Dorman DORM07 315 MHz KEYFOB TRANSMITTER User Manual PQTDORM05 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	2058809
Application ID	eRSfZXw6y319KzfmyPvY7w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.22kB (52740 bits)
Date Submitted	2013-08-30 00:00:00
Date Available	2013-08-30 00:00:00
Creation Date	2013-08-13 14:55:18
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2013-08-14 14:07:52
Document Title	Microsoft Word - PQTDORM05 UserMan
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mmunley

ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
Programming Instructions:
1) Turn vehicle ignition key to ON position, without starting engine (Key-On Engine-Off - Position "1").
2) Insert Programmer into OBD connector DLC port (
- located under steering column, near pedals). Green LED should turn
on. If Green LED is not on, you may remove the Programmer and try again.
3) A Buzzer sounds for 1 second Indicating ready state for learning sequence - Press the LOCK and UNLOCK button simultaneously
on the Key-Fob to be learnt until a Buzzer sounds for 1 second (It takes around ten seconds to configure a Key fob).
4) Configure all additional remotes, by repeating step 3.
5) When all Key fobs are done, simply turn ignition key off and check each Key fob functions properly. Remove Programmer from
Vehicles OBD port.
FCC WARNING
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by Dorman Products Inc. could void the user’s authority to operate the equipment.
IC WARNING
The term IC before the Certification/Registration number only signifies that the Industry Canada technical specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference
including interference that may cause undesired operation of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : mmunley
Create Date                     : 2013:08:13 14:55:18Z
Modify Date                     : 2013:08:14 14:07:52-04:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : mmunley
Title                           : Microsoft Word - PQTDORM05 UserMan
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:08:14 14:07:52-04:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:6cc904ae-604c-4473-8cf1-1404c2bad93d
Instance ID                     : uuid:344ad796-642f-4488-9dfd-b2ffb57af1c6
Page Count                      : 1

EXIF Metadata provided by EXIF.tools