Dorman DORM09 315 MHz Keyfob Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2977294
Application ID	lwsMMzED2D56itieO19P1Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.72kB (234055 bits)
Date Submitted	2016-05-02 00:00:00
Date Available	2016-05-02 00:00:00
Creation Date	2016-03-03 11:10:23
Document Lastmod	2016-03-03 11:10:23
Document Title	Users Manual
Document Author:	Brandon Graver

ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
Programming Instructions:
1) Turn vehicle ignition key to ON position, without starting engine (Key-On Engine-Off - Position "1").
2) Insert Programmer into OBD / DLC port
- located under steering column, near pedals.
3) A Chime sounds for 1 second Indicating programming mode is active.
4) Press the LOCK & UNLOCK buttons on the Key-Fob simultaneously for 5 seconds. Press the UNLOCK button for 2 seconds.
5) Repeat step 4 for all additional remotes.
6) When all Key fobs have been programmed, turn ignition key off and remove programmer from the OBD / DLC port.
7) Wait 2 minutes and verify each Key fob functions properly. If programming was unsuccessful, restart the procedure.
FCC WARNING
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by Dorman Products Inc. could void the user’s authority to operate the equipment.
IC WARNING
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:
(1)
This device may not cause interference; and
(2)
This device must accept any interference, including interference that may cause undesired operation of the device.
FVIN: 6313778IC
ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne peut causer des interférences; et
(2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent entraîner un mauvais fonctionnement de l'appareil.
FVIN: 6313778IC

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Brandon Graver
Creator                         : Microsoft® Word 2010
Create Date                     : 2016:03:03 11:10:23-05:00
Modify Date                     : 2016:03:03 11:10:23-05:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools