Dorma 2018 Architectural Hardware Price Book

User Manual: Dorma 2018 Dorma Architectural Hardware Price Book Price Book

Open the PDF directly: View PDF PDF.
Page Count: 372 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Architectural
Hardware
Pricelist 28
January 3, 2018
Introduction Terms of Sale v
Freight Policy vi
Limited Warranty Policy vii
Finishes Cross Reference viii
Select Service Quick Ship Ordering Information S1
Locks S2
Exit Devices S6
EAC Components S8
Low Energy Operator S9
Surface Closers S10
Electromagnetic Door Holders S12
Concealed Closers/Pivots S12
Locks Locks Product Guide 1
M9000 Grade 1 Mortise Series 3
D900 Grade 1 Mortise Dead Bolt Series 15
T900 Tubular Series 19
C800 Grade 1 Cylindrical Series 25
D800 Grade 1 Dead Bolt Series 35
CL700/CK700 Grade 2 Cylindrical Series 41
C500 Grade 2 Cylindrical Series 49
DB600 Grade 2 Dead Bolt Series 53
C300 Grade 2 Cylindrical Series 57
J300 Grade 2 Interconnected Series 59
Cylinders, Keys, and Keying Cylinders, Keys, and Keying Product Guide 61
Master Keying/DORMA SKC Policy 62
Mortise Cylinders 63
Rim Cylinders 68
Key-in-Knob/Lever Cylinders 70
Hotel Cylinders 71
Small Format Interchangeable Cores 73
Large Format Interchangeable Cores 74
Retrofit Cylinder Housings 75
Tailpieces 76
Keys and Key Blanks 77
SFIC Padlocks 79
Service Parts 80
Labeling and Cylinder Marking 82
Merchandising Aids 83
Exit Devices Exit Device Product Guide 85
9000 Series 87
9000 Series Wide Stile Exits 88
9000 Series Wide Stile Trim 99
9000 Series Narrow Stile Exits 116
9000 Series Narrow Stile Trim 125
8000 Series 135
Table of Contents
Intro
ii Architectural Hardware Price List #28
Table of Contents
8000 Series Exits 136
8000 Series Trim 142
Mullions 151
Electronic Access Control Components InSync Electronic Locks 153
InSync D Dead Bolt 154
InSync I Interconnected 156
InSync L Tubular 158
InSync M Mortise 160
InSync CP Exit Trim 162
InSync CR Common Reader 164
InSync SAM RF Software 166
InSync Accessories 166
dormakaba E-Plex and Powerplex 167
PS Series 170
ES Series 173
EML Series 177
EMLSG Series 185
EMSL Series 187
EMDE Series 189
AC Series 191
PB Series 193
39 Series 197
KS Series 199
Accessories 202
Low Energy Operators ED900 Series 205
Surface Closers Surface Closers Product Guide 209
TS93 Series 211
8900 Series 215
8600 Series 221
7400 Series 225
U1500 Series 229
7300 Series 231
STA Series 235
GSR Series 237
Modular Packaging 239
Fire/Life Safety Fire/Life Safety Product Guide 241
EMR/EMF Series 243
1800 Series 247
EM Series 251
Concealed Closers/Pivots Concealed Door Closers Product Guide 253
BTS80 Series 255
BTS80 EMB Series 261
BTS75V Series 267
ITS96 Series 273
RTS88 Series 275
LM Series Heavy-Duty Pivots 281
LM Series Extra Heavy-Duty Pivots 285
Intro
iii
Architectural Hardware Price List #28
Table of Contents
Stops/Holders 900/700 Series 289
Sliding Systems MUTO Comfort with Wood Panels 293
MUTO Comfort XL 150 DORMOTION 297
MUTO Comfort XL 150 302
MUTO Comfort XL 80 DORMOTION 307
MUTO Comfort XL 120 Self-Closing 312
MUTO Comfort L 80 DORMOTION 317
MUTO Comfort L 80 322
MUTO Comfort M 50 327
Accessories and Components 328
Architectural Pulls and Handles Finishes Cross Reference 337
TG 138 Locking and Non-Locking Ladder Pulls 338
TG 9387 Non-Locking Ladder Pulls 341
MANET Non-Locking Ladder Pulls 344
TG Decorative Pulls 347
ARCOS and BEYOND Decorative Pulls 348
Pull Handles for Commercial Doors 349
Intro
iv Architectural Hardware Price List #28
Table of Contents
(Effective January 3, 2018)
Prices — The price list in effect on the date the customer order is received will determine billing price. Orders requiring price protection must be
clearly indicated and received prior to the effective date of the price list increase. Delivery of price-protected orders will only be honored for
immediate shipment. Orders requiring delivery in excess of three (3) months will be billed at prices in effect at time of shipment, unless otherwise
quoted in writing by dormakaba. Prices and availability subject to change without notice.
Terms — 1% -10 days; Net - 30.
Orders — We reserve the right to decline the whole or part of orders in which price, finishes, or quantity of goods or credit status of the buyer is
not satisfactory to us. We reserve the right to discontinue items or change specifications at any time without notice and without incurring any
obligations. dormakaba cannot be held liable for extended delivery dates that may result in the cancellation of an order.
Acknowledgements — Acknowledgements are exact copies of the manufacturing order and should be checked upon receipt. If incorrect, please
notify us immediately.
Cancellations — While dormakaba will attempt to comply with customer’s telephone or written change orders and/or cancellations, we cannot
guarantee that they can be accomplished before shipment. Appropriate handling charges on returns will be exercised if the order has been
shipped before processing a change order request. A cancellation or change charge will apply if any costs for material or labor have been incurred
prior to notification by customer of the change.
Shipments — Shipment dates are contingent upon conditions at the time of order acknowledgement and can be subject to delays caused by
shortages of materials, strikes, or other labor problems, equipment failure, fire, flood or other acts of God, or causes beyond our control.
dormakaba will not be liable under any circumstances for consequential damages arising from any delays.
Claims — All claims, whether referring to errors in prices, in filling orders, or for defective goods, must be submitted IN WRITING within 30 days
after receipt of shipment. Requests for tracing of all lost shipments must be submitted IN WRITING within 30 days or the liability and risk is
placed on the purchaser. All issued documents by a carrier confirming receipt of a shipment must be honored by the purchaser.
Return Goods — Returned goods will not be accepted unless authorized by a Return Goods Authorization (RGA) in writing within 120 days of
invoice date. An RGA becomes void 30 days after its issue date. Credit will be given for products that are current production, new, unused, and in
undamaged condition as received at the dormakaba facility. A minimum 35% restock charge will apply. Exit devices should be shipped to
dormakaba USA, Inc. Returns Department, 1003 West Broadway, Steeleville, Illinois 62288. Locks should be shipped to dormakaba USA, Inc.
Returns Department, 38 Industrial Circle, Lancaster, PA 17601. All other products should be shipped to dormakaba USA, Inc. Returns
Department, Dorma Drive, Reamstown, PA 17567. Returned material must be freight prepaid. Any exceptions to this policy will be noted on the
RGA document.
To protect our customers from liability, do not sign the delivery receipt until shipment has been inspected thoroughly.
Customer is responsible to make necessary notations on the delivery receipt after inspection. Failure to note damaged items and/or shortages on
the receipt releases dormakaba from all liability; therefore, customer is responsible for any replacement costs. If damage or shortage is noted,
please notify your dormakaba customer service representative within 48 hours of receiving your shipment.
Product Modifications — Unauthorized modifications to dormakaba USA, Inc. (dormakaba) products by a third party will void the factory limited
warranty. For a full description, please refer to the LIMITED WARRANTY POLICY. Any listings and/or certifications, such as Underwriters
Laboratory, ANSI/BHMA certification, and other similar listings, do not apply to products modified outside dormakaba’s U.S. plants. Any modified
product cannot be advertised, promoted or sold as a dormakaba product. The party, or parties, modifying dormakaba products bear sole and
complete responsibility for the modified product.
Terms of Sale
Intro
v
Architectural Hardware Price List #28
Terms of Sale
(Effective January 3, 2018)
Freight Policy for Consignees within Contiguous United States
Customer orders that exceed $5,000 (USD) in net value (before tax and freight) will be shipped by a carrier selected by dormakaba, freight
prepaid as a single shipment to a single business destination within the contiguous United States. Other terms apply to Alaska, Hawaii, Puerto
Rico, and export orders. When a customer requests either multiple destinations or multiple shipments to the same destination, the $5,000
minimum will apply to each shipment requested. Items backordered from an order qualifying for prepaid shipping charges will be shipped prepaid.
Orders less than $5000 in net value will be shipped by a carrier selected by dormakaba, with shipping and handling charges added to the
customer’s invoice.
All charges resulting from customer designated carrier, air freight, special handling, special routing or other freight services requested by the
customer will be prepaid and added to the customers invoice.
All goods ship F.O.B. factory. Title and risk of loss pass to the customer upon tender of shipment to the carrier. If product is damaged in transit,
consignee must file claim with the carrier.
Freight Policy for Consignees in Alaska, Hawaii, Puerto Rico, and Destinations Outside the Contiguous United States
Customer orders that exceed $5,000 (USD) in net value (before tax and freight) will be shipped by a carrier selected by dormakaba, freight
prepaid to a U.S. airport or port of exit for single shipment orders. When a customer requests either multiple destinations or multiple shipments
to the same destination, the $5,000 minimum will apply to each shipment requested. Items backordered from an order qualifying for prepaid
shipping charges will be shipped prepaid as Buyer’s exclusive remedy.
At dormakaba’s option, this freight policy may be subject to special terms and conditions for certain export orders. Orders less than $5000 in net
value will be shipped to a US airport or port of exit by a carrier selected by dormakaba, with shipping and handling charges added to the
customer’s invoice.
All charges resulting from customer designated carrier, air freight, special handling, special routing, or other freight services requested by the
customer will be prepaid and added to the customer’s invoice.
All goods ship F.O.B. factory. Customer shall be responsible for obtaining insurance. Title and risk of loss for products shall pass when made
available to customer on delivery to carrier in the United States; provided that if payment has not been made at the time of shipment, dormakaba
shall retain title (but not risk of loss) until payment has been made. If product is damaged in transit, customer must file claim exclusively with
airline, carrier, vessel and/or insurance company; provided, however, that if dormakaba has not received payment in full at the time the product is
damaged in transit, dormakaba shall have the right to file claim exclusively with airline, carrier, vessel and/or insurance company.
Freight Policy
Intro
vi Architectural Hardware Price List #28
Freight Policy
(Effective January 3, 2018)
For projects located in the United States and Canada, all products sold are warranted to be free from defects in workmanship and materials for
the periods listed in the table below, from the date of manufacture. THIS COMPRISES SELLER’S SOLE AND EXCLUSIVE WARRANTY AND IS
MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE
CONCERNING THE PRODUCTS, AND ALL OTHER WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR INTENDED PURPOSE, ARE HEREBY DISCLAIMED AND EXPRESSLY EXCLUDED. SELLER DOES NOT WARRANT AGAINST
UNITED STATES PATENT INFRINGEMENT BY WAY OF THE USE OF PRODUCTS IN COMBINATION WITH OTHER PRODUCTS.
For projects located outside the United States or Canada, the limited warranty period for all products is 1 year from the date of manufacture.
dormakaba regional businesses located outside the United States or Canada may offer different warranty periods. “United States and Canada”
is defined as the several states of the United States, the District of Columbia, the commonwealths, territories and possessions of the United
States and the provinces and territories of Canada.
None of the warranties set forth herein shall extend to any products or parts thereof that have been subjected to improper installation, lack of, or
improper, maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, neglect, accident, unauthorized service, use of
unauthorized parts, or performance of repairs, modifications or attachment to other products outside of Seller’s plant. These warranties shall
neither extend to nor cover any labor charges for replacement of products or parts, adjustments, or repairs, or any other work, which costs shall
be the sole responsibility of Buyer. These warranties are extended only to Seller’s distributors of products and the first user who purchases
products for purposes other than resale (collectively, “Buyer”).
Buyer’s sole and exclusive remedy against Seller for any claim, whether in contract, tort or otherwise, arising out of, or resulting from the purchase
of the products shall be limited to the repair or replacement of any product or part thereof, which is proved to be other than as warranted, or, at
the sole option of Seller, to the issuance of a credit in an amount not to exceed the cost of the repair or replacement. In no event shall Seller be
liable to Buyer or any other party for, and Buyer waives, any and all other damages, including, without limitation, incidental, special, indirect,
collateral, punitive or consequential damages, including, without limitation, loss of profits, or loss of use damages or downtime costs. If a product
is claimed to be other than as warranted, Seller, upon notice promptly given, will either examine the goods at Buyer’s site or issue shipping
instructions for return of product to the Seller (transportation costs prepaid by Buyer and all cost associated with the removal and reinstallation
of such product to be the sole responsibility of Buyer).
Any representations, warranties or promises inconsistent with, or in addition to, the warranties contained herein are unauthorized and shall not
be binding upon Seller. Because Seller has no control over the conditions under which its products are used, Seller specifically does not warrant
the adequacy or sufficiency of any advice or recommendations given to Buyer. Nor does Seller warrant that every Seller product complies with
every code, standard or regulation in every community except as specifically stated in a published Seller catalog or in writing signed by an officer
of Seller. Seller shall not be bound by the terms of any agreements between a Buyer and third parties.
Limited warranty period (years) by product (from date of manufacture) Mechanical Electrical
Door Controls TS93, 8900, 8600, 7400, 7300, BTS75V, BTS80 25 N/A
U1500 10 N/A
ITS, RTS 5 N/A
EMR, EMF, 1800, GSR 25 2
EMB, EM, EAC, ED900 2 2
LM, 900, 700 2 N/A
Exit Devices 9000 10 2
8000 5 2
Mullions 2N/A
Mechanical Locks M9000, D900, C800, D800 10 2
CL/CK700, J300, DB600 5N/A
C500, T900 3N/A
C300 1 N/A
SKC Keys Lifetime N/A
Electronic Locks InSync, SAM RF 1* 1*
E-Plex/Powerplex 3 3
Sliding Systems MUTO Comfort 2 N/A
All other products not listed 2 1
*Term begins at start of installation
Limited Warranty Policy
Intro
vii
Architectural Hardware Price List #28
Limited Warranty Policy
Finish Description Finish Appearance dormakaba/BHMA Code Nearest U.S. Equivalent
Brass Bright 605 US3
Satin 606 US4
Bronze Polished 611 US9
Satin 612 US10
Oil Rubbed/Dark Satin 613 US10B
Nickel Bright 618 US14
Satin 619 US15
Chrome Bright 625 US26
Satin 626 US26D
Stainless Bright 629 US32
Satin 630 US32D
Aluminum Satin Anodized 628 US28
Dark Oxidized Bronze Satin Anodized 710 US10B
Flat Black Anodized 711 US19
Aluminum Painted or Powder Coated 689 US28
Dark (Statuary) Bronze Painted or Powder Coated 690 US20
Light (Dull) Bronze Painted or Powder Coated 691 US10
Black Painted or Powder Coated 693 Black Anodized
Dark (Duronodic) Bronze Painted or Powder Coated 695 Dark Bronze Anodized
Satin Brass (Gold) Painted or Powder Coated 696 US4
Primed Painted or Powder Coated 600 USP
Custom Painted or Powder Coated Custom RAL Pallet
Designer Painted Designer Sample Match
* Excluding Mechanical Locks, Architectural Pulls & Handles, and Sliding Systems. See appropriate product section for available finishes.
Reference: ANSI A156.18 American National Standard for Materials and Finishes
600 Series Plated Finishes designate the appearance of the finish, regardless of the base material. For example, 605 defines a polished brass
material, but 605 can be any base material, like steel or stainless, that is finished to provide the appearance of polished brass.
Standard sprayed finishes are shown above.
For a Custom Color, refer to the Custom Color Pallet. For Door Controls, a $105.00 net setup fee per purchase order, per color will be charged.
For exits and trim, a $115.00 net setup fee per purchase order, per color will be charged. For a copy of the Custom Color Pallet, please contact
your Representative or our Customer Service Department. Locks are NOT included in the Custom Color program.
For a Designer Color, custom matched to a supplied sample, three (3) each 2" × 3" color chip samples are required. For Door Controls, a
non-refundable fee of $260.00 net is required per color match request, per order prior to processing. For exits and trim, non-refundable $415.00
net fee is required per color match request, per order prior to processing. Allow six (6) weeks for designer color development. If a match can not
be made to the customer’s satisfaction after three (3) attempts, dormakaba reserves the right to decline the order. Metallic colors are difficult to
duplicate and may be rejected. Locks are NOT included in the Designer Color program.
Please contact our Sales Service Department, or your local sales representative for further information.
Finishes Cross Reference*
(Effective January 3, 2018)
Finishes Cross Reference
viii Architectural Hardware Price List #28
... Select Service Quick Ship Program
S
Architectural Hardware Price List #28
Contents
Locks S
Exit Devices S
EAC Components S
Low Energy Operator S
Surface Closers S
Electromagnetic Door Holders S
Concealed Closers/Pivots S
Key
N"New" to Select Service,
Available in East and West Coast Warehouse
Available in East and West Coast Warehouse
EAvailable only in East Coast Warehouse
Select Service Quick Ship Program
Sold To: Purchase Order #:
Ship:
Date:
Signature:
FOR INTERNAL USE ONLY
Customer Account #
Factory Order #
Edit Checked by:
Fax or EMAIL Orders to:
dormakaba USA, Inc.
866-376-7632
hardwareselect.us@dormakaba.com
NOTES:
Standard freight and discount schedules and terms of sale apply.
Please refer to current price list for details.
We reserve the right to limit quantities or decline an order if the
credit status of the buyer is not satisfactory.
Orders cannot be cancelled.
Select Service Quick Ship available only in the United States.
All prices in U.S. dollars.
Products and prices are subject to change without notice.
Limited quantities available.
(Orders will not be processed without authorized signature)
Select your shipping preference below:
(Please check box for desired service, if applicable)
FedEx Next Day
FedEx nd Day
FedEx Ground
TRUCK
Select Service Quick Ship Program
S Architectural Hardware Price List #28
Locks
Locks
C Series Grade  Cylindrical Lever Locks
PN # Warehouse Product Lever Rose Latch Strike Finish Keying List $
 Finish, E Rose
 C Single Dummy LR E -/" – -/" Face ANSI -/"  
 C Passage LR E -/" – -/" Face ANSI -/"  
 C Privacy LR E -/" – -/" Face ANSI -/"  
 CD Entry LR E -/" – -/" Face ANSI -/"  SCKD 
 CJ Entry LR E -/" – -/" Face ANSI -/"  IC 
 CD Classroom LR E -/" – -/" Face ANSI -/"  SCKD 
 CJ Classroom LR E -/" – -/" Face ANSI -/"  IC 
 CD Storeroom LR E -/" – -/" Face ANSI -/"  SCKD 
 CJ Storeroom LR E -/" – -/" Face ANSI -/"  IC 
 EC Single Dummy LC E -/" – -/" Face ANSI -/"  
 EC Passage LC E -/" – -/" Face ANSI -/"  
 EC Privacy LC E -/" – -/" Face ANSI -/"  
 ECD Entry LC E -/" – -/" Face ANSI -/"  SCKD 
 ECJ Entry LC E -/" – -/" Face ANSI -/"  IC 
 ECD Classroom LC E -/" – -/" Face ANSI -/"  SCKD 
 ECJ Classroom LC E -/" – -/" Face ANSI -/"  IC 
 ECD Storeroom LC E -/" – -/" Face ANSI -/"  SCKD 
 ECJ Storeroom LC E -/" – -/" Face ANSI -/"  IC 
 Finish, C Rose
 C Single Dummy LR C -/" – -/" Face ANSI -/"  
 C Passage LR C -/" – -/" Face ANSI -/"  
 C Privacy LR C -/" – -/" Face ANSI -/"  
 CD Entry LR C -/" – -/" Face ANSI -/"  SCKD 
 CJ Entry LR C -/" – -/" Face ANSI -/"  IC 
 CD Classroom LR C -/" – -/" Face ANSI -/"  SCKD 
 CJ Classroom LR C -/" – -/" Face ANSI -/"  IC 
 CD Storeroom LR C -/" – -/" Face ANSI -/"  SCKD 
 CJ Storeroom LR C -/" – -/" Face ANSI -/"  IC 
 EC Single Dummy LC C -/" – -/" Face ANSI -/"  
 EC Passage LC C -/" – -/" Face ANSI -/"  
 EC Privacy LC C -/" – -/" Face ANSI -/"  
 ECD Entry LC C -/" – -/" Face ANSI -/"  SCKD 
 ECJ Entry LC C -/" – -/" Face ANSI -/"  IC 
 ECD Classroom LC C -/" – -/" Face ANSI -/"  SCKD 
 ECJ Classroom LC C -/" – -/" Face ANSI -/"  IC 
 ECD Storeroom LC C -/" – -/" Face ANSI -/"  SCKD 
 ECJ Storeroom LC C -/" – -/" Face ANSI -/"  IC 
N
Select Service Quick Ship Program
S
Architectural Hardware Price List #28
Locks
CL Series Grade  Cylindrical Lever Locks
PN # Warehouse Product Lever Rose Latch Strike Finish Keying List $
 Finish
 CL Single Dummy LR E -/" – -/" Face ANSI -/"  
 CL Passage LR E -/" – -/" Face ANSI -/"  
 CL Privacy LR E -/" – -/" Face ANSI -/"  
 CLD Entry LR E -/" – -/" Face ANSI -/"  SC KD 
 CLJ Entry LR E -/" – -/" Face ANSI -/"  IC 
 CLD Classroom LR E -/" – -/" Face ANSI -/"  SC KD 
 CLJ Classroom LR E -/" – -/" Face ANSI -/"  IC 
 CLD Storeroom LR E -/" – -/" Face ANSI -/"  SC KD 
 CLJ Storeroom LR E -/" – -/" Face ANSI -/"  IC 
 ECL Single Dummy LC E -/" – -/" Face ANSI -/"  
 ECL Passage LC E -/" – -/" Face ANSI -/"  
 ECL Privacy LC E -/" – -/" Face ANSI -/"  
 ECLD Entry LC E -/" – -/" Face ANSI -/"  SCKD 
 ECLD Classroom LC E -/" – -/" Face ANSI -/"  SCKD 
 ECLD Storeroom LC E -/" – -/" Face ANSI -/"  SCKD 
 Finish
 ECL Single Dummy LR E -/" – -/" Face ANSI -/"  
 ECL Passage LR E -/" – -/" Face ANSI -/"  
 ECL Privacy LR E -/" – -/" Face ANSI -/"  
 ECLD Entry LR E -/" – -/" Face ANSI -/"  SCKD 
 ECLD Classroom LR E -/" – -/" Face ANSI -/"  SCKD 
 ECLD Storeroom LR E -/" – -/" Face ANSI -/"  SCKD 
Select Service Quick Ship Program
S Architectural Hardware Price List #28
Locks
C Series Economy Grade  Cylindrical Lever Locks
PN # Warehouse Product Lever Rose Latch Strike Finish Keying List $
 Finish
 C Single Dummy LR C -/" – " Face with Filler ANSI -/"  
 C Passage LR C -/" – " Face with Filler ANSI -/"  
 C Privacy LR C -/" – " Face with Filler ANSI -/"  
 CD Entry LR C -/" – " Face with Filler ANSI -/"  SCKD 
 CJ Entry LR C -/" – " Face with Filler ANSI -/"  IC 
 CD Classroom LR C -/" – " Face with Filler ANSI -/"  SCKD 
 CJ Classroom LR C -/" – " Face with Filler ANSI -/"  IC 
 CD Storeroom LR C -/" – " Face with Filler ANSI -/"  SCKD 
 CJ Storeroom LR C -/" – " Face with Filler ANSI -/"  SCKD 
 C Single Dummy LC C -/" – " Face with Filler ANSI -/"  
 C Passage LC C -/" – " Face with Filler ANSI -/"  
 C Privacy LC C -/" – " Face with Filler ANSI -/"  
 CD Entry LC C -/" – " Face with Filler ANSI -/"  SCKD 
 CD Storeroom LC C -/" – " Face with Filler ANSI -/"  SCKD 
 Finish
 C Passage LR C -/" – " Face with Filler ANSI -/"  
 C Privacy LR C -/" – " Face with Filler ANSI -/"  
 CD Entry LR C -/" – " Face with Filler ANSI -/"  SCKD 
 CD Storeroom LR C -/" – " Face with Filler ANSI -/"  SCKD 
Select Service Quick Ship Program
S
Architectural Hardware Price List #28
Locks
C/J Series Grade  Cylindrical and Interconnected Locks
PN # Warehouse Product Function
Lever
Latch Strike Finish Keying List $
 Finish
 C Single Dummy LR  
 C Passage LR N R Full Lip Radius  
 C Privacy LR N R Full Lip Radius  
 C Keyed Entry LR F R Full Lip Radius  SCKD 
 C Passage LC N R Full Lip Radius  
 C Privacy LC N R Full Lip Radius  
 C Keyed Entry LC F R Full Lip Radius  SCKD 
 J Entry, Single Cylinder LR F S T Strike  SCKD 
 J Entry, Single Cylinder LC F S T Strike  SCKD 
/ Finish
 Latch C/C N S / 
 Finish
 C Single Dummy (LH) LS  
 C Single Dummy (RH) LS  
 C Passage (LH) LS N R Full Lip Radius  
 C Passage (RH) LS N R Full Lip Radius  
 C Privacy (LH) LS N R Full Lip Radius  
 C Privacy (RH) LS N R Full Lip Radius  
 C Keyed Entry (LH) LS F R Full Lip Radius  SCKD 
 C Keyed Entry (RH) LS F R Full Lip Radius  SCKD 
 Finish
 C Passage LC N R Full Lip Radius  
 C Privacy LC N R Full Lip Radius  
 C Keyed Entry LC F R Full Lip Radius  SCKD 
Deadbolts
PN # Warehouse Product Latch Finish Keying List $
 Finish
 DBD Cylinder × Turn Adj, " Face with Filler  SCKD 
 DBJ Cylinder × Turn Adj, " Face with Filler  IC 
 EDBD Cylinder × Cylinder Adj, " Face with Filler  SCKD 
 Finish
 DBD Cylinder × Turn Adj, " Face with Filler  SCKD 
 DBJ Cylinder × Turn Adj, " Face with Filler  IC 
 EDBD Cylinder × Cylinder Adj, " Face with Filler  SCKD 
Select Service Quick Ship Program
S Architectural Hardware Price List #28
Exit Devices
 Series Grade  Wide Stile Exit Devices
PN # Warehouse Product Length Height Hand Strike Finish List $
  B —   
  B —   ,
  A —   ,
 EF B —   
 F B —   ,
 F A —   ,
 E B ' RHR /  ,
 E B ' LHR /  ,
 F B ' RHR /  ,
 F B ' LHR /  ,
 ELB (Less bottom rod) B ' RHR   ,
 ELB (Less bottom rod) B ' LHR   ,
 ELBF B ' RHR   ,
 ELBF B ' LHR   ,
 E *() B RHR   ,
Exit Devices
* For EO, , ,  functions use  device
 Series Wide Stile Trim
PN # Warehouse Product Cylinder Keying Finish List $
 HRT D SC KD  
 PRT — —  
 EPRT — —  
 EYC D SC KD  
 YR D SC KD  
 YR L —  
 EYRM ( Series Only) D SC KD  
 EYT D SC KD  
 YC — —  
 YR — —  
Select Service Quick Ship Program
S
Architectural Hardware Price List #28
Exit Devices
 Series Grade  Narrow Stile Exit Devices
PN # Warehouse Product Length Height Hand Strike Finish List $
 E BB —   ,
 E BB ' RHR /  ,
 E BB ' LHR /  ,
 Series Narrow Stile Trim
PN # Product Cylinder Keying Finish List $
 EZP — —  
 EZP D SC KD  
 EZR D SC KD  
 EZT D SC KD  
 Series Grade  Standard Exit Devices
PN # Warehouse Product Length Height Hand Strike Finish List $
  B —   
  A —   
 F B   
 E B ' RHR /  
 E B ' LHR /  
 F B ' RHR /  
 F B ' LHR /  
 Series Trim
PN # Warehouse Product Cylinder Keying Finish List $
 EPDT — —  
 EP D SC KD  
 R D SC KD  
 R D SC KD  
 RJ J  
 ERJ J  
 R  
 R  
Mullions
PN # Warehouse Product Finish List $
 - (Steel mullion)  
 EF- (Fire listed steel mullion)  
 F KR- (Fire listed key removable mullion)  ,
Select Service Quick Ship Program
S Architectural Hardware Price List #28
Exit Devices EAC Components
Accessories and Service Items
PN # Warehouse Product Finish List $
 SNB Sex Nuts  
  Strike – RIM  
  Strike – RIM (Fire-rated & NON)  
 E Strike – SVR  
 ETR – Top Rod Extension Kit ( or  series, for doors ’ to ')  
 ETR – Top Rod Extension Kit ( series, doors from ’" to ')  
 GK (for  series wide stile only)  
 GK (for  series only)  
 Popper (for fire rated LB vert. rod) N/A 
 EDRKIT (Dogging repair kit) (for  series only) N/A 
 EDRKIT (Dogging repair kit) (for  or  series only) N/A 
 EGALD (Alum. door bracket & screws) (for  series only) N/A 
 EBPA-KIT (for  series wide stile only, size B)  
 ECD-KIT (for  series wide stile only, size B)  
, lb Magnetic Locks
PN # Warehouse Product Description Finish List $
 EEML BA DP  Magnetic lock, single door,  lb holding  
Electronic Access Control Components
Power Supplies and Accessories
PN # Warehouse Product Description Dual Voltage List $
 EPSRF . A @  VDC filter/reg, class  selectable
output, fire panel interface standard
 or  VDC 
Electric Strikes
PN # Warehouse Product Description Dual Voltage Finish List $
 EESF FSV  Electric strike, fire rated, surface rim  or  VDC  
 EESF FSV  Electric strike, fire rated, modular
mortise/cylindrical
 or  VDC  
Select Service Quick Ship Program
S
Architectural Hardware Price List #28
Power Door Operator
ED
PN # Warehouse Product Arm Finish List $
 ED J  ,
 ED T  ,
 RFR  Receiver 
 WS Wall Switch — 
 WSRFT   SQ Wall Switch, -/" Square 
Low Energy Operator
Select Service Quick Ship Program
S Architectural Hardware Price List #28
Surface Door Closers
TS Series
PN # Warehouse Product Arm Cover Fastener Finish List $
 TS (Cam & roller technology) T FMC SN  
 TS (Cam & roller technology) PT FMC SN  
 TS (Cam & roller technology) ST FMC SN  
Surface Door Closers
 Series
PN # Warehouse Body Arm Cover Fastener Finish List $
  AFP FC SN  
 E AFP FMC SN  
  SPA FC SN  
  DS FC SN  
 E DST FC SN  
  SDS FC SN  
  SDST FC SN  
 Series
PN # Warehouse Body Arm Cover Fastener Finish List $
  AFP COV SNB  
 E AFP FC SNB  
  ARP COV SNB  
 E ARP FC SNB  
  FHP COV SNB  
  DS COV SNB  
  DST COV SNB  
 Series
PN # Warehouse Body Arm Fastener Finish List $
  ARP COMBO  
  ARP COMBO  
  ARP SNB  
  ARP SNB  
Select Service Quick Ship Program
S
Architectural Hardware Price List #28
Surface Door Closers
Surface Closer Accessories and Service Items
PN # Product Finish List $
Arms
 AFP  
 AF  
 EARP  
 AR  
 FHP  
Backplates
 BPC  
 EBP  
 BP  
Covers
 COV  
 FC  
Drop Plates
 DP  
 DP  
 EDPFC  
 DP  
Miscellaneous
 BSHD  
 P  
 DPK  
 DPK  
 SN  
 SNB  
Select Service Quick Ship Program
S Architectural Hardware Price List #28
Electromagnetic Door Holders Concealed Door Closers
EM Series
PN # Warehouse Package Finish List $
 EM  
 EM  
EM Accessories and Service Items
PN # Warehouse Product Finish List $
 ER. (-/" extension rod)  
 ER. (" extension rod)  
Electromagnetic Door Holders
Concealed Door Closers
ITS Series
PN # Warehouse Body Description NHO/HO Finish List $
 ITS — NHO  
 THKIT (ITS HO Kit) 
RTS Series
PN # Warehouse Package Spring Stop NHO/HO Extension List $
 RTS SZ ° NHO  mm 
 RTS SZ ° HO  mm 3
 RTS SZ ° NHO  mm 
 RTS SZ ° HO  mm 
 RTS BFI ° NHO  mm 
 RTS BFI ° HO  mm 
 RTS BFE ° NHO  mm 
 RTS BFE ° HO  mm 
 RTS SZ ° NHO — 
 RTS SZ ° HO 
 RTS SZ ° NHO — 
 RTS BFE ° NHO 
 RTS BFI ° NHO 
NOTE: RTS Body only prices above (include mounting brackets)
Select Service Quick Ship Program
S
Architectural Hardware Price List #28
Concealed Door Closers
RTS Accessories and Service Items
PN # Warehouse Model Description Finish List $
 CRNR BRKT Header to side Jamb " web — 
  End load arm " web 
  End load arm /" web 
  End load arm /" web 
  End load arm /" web 
  Offset arm 
  Short floor pivot — 
  Tall floor pivot — 
  Short threshold pivot — 
  Steel frame mounting channel 
 J Conversion bracket, Jackson to RTS (use with standard RTS CRNR BRKT) 
BTS Series
PN # Warehouse Package Spring Top Pivot Bottom Pivot Cover Hand Spindle HO/HNO Finish List $
 BTSB Sz     HO/NHO  ,
Select Service Quick Ship Program
S Architectural Hardware Price List #28
Concealed Door Closers Pivots
Pivots
LM Series Pivot Sets and Pivot Hardware
PN # Warehouse Package Finish List $
 CP / 
 OP RH  
 OP LH  
LM Pivot Accessories and Service Items
PN # Warehouse Product Finish List $
  RH (/" offset intermediate)  
  LH (/" offset intermediate)  
BTS Accessories and Service Items
PN # Warehouse Product Hand Finish List $
 BTS Sz.  (no finish) ,
 BTS Sz.  (no finish) ,
 BTS Sz.  (no finish) ,
 BTSV NHO - (no finish) 
 BTSV BF NHO - (no finish) 
 BTSV  HO - (no finish) ,
  (Spindle insert) (no finish) 
  (Spindle insert) (no finish) 
  (Spindle insert) (no finish) 
  (Spindle insert) (no finish) 
  (Spindle insert) (no finish) 
  (Spindle insert) (no finish) 
  (Spindle insert) (no finish) 
  (° Spindle insert) LH (no finish) 
  (° Spindle insert) RH (no finish) 
  (BTS cover plate)  
  (BTS cover plate)  
  (BTSV cover plate)  
  (BTSV cover plate)  
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Locks
How to Determine Hand of Door How to Determine Handed Levers
RH
RIGHT HAND
LH
LEFT HAND
RHR
RIGHT HAND REVERSE
LHR
LEFT HAND REVERSE
INSIDE
OUTSIDE
INSIDE
OUTSIDE
LEFT HAND LEVER
RIGHT HAND LEVER
M Lock GR Mortise Lock
T Lock GR Decorative Tubular
Lock (M Trim) N/A N/A N/A
D Dead Bolt GR Small Case Mortise
Dead Bolt
C Lever Lock GR Cylindrical Lever Lock
C Knob Lock GR Cylindrical Knob Lock
D Dead Bolt GR Tubular Dead Bolt
CL Lever Lock GR Cylindrical Lever Lock
CK Knob Lock GR Cylindrical Knob Lock
DB Dead Bolt GR Tubular Dead Bolt
C Lever Lock GR Cylindrical Lever Lock
C Lever Lock GR Cylindrical Lever Lock
J300 Interconnected
Lock GR2 Interconnected Lock
Product Guide
ANSI
BHMA
Fire Rated
Standard
Cylinder
SFIC
Schlage
Style LFIC
Description
Yes
No
Optional
Locks
1
Architectural Hardware Price List #28
Handing Product Guide
2Architectural Hardware Price List #28
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
M9000 Series
Ordering Guide
R
Schlage LFIC (Less Core)
630
M9953
Product
Family
DLR A
Function2
626RH 134
A
B
H
M
Rose/Escutcheon
Design
605 PVD
606 PVD
612 PVD
613 PVD
625
626
— Satin Stainless
— Satin Chrome
— Bright Chrome
— Satin Black
— Satin Nickel
— Dark Oxidized Satin Bronze
— Satin Bronze
— Satin Brass
— Bright Brass
2-1/4"
Dia. Rose
2-9/16" Dia.
Rose
2-1/8" x 8-9/16"
Escutcheon
2-1/2" x 8"
Escutcheon
Finish
LHR
LH
RHR
RH — Right Hand
— Right Hand Reverse
— Left Hand
— Left Hand Reverse
Door Hand
5006 114
Door Thickness7
Strike Options8
Lip Length8
XXXX
Heav
y Duty Grade 1
Mortise Lockset
D
L
C
J
T
Cylinder Type
Temporary SFIC
SFIC (Less Core)
Less Cylinder
SFIC (With Core)
Conventional
Cylinder
Schlage LFIC
Temporary Schlage LFIC
1. Indicator cannot be added to M9071 function. For intruder function with indicator, order M9072.
2. Additional functions available. Detailed function descriptions available in M9000 Series brochure.
3. KB knob priced same as Premium lever.
4. D Rose not available in 625 or 626.
5. Available in 626 and 630 finishes only. Not available on 630 H escutcheon.
6. Security Screws only available with 619, 625, 626 and 630 finishes.
7. Standard door thickness is 1-3/4" (44 mm). Requirements for doors 1-13/16"
(46 mm) and thicker can vary by trim and function. See page 14
8. Example shows default values. Refer to Configuration Options section for full details.
001
Dummy Trim One Side
002
Dummy Trim Two Sides
968
973
986
Electrically Unlocked/Locked
w/Double Locking
Institution (F30)
Electrically Unlocked/Locked —
Storeroom (F07) —
Classroom (F05)
Apartment (F09) —
980
Storeroom
w/DB Single Cylinder
AM
Antimicrobial Coating5
TX
Security Screws6
Privacy w/DB & Indicator —
Classroom Intruder w/DB —
Dormitory w/DB (F21) —
Intruder Dead Bolt (F33) —
Intruder Dead Bolt (F34)
Storeroom w/DB (F14) —
996
Privacy w/DB (F19) —
974
080EU/EL
953
070
080
072
956
957
060
958
082
082EU/EL
071
940
619 PVD
622 PVD
Lever
Lever
Lever Design
Lever
Lever
Lever
Lever
LR
LC
LT
Knob — KB
LG
LD
LN
Faculty Restroom/Hotel
w/DB & Indicator
G
F
025
010
050
040
042
053
046
967
966
D2-9/16" Dia.
Decorative Rose
Premium
LeverPREMIUM
Ke
ying Options Field
Classroom Intruder Latch
Bolt with Indicator
Classroom
Intruder Latch Bolt (F32)
Privacy, Bedroom or
Bath (F22)
Exit/Communicating
Passage (F31)
Storeroom w/DB (F35) —
Dormitory w/DB (F11) —
Corridor w/DB (F13) —
Entry w/DB (F20) —
Office/Entry (Alt F04)
Office/Entry (F04)
Privacy w/Indicator —
Passage/Closet (F01) —
Privacy w/Coin Turn —
Locks
3
Architectural Hardware Price List #28
M9000 Series
Trim Options
Locks
4Architectural Hardware Price List #28
M9000 Series
2-1/4
(57)
2-5/8
(67)
5
(127)
L
2-1/4
(57)
3
(76)
4-1/2
(114)
L
2-1/4
(57)
2-9/16
(65)
4-7/8
(124)
LA
2-1/4
(57)
2-11/16
(69)
4-3/8
(111)
LG
2-1/4
(57)
2-1/2
(54)
4-13/16
(122)
LF
2-1/4
(57)
2-3/4
(70)
5
(127)
LV
2-1/4
(57)
2-5/8
(67)
4-5/8
(117)
L
Lever Options — Premium
Lever Options — Standard
2-1/4
(57)
2-3/4
(70)
4-3/8
(111)
LC
2-1/4
(57)
2-1/4
(57)
4-11/16
(119)
LR
2-1/4
(57)
2-7/ 16
(61)
4-11/16
(120)
LD
2-1/4
(57)
2-1/8
(54)
4-1/4
(108)
LN
2-1/4
(57)
2-1/2
(64)
4-1/4
(108)
LT
2-1/4
(57)
2-5/8
(67)
5-5/8
(143)
L
2-1/4
(57)
2-5/8
(67)
4-1/2
(114)
L
2-1/4
(57)
2-5/8
(67)
2-3/16
(56)
KB
2-1/4
(57)
2-7/8
(73)
5
(127)
L
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
2-1/8
(54)
3/8
(10)
8-9/16
(218)
2-1/2
(64)
8
(203)
1/4
(6)
A Rose H — Cast or Forged M — Wrought
Wrought Roses Escutcheons
Trim Styles
All Finishes
2-9/
16
(65)
7/16
(11)
D Rose
2-9/
16
(65)
7/16
(11)
B Rose
2-1/4
(57)
7/16
(11)
Standard levers
with Rose trim
Premium levers
with Rose trim
Standard levers with
Escutcheon trim
Premium levers with
Escutcheon trim
NOTE: See next  pages for mortise lock pricing
arranged by Trim Style.
Finish Availability Chart
        
Standard Levers
LR
LC
LG
LF
LT
LV
L
Premium Levers
LA
LD
LN
L
L
L
L
L
Knob
KB
Locks
5
Architectural Hardware Price List #28
M9000 Series
A,B,D Rose

, ,
, ,
, ,
, 
ANSI # Function Description List $
Non-Keyed
M (w/ out lock case) Single dummy  
M (w/ out lock case) Double dummy  
M (w/ lock case) Single dummy  
M (w/ lock case) Double dummy  
F M Passage/closet  
F M Exit/communicating passage  
F M Privacy, bedroom or bath  
— M Privacy w/ coin turn  
— M Privacy w/ indicator  
F M Privacy w/ dead bolt  
M Privacy w/ dead bolt and coin turn  
Keyed, Single Cylinder
F04 M9050 Office/Entry 746 818
F04 M9053 Office/Entry 746 818
M9056 Office/Entry w/ automatic unlocking 813 888
F05 M9070 Classroom 746 818
F06 M9076 Holdback 746 818
F07 M9080 Storeroom 746 818
M9080EL Electrically locked (Fail Safe; 24 V) 1,126 1,159
M9080EU Electrically unlocked (Fail Secure; 24 V) 1,126 1,159
F20 M9953 Entry w/ dead bolt 769 843
M9954 Security entrance w/ dead bolt 769 843
F13 M9956 Corridor w/ dead bolt 769 843
F12 M9959 Dormitory/Exit w/ dead bolt 769 843
F21 M9973 Dormitory w/ dead bolt 769 843
M9980 Storeroom w/ dead bolt 769 843
F15 M9985 Faculty restroom/hotel w/ dead bolt 813 888
M9986 Faculty restroom/hotel w/ dead bolt/indicator 876 957
M9996 Privacy w/ dead bolt/indicator 876 957
Keyed, Double Cylinder
F09 M9060 Apartment 818 896
F32 M9071 Intruder latch bolt 818 896
M9072 Intruder latch bolt with indicator 891 969
M9077 Holdback double cylinder 818 896
F30 M9082 Institution lock 818 896
M9082EL Electrically locked (Fail Safe) w/ double locking (24 V) 1,189 1,222
M9082EU Electrically unlocked (Fail Secure) w/ double locking (24 V) 1,189 1,222
F11 M9957 Dormitory w/ dead bolt 861 896
F35 M9958 Storeroom w/ dead bolt 861 896
F14 M9966 Storeroom w/ dead bolt 861 896
F34 M9967 Intruder w/ dead bolt 861 896
M9974 Classroom intruder w/ dead bolt 861 896
Deadbolt Only
F17 M9960 Deadbolt Only — Cylinder × Turn (No Trim) 387 404
F18 M9961 Deadbolt Only — Cylinder × Blank (No Trim) 318 337
F16 M9962 Deadbolt Only — Cylinder × Cylinder (No Trim) 468 486
F29 M9963 Deadbolt Only — Classroom (No Trim) 468 486
Standard Lever – Rose Styles
Levers: LR, LC, LF, LG, LT, LV, L118
Roses: A, B, D
L not available in , , or  finish.
LF and LV not available in  finish.
See Lever Finish Availability Chart, page .
D rose not available in  or  finish.
NOTES:
1. Available with Request to Exit (RX), Latch Monitoring (LM) or both
2. Available with Latch Monitoring (LM) only
3. Available with Request to Exit (RX) or Latch Monitoring
See page 13 for RX and LM Pricing
Locks
6Architectural Hardware Price List #28
M9000 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Standard Lever – Escutcheon Styles
Levers: LR, LC, LF, LG, LT, LV, L118
Escutcheons: H, M H Escutcheon M Escutcheon

, ,
, ,
, ,
, 
,

, ,
, ,
, ,

ANSI # Function Description List $
Non-Keyed
M (w/ out lock case) Single dummy    
M (w/ out lock case) Double dummy    
M (w/ lock case) Single dummy    
M (w/ lock case) Double dummy    
F M Passage/closet    
F M Exit/communicating passage NA NA  
F M Privacy, bedroom or bath    
— M Privacy w/ coin turn    
— M Privacy w/ indicator NA NA NA NA
F M Privacy w/ dead bolt    
M Privacy w/ dead bolt and coin turn    
Keyed, Single Cylinder
F M Office/Entry    
F M Office/Entry    
M Office/Entry w/ automatic unlocking    
F M Classroom    
F M Holdback    
F M Storeroom    
MEL Electrically locked (Fail Safe;  V) , , , ,
MEU Electrically unlocked (Fail Secure;  V) , , , ,
F M Entry w/ dead bolt    
M Security entrance w/ dead bolt    
F M Corridor w/ dead bolt    
F M Dormitory/Exit w/ dead bolt    
F M Dormitory w/ dead bolt    
M Storeroom w/ dead bolt    
F M Faculty restroom/hotel w/ dead bolt    
M Faculty restroom/hotel w/ dead bolt/indicator NA NA NA NA
M Privacy w/ dead bolt/indicator NA NA NA NA
Keyed, Double Cylinder
F M Apartment    
F M Intruder latch bolt    
M Holdback double cylinder    
F M Institution lock    
MEL Electrically locked (Fail Safe) w/ double locking ( V) , , , ,
MEU Electrically unlocked (Fail Secure) w/ double locking ( V) , , , ,
F M Dormitory w/ dead bolt    
F M Storeroom w/ dead bolt    
F M Storeroom w/ dead bolt    
F M Intruder w/ dead bolt    
M Classroom intruder w/ dead bolt    
Deadbolt Only
F M Deadbolt Only — Cylinder × Turn (No Trim)  
F M Deadbolt Only — Cylinder × Blank (No Trim)  
F M Deadbolt Only — Cylinder × Cylinder (No Trim)  
F M Deadbolt Only — Classroom (No Trim)  
L not available in , , or  finish.
LF and LV not available in  finish.
See Lever Finish Availability Chart, page .
NOTES:
1. Available with Request to Exit (RX), Latch Monitoring (LM) or both
2. Available with Latch Monitoring (LM) only
3. Available with Request to Exit (RX) or Latch Monitoring
See page 13 for RX and LM Pricing
Locks
7
Architectural Hardware Price List #28
M9000 Series
A, B, D Rose
626
605, 606,
612, 613, 619,
622, 625,
630
ANSI # Function Description List $
Non-Keyed
M9001 (w/ out lock case) Single dummy 220 252
M9002 (w/ out lock case) Double dummy 470 504
M9003 (w/ lock case) Single dummy 343 363
M9004 (w/ lock case) Double dummy 568 605
F01 M9010 Passage/closet 612 678
F31 M9025 Exit/communicating passage 702 774
F22 M9040 Privacy, bedroom or bath 702 774
— M9042 Privacy w/ coin turn 748 827
— M9046 Privacy w/ indicator 844 880
F19 M9940 Privacy w/ dead bolt 844 880
M9942 Privacy w/ dead bolt and coin turn 895 929
Keyed, Single Cylinder
F04 M9050 Office/Entry 779 854
F04 M9053 Office/Entry 779 854
M9056 Office/Entry w/ automatic unlocking 848 927
F05 M9070 Classroom 779 854
F06 M9076 Holdback 779 854
F07 M9080 Storeroom 779 854
M9080EL Electrically locked (Fail Safe; 24 V) 1,170 1,204
M9080EU Electrically unlocked (Fail Secure; 24 V) 1,170 1,204
F20 M9953 Entry w/ dead bolt 801 879
M9954 Security entrance w/ dead bolt 801 879
F13 M9956 Corridor w/ dead bolt 801 879
F12 M9959 Dormitory/Exit w/ dead bolt 801 879
F21 M9973 Dormitory w/ dead bolt 801 879
M9980 Storeroom w/ dead bolt 801 879
F15 M9985 Faculty restroom/hotel w/ dead bolt 848 927
M9986 Faculty restroom/hotel w/ dead bolt/indicator 912 998
M9996 Privacy w/ dead bolt/indicator 912 998
Keyed, Double Cylinder
F09 M9060 Apartment 854 933
F32 M9071 Intruder latch bolt 854 933
M9072 Intruder latch bolt with indicator 927 1,007
M9077 Holdback double cylinder 854 933
F30 M9082 Institution lock 854 933
M9082EL Electrically locked (Fail Safe) w/ double locking (24 V) 1,235 1,270
M9082EU Electrically unlocked (Fail Secure) w/ double locking (24 V) 1,235 1,270
F11 M9957 Dormitory w/ dead bolt 899 933
F35 M9958 Storeroom w/ dead bolt 899 933
F14 M9966 Storeroom w/ dead bolt 899 933
F34 M9967 Intruder w/ dead bolt 899 933
M9974 Classroom intruder w/ dead bolt 899 933
Deadbolt Only
F17 M9960 Deadbolt Only — Cylinder × Turn (No Trim) 387 404
F18 M9961 Deadbolt Only — Cylinder × Blank (No Trim) 318 337
F16 M9962 Deadbolt Only — Cylinder × Cylinder (No Trim) 468 486
F29 M9963 Deadbolt Only — Classroom (No Trim) 468 486
Premium Lever – Rose Styles
Levers: LA, LD, LN, L109, L110, L112, L114, L117, KB
Roses: A, B, D
L, L, and L not available in  or  finishes.
LD, LN, and L not available in  finish.
See Lever Finish Availability Chart, page .
D rose not available in  or  finish.
NOTES:
1. Available with Request to Exit (RX), Latch Monitoring (LM) or both
2. Available with Latch Monitoring (LM) only
3. Available with Request to Exit (RX) or Latch Monitoring
See page 13 for RX and LM Pricing
Locks
8Architectural Hardware Price List #28
M9000 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
H Escutcheon M Escutcheon
626
605, 606,
612, 613,
619, 622,
625, 630
626,
630
605, 606,
612, 613,
619, 622,
625
ANSI # Function Description List $
Non-Keyed
M9001 (w/ out lock case) Single dummy 272 292 227 257
M9002 (w/ out lock case) Double dummy 510 542 481 517
M9003 (w/ lock case) Single dummy 381 400 350 375
M9004 (w/ lock case) Double dummy 609 576 580 615
F01 M Passage/closet 682 719 624 691
F31 M Exit/communicating passage 713 785
F22 M9040 Privacy, bedroom or bath 780 815 713 785
— M9042 Privacy w/ coin turn 826 862 760 835
— M9046 Privacy w/ indicator — —
F19 M9940 Privacy w/ dead bolt 884 916 856 891
M9942 Privacy w/ dead bolt and coin turn 933 968 905 940
Keyed, Single Cylinder
F04 M9050 Office/Entry 857 894 790 866
F04 M Office/Entry 857 894 790 866
M Office/Entry w/ automatic unlocking 897 931 859 938
F05 M Classroom 857 894 790 866
F06 M Holdback 857 894 790 866
F07 M Storeroom 857 894 790 866
MEL Electrically locked (Fail Safe; 24 V) 1,212 1,248 1,181 1,217
MEU Electrically unlocked (Fail Secure; 24 V) 1,212 1,248 1,181 1,217
F20 M Entry w/ dead bolt 883 918 815 891
M Security entrance w/ dead bolt 883 918 815 891
F13 M Corridor w/ dead bolt 883 918 815 891
F12 M Dormitory/Exit w/ dead bolt 883 918 815 891
F21 M Dormitory w/ dead bolt 883 918 815 891
M Storeroom w/ dead bolt 883 918 815 891
F15 M Faculty restroom/hotel w/ dead bolt 918 953 859 938
M Faculty restroom/hotel w/ dead bolt/indicator
M Privacy w/ dead bolt/indicator
Keyed, Double Cylinder
F09 M9060 Apartment 947 983 866 945
F M Intruder latch bolt 947 983 866 945
M Holdback double cylinder 947 983 866 945
F M Institution lock 947 983 866 945
MEL Electrically locked (Fail Safe) w/ double locking ( V) 1,179 1,320 1,247 1,280
MEU Electrically unlocked (Fail Secure) w/ double locking ( V) 1,179 1,320 1,247 1,280
F11 M9957 Dormitory w/ dead bolt 947 983 909 945
F35 M9958 Storeroom w/ dead bolt 947 983 909 945
F14 M9966 Storeroom w/ dead bolt 947 983 909 945
F34 M9967 Intruder w/ dead bolt 947 983 909 945
M9974 Classroom intruder w/dead bolt 947 983 909 945
Deadbolt Only
F17 M9960 Deadbolt Only — Cylinder × Turn (No Trim) 387 404 —
F18 M9961 Deadbolt Only — Cylinder × Blank (No Trim) 318 337 — —
F16 M9962 Deadbolt Only — Cylinder × Cylinder (No Trim) 468 486
F29 M9963 Deadbolt Only — Classroom (No Trim) 468 486
Premium Lever – Escutcheon Styles
Levers:
LA, LD, LN, L109, L110, L112, L114, L117, KB
Escutcheons: H, M
L, L, and L not available in  or  finishes.
LD, LN, and L not available in  finish.
See Lever Finish Availability Chart, page .
NOTES:
1. Available with Request to Exit (RX), Latch Monitoring (LM) or both
2. Available with Latch Monitoring (LM) only
3. Available with Request to Exit (RX) or Latch Monitoring
See page 13 for RX and LM Pricing
Locks
9
Architectural Hardware Price List #28
M9000 Series
Cylinder Types, Keying Options, and Keyways
NOTES:
M9985D and M9986D are available MKD, CMK, or 1-bit only.
Emergency keys for M9985D and M9986D are 45101 or 45401.
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate cylinder. SC and SE keyways only.
Cut Keys Ordered Separately
Part # Description List $
 SFIC Change key, master key, construction master key, or control key;
BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFIC Change key, master key, or control key; SKC sections — D etc. 
 SFIC Emergency key for MC or MC; BA section 
 SFIC Emergency key for MC or MC; SKC sections — D etc. 
 CONV/ LFIC -bit cut key for operating -bit cylinders — SC, SE keyways
 LFIC — Cut key — -bit cut control key (to install/remove “-bit” LFIC cores) — SC keyway
SC CONV/LFIC — Key blank — SC keyway .
SC LFIC — Key blank, Control key (to install / remove LFIC Cores) — SC keyway
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder Example: MD N/C
KD Keyed differently to a random combination; SC keyway with  keys
(default)
N/C
KA Keyed alike in pairs to a random combination; SC keyway with  keys N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key
blanks (order -bit key separately)
N/C
-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately N/C
-Bit Operated by -bit cut key for easy rekeying; AA, CA, CB, CC, CD, CE, RA,
RB, GA, SF, YA, YG keyways with  key blanks

NSK Keyed alike, sets of three or more; SC keyway with  keys 
MKD Master keyed or SKD, SC, SE, or D keyway — Keys sold separately 
NS Non-stock keyed double cylinder locks; SC keyway with  keys 
MK Master keyed or SKD double cylinder lock; SC, SE, or D keyway Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
CM Construction master keyed double cylinder locks — Keys sold separately 
LLock less conventional cylinder and collar Example: ML Deduct 
Interchangeable Core Cylinders
TSFIC — Housing with keyed temporary SFIC construction core
(Core may be returned for a full refund) — Keys sold separately
Example: MT 
JSFIC — Housing with disposable plastic SFIC plug Example: MJ N/C
CSFIC — Housing with combinated SFIC core installed at the
factory; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ,
BK, BL, BM, BQ, D keyway Keys sold separately
Example: MC 
GSchlage LFIC — Housing with keyed temporary Schlage LFIC construction
core (Core may be returned for full refund) — Keys sold separately
Example: MG 
RSchlage LFIC — Housing less core Example: MR
FSchlage LFIC — Housing with combinated Schlage LFIC installed at the
factory (SC keyway) Keys sold separately
Example: MF 
. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys & Keying.
Locks will be supplied w/plastic construction core, Option J.
Denotes keys must be ordered separately.
Locks
10 Architectural Hardware Price List #28
M9000 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Description: Grade  Mortise Locks Less Components (Use LRA trim design and specified finish for base list price.) List Deduct $
Less outside lever and rose
Example: MD LLL × LRA  RH   ; includes mortise less trim kit 
Deduct 
Less inside lever and rose
Example: MD LRA × LLL  RH   ; includes mortise less trim kit 
Deduct 
Less strike
Example: MD LRA  RH  LLL
Deduct 
NOTES:
For other configurations, consult factory.
Mortise locks not available less trim both sides.
Part # Description List Add $
 — ANSI Strike for Mortise Lock (*see below for usage)
- -/" × -/", -/" lip length, square corner, curved lip N/C
- -/" × -/", /" lip length, square corner, straight lip 
- -/" × -/", -/" lip length, square corner, curved lip 
- -/" × -/", -/" lip length, square corner, curved lip 
- -/" × -/", " lip length, square corner, curved lip 
- -/” × -/”, -/” lip length, square corner, curved lip 
Strikes
Part # Description List Add $
 — ANSI Strike for Mortise Lock (*see below for usage)
- -/" × -/", -/" lip length, square corner (specify hand) 
* Optional handed strike available for M functions without dead bolts. Only available in -/" lip length. Specify hand.
Description of Components Coated List Add $
Available on  and  finishes only. Not available with  H escutcheon.
Specify AM. Example: AM or AM
Rose Trim
A, B, or D
Inside: lever, rose, and thumbturn
Outside: Lever and rose

Escutcheon
Trim H* or M
Inside: lever, escutcheon, and thumbturn
Outside: Lever and escutcheon

NOTES:
Extended leadtime, consult factory.
*AM option on  H escutcheon, consult factory.
Configuration Options
* Default length strike shown in bold for all M9000 functions. Lip length is distance from center of mounting holes to edge of strike.
Antimicrobial Coating
Locks
11
Architectural Hardware Price List #28
M9000 Series
Special Application Options
Lead Lined Lock Case
Part # Description List Add $
 Lead lining plate for M Series Mortise Locks 
NOTES:
1-3/4"–2-1/8" thick doors.
Specify finish. Example: 79019 626.
Indicators will work on the following functions but may have unexpected operation on lock sets that remain locked when the dead bolt is retracted:
M9046, 9056, 9940, 9942, 9953, 9956, 9957, 9959, 9960, 9961, 9962, 9966, 9967, 9968, 9973, 9974, 9980, 9985, 9986, 9996
Part # Description List Add $
 Occupancy indicator for rose trim used w/cylinder, reading OCCUPIED/VACANT or
SECURED/UNSECURED. Both readings supplied. Specify finish.

Optional RG — Solid red/green indicator insert, Specify "  RG"
 Occupancy indicator for rose trim used without cylinder, emergency access, reading
OCCUPIED/VACANT. Specify finish.

 Occupancy indicator for rose trim used without cylinder, reading SECURED/UNSECURED.
No emergency access. Used on inside of door with on outside.

 Occupancy indicator w/cointurn for rose trim used without cylinder, reading
OCCUPIED/VACANT. Specify finish.

Occupancy Indicators
NOTE: Tactile marking is applied to outside knob or lever only, unless otherwise specified. Prices shown per single lever or knob.
Part # Description List Add $
 Knurled or grooved lever (LR, LT, and LG designs only) 
 Abrasive coated lever or knob (all designs) 
Tactile Markings
Locks
12 Architectural Hardware Price List #28
M9000 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
, ,
, , 
,

Part # Description List Add $
-XXX -/" × -/", special lip length (greater than -/"). Specify lip length.  
Security Screws
Specify Description List Add $
TX A/B/D Security screws for all exposed fasteners (sectional trim and dead bolts only). 
TX H Security screws for all exposed fasteners (H escutcheon only). 
TX M Security screws for all exposed fasteners (M escutcheon only). 
NOTE: Only available for use with , , , and  finish locksets.
Example: -  for a -/" lip length strike in  finish.
NOTE: Non-standard items are considered to be special request items and have an extended lead time. Consult factory for more information.
Request to Exit/Latch Monitoring
Suffix Description List Add $
RX Request to exit, M/ / /  / EU/ EL/ EU/ EL. Specify RX. Example: MRX. 
LM Latch Monitoring, M/ / / / / / / EL/
EU/ / EL/ EU. Specify LM. Example: MEULM.

RXLM Request to Exit & Latch Monitoring, M/ / / /
EL/ EU. Specify RXLM. Example: MRXLM.

Special Strikes (Non-Standard Lip Lengths)
Locks
13
Architectural Hardware Price List #28
M9000 Series
Non-Standard Door Thickness
Charges include special strike and cylinder requirements. Extended lead time may be required, check with factory.
For functions requiring an indicator, add $.
NOTES:
EE — Door thickness extended equally (lock is centered)
EI — Door thickness extended inside only
EO — Door thickness extended outside only
ED — Door thickness extended differently inside and outside
Required Information — For Non-Standard Door Thickness
Special Requests:
Customized products may be available to solve unusual functions or applications.
Contact Technical Services for assistance.
Description Type List Add $
Functions without a Cylinder
Doors >-/" to -/"
Doors >-/” to ”
EE, EI, EO, ED
EE, EI, EO, ED
N/C

Single Cylinder Functions
Doors >-/" to -/"
Doors >-/” to ”
Doors >-/” to ”
EE, EI, EO, ED
EI
EE, EO, ED
N/C


Double Cylinder Functions
Doors >-/” to -/”
Doors >-/” to ”
Doors >-/” to ”
EE, EI, EO, ED
EI
EE, EO, ED
N/C


B
A
C
OUTSIDE
SPECIFY:
• Overall Door Thickness (A)
• Lock Center to OUTSIDE of Door (B)
• Strike Center to Edge of Frame (C)
LOCK
CENTERLINE
DOOR EDGE
B
A
C
OUTSIDE
SPECIFY:
• Overall Door Thickness (A)
• Lock Center to OUTSIDE of Door (B)
• Strike Center to Edge of Frame (C)
LOCK
CENTERLINE
DOOR EDGE
Locks
14 Architectural Hardware Price List #28
M9000 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
605 PVD
606 PVD
612 PVD
613 PVD
625
622 PVD
626
Satin Stainless
Satin Chrome
Bright Chrome
Satin Black
Satin Nickel
Satin Bronze
Satin Brass
Bright Brass
630 134
619 PVD
Strike Options
Door Thickness
D960 RH
Product
Family
626134 5301 XXXX
Grade 1 Small Case
Mortise Dead Bolt C
L
J
T
Cylinder Type
Handing
(D963 only)
Temporary SFIC
SFIC (Less Core)
Antimicrobial
Coating Security Screws
Conventional Cylinder
Temporary Schlage LFIC
Schlage LFIC (Less Core)
Schlage LFIC
SFIC
Less Cylinder
60
Cylinder × Turn
1-3/4"
2-1/4"
61
AM TX
Cylinder × Blank
Function
63
62
71
Turn Only —
Indicator × Turn —
Cylinder × Classroom —
81
Keying Options Field
Cylinder × Cylinder —
D
G
F
R
LH
RH
Right Hand/
Right Hand Reverse
Left Hand/
Left Hand Reverse
Dark Oxidized
Satin Bronze
D
Finish
*
D900 Series
Ordering Guide
, ,

, ,
, ,
, 
ANSI # Function Description List $
E D Cylinder × Turn  
E D Cylinder × Cylinder  
E D Cylinder × Classroom  
E D Cylinder × Blank  
D Cylinder Indicator × Turn  
E D Turn Only  
* D function available in , , , and  finish only.
Locks
15
Architectural Hardware Price List #28
D900 Series
Cylinder Types, Keying Options, and Keyways
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder Example: DD N/C
KD Keyed differently to a random combination; SC keyway with  keys
(default)
N/C
KA Keyed alike in pairs to a random combination; SC keyway with  keys N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key
blanks (order -bit key separately)
N/C
-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately N/C
-Bit Operated by -bit cut key for easy rekeying; AA, CA, CB, CC, CD, CE, RA,
RB, GA, SF, YA, YG keyways with  key blanks

NSK Keyed alike, sets of three or more; SC keyway with  keys 
MKD Master keyed or SKD, SC, SE, or D keyway — Keys sold separately 
NS Non-stock keyed double cylinder locks; SC keyway with  keys 
MK Master keyed or SKD double cylinder lock; SC, SE, or D keyway Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
CM Construction master keyed double cylinder locks — Keys sold separately 
LLock less conventional cylinder and collar Example: DL Deduct 
Interchangeable Core Cylinders
TSFIC — Housing with keyed temporary SFIC construction core
(Core may be returned for a full refund) — Keys sold separately
Example: DT 
JSFIC — Housing with disposable plastic SFIC plug Example: DJ N/C
CSFIC — Housing with combinated SFIC core installed at the
factory; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ,
BK, BL, BM, BQ, D keyway Keys sold separately
Example: DC 
GSchlage LFIC — Housing with keyed temporary Schlage LFIC construction
core (Core may be returned for full refund) — Keys sold separately
Example: DG 
RSchlage LFIC — Housing less core Example: DR
FSchlage LFIC — Housing with combinated Schlage LFIC installed at the
factory (SC keyway) Keys sold separately
Example: DF 
. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys & Keying.
Locks will be supplied w/plastic construction core, Option J.
Denotes keys must be ordered separately.
NOTES:
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1 bit cylinder comes with (2) uncut keys and will require a 1 bit cut key, sold separately, to operate cylinder. SC and SE keyways only.
Cut Keys Ordered Separately
Part # Description List $
 SFIC Change key, master key, construction master key, or control key;
BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFIC Change key, master key, or control key; SKC sections — D etc. 
 CONV/ LFIC -bit cut key for operating -bit cylinders — SC, SE keyways
 LFIC — Cut key — -bit cut control key (to install/remove “-bit” LFIC cores) — SC keyway
SC CONV/LFIC — Key blank — SC keyway .
SC LFIC — Key blank, Control key (to install / remove LFIC Cores) — SC keyway
Locks
16 Architectural Hardware Price List #28
D900 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Antimicrobial Coating
Description of Components Coated List $
Available on  and  finished. Specify AM. Example AM or AM.
Inside Thumb Turn and Rose if applicable to function 
Security Screws
Specify Description List $
TX Security Screws for Strike, Armor Plate, Thumb Turn 
D900 Accessories
NOTE: AM Coating not available on Cylinders (AM Coating not available on outside). Extended lead time required, consult factory.
NOTE: Only available for use with 619, 625, 626, and 630 finish locksets.
Locks
17
Architectural Hardware Price List #28
D900 Series
18 Architectural Hardware Price List #28
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
1. D rose not available in 625 or 626.
2. See Finish Availability chart, page 21.
3. For split nishes, consult factory. Specify in-swing or out-swing.
4. Available on 626/630 nishes only.
5. Fire rated latch available on T925 (standard) and T910 (optional). Not available on T940.
6. Example shows default values. Refer to Conguration Options section for full details.
7. Standard door thickness is 1-3/8"–1-3/4". Contact factory for other thicknesses.
T9 10
Product
Family
LR B
01
Privacy, Bedroom or Bath
Exit/Communicating Passage
Passage/Closet
Double Dummy
Single Dummy, Through-Bolted
Function
62690202134
D
Rose Design
2-9/16" Dia.
Decorative
Finish3
RH — Right Hand
— Left Hand
Door Hand
5101 118
Latch Bolt6
Door Thickness6,7
Strike Options6
Lip Length6
Grade 2
Tubular Lockset
40
10
25
AM
Antimicrobial Coating4
B
2-9/16" Dia.
134 — 1-3/8"–1-3/4"
02
612 PVD
613 PVD
— Satin Stainless
— Satin Chrome
— Bright Chrome
— Satin Black
— Satin Nickel
— Dark Oxidized Satin Bronze
— Satin Bronze
— Satin Brass
— Bright Brass
630
619 PVD
RH
LH
— Lever
— Lever, Handed
— Lever
— Lever
— Lever
— Lever
— Premium Lever
Lever Design2
LC
LD
LG
LN
LR
LT
PREMIUM
605 PVD
606 PVD
625
622 PVD
626
F
Fire-Rated5
1. D rose not available in 625 or 626.
2. See Finish Availability chart, page 21.
3. For split nishes, consult factory. Specify in-swing or out-swing.
4. Available on 626/630 nishes only.
5. Fire rated latch available on T925 (standard) and T910 (optional). Not available on T940.
6. Example shows default values. Refer to Conguration Options section for full details.
7. Standard door thickness is 1-3/8"–1-3/4". Contact factory for other thicknesses.
T9 10
Product
Family
LR B
01
Privacy, Bedroom or Bath
Exit/Communicating Passage
Passage/Closet
Double Dummy
Single Dummy, Through-Bolted
Function
62690202134
D
Rose Design
2-9/16" Dia.
Decorative
Finish3
RH — Right Hand
— Left Hand
Door Hand
5101 118
Latch Bolt6
Door Thickness6,7
Strike Options6
Lip Length6
Grade 2
Tubular Lockset
40
10
25
AM
Antimicrobial Coating4
B
2-9/16" Dia.
134 — 1-3/8"–1-3/4"
02
612 PVD
613 PVD
— Satin Stainless
— Satin Chrome
— Bright Chrome
— Satin Black
— Satin Nickel
— Dark Oxidized Satin Bronze
— Satin Bronze
— Satin Brass
— Bright Brass
630
619 PVD
RH
LH
— Lever
— Lever, Handed
— Lever
— Lever
— Lever
— Lever
— Premium Lever
Lever Design2
LC
LD
LG
LN
LR
LT
PREMIUM
605 PVD
606 PVD
625
622 PVD
626
F
Fire-Rated5
T900 Series
Ordering Guide
Locks
19
Architectural Hardware Price List #28
T900 Series
Trim Options
Lever Options
Locks
20 Architectural Hardware Price List #28
T900 Series
2-1/4
(57)
2-5/8
(67)
5
(127)
L
2-1/4
(57)
3
(76)
4-1/2
(114)
L
2-1/4
(57)
2-9/16
(65)
4-7/8
(124)
LA
2-1/4
(57)
2-11/16
(69)
4-3/8
(111)
LG
2-1/4
(57)
2-1/2
(54)
4-13/16
(122)
LF
2-1/4
(57)
2-3/4
(70)
5
(127)
LV
2-1/4
(57)
2-5/8
(67)
4-5/8
(117)
L
2-1/4
(57)
2-3/4
(70)
4-3/8
(111)
LC
2-1/4
(57)
2-1/4
(57)
4-11/16
(119)
LR
2-1/4
(57)
2-7/ 16
(61)
4-11/16
(120)
LD
2-1/4
(57)
2-1/8
(54)
4-1/4
(108)
LN
2-1/4
(57)
2-1/2
(64)
4-1/4
(108)
LT
2-1/4
(57)
2-5/8
(67)
5-5/8
(143)
L
2-1/4
(57)
2-5/8
(67)
4-1/2
(114)
L
2-1/4
(57)
2-5/8
(67)
2-3/16
(56)
KB
2-1/4
(57)
2-7/8
(73)
5
(127)
L
Premium
Standard
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Wrought Roses
2-9/
16
(65)
7/16
(11)
D Rose
2-9/
16
(65)
7/16
(11)
B Rose
Finish Availability Chart
        
Standard Levers
LR
LC
LG
LF
LT
LV
L
Premium Levers
LA
LD
LN
L
L
L
L
L
Knob
KB
Locks
21
Architectural Hardware Price List #28
T900 Series
626 605, 606, 612, 619,
622, 625, 613, 630
ANSI # Function Description List $
Keyless
T901 Single dummy, surface mounted 132 140
T902 Double dummy 183 195
F75 T910 Passage/closet 220 233
F111 T925 Exit/communicating 220 233
F76 T940 Privacy, bedroom or bath 234 248
 , , , ,
, , , 
ANSI # Function Description List $
Keyless
T901 Single dummy, surface mounted 145 152
T902 Double dummy 203 216
F75 T910 Passage/closet 243 256
F111 T925 Exit/communicating 243 256
F76 T940 Privacy, bedroom or bath 257 271
T900 Series
Standard Levers
Premium Levers
L not available in , , or  finish.
LF and LV not available in  finish.
See Lever Finish Availability Chart, page .
D rose not available in  or .
L, L, and L not available in  or  finishes.
LD, LN, and L not available in  finish.
See Lever Finish Availability Chart, page .
D rose not available in  or .
NOTE: Split finishes will be priced at the higher finish list price.
NOTE: Split finishes will be priced at the higher finish list price.
Locks
22 Architectural Hardware Price List #28
T900 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Non-Fire Latch Bolts
Part # Backset Description List Add $
91202 2-3/4" 1-1/8" faceplate, passage, square corner, 90 min fire-rated, T910/T925 12
91200 2-3/4" 1" faceplate, passage, square corner, 90 min fire-rated, T910/T925 12
91100 2-3/8" 1" faceplate, passage, square corner, 90 min fire-rated, T910/T925 12
91101 2-3/8" 1" faceplate, passage, 1/4" radius corner, 90 min fire-rated, T910/T925 12
Fire-Rated Latch Bolts
Part # Backset Description List Add $
90202 2-3/4" 1-1/8" faceplate, passage, square corner, non-fire, T910 only N/C
90232 2-3/4" 1-1/8" faceplate, privacy, square corner, non-fire, T940 only N/C
90200 2-3/4" 1" faceplate, passage, square corner, non-fire, T910 only N/C
90230 2-3/4" 1" faceplate, privacy, square corner, non-fire, T940 only N/C
90100 2-3/8" 1" faceplate, passage, square corner, non-fire, T910 only N/C
90130 2-3/8" 1" faceplate, privacy, square corner, non-fire, T940 only N/C
90101 2-3/8" 1" faceplate, passage, 1/4" radius corner, non-fire, T910 only N/C
90131 2-3/8" 1" faceplate, privacy, 1/4" radius corner, non-fire, T940 only N/C
NOTE: Default strike shown in bold.
Strikes
Part # Description List Add $
5101 — T Strike with Dust Box
5101-118 1-1/8" × 2-3/4", 1-1/8" lip length, square corner N/C
5101-112 1-1/8" × 2-3/4", 1-1/2" lip length, square corner 18
5102-118 1-1/8" × 2-3/4", 1-1/8" lip length, radius corner N/C
Part # Description List Add $
5201, 5202 — Full Lip Strike
5201-118 1-5/8" × 2-1/4", 1-1/8" lip length, square corner N/C
5202-118 1-5/8" × 2-1/4", 1-1/8" lip length, 1/4" radius corner N/C
Configuration Options
NOTE: List add for fire-rated latch with T only. Fire-rated latch standard for T – no list add. Not available on T.
Locks
23
Architectural Hardware Price List #28
T900 Series
Part # Description List Add $
 — ANSI Strike, includes Dust Box
- -/" × -/", -/ lip length, square corner N/C
- -/" × -/", -/ lip length, square corner 
- -/" × -/", / lip length 
Strikes Continued
Special Strikes (Non-Standard Lip Lengths)
Part # Description List Add $
 ANSI Strike with Tubular Lock Cutout, includes Dust Box
-XXX -/" × -/", special lip length (longer than -/"). Specify length and finish. 
Special Application Options
Example: -  for a " lip length in  finish.
NOTE: Non-standard items are considered to be special request items and have an extende lead time. Consult factory for more information.
Antimicrobial Coating
NOTE: Extended leadtime, consult factory.
Available on  and  finish. Specify AM. Example: AM
Description of Components Coated List Add $
Lever trim Inside: Lever and rose
Outside: lever and rose

NOTE: Tactile marking is applied to outside knob or lever only, unless otherwise specified. Prices shown per single lever or knob.
Part # Description List Add $
 Knurled or grooved lever (LR, LT, and LG designs only) 
 Abrasive coated lever or knob (all designs) 
Tactile Markings
Locks
24 Architectural Hardware Price List #28
T900 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
C800 Series
Ordering Guide
Finish7
605 PVD
606 PVD
612 PVD
613 PVD
622 PVD
Satin Stainless (Knob Designs)
Satin Chrome
Bright Chrome
Satin Black
Satin Nickel
Dark Oxidized Satin Bronze
Satin Bronze
Satin Brass
Bright Brass (Lever Designs)
630
619 PVD
FSchlage LFIC
1. Faculty restroom/hotel function available in SC and SE keyway only.
Not available in SFIC or prepared for competitor cylinders.
2. Request to exit option only available on lever locks. Available with C810, C850,
C853, C870, C880, C880EL & C880EU functions only.
3. KB knob not available with Schlage LFIC. Conventional and SFIC only.
4. Consult factory for other cylinder options.
5. Rose B applicable to knob designs only. Roses C, D, E, and F applicable to lever
designs only. Split design roses not available.
C8 53
Product
Family
DLR
LR
LC
LG
Lever
Lever
Lever
Lever
Lever, Handed
Lever, Handed
Knob3
Lever/Knob Design
C
01
F87 – Asylum
F86 – Storeroom
F90 – Corridor/Dormitory
F80 – Communicating
F84 – Classroom
F91 – Store Door
F88 – Apartment
F92 – Service Station
F109 – Entry
F82 – Entry/Office
Hospital Privacy
F77A – Patio
F89 – Exit
F75 – Passage/Closet
Function
62610252134
B
C
Rose Design5
3" Dia.
3-1/2" Dia.
RH Right Hand
Left Hand
Door Hand
5001 1316
Latch Bolt
Door Thickness9
Strike Options
Lip Length
XXXX
10
Heavy-Duty Grade 1
Cylindrical Lockset
D
L
C
J
T
Cylinder Type4
Temporary SFIC
SFIC (Less Core)
SFIC (With Core)
Conventional
Cylinder
40
30
44
73
77
80EL
80EU
72
53
80
70
60
82
85
50
12
25
AM
Antimicrobial Coating8
SSargent 10 Line
KIL (less cylinder)
F111 – Exit/
CommunicatingPassage
Electrically Unlocked
(Fail Secure)
Electrically Locked
(Fail Safe)
D3-1/2" Dia.
stamped, LOCK
134
138
1-3/8"–1-5/8"
TX
Security Screws
F76A – Privacy,
Bedroom or Bath
Single Dummy
LH
02
Double Dummy
48
F112 – Exit/
Communicating Storeroom
55
66
F113 – Exit/
Communicating Classroom 65
LT
LF
LV
KB
625
626
RH
F93 – Faculty
Restroom/Hotel1
E
F3-1/2" Dia. stepped
rose stamped, LOCK6
3-1/2" Dia.
stepped rose
ECorbin Russwin 2000 series 6-Pin KIL (Less Cylinder)
Keying Options
Field
6. F Rose design in 626 only.
7. Split finishes, available on levers only, consult factory.
Specify in-swing or out-swing.
8. Antimicrobial coating available on lever trim, 626 finish only.
Consult factory for other finishes.
9. Door thickness range:
Lever locks 1-3/4"–2-1/4" without spacers, 1-3/8"– 1-5/8" with spacers.
Knob locks 1-3/8"–2" without spacers or special tools.
M
N
Y
A
Yale 1210/Medeco 31 Series 6-pin FSIC (less core)
Sargent 6300 FSIC (less core)
Medeco FSIC
32 Series (less core)
Corbin/Russwin
6-pin FSIC (less core)
F110 – Classroom
Intruder
R
G
Schlage LFIC
(Less Core)
Temporary
Schlage LFIC
1-3/4"–2-1/4"
RX
Request
to Exit2
Less Conventional
Cylinder
E Rose
C Rose
Locks
25
Architectural Hardware Price List #28
C800 Series
3-
1/2
(89)
2-3/4
(70)
4-3/4
(121)
LC
3-1/2
(89)
2-3/4
(70)
5
(127)
LF
3-
1/2
(89)
2-3/4
(70)
4-1/2
(115)
LG
3-
1/2
(89)
2-3/4
(70)
4-3/4
(121)
LT
E Rose
3-1/2
(89)
2-3/4
(70)
4-3/4
(121)
LR
3-
1/2
(89)
2-3/4
(70)
5
(127)
LV
C Rose
Lever Designs
Rose Designs
D Rose F Rose
KB
3
(7
6)
2-
3/16
(56)
2-3/4
(70)
Locks
26 Architectural Hardware Price List #28
C800 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
* Split finishes priced at higher finish list price. Available on levers only.
NOTE: . Faculty restroom/hotel function available in SC and SE keyway only. Not available in SFIC or prepared for competitor cylinders.
Lever Locks

, ,
, ,
, ,

ANSI # Function Description List $
Keyless
F C Passage/closet  
F C Exit  
F C Exit/communicating passage  
FA C Patio  
FA C Privacy, bedroom or bath  
C Hospital privacy  
C Single dummy  
C Double dummy  
Keyed, Single Cylinder
F C Exit/communicating storeroom  
F C Entry/office  
F C Entry  
F C Classroom  
F C Service station  
F C Exit/communicating classroom  
F C Storeroom  
F C Corridor/dormitory  
F CFaculty restroom/hotel  
CEL Electrically locked (fail safe)  
CEU Electrically unlocked (fail secure)  
Keyed, Double Cylinder
F C Communicating  
F C Asylum  
F C Apartment  
F C Store door  
F C Classroom intruder  
Lever Locks
Locks
27
Architectural Hardware Price List #28
C800 Series
Knob Locks
NOTES:
List prices for keyed locks include standard (D) cylinder, keyed different (KD) with two (2) nickel silver keys.
For functions not shown, consult factory. Special order functions require extended lead times.
Knob locks not available prepared for competitor cylinder options.
Knob Locks

ANSI # Function Description List $
Keyless
F C Passage/closet 
FA C Privacy, bedroom or bath 
C Single dummy 
Keyed, Single Cylinder
F C Entry 
F C Classroom 
F C Storeroom 
F C Corridor 
Locks
28 Architectural Hardware Price List #28
C800 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Cylinder Types, Keying Options, and Keyways
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder Example: CD N/C
KD Keyed differently to a random combination; SC keyway with  keys (default) N/C
KA Keyed alike in pairs to a random combination; SC keyway with  keys N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key blanks
(order -bit key separately)
N/C
-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately N/C
-Bit Operated by -bit cut key for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB,
GA, SF, YA, YG keyways with  key blanks

NSK Keyed alike, sets of three or more; SC keyway with  keys 
MKD Master keyed or SKD, SC, SE, or D keyway — Keys sold separately 
NS Non-stock keyed double cylinder locks; SC keyway with  keys 
MK Master keyed or SKD double cylinder lock; SC, SE, or D keyway Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
CM Construction master keyed double cylinder locks — Keys sold separately 
LLock less conventional cylinder Example: CL Deduct 
Interchangeable Core Cylinders
TSFIC — Housing with keyed temporary SFIC construction core (Core may be
returned for a full refund) — Keys sold separately
Example: CT 
JSFIC — Housing with disposable plastic SFIC plug Example: CJ N/C
CSFIC — Housing with combinated SFIC core installed at the
factory; BA (default), BB, BC, BD, BE, BF, BG, BH, BJ,
BK, BL, BM, BQ, D keyway Keys sold separately
Example: CC 
GSchlage LFIC — Housing with keyed temporary Schlage LFIC construction
core (Core may be returned for full refund) — Keys sold separately
Example: CG 
R Schlage LFIC — Housing less core Example: CR
FSchlage LFIC — Housing with combinated Schlage LFIC installed at the
factory (SC keyway) Keys sold separately
Example: CF 
. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys & Keying.
Denotes keys must be ordered separately.
Competitor Cylinder Types
A/M/N/Y Other manufacturer IC core prep, less core 
ELock prepared for Corbin/Russwin  Series Example: CE N/C
-pin KIL cylinder, less cylinder (all designs)
S Lock prepared for Sargent  line KIL, less cylinder (all designs) Example: CS N/C
Locks
29
Architectural Hardware Price List #28
C800 Series
NOTES:
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate cylinder.
Cut Keys Ordered Separately
Part # Description List $
 SFIC — Change key, master key, construction master key, or control key;
BA, BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFIC — Change key, master key, or control key; SKC sections — D etc. 
 CONV/LFIC — -bit cut key for operating  bit cylinders — SC, SE keyways
 LFIC — -bit cut control key (to install/remove “-bit” LFIC cores) — SC keyway
SC CONV/LFIC — Key blank — SC keyway .
SC LFIC — Key blank, Control key (to install/remove LFIC Cores) — SC keyway
Locks
30 Architectural Hardware Price List #28
C800 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Configuration Options
/" Throw, -/" Backset
Part # Description List Add $
For , , and  Locks
 -/" × -/" front, " diameter, square corner N/C
For All Other Locks
 -/" × -/" front, " diameter, square corner N/C
/" Throw, -/" Backset
Part # Description List Add $
For , , and  Locks
 -/" × -/" front, " diameter, square corner 
For All Other Locks
 -/" × -/" front, " diameter, square corner 
/" Throw, -/" Backset List Add $
Part # Description
For , , and  Locks
 " × -/" front, /" diameter, square corner
 " × -/" front, /" diameter, /" radius corner
 -/" × -/" front, /" diameter, square corner
For All Other Locks
 " × -/" front, /" diameter, square corner
 " × -/" front, /" diameter, /" radius corner
 -/" × -/" front, /" diameter, square corner
Latch Bolts
Locks
31
Architectural Hardware Price List #28
C800 Series
Strikes
Antimicrobial Coating
Latch Bolts (continued)
NOTE: Extended leadtime, consult factory.
/" Throw, -/" Backset
Part # Description List Add $
 Locks ( and  finishes only, Non-Restoring)
 -/" × -/" front, " diameter, square corner. Avaiable in  or  only. 
Part # Description List Add $
 — ANSI Strike Includes Dust Box
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, square corner 
- -/" × -/", /" lip length 
NOTE: Default strike shown in bold.
Part # Description List Add $
 — T Strike with Dust Box
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, square corner 
- -/" × -/", -/" lip length, radius corner N/C
Part # Description List Add $
,  — Full Lip Strike
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, /" radius corner N/C
Available on  finish. Specify AM. Example: AM
Description of Components Coated List Add $
Lever trim Inside: Lever and rose
Outside: lever and rose

Locks
32 Architectural Hardware Price List #28
C800 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Special Strikes (Non-Standard Lip Lengths)
Part # Description List Add $
-XXX -/" × -/", special lip length (longer than -/"). Specify length. 
Special Application Options
NOTE: Tactile marking is applied to outside knob or lever only, unless otherwise specified. Prices shown are for one lever only.
NOTE: Non-standard items are considered to be special request items and have an extended lead time. Consult factory for more information.
Lip length is distance from center of mounting holes to edge of strike.
Knurled Knob and Levers (Tactile Markings)
Part # Description List Add $
 Knurled or grooved lever (LR or LG designs only) 
 Abrasive coated lever or knob (all designs) 
Lead Lining Plate
Part # Description List Add $
 Lead lining plate for C, CL 
Part # Description , , , , , , 
List Add $
 Spacers for thin door,  pair ( spacers) -/" door – Specify finish. 
Spacers for -/" Doors, C Series
Security Screws
Part # Description List Add $
TX Security screws for latch and strike. 
NOTE: Spacers are included if -/" door thickness is specified.
NOTE: Only available for use with , , , and  finish locksets.
Locks
33
Architectural Hardware Price List #28
C800 Series
Specify Description List Add $
D Rose* Stamped LOCK on inside rose (specify finish) N/C
F Rose* Stepped, stamped LOCK on inside rose (specify finish) N/C
Request to Exit
Specify Description List Add $
RX Request to exit, available on C lever models: , , , EL, EU 
Drilling Jig
Indicator Rose
Required Information — For Non-Standard Door Thickness
Non-Standard Door Thickness
* Available on inside of double cylinder functions C and C.
Description List Add $
Doors " to " thick extended inside (EI) 
Example: -/" door, -/" door extended /" inside only
Doors " to " thick extended outside (EO) 
Example: -/" door, -/" door extended /" outside only
Doors over -/ to " thick extended equally (EE) 
Part # Description List $
 Drilling Jig for C, CL, and C Locksets 
 Mount, C lever, CL, and C Series — -/" × -/" faceplate 
NOTE: Non-standard items are considered to be special request items and have an extended lead time.
Consult factory for more information.
B
LOCK
CENTERLINE
A
SPECIFY:
• Door Thickness (A)
• Lock Center to OUTSIDE of Door (B)
• Strike Center to Edge of Frame (C)
DOOR
EDGE
C
OUTSIDE
Locks
34 Architectural Hardware Price List #28
C800 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
D860
D
Product Type
Dead Bolt
Product
Family
D
Cylinder Type1
60
Turn x Turn
Turn only
Turn x Blank Plate
Turn x Occupancy Indicator
Cylinder x Classroom
Cylinder x Cylinder
Cylinder x Blank Plate
Cylinder x Turn
Function
62628752134 5103
Latch Bolt3
Door Thickness3,5
Strike Options3
XXXX
Keying Options Field
62
63
61
Heavy-Duty Grade 1
Tubular Dead Bolt
80
C
J
T
Temporary SFIC
— SFIC (Less Core)
— Conventional Cylinder
— SFIC (With Core)
626
625
613
Bright Brass
Satin Brass
Satin Bronze6
Finish2
612
605
Satin Nickel6
Bright Chrome6
Satin Chrome
Dark Oxidized
Satin Bronze
606
81
D
G
82
AM
Antimicrobial
Coating4
71
TX
Security
Screws
134
182
— 1-3/8"–1-3/4"
— 1-13/16"–2"
R
F
— Schlage FSIC (Less Core)
Temporary Schlage FSIC
— Schlage FSIC
619
D800 Series
Ordering Guide
. The Less Conventional Cylinder option is not available for the D Series.
. For split finishes, consult factory. Specify In-Swing or Out-Swing.
. Example shows default values. Refer to Configuration Options section for full details.
. Available on  finish only. Consult factory for other finishes.
. Door range — -/"–-/" default (-/"–" optional). Consult factory for applications over ".
. Special Order Finish — May require additional lead time.
Locks
35
Architectural Hardware Price List #28
D800 Series
 , , ,
, , 
ANSI # Function Description List $
Keyless
E D Thumb turn × blank plate  
E D Thumb turn only  
D Thumb turn × thumb turn (windstorm)  
D Thumb turn × occupancy indicator w/coin turn  
Keyed, Single Cylinder
E D Cylinder × turn  
E D Cylinder × blank  
E D Cylinder × classroom turn  
Keyed, Double Cylinder**
E D Cylinder × cylinder  
D800 Series
** CAUTION: Double cylinder locks used on residences and any door in a structure which is used for egress are a life safety hazard in times of emergency and their use is
not recommended. Installation should be in accordance with existing codes only.
NOTE: List prices for keyed locks include standard DORMA (D) cylinder, keyed different (KD) with two () nickel silver keys.
Locks
36 Architectural Hardware Price List #28
D800 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Cylinder Types, Keying Options, and Keyways
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder Example: DD N/C
KD Keyed differently to a random combination; SC keyway with  keys (default) N/C
KA Keyed alike in pairs to a random combination; SC keyway with  keys N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key blanks
(order -bit key separately)
N/C
-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately N/C
-Bit Operated by -bit cut key for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB,
GA, SF, YA, YG keyways with  key blanks

NSK Keyed alike, sets of three or more; SC keyway with  keys 
MKD Master keyed or SKD, SC, SE, or D keyway — Keys sold separately 
NS Non-stock keyed double cylinder locks; SC keyway with  keys 
MK Master keyed or SKD double cylinder lock; SC, SE, or D keyway Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
CM Construction master keyed double cylinder locks — Keys sold separately 
Interchangeable Core Cylinders
JLock with disposable plastic SFIC plug Example: DJ N/C
TLock with keyed temporary SFIC construction core
(cores may be returned for a full refund) — Keys sold separately
Example: DT 
CLock with combinated SFIC core installed at the factory; BA (default),
BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D keyway
Keys sold separately
Example: DC 
GSchlage LFIC — Housing with keyed temporary Schlage LFIC construction
core (Core may be returned for full refund) — Keys sold separately
Example: DG 
RSchlage LFIC — Housing less core Example: DR
FSchlage LFIC — Housing with combinated Schlage LFIC installed at the
factory (SC keyway) Keys sold separately
Example: DF 
* The Less Cylinder option is not available for the D Series.
. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys & Keying. Locks will be supplied w/plastic construction core, Option J.
Denotes keys must be ordered separately.
NOTES:
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate
Cut Keys Ordered Separately
Part # Description List $
 SFIC Change key, master key, construction master key, or control key;
BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFICChange key, master key, or control key; SKC sections — D etc. 
 CONV/ LFIC -bit cut key for operating -bit cylinders — SC, SE keyways
 LFIC - Cut key — -bit cut control key (to install/remove “-bit” LFIC cores) — SC keyway
SC CONV/LFIC — Key blank — SC keyway .
SC LFIC — Key blank, Control key (to install / remove LFIC Cores) — SC keyway
Locks
37
Architectural Hardware Price List #28
D800 Series
Part # Description List Add $
 — ANSI Strike with Dead Bolt Cutout
 -/" × -/", no lip, square corner
Part # Description List Add $
 — Full Lip Strike with Dead Bolt Cutout
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, /" radius corner N/C
Strikes
Part # Description List Add $
 — Standard Strike for Dead Bolt
 -/" × -/", no lip, square corner N/C
" Throw
Part # Description List Add $
 -/" × -/" faceplate, -/" backset, square corner N/C
 -/" × -/" faceplate, -/" backset, square corner N/C
Dead Bolts
Configuration Options
Part # Description List Add $
 — ANSI Strike with Lip and Dead Bolt Cutout
- -/" × -/", -/" lip length, square corner
- -/" × -/", -/" lip length, square corner 
NOTE: Default strike shown above in bold.
NOTE: Default configuration shown above in bold.
Locks
38 Architectural Hardware Price List #28
D800 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Specify Description List Add $
TX Security screws for all exposed fasteners. 
Antimicrobial Coating
Security Screws
Description of Components Coated List Add $
Available on  finish. Specify AM. Example: AM
Inside: thumbturn, rose, or same as outside for double cylinder 
Outside: trim ring and cylinder faceplate
NOTE: Extended leadtime, consult factory.
Required Information — For Non-Standard Door Thickness
Non-Standard Door Thickness
-/"–-/"
Door Thickness
To -/"
Door Thickness
To "
Door Thickness
Cylinder Type List Add $
Standard Standard  N/A
SFIC Standard  
LFIC Standard  
B
LOCK
CENTERLINE
A
SPECIFY:
• Door Thickness (A)
• Lock Center to OUTSIDE of Door (B)
• Strike Center to Edge of Frame (C)
DOOR
EDGE
C
OUTSIDE
NOTE: Only available for use with , , , and  finish locksets.
Locks
39
Architectural Hardware Price List #28
D800 Series
40 Architectural Hardware Price List #28
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
2. Example shows default values. Refer to Configuration Options section for full details.
1. Rose B is applicable to knob lock only. Rose E is applicable to lever lock designs only.
3. For split finishes, consult factory. Specify in-swing or out-swing.
CL 753
CL
CK
Product
Type
Knob
Trim
Leve
r
Trim
Product
Family
DLR
LR
LC
KB
Lever
Lever
Lever
Knob
Lever/Knob
Design
E
01
Storeroom
Classroom
Entry
Entry/Office
Patio
Exit
Passage/Closet
Function
626172521316
B
E
Rose Design1
605
612
613
625
626
— Satin Stainless (Knob only)
— Satin Chrome (Levers only)
— Bright Chrome (Levers only)
— Satin Bronze (Levers only)
— Satin Brass (Levers only)
— Bright Brass (Levers only)
3" Dia.
Rose
3-7/ 16"
Dia. Rose
Finish3
— 1-3/8" – 1-3/4"
5001
134
Latch Bolt2
Door Thickness
Strike Options2
Lip Length2
XXXX
10
Grade 2
Cylindrical Lockset
630
D
L
C
J
T
Cylinder Type
Construction
Core SFIC
SFIC (Less Core)
— Less Cylinder
LG
606
Dark Oxidized Satin Bronze
(Levers only)
Conventional
Cylinder
SFIC
(With Core)
Exit
/Communicating
Passage
TX
Security
Screws
30
25
12
70
40
53
50
80
Privacy, Bedroom
or Bath
Dummy Trim
One Side
134
Keying Options Field
2. Example shows default values. Refer to Configuration Options section for full details.
1. Rose B is applicable to knob lock only. Rose E is applicable to lever lock designs only.
3. For split finishes, consult factory. Specify in-swing or out-swing.
CL 753
CL
CK
Product
Type
Knob
Trim
Lever
Trim
Product
Family
DLR
LR
LC
KB
Lever
Lever
Lever
Knob
Lever/Knob
Design
E
01
Storeroom
Classroom
Entry
Entry/Office
Patio
Exit
Passage/Closet
Function
626172521316
B
E
Rose Design1
605
612
613
625
626
— Satin Stainless (Knob only)
— Satin Chrome (Levers only)
— Bright Chrome (Levers only)
— Satin Bronze (Levers only)
— Satin Brass (Levers only)
— Bright Brass (Levers only)
3" Dia.
Rose
3-7/ 16"
Dia. Rose
Finish3
— 1-3/8" – 1-3/4"
5001
134
Latch Bolt2
Door Thickness
Strike Options2
Lip Length2
XXXX
10
Grade 2
Cylindrical Lockset
630
D
L
C
J
T
Cylinder Type
Construction
Core SFIC
SFIC (Less Core)
— Less Cylinder
LG
606
Dark Oxidized Satin Bronze
(Levers only)
Conventional
Cylinder
SFIC
(With Core)
Exit/Communicating
Passage
TX
Security
Screws
30
25
12
70
40
53
50
80
Privacy, Bedroom
or Bath
Dummy Trim
One Side
134
Keying Options Field
CL700/CK700 Series
Ordering Guide
LC LG
LR
3-7/ 16
(87)
2-9/16
(65)
4-5/8
(117) 3-7/ 16
(87)
4-5/8
(117)
2-9/16
(65)
3-7/ 16
(87)
4-3/4
(121)
2-9/16
(65)
2-1/4
(57)
2-5/8
(67)
2-3/16
(56)
KB
Locks
41
Architectural Hardware Price List #28
CL700/CK700 Series
Lever Locks
Lever Locks
 , , ,
, 
ANSI # Function Description List $
Keyless
F CL Passage/closet  
F CL Exit  
F CL Exit/communicating passage  
FA CL Patio  
FA CL Privacy, bedroom or bath  
CL Single dummy  
Keyed, Single Cylinder
F CL Entry/office  
F CL Entry  
F CL Classroom  
F CL Storeroom  
NOTES:
Split finishes will be priced at the higher finish list price.
Split trim not available.
Locks
42 Architectural Hardware Price List #28
CL700/CK700 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Knob Locks
Knob Locks

ANSI # Function Description List $
Keyless
F CK Passage/closet 
FA CK Patio 
FA CK Privacy, bedroom or bath 
CK Single dummy 
Keyed, Single Cylinder
F CK Entry 
F CK Classroom 
F CK Storeroom 
NOTE: List prices for keyed locks include standard DORMA (D) cylinder, keyed different (KD) with two () nickel silver keys.
Locks
43
Architectural Hardware Price List #28
CL700/CK700 Series
Cylinder Types, Keying Options, and Keyways
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder Example: CLD N/C
KD Keyed differently to a random combination; SC keyway with  keys (default) N/C
KA Keyed alike in pairs to a random combination; SC keyway with  keys N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key blanks
(order -bit key separately) N/C
-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately N/C
-Bit Operated by -bit cut key for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB,
GA, SF, YA, YG keyways with  key blanks

NSK Keyed alike, sets of three or more; SC keyway with  keys 
MKD Master keyed or SKD, SC, SE, or D keyway — Keys sold separately 
NS Non-stock keyed double cylinder locks; SC keyway with  keys 
MK Master keyed or SKD double cylinder lock; SC, SE, or D keyway Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
CM Construction master keyed double cylinder locks — Keys sold separately 
LLock less conventional cylinder Example: CLL Deduct 
Small Format Interchangeable Core Cylinders
JLock with disposable plastic SFIC plug Example: CLJ N/C
TLock with keyed temporary SFIC construction core
(cores may be returned for a full refund) — Keys sold separately
Example: CLT 
CLock with combinated SFIC core installed at the factory;
BA (default), BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL,
BM, BQ, D keyway — Keys sold separately
Example: CLC 
NOTES:
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key , sold separately, to operate cylinder.
Cut Keys Ordered Separately
Part # Description List $
 Change key, master key, construction master key, or control key;
BA, BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 Change key, master key, or control key; SKC sections — D etc. 
  bit cut key for operating -bit cylinders – SC, SE keyways
. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys & Keying.
Locks will be supplied w/plastic construction core, Option J.
Denotes keys must be ordered separately.
Locks
44 Architectural Hardware Price List #28
CL700/CK700 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Configuration Options
/" Throw, -/" Backset
Part # Description List Add $
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
For , , , , or  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
Latch Bolts
/" Throw, -/" Backset
Part # Description List Add $
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
For , , , , or  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, " diameter, square corner N/C
NOTE: Default configurations for CL shown above in bold.
Locks
45
Architectural Hardware Price List #28
CL700/CK700 Series
Latch Bolts (continued)
/" Throw, -/" Backset
Part # Description List Add $
For  Locks
 " × -/" front, /" diameter, square corner
 " × -/" front, /" diameter, /" radius corner
 -/" × -/" front, " diameter, square corner
For , , , , or  Locks
 " × -/" front, /" diameter, square corner
 " × -/" front, /" diameter, /" radius corner
 -/" × -/" front, " diameter, square corner
For  Locks
 " × -/" front, /" diameter, square corner
 " × -/" front, /" diameter, /" radius corner
 -/" × -/" front, " diameter, square corner
For  Locks
 " × -/" front, /" diameter, square corner
 " × -/" front, /" diameter, /" radius corner
 -/" × -/" front, " diameter, square corner
Locks
46 Architectural Hardware Price List #28
CL700/CK700 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Strikes
Part # Description List Add $
 — ANSI Strike with Cylindrical Lock Cutout
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, square corner 
NOTE: Default strike for CL lock shown above in bold.
Part # Description List Add $
 — T Strike with Dust Box
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, square corner 
- -/" × -/", -/" lip length, radius corner N/C
Part # Description List Add $
,  — Full Lip Strike
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, /" radius corner N/C
Locks
47
Architectural Hardware Price List #28
CL700/CK700 Series
Special Application Options
Part # Description List Add $
 Abrasive coated lever or knob (all designs) 
NOTE: Tactile marking is applied to outside knob or lever only, unless otherwise specified.
Lead Lining Plate
Part # Description List Add $
 Lead lining plate for C, CL 
Security Screws
Specify Description List Add $
TX Security screws for latch and strike.  Finish Only 
Special Strikes (Non-Standard Lip Lengths)
Part # Description List Add $
- -/" × -/", /" lip length N/C
-XXX -/" × -/", special lip length (other than /", -/", or -/"). Specify length. 
Part # Description List $
 Drilling jig for C, CL, and C locksets 
 Mount, C lever, CL, and C Series — -/" × -/" faceplate 
Drilling Jig
Abrasive Coated Knobs and Levers (Tactile Markings)
NOTE: Only available for use with , , , and  finish locksets.
Locks
48 Architectural Hardware Price List #28
CL700/CK700 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
C5 53
Product
Family
D
Cylinder Type1
LR
LR
LC
LG
Lever Design
C
01
Storeroom
Classroom
Entry
Office/Entry
Patio
Passage/Closet
Dummy Trim One Side
Function
62615250 134
Rose Design
605
— Satin Chrome
— Bright Chrome
— Satin Nickel
— Dark Oxidized Satin Bronze
— Satin Brass
— Bright Brass
Finish2
5001
Latch Bolt3
Door Thickness
Strike Options3
XXXX
25
30
10
Grade 2
Cylindrical Lockset
40
50
613
625
626
606
53
70
80
C
J
SFIC
(Less Core)
SFIC
(With Core)
DConventional
Cylinder 619
2. For split finishes, consult factory.
1. The C500 is not available less conventional cylinder.
All keyed functions are available with or without SFIC cores.
3. Example shows default values. Refer to Configuration Options section for full details.
Exit/Communicating
Passage
Privacy,
Bedroom or Bath
TTemporary SFIC
134 — 1-3/8"–1-3/4"
Keying Options Field
C5 53
Product
Family
D
Cylinder Type1
LR
LR
LC
LG
Lever Design
C
01
Storeroom
Classroom
Entry
Office/Entry
Patio
Passage/Closet
Dummy Trim One Side
Function
62615250 134
Rose Design
605
— Satin Chrome
— Bright Chrome
— Satin Nickel
— Dark Oxidized Satin Bronze
— Satin Brass
— Bright Brass
Finish2
5001
Latch Bolt3
Door Thickness
Strike Options4
XXXX
25
30
10
Grade 2
Cylindrical Lockset
40
50
613
625
626
606
53
70
80
C
J
SFIC (Less Core)
SFIC (With Core)
D Conventional
Cylinder 619
2. For split finishes, consult factory. Specify in-swing or out-swing.
1. The C500 is not available less conventional cylinder.
All keyed functions are available with or without SFIC cores.
3. Example shows default values. Refer to Configuration Options section for full details.
Exit/Communicating
Passage
Privacy,
Bedroom or Bath
TTemporary SFIC
134 — 1-3/8"–1-3/4"
Keying Options Field
C500 Series
LR
3-5/16
(84)
4-1/2
(114)
2-3/8
(60)
LC
3-5/16
(84)
4-1/2
(114)
2-3/8
(60)
Finish Availability Chart
     
LR
LC
LG ———
LG
3-7/ 16
(87)
4-3/4
(121)
2-9/16
(65)
NOTE: SFIC available on LR and LC lever designs
only, not available on LG lever.
Locks
49
Architectural Hardware Price List #28
C500 Series
Lever Locks
Lever Locks
 , , ,
, 
ANSI # Function Description List $
Keyless
F C Passage/closet  
F C Exit/Communicating passage  
FA C Patio  
FA C Privacy, bedroom or bath  
C Single dummy  
Keyed, Single Cylinder
FA C Entry/Office  
F C Entry  
F C Classroom  
F C Storeroom  
NOTE: Split finishes will be priced at the higher finish list price.
NOTES:
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate cylinder.
Cut Keys Ordered Separately
Part # Description List $
 Change key, master key, construction master key, or control key; BA, BB, BC, BD, BE, BF
BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFIC – Change key, master key, or control key; SKC sections — D etc. 
 -bit cut key for operating -bit cylinders – SC, SE keyways
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder Example: CD N/C
KD Keyed differently to a random combination; SC keyway with  keys (default) N/C
-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key blanks (order -bit key separately) N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE, AA, CA, CB,
CC, CD, CE, RA, RB, GA, SF, YA, YG keyways with  key blanks

MKD Master keyed or CMK, SKD, KA, SC, SE, or D keyway — Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
Small Format Interchangeable Core Cylinders
JSFIC core sold separately (see Cylinders & Keying) Example: CJ N/C
TTemporary SFIC construction core
(Cores may be returned for a full refund) — Keys sold separately
Example: CT 
CLock with combinated SFIC core; BA (default). Shipped seperately
BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D keyway
Keys sold separately
Example: CC 
Cylinder Types, Keying Options & Keyways
. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys & Keying.
Denotes keys must be ordered separately.
Locks
50 Architectural Hardware Price List #28
C500 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Configuration Options
/" Throw, -/" Backset
Part # Description Add List $
For  or  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
For , , , , or  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
Latch Bolts
/" Throw, -/" Backset
Part # Description List Add $
For  or  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, /" diameter, square corner N/C
For , , , , or  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, /" diameter, square corner N/C
For  Locks
 " × -/" front, /" diameter, square corner N/C
 " × -/" front, /" diameter, /" radius corner N/C
 -/" × -/" front, /" diameter, square corner N/C
NOTE: Default configurations for C shown above in bold.
Locks
51
Architectural Hardware Price List #28
C500 Series
Special Application Options
Strikes
Part # Description List Add $
 — ANSI Strike with Cylindrical Lock Cutout
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, square corner 
Part # Description List Add $
,  — Full Lip Strike
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, /" radius corner N/C
NOTE: Default strike for C lock shown above in bold.
Part # Description List Add $
,  — "T" Strike with Dust Box
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, square corner 
- -/" × -/", -/" lip length, /" radius corner N/C
- -/" × -/", -/" lip length, /" radius corner 
Part # Description List Add $
 Abrasive coated lever (all designs) 
NOTE: Tactile marking is applied to outside lever only, unless otherwise specified.
Abrasive Coated Levers (Tactile Markings)
Part # Description List $
 Drilling jig for C, CL, and C locksets 
 Mount, C lever, CL, and C Series — -/" × -/" faceplate 
Drilling Jig
Locks
52 Architectural Hardware Price List #28
C500 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
26173
DB 660
DB
Product Type
Dead Bolt
Product
Family
D
60
Cylinder × Cylinder
Cylinder × Turn
Function
630 261705103
Latch Bolt6
Door Thickness6
Strike Options6
XXXX
Keying Options Field
62
Cylinder × Blank1 80
Grade 2
Tubular Dead Bolt
Bright Brass
Finish4
605
Dark Oxidized
Satin Bronze613
Cylinder Type5
C
J
T
26171
26170
Temporary SFIC
Adj, Drive-In
Adj, 1" RC
Adj, 1" SQ with Filler
1-3/8"–
1-3/4"
SFIC (Less Core)
SFIC (With Core)
Conventional
Cylinder
D
1. The Less Conventional Cylinder option is not available for the DB600 Series.
2. For split finishes, consult factory.
3. Example shows default values. Refer to Configuration Options section for full details.
4. 619 finish available for standard cylinder only.
Bright Stainless3
Satin Stainless
629
630
Satin Nickel2
Satin Chrome
619
626
134
134
DB600 Series
Ordering Guide
. DB not available in  finish.
.  finish available standard cylinder only.
.  finish only available for DB (standard and SFIC)
. For split finishes, consult factory. Specify in-swing or out-swing.
. The Less Conventional Cylinder option is not available for the DB Series.
. Example shows default values. Refer to Configuration Options section for full details.
Locks
53
Architectural Hardware Price List #28
DB600 Series
DB600 Series
*  finish available standard cylinder only.
** finish only available for DB – standard and SFIC
NOTES:
List prices for keyed locks include standard DORMA (D) cylinder, keyed different (KD) with two (2) nickel silver keys.
Split finishes will be priced at the higher finish list price.
,

, ,
* **
ANSI # Function Description List $
E DB Cylinder × turn  
E DB Cylinder × cylinder  
D Cylinder × blank  
Cylinder Types, Keying Options & Keyways
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder Example: DBD N/C
KD Keyed differently to a random combination; SC keyway with  keys (default) N/C
KA Keyed alike in pairs to a random combination; SC keyway with  keys 
-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately 
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key blanks (order -bit separately) 
-Bit Operated by -bit cut key for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB,
GA, SF, YA, YG keyways with  key blanks

NSK Keyed alike, sets of three or more; SC keyway with  keys 
MKD Master keyed or SKD, SC, SE, or D keyway — Keys sold separately 
NS Keyed alike double cylinder locks, sets of three or more; SC keyway with  keys 
MK Master keyed or SKD double cylinder lock; SC, SE, or D keyway Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
CM Construction master keyed double cylinder locks — Keys sold separately 
Small Format Interchangeable Core Cylinders
JSFIC core sold seperately Example: DBJ N/C
TLocks with keyed temporary SFIC construction cores
(Cores may be returned for a full refund) — Keys sold separately
Example: DBT 
CLock with combinated SFIC core Shipped Separately
BA (default), BB, BC, BD, BE, BF, BG, BH, BJ, BK,
BL, BM, BQ, D keyway — Keys sold separately
Example: DBC 
NOTES:
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key , sold separately, to operate cylinder.
Cut Keys Ordered Separately
Part # Description List $
 Change key, master key, construction master key, or control key;
BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFIC – Change key, master key, or control key; SKC sections — D etc. 
 -bit cut key for operating -bit cylinders – SC, SE keyways
* The Less Cylinder option is not available for the DB Series.
. For uncombinated cores, UNC, cores must be ordered separately, see Cylinders, Keys & Keying.
Denotes keys must be ordered separately.
Locks
54 Architectural Hardware Price List #28
DB600 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
Part # Description List Add $
 — Full Lip Strike with Dead Bolt Cutout
- -/" × -/", -/" lip length, square corner N/C
- -/" × -/", -/" lip length, /" radius corner N/C
Strikes
Part # Description List Add $
 — Standard Strike for Dead Bolt
 -/" × -/", no lip, square corner N/C
" Throw, -/" – -/" Adjustable Backset
Part # Description List Add $
 " × -/" faceplate, square corner (-/" wide w/filler) N/C
 " × -/" Faceplate, Radius Corner N/C
 " diameter, drive in ( Finish only) N/C
Dead Bolts
Configuration Options
NOTE: Default configuration shown above in bold.
NOTE: Default strike shown above in bold.
Part # Description List Add $
 — ANSI Strike with Dead Bolt Cutout
 -/" × -/", no lip, square corner
Locks
55
Architectural Hardware Price List #28
DB600 Series
56 Architectural Hardware Price List #28
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
L
C300 Series
Finish Availability Chart
   
LR
LC
LG
LS
L
Levers
Strikes
LG
LC LR LS Handed Lever
C3 53 LRB
LSB
LGB
LCB
LRB
Lever
Function
626
Finish
Backset Strike
Faceplate
Handing Keyway
Keying
Cylinder
Type
234N
238N
234F
238F
100R
118S
100S
RH SCKD
D
5001
5101
RH
D
LH
SC
D100
5201
5202
605
619
626
613
40
53
30
01
10
Single Dummy
Passage
Patio
Privacy
Entry
Lever Handed
L118
Lever
Lever
Lever
Lever
Satin Chrome
Dark Bronze
Satin Nickel
Bright Brass
2-3/8" Fire
2-3/4" Fire
2-3/8" Non-Fire*
2-3/4" Non-Fire*
ANSI Strike,
Square Corner
T Strike,
Square Corner
SC Keyway
Standard Cylinder
DORMA SKC D100 Keyway
Full Lip,
Square Corner
Full Lip,
Radius Corner
1" Square
1-1/8" Square
1" Radius
DRIV
Drive-In 238N Only
Product
Family
Grade 2
Cylindrical Lockset
LEVER LC LEVER LG
LEVER LR LEVER LS
2-
1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2" 2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114) (64)
(67)
(114)
(64)
(67)
(114)
LEVER LC LEVER LG
LEVER LR LEVER LS
2-1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2" 2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114) (64)
(67)
(114)
(64)
(67)
(114)
LEVER LC LEVER LG
LEVER LR LEVER LS
2-1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114)
(64)
(67)
(114)
(64)
(67)
(114)
LEVER LC LEVER LG
LEVER LR LEVER LS
2-1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114)
(64)
(67)
(114)
(64)
(67)
(114)
AS STRIKE
FR STRIKE
TS STRIKE
AS STRIKE
FR STRIKE
TS STRIKE
AS STRIKE
FR STRIKE
TS STRIKE
ANSI
Strike
T Strike Full Lip
*C and C only
available with fire rated latch.
Locks
57
Architectural Hardware Price List #28
C300 Series
2-1/4
(57)
2-5/8
(67)
4-5/8
(117)
 , , 
ANSI # Function Description List $
C Single dummy  
F C Passage/closet  
FA C Patio  
FA C Privacy, bedroom, or bath  
F C Entry  
Option Description List $
 Full lip strike, radius corner — default N/C
 ANSI strike
 T strike, square corner N/C
 T strike, radius corner N/C
 Full lip strike, square corner N/C
Option Description List $
KD Keyed different, default for SC keyway — default N/C
KA Keyed alike, available in SC keyway 
MKD Master keyed — Keys sold separately 
CMK Construction master keyed — Keys sold separately 
-BIT Operated by -bit cut key for easy re-keying, SC keyway — Keys sold separately 
-BIT Operated by -bit cut key for easy re-keying, D keyway — Keys sold separately 
Part # Description List $
 Change key, master key, construction master key, or control key;
BA, BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFIC – change key, master key, construction master key ; SKC sections — D etc. 
 -bit cut key for operating -bit cylinders – SC, SE keyways
Option Description List $
C/C Latches
N -/" Backset non-fire, default latch N/C
N -/" Backset non-fire, optional latch N/C
F -/" Backset fire rated, optional latch
F -/" Backset fire rated, optional latch
C/C Latches
F -/" Backset fire rated N/C
F -/" Backset fire rated N/C
Strikes
Keying
Keys
Latches
NOTE: Less Cylinder option is not avaiolable on the C series.
Denotes keys must be ordered separately.
NOTES:
Distribution of DORMA SKC keys (listed as D100) is restricted. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate cylinder.
Part # Description List $
 Abrasive coated lever (all designs) 
Abrasive Coated Levers (Tactile Markings)
NOTE: Tactile marking is applied to outside lever only, unless otherwise specified.
Locks
58 Architectural Hardware Price List #28
C300 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Service
Parts
Surface
Closers
Locks
Architectural
Pulls & Handles
J300 Series
J3 10 LRB
LSB
LGB
LRB
Entry Single Cylinder Satin Chrome
Lever
Finish
Faceplate
Strike
Keying
Handing
Cylinder Type
Backset
Function
626
605
619
RH
LH
D
J
C
T
613
626
234F
238F
118S
100S
100R 5704
5703
5701
5706
5705
2-3/8" Fire
2-3/4" Fire
1" Square
1-1/8" Square
1" Radiused
RH DSCKD
10
46
Privacy with Indicator
Entry – Double Cylinder 53
— (1) T Strike Square, (1) No Lip Square
— (1) Full Lip Square, (1) No Lip Square
— (1) Full Lip Radiused, (1) Full Lip Radiused
— (1) Full Lip Square, (1) Full Lip Square
LCB
— Standard Cylinder
SFIC (Less Core)
SFIC (With Core)
Temporary SFIC
— (1) Full Lip Radiused, (1) No Lip Radiused
Lever (Handed)
Lever
L118
Lever
Lever
Lever
Left Hand/Left Hand Reverse
Right Hand/Right Hand Reverse
Dark Bronze
Satin Nickel
Bright Brass
Product
Family
Grade 2
Interconnected Lockset
LG
LC LR LS — Handed Lever
LEVER LC LEVER LG
LEVER LR LEVER LS
2-
1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2" 2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114) (64)
(67)
(114)
(64)
(67)
(114)
LEVER LC LEVER LG
LEVER LR LEVER LS
2-1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2" 2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114) (64)
(67)
(114)
(64)
(67)
(114)
LEVER LC LEVER LG
LEVER LR LEVER LS
2-1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114)
(64)
(67)
(114)
(64)
(67)
(114)
LEVER LC LEVER LG
LEVER LR LEVER LS
2-1/2"
2-5/8"
(64)
(67)
(114)
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
2-1/2"
2-5/8"
4-1/2"
(64)
(67)
(114)
(64)
(67)
(114)
(64)
(67)
(114)
Levers
Strikes
AS STRIKE
FR STRIKE
TS STRIKE
AS STRIKE
FR STRIKE
TS STRIKE
T Strike Full Lip No Lip, Deadbolt Strike
Finish Availability Chart
   
LR
LC
LG
LS
L
L
2-1/4
(57)
2-5/8
(67)
4-5/8
(117)
. J not available in .
. SFIC core on C function available with LR lever only.
Locks
59
Architectural Hardware Price List #28
J300 Series
All Levers — Per Chart
 , , 
ANSI # Function Description List $
F J Entrance, Single Locking  
J Privacy with Indicator  
F J Entrance, Double Locking  
Strikes
Option Description List Add $
 Lock — T strike square/Deadbolt — no lip square (default) N/C
 Lock — full lip square/Deadbolt — no lip square N/C
 Lock — full lip radiused/Deadbolt — no lip radiused N/C
 Lock — full lip square/Deadbolt — full lip square N/C
 Lock — full lip radiused/Deadbolt — full lip radiused N/C
Description
Split Finish 
Cut Keys Ordered Separately
Part # Description List $
 Change key, master key, construction master key, or control key; BA,
BB, BC, BD, BE, BF BG, BH, BJ, BK, BL, BM, BQ, SC, SE sections
 SFIC – Change key, master key, or control key; SKC sections — D etc. 
 -bit cut key for operating -bit cylinders – SC, SE keyways
NOTE: -bit cylinder comes with () uncut keys and will require a -bit cut key, sold separately, to operate cylinder. SC and SE keyways only.
Cylinder Types, Keying Options and Keyways
Cylinder Option Description List Add/Deduct $
Conventional Cylinders (non-interchangeable core)
DConventional cylinder
KD Keyed differently to a random combination; SC keyway with  keys (default) N/C
KA Keyed alike in pairs to a random combination; SC keyway with  keys N/C
-Bit Operated by -bit cut key for easy rekeying; SC, SE keyway with  key blanks
(order -bit separately)

-Bit Operated by -bit cut key for easy rekeying; D keyway — Keys sold separately 
-Bit Operated by -bit cut key for easy rekeying; AA, CA, CB, CC, CD, CE, RA, RB,
GA, SF, YA, YG keyways with  key blanks

NSK Keyed alike, sets of three or more; SC keyway with  keys 
MKD Master keyed; SC, SE, or D keyway — Keys sold separately 
MK Master keyed double cylinder lock; SC, SE, or D keyway Keys sold separately 
CMK Construction master keyed single cylinder locks — Keys sold separately 
CM Construction master keyed double cylinder locks — Keys sold separately 
LLock less conventional cylinder, per cylinder Example: JL Deduct 
Small Format Interchangeable Core Cylinders
JLock with disposable plastic SFIC construction core Example: JJ N/C
TLock with keyed temporary SFIC construction core, per cylinder (cores may be
returned for a full refund) — Keys sold separately
Example: JT 
CLock with combinated SFIC core installed at the factory; BA (default),
BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BQ, D keyway
Keys sold separately
Example: JC 
Denotes keys must be ordered separately.
Locks
60 Architectural Hardware Price List #28
J300 Series
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Surface
Closers
Locks
Architectural
Pulls & Handles
Service
Parts
Cylinders, Keys, and Keying
Product Guide
CYLINDER AVAILABILITY Conventional Interchangeable
Core -Pin
Interchangeable
Core -Pin
Conventional
Hotel
Interchangeable
Core Hotel
Mortise Cylinder    
Rim Cylinder   
KIL Cylinder  — —  —
KIK Cylinder  — — — —
Small Format
Interchangeable Core —   —
KEYWAY AVAILABILITY
Yes No
SC Keyway SE Keyway
Retrofit Keyways
AA, CA, CB, CC, CD,
CE, RA, RB, GA, SF,
WA, YA,YG
SFIC Keyways
BA, BB, BC, BD, BE,
BF, BG, BH, BJ, BK,
BL, BM, BQ
DORMA SKC
Keyways D
KD
Keyed different to a
random combination
KA
Keyed alike in pairs to
a random combination
NSK
Keyed alike in sets of
 or more
MKD
Master keyed or keyed to
a specific combination
CMK
Construction master
keyed (Not available SFIC)
Cylinders, Keys, and Keying
61
Architectural Hardware Price List #28
Product Guide
Master Keying
Master keying charges do not include keys. Always order and price keys as a separate line item.
A completed Key System Specifcation Form is required for every new master key system ordered. Orders
and keying schedules must use BHMA/ANSI Standard Key Coding Symbols. See ANSI . for
reference.
Keying capacity varies greatly with product and system architecture. Check keying requirements prior to
selecting product. Expressions like "Plan for maximum expansion" have no meaning. The table below is a
very general guide and can be misinterpreted. For more information, please contact Customer Service.
Cylinder/Core
Mechanism
Theoretical Number of
Changes Under the Top
Master Key
System
Capacity
Example of Theoretical Keying
Capacity in Three Levels of Keying (Grand
Master, Master and Changes)
SC Keyway with
Construction Keying 45 = 1,024 Smaller
Projects
GMK and
16 Masters of 64 Changes Each
SC Keyway without
Construction Keying 46 = 4,096 Medium
Projects
GMK and
16 Masters of 256 Changes Each
77BA, BB etc. SFIC only 47 = 16,384 Larger
Projects
GMK and
64 Masters of 256 Changes Each
DORMA SKC with
Construction keying 6 × 46 = 24,576 Very Large
Projects
GMK and
96 Masters of 256 Changes Each
DORMA SKC
without Construction
Keying
6 × 47 = 98,304
Extremely
Large
Projects
GMK and
384 Masters of 256 Changes Each
DORMA SKC
Distribution of DORMA SKC (Shown in the price list as D keyway) is restricted. Possession of a price
list does not constitute authorization to purchase DORMA SKC. Contact your local representative for
information about authorization to purchase DORMA SKC.
DORMA SKC may only be used in the USA and Canada.
Cylinders, Keys, and Keying
62 Architectural Hardware Price List #28
Master Keying/ DORMA SKC Policy
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Surface
Closers
Locks
Architectural
Pulls & Handles
Service
Parts
90 X10
90 X
Conventional Mortise —
Cylinder Type
SC 118
AA
SC — Schlage C
— Schlage E
Keyway
Length
KD
Keying
118
114
138
112
158
— 1-3/4"
— 1-5/8"
— 1-1/2"
— 1-3/8"
— 1-1/4"
— 1-1/8"
626
— Bright Brass
— Satin Brass
— Satin Bronze
— Bright Chrome
— Satin Chrome
Finish
605
KD
KA2
NSK
— Master Keyed
Keyed Different
606
Dark Oxidized Satin Bronze
134
MKD
626
625
613
612
CD
CC
CB
CA
CE
SF
GA
RB
RA
YG
YA
— Arrow A
— Corbin 60
— Corbin 67
— Corbin 77
— Corbin 59A1
— CorbinRusswin L4
— Russwin 981
— Russwin D1
— Sargent LA
— Schlage F
— Yale 8
— Yale GA
Retrofit Keyways
Available 0-Bitted Only
SE
CMK
D100
DORMA SKC
01
02
Cam
dormakaba M9050, 9080 & 9082 (2) Mortise Locks;
dormakaba 9100, 9300, 9400 & 9500
Exit Y Trim/Options & Other Straight Cam Applications
dormakaba 5000 Series Exit J Trim,
Sargent & Yale Narrow
Adams Rite & dormakaba 1340KR
Key Removable Mullion
dormakaba M9053, 9070, 9071 (2), 9076,
9077 (2) & 9060 Insider Cylinder Mortise Locks
dormakaba M9056, 9080EL/EU, 9080ELRX/EURX
9082EL/EU & M9900 Mortise Locks w/Dead Bolts
0BIT
10
11
12
15
16
19
30
31
13
09
Adams Rite 4070
CorbinRusswin DL4000 Style —
32
D900 —
Falcon Dead Bolt Style Clover
Best & CorbinRusswin Style Clover
dormakaba M9060 Outside Cylinder Mortise Locks;
dormakaba 9600, 9700 & 9800
Exit Z Trim w/08 or 11 Functions
dormakaba 9600, 9700 & 9800 Exit
Z Trim w/09 or 12 Functions
630
200
214
212
— 3"
— 2-3/4"
— 2-1/2"
— 2-1/4"
— 2"
300
234
Satin Stainless
(also for use with 619)
, —
Construction Master Keyed
SC & D100 provided in 1-bit - 1-bit key sold
separately; other keyways provided in 0-bit
Keyed Alike, Sets of 2
Cylinder Ring
(List Add)
Keyed Alike, sets of 3 or More
Schlage Style Clover (L)
Conventional (Non-IC)
Mortise Cylinders
Ordering Guide
Option Keyway Example Keys All Finishes $
KD (standard)/KA SC X SC   KD  keys ea. 
NSK (keyed alike, sets of  or more) SC X SC   NSK KA  keys ea. Add 
Master keyed SC, SE, D X SC   MKD Keys sold separately Add 
Construction master keyed SC, SE, D X SC   CMK Keys sold separately Add 
-Bit SC, SE X SC   BIT  key blanks provided
(-bit key needed to operate).

-Bit D X D   BIT Keys sold separately 
-Bit Retro X RB   BIT  key blanks 
, , , , or  length X SC   KD Add 
, , , or  length B SC   KD Add 
Denotes keys must be ordered separately.
Keys Ordered Separately for MKD, CMK, and SKC
Part # Description List $
 Cut key — change key, master key, construction key; SC, SE keyway
 Cut key — change key, master key, construction key; SKC sections - D etc. 
 -bit cut key for operating -bit cylinders; SC keyways only
NOTES:
D100 keyway cylinders must be ordered 0-bitted or MKD; keys sold separately.
Other restrictions apply. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate cylinder. SC and SE keyways only.
Length
Length Includes Cam Mortise Cylinder
NOTE: Not all keyways available in all cylinder lengths.
Consult factory.
NOTE: For Cylinder Rings, refer to page .
Cylinders, Keys, and Keying
63
Architectural Hardware Price List #28
Mortise Cylinders
97 X10
96
For 7 Pin Core
For 6 Pin Core
Cylinder Type
138 626
— Bright Brass
— Satin Brass
— Satin Bronze
— Bright Chrome
— Satin Chrome
Finish
605
606
Dark Oxidized Satin Bronze
626
625
613
612
97
01
02
Cam
10
11
12
15
16
19
30
31
13
09
630
Length
138
— 1-3/4"
— 1-3/8"
134
200
214
212
— 3"
— 2-1/2"
— 2-1/4"
— 2"
300
Satin Stainless
(also for use with 619)
X
Cylinder Ring
(List Add)
dormakaba M9050, 9080 & 9082 (2) Mortise Locks;
dormakaba 9100, 9300, 9400 & 9500
Exit Y Trim/Options & Other Straight Cam Applications
dormakaba 5000 Series Exit J Trim,
Sargent & Yale Narrow
Adams Rite 4070
Adams Rite & dormakaba 1340KR
Key Removable Mullion
dormakaba 9600, 9700 & 9800 Exit
Z Trim w/09 or 12 Functions
dormakaba M9056, 9080EL/EU, 9080ELRX/EURX
9082EL/EU & M9900 Mortise Locks w/Dead Bolts
dormakaba M9053, 9070, 9071 (2), 9076,
9077 (2) & 9060 Inside Cylinder Mortise Locks
dormakaba M9060 Outside Cylinder Mortise Locks;
dormakaba 9600, 9700 & 9800
Exit Z Trim w/08 or 11 Functions
D900, Schlage Style Clover (L) —
Best & CorbinRusswin Style Clover
Falcon Dead Bolt Style Clover
CorbinRusswin DL4000 Style —
Small Format Interchangeable Core Mortise Housings
Ordering Guide
Description Example All Finishes $
Housing less core X    
Housing less core —  or  length (extended leadtime) X    Add 
Housing less core —  or  length (extended leadtime) X    Add 
Length
Length Includes Cam SFIC Mortise Housing
NOTES:
• For Cylinder Rings, refer to page .
• To order cores, refer to page .
Cylinders, Keys, and Keying
64 Architectural Hardware Price List #28
Mortise Cylinders
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Surface
Closers
Locks
Architectural
Pulls & Handles
Service
Parts
91 X
91
Dummy
Cylinder Type
118
Length
118
1-1/8" —
1-1/4"
626
— Bright Brass
— Satin Brass
— Satin Bronze
— Bright Chrome
— Satin Chrome
Finish
605
612
606
Dark Oxidized Satin Bronze
626
625
613
114
X
Cylinder Ring
(List Add)
Dummy and Thumbturn Cylinders
Ordering Guides
Description Example All Finishes $
 Series dummy cylinder X   
 Series thumbturn cylinder X    
NOTE: For cylinders over -/" long, contact the factory.
92 X10
92
Thumbturn —
Cylinder Type
118
Length
118
— 1"
— 1-1/4"
— 1-1/8"
626
— Satin Chrome
— Bright Chrome
— Satin Bronze
— Satin Brass
— Bright Brass
Finish
612
606
Dark Oxidized
Satin Bronze
626
625
613
114
01
02
Cam
Adams Rite 4070
Adams Rite & dormakaba 1340KR
Key Removable Mullion
605
NOTE: For special cam applications, consult DORMA Technical Services.
dormakaba M9050, 9080 & 9082 (2) Mortise Locks;
DORMA 9100, 9300, 9400 & 9500
Exit Y Trim/Options & Other Straight Cam Applications
dormakaba M9053, 9070, 9071 (2), 9076,
9077 (2) & 9060 Insider Cylinder Mortise Locks
dormakaba M9056, 9080EL/EU, 9080ELRX/EURX
9082EL/EU & M9900 Mortise Locks w/Dead Bolts
Best & CorbinRusswin Style Clover
, —
10
11
12
19
X
Cylinder Ring
(List Add)
100
NOTE: For special arm applications, consult Technical Services.
Thumbturn Cylinder
Dummy Cylinder
NOTE: For Cylinder Rings, refer to page .
NOTE: For Cylinder Rings, refer to page .
Cylinders, Keys, and Keying
65
Architectural Hardware Price List #28
Mortise Cylinders
Mortise Cylinder Cams for DORMA Products
Ordering Guide
Description U/M List $
Cams — D, D, D, D, D, D, D, D, D, D, D ea.
Cams — C, C, C, C, C, C, C, C ea.
63 10
63
Mortise Cylinder Cam —
Product Type
D
Pattern
C
D— dormakaba Conventional
dormakaba SFIC Screw-On
dormakaba 93R Housing for Schlage FSIC
01
02
Cam
dormakaba M9050, 9080 & 9082 (2) Mortise Locks;
dormakaba 9100, 9300, 9400 & 9500 (prior to 11/2014)
Exit Y Trim/Options & Other Straight Cam Applications
dormakaba 5000 Series Exit J Trim,
Sargent & Yale Narrow
dormakaba Key Removable Mullion & Adams Rite
dormakaba M9053, 9070, 9071 (2), 9076,
9077 (2) & 9060 Insider Cylinder Mortise Locks;
dormakaba 9500 05 and 08 Functions (11/2014 or later)
dormakaba M9056, 9080EL/EU, 9080ELRX/EURX
9082EL/EU & M9900 Mortise Locks w/Dead Bolts’
10
11
12
15
16
19
22
13
09
Adams Rite 4070 & Amarlite: Baldwin Mortise Locks,
Miscellaneous Non-dormakaba Straight Cam Applications
Best & CorbinRusswin Style Clover
Vingcard
dormakaba M9060 Outside Cylinder Mortise Locks;
dormakaba 9500 05 and 08 Functions (11/2014 or later),
9600, 9700 & 9800 Exit Z Trim w/08 or 11 Functions
dormakaba 9600, 9700 & 9800 Exit
Z Trim w/09 or 12 Functions
(Not available in SFIC)
D900 C Only;
Schlage Style Clover (L)
32
D900 D Only
.565"
.723"
.775"
.741"
.721"
.650"
.605"
.733"
.725"
CD
    
    
Conventional Cams (Suffix D) have
mounting holes at  and  o'clock.
SFIC/LFIC Cams (Suffix C) have mounting
screw holes at  and  oclock.
Part# Description U/M List $
 Cam screws, DORMA I/C mortise housing (used with "C" suffix cams) – pack of  pack 
 Cam screws, DORMA standard mortise cylinder (used with "D" suffix cams) – pack of  pack 
Cylinders, Keys, and Keying
66 Architectural Hardware Price List #28
Mortise Cylinders
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Surface
Closers
Locks
Architectural
Pulls & Handles
Service
Parts
63 11
63
Mortise Cylinder Cam —
Product Type
CR
Pattern
SG
CR — CorbinRusswin Conventional Cylinders
— Arrow and Sargent Conventional Cylinders
Cam
dormakaba M9053, 9070, 9071 (2), 9076,
9077 (2) & 9060 Insider Cylinder Mortise Locks
dormakaba M9056, 9080EL/EU, 9080ELRX/EURX
9082EL/EU & M9900 Mortise Locks w/Dead Bolts 11
12
13
091
dormakaba M9060 Outside Cylinder Mortise Locks;
dormakaba 9600, 9700 & 9800
Exit Z Trim w/08 or 11 Functions
dormakaba 9600, 9700 & 9800 Exit
Z Trim w/09 or 12 Functions
1. 09 cam required for dormakaba
Z09 & Z12 exit trim. For this,
or any other application not shown,
contact Technical Services.
64 J
64
Mortise Cylinder Ring —
Product Type
626
— Bright Brass
— Satin Brass
— Satin Bronze
— Satin Black
— Bright Chrome
— Satin Chrome
Finish
605
606
Dark Oxidized Satin Bronze
625
613
622
612
626
630 Satin Stainless
(also for use with 619)
G
K
Cylinder Ring
D
C— 1/8" Blocking Ring
— 1/4" Blocking Ring
A
J
H
— 9/32" Tapered Ring raises cylinder 3/32" off door
7/16" Tapered Ring raises cylinder 1/4" off door
17/32" Tapered Ring raises cylinder 7/16" off door
11/16" Tapered Ring raises cylinder 1/2" off door
13/16" Tapered Ring raises cylinder 5/8" off door
Retrofit Mortise Cylinder Cams
Ordering Guide for other manufacturers’ cylinders when used
in M9000 Series Locks
CRSG
Retrofit cams are configured to fit
non-dormakaba cylinders. Use of
incorrect cams can cause lockouts.
Description List $
Cams — CR, CR, CR
Cams — SG, SG, SG
NOTE: Cams, conventional sold in multiples of  only unless indicated otherwise.
Mortise Cylinder Rings
Ordering Guide

, ,
, ,
, 
Description List $
Blocking rings — C, D
Tapered rings — A, J, K (includes wave washer)  
Tapered rings — G, H (includes wave washer)  
Wave washer (sold in multiples of  only)  each
Example: J 
Cylinder with
Tapered Ring
Cylinder with
Blocking Ring
Cylinders, Keys, and Keying
67
Architectural Hardware Price List #28
Mortise Cylinders
80 R
R
Cylinder
Ring
40
40
30
Long
Horizontal
Tailpiece
80 Conventional
Rim
Cylinder Type
SC
Standard Ring
KD
Keying
626
KA2
KD
— 0-Bitted (Pinned 1 Bit, Uncut Keys)
NSK
605
— Satin Chrome
— Bright Chrome
— Satin Bronze
— Satin Brass
— Bright Brass
Finish
612
613
625
626
606
Dark Oxidized Satin
Satin Bronze
20
10
Long
Vertical
AA
SC — Schlage C
— Schlage E
Keyway
CD
CC
CB
CA
CE
SF
GA
RB
RA
YG
YA
— Arrow A
— Corbin 60
— Corbin 67
— Corbin 77
— Corbin 59A1
— Russwin D1
— Sargent LA
— Schlage F
— Yale 8
— Yale GA
Retrofit Keyways
Available 0-Bitted Only
MKD
SE
D100
CMK
DORMA SKC
0BIT
Keyed Alike,
Sets of 2
Construction
Master Keyed
CorbinRusswin L4 —
Russwin 981 —
— Horizontal
Vertical
Keyed
Different
Keyed Alike,
Sets of 3 or More
Master
Keyed
630 Satin Stainless
(also for use with 619)
Conventional (Non-IC) Rim Cylinders
Ordering Guide
Keys Ordered Separately for MKD, CMK, and SKC
Part # Description List $
 Cut key — change key, master key, construction key; SC, SE keyway
 Cut key — change key, master key, construction key; SKC sections — D etc. 
 -bit cut key for operating -bit cylinders; SC keyways only
Option Keyway Example Keys All Finishes $
KD (standard)/KA/KA SC R SC  KD  keys ea. 
NSK (KA other than KA/KA) SC R SC  NSK KA  keys ea. Add 
Master keyed SC, SE, D R SC  MKD Keys sold separately Add 
Construction master keyed SC, SE, D R SC  CMK Keys sold separately Add 
-Bit SC, SE R SC  BIT  keys ea. 
-Bit D R D  BIT Keys sold separately 
-Bit Retro R RB  BIT  keys ea. 
NOTES:
D100 keyway cylinders must be ordered 0-bitted or MKD; keys sold separately.
Other restrictions apply. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate cylinder. SC and SE keyways only.
Denotes keys must be ordered separately.
Cylinders, Keys, and Keying
68 Architectural Hardware Price List #28
Rim Cylinders
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Surface
Closers
Locks
Architectural
Pulls & Handles
Service
Parts
Small Format Interchangeable Core Rim Housings
Ordering Guide
87 R
R
Cylinder Ring
40
40
30
Tailpiece
Standard Ring
626
20
10
87
Cylinder Type
86
Long
Horizontal
Long
Vertical
Horizontal
Vertical
605
— Satin Bronze
— Satin Brass
— Bright Brass
Finish
612
613
625
626
606
Dark Oxidized
Satin Bronze
w/6-pin
Core
w/7-pin
Core
Satin Chrome
Bright Chrome
630 Satin Stainless
(also for use with 619)
Description Example All Finishes $
Housing less core R   
NOTES:To order cores, refer to page .
Cylinders, Keys, and Keying
69
Architectural Hardware Price List #28
Rim Cylinders
12
AA
SC
CB
CA
SE
D100
CD
CE
70
70
Lever Designs —
Knob Designs —
Lock Type
SC KD
Keying
71
626
606
Satin Brass —
Satin Chrome —
Finish
626
KA2
KD
— 0-Bitted (SC keyway only 1-bitted, Uncut Keys)
— Construction Master Keyed
— Master Keyed
Keyed Alike, Sets of 3 or More
Keyed Alike, Sets of 2
Keyed Different
NSK
MKD
— Schlage E
— Schlage C
Keyway
SF
GA
RB
RA
YG
YA
— Yale GA
— Yale 8
— Schlage F
— Sargent LA
— Russwin D1
— Russwin 981
Retrofit Keyways
Available 0-Bitted Only
CMK
DORMA SKC
Tailpiece
R08 Trim
CL700 Levers
0BIT
C873 Lever Only —
D860 & 863 1-13/16"–3" Door —
C570
C550, 553, 555, 580 —
D862 1-13/16"–2" Door
D862 1-3/8"–1-3/4" Door —
D860 & 863 1-3/8"–2" Door —
D861 —
DB662 —
DB660 —
CK700 Knobs — 12
13
16
17
18
19
20
21
24
25
— CorbinRusswin L4
— Corbin 59A1
26
27
CC — Corbin 77
— Corbin 67
— Corbin 60
— Arrow A
28
30
32
33
All C800 Levers
except C873 & 885
D880
C353 & J353 Lower Cylinder
J300 Upper Cylinder
Conventional (Non-IC) Key-in-Knob/Lever Cylinders
Ordering Guide (Except Hotel Function)
Keys Ordered Separately for MKD, CMK, and SKC
Part # Description List $
 Cut key — change key, master key, construction key; SC, SE keyway
 Cut key — change key, master key, construction key; SKC sections — D etc. 
 -bit cut key for operating -bit cylinders
NOTE: For locksets in , , , , and  finish, order cylinders in . For locksets in , , , and , order in .
Option Keyway Example Keys All Finishes $
KD (standard)/KA SC  SC  KD keys ea.  keys ea. 
NSK (keyed alike, sets of  or more) SC  SC  NSK KA  keys ea. Add 
Master keyed SC, SE, D  SC  MKD Keys sold separately Add 
Construction master keyed SC, SE, D  SC  CMK Keys sold separately Add 
-Bit SC, SE  SC  BIT  keys ea. 
-Bit D  D  BIT Keys sold separately 
-Bit Retro  RB  BIT  keys ea. 
NOTES:
D100 keyway cylinders must be ordered 0-bitted or MKD; keys sold separately.
Other restrictions apply. See Cylinders, Keys & Keying section for DORMA SKC policies.
1-bit cylinder comes with (2) uncut keys and will require a 1-bit cut key, sold separately, to operate cylinder. SC and SE keyways only.
NOTE: To order tailpiece only, refer to page .
Denotes keys must be ordered separately.
Cylinders, Keys, and Keying
70 Architectural Hardware Price List #28
Key-in-Knob/ Lever Cylinders
Cylinders,
Keys & Keying
Exit Devices
Electronic
Access Control
Components
Low Energy
Operators
Fire/Life
Safety
Concealed
Closers/Pivots
Stops/
Holders
Sliding
Systems
Surface
Closers
Locks
Architectural
Pulls & Handles
Service
Parts
75
85
85
885
Tail Piece
75
Hotel KIL
Cylinder Type
SC MKD
Keying
626
606
— Satin Chrome
— Satin Brass
Finish
626
— 0-Bitted (Pinned 1 Bit, Uncut
Keys)
— Master Keyed
SC — Schlage C
— Schlage E
Keyway
SE
0BIT
MKD
CMK Construction
Master Keyed
Conventional (Non-IC) Hotel Cylinders
Ordering Guide
Description Example All Finishes $
Key-in-Lever Cylinders
Key-in-lever hotel cylinder  SC  BIT 
Key-in-lever master keyed cylinder — Keys sold separately  SC  MKD Add 
Key-in-lever construction keyed cylinder — Keys sold separately  SC  CMK Add 
NOTES:
For key-in-lever locksets in 619, 625, and 626 finish, order cylinders in 626. For key-in-lever locksets in 605, 606, 612, and 613, order in 606.
Key-in-lever hotel cylinders are not available in D100 keyway.
Denotes keys must be ordered separately.
Keys Ordered Separately for MKD and CMK cylinders
Part # Description List $
 Cut key — change key, master key, construction key; SC, SE keyway
 Cut key — change key, master key, construction key; SKC sections — D etc. 
 Cut key — emergency key CYL; SC, SE keyway 
NOTES:
D keyway cylinders must be ordered -bitted or MKD; keys sold separately.
Other restrictions apply. See Cylinders, Keys & Keying section for DORMA SKC policies.
Cylinders, Keys, and Keying
71
Architectural Hardware Price List #28
Hotel Cylinders
98 X11
98
Hotel SFIC Mortise —
Cylinder Type
158 626
— Bright Brass
— Satin Brass
— Satin Bronze
— Bright Chrome
— Satin Chrome
Finish