 I n s e r t a 9-volt battery into the battery compartment by snapping the battery con-tacts into the corresponding connectors on the battery clip in the unit. (Figure 1)No te : The low battery indicator illuminates when the batteries need to be re p l a c e d .STEP 3 Replace the battery cover and insert and tighten the scre w.STEP 4 Plug the adapter into an electrical outlet, then plug the round end of the adapter into the Baby’s UnitNo te : If you experience a power failure, the Baby’s Unit (Transmitter) will automatically switch to battery power. The unit will re v e r t to AC power when power is re s t o re dSTEP 5 Set the On/Off switch to “On” position. Power on indicator should be illuminated.STEP 6 Set the Baby’s unit to setting “A”. If you experience static or noise interf e r ence, switch both units to setting “B”. For best results, place the Baby’s Unit on a table near the crib. It should be facing the baby’s head as close to the crib as possible, but out of baby’s re a c h .O pe rating Your Re c h a r geable Mo n i to rBaby’s Unit (Transmitter)On/Off SwitchLow Battery Indicator (Red)Power On Indicator (Green)Channel SwitchMicrophoneFlexible AntennaAC AdapterThe AC Adapter is a low voltage power source that allows you to use your house-hold electricity to run the Baby’s Unit when you want to conserve battery life. Itconnects to the AC Adapter Jack in the Baby’s Unit, and plugs into any standardelectrical outlet in your home.Caution: This adapter was made with a specific design for Safety 1st ClearConnection Rechargeable Monitor. It cannot be used with any other appliance.Never use a diff e r ent type of adapter with this monitor.AC Ad a p te rAC Adapter JackFigure 1
Low battery indicator will illuminate when it is time to re c h a r ge the battery. Place the receiver in battery stand making sure it is seated pro p e r l yWe recommend that you re c h a r ge the battery overnight. The receiver will operate while re c h a rg i n g .The AC Adapter should be used on the Baby’s Unit whenever possible to increase the life of the batteries. Unit will automati-cally convert to AC operation when used with the AC Adapter. It is not necessary to remove batteries during AC operation.Unit will automatically switch back to battery power when disconnected from the adapter. Pa re n t’s Un i t : Initial Ch a rg i n gIt is very important that you place the Pare n t ’s Unit (Receiver) with the unit turned “Off” in the charging stand. Al l o w bat te r yto charge for at least 4 hours be fo r e first use. This will ensure that your battery is fully charged. The green LED light on thec h a r ging stand will illuminate when the receiver is placed into it and the charging contacts are engaged. Using the Pa re n t’s Un i t :STEP 1 Place the Pare n t ’s Unit at least 10 feet from the Baby’s Unit. STEP 2 Place the charging stand in a location where the Receiver will remain in high use, for example, bedroom, kitchen, etc.STEP 3 Plug the charging stand into electrical outlet. STEP 4 When the Receiver is in the charging stand, the battery will continue to charge during normal operation. STEP 5 Tu r n the Pare n t ’s Unit “OFF” and leave unit in charging stand when not in use. This will allow the battery to receive a complete charg e .No te : If you experience a power failure, the Pare n t ’ s Unit (Receiver) will automatically switch to battery power. The unit will re v e r t to AC power when power is re s t o re d .STEP 6 Set the Pare n t ’ s Unit to setting “A”. If you experience static or noise interf e r ence, switch both units to setting “B”.No te : C o n f i r m the Pare n t ’s Unit and Baby’s Unit are set to the same setting (A or B). Adjust the volume so you can hear yourbaby at all times.LED Sound Level Light Indicato r sThe three (3) LED’s in the center of the Pare n t ’s Unit light up to display the sound level coming from your baby. These soundlevel indicators are preset in the factory and are not affected by the volume setting. This feature allows you to see the re l a t i v evolume level of your baby’s sounds. It is most effective if you are in a noisy environment and may not be able to hear thesounds clearly. The louder the sound, the more LED’s will light up. Using the AC Ad a p te rRe c h a rging the Bat te r yReplacing the Re c h a r geable Bat te r yThe Parent's Unit (Receiver) re q u i r es 1 Ni-Cad re c h a r geable 3.6volt,300 mAh battery pack. To ensure that you are purc h a s i n gthe proper replacement battery pack, we recommend that you bring the existing battery pack with you to re f e rence. It is criti-cal that the connector on the end of the battery pack is identical to the connector on the enclosed battery pack. (Figure 2)Figure 4STEP 1 U n s c r ew the battery door located on the back of the Parent's Unit(Receiver).STEP 2 Remove the Ni-Cad re c h a rgeable battery pack from thebattery compartment by gently disengaging the two connectors.( F i g u r e 3)STEP 3 D i s c a r d the old Ni-Cad re c h a r geable battery pack pro m p t l y.STEP 4 Reconnect the new battery pack by re-engaging the two connector ends. (Figure 4)STEP 5 S c r ew the battery door back on to the Parent's Unit (Receiver). Ensure that the door is securely fastened.STEP 6 Place the Parent's Unit (Receiver) in the charging stand with the unit turned "OFF". Al l ow the bat te r y to charge for at least 4 hours prior to use.Figure 2 Figure 3
•Recharge battery overnight.•Make sure battery is fullycharged.•May need new battery in babyunit.•Make sure both units are on thesame channel (A or B)•Turn off the appliances that maybe causing interference•Reduce the distance between the two units or turn off lights•Switch channel setting on bothParent’s and Baby’s Units•Parent’s Unit needs to be at least 10 feet (3 meters) awayfrom the Baby’s Unit•Change both units to the alternate channel (A or B)•Check batteries, replace if necessary•Move the units closer to eachother•Battery may be dead, 9 volt batteryneeds to be replaced, or rechargeablebattery needs to be recharged•Make sure wall outlet is working. •Rechargeable battery needs to be replaced.•Baby’s and Parent’s Units may be seton different channels•Appliances with loud fans near unitsmay be blocking transmission•Unit may be under fluorescent lights•Local interference from electrical orradio frequency appliance near yourlocation•Units are too close together•Neighbors may have a baby monitoror cordless phone•Batteries may be weak•Units may be too far away from each other•Power indicator light not working•Power is not getting to the unit•Static or interference in the signaltransmission•Parent’s Unit is making loud noises•Parent’s Unit is picking up noisesfrom outside your home•Weak sound coming from unitSolutionPossible CauseProblemTro u b l e s h ooting Your Re c h a r geable Mo n i to rO pe rating Ti p sIf you have any questions or comments, please call our toll free Consumer Relations number: (800) 723-3065. We guarantee all of our Safety 1st products. If you are not completely satisfied, please re t u r n with proof of purchase to: Safety 1s t , Inc., 210 Boylston Street Chestnut Hill, MA 02467 USA Safety 1s t , Inc., 804, Rue Deslauriers, Ville St-Laurent, Québec, H4N 1X1 CanadaSafety 1s t , Inc., Europe Ltd. Osopad House, Shenley Road Borehamwood, Herf o rd s h i re WD1TE, Great BritainMade in CHINA to Safety 1s t quality specifications. ©1998 Safety 1s t , Inc. 1 1 / 9 8•Make sure that both units are on the same channel. Even though you may hear your baby’s sounds, proper use of this systemre q u i r es that both units must be on the same channel. If the units are on diff e rent channels, the signals from the Baby’s Unit may still be strong enough to be picked up by the Pare n t ’s Unit, but there will be a lot of static.•When unit is not in use, remove AC Adapter and be sure the power dial is “Off ” .•Use your Baby’s Unit AC Adapter when you will be in the same location for most of the day. Use of the adapter provides maximum power to the unit and provides additional antenna length.•When using the AC Adapter with household electricity, make sure the outlet has power. Some electrical outlets are p o w e r ed through a wall switch in the room. If the Baby’s Unit is plugged in and turned “On”, the power indicator light should be lit. If it is not, try turning the wall switch in the room “On”.
IMPORTANT!Please do not re t u rn this prod u c t to the sto r e! Your questions and co m m e n ts are impo rt a nt to us!Thank you for purchasing this quality product from Safety 1s t . We are confident you will bepleased with its many features and perf o r mance. If you are having any problems assembling,installing, or using this product, please call us. We will be very happy to answer any questionsthat you may have. Many times there is a simple solution to any problem that may occur.Talking to us directly will be convenient and save you time.Call our Consumer Re l a tions De p a rt m e nt to l l - f r ee at (800) 723-30659:00 am to 5:00 pm (EST) Mo n d a y - Fri d a y.We will gladly answer any and all of your questions a bout this prod u ct.

Navigation menu