Draytek V2860VN VDSL2 Security Firewall User Manual

Draytek Corporation VDSL2 Security Firewall

User manual

Vigor2860 Series Quick Start GuideiVigor2860 SeriesVDSL2 Security FirewallQuick Start GuideVersion: 1.0Firmware Version: V3.7.1_RC3(For future update, please visit DrayTek web site)Date: 17/01/2013
Vigor2860 Series Quick Start Guide iCopyright InformationCopyrightDeclarationsCopyright 2013 All rights reserved. This publication contains information that isprotected by copyright. No part may be reproduced, transmitted, transcribed, stored in aretrieval system, or translated into any language without written permission from thecopyright holders.Trademarks The following trademarks are used in this document: Microsoft is a registered trademark of Microsoft Corp. Windows, Windows 95, 98, Me, NT, 2000, XP, 7 and Explorer are trademarks ofMicrosoft Corp. Apple and Mac OS are registered trademarks of Apple Computer Inc. Other products may be trademarks or registered trademarks of their respectivemanufacturers.Safety Instructions and ApprovalSafety Instructions Read the installation guide thoroughly before you set up the router. The router is a complicated electronic unit that may be repaired only be authorizedand qualified personnel. Do not try to open or repair the router yourself. Do not place the router in a damp or humid place, e.g. a bathroom. Do not stack the routers. The router should be used in a sheltered area, within a temperature range of +5 to+40 Celsius. Do not expose the router to direct sunlight or other heat sources. The housing andelectronic components may be damaged by direct sunlight or heat sources. Do not deploy the cable for LAN connection outdoor to prevent electronic shockhazards. Keep the package out of reach of children. When you want to dispose of the router, please follow local regulations onconservation of the environment.Warranty We warrant to the original end user (purchaser) that the router will be free from anydefects in workmanship or materials for a period of two (2) years from the date ofpurchase from the dealer. Please keep your purchase receipt in a safe place as it serves asproof of date of purchase. During the warranty period, and upon proof of purchase,should the product have indications of failure due to faulty workmanship and/ormaterials, we will, at our discretion, repair or replace the defective products orcomponents, without charge for either parts or labor, to whatever extent we deemnecessary tore-store the product to proper operating condition. Any replacement willconsist of a new or re-manufactured functionally equivalent product of equal value, andwill be offered solely at our discretion. This warranty will not apply if the product ismodified, misused, tampered with, damaged by an act of God, or subjected to abnormalworking conditions. The warranty does not cover the bundled or licensed software ofother vendors. Defects which do not significantly affect the usability of the product willnot be covered by the warranty. We reserve the right to revise the manual and onlinedocumentation and to make changes from time to time in the contents hereof withoutobligation to notify any person of such revision or changes.Be a RegisteredOwnerWeb registration is preferred. You can register your Vigor router viahttp://www.draytek.com.Firmware & ToolsUpdatesDue to the continuous evolution of DrayTek technology, all routers will be regularlyupgraded. Please consult the DrayTek web site for more information on newest firmware,tools and documents.http://www.draytek.com
Vigor2860 Series Quick Start GuideiEuropean Community DeclarationsManufacturer: DrayTek Corp.Address: No. 26, Fu Shing Road, Hukou Township, Hsinchu Industrial Park, Hsinchu County,Taiwan 303Product: Vigor2860 Series RouterDrayTek Corp. declares that Vigor2860 Series of routers are in compliance with the following essentialrequirements and other relevant provisions of R&TTE 1999/5/EC, ErP 2009/125/EC and RoHS 2011/65/EU.The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EECby complying with the requirements set forth in EN55022/Class B and EN55024/Class B.The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with therequirements set forth in EN60950-1.Regulatory InformationFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device may accept any interference received, including interference that may cause undesired operation.Caution: Changes or modifications of this equipment not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.This equipment must be installed and operated with a separation distance of at least 20 cm from all persons.The operation frequency of the device in the 5150-5250 MHz band is for indoor use only.Please visit http://www.draytek.com/user/SupportDLRTTECE.php This product is designed for the DSL and 2.4GHz / 5GHz WLAN network throughout the EC region. Please seethe user manual for the applicable networks on your product.
Vigor2860 Series Quick Start Guide iTTaabbllee ooff CCoonntteennttss1. Introduction ....................................................................................... 11.1 Panel Explanation................................................................................................21.1.1 For Vigor2860.....................................................................................................21.1.2 For Vigor2860n...................................................................................................41.1.3 For Vigor2860Vn-plus.........................................................................................61.1.4 For Vigor2862.....................................................................................................91.1.5 For Vigor2862n.................................................................................................111.1.6 For Vigor2862Vn-plus.......................................................................................131.1.7 For Vigor2863...................................................................................................161.1.8 For Vigor2863n.................................................................................................181.1.9 For Vigor2863Vn ..............................................................................................201.1.10 For Vigor2925.................................................................................................221.1.11 For Vigor2925n...............................................................................................241.1.12 For Vigor2925Vn-plus.....................................................................................261.2 Package Content ...............................................................................................292. Installing Your Router..................................................................... 312.1 Hardware Installation ........................................................................................312.2 Printer Installation .............................................................................................343. Initial Settings ................................................................................. 423.1 Accessing Web Page ........................................................................................423.2 Basic Configuration – Quick Start Wizard.......................................................433.2.1 For WAN1 (ADSL/VDSL)..................................................................................453.2.2 For WAN2 (Ethernet)........................................................................................493.2.3 For WAN3 (USB) ..............................................................................................573.3 Wireless Configuration .....................................................................................583.3.1 Basic Wireless LAN Concept............................................................................583.3.2 General Setup ..................................................................................................593.3.3 Security Settings...............................................................................................604. Trouble Shooting ............................................................................ 624.1 Checking If the Hardware Status Is OK or Not................................................624.2 Checking If the Network Connection Settings on Your Computer Is OK orNot ............................................................................................................................63
Vigor2860 Series Quick Start Guide54.3 Pinging the Router from Your Computer.........................................................664.4 Checking If the ISP Settings are OK or Not.....................................................674.5 Backing to Factory Default Setting If Necessary ............................................674.6 Contacting Your Dealer.....................................................................................69
Vigor2860 Series Quick Start Guide1Vigor2860 series is a VDSL2 router with multi-subnet for secure and efficientworkgroup management. It integrates IP layer QoS, NAT session/bandwidthmanagement to help users control works well with large bandwidth.By adopting hardware-based VPN platform and hardware encryption ofAES/DES/3DES, and hardware key hash of SHA-1/MD5, the router increasesthe performance of VPN greatly and offers several protocols (such asIPSec/PPTP/L2TP) with up to 32 VPN tunnels.The object-based design used in SPI (Stateful Packet Inspection) firewall allowsusers to set firewall policy with ease. CSM (Content Security Management)provides users control and management in IM (Instant Messenger) and P2P(Peer to Peer) more efficiency than before. In addition, DoS/DDoS preventionand URL/Web content filter strengthen the security outside and control inside.Vigor2860 series supports USB interface for connecting USB printer to shareprinting function, 3G USB modem for network connection, or connectivity fornetwork FTP service.
Vigor2860 Series Quick Start Guide211..11..11 FFoorr VViiggoorr22886600LED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USB(1-2)Blinking The data is transmitting.On Internet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSLBlinking Slowly: The DSL connection is ready.Quickly: The connection is training.VPN On The VPN tunnel is active.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DoS/DDoS function is active.DoSBlinking It will blink while detecting an attack.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.GigaLAN1~6RightLED Off The port is connected with 10/100Mbps
Vigor2860 Series Quick Start Guide3Interface DescriptionFactory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).VDSL/ADSL Connecter for accessing the Internet.WAN2 Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide411..11..22 FFoorr VViiggoorr22886600nnLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point is ready.WLANBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)OnInternet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSLBlinking Slowly: The DSL connection is ready.Quickly: The connection is training.VPN On The VPN tunnel is active.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DoS/DDoS function is active.DoSBlinking It will blink while detecting an attack.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsGigaLANLeft On The port is connected.
Vigor2860 Series Quick Start Guide5Off The port is disconnected.Blinking The data is transmitting.On The port is connected with 1000Mbps.RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).VDSL/ADSL Connecter for accessing the Internet.WAN2 (Giga) Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide611..11..33 FFoorr VViiggoorr22886600VVnn--pplluussLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point with transmission rateof 2.4G is ready.2.4GBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On Internet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSLBlinking Slowly: The DSL connection is ready.Quickly: The connection is training.On Wireless access point with transmission rateof 5G is ready.5GBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On A PSTN phone call comes (in and out).However, when the phone call isdisconnected, the LED will be off.LineOff There is no PSTN phone call.
Vigor2860 Series Quick Start Guide7On The phone connected to this port is off-hook.Off The phone connected to this port is on-hook.Phone (1-2)Blinking A phone call comes.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.GigaLAN1~6RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).
Vigor2860 Series Quick Start Guide8VDSL2/ADSL Connecter for accessing the Internet.WAN2 (Giga) Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.Phone 1/2 Connecter for analog phone(s).Line Connector for PSTN life line.PWR Connecter for a power adapter.
Vigor2860 Series Quick Start Guide911..11..44 FFoorr VViiggoorr22886622LED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USB(1-2)Blinking The data is transmitting.On Internet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSL(1-2)Blinking Slowly: The DSL connection is ready.Quickly: The connection is training.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DoS/DDoS function is active.DoSBlinking It will blink while detecting an attack.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.GigaLAN1~6RightLED Off The port is connected with 10/100Mbps
Vigor2860 Series Quick Start Guide10Interface DescriptionFactory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).VDSL/ADSL Connecter for accessing the Internet.WAN2 Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide1111..11..55 FFoorr VViiggoorr22886622nnLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point is ready.WLANBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On Internet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSL(1-2)Blinking Slowly: The DSL connection is ready.Quickly: The connection is training.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DoS/DDoS function is active.DoSBlinking It will blink while detecting an attack.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsOn The port is connected.GigaLANLeftLED Off The port is disconnected.
Vigor2860 Series Quick Start Guide12Blinking The data is transmitting.On The port is connected with 1000Mbps.RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).VDSL/ADSL Connecter for accessing the Internet.WAN2 (Giga) Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide1311..11..66 FFoorr VViiggoorr22886622VVnn--pplluussLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point with transmission rateof 2.4G is ready.2.4GBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On Internet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSLBlinking Slowly: The DSL connection is ready.Quickly: The connection is training.On Wireless access point with transmission rateof 5G is ready.5GBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On A PSTN phone call comes (in and out).However, when the phone call isdisconnected, the LED will be off.LineOff There is no PSTN phone call.
Vigor2860 Series Quick Start Guide14On The phone connected to this port is off-hook.Off The phone connected to this port is on-hook.Phone (1-2)Blinking A phone call comes.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.LAN(1~6)RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).
Vigor2860 Series Quick Start Guide15VDSL2/ADSL Connecter for accessing the Internet.WAN2 (Giga) Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.Phone 1/2 Connecter for analog phone(s).Line Connector for PSTN life line.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide1611..11..77 FFoorr VViiggoorr22886633LED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USB(1-2)Blinking The data is transmitting.OnInternet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSL(1-2)Blinking Slowly: The DSL connection is ready.Quickly: The connection is training.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DoS/DDoS function is active.DoSBlinking It will blink while detecting an attack.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.GigaLAN1~6RightLED Off The port is connected with 10/100Mbps
Vigor2860 Series Quick Start Guide17Interface DescriptionFactory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).VDSL/ADSL Connecter for accessing the Internet.WAN2 Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide1811..11..88 FFoorr VViiggoorr22886633nnLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point is ready.WLANBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On Internet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSL(1-2)Blinking Slowly: The DSL connection is ready.Quickly: The connection is training.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DoS/DDoS function is active.DoSBlinking It will blink while detecting an attack.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN2(Giga)RightLED Off The port is connected with 10/100MbpsOn The port is connected.GigaLAN(1~6)LeftLED Off The port is disconnected.
Vigor2860 Series Quick Start Guide19Blinking The data is transmitting.On The port is connected with 1000Mbps.RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).VDSL/ADSL Connecter for accessing the Internet.WAN2 (Giga) Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide2011..11..99 FFoorr VViiggoorr22886633VVnnLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point is ready.WLANBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On Internet connection is ready.Off Internet connection is not ready.WAN2Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSL(1-2)Blinking Slowly: The DSL connection is ready.Quickly: The connection is training.On A PSTN phone call comes (in and out).However, when the phone call isdisconnected, the LED will be off.LineOff There is no PSTN phone call.On The phone connected to this port is off-hook.Off The phone connected to this port is on-hook.Phone(1-2)Blinking A phone call comes.LED on ConnectorOn The port is connected.Off The port is disconnected.WAN2LeftLEDBlinking The data is transmitting.
Vigor2860 Series Quick Start Guide21On The port is connected with 1000Mbps.RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.GigaLAN(1~6)RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).VDSL/ADSL Connecter for accessing the Internet.WAN2 (Giga) Connecter for local network devices or modem foraccessing Internet.GigaLAN (1-6) Connecters for local network devices.Phone 1/2 Connecter for analog phone(s).Line Connector for PSTN life line.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide2211..11..1100 FFoorr VViiggoorr22992255LED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USB(1-2)Blinking The data is transmitting.On Internet connection is ready.Off Internet connection is not ready.WAN(1-2)Blinking The data is transmitting.VPN On The VPN tunnel is active.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DMZ function is enabled.Off The DMZ function is disabled.DMZBlinking The data is transmitting.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN(1-2)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.LAN(1-5)RightLED Off The port is connected with 10/100Mbps
Vigor2860 Series Quick Start Guide23Interface DescriptionFactory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB(1-2) Connecter for a USB device (for 3G USB Modem orprinter).WAN(1-2) Connecter for local network devices or modem foraccessing Internet.LAN(1-5) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide2411..11..1111 FFoorr VViiggoorr22992255nnLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.OnUSB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point is ready.WLANBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On Internet connection is ready.Off Internet connection is not ready.WAN(1-2)Blinking The data is transmitting.VPN On The VPN tunnel is active.QoS On The QoS function is active.WCF On The Web Content Filter is active. (It isenabled from Firewall >> General Setup).On The DMZ function is enabled.Off The DMZ function is disabled.DMZBlinking The data is transmitting.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN(1-2)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LANLeftLEDBlinking The data is transmitting.
Vigor2860 Series Quick Start Guide25On The port is connected with 1000Mbps.RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB(1-2) Connecter for a USB device (for 3G USB Modem orprinter).WAN(1-2) Connecter for local network devices or modem foraccessing Internet.LAN(1-5) Connecters for local network devices.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide2611..11..1122 FFoorr VViiggoorr22992255VVnn--pplluussLED Status ExplanationBlinking The router is powered on and runningnormally.ACT (Activity)Off The router is powered off.On USB device is connected and ready for use.USBBlinking The data is transmitting.On Wireless access point with transmission rateof 2.4G is ready.2.4GBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On Internet connection is ready.Off Internet connection is not ready.WAN(1-2)Blinking The data is transmitting.On The router is ready to access Internet throughDSL link.DSLBlinking Slowly: The DSL connection is ready.Quickly: The connection is training.On Wireless access point with transmission rateof 5G is ready.5GBlinking It will blink slowly while wireless traffic goesthrough.ACT and WLAN LEDs blink quickly andsimultaneously when WPS is working, andwill return to normal condition after twominutes. (You need to setup WPS within 2minutes.)On A PSTN phone call comes (in and out).However, when the phone call isdisconnected, the LED will be off.LineOff There is no PSTN phone call.
Vigor2860 Series Quick Start Guide27On The phone connected to this port is off-hook.Off The phone connected to this port is on-hook.Phone 1/2Blinking A phone call comes.LED on ConnectorOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.WAN(1-2)RightLED Off The port is connected with 10/100MbpsOn The port is connected.Off The port is disconnected.LeftLEDBlinking The data is transmitting.On The port is connected with 1000Mbps.LAN(1-5)RightLED Off The port is connected with 10/100MbpsInterface DescriptionWireless LANON/OFF/WPSPress "Wireless LAN ON/OFF/WPS" button once towait for client device making network connectionthrough WPS.Press "Wireless LAN ON/OFF/WPS" button twice toenable (WLAN LED on) or disable (WLAN LED off)wireless connection.Factory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep formore than 5 seconds. When you see the ACT LEDbegins to blink rapidly than usual, release the button.Then the router will restart with the factory defaultconfiguration.USB Connecter for a USB device (for 3G USB Modem orprinter).
Vigor2860 Series Quick Start Guide28WAN(1-2) Connecter for local network devices or modem foraccessing Internet.LAN (1-5) Connecters for local network devices.Phone 1/2 Connecter for analog phone(s).Line Connector for PSTN life line.PWR Connecter for a power adapter.ON/OFF Power Switch.
Vigor2860 Series Quick Start Guide29
Vigor2860 Series Quick Start Guide30Quick Start GuideCD RJ-45 Cable (Ethernet) Antenna (n models) Analog phone adapter(V models & V2862/2863) Antenna (n-plus models) The type of the power adapter depends on the country that the router will beinstalled:UK-type Power Adapter EU-type Power Adapter
Vigor2860 Series Quick Start Guide31USA/Taiwan-type PowerAdapterAU/NZ-type Power Adapter* The maximum power consumption is 24 Watt.
Vigor2860 Series Quick Start Guide32This section will guide you to install the router through hardware connection andconfigure the router’s settings through web browser.Before starting to configure the router, you have to connect your devicescorrectly. (Take Vigor2860Vn as an example)  Use one end of the DSL line cable to VDSL/ADSL port on the router tothe land line jack on the wall.  Connect one end of an Ethernet cable (RJ-45) to one of the LAN portsof the router and the other end of the cable (RJ-45) into the Ethernet port onyour computer.  Connect the telephone set with phone lines (for using VoIP function).For the model without phone ports, skip this step. Connect one end of the power adapter to the router’s power port on therear panel, and the other side into a wall outlet. Power on the device by pressing down the power switch on the rearpanel. The system starts to initiate. After completing the system test, the ACTLED will light up and start blinking.
Vigor2860 Series Quick Start Guide33Possible connection for Vigor2862Vn-plus can be seen from the followingillustration.Possible connection for Vigor2863Vn-plus can be seen from the followingillustration.
Vigor2860 Series Quick Start Guide34Possible connection for Vigor2925n can be seen from the following illustration.Possible connection for Vigor2925Vn-plus can be seen from the followingillustration.
Vigor2860 Series Quick Start Guide35You can install a printer onto the router for sharing printing. All the PCsconnected this router can print documents via the router. The example providedhere is made based on Windows XP/2000. For Windows 98/SE/Vista, pleasevisit www.draytek.com.Before using it, please follow the steps below to configure settings for connectedcomputers (or wireless clients).  Connect the printer with the router through USB port.  Open Start->Settings-> Printers and Faxes.  Open File->Add a New Computer. A welcome dialog will appear.Please click Next.
Vigor2860 Series Quick Start Guide36  Click Local printer attached to this computer and click Next. In this dialog, choose Create a new port Type of port and use the dropdown list to select Standard TCP/IP Port. Click Next.
Vigor2860 Series Quick Start Guide37 In the following dialog, type 192.168.1.1 (router’s LAN IP) in the fieldof Printer Name or IP Address and type IP_192.168.1.1 as the port name.Then, click Next.  Click Standard and choose Generic Network Card.
Vigor2860 Series Quick Start Guide38  Then, in the following dialog, click Finish.  Now, your system will ask you to choose right name of the printer thatyou installed onto the router. Such step can make correct driver loaded onto yourPC. When you finish the selection, click Next.
Vigor2860 Series Quick Start Guide39   For the final stage, you need to go back to Control Panel->Printers and edit the property of the new printer you have added. Select "LPR" on Protocol, type p1 (number 1) as Queue Name.Then click OK. Next please refer to the red rectangle for choosing the correctprotocol and LPR name.
Vigor2860 Series Quick Start Guide40The printer can be used for printing now. Most of the printers with differentmanufacturers are compatible with vigor router.Note 1: Some printers with the fax/scanning or other additional functions are notsupported. If you do not know whether your printer is supported or not, pleasevisit www.draytek.com to find out the printer list. Open Support >FAQ; findout the link of Printer Server and click it.Then, click the What types of printers are compatible with Vigor router?link.
Vigor2860 Series Quick Start Guide41Note 2: Vigor router supports printing request from computers via LAN portsbut not WAN port.
Vigor2860 Series Quick Start Guide42This page is left blank.
Vigor2860 Series Quick Start Guide43To access Internet, please finish basic configuration after completing thehardware installation. !!1. Make sure your PC connects to the router correctly.2. Notice: You may either simply set up your computer to get IPdynamically from the router or set up the IP address of thecomputer to be the same subnet as the default IP address ofVigor router 192.168.1.1. For the detailed information, pleaserefer to the later section - Trouble Shooting of the guide.3. Open a web browser on your PC and type http://192.168.1.1. Thefollowing window will be open to ask for username and password. Please type“admin/admin” on Username/Password and click Login.Notice: If you fail to access to the web configuration, please go to“Trouble Shooting” for detecting and solving your problem.4. Now, the Main Screen will pop up.5. The web page can be logged out according to the chosen condition. Thedefault setting is Auto Logout, which means the web configuration system willlogout after five minutes without any operation. Change the setting for your
Vigor2860 Series Quick Start Guide44necessity.""##$$%% &&The Quick Start Wizard is designed for you to easily set up your router forInternet access. You can directly access the Quick Start Wizard via Web UserInterface.The home page will change slightly in accordance with the router model youhave.
Vigor2860 Series Quick Start Guide45If your router can be under an environment with high speed NAT, theconfiguration provide here can help you to deploy and use the router quickly.The first screen of Quick Start Wizard is entering login password. After typingthe password, please click Next.On the next page as shown below, please select the WAN interface that you use.If DSL interface is used, please choose WAN1; if Ethernet interface is used,please choose WAN2; if 3G USB modem is used, please choose WAN3. Thenclick Next for next step.WAN1, WAN2 and WAN3 will bring up different configuration page. Refer tothe following for detailed information.
Vigor2860 Series Quick Start Guide4633..22..11 FFoorr WWAANN11 ((AADDSSLL//VVDDSSLL))WAN1 is specified for ADSL or VDSL connection.Click Next to go to the following page. You have to select the appropriateInternet access type according to the information from your ISP. For example,you should select PPPoE mode if the ISP provides you PPPoE interface. Inaddition, the field of For ADSL Only will be available only when ADSL isdetected. Then click Next for next step.
Vigor2860 Series Quick Start Guide47PPPPPPooEE//PPPPPPooAA1. Choose WAN1 as WAN Interface and click the Next button; you willget the following page.2. After finished the above settings, simply click Next.
Vigor2860 Series Quick Start Guide483. Please manually enter the Username/Password provided by your ISP.Then click Next for viewing summary of such connection.4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.Then, the system status of this protocol will be shown.55.. Now, you can enjoy surfing on the Internet.MMPPooAA // SSttaattiicc oorr DDyynnaammiicc IIPP1. Choose WAN1 as WAN Interface and click the Next button; you willget the following page.
Vigor2860 Series Quick Start Guide492. Please type in the IP address/mask/gateway information originallyprovided by your ISP. Then click Next for viewing summary of suchconnection.3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.Then, the system status of this protocol will be shown.4. Now, you can enjoy surfing on the Internet.
Vigor2860 Series Quick Start Guide5033..22..22 FFoorr WWAANN22 ((EEtthheerrnneett))WAN2 is dedicated to physical mode in Ethernet. If you choose WAN2, pleasespecify physical type. Then, click Next.On the next page as shown below, please select the appropriate Internet accesstype according to the information from your ISP. For example, you should selectPPPoE mode if the ISP provides you PPPoE interface. Then click Next for nextstep.PPPPPPooEE  Choose WAN2 as the WAN Interface and click the Next button. Thefollowing page will be open for you to specify Internet Access Type.
Vigor2860 Series Quick Start Guide51  Click PPPoE as the Internet Access Type. Then click Next to continue.  Please manually enter the Username/Password provided by your ISP.Click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet.
Vigor2860 Series Quick Start Guide52PPPPTTPP//LL22TTPP  Choose WAN2 as the WAN Interface and click the Next button. Thefollowing page will be open for you to specify Internet Access Type.  Click PPTP/L2TP as the Internet Access Type. Then click Next tocontinue.
Vigor2860 Series Quick Start Guide53  Please type in the IP address/mask/gateway information originallyprovided by your ISP. Then click Next for viewing summary of suchconnection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet.
Vigor2860 Series Quick Start Guide54SSttaattiicc IIPP  Choose WAN2 as the WAN Interface and click the Next button. Thefollowing page will be open for you to specify Internet Access Type.  Click Static IP as the Internet Access type. Simply click Next tocontinue.
Vigor2860 Series Quick Start Guide55  Please type in the IP address information originally provided by yourISP. Then click Next for next step. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet.
Vigor2860 Series Quick Start Guide56DDHHCCPP  Choose WAN2 as WAN Interface and click the Next button. Thefollowing page will be open for you to specify Internet Access Type.  Click DHCP as the Internet Access type. Simply click Next to continue.
Vigor2860 Series Quick Start Guide57  After finished the settings above, click Next for viewing summary ofsuch connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet.
Vigor2860 Series Quick Start Guide5833..22..33 FFoorr WWAANN33 ((UUSSBB))1. Choose WAN3 as WAN Interface.2. Then, click Next for viewing summary of such connection.3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.Then, the system status of this protocol will be shown.44.. Now, you can enjoy surfing on the Internet.
Vigor2860 Series Quick Start Guide59 ##For the user of Vigor2860, please skip this section.For operating Vigor2860n/Vigor2860Vn well, it is necessary for you to set thewireless LAN settings for using wireless function. Please read the followingsection carefully for configuring the settings for this router.(The default value of Frequency Domain was set by factory depends on thereselling region.)33..33..11 BBaassiicc WWiirreelleessss LLAANN CCoonncceeppttIn an Infrastructure Mode of wireless network, Vigor wireless router plays a roleas an Access Point (AP) connecting to lots of wireless clients or Stations (STA).All the STAs (clients) will share the same Internet connection with other wiredhosts via Vigor wireless router.
Vigor2860 Series Quick Start Guide6033..33..22 GGeenneerraall SSeettuupp  On the Wireless LAN group, select General Setup. The following pagewill be shown.  Check Enable Wireless LAN to enable the wireless function.  At present, the router can connect to 11n Only, 11g Only, Mixed(11b+11g), Mixed (11a+11n), Mixed (11g+11n), and Mixed (11b+11g+11n)stations simultaneously. Simply choose Mixed (11b+11g+11n) mode. Type in the name of the SSID. The default name for SSID is DrayTek.We suggest you to change it with a particular name. Click OK to save the configuration.
Vigor2860 Series Quick Start Guide6133..33..33 SSeeccuurriittyy SSeettttiinnggss1. On the Wireless LAN group, select Security.2. The default security mode is Mixed (WPA+WPA2)/PSK. For thewireless client who wants to access into Internet through such router, pleaseinput the default PSK value for connection.Default Pre-Shared Key (PSK) with 13 ASCII characters is provided andstated on the label pasted on the bottom of the router.
Vigor2860 Series Quick Start Guide623. Click OK to save settings.Be aware that for the communication, all wireless devices must support the sameencryption bit length and share the same key. If WEP mode is selected, only oneof four preset keys can be selected at one time.
Vigor2860 Series Quick Start Guide63''((!!))This section will guide you to solve abnormal situations if you cannot accessinto the Internet after installing the router and finishing the web configuration.Please follow sections below to check your basic installation status stage bystage. Checking if the hardware status is OK or not. Checking if the network connection settings on your computer are OKor not. Pinging the router from your computer. Checking if the ISP settings are OK or not. Backing to factory default setting if necessary.If all above stages are done and the router still cannot run normally, it is the timefor you to contact your dealer for advanced help.''))##))**++,,Follow the steps below to verify the hardware status.1. Check the power line and LAN cable connections. Refer to “2.1Hardware Installation” for details.2. Turn on the router. Make sure the ACT LED blink once per second andthe correspondent LAN LED is bright.33.. If not, it means that there is something wrong with the hardware status.Simply back to “2.1 Hardware Installation” to execute the hardwareinstallation again. And then, try again.
Vigor2860 Series Quick Start Guide64''))##)),,--**++,,Sometimes the link failure occurs due to the wrong network connection settings.After trying the above section, if the link is stilled failed, please do the stepslisted below to make sure the network connection settings is OK.FFoorr WWiinnddoowwssThe example is based on Windows XP. As to the examples for otheroperation systems, please refer to the similar steps or find supportnotes in www.draytek.com.Go to Control Panel and then double-click on Network Connections.1. Right-click on Local Area Connection and click on Properties.2. Select Internet Protocol (TCP/IP) and then click Properties.
Vigor2860 Series Quick Start Guide653. Select Obtain an IP address automatically and Obtain DNS serveraddress automatically.
Vigor2860 Series Quick Start Guide66FFoorr MMaacc OOSS1. Double click on the current used Mac OS on the desktop.2. Open the Application folder and get into Network.3. On the Network screen, select Using DHCP from the drop down list ofConfigure IPv4.
Vigor2860 Series Quick Start Guide67''))##----The default gateway IP address of the router is 192.168.1.1. For some reason,you might need to use “ping” command to check the link status of the router.The most important thing is that the computer will receive a reply from192.168.1.1. If not, please check the IP address of your computer. We suggestyou setting the network connection as get IP automatically. (Please refer to thesection 4.2)Please follow the steps below to ping the router correctly.FFoorr WWiinnddoowwss1. Open the Command Prompt window (from Start menu> Run).2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/2000/XP/Vista/7). The DOS command dialog will appear.3. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of“Reply from 192.168.1.1:bytes=32 time<1ms TTL=255” will appear.44.. If the line does not appear, please check the IP address setting of yourcomputer.FFoorr MMaacc OOSS ((TTeerrmmiinnaall))1. Double click on the current used Mac OS on the desktop.2. Open the Application folder and get into Utilities.3. Double click Terminal. The Terminal window will appear.4. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of“64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear.
Vigor2860 Series Quick Start Guide68 ''''))##))**++,,Open WAN >> Internet Access page and then check whether the ISP settingsare set correctly. Click Details Page of WAN1/WAN2/WAN3 to review thesettings that you configured previously.''..""//0011####,,00Sometimes, a wrong connection can be improved by returning to the defaultsettings. Try to reset the router by software or hardware..Warning: After pressing factory default setting, you will looseall settings you did before. Make sure you have recorded alluseful settings before you pressing. The password of factorydefault is null.
Vigor2860 Series Quick Start Guide69SSooffttwwaarree RReesseettYou can reset the router to factory default via Web page. Go to SystemMaintenance and choose Reboot System on the web page. The followingscreen will appear. Choose Using factory default configuration and clickReboot Now. After few seconds, the router will return all the settings to thefactory settings.HHaarrddwwaarree RReesseettWhile the router is running (ACT LED blinking), press the RST button and holdfor more than 5 seconds. When you see the ACT LED blinks rapidly, pleaserelease the button. Then, the router will restart with the default configuration.
Vigor2860 Series Quick Start Guide70After restore the factory default setting, you can configure the settings for therouter again to fit your personal request.''2211If the router still cannot work correctly after trying many efforts, please contactyour dealer for further help right away. For any questions, please feel free tosend e-mail to support@draytek.com.

Navigation menu