Dorma C800 Knob Wood/Metal Door W/ 1” Face Plate Technical Drawing 76019187 188 Rev1115 Combined
User Manual: Dorma C800 Knob Wood/Metal Door w/ 1” Face Plate Technical Drawing Tech Drawing
Open the PDF directly: View PDF 
.
Page Count: 2
1/8" OVER 2" BEVEL
[3mm OVER 51mm]
BACKSET TO C
L
OF DOOR THICKNESS BACKSET
BEVELED EDGE DETAIL
C
L
5/32"
4
C
L
DOOR FACE DETAIL
2-1/8"
54
SQUARE EDGE DETAIL
C
L
5/32"
4
76019187
Facsimile: (800) 274-9724 template at www.dorma.com.
Reamstown, PA 17567
TMP No. PAGE: 1 of 1
DORMA USA, Inc.
Rev.
Always consult DORMA's web site for latest Toll-Free: (800) 523-8483
11/15
WOOD DOORS FOR:
CK800 - BALL KNOB
FACE PLATE 1" FLAT OR BEVELED
NOTES:
DRAWING IS NOT TO SCALE.1. DIMENSIONS ARE IN INCHES/[MM].2.
DOOR EDGE DETAIL
C
L 5/16"
7.9
25.4
7/64" PILOT HOLE x 1" DEEP
2 PLCS
2-1/4"
41.3 57.2
1-5/8"
1"
1"
25.4
0.125" OVER 2.0 BEVEL
[3.2mm OVER 51mm]
BACKSET TO C
L
OF DOOR THICKNESS
FACE PLATE 1" FLAT OR BEVELED
CK800 - BALL KNOB
METAL DOORS FOR:
NOTES:
DRAWING IS NOT TO SCALE.1. DIMENSIONS ARE IN INCHES/[MM].2.
1 of 1
76019188
Reamstown, PA 17567
TMP No. PAGE: Rev.
DORMA USA, Inc. template at www.dorma.com.
Always consult DORMA's web site for latest
Facsimile: (800) 274-9724
Toll-Free: (800) 523-8483
11/15
SQUARE EDGE DETAIL
C
L
BACKSET
.156+
-.015
.000
[4]
DOOR FACE DETAIL
NOTE: LATCH CASE AND LOCK
CHASSIS SUPPORTS MUST BE
DESIGNED TO PROVIDE
ADEQUATE STRENGTH TO
SUPPORT THE LOCK WITHOUT
CRUSHING THE DOOR.
C
L
2.125+
-.015
.000
[54]
DOOR EDGE DETAIL
DRILL & TAP FOR
#8-32
2 PLCS
C
L
-
1.000
1.000+.030
.000
[25.4]
[57.2]
.000
.030
-
+
2.250
[41.3]
.000
.030
-
+
1.625
+
[25.4]
.000
.030
-
.313+
-.030
.000
[7.9]
BEVELED EDGE DETAIL
C
L
.156+
-.015
.000
[4]
