Dorman DORM29 433 MHz Keyfob Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3481242
Application ID	CaqEHs9lcsxgjm98xFohiA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.04kB (325545 bits)
Date Submitted	2017-07-25 00:00:00
Date Available	2017-07-25 00:00:00
Creation Date	2017-07-11 09:50:59
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-07-11 09:58:38
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Kevin Dunleavy

ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
Programming Instructions:
1) Begin in the car with all doors and trunk closed.
2) Turn the key to the ON position (II) but do not crank engine, turn until the dash lights come on then within 5 seconds pr ess the lock
button on the remote for 1 second and release the button.
3) Turn the key to the OFF position, marked by "I" on the ignition bezel - dash lights go off.
4) Repeat steps 2 & 3 three more times (A total of 4 times) - each step must be done within 5 seconds of the previous step.
5) Upon the 4th turning of the key to "ON" press the lock button on one remote, the locks will make a cycling sound. Locks will
NOT lock or unlock at this point, The system is now in the programming mode. Do not turn the key off.
6) Within 5 seconds of entering programming mode and within 5 seconds of each other, press the lock button ON EACH remote you ar e programming, for a
second or so and release. This step needs to be completed within 10 seconds. Each time a remote button is pushed, the locks should cycle. Up to 3 remotes can
be programmed.
7) Turn ignition completely off and remove the key. Step out of the car and close door. The Remotes should be programmed
and should work. If you have a trunk/hatch release, the button for this feature needs to be held for a few seconds before the trunk/hatch will pop.
FCC WARNING
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly
approved by Dorman Products Inc. could void the user’s authority to operate the equipment.
FCC Part 15.21: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
IC WARNING
FVIN 63999370IC
The term IC before the Certification/Registration number only signifies that the Industry Canada technical specificati ons were met. This device
complies with Industry Canada’s license-exempt RSSs Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation e st autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Kevin Dunleavy
Create Date                     : 2017:07:11 09:50:59-04:00
Modify Date                     : 2017:07:11 09:58:38-04:00
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Kevin Dunleavy
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2017:07:11 09:58:38-04:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:1b5c025a-3239-4bbc-b2ca-21442427fa3b
Instance ID                     : uuid:36c74b0a-06c4-48ab-8b79-d1871a947474
Page Count                      : 1

EXIF Metadata provided by EXIF.tools