Dorman DORM33 315 MHz Keyfob Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3273612
Application ID	xZjXz6N7FME4juvZZ/L/Kw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.58kB (294795 bits)
Date Submitted	2017-01-31 00:00:00
Date Available	2017-01-31 00:00:00
Creation Date	2017-01-13 12:54:00
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-01-13 14:17:13
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Kevin Dunleavy

ALL KEY FOBS MUST BE PRESENT AND REPROGRAMMED WHEN PROGRAMMING NEW FOBS
Programming Instructions:
1) Turn vehicle ignition key to ON position, without starting engine (Key-On Engine-Off - Position "1").
2) Insert Programmer into OBD connector DLC port (
- located under steering column, near pedals). Green LED should turn
on. If Green LED is not on, you may remove the Programmer and try again.
3) A Buzzer sounds for 1 second Indicating ready state for learning sequence - Press the LOCK and UNLOCK button simultaneously
on the Key-Fob to be learnt until a Buzzer sounds for 1 second (It takes around ten seconds to configure a Key fob).
4) Configure all additional remotes, by repeating step 3.
5) When all Key fobs are done, simply turn ignition key off and check each Key fob functions properly. Remove Programmer from
Vehicles OBD port.
FCC WARNING
Statement 15.19(a)(3): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by Dorman Products Inc. could void the user’s authority to operate the equipment.
IC WARNING
63999350IC
The term IC before the Certification/Registration number only signifies that the Industry Canada technical specifications were met.
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Cet appareil est conforme aux RSSs exempts de licence d'Industrie Canada.
Le fonctionnement est Suivant deux conditions:
(1) Cet appareil ne doit pas causer d'interférences; Et
(2) Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent Fonctionnement du dispositif.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Kevin Dunleavy
Create Date                     : 2017:01:13 12:54:00-05:00
Modify Date                     : 2017:01:13 14:17:13-05:00
Has XFA                         : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Kevin Dunleavy
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2017:01:13 14:17:13-05:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:605ff099-b73a-4ef5-9691-8f23cd44c878
Instance ID                     : uuid:28bef63e-a255-4874-8aa5-090577a75f40
Page Count                      : 1

EXIF Metadata provided by EXIF.tools