Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2470970 |
| Application ID | q8hB7ay8LZOofrfilltIIw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.64kB (632955 bits) |
| Date Submitted | 2014-12-12 00:00:00 |
| Date Available | 2014-12-12 00:00:00 |
| Creation Date | 2014-12-06 14:54:56 |
| Producing Software | Acrobat Distiller 9.3.3 (Windows) |
| Document Lastmod | 2014-12-06 14:54:56 |
| Document Title | C:\Documents and Settings\anbotek\æ¡Œé¢\Users Manual.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | anbotek |
Groupie Stick User Manual - Product illustration — 1°, , Self Iimer button Eluetoom switch Mlcro use pan I Specifications — Version Bluetooth V3.0 Frequency 2402MHZ~2480MHZ Input 5V/100mAh Capacity 60mAh Charging time About 1 hour Standby time Above 100 hour Photo Above 1000 PCS Max Load 20m Size 260*30'30 mm Weight 140 9 Max Load 500 g * Extendable Length ProdumengchGOmm Extendable Length 970mm I Instructions — Basic Operation: 1.Turn on Bluetooth switch on Monopod, and Enable your mobile phone Bluetooth. 2.Search for ” Groupie Stick” pair it to you phone. 3.Enter camera interface, and you’re ready to take picture with the Wireless monopod. 4.To save power, turn off the switch when monopod is idle. Advanced Operation: 1.Pair with another phone: Press and hold the shutter button for 5 seconds until BLUE LED start flashing. You can start pairing when the BLUE LED is flashing. 2.Re-charging : Use Micro USB cable to charge the Wireless Monopod. ltwill take approximately 1 hour for the monopod to be fully charged. RED LED will stop flashing when it is fully charged. 3.Unsuccessfu| pairing: Turn off your phone and remote shutter and try again, Senior Operation: 1.Pairing staius: rapid Blue LEDflashing(3timeslsecond)t Will automatically power-off in after 3 minutes when there is no pairing with any phone. 2,Working status: BLUE LED flash once every 3 seconds. The BLUE LED will continue flashing when you are using the shutter button. 3.Sleeping mode: Not operating the product for 10minutes, Blue LED light will stop flashing, and will enter auto-sleep mode. 4,Re-connecting :Automatically reconnect to your phone when pressing shutter button, 5,Auto-reconnect: Monopod will connect to the last paired device when you turn on the monopod.(Please ensure Bluetooth on your phone is turned on) I Compatible devices — Support phone models list Ios Andorld --------— GAL?” MI: Honorax xszaL Find7 T90 (LSOT) ”:2” MRS ”ammo xssw Finds D800 5951 (ston) "I": 9‘ng "”2 p7 XSL u7u7T 5951 (Lszsfl) Noni! pe XaT NIT 732° (ngu) NolaZ x1 Y!" (919“) 67109 MATEZ X510 8297 assuav G730 x5101 Compatible with Android 4.22 05 or newer and i036.0 or newer. FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This devrce may not cause harmful interference. and (2) This device must accept any interlerence received, including Interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offend on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technicran for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : anbotek Create Date : 2014:12:06 14:54:56+08:00 Modify Date : 2014:12:06 14:54:56+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : C:\Documents and Settings\anbotek\桌面\Users Manual.doc Creator : anbotek Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.3.3 (Windows) Document ID : uuid:3024354d-ea5f-4216-a9ed-74a6b7a8c0af Instance ID : uuid:d9298588-becb-4c75-a202-07276ef2e43f Page Count : 7EXIF Metadata provided by EXIF.tools