Dorman DORM08 315 MHz Keyfob Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2426450
Application ID	6Cg3V74iBIQRDo+MIx4SlA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.89kB (223568 bits)
Date Submitted	2014-10-24 00:00:00
Date Available	2014-10-24 00:00:00
Creation Date	2014-08-19 10:55:04
Producing Software	Microsoft® Word 2010
Document Lastmod	2014-08-19 10:55:04
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Kevin Dunleavy

ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
1. Close all doors
2. Insert key into ignition
3. Hold down the power UNLOCK button on the driver's door panel, continue to hold down
until instructed to release in step 9.
4. Perform steps 5 through 8 in rapid succession.
5. Turn the ignition to the ON position (as far as you can go without starting the engine.)
6. Turn the ignition to the OFF position.
7. Turn the ignition to the ON position
8. Turn the ignition to the OFF position.
9. Release the power UNLOCK button on the door panel. Vehicle will cycle door locks if vehicle entered
programming mode
10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and
unlock. This may take up to 30 seconds.
11. Repeat step 10 NOW for each additional remote. (Including any existing remotes).
12. Turn the ignition to the ON position to exit the programming mode.
FCC WARNING
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Dorman Products Inc. could void the user’s authority to
operate the equipment.
IC WARNING
The term IC before the Certification/Registration number only signifies that the Industry Canada technical
specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference including interference that may cause undesired operation of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Kevin Dunleavy
Creator                         : Microsoft® Word 2010
Create Date                     : 2014:08:19 10:55:04-04:00
Modify Date                     : 2014:08:19 10:55:04-04:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools