Dorman DORM19 315 MHz Keyfob Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3256840
Application ID	rv0gtyI6cN+gbwIU8gi8Cw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.77kB (297080 bits)
Date Submitted	2017-01-12 00:00:00
Date Available	2017-01-12 00:00:00
Creation Date	2016-12-14 16:37:13
Producing Software	Microsoft® Word 2010
Document Lastmod	2016-12-14 16:37:13
Document Title	Users Manual
Document Creator	Microsoft® Word 2010
Document Author:	Kevin Dunleavy

ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
Programming Instructions:
1) Turn vehicle ignition key to ON position, without starting engine (Key-On Engine-Off - Position "1").
2) Insert Programmer into OBD connector DLC port (
- located under steering column, near pedals). Green LED should turn
on. If Green LED is not on, you may remove the Programmer and try again.
3) A Buzzer sounds for 1 second Indicating ready state for learning sequence - Press the LOCK and UNLOCK button simultaneously
on the Key-Fob to be learnt until a Buzzer sounds for 1 second (It takes around ten seconds to configure a Key fob).
4) Configure all additional remotes, by repeating step 3.
5) When all Key fobs are done, simply turn ignition key off and check each Key fob functions properly. Remove Programmer from
Vehicles OBD port.
FCC WARNING
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by Dorman Products Inc. could void the user’s authority to operate the equipment.
IC WARNING
FVIN 63199102IC
63113783IC
The term IC before the Certification/Registration number only signifies that the Industry Canada technical specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference
including interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne peut causer des interférences; et
(2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent entraîner un mauvais fonctionnement de l'appareil

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-US
Author                          : Kevin Dunleavy
Creator                         : Microsoft® Word 2010
Create Date                     : 2016:12:14 16:37:13-05:00
Modify Date                     : 2016:12:14 16:37:13-05:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools