DowroSciences 11033689 RFID Tag Locator User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	2079857
Application ID	ke1+eez8qqIELAsVJn8HeQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.96kB (874464 bits)
Date Submitted	2013-09-23 00:00:00
Date Available	2013-09-23 00:00:00
Creation Date	2017-10-25 18:27:01
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-25 18:27:01
Document Title	USERS MANUAL
Document Creator	Adobe InDesign CS6 (Windows)

LOCATOR DEVICE INFORMATION AND USE DIRECTIONS
The Locator Device was designed to locate stations for the Sentricon® System that are utilizing Always Active™ technology LID top caps or ESP® technology
Transensors. The Locator device will only ind or locate a station — it will not identify the station or determine its status.
New features of the Locator include:
– Auto hibernate – saves battery life
– Adjustable pole length and angle with ergonomic arm rest – technician comfort
– Power switch – quick tap
– No exposed wires – fewer repairs
– Lighter weight – 2 lbs, easily its in an equipment bucket or attaches to a belt clip.
When You Get the Locator
1. Ensure the batteries are fully charged by charging the device overnight. The charger is included in the box.
2. Watch the “How-to-Use” video on the “product resources” section of the AO Resource Center (www.aoresourcecenter.com).
3. Test the device in the ofice to make sure it works properly before going to a job site.
On & Off
To turn the device on, lightly tap the power switch (see photo). There is no “off” button. The device will automatically turn off after 2 ½ minutes of inactivity.
Volume
There are 3 volume settings. To control the volume, use a soft pointed tool, like a pen cap, to push the volume switch (see photo). To mufle the volume, place
a piece of tape over the speaker which can also prevent debris from entering the speaker area.
Light Colors
– Flickering white – close to a station
– Solid white – directly above a station
– Flashing Green – device is on
– Yellow – battery is charging (light will turn off when battery is fully charged)
Pole Adjustments
The length of the pole can be adjusted by loosening the adjustment knob and shortening or lengthening the telescopic pole. The angle of the pole can be
adjusted by loosening and then tightening the knob on the end of the pole (see photo).
Battery
The device is designed to read 800 (or 35 average size homes) Always Active LID top caps and ESP Transensors before a recharge is needed. However,
it is recommended to recharge the Locator every night after use. The 3 batteries are designed to last multiple years, and can only be replaced by the
manufacturer. Taking the unit apart will void the warranty.
Moisture
The Locator is built to be water resistant, but it is not water proof. It’s recommended to utilize a protective covering, like a shower cap, when its being used in
the rain or in heavy dew.
Repairs
For any repairs or maintenance issues, please call 1-800-888-5511 option 1.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
–
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. Any changes or modiications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
LOCATOR DEVICE FEATURES
Pole Angle
Adjustment Knob
Only used by manufacturer
for software upgrades
Battery Charging Port
Speaker
Volume Settings
Power Switch — Quick Tap
Solutions for the Growing World
®™
Trademark of The Dow Chemical Company (“Dow”) or an afiliated company of Dow.
Always read and follow label directions.
U31-028-012 (08/13) DAS 010-71610

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2013:09:20 11:18:32-04:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2013:09:20 13:32:14-06:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:09:20 13:32:14-06:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:7967c4cc-1081-4a4e-8413-f546a41d5dfe
Original Document ID            : xmp.did:637479630A46E211B049EF858A5CFD57
Document ID                     : xmp.id:95755B480722E311874C9696E6BD8F1C
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:94755B480722E311874C9696E6BD8F1C
Derived From Document ID        : xmp.did:1F5A85908EFEE211B33DEBA0DCE15E17
Derived From Original Document ID: xmp.did:637479630A46E211B049EF858A5CFD57
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:09:20 11:18:32-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools