Doro DORO622 GSM/WCDMA Mobile Telephone User Manual

Doro AB GSM/WCDMA Mobile Telephone

User manual

Download: Doro DORO622 GSM/WCDMA Mobile Telephone User Manual
Mirror Download [FCC.gov]Doro DORO622 GSM/WCDMA Mobile Telephone User Manual
Document ID2247961
Application IDO6xF8uoVhZJfeeLqP1MyMg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize335.22kB (4190267 bits)
Date Submitted2014-04-22 00:00:00
Date Available2014-10-19 00:00:00
Creation Date2017-10-23 03:37:42
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-23 03:37:42
Document TitleUser manual
Document CreatorArbortext Publishing Engine

Doro PhoneEasy 622
®
English
English
1. Earpiece
2. Display
3. Arrow buttons
4. Left selection button
5. Call button
6. Speed dials
7. Voice mail
8. Input method/Silent
9. Camera shortcut
10. Message shortcut
11. Volume control
12. End call/Power on/off
13. Microphone
14. Right selection button
15.
16.
17.
18.
19.
20.
21.
22.
Charging socket
Headset socket
Assistance button
Camera lens
Flash
External display
Loudspeaker
Green light = New message
/ Missed call
23. Red light = Battery level low
/ Charging
24. Charging stand
25. Lanyard
The items supplied with your phone might vary depending on the software and accessories available in your region or offered by your service
provider. You can obtain additional accessories from your local Doro dealer. The supplied accessories provide the best performance with your
phone.
English
Contents
Installation ..................................................................................................... 1
Install the SIM card, memory card and the battery ............................ 1
Charging......................................................................................................... 2
Get to know your phone ................................................................................ 3
Assistive functions................................................................................. 3
Turn the phone on and off .................................................................... 3
Phone indicators ................................................................................... 4
External display ..................................................................................... 4
Navigate the phone ............................................................................... 4
Entering text
..................................................................................... 5
Doro Experience & Doro Experience Manager.................................. 6
Call functions................................................................................................. 6
Make a call............................................................................................. 6
Call from the phonebook ...................................................................... 7
Receive a call......................................................................................... 7
Volume control....................................................................................... 7
Hearing aid compatible......................................................................... 7
Call options ............................................................................................ 8
Call waiting............................................................................................. 9
Call information ..................................................................................... 9
Speed dial
........................................................................................ 9
Silent ...................................................................................................... 9
Headset.................................................................................................. 9
SOS calls .............................................................................................. 10
Assistance button ........................................................................... 10
Phonebook...................................................................................................11
Add contact..........................................................................................11
Create ICE contact (In Case of Emergency) ..................................12
Manage phonebook contacts.............................................................12
Owner number.....................................................................................13
ICE (In Case of Emergency) ....................................................................13
Messages..................................................................................................... 14
Create and send text message (SMS) ............................................... 14
Create and send picture message (MMS) .........................................15
Create and send a voice message ..................................................... 16
Inbox, Outbox and Sent....................................................................... 16
®
®
English
Call log.......................................................................................................... 17
Retrieve and dial ................................................................................. 17
Camera.........................................................................................................18
Camera (take photos) .........................................................................18
Video camera.......................................................................................18
Picture gallery and Video gallery ........................................................19
Connect the phone to a computer .............................................................20
Drag and drop content between phone and a computer .................20
Disconnect the USB cable safely........................................................20
Settings ........................................................................................................ 21
General................................................................................................. 21
Sound ................................................................................................... 24
Display..................................................................................................26
Doro Experience ................................................................................. 27
Weather................................................................................................29
Calls......................................................................................................29
Messages.............................................................................................33
Camera.................................................................................................36
Assistance ....................................................................................... 37
Connectivity .........................................................................................39
Security ................................................................................................ 41
File manager........................................................................................43
Additional functions ....................................................................................44
Organizer..............................................................................................44
More .....................................................................................................46
Status ...................................................................................................49
Weather................................................................................................49
Instructions for the REMOTE USER ....................................................49
Troubleshooting ...........................................................................................52
Safety instructions.......................................................................................54
Network services and costs................................................................54
Operating environment .......................................................................54
Medical units .......................................................................................55
Areas with explosion risk ....................................................................55
Li-ion battery ........................................................................................55
Protect your hearing ............................................................................56
Emergency calls...................................................................................56
Vehicles................................................................................................56
®
English
Care and maintenance ............................................................................... 57
Warranty....................................................................................................... 57
Specifications .............................................................................................. 57
Hearing aid ..........................................................................................58
Specific Absorption Rate (SAR) ..........................................................58
Declaration of Conformity ...................................................................58
FCC/IC ..........................................................................................................58
Disclaimer and Limitation of Liability.................................................58
FCC/Industry Canada notice ..............................................................59
RF exposure information (SAR) ..........................................................59
English
Installation
IMPORTANT!
Turn off the phone and disconnect the charger before removing the
battery cover.
Install the SIM card, memory card and the battery
The SIM and memory card holder’s are located inside the battery
compartment.
1.
2.
3.
4.
5.
Remove the battery cover and the battery if it is already installed.
Optional: Insert the memory card into the slot under the SIM card
holder. Make sure that the memory card contacts are facing upwards and push the card in, until you hear a click. Take care not to
scratch or bend the contacts on the card. To remove or replace the
card, push the card in until you hear a click and then pull the card
out.
Insert the SIM card by gently sliding it into the holder. Make sure
that the SIM card’s contacts are facing down and that the cut off corner is pointing out. Take care not to scratch or bend the contacts on
the SIM card.
Insert the battery by sliding it into the battery compartment with the
contacts facing downwards to the right.
Replace the battery cover.
English
IMPORTANT!
Use only compatible memory cards for use with this device. Compatible
card type: microSD, microSDHC.
Incompatible cards may damage the card itself, the device and corrupt
data stored on the card. Depending on the market some phones may
have a pre-installed memory card.
Charging
CAUTION
Only use batteries, charger and accessories that have been approved
for use with this particular model. Connecting other accessories may
be dangerous and may invalidate the phones type approval and
guarantee.
When the battery is running low,
is displayed and a warning signal is
heard. To charge the battery, connect the mains adapter to a wall socket
and to the charging socket y.
When the charger is connected to the phone,
is displayed briefly,
and
when it is disconnected. The battery charge indicator will be animated while charging. It takes approximately 3 hours to fully charge the
battery.
When charging is completed,
is displayed on the screen. If the phone
is turned off when the charger is connected to the phone only the battery
charge indicator will be shown on the display.
Note! To save power the LCD backlight goes off after a while. Press any
button to illuminate the display. Full battery capacity will not be reached
until the battery has been charged 3–4 times. Batteries degrade over
time, which means that call time and standby time will normally
decrease with regular use.
Save energy
When you have fully charged the battery and disconnected the charger
from the device, unplug the charger from the wall outlet.
English
Get to know your phone
Assistive functions
The following symbols indicate information in the manual about assistive
functions for:
Seeing
Handling
Hearing
Safety
Turn the phone on and off
Press and hold the red button
firm with Yes to power off.
on the phone to turn it on/off. Con-
If the SIM card is valid but protected with a PIN code (Personal Identification Number), PIN is displayed.
•
Enter the PIN code and press OK (
upper left corner of keypad).
Delete with Clear (
upper right corner of keypad).
Note! If PIN and PUK codes were not provided with your SIM card, please
contact your service provider.
Attempts: # shows the number of PIN attempts left. When no more attempts remain, PIN blocked is displayed. The SIM card must now be unlocked with the PUK code (Personal Unblocking Key).
1.
2.
3.
Enter the PUK code and confirm with OK.
Enter a new PIN code and confirm with OK.
Re-enter new PIN code and confirm with OK.
Start-up wizard
When starting the phone for the first time, you can use the Start-up wizard to set some basic settings.
• Press Yes to change or No if you do not want to change.
The default language is determined by the SIM card. See General, p.21
on how to change language, time and date.
Tip: You can run the Start-up wizard later if you want, see Start-up wizard,
p.22.
English
Change the language, time and date
The default language is determined by the SIM card. See General, p.21
on how to change language, time and date.
Phone indicators
Lights on the phone will:
•
•
Flash green when you have a new message or a missed call. After
reading the new message/missed call, the flashing will stop.
Flash red when the battery is running low and during charging.
External display
The external display shows the time, a number of status indicators, and
notifications for incoming calls and events. The external display can only
display characters in black and white. If the external display times out,
press and hold any of the side keys +/– to turn it back on.
Navigate the phone
Standby (idle mode)
When the phone is ready to use, and you have not keyed in any characters, the phone is in standby.
•
•
Press
to return to standby mode.
Press left selection button
to access the phone Menu or right
selection button Name to access your saved contacts in the
phonebook.
Tip: You can always press
to return to standby.
Scroll
•
Use the arrow buttons
to scroll in menus.
Step-by-step instructions
The arrow ( ) indicates next action in step-by-step instructions. To confirm an action, press OK. To select an item, scroll or highlight the item using / and then press OK.
Example:
•
Press Menu
Phonebook
-New contact-
Add.
English
To perform the example on your Doro PhoneEasy 622 you should do the
following:
®
1.
2.
Press Menu, scroll to Phonebook and press OK.
Select -New contact- and press Add.
Entering text
Entering text manually
Select character
• Press a numerical key repeatedly until the desired character is
shown. Wait a few seconds before entering the next character.
Special characters
1. Press * for a list of special characters.
2. Select the desired character with / and press OK to confirm.
Move the cursor within text
• Use the side keys +/– to move the cursor within the text.
Upper case, lower case and numerals
•
Press # to choose between upper case, lower case and numerals.
See Input mode, p.6.
Change input language
1.
2.
Press and hold # for a list of available languages.
Select language with / and press OK to confirm.
Entering text with predictive text
In some languages you can use the Smart ABC (eZiType™) input method
which uses a dictionary to suggest words. See Predictive text , p.33 on
how to activate predictive text.
Press each key once, even if the displayed character is not the one you
want. The dictionary will suggest words based on the keys you have
pressed. Example, to write the word “Fred”:
1.
2.
3.
Press 3, 7, 3, 3. Complete the word before looking at the
suggestions.
Use / to view the suggested words.
Press Select and continue with the next word.
Alternatively, press 0 to continue with the next word.
English
If none of the suggested words are correct, use manual input mode.
Input mode
Press # to change input mode. The icon on the top left of the display indicates the input mode.
Abc
ABC
abc
Abc
ABC
abc
123
Sentence case with predictive text
UPPER CASE with predictive text
lower case with predictive text
Sentence case
UPPER CASE
lower case
Numerals
Doro Experience & Doro Experience Manager
®
®
The web-based Doro Experience Manager (www.doroexperience.com)
enables you to remotely manage a Doro Experience phone from anywhere in the world.
®
®
•
Remotely manage reminders and important calendar events, contacts and much more.
• Take advantage of cloud-based backup and photo sharing
capabilities.
See Doro Experience , p.27 for more information and how to get started.
®
Note! You need to have Internet access to use most of the features in
Doro Experience . Depending on how you use your phone, it can use up a
lot of Internet bandwidth really quickly. Before you use your phone, we
strongly recommend that you contact your mobile operator about data
rates. Using data services while roaming can be costly. Check with your
mobile operator for data roaming rates before you use data roaming.
®
Call functions
Make a call
1.
2.
3.
Enter the phone number including the area code. Delete with Clear.
Press
to dial. Press Abort to cancel dialling.
Press
to end the call.
English
Tip: For international calls, always use + before the country code for best
operation. Press * twice for the international prefix +.
Call from the phonebook
1.
2.
3.
Press Name to open the phonebook.
Use / to scroll through the phonebook, or quick search by
pressing the key corresponding to the first letter of the entry, see Entering text , p.5.
Press Call to dial the selected entry, or press Back to return to
standby.
Receive a call
To answer an incoming call when the flip is closed, open the flip.
To answer an incoming call when you have set Open to answer to Off,
see Answer mode, p.31.
1.
2.
Open the flip and press
to answer.
Alternatively press Silent to switch off the ringsignal or press
/close the flip to reject the call directly (busy signal).
Press
to end the call.
Tip: Press and hold +/– to temporarily switch off the ringsignal without
opening the flip.
Volume control
Use the side buttons +/– to adjust the sound volume during a call. The
volume level is indicated on the display. If you use a hearing aid or have
hearing difficulties when using the telephone in a noisy environment, you
can customise the phone's audio settings, see Audio setup , p.24.
Hearing aid compatible
This telephone is hearing aid compatible. Hearing-aid compatibility is not
a guarantee that a specific hearing aid will work with a specific telephone.
Mobile telephones contain radio transmitters that may interfere with
hearing aid performance. This phone has been tested for use with hearing aids, for some of the wireless technologies that it uses, but there may
be some newer wireless technologies that have not been tested yet for
use with hearing aids. To ensure that a specific hearing aid works well
with this telephone, test them together before making a purchase.
English
The standard for hearing aid compatibility contains two types of ratings:
•
M: To use your hearing aid in this mode, make sure that your hearing
aid is set to "M-mode" or acoustic coupling mode, and position the
telephones receiver near the hearing aid’s built-in microphone. For
the best results, try using the telephone in different positions relative to your hearing aid—for example, placing the receiver slightly
above the ear may result in better performance for hearing aids with
microphones positioned behind the ear.
• T: To use your hearing aid in this mode, make sure that your hearing
aid is set to "T-mode" or telecoil coupling mode (not all hearing aids
have this mode). For the best results, try using the telephone in different positions relative to your hearing aid—for example, placing the
receiver slightly below or in front of the ear may result in better
performance.
See also Audio setup , p.24 on how you can customise the telephones
audio settings.
Call options
During a call the selection buttons1 (
functions.
) give access to additional
Options (left selection button)
•
•
•
•
•
•
Hold single call/Retrieve single to hold/retrieve the current call.
End single call to end the current call (same as
).
New call to call another number (Conference).
Phonebook to search the phonebook.
Messages to write or read text messages.
Mute to disable the microphone.
SPK on (right selection button)
The loudspeaker allows you to speak without holding the phone closely
to the ear.
•
SPK on to activate and speak clearly into the phone microphone at
a maximum distance of 1 m. Use the side keys +/– to adjust the
loudspeaker volume.
1. Selection buttons have multiple functions. The current key function is
shown above the selection button on the display.
English
•
SPK off to return to normal mode.
Note! Loud background noises (music, etc.) may interfere with the sound
quality.
Call waiting
An alert tone is heard if there is an incoming call while talking.
To put the current call on hold and answer the incoming call:
•
Press Options
Answer.
Tip: Call waiting must be activated, see Call setup, p.31.
Call information
During a call, the outgoing or incoming phone number and the elapsed
call time is displayed. If the identity of the caller is withheld, Unknown is
displayed.
Speed dial
Use A–B, 0 and 2–9 to speed dial an entry from standby.
•
Press and hold the corresponding key. See Speed dial
, p.30.
Silent
Silent is a fixed profile with Keypad tone, Message tone and Ringtone disabled, while Vibration, Tasks, Daily reminder and Alarm are unchanged.
•
Press and hold shortcut button # to activate/deactivate Silent
mode.
Headset
When a headset is connected, the internal microphone in the phone is
automatically disconnected. If available, use the answer key on the headset to answer and end calls.
CAUTION
Using a headset at high volume may damage your hearing. Adjust the
volume level carefully when using a headset.
English
SOS calls
As long as the phone is switched on, it is always possible to place an SOS
call by entering the main local emergency number for your present loca.
tion followed by
Some networks accept calls to emergency numbers without a valid SIM
card. Contact your service provider for more information.
Assistance button
IMPORTANT!
Always inform recipients in the Number list that they are listed as your
assistance contacts.
CAUTION
When an assistance call is activated the phone is pre-set to handsfree/
speakerphone mode. Do not hold the device near your ear when the
handsfree mode is in use, because the volume may be extremely loud.
The assistance button allows easy access to contact your predefined help
numbers (Number list) should you need help. The assistance function
may need to be activated before use. See Assistance , p.37 on how to
activate as described or with 3 button presses, how to enter recipients in
the numbers list and how to edit the text message.
•
•
•
•
Press and hold the assistance button for 3 seconds, or press it twice
within 1 second. The assistance call begins after a delay of 5 seconds. In this time you can prevent a possible false alarm by pressing
An assistance text message (SMS) is sent to all recipients.
The first recipient in the list is dialled. If the call is not answered
within 25 seconds, the next number is dialled. Dialling is repeated 3
times or until the call is answered, or until
is pressed.
The assistance function may be configured so that the receiver of
the call must press "0" (zero) to confirm, in order to stop the alarm
sequence. If there is a risk that the assistance call will be answered
by a voicemail/answering service, please activate the function Confirm with "0". See Confirm with "0", p.38.
10
English
Note! Some private security companies can accept automatic calls from
their clients. Always contact the security company before using their
phone number.
IMPORTANT!
Information to the receiver of an assistance call, when Confirm with "0"
is activated:
• After receiving the assistance message, each number in the
Number list will be called sequentially.
•
To confirm the assistance call, the receiver needs to press 0.
•
If the receiver doesn’t press 0 within 60 seconds (after
answering) the call will be disconnected and the next number in
the sequence will be called.
If the receiver presses 0 within 60 seconds, the call is confirmed
and no further call attempts will be made (assistance sequence
interrupted).
•
Phonebook
The
phonebook can store 500 entries with 3 phone numbers in
each entry.
Add contact
1.
2.
Press Menu
Phonebook
-New contactAdd.
Enter a
Name for the contact, see Entering text , p.5. Delete
with Clear.
3.
Use / to select Mobile,
Home or
Office and enter the
phone number(s) including the area code.
Select None
Edit to associate a picture to the contact.
This picture will be displayed when the corresponding contact is calling you and may also be visible in the phonebook, see Phonebook
picture, p.24.
• Take picture to use the camera to take a picture.
• My pictures to select an existing picture.
Press Save.
4.
5.
11
English
Tip: For international calls, always use + before the country code for best
operation. Press * twice for the international prefix +.
Create ICE contact (In Case of Emergency)
With additional information and medical information, first responders
can access information from the victim's phone in case of emergency. In
the event of a trauma, it is critical to have this information as early as
possible which can increase the chances of survival. All fields are optional, but the more information provided the better. See ICE (In Case of
Emergency) , p.13 on how to configure your ICE information.
Manage phonebook contacts
1.
2.
Press Menu
Phonebook.
Select a contact, then press Options:
• View to show details for the selected contact.
• Edit to edit the contact. Use / to scroll. Delete with Clear.
Press Save when done.
• Add to add contact. See Add contact, p.11.
• Call to call the contact.
• Top 10 to set the entry as one of the first 10 contacts listed in
the phonebook. See Top 10 , p.30.
• Send SMS to create text message. See Create and send text
message (SMS), p.14.
• Send MMS to create picture message, see Create and send picture message (MMS), p.15.
• Delete to delete the selected contact. Press Yes to confirm or
No to abort.
• Delete all
From SIM/From phone to delete all phonebook
contacts from the SIM card or phone memory. Enter the phone
code and press OK to confirm. The default phone code is 1234.
• Copy all
From SIM to copy all phonebook contacts from the
SIM card to the phone memory. Press Yes to confirm or No to
abort.
• Copy all
From phone to copy all phonebook entries from the
phone memory to the SIM card. Press Yes to confirm or No to
abort.
12
English
•
Send vCard
Send by SMS to send the selected phonebook
contact as a vCard via text message. Enter the phone number
of the recipient.
Alternatively use / to scroll through the phonebook, or
quick search by pressing the key corresponding to the first letter of the entry, see Entering text , p.5. Press OK to send.
Send by MMS to send the selected phonebook
• Send vCard
contact as a vCard via picture message. Write your message
and press Options to Add subject or Add picture. Add recipients
with To and Send when ready.
• Send vCard
Send by Bluetooth to send the selected phonebook contact as a vCard via Bluetooth . See Bluetooth , p.39.
Press OK to confirm.
®
3.
®
Owner number
The phone number assigned to your SIM card is saved as Owner number
if this is allowed by the card.
To view/edit the numbers:
•
Press Menu
Phonebook
Owner number.
ICE (In Case of Emergency)
First responders can access additional information such as medical information from the victim's phone
in case of emergency. In the event
of a trauma, it is critical to have this information as early as possible to increase the chances of survival. All fields are optional, but the more information provided the better.
1.
2.
3.
Press Menu
ICE.
Use / to scroll the list of entries.
Press Edit to add or edit information in each entry, see Entering text
, p.5. Delete with Clear.
ID
•
•
•
Name: enter your name.
Birth: enter your date of birth.
Height: enter your height.
13
English
• Weight: enter your weight.
• Address enter your home address.
• Language: enter your preferred language.
• Insurance: enter your insurance provider and policy number.
Contact 1:, Contact 2: and Doctor:
•
Press Options to Add or Delete a contact from the phonebook,
or Save to accept the current entry.
If possible, add your relationship to your ICE contacts in the
phonebook, such as “ICE Wife Mary Smith”.
Important info.
•
4.
Condition: enter any medical conditions/medical devices (e.g.
diabetic, pacemaker).
• Allergies: enter any known allergies (e.g. penicillin, bee stings).
• Blood type: enter your blood type.
• Vaccination: enter any relevant vaccination.
• Medication: enter any medication that you are treated with.
• Other info: enter other information (e.g. organ donor, living will,
consent to treat).
Press Save when done.
Messages
You can create and send text messages (SMS), picture messages (MMS)
Messages menu.
and voice messages using the
Create and send text message (SMS)
Note! Before you can send any text messages, you need to save your
message centre number. The number to your service centre is supplied
by your service provider and is usually set on the SIM card. If not, you can
enter the number yourself. See SMS centre, p.34.
1.
2.
3.
4.
Press shortcut button .
Alternatively press Menu
Messages.
Select Create new
SMS.
Write your message, see Entering text , p.5, then press To.
Select a recipient from Phonebook.
14
English
5.
6.
Alternatively, select Enter number to add recipient manually and
press Done.
Press Add to add more recipients.
You can modify the recipients by selecting one, press Options
Edit/Delete/Delete all.
Press Send to send.
Note! If you choose to add multiple recipients, you will be charged for
each recipient (maximum 10). For international calls, always use +
before the country code for best operation. Press * twice for the
international prefix +.
Create and send picture message (MMS)
A picture message can contain text and media objects such as pictures,
sound recordings and video. Both you and the recipient must have subscriptions that support picture message. The settings for picture message are supplied by your service provider and can be sent to you
automatically via text message. If not, see MMS settings, p.34 on how to
set your MMS profile.
1.
2.
3.
4.
5.
6.
7.
8.
Press shortcut button .
Alternatively press Menu
Messages.
Select Create new
MMS.
Write your message, see Entering text , p.5.
Press Options
Add picture:
• My pictures to select a file. The picture size must be less than
600kB.
• Take picture to use the camera to take a picture.
You can also Add sound and Add video using the Options menu.
Select Add subject and enter your subject, then press Done.
Select To and select recipient from Phonebook.
Alternatively, select Enter number to add recipient manually and
press Done.
Press Add to add more recipients.
Press Send to send.
15
English
Create and send a voice message
A voice message uses the same technology as a picture message. Both
you and the recipient must have subscriptions that support picture message. The settings for picture message are supplied by your service provider and can be sent to you automatically via text message. If not, see
MMS settings, p.34 on how to set your MMS profile.
1.
2.
3.
4.
5.
6.
Press shortcut button .
Alternatively press Menu
Messages.
Voice message.
Select Create new
Recording starts immediately. Press Stop when done and press Yes
to save.
Select recipient from Phonebook.
Alternatively, select Enter number to add recipient manually and
press Done.
Press Add to add more recipients
Press Send to send.
Inbox, Outbox and Sent
1.
2.
3.
4.
Text message/Picture message unread
Text message/Picture
message sent
Text message/Picture message read
Text message/Picture
message unsent
Press shortcut button .
Alternatively press Menu
Messages.
Select Inbox, Outbox or Sent.
Select a message and press Read. Use / to scroll up/down.
Press Options:
• View (MMS only) to view the message.
• Call to call the contact.
• Resend to send again to the same receiver.
• Reply to write your reply, then press Send. The message is sent
immediately.
• Delete to delete. Press Yes to delete or No to return.
16
English
•
5.
Download/Cancel download. If the message is not downloaded
yet, press Download.
• Edit to edit the message, then press Send.
• Forward to forward the message. Edit the message (if desired),
then press Send.
• Use number to display all phone numbers contained in the
message as well as the sender's number.
• Use number
Call to call the selected number.
Save to save the number in the phonebook.
• Use number
• Use number
Send SMS to write a new text message.
Send MMS to write a new picture message.
• Use number
• Save objects (MMS only) to save text and media objects such
as pictures, sound recordings and video.
• Details (MMS only) to view details of the message.
Press OK to confirm.
Call log
Received, missed and dialled calls are saved in a combined
call log.
20 calls of each type can be stored in the log. For multiple calls related to
the same number, only the most recent call is saved.
Retrieve and dial
1.
2.
Press
Alternatively, press Menu
Use / to select:
Call log.
Received call
Dialled call
Missed call
3.
Press Options:
• View to show details for the selected call.
• Delete to delete the call.
• Delete all to delete all calls in the call log.
• Save to save the number in the phonebook.
17
English
4.
5.
Press OK to confirm.
Press
to dial.
Camera
You can take
photos, record
eos using the
videos and view your photos and vid-
Camera menu.
Camera (take photos)
To get sharp photos, wipe the lens clean with a dry cloth.
1.
2.
3.
Press shortcut button
Alternatively press Menu
Camera
Camera.
to take photo.
Press
Press Options:
• Send
Send by MMS to send as picture message. See Create
and send picture message (MMS), p.15.
• Send
Send by Bluetooth to send to a Bluetooth device, see
Bluetooth , p.39.
• Delete to delete. Press Yes to confirm or No to return.
• Use
Wallpaper to save as display background.
• Use
Phonebook picture to save as phonebook contact.
Press Back to take a new photo.
If you do not make any selection the picture is saved.
®
4.
Camera adjustments
•
•
Use / to zoom in and out.
Use the side buttons +/– to adjust EV/Light sensitivity.
Note! Zoom may reduce picture quality.
For more camera settings, see Camera, p.36.
Video camera
To get sharp videos, wipe the lens clean with a dry cloth.
1.
2.
Press Menu
Camera
Video camera.
Press
to start recording.
18
English
3.
4.
Press
to stop recording. Select Yes to save.
Press Options:
• Play
• Send
Send by MMS to send as picture message. See Create
and send picture message (MMS), p.15.
• Send
Send by Bluetooth to send to a Bluetooth device, see
Bluetooth , p.39.
• Delete to delete. Press Yes to confirm or No to return.
Press Back to return.
®
5.
Video camera adjustments
•
•
Use / to zoom in and out.
Use the side buttons +/– to adjust EV/Light sensitivity.
Note! Zoom may reduce video quality.
For more video camera settings, see Camera, p.36.
Picture gallery and Video gallery
View your saved pictures
1.
2.
3.
or videos
Press Menu
Camera
Picture gallery or Video gallery.
Use / or the side buttons +/– to select a picture or video.
Press Options:
• View for single view. Press Back to return.
Use / to play and stop the video (video only).
• Send
Send by MMS to send as picture message. See Create
and send picture message (MMS), p.15.
• Send
Send by Bluetooth to send to a Bluetooth device, see
Bluetooth , p.39.
• Delete to delete. Press Yes to confirm or No to return.
• Use (picture only)
Wallpaper to save as display background.
• Use (picture only)
Phonebook picture to save as phonebook
contact.
• Details to view detailed information about the file, e.g. date,
size, copyright.
• Rename to rename picture.
®
19
English
4.
Press OK to confirm.
Connect the phone to a computer
Connect the phone to a computer and start transferring pictures, music
and other file types. All you have to do is connect a USB cable between
the phone and computer. From your computer's file explorer, you can
drag and drop content between your phone and the computer.
Note! You might not be able to transfer some copyright protected
material.
Drag and drop content between phone and a computer
1.
2.
3.
Connect your phone to a computer using a USB cable.
Wait until the phone/memory card appears as external disks in the
file explorer.
Drag and drop selected files between the phone and the computer.
Note! When the phone/memory card is connected to the computer, the
phone cannot access the memory card. Some functionality and
applications in the phone, such as the camera, may not be accessible.
You can transfer files using a USB cable on most devices and operating
systems supporting a USB Mass Storage interface.
Disconnect the USB cable safely
1.
2.
Make sure to enable the hardware to be safely removed.
Disconnect the USB cable.
20
English
Note! Do not disconnect the USB cable when transferring content as this
may corrupt the content.
Computer instructions may vary depending on your operating system.
See the documentation of your computer's operating system for more
information.
Settings
Use the
Settings menu to personalise your Doro PhoneEasy 622.
®
General
Time & date
Set the time and date
1. Press Menu
Settings
General.
2. Select Time & date:
• Set time to enter the time (HH:MM).
• Set date to enter the date (DD/MM/YYYY).
3. Press OK to confirm.
Set the time/date format
1. Press Menu
Settings
General
Time & date.
2. Select Set format:
• Select Time format
12 hours/24 hours.
• Select Date format and select the desired date format.
3. Press OK to confirm.
Set auto time
To set the phone to automatically update the time and date according to
the current time zone, select On. Automatic update of date and time does
not change the time you have set for the alarm clock or the calendar.
They are in local time. Updating may cause some alarms you have set to
expire depending on network support and subscription.
1.
2.
3.
Press Menu
Settings
General
Time & date.
Select Auto time
On/Off to enable/disable.
Press OK to confirm.
21
English
Language
The default language for the phone menus, messages etc. is determined
by the SIM card. You can change this to any other language supported by
the phone.
1.
2.
3.
Press Menu
Settings
General
Use / to select a language.
Press OK to confirm.
Language.
Start-up wizard
Use the Start-up wizard to set some basic settings.
1.
2.
Press Menu
Settings
General
Start-up wizard.
Press Yes to change or No if you don’t want to change.
Block function
You can disable functions to simplify the use of the phone.
1.
2.
3.
Press Menu
Settings
General
Block function.
Select each function you want to disable and press Off.
Press Done to confirm.
Network setup
Your phone automatically selects your (service providers) home network
if this is within range. If not within range, you may use another network,
provided your network operator has an agreement that allows you to do
so. This is called roaming. Contact your service provider for more
information.
1. Press Menu
Settings
General
Network setup.
2. Select one of the following options and press OK to confirm:
Select network
• New search to perform new search if connection is lost.
• Select network to view available network, a list of available network
operators is displayed (after a short delay). Select desired operator.
• Network mode to select another network. Select Automatic to select
network automatically or Manual to select network manually.
Service selection
Select the type of service for your phone.
22
English
•
•
•
GSM service only
3G service only
Automatic: switch between GSM and 3G for best service.
IMPORTANT!
If you set your phone to use GSM only or 3G only, you will not be able to
make any calls, including emergency calls, or use other features
requiring a network connection, if the selected network is unavailable.
Network information
View your current network settings.
Services
This menu may contain pre-programmed services from your network provider depending on network support and subscription.
•
Press Menu
Settings
General
Services.
Torch
Set the automatic switch off time for the built in torch. See Torch, p.48.
1.
2.
3.
Press Menu
Settings
General.
Select Torch:
• 1 min to turn off automatically after 1 min.
• 2 min to turn off automatically after 2 min.
• No limit to turn of manually.
Press OK to confirm.
Note! The torch will drain the battery very quickly. Remember to turn off
the torch after use.
Phonebook storage
1.
2.
3.
Press Menu
Settings
General.
Select Phonebook storage:
• SIM to save 1 phone number per contact. Number and length
of the phone numbers/contacts that can be stored will vary depending on SIM card/service provider preferences.
• Phone to save 500 contacts with 3 phone numbers each Mobile, Home, Office or Phonebook picture.
Press OK to confirm.
23
English
Phonebook picture
You can change the phonebook view mode.
1.
2.
3.
Press Menu
Settings
General.
Select Phonebook picture:
• On to see the contacts associate picture.
• Off to display only the names of contacts.
Press OK to confirm.
Sound
Note! Silent needs to be set to Off to access Tone setup, Volume, Alert
type and Extra tone. See Silent, p.25.
Audio setup
If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment, you can customise the phones audio
settings.
1.
2.
3.
Press Menu
Settings
Sound.
Select Audio setup:
• Normal for normal hearing in normal conditions.
• Medium for mild hearing impairment or use in a noisy
environment.
• High for moderate hearing impairment or use in a very noisy
environment.
• HAC mode for use with hearing aid in the T position.
Press OK to confirm.
Tone setup
1.
2.
3.
4.
5.
Press Menu
Settings
Sound.
Select Tone setup
Ringtone.
Use / to select one of the available melodies, the melody will
be played.
Press OK to confirm or Back to discard changes.
Set up the Alarm, Message tone, Opening tone, Closing tone, Keypad tone, Power on and Power off in the same way.
24
English
Ringtone volume
1.
2.
3.
Press Menu
Settings
Sound
Volume.
Use / to change the ringtone volume.
Press OK to confirm.
Silent
1.
2.
3.
Press Menu
Settings
Sound.
On/Off to enable/disable.
Select Silent
Press OK to confirm.
Tip: Press and hold shortcut button # to activate/deactivate Silent
mode.
Alert type
Incoming calls can be signalled by a ringtone and/or vibration.
1.
2.
3.
Press Menu
Settings
Sound.
Select Alert type:
• Ring only for ringtone only.
• Vib. only for vibration only.
• Vib. and ring for vibration and ringtone.
• Vib. then ring to start with vibration and adds ringtone after a
short while.
• Silent for no sound or vibration, the display light is lit.
Press OK to confirm.
Extra tone
Warning and error tones are used to alert you of low battery power,
phone and SIM card errors etc.
1.
2.
3.
4.
Press Menu
Settings
Sound
Extra tone.
Select Warning
On/Off to enable/disable.
Select Error
On/Off to enable/disable.
Press Done to save.
25
English
Display
Main menu
You can select different styles for the main menu.
1.
2.
3.
Press Menu
Settings
Display.
Select Main menu
Large/List.
Press OK to confirm.
Wallpaper
You can select different display backgrounds.
1.
2.
3.
Settings
Display
Wallpaper:
Press Menu
• System to select predefined images.
• User to select user defined images, see File manager, p.43
Use / to display available wallpapers.
Press OK to confirm.
Text size
You can customise the text size for messages and the phonebook.
1.
2.
3.
Press Menu
Settings
Display.
Select Text size
Normal/Large.
Press OK to confirm.
Idle display
In standby mode the display can show clock only, clock and the service
provider, or all information.
1.
2.
3.
Press Menu
Settings
Display.
Clock only/Clock & Operator/All info.
Select Idle display
Press OK to confirm.
Themes
You can select different themes to personalise the phones texts and
background.
1.
2.
3.
Press Menu
Settings
Display
Use / to select a theme.
Press OK to confirm.
26
Themes.
English
LCD backlight
Select the delay time for the display backlight.
1.
2.
3.
Press Menu
Settings
Select LCD backlight:
• 15 sec.
• 30 sec.
• 1 min
Press OK to confirm.
Display.
Brightness
You can customise the phones brightness settings.
1.
2.
3.
Press Menu
Settings
Select Level 1–Level 3.
Press OK to confirm.
Doro Experience
Display
Brightness.
®
Create an Doro Experience account to get the most out of your phone.
Access the phone using any web browser, www.doroexperience.com.
Easily view and share your photos or videos.
®
Note! You need to have Internet access to use most of the features in
Doro Experience . Depending on how you use your phone, it can use up a
lot of Internet bandwidth really quickly. Before you use your phone, we
strongly recommend that you contact your mobile operator about data
rates. Using data services while roaming can be costly. Check with your
mobile operator for data roaming rates before you use data roaming.
®
Create account
1.
2.
3.
4.
Press Menu
Settings
Doro Experience
Create account.
Your username is automatically set to your phone number/owner
number.
The owner number is supplied by your service provider and is usually
set on the SIM card. If not, you can enter the number yourself.
Enter password and press .
Re-enter the password in the field below and press OK.
27
English
Note! The username may contain letters (a-z) and numbers (0-9), but (+)
is not allowed.
Keep the owner number in a safe place, since it will be needed if you
need to reset.
Log in/Log out
1.
2.
3.
Press Menu
Settings
Doro Experience
Enter your phone number as user name.
Enter your password and press Log in.
Log in.
Options
You can select to synchronise your phone with Doro Experience Manager.
1.
2.
3.
®
Press Menu
Settings
Doro Experience.
Select Options:
• Minimal synchronization to synchronise your contacts, calendar
and phone settings.
• Full synchronization to synchronise the same content as above
and photos.
• More info to view more information.
Press OK to confirm.
Sync. intervals
You can select different synchronisation intervals.
1.
2.
3.
Press Menu
Settings
Doro Experience.
Select Sync. intervals:
• Manual to synchronise manually. No automatic synchronising.
• Every 15 minutes to synchronise automatically every 15
minutes.
• Hourly to synchronise automatically every hour.
• Daily to synchronise automatically every day.
Press OK to confirm.
Tip: You can also synchronise manually by pressing Synchronize now.
Account
1.
2.
Press Menu
Settings
Doro Experience.
Select Account to view your account information details.
28
English
3.
Press Back to return.
Weather
Note! You need to have Internet access to use this feature. We
recommend that you contact your service provider about data rates.
You can select to view the weather in standby mode. Enter the name of a
city you want to view the weather for. See Weather, p.49.
1.
2.
3.
4.
5.
Press Menu
Settings
Weather.
Select City and enter the name of the city.
Use / to select the city in the list.
Select Wallpaper and select On.
Press OK to confirm.
Calls
Voice mail
If your subscription includes an answering service, callers can leave a
voice mail message when you cannot answer a call. Voice mail is a network service and you may need to subscribe to it first. For more information and for the voice mail number, contact your service provider.
1.
2.
3.
Press Menu
Settings
Calls
Voice mail.
Select Empty
Add.
Select Phonebook to add a contact from the Phonebook.
Alternatively, select Manual. See Phonebook, p.11.
4. Press OK to confirm.
To edit or delete an existing entry, select it and press Options
Delete.
Call voice mail
1. Press Menu
Settings
Calls
2. Press Options
Call voice mail.
3. Press OK to confirm.
Edit/
Voice mail.
Tip: Press and hold shortcut button 1 to call your voice mail.
If activated reminder in the Messages settings, a reminder signal will be
heard after 10 minutes if not listening to new voice mail messages.
29
English
Speed dial
A, B, 0 and 2–9 can be used for speed dialling. To speed dial an
entry from standby, press and hold corresponding button.
1.
Press Menu
Settings
Calls
Speed dial.
2. Select A
Add and select an entry from the phonebook.
3. Press OK to confirm.
4. Repeat to add speed dial entries for buttons B, 0, 2–9.
To change contact, select an existing entry and press Options
Edit/
Delete.
You can edit the contact information for the dedicated speed dial buttons
A and B.
1.
2.
Press corresponding button. Use / to highlight the name or the
number, then press Edit.
Press OK to confirm. Delete with Clear.
Top 10
Set an entry as one of the first
10 contacts listed in the phonebook.
1.
2.
3.
Press Menu
Settings
Calls
Top 10.
Select one of the empty entries and press Add.
Use / to scroll through the phonebook, or quick search by
pressing the key corresponding to the first letter of the entry.
4. Press OK to save the selected entry, or press Back to discard
changes.
To delete a top 10 entry, select the entry in the top 10 list and press Options
Delete.
Tip: You can also add an
entry from the phonebook. Select the
contact and press Options
Top 10.
Call time
During a call, the duration of the call is shown. You can check the duration of your calls.
1.
2.
Press Menu
Settings
Select Call time:
Calls.
30
English
3.
• Last call to show the elapsed time of the most recent call.
• Outgoing calls to show the elapsed time of all dialled calls.
• Received calls to show the elapsed time of all received calls.
• Reset all
Yes to reset all.
Press OK to confirm.
Answer mode
1.
2.
3.
Press Menu
Settings
Calls.
Select Answer mode:
• Open to answer
On to answer incoming calls by opening the
flip.
On to be able to answer incoming calls by pressing
• Any key
any button (exemption
).
Press OK to confirm.
Signal LED
1.
2.
3.
Press Menu
Settings
Calls
Signal LED.
Select On to enable notification light when incoming call and new
message.
Press OK to confirm.
Call setup
This menu may vary depending on network support and subscription.
Contact your service provider for more information.
Caller ID
Display or hide your phone number on the recipient's phone when you
call.
1.
2.
Press Menu
Settings
Calls
Call setup.
Select Caller ID:
• Set by network to use default setting by the network.
• Hide ID to never show your number.
• Send ID to always show your number
3. Press OK to confirm.
Call waiting
31
English
You can handle more than one call at a time. An alert tone will be heard
if there is an incoming call while talking. To put the current call on hold
and answer the incoming call, press Options
Answer.
1.
2.
Press Menu
Settings
Calls
Call setup.
Select Call waiting:
• Activate to enable call waiting.
• Deactivate to disable call waiting.
• Query status to display if call waiting is active or not.
3. Press OK to confirm.
Call divert
You can divert calls to an answering service or to another phone number.
Set up which calls should be diverted. Select a condition and press OK,
then select Activate, Deactivate or Query status (see Call waiting, p.31)
for each.
1.
2.
Settings
Calls
Call setup.
Press Menu
Select Call divert:
• Voice calls to divert all voice calls.
• Unreachable to divert incoming calls if the phone is turned off
or out of range.
• No reply to divert incoming calls if unanswered.
• If busy to divert incoming calls if the line is busy.
• Cancel diverts no call divert.
3. Press OK to confirm.
Call barring
Your phone can be restricted to disallow certain types of calls.
Note! A password is needed to apply Call barring. Contact your service
provider to get the password.
1.
2.
3.
Press Menu
Settings
Calls.
Select Call setup
Call barring.
Select Outgoing calls:
• All calls to answer incoming calls but not dial out.
• Internat.calls unable to call international numbers.
32
English
•
4.
5.
6.
7.
Int. except home unable to call international numbers except to
the country associated with the SIM card.
Press OK to confirm.
Select Incoming calls:
• All calls to dial out but not receive incoming calls.
• When roaming unable to receive incoming calls while roaming
(operating in other networks).
Press OK to confirm.
Select Cancel all to cancel all call barring (password needed). Press
OK to confirm.
Messages
Predictive text
1.
Press Menu
2.
Select On to enable Predictive text/eZiType , see Entering text
p.5.
Press OK to confirm.
3.
Settings
Messages
Predictive text.
™
Writing language
1.
2.
3.
Press Menu
Settings
Messages
Use / to select a language.
Press OK to confirm.
Writing language.
Write speed
You can change the speed at which keypad characters repeat (before the
cursor moves onto the next character).
1.
2.
3.
Press Menu
Settings
Messages
Select Slow, Normal or Fast.
Press OK to confirm.
Write speed.
SMS settings
Memory status
1.
2.
Press Menu
Settings
Messages
SMS settings.
Select Memory status to display the memory space used on the SIM
card and in the phone memory. Phone memory can store up to 200
messages.
33
English
3. Press Back to return.
Storage
1.
2.
Press Menu
Settings
Messages
SMS settings.
Select Storage:
• SIM (default) to store messages on the SIM card.
• Phone to store messages in the phone memory.
3. Press OK to confirm.
SMS centre
The SMS centre number is needed to use the message function. The
number to your service centre is supplied by your service provider and is
usually set on the SIM card. If the service centre number is saved on the
SIM card it is shown. If not, you can enter the number yourself. Contact
your service provider for more information.
1. Press Menu
Settings
Messages
SMS settings.
2. Select SMS centre
Edit.
3. Enter the service centre number. Press Clear to delete.
4. Press OK to confirm.
Cell broadcast
You can receive messages on various topics from your service provider,
such as weather or traffic conditions in a particular region. For available
channels and relevant channel settings, contact your service provider.
Cell broadcast messages cannot be received when the device is roaming.
1.
2.
3.
Press Menu
Settings
Messages
SMS settings.
Select Cell broadcast:
• Function on/off to turn information On/Off.
• Read messages to read the message.
• Languages to select language On/Off.
• Channel settings to select from which channels to receive/subscribe messages. Use the options Subscribe, Cancel subscription, Add, Edit and Delete to define your channels.
Press OK to confirm.
MMS settings
Memory status
34
English
1.
2.
Press Menu
Settings
Messages
MMS settings.
Select Memory status to display the memory space used in the
phone memory.
3. Press Back to return.
Storage
Picture messages are saved by default in the phone memory. When the
memory becomes full you will need to either delete a picture message
(see Inbox, Outbox and Sent, p.16) or select to save your picture messages on the memory card. When the memory is full you will see a message when you try to send or receive a picture message.
Note! Make sure to insert a compatible memory card before saving on it
(see Install the SIM card, memory card and the battery, p.1).
1.
2.
3.
Press Menu
Settings
Messages
MMS settings.
Select Storage:
• Phone to store in the phone memory.
• Memory card (memory card only appears if you have inserted a
card) to store picture messages on the memory card.
Press OK to confirm.
Reminder
The text message reminder alerts you once if you haven't checked your
text message or listened to your voice mail within 10 minutes from re, no receipt. If the notification envelope is removed by pressing
minder will be heard.
1.
2.
3.
Press Menu
Settings
Messages
Select On/Off to enable/disable.
Press OK to confirm.
Vibration
Reminder.
The text message vibration alert is several short vibrations that continues
for Short (4 seconds) or Long (12 seconds).
1.
2.
Press Menu
Settings
Select Vibration:
• Short (4 seconds)
• Long (12 seconds)
Messages.
35
English
3.
Press OK to confirm.
Note! If Alert type is set to Ring only the phone will not vibrate.
Delivery report
You can select if you want the phone to notify you when your text message or picture message has reached the receiver.
1.
2.
3.
Press Menu
Settings
Messages.
Select Delivery report
On/Off to enable/disable.
Press OK to confirm.
Note! If you choose Delivery report=On, some operators will charge you
for that message.
Delete
1.
2.
Press Menu
Settings
Messages.
Select Inbox/Outbox/Sent/Delete all
Yes to delete all messages.
Camera
1.
2.
Press Menu
Settings
Camera:
• EV information: EV/Light sensitivity can be adjusted by pushing
volume keys up & down when in camera mode.
• Browse style to change view. Select Large, List or Medium.
• Sort by to sort pictures and videos by Name or Time.
• Storage to save pictures and videos on Phone or Memory card.
• Delete all to delete all saved pictures and videos.
• Flash to set as Auto, Off, On or Red-eye reduction.
• Image size to set as Small (lowest quality), 1 MP or 2 MP (highest quality).
• Video camera
Quality to set as High or Low.
• Video camera
Record time to set as No limit or 1 min.
Off/Low/High.
• Shutter sound
Press OK to confirm.
Note! With higher quality, less pictures or videos can be stored in the
internal memory.
36
English
Assistance
Change settings for the assistance button function.
Activation
Select how to activate the assistance function using the assistance
button.
1.
2.
3.
Press Menu
Settings
Assistance.
Select Activation:
• On Normal to activate by pressing and holding the button for
approximately 3 seconds, or press it twice within 1 second.
• On (3) to activate by pressing the button 3 times within 1
second.
• Off to disable the assistance button.
Press OK to confirm.
Number list
Select numbers to the list that will be called when the assistance button
is pressed.
1.
2.
3.
Press Menu
Settings
Assistance
Number list.
Select Empty
Add.
Select Phonebook to add a contact from the phonebook.
Alternatively, press Manual to add names/numbers manually. See
Phonebook, p.11 .
4. Press OK to confirm.
5. Repeat until you have 5 contacts (maximum).
To edit or delete an existing entry, select it and press Options
Edit/
Delete.
SMS
A text message can be sent to the contacts in the numbers list when the
assistance button is pressed.
Activation
1. Press Menu
Settings
Assistance
SMS.
2. Select Activation:
• On the phone sends a text message before dialling.
37
English
• Off the phone dials without sending a text message first.
3. Press OK to confirm.
Message
1.
2.
3.
Press Menu
Settings
Assistance
SMS.
Select Message
Edit to write the message.
Press OK to confirm.
Note! You must write a message if you activate the SMS function.
Confirm with "0"
When the assistance function is activated the phone dials the first number on the list. If the call is not answered within 25 seconds, the next
number is dialled. Dialling is repeated 3 times or until the call is answered, or until
is pressed by the user.
You can enable the Confirm with "0" function. If the receiver doesn’t
press 0 within 60 seconds the call will be disconnected and the next
number in the sequence will be called. If the receiver presses 0 within
60 seconds, the call is confirmed and no further call attempts will be
made (assistance sequence interrupted). To enable set the function as
On.
Signal type
Select the notification signal type for the assistance sequence.
1.
2.
3.
Press Menu
Settings
Assistance.
Select Signal type:
• High to use loud signals (default).
• Low to use one low signal.
• Silent no sound indication, like a normal call.
Press OK to confirm.
Alarm info
Please read the important safety information before enabling the assistance function:
1.
Press Menu
Settings
Assistance
38
Alarm info:
English
•
2.
Be careful about including numbers with automatic answering
in the call list, as the alarm sequence stops once the call is
answered.
Press Back to return.
Note! This information is not applicable if Confirm with "0" is set to On.
Connectivity
Bluetooth
®
IMPORTANT!
When you are not using Bluetooth connectivity, select Function on/off
Off or select Visibility
Off. Do not pair with an unknown device.
Function on/off
1. Press Menu
Settings
2. Select Function on/off
3. Press OK to confirm.
Visibility
1.
2.
3.
Connectivity
Bluetooth.
On/Off to enable/disable Bluetooth.
Press Menu
Settings
Connectivity
Bluetooth.
Select Visibility
On/Off to make your phone visible/invisible to
other devices.
Press OK to confirm.
Note! To prevent other devices from finding your device, select Off. Even
if you select Off, paired devices can still detect your device.
Device name
1. Press Menu
Settings
Connectivity
Bluetooth
Device
name.
2. Enter the name your phone should appear with for other Bluetooth
devices.
3. Press Done to confirm.
Search device
Search for available Bluetooth audio devices. If Bluetooth is not enabled
you can enable it by pressing Yes.
1.
Press Menu
device.
Settings
Connectivity
39
Bluetooth
Search
English
2.
3.
Select from the list of devices and press Bond to connect.
When connecting to another Bluetooth device you need a shared
password. Enter the password and press OK.
My device
Add new devices or view saved.
1.
Press Menu
Settings
Connectivity
Bluetooth
My
device.
2. Select device from the list and press Options:
• Connect/Disconnect to connect/disconnect with the selected
device. This may require a profile, usually a headset.
• Set default to set the connected device as default.
• Rename to change the name of the device.
• Delete to delete the device from the list.
• Delete all to delete all devices from the list.
3. Press OK to confirm.
Audio path
1. Press Menu
Settings
Connectivity
Bluetooth.
2. Select Audio path:
• Phone to answer incoming calls with the phone
• Forward BT to forward incoming calls to the Bluetooth device.
3. Press OK to confirm.
Data roaming
Your phone automatically selects your (service providers) home network
if within range. If not within range, you can use another network, provided
your network operator has an agreement that allows you to do so. This is
called roaming. Contact your service provider for more information.
Note! Using data services while roaming can be costly. Contact your
service provider for data roaming rates before you use data roaming.
1.
2.
3.
Press Menu
Settings
Connectivity
Select On/Off to enable/disable.
Press OK to confirm.
40
Data roaming.
English
Security
SIM lock
The SIM card is protected with a PIN code (Personal Identification Number). The phone can be set to ask for the PIN code on startup.
1.
2.
3.
Press Menu
Settings
Security.
Select SIM lock:
• On to activate PIN code, you need to enter the PIN code every
time the phone is started.
• Off to deactivate PIN code. Warning, if SIM card is lost/stolen it
is unprotected.
• Automatic to not enter the PIN code when the phone is started,
the phone remembers it automatically. If the SIM card is moved
to another phone (lost/stolen), the PIN code needs to be entered to unlock.
Press OK to confirm.
Note! You need to enter the current PIN code to disable/enable SIM lock.
Phone lock
1.
2.
3.
Press Menu
Settings
Security
Select On/Off to enable/disable.
Press OK to confirm.
Phone lock.
Note! You need to input the current phone code to disable/enable Phone
lock. The default phone code is 1234.
Remote configuration
Allow persons that you trust, usually a family member or friend, to send
information to your Doro PhoneEasy 622. You can receive phonebook
contacts and contacts for speed dial keys, calendar tasks and settings
for the assistance button. When activated, you don’t have to do anything,
it’s the other person that sends information to you.
®
Activation
1. Press Menu
Settings
Security.
2. Select Remote config
Activation.
3. Select On/Off to enable/disable.
41
English
4. Press OK to confirm.
Number list
You need to add the name and number of the people who are allowed to
send information from their phone to your Doro PhoneEasy 622.
®
1.
2.
3.
Settings
Security
Remote config.
Press Menu
Select Number list
Empty
Add.
Select Phonebook to add a contact from it.
Alternatively, press Manual.
4. Press .
5. Enter the number and press OK to confirm.
6. Repeat until you have 5 contacts (maximum).
To edit or delete an existing entry, select it and press Options
Edit/Delete.
View/
Fixed dial (FDN)
You can limit calls to certain numbers saved on the SIM card. The list of
allowed numbers is protected by your PIN2-code.
1.
2.
3.
Press Menu
Settings
Security.
Select Fixed dial:
• Mode
On/Off to enable/disable.
• Fixed numbers
Add and enter the first allowed number.
Alternatively, select an entry and press Options
Add/Edit/
Delete.
If needed, enter PIN2 and press OK to confirm.
Note! You can save parts of phone numbers. For example, if you save
01234, allows calls to all numbers starting with 01234. It is possible to
place an SOS call by entering the main local emergency number followed
by
even when fixed dial is activated. When fixed dial is activated you
are not allowed to view or manage any phone numbers saved on the SIM
card. You are not able to send any text messages either.
Passwords (change your passwords)
To change the PIN, PIN2 or the Phone code passwords:
1.
Press Menu
Settings
Security
42
Passwords.
English
2.
3.
4.
Enter the current code and confirm with OK.
Enter a new code and confirm with OK.
Enter the new code again and confirm with OK.
Reset settings
1.
2.
3.
Press Menu
Settings
Security.
Select Reset settings to reset the phone settings. All the changes
that you have made to the phone settings will be reset to default
settings.
Enter the phone password and press OK to reset.
Reset all
1.
2.
3.
Press Menu
Settings
Security.
Select Reset all to delete phone settings and content such as contacts, number lists and messages (SIM memory is not affected).
Enter the phone password and press OK to reset.
Note! The default phone code is 1234.
File manager
Manage the contents and properties of files. You can open, delete, move,
copy and rename files.
1.
2.
3.
4.
Settings
File manager.
Press Menu
Select Phone/Memory card
Open.
Select a folder, eg Photos and press Open.
Select a file and press Options:
• Play (audio/video/music), press
to Play or
to Stop.
• View (photos/images) for single view.
• Send
Send by MMS to send as picture message (Create
and send picture message (MMS), p.15)/Send by Bluetooth to
send to a Bluetooth device (Bluetooth , p.39).
• Details to view detailed information about the file, e.g. date,
size, copyright protection.
• Use
Wallpaper to save as display background/Phonebook
picture to be used with a phonebook contact.
• Rename to rename the file.
• Delete to delete the file.
®
43
English
•
•
•
Delete all to delete all files in selected folder.
Sort by
Name/Time.
Copy/Move
Phone/Memory card
Options
Open. Select a folder, eg Photos and press Options
Paste.
5. Press OK to confirm.
Supported formats:
•
•
•
Picture format: BMP/GIF/JPG/PNG. Photos taken with the built in
camera are saved as JPG.
Audio format: WAV/AMR/MIDI/MP3/AAC/AAC+. Recordings made
with the built in sound recorder are saved as AMR.
Video format: MP4/3GPP.
Additional functions
Organizer
The
Organizer menu contains:
Alarm
Daily reminder
Calendar
Notes
Alarm
1.
2.
3.
4.
Press Menu
Organizer
Alarm
On.
Enter the alarm time using the keypad.
Press OK to confirm.
For a single occurrence, select Single.
For a repeated alarm, select Repeated. Scroll through the list of days
and press On/Off to enable/disable the alarm for each day.
To edit an alarm, press Edit.
To stop the alarm, press Off.
Note! The alarm will work even when the phone is switched off. Do not
press Yes to power on if wireless phone use is prohibited or when it may
cause interference or danger.
When the alarm goes off a signal will sound. Press Stop to turn off the
alarm or press Snooze to repeat the alarm after 9 minutes.
44
English
Calendar
View
1. Press Menu
Organizer
Calendar.
2. Press Options
View to show tasks for the selected date.
3. Press OK to confirm.
Add task
1. Press Menu
Organizer
Calendar
Add task.
2. Enter date for the task, then press .
3. Enter time for the task, then press .
4. Enter subject.
5. Press OK to confirm.
Jump to date
1. Press Menu
Organizer
Calendar
Jump to date.
2. Enter the date.
3. Press OK to confirm.
View all
1. Press Menu
Organizer
Calendar.
2. Select a task and press Options
View all.
3. Press Options:
• Edit to edit selected task.
• Delete to delete selected task.
• Delete all to delete all tasks.
4. Press OK to confirm.
Note! The calendar will work even when the phone is switched off. Do not
press Yes to power on if wireless phone use is prohibited or when it may
cause interference or danger.
Daily reminder
1.
2.
3.
4.
Press Menu
Organizer
Daily reminder
Enter time for the task, then press .
Enter subject.
Press OK to save.
45
Add.
English
Note! The reminder will work even when the phone is switched off. Do
not press Yes to power on if wireless phone use is prohibited or when it
may cause interference or danger.
When the alarm goes off a signal will sound. Press Stop to turn off the
alarm or press Snooze to repeat the alarm after 9 minutes.
Options
1. Press Menu
Organizer
Daily reminder.
2. Select a reminder, then press Options
• Skip reminder to skip reminder.
• Activate reminder to activate reminder.
• Add to add new reminder.
• Edit to edit selected reminder.
• Delete to delete selected reminder.
• Delete all to delete all reminders.
3. Press OK to confirm.
Note! The reminder will work even when the phone is switched off. Do
not press Yes to power on if wireless phone use is prohibited or when it
may cause interference or danger.
Notes
1. Press Menu
Organizer
Notes.
2. Select Add to enter your note using the keypad.
3. Press OK to save.
Options
1. Press Menu
Organizer
Notes.
2. Select a note, then press Options:
• Add to add new note.
• Edit to edit selected note.
• Delete to delete selected note.
• Delete all to delete all notes.
3. Press OK to confirm.
More
The
More menu contains:
46
English
FM radio
Games
Calculator
Torch
FM radio
The FM radio has a frequency range from 87.5 to 108.0 MHz and 9 preset channels.
Turning the radio on
1.
2.
3.
Connect the headset to the headset socket
Press Menu
More
FM radio. The radio is turned on. The
tuned frequency is displayed.
Select channel using
or . Use the side keys +/- to adjust the
volume.
Tip: Press
to return to standby mode. The radio will continue to play.
Volume
1. Press Menu
More
FM radio.
Volume.
2. Press Options
3. Use
or
or the side buttons +/– to adjust the volume.
4. Press OK to confirm.
Save frequency
1.
Press Menu
More
FM radio
Options
Save frequency.
2. Enter a name for the new channel, see Entering text , p.5.
3. Press Save.
Switch off
• Press Menu
More
FM radio
Options
Switch off.
Tip: Disconnecting the headset will also turn off the radio.
Loudspeaker
1. Press Menu
More
FM radio.
2. Press Options
Loudspeaker
On.
3. Use the side buttons +/– to adjust the sound volume.
4. To turn off, select Off.
Channel list (editing the channel list)
47
English
1.
2.
Press Menu
More
FM radio
Options
Channel list.
Select the channel you wish to edit and press Options:
• Play to play the selected channel.
• Delete to delete the channel. Press Yes to confirm or No to return to the channel list.
• Edit to edit the channel name, then press
to edit the frequency, use # to enter the decimal point. Press Save when
done.
3. Press OK to confirm.
Manual input (changing search mode)
1.
2.
Press Menu
More
FM radio
Options.
Select Manual input:
• Fine tune to tune manually with
or .
• Auto search to use automatic station search with
3. Press OK to confirm.
Auto save
or
Note! This will overwrite all previously saved channels!
1.
2.
3.
Press Menu
More
FM radio
Options.
Select Auto save to automatically install available radio stations in
channels 1-9.
Press OK to confirm.
Calculator
The calculator can perform basic mathematical operations.
•
Press Menu
More
Calculator.
Torch
1.
2.
Press Menu
More
Press Off to turn off.
Torch.
Note! See Torch, p.23 to set the automatic switch off time.
Games
•
Press Menu
More
Games.
48
English
Status
Scroll through the
status list to get further information about the
icons shown on top of your display. Icons shown on the display varies depending on your phone status.
1.
2.
3.
Press Menu
Status.
Use
or
to scroll the list.
Press Back to return to standby mode.
Weather
Note! You need to have Internet access to use this feature. We
recommend that you contact your service provider about data rates.
View the
1.
2.
weather for your chosen city.
Press Menu
Weather.
Press Back to return to standby mode.
Note! In order to see the weather, you must first select a city. See
Weather, p.29
Instructions for the REMOTE USER
Send remote control commands by text message
1.
2.
Make sure activation is set to On and that the remote user is saved
in the Number list on the Doro PhoneEasy 622.
Press Menu
Settings
Security
Remote config.
®
Note! Text message format must be *#Command#, otherwise the text
message cannot be identified as a remote control command.
•
•
•
Parameters are the content you want to send.
Use # sign to separate two parameters.
In tables P = Parameters.
Save a new contact in the phonebook
All contacts sent to Doro PhoneEasy 622 by remote configuration are
stored in the phone (even if storage is set to SIM). 3 phone numbers for
®
each contact
Mobile,
Home or
49
Office can be sent.
English
Command
phonebook
P1
name
max. length=
20
P2
mobile
max. length=
40
P3
home
P4
office
Example: Send Jeff Jackson’s mobile number, home number and his office number to Doro PhoneEasy 622.
The mobile number is: 0700-393939. Home number: 046-280 50 11.
Office number: 046-280 50 83.
®
•
*#phonebook#Jeff
Jackson#0700393939#0462805011#0462805083#
The number is saved in the Doro PhoneEasy 622 phonebook as:
®
Jeff Jackson
0700393939
0462805011
0462805083
Note! Only use numerals for parameters 2, 3 and 4. If you use letters in
these parameters it will be stored as empty/blank in the phonebook.
Contacts already saved in the phonebook, will not be replaced. They will
be duplicated. This is to avoid unintentional removal of contacts from the
phonebook.
Tip: When storing international numbers, always use + before the country
code for best operation. Enter the phone number including the area code.
Set the assistance function
Command
alert
P1
activation
P2
0/1/2
0=Off
1=On
Normal
2=On (3)
P3
P4
alert
number
1–5
location in
Number list
Name
max. length=
20
number
max. length=
40
50
English
alert
message
alert
confirm with
“0”
signal type
alert
0/1
0=Off
1=On
0/1
0=Off
1=On
0/1/2
0=High
1=Low
2=Silent
Text
max. length=
70
Example: Activate the assistance function.
• *#alert#a#1#
Example: Store Jeff Jackson in Number list as position one (1) with
phone number: 0700-393939.
• *#alert#n#1#Jeff Jackson#0700393939#
Example: Enable the text message function to when the Assistance button is pressed. The text message should be: This is an assistance message. Please take appropriate actions.
•
*#alert#m#1#This is an assistance message. Please take appropriate actions.#
Example: Enable the Confirm with "0" function.
• *#alert#c#1#
Example: Set the Signal type to low.
•
*#alert#s#1#
Tip: Remember to write down the positions you send. This way it is easier
for you to send changes later.
Set the one touch memories
Command
memorykey
P1
A key
P2
Name
max length = 20
P3
number
max length = 40
memorykey
B key
Name
max length = 20
number
max length = 40
51
English
Example: Set Jeff Jackson’s mobile number in memory key A in Doro
PhoneEasy 622 and Martha Thomson in memory key B.
®
•
•
*#memorykey#a#Jeff Jackson#0700393939#
*#memorykey#b#Martha Thomson#0768991014#
Add task to calendar
Command
task
P1
yyyymmdd
Date
P2
hhmm
Time
P3
note
description of task.
max. length = 35
Example: Send a new calendar task to Doro PhoneEasy 622. The task
text should be: dentist appointment in December 1, 2010 at 10:30.
®
•
*#task#20101201#1030#dentist appointment#
Troubleshooting
Phone cannot be switched on
Battery charge low
Battery incorrectly
installed
Connect the power adapter and charge the battery for 3 hours. Full battery capacity is reached
after the battery has been charged 3–4 times.
Check the installation of the battery.
Failure to charge the battery
Battery or charger
Check the battery and charger.
damaged
Battery should only be
Improve the charging environment.
charged in temperatures
between 0 °C and 40 °C
Charger incorrectly con- Check the charger connections.
nected to phone or
power socket
Standby time decreases
Battery charge capacity
too low
Too far from base station, phone is constantly
searching for signal
Install a new battery.
Searching the network consumes battery power.
Find a place with a stronger signal, or temporarily turn off the phone.
52
English
Failure to place or receive calls
Call barring activated
Deactivate call barring. If this does not solve the
problem, contact your service provider.
PIN code not accepted
Wrong PIN code entered Enter the PUK code to change the PIN code, or
too many times
contact your service provider.
SIM card error
SIM card damaged
SIM card incorrectly
installed
SIM card dirty or damp
Check the condition of the SIM card. If it is damaged, contact your service provider.
Check the installation of the SIM card. Remove
the card and reinstall it.
Wipe the contact surfaces of the SIM card with a
clean cloth.
Failure to connect to network
SIM card invalid
No coverage of GSM
service
Contact your service provider.
Contact your service provider.
Weak signal
Too far from base
station
Network congestion
Echo or noise
Regional problem from
bad network relay
Try again from another location.
Try calling at a later time.
Hang up and redial. This may switch to another
network relay.
Failure to add a contact
Phonebook memory full Delete contacts to free up memory.
Failure to set a function
Function not supported
or subscribed from
network
Contact your service provider.
53
English
Unable to send or receive Picture Messages / MMS with the SIM card
The MMS profile is not
set automatically and it
is not possible to send
or receive MMS
For some operators the MMS profile has to be
selected manually. Activate the correct profile to
suit your SIM card or network used.
Failure to send or download MMS
Phone memory is full
and it is not possible to
send or download MMS
Incorrect MMS profile
selected.
Delete received MMS or select to set the default
storage for MMS to be saved on a memory card
(not included).
For some service providers the MMS profile has
to be selected manually.
Safety instructions
CAUTION
The unit and the accessories can contain small parts. Keep all of the equipment out
of the reach of small children.
The mains adapter is the disconnect device between the product and mains power.
The mains socket outlet must be close to the equipment and easily accessible.
Network services and costs
Your device is approved for use on the WCDMA 900/2100 MHz, GSM 900/1800/1900
MHz networks. To use the device, you need a subscription with a service provider.
Using network services may result in traffic costs. Some product features require support from the network, and you may need to subscribe to them.
Operating environment
Follow the rules and laws that apply wherever you are, and always turn off the unit
whenever its use is prohibited or can cause interference or hazards. Only use the unit in
its normal user position.
This unit complies with guidelines for radiation when it is used either in a normal position against your ear, or when it is at least 1.5 cm from your body. If the unit is carried
close to your body in a case, belt holder or other holder, these holders should not contain any metal, and the product should be placed at the distance from your body specified above. Make sure that the distance instructions above are followed until the
transfer is complete.
Parts of the unit are magnetic. The unit can attract metal objects. Do not keep credit
cards or other magnetic media near the unit. There is a risk that information stored on
them can be erased.
54
English
Medical units
The use of equipment that transmits radio signals, for example, mobile phones, can interfere with insufficiently protected medical equipment. Consult a doctor or the manufacturer of the equipment to determine if it has adequate protection against external
radio signals, or if you have any questions. If notices have been put up at health care facilities instructing you to turn off the unit while you are there, you should comply. Hospitals and other health care facilities sometimes use equipment that can be sensitive to
external radio signals.
Implanted medical devices
To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 15.3 cm between a wireless device and the medical device. Persons who have such devices should:
• Always keep the wireless device more than 15.3 cm from the medical device.
• Should not carry the phone in a breast pocket.
• Hold the wireless device to the ear opposite the medical device
If you have any reason to suspect that interference is taking place, turn the phone off
immediately If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
Areas with explosion risk
Always turn off the unit when you are in an area where there is a risk of explosion. Follow all signs and instructions. There is a risk of explosion in places that include areas
where you are normally requested to turn off your car engine. In these areas, sparks
can cause explosion or fire which can lead to personal injury or even death.
Turn off the unit at filling stations, and any other place that has fuel pumps and auto repair facilities.
Follow the restrictions that apply to the use of radio equipment near places where fuel
is stored and sold, chemical factories and places where blasting is in progress.
Areas with risk for explosion are often – but not always – clearly marked. This also applies to below decks on ships; the transport or storage of chemicals; vehicles that use
liquid fuel (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powder.
Li-ion battery
This product contains a Li-ion battery. There is a risk of fire and burns if the battery pack
is handled improperly.
55
English
WARNING
Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns,
do not disassemble, crush, puncture, short external contacts, expose to temperature
above 60° C (140° F), or dispose of in fire or water. Recycle or dispose of used
batteries according to the local regulations or reference guide supplied with your
product.
Protect your hearing
This device has been tested to comply with the Sound Pressure Level requirement laid
down in the applicable EN 50332-1 and/or EN 50332-2 standards.
WARNING
Excessive exposure to loud sounds can cause hearing damage. Exposure
to loud sounds while driving may distract your attention and cause an
accident. Listen to a headset at a moderate level, and do not hold the
device near your ear when the loudspeaker is in use.
Emergency calls
IMPORTANT!
Mobile phones use radio signals, the mobile phone network, the terrestrial network
and user-programmed functions. This means that connection cannot be guaranteed
in all circumstances. Therefore, never rely only on a mobile phone for very important
calls such as medical emergencies.
Vehicles
Radio signals can affect electronic systems in motor vehicles (for example, electronic
fuel injection, ABS brakes, automatic cruise control, air bag systems) that have been incorrectly installed or are inadequately protected. Contact the manufacturer or its representative for more information about your vehicle or any additional equipment.
Do not keep or transport flammable liquids, gases or explosives together with the unit
or its accessories. For vehicles equipped with air bags: Remember that air bags fill with
air with considerable force.
Do not place objects, including fixed or portable radio equipment in the area above the
airbag or the area where it might expand. Serious injuries may be caused if the mobile
phone equipment is incorrectly installed and the airbag fills with air.
It is prohibited to use the unit in flight. Turn off the unit before you board a plane. Using
wireless telecom units inside a plane can pose risks to air safety and interfere with telecommunications. It may also be illegal.
56
English
Care and maintenance
Your unit is a technically advanced product and should be treated with the greatest care.
Negligence may void the warranty.
•
Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can
contain substances that corrode the electronic circuits. If the unit gets wet, you
should remove the battery and allow the unit to dry completely before you replace
it.
• Do not use or keep the unit in dusty, dirty environments. The unit’s moving parts
and electronic components can be damaged.
• Do not keep the unit in warm places. High temperatures can reduce the lifespan
for electronic equipment, damage batteries and distort or melt certain plastics.
• Do not keep the unit in cold places. When the unit warms up to normal temperature, condensation can form on the inside which can damage the electronic circuits.
• Do not try to open the unit in any other way than that which is indicated here.
• Do not drop the unit. Do not knock or shake it either. If it is treated roughly the circuits and precision mechanics can be broken.
• Do not use strong chemicals to clean the unit.
The advice applies to the unit, battery, mains adapter and other accessories. If the
phone is not working as it should, please contact the place of purchase for service.
Don’t forget the receipt or a copy of the invoice.
Warranty
This product is guaranteed for a period of 12 months from the date of purchase. In the
unlikely event of a fault occurring during this period, please contact the place of purchase. Proof of purchase is required for any service or support needed during the guarantee period.
This guarantee will not apply to a fault caused by an accident or a similar incident or
damage, liquid ingress, negligence, abnormal usage, non-maintenance or any other circumstances on the user’s part. Furthermore, this guarantee will not apply to any fault
caused by a thunderstorm or any other voltage fluctuations. As a matter of precaution,
we recommend disconnecting the charger during a thunderstorm.
Batteries are consumables and are not included in any guarantee.
This guarantee does not apply if batteries other than DORO original batteries are used.
Specifications
Network:
Dimensions:
Weight:
Battery:
Operating ambient
temperature
WCDMA 900/2100 MHz, GSM 900/1800/1900 MHz
102 mm x 52 mm x 19 mm
104 g (including battery)
3.7 V / 800 mAh Li-ion battery
Min: 0° C (32° F)
Max: 40° C (104° F)
57
English
Charging ambient
temperature
Storage temperature
Min: 0° C (32° F)
Max: 40° C (104° F)
Min:–20° C (–4° F)
Max: 60° C (140° F)
Bluetooth is a registered trademark of Bluetooth SIG, inc.
®
eZiType is a trademark of Zi Corporation.
™
vCard is a trademark of the Internet Mail Consortium.
Hearing aid
This device should work with most hearing aid equipment in the market. However, full
compatibility with all equipment can not be promised.
Specific Absorption Rate (SAR)
This device meets applicable international safety requirements for exposure to radio
waves. The highest SAR value under the ICNIRP guidelines for use of the device at the
ear is 0.483 W/kg measured over 10 g tissue.
The maximum limit according to ICNIRP is 2.0 W/kg measured over 10 g tissue.
Declaration of Conformity
Doro hereby declares that Doro PhoneEasy 622 conforms to the essential requirements and other relevant regulations contained in the Directives 1999/5/EC (R&TTE)
and 2011/65/EC (RoHS). A copy of the Declaration of Conformity is available at www.
doro.com/dofc.
®
FCC/IC
Disclaimer and Limitation of Liability
Doro AB and its affiliates, licensees and retailers assume no responsibility for any damage or loss resulting from the use of this guide. Doro AB and its affiliates, licensees and
retailers assume no responsibility for any loss or claims by third parties that may arise
through the use of this software. Doro AB and its affiliates, licensees and retailers assume no responsibility for any damage or loss caused by deletion of data as a result of
malfunction, dead battery, or repairs. Be sure to make backup copies of all important
data on other media to protect against data loss.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL DORO AB OR ANY OF ITS AFFILIATES, LICENSEES AND RETAILERS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF
THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW,
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY, OR CONTENTS OF THIS DOCUMENT. DORO AB RESERVES THE RIGHT TO REVISE THIS
DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
58
English
FCC/Industry Canada notice
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules/Canadian ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The FCC or Industry Canada can require you to stop using your unit if such interference
cannot be eliminated.
Doro has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user’s authority to operate the equipment.
RF exposure information (SAR)
This model phone meets the government’s requirements for exposure to radio waves.
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government and by the Canadian regulatory authorities.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the
Canadian regulatory authorities is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC and Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach
the network. In general, the closer you are to a wireless base station antenna, the lower
the power output.
The highest SAR value for the model phone as reported to the FCC when tested for use
at the ear is 0.32 W/kg and when worn on the body, as described in this user guide, is
1.16 W/kg (Body-worn measurements differ among phone models, depending upon
available enhancements and FCC requirements.)
59
English
While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an
Equipment Authorization for this model phone with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/ea/fccid after searching on FCC ID: WS5DORO622
For body worn operation, this phone has been tested and meets the FCC RF exposure
guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 5/8 inch (1.5 cm) from the body. Use of other enhancements may not
ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 5/
8 inch (1.5 cm) from your body when the phone is switched on.
*In the United States and Canada, the SAR limit for mobile phones used by the public is
1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates
a substantial margin of safety to give additional protection for the public and to account
for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band.
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in
IC RSS-102 and had been tested in accordance with the measurement methods and
procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed
and operated with minimum distance 1.5 cm between the radiator and your body. This
device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
60
English
61
PhoneEasy 622 (1041)
FCC ID: WS5DORO622
English
Version 1.3
©2014 Doro AB. All rights reserved.
www.doro.com
0700
REV 11405 — STR 20140217

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Arbortext Build                 : R60M080-1113
Config File                     : C:\Program Files\PTC\Arbortext PE\app\standard.3sppdf
Create Date                     : 2014:04:10 10:33:33+02:00
Creator                         : Arbortext Publishing Engine
EPS Processor                   : PStill version 1.78.16
Modify Date                     : 2014:04:15 09:00:05+08:00
Print Engine                    : Arbortext Advanced Print Publisher 11.0.2992/W Library-x64
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Arbortext 0020 Build            : R60M080-1113
Config 0020 File                : C:\Program Files\PTC\Arbortext PE\app\standard.3sppdf
EPS processor                   : PStill version 1.78.16
Print 0020 Engine               : Arbortext Advanced Print Publisher 11.0.2992/W Library-x64
Creator Tool                    : Arbortext Publishing Engine
Metadata Date                   : 2014:04:15 09:00:05+08:00
Producer                        : PDFlib+PDI 8.0.2p1 (C++/Win64)
Format                          : application/pdf
Document ID                     : uuid:804d9269-c836-4138-b68a-963708da8434
Instance ID                     : uuid:e798029e-d527-4a73-ad7c-b2024ab429ea
Page Layout                     : SinglePage
Page Count                      : 68
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WS5DORO622

Navigation menu