Draytek Vigor 2800 Users Manual
2800 to the manual dd6bf0c5-9768-4e3c-b5ec-c2bd59c45d53
2800_QuickStartGuide
2015-02-04
: Draytek Draytek-Vigor-2800-Users-Manual-514713 draytek-vigor-2800-users-manual-514713 draytek pdf
Open the PDF directly: View PDF 
.
Page Count: 29
| Download | |
| Open PDF In Browser | View PDF |
Vigor2800 Series Quick Start Guide Copyright Information Copyright Declarations Copyright 2005 All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. Trademarks The following trademarks are used in this document: • Microsoft is a registered trademark of Microsoft Corp. • Windows, Windows 95, 98, Me, NT, 2000, XP and Explorer are trademarks of Microsoft Corp. • Apple and Mac OS are registered trademarks of Apple Computer Inc. Other products may be trademarks or registered trademarks of their respective manufacturers. Safety Instructions and Approval Safety Instructions • Read the installation guide thoroughly before you set up Warranty We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of three (3) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or the router. • The router is a complicated electronic unit that may be repaired only be authorized and qualified personnel. Do not try to open or repair the router yourself. • Do not place the router in a damp or humid place, e.g. a bathroom. • Do not stack the routers. • The router should be used in a sheltered area, within a temperature range of +5 to +40 Celsius. • Do not expose the router to direct sunlight or other heat sources. The housing and electronic components may be damaged by direct sunlight or heat sources. • Keep the package out of reach of children. • When you want to dispose of the router, please follow local regulations on conservation of the environment. i components, without charge for either parts or labor, to whatever extent we deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. Be a Registered Owner Web registration is preferred. You can register your Vigor router via http://www.draytek.com. Alternatively, fill in the registration card and mail it to the address found on the reverse side of the card. Firmware & Tools Updates Due to the continuous evolution of DrayTek ADSL & Router technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. http://www.draytek.com ii European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2800 Series ADSL2/2+ Routers DrayTek Corp. declares that Vigor2800 series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 89/336/EEC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B. The product conforms to the requirements of Low Voltage (LVD) Directive 73/23/EEC by complying with the requirements set forth in EN60950. The Vigor2800G/Gi are designed for the WLAN 2.4GHz network throughput EC region, Switzerland, and the restrictions of France. iii Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the use is encouraged to try to correct the interference by one of the following measures: ♦ Reorient or relocate the receiving antenna. ♦ Increase the separation between the equipment and receiver. ♦ Connect the equipment into an outlet on a circuit different form that to which the receiver is connected. ♦ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device many not cause harmful interference, and (2) This device may accept any interference received, including interference that may cause undesired operation. iv Table of Contents 1. Introduction……………………………………….………………….……………. 1 1.1 1.2 1.3 1.4 Brief Overview…………………………………………………………..……… Specifications………………………………………………………..…………. Front Panel LEDs and Rear Panel Interfaces………………..……….…… Package Contains……………………………………….…………..…………. 2 3 5 9 2. Quick Install Your Vigor2800 Series Router…………………..…….. 10 2.1 Hardware Installation……………………………….……………..………….. 10 2.2 Configure Your Router via Quick Start Wizard…….……………..………. 11 3. Wireless LAN Settings (for G models)………….………….……….…… 14 3.1 General Settings…………………………………….…………………..……... 15 3.2 Security Settings…………………………………………….……………...…. 16 3.3 WDS Settings…………………………………………….……………...……… 17 4. Trouble Shooting………………………………………………………..………. 19 Is the Hardware Status OK?……………………………………………………. Are the Network Connection Settings on Your PC OK?…………………….. Can You Ping the Router from PC?………………………………..……….… Are the ISP Settings OK?…………………………………………………...…. Back to Factory Default Setting………………………………………………… v 19 19 21 22 23 1. Introduction Highlights z Easy Internet-sharing of your broadband connection z Robust firewall to help protect your network from external attacks For G models: ® z Wireless LAN with data rate up to 108Mbps using Super G z technology Secure connection with advanced WPA2 encryption and authentication Model comparison chart: ADSL2/2+ Router Vigor2800Gi Vigor2800G Vigor2800i Vigor2800 * * * * High Speed Wireless AP * * - 1 ISDN * * - 1.1 Brief Overview Targeting requirement for residential, SOHO (Small Office and Home Office) and business users, the Vigor2800 series are ADSL2/2+ enabled integrated access device. With downstream speed up to 12Mbps (ADSL2) or 24Mbps (ADSL2+), the Vigor2800 series provide exceptional bandwidth* for Internet access. (*note: the available bandwidth also depends on the Internet Service Provider) Embedded with sophistic VPN firewall security features, the Vigor2800 series provide 32 dedicated virtual private data networks tunneling through public Internet. Powered by hardware-based DES/3DES engine, all the information transmitted is well encrypted. Hence Vigor2800 series can against any snooping without performance degraded when VPN is enabled. The Vigor2800 G models are embedded 802.11g compliant wireless module which provides wireless LAN access with line rate as much as 54Mbps. The Vigor2800 G models feature WPA2 (802.11i), wireless LAN isolation, WDS (Wireless Distribution System), and Universal VLAN™. The Vigor2800 i models provide ISDN backup, which keep your internet access alive even when ADSL internet access fails. 2 1.2 Specifications For Vigor2800 G models Super G TM ¾ Up to 108 Mbps data rate ** ¾ Utilizing adaptive radio to automatically identify clear channels ¾ Real-time hardware data compression TM ¾ Fast Frames and standards-compliant bursting Wireless Access Point IEEE802.11b/g compliant ¾ 64/128-bit WEP ¾ WPA/WPA2(IEEE802.11i) ¾ 802.1x authentication with RADIUS client VPN over WLAN Wireless client list Hidden SSID MAC address access control Access point discovery Wireless VLAN* Wireless LAN isolation Wireless client isolation Wireless rate-control* WDS (Wireless Distribution System) * *Actual data throughput will vary according to the network conditions and environmental factors, including volume of network traffic, network overhead and building materials. For Vigor2800 i models All models ISDN Euro ISDN compatible Automatic ISDN backup Support 64/128Kbps(multilink-PPP)/BOD (Bandwidth on Demand) Remote Dial-In/LAN-to-LAN connection Remote activation Virtual TA ADSL Compliant ADSL ¾ G.dmt (G.992.1) ¾ G.lite (G.992.2) ¾ ANSI T1.413 issue2 ADSL2 ¾ G.dmt.bis(G.992.3) ¾ G.lite.bis(G.992.4) ADSL2+(G.992.5) Up to 24Mbps downstream and 1Mbps upstream ATM Protocols Multiple Protocol over AAL5 (RFC 2684) PPP over Ethernet and AAL5 (RFC 2516,2364) Up to 8 PVC PPPoE pass through LAN/WLAN Transparent bridge for MPoA 3 VPN Up to 32 VPN tunnels Supported protocol: PPTP, IPSec, L2TP, L2TP over IPSec DHCP over IPSec(*) Encryption: AES, MPPE and hardware-based DES/3DES Authentication: MD5, SHA-1 IKE authentication: pre-shared key and digital signature(X.509)* LAN-to-LAN, Teleworker-to-LAN Network Features DHCP client/relay/server Dynamic DNS SNTP client Call scheduling RADIUS client DNS cache/proxy UPnP Routing protocol: ¾ Static routing ¾ RIP V2 Firewall Facilities IM/P2P blocking Multi-NAT, DMZ host, port-redirect/open port Rule-based packet filtering Stateful packet inspection DoS/DDoS protection IP address anti-spoofing E-mail alert and logging via syslog VPN pass through Router Management Web-based user interface (HTTP/HTTPS) Quick Start Wizard CLI (Command Line Interface, Telnet/SSH*) Administration access control Configuration backup/restore Built-in diagnostic function Firmware upgrade via TFTP/FTP Syslog SNMP management MIB-II QoS Class-based bandwidth guarantee by user-defined traffic categories Support 4 priority levels Support of DiffServ Code Point classifying Content Filtering URL blocking Java Applet, Cookies, Active X, compressed, executable, multimedia Time schedule control Printer Server One USB port connector Built-in LPR printer server Provide LPR printer for Windows 98/SE/ME Compatible with Windows 2000/XP/Server 2003/MAC OS 9/MAC OS X built-in LPR printer driver Power Consumption 15Watt Max. *future release 4 1.3 Front Panel LEDs and Rear Panel Interfaces 1.3.1 Vigor2800Gi LED ACT (Activity) ISDN Status blinking on blinking P2P on blinking on blinking on blinking on on orange Firewall WLAN DSL Printer LAN (P1, P2, P3, P4) green blinking Interface Printer PWR P1, P2, P3, P4 DSL ISDN Factory Reset Explanation The router is powered on and running properly. The ISDN network is correctly setup. A successful remote connection on the ISDN BRI B1/B2 channel. The P2P function is active When starting to prohibit P2P data The DoS function is enabled. When encountered DoS attacks. The wireless LAN function is enabled. Ethernet packets are transmitting over wireless LAN. The ADSL,ADSL2/2+ line is showtime. The USB interface printer is ready. A normal 10Mbps connection is through its corresponding port. A normal 100Mbps connection is through its corresponding port. Ethernet packets are transmitting. Description Connect to the USB printer. Connect the included power adapter to the power outlet. Connect to the local networked devices. Connect the ADSL,ADSL2/2+ line to access the Internet. Connect to the NT1 (or NT1+) box provided by ISDN service provider. Restore the default settings. Usage: Turn on the router (ACT LED is blinking), press the hole and keep for more than 5 seconds. When the ACT LED begins to blink rapidly, release the button. Then the router will restart with the factory default configuration. 5 1.3.2 Vigor2800G LED ACT (Activity) QoS P2P Firewall WLAN DSL Printer LAN (P1, P2, P3, P4) Interface Printer PWR P1, P2, P3, P4 DSL Factory Reset Status blinking on on blinking on blinking on blinking on on orange Explanation The router is powered on and running properly. The QoS function is active. The P2P function is active When starting to prohibit P2P data The DoS function is enabled. When encountered DoS attacks. The Wireless LAN function is enabled. Ethernet packets are transmitting over wireless LAN. The ADSL,ADSL2/2+ line is showtime. The USB interface printer is ready. A normal 10Mbps connection is through its corresponding port. green A normal 100Mbps connection is through its corresponding port. blinking Ethernet packets are transmitting. Description Connect to the USB printer. Connect the included power adapter to the power outlet. Connect to the local networked devices. Connect the ADSL,ADSL2/2+ line to access the Internet. Restore the default settings. Usage: Turn on the router (ACT LED is blinking), press the hole and keep for more than 5 seconds. When the ACT LED begins to blink rapidly, release the button. Then the router will restart with the factory default configuration. 6 1.3.3 Vigor2800i LED ACT (Activity) ISDN P2P Firewall VPN DSL Printer LAN (P1, P2, P3, P4) Interface Printer PWR P1, P2, P3, P4 DSL ISDN Factory Reset Status blinking on blinking Explanation The router is powered on and running properly. The ISDN network is correctly setup. A successful remote connection on the ISDN BRI B1/B2 channel. on The P2P function is active blinking When starting to prohibit P2P data on The DoS function is enabled. blinking When encountered DoS attacks. on The VPN tunnel is launched. on The ADSL,ADSL2/2+ line is showtime. on The USB interface printer is ready. orange A normal 10Mbps connection is through its corresponding port. green A normal 100Mbps connection is through its corresponding port. blinking Ethernet packets are transmitting. Description Connect to the USB printer. Connect the included power adapter to the power outlet. Connect to the local networked devices. Connect the ADSL,ADSL2/2+ line to access the Internet. Connect to the NT1 (or NT1+) box provided by ISDN service provider. Restore the default settings. Usage: Turn on the router (ACT LED is blinking), press the hole and keep for more than 5 seconds. When the ACT LED begins to blink rapidly, release the button. Then the router will restart with the factory default configuration. 7 1.3.4 Vigor2800 LED ACT (Activity) QoS P2P Firewall VPN DSL Printer LAN (P1, P2, P3, P4) Interface Printer PWR P1, P2, P3, P4 DSL Factory Reset Status blinking on on blinking on blinking on on on orange Explanation The router is powered on and running properly. The QoS function is active. The P2P function is active When starting to prohibit P2P data The DoS function is enabled. When encountered DoS attacks. The VPN function is active. The ADSL,ADSL2/2+ line is showtime. The USB interface printer is ready. A normal 10Mbps connection is through its corresponding port. green A normal 100Mbps connection is through its corresponding port. blinking Ethernet packets are transmitting. Description Connect to the USB printer. Connect the included power adapter to the power outlet. Connect to the local networked devices. Connect the ADSL,ADSL2/2+ line to access the Internet. Restore the default settings. Usage: Turn on the router (ACT LED is blinking), press the hole and keep for more than 5 seconds. When the ACT LED begins to blink rapidly, release the button. Then the router will restart with the factory default configuration. 8 1.4 Package Contains Quick Start Guide CD UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type power adapter RJ-45 Cable (Ethernet) RJ-45 to RJ-45 (ISDN) for Vigor2800 i models or RJ-11 Cable (Annex A / B) RJ-11 Cable (PSTN line) RJ-11 to RJ-45 (Annex B) Antennas for V2800 G models 9 2. Quick Install Your Vigor2800 Series Router 2.1 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. 1. Connect the DSL interface to the external ADSL splitter with an ADSL line cable. 2. Connect one port of 4-port switch to your computer with a RJ-45 cable. 3. For G models, connect detachable antennas to the router. 4. Connect the attached power adapter to the power port. 5. Check the ACT and WAN, LAN LEDs to assure network connections. (Regarding the detailed LED status explanation, please refer to section 1.3) 10 2.2 Configure Your Router via Quick Start Wizard Introduction The Quick Start Wizard is designed for you to easily set up your broadband Internet access. You can directly access the Quick Start Wizard via Web Configurator. Configure Your Router via Quick Start Wizard Step 1. First make sure your PC connects to router correctly. You may either simply set up your PC to dynamic get IP from router or set up the IP address of PC to be the same subnet as the default IP address of Vigor router 192.168.1.1. If you don’t know how, please refer to Trouble Shooting. Then open the web browser on the PC. Type http://192.168.1.1. If your link is successful, a pop-up window will open to ask for username and password. Leave the default null value and press OK to continue. If you fail to access to the web configuration, please refer to “Trouble Shooting” guide. Step 2. The Main Menu will pop out after completing previous step. 11 Step 3. Now Quick Start Wizard is switched on. Enter login password. Then click Next to continue. Step 4 Step 5 Select the appropriate Internet access type according to the information from your ISP. Or Clicking “Auto detect” button also offers the related DSL parameters automatically. If PPPoE/PPPoA is selected, please manually enter the Username/Password provided by your ISP service provider. Checking the Always On means Internet access is always on regardless of Internet usage. 12 Step 6 Review the summary of settings. On the bottom of Web Configurator window, you can find messages showing the system interaction with you. z “Ready” indicates the system is ready for you to input settings. z “Settings Saved” means your settings are saved once you click “Finish” or “OK” button. 13 3. Wireless LAN Settings(for G models) Select from the menu of the Wireless LAN: Wireless LAN >> General Settings Security Access Control WDS Settings Access Point Discovery Station List (The default value of Frequency Domain was set by factory depends on the reselling region.) Wireless Distribution System Wireless Distribution System(WDS) is an advanced technology to link 2 LANs or 2 WLANs through air, if router is set in Bridge Mode, or to extend a Wireless LAN coverage area, if router is set in Repeater Mode Example Application 1 Example Application 2 14 3.1 General Settings Click General Settings to configure the Service Set Identifier (SSID) and wireless channel. 1. Enable Wireless LAN: Check the box to enable wireless function. 2. Mode: Select an appropriate wireless mode. The radio can support both IEEE802.11b, IEEE802.11g and Mixed (11b+11g+SuperG) Super G protocols simultaneously. Super G only The radio can support both IEEE802.11b and IEEE802.11g protocols simultaneously. The radio only supports Super G protocol. 11g-only The radio only supports IEEE802.11g protocol. 11b-only The radio only supports IEEE802.11b protocol. Mixed (11b+11g) 3. Scheduler: Set the wireless LAN to work at some time interval only. Choose up to 4 out of 15 schedules as defined in Applications > Call Schedule Setup. 4. SSID and Channel: The default SSID is "default". We suggest you change it to a particular name. SSID(service set It is used to name the wireless LAN, and must have the same content in client PC/notebook wireless card(s). SSID identifier) can be any text numbers or various special characters. A wireless channel for the router. The default channel is 6. Channel You can change it to more appropriate one if the selected channel is under serious interference. 5. Hide SSID: Check it to be invisible against other’s malicious scanning. 15 3.2 Security Click Security to configure the security options. 1. Mode: Select an appropriate encryption to improve the security and privacy of your wireless data packets. Disable Turn off the encryption mechanism. WEP Only Accepts only WEP clients and the encryption key should be entered in WEP Key. WEP/802.1x Only Accepts only WEP clients. The authentication will be 802.1x and the encryption key will be automatically negotiated. Please set RADIUS server. WEP or WPA/PSK Accepts WEP and WPA clients simultaneously and the encryption key should be entered in WEP Key and PSK respectively. WEP/802.1x or WPA/802.1x Accepts only WEP or WPA clients. The authentication will be 802.1x and the encryption key will be automatically negotiated. Please set RADIUS server. WPA/PSK Only Accepts only WPA clients and the encryption key should be entered in PSK. 16 WPA/802.1x Only Accepts only WPA clients. The authentication will be 802.1x and the encryption key will be automatically negotiated. Please set RADIUS server. 2. WPA: If you select WPA in Mode, then select the Type of WPA here. Type Select from Mixed(WPA+WPA2) or WPA2 only. Pre-Shared Key(PSK) Either 8~63 ASCII characters or 64 Hexadecimal digits leading by 0x can be entered. For example "0123456789ABCD...." or "0x321253abcde.....". 3. WEP: 64-Bit Either 5 ASCII characters or 10 hexadecimal digitals leading by 0x can be entered. For example, ABCDE or 0x4142434445. 128-Bit Either 13 ASCII characters or 26 hexadecimal digits leading by 0x can be entered. For example, ABCDEFGHIJKLM or 0x4142434445464748494A4B4C4D. To communicate, all wireless devices must support the same encryption bit size and have the same key. If WEP, only one key out of four preset keys can be selected at one time. 3.3 WDS Settings Click WDS Settings to configure the WDS functions. 17 Mode: Disable Turn off the WDS function. Bridge To set this router as in Bridge Mode, which links its LAN/WLAN to either peer Bridge Mode router’s LAN/WLAN or peer Repeater Mode router. Set peer MAC address at the right column accordingly. Repeater To set this router as in Repeater Mode, which forwards packets sending from peer router. Set peer MAC address at the right column accordingly. 1. Security Select an appropriate encryption to improve the security and privacy of your WDS data packets. Disable No encryption will be applied. WEP Choose from using the same current WEP key which has been set in Security Settings or setting a new key. Pre-shared key Set a pre-shared key in TKIP or (AES-)CCMP encryption. Type 8~63 ASCII characters or 64 hexadecimal digits leading by "0x", for example "cfgs01a2..." or "0x655abcd....". 2. Access from local WLAN clients Tick to prohibit access from local WLAN clients. 3. Status Send a message to test the link. 18 4. Trouble Shooting This section will guide you to solve abnormal situations. Please follow the below steps to check your basic installation. Step 1. Is the Hardware Status OK? 1. Check the power line and WLAN/LAN cable connections. Refer to the Quick Start Guide “2.1 Hardware Installation” section for details. 2. Turn on the router, check if the ACT LED blink once per second and the correspondent LAN LED is bright. Step 2. Are the Network Connection Settings on Your PC OK? The following example is based on Windows XP case. Regarding to the examples of other OSs, please refer to the similar steps or find support notes in www.draytek.com. 1. Go to Control Panel and then double-click on Network Connections. 2. Right-click on Local Area Connection and click on Properties. 19 3. Select on Internet Protocol (TCP/IP) and then click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically. 20 Step 3 Can You Ping the Router from PC? The default gateway IP address of the router is 192.168.1.1. Please check that if you can ping the router correctly. For Windows 1. Open the Command Prompt window (from start menu> Run ) 2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/ 2000/XP). 3. Type ping 192.168.1.1 and press [Enter] For Mac (Terminal) The important thing is that the computer receives a reply from 192.168.1.1. If not, please check the IP address of your PC. We suggest you set the network connection as get IP automatically. (Please refer to the Step 2) 21 Step 4 Are the ISP Settings OK? Click Internet Access Setup group and then check whether the ISP settings are set correctly. For PPPoE/PPPoA Users 1. Check that if the Enable option is selected. 2. Verify if all parameters of DSL Modem Settings are entered with correct value which given by your ISP. 3. Verify if Username and Password are entered with correct value which given by your ISP. For MPoA (RFC1483/2684) Users 1. Check that if the Enable option is selected. 2. Verify if all parameters of DSL Modem Settings are entered with correct value which given by your ISP. 3. Verify if IP Address, Subnet Mask and Gateway are set correctly, or that your ISP requires using DHCP clients to obtain IP automatically. 22 Step 5. Back to Factory Default Setting Warning: After pressing the "factory default setting", you will loose all settings you did before. Make sure you have recorded all useful settings. The password of factory default is null. Software Reset You can also reset router to factory default via Web configurator. Hardware Reset While the router is running (ACT LED blinking), press the button and hold for more than 5 seconds. The ACT LED begins to blink rapidly, then release the button. The router will restart with the factory default configuration. After restore the factory default setting, please repeat Step 1 to Step 4 to reinstall the router. Configure the router according to your recorded settings. If the router does not work correctly, please contact your dealer for help. For any further questions, please send e-mail to support@draytek.com 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 29 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:5d7c4c90-f804-4b68-a7fe-701ba9dac0cb Modify Date : 2005:08:23 15:43:02+08:00 Create Date : 2005:08:23 15:42:59+08:00 Metadata Date : 2005:08:23 15:43:02+08:00 Document ID : uuid:6f1fff64-9ea7-4011-953e-7b3fa296e75f Format : application/pdf Creator : CorelDRAW Version 10.0.ࠀ܀Ѐࠀ렁㌁렁㌁ Producer : Adobe Acrobat 6.0EXIF Metadata provided by EXIF.tools