Draytek V2912N Dual-WAN Security Router User Manual QS Vigor2912 V1 0 for report

Draytek Corporation Dual-WAN Security Router QS Vigor2912 V1 0 for report

User manual

Vigor2912 Series Quick Start Guide i
Vigor2912 Series Quick Start Guide ii
Vigor2912 Series Quick Start Guide i Vigor2912 Series Dual-WAN Security Router Quick Start Guide Version: 1.0 Firmware Version: V3.7.1_RC4a (For future update, please visit DrayTek web site) Date: 20/06/2013
Vigor2912 Series Quick Start Guide ii Copyright Information Copyright Declarations Copyright 2013 All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. Trademarks The following trademarks are used in this document:  Microsoft is a registered trademark of Microsoft Corp.  Windows, Windows 95, 98, Me, NT, 2000, XP, 7 and Explorer are trademarks of Microsoft Corp.  Apple and Mac OS are registered trademarks of Apple Computer Inc.  Other products may be trademarks or registered trademarks of their respective manufacturers. Safety Instructions and Approval Safety Instructions  Read the installation guide thoroughly before you set up the router.  The router is a complicated electronic unit that may be repaired only be authorized and qualified personnel. Do not try to open or repair the router yourself.  Do not place the router in a damp or humid place, e.g. a bathroom.  Do not stack the routers.  The router should be used in a sheltered area, within a temperature range of +5 to +40 Celsius.  Do not expose the router to direct sunlight or other heat sources. The housing and electronic components may be damaged by direct sunlight or heat sources.  Do not deploy the cable for LAN connection outdoor to prevent electronic shock hazards.  Keep the package out of reach of children.  When you want to dispose of the router, please follow local regulations on conservation of the environment. Warranty We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. Be a Registered Owner Web registration is preferred. You can register your Vigor router via http://www.draytek.com. Firmware & Tools Updates Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. http://www.draytek.com
Vigor2912 Series Quick Start Guide iii European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, Hukou Township, Hsinchu Industrial Park, Hsinchu County, Taiwan 303 Product: Vigor2912 Series Router DrayTek Corp. declares that Vigor2912 Series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE 1999/5/EC, ErP 2009/125/EC and RoHS 2011/65/EU. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EEC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B. The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the requirements set forth in EN60950-1. This product is designed for the 2.4GHz WLAN network throughout the EC region. Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device may accept any interference received, including interference that may cause undesired operation. This equipment complies with RFCC radiation exposure limits set forth for an uncontrolled environment. The antenna/transmitter should be kept at least 20 cm away from human body. The user that changes or modifications not expressly approved by the party responsible for compliance, could void the user's authority to operate the equipment. Please visit http://www.draytek.com/user/SupportDLRTTECE.php
Vigor2912 Series Quick Start Guide iv
Vigor2912 Series Quick Start Guide v TTaabbllee ooff CCoonntteennttss 1. Introduction.......................................................................................1 1.1 Panel Explanation ...................................................................................... 2 1.1.1 For Vigor2912 ........................................................................................... 2 1.1.2 For Vigor2912n ......................................................................................... 4 1.2 Package Content ........................................................................................ 6 2. Installing Your Router.......................................................................7 2.1 Hardware Installation................................................................................. 7 2.2 Printer Installation...................................................................................... 8 3. Initial Settings..................................................................................15 3.1 Accessing Web Page ............................................................................... 15 3.2 Basic Configuration – Quick Start Wizard ............................................. 16 3.2.1 For WAN1/WAN2.................................................................................... 18 3.2.2 For WAN3 (USB)..................................................................................... 26 3.3 Wireless Configuration............................................................................ 28 3.3.1 Basic Wireless LAN Concept .................................................................. 28 3.3.2 General Setup......................................................................................... 29 3.3.3 Security Settings ..................................................................................... 30 4. Trouble Shooting ............................................................................33 4.1 Checking If the Hardware Status Is OK or Not....................................... 33 4.2 Checking If the Network Connection Settings on Your Computer Is OK or Not............................................................................................................... 34 4.3 Pinging the Router from Your Computer ............................................... 37 4.4 Checking If the ISP Settings are OK or Not ........................................... 38 4.5 Backing to Factory Default Setting If Necessary................................... 38 4.6 Contacting Your Dealer ........................................................................... 40
Vigor2912 Series Quick Start Guide vi
Vigor2912 Series Quick Start Guide 1 11.. IInnttrroodduuccttiioonn Vigor2912 series is a broadband router which integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth. By adopting hardware-based VPN platform and hardware encryption of AES/DES/3DES, and hardware key hash of SHA-1/MD5, the router increases the performance of VPN greatly and offers several protocols (such as IPSec/PPTP/L2TP) with up to 16 VPN tunnels. The object-based design used in SPI (Stateful Packet Inspection) firewall allows users to set firewall policy with ease. CSM (Content Security Management) provides users control and management in IM (Instant Messenger) and P2P (Peer to Peer) more efficiency than before. In addition, DoS/DDoS prevention and URL/Web content filter strengthen the security outside and control inside. Vigor2912 series supports USB interface for connecting USB printer to share printing function, 3G USB modem for network connection, or connectivity for network FTP service.
Vigor2912 Series Quick Start Guide 2 11..11 PPaanneell EExxppllaannaattiioonn 11..11..11 FFoorr VViiggoorr22991122 LED Status Explanation Blinking The router is powered on and running normally. ACT (Activity) Off The router is powered off. On The Web Content Filter is active. (It is enabled from Firewall >> General Setup). WCF Off The Web Content Filter is inactive. On The QoS function is active. QoS Off The QoS function is inactive. On The DoS/DDoS function is active. DoS Blinking It will blink while detecting an attack. On The port is connected. Off The port is disconnected. LAN (P4~P1) Blinking The data is transmitting. On Internet connection is ready. Off Internet connection is not ready. WAN(W2~W1) Blinking The data is transmitting. VPN On The VPN tunnel is active. On USB device is connected and ready for use. USB Blinking The data is transmitting.
Vigor2912 Series Quick Start Guide 3 Interface Description PWR Connecter for a power adapter. ON/OFF Power Switch. USB Connecter for a USB device (for 3G USB Modem or printer). W1~W2/P1 Connecter an ADSL or cable modem for accessing Internet (WAN). W2/P1~P4 Connecters for local network devices (LAN). Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.
Vigor2912 Series Quick Start Guide 4 11..11..22 FFoorr VViiggoorr22991122nn LED Status Explanation Blinking The router is powered on and running normally. ACT (Activity) Off The router is powered off. On The Web Content Filter is active. (It is enabled from Firewall >> General Setup). WCF Off The Web Content Filter is inactive. On The QoS function is active. QoS Off The QoS function is inactive. On Wireless access point is ready. WLAN Blinking It will blink slowly while wireless traffic goes through. ACT and WLAN LEDs blink quickly and simultaneously when WPS is working, and will return to normal condition after two minutes. (You need to setup WPS within 2 minutes.) On The port is connected. Off The port is disconnected. LAN (P4~P1) Blinking The data is transmitting. On Internet connection is ready. Off Internet connection is not ready. WAN(W2~W1) Blinking The data is transmitting. VPN On The VPN tunnel is active. On USB device is connected and ready for use. USB Blinking The data is transmitting.
Vigor2912 Series Quick Start Guide 5 Interface Description PWR Connecter for a power adapter. ON/OFF Power Switch. USB Connecter for a USB device (for 3G USB Modem or printer). W1~W2/P1 Connecter for local network devices or modem for accessing Internet (WAN). W2/P1~P4 Connecters for local network devices (LAN). Wireless LAN ON/OFF/WPS Press "Wireless LAN ON/OFF/WPS" button once to wait for client device making network connection through WPS. Press "Wireless LAN ON/OFF/WPS" button twice to enable (WLAN LED on) or disable (WLAN LED off) wireless connection. Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.
Vigor2912 Series Quick Start Guide 6 11..22 PPaacckkaaggee CCoonntteenntt Quick Start Guide CD  RJ-45 Cable (Ethernet)  Antenna (n models)  The type of the power adapter depends on the country that the router will be installed: UK-type Power Adapter EU-type Power Adapter USA/Taiwan-type Power Adapter AU/NZ-type Power Adapter * The maximum power consumption is 24 Watt.
Vigor2912 Series Quick Start Guide 7 22.. IInnssttaalllliinngg YYoouurr RRoouutteerr This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. 22..11 HHaarrddwwaarree IInnssttaallllaattiioonn Before starting to configure the router, you have to connect your devices correctly. 1. Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router with Ethernet cable (RJ-45). 2. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of the router and the other end of the cable (RJ-45) into the Ethernet port on your computer. 3. Connect one end of the power adapter to the router’s power port on the rear panel, and the other side into a wall outlet. 4. Power on the device by pressing down the power switch on the rear panel. 5. The system starts to initiate. After completing the system test, the ACT LED will light up and start blinking. (For the detailed information of LED status, please refer to section 1.1.)
Vigor2912 Series Quick Start Guide 8 22..22 PPrriinntteerr IInnssttaallllaattiioonn You can install a printer onto the router for sharing printing. All the PCs connected this router can print documents via the router. The example provided here is made based on Windows XP/2000. For Windows 98/SE/Vista, please visit www.draytek.com. Before using it, please follow the steps below to configure settings for connected computers (or wireless clients). 1. Connect the printer with the router through USB port. 2. Open Start->Settings-> Printers and Faxes. 3. Open File->Add a New Computer. A welcome dialog will appear. Please click Next.
Vigor2912 Series Quick Start Guide 9 4. Click Local printer attached to this computer and click Next.
Vigor2912 Series Quick Start Guide 105. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port. Click Next. 6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next.
Vigor2912 Series Quick Start Guide 117. Click Standard and choose Generic Network Card. 8. Then, in the following dialog, click Finish.
Vigor2912 Series Quick Start Guide 129. Now, your system will ask you to choose right name of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC. When you finish the selection, click Next. 10. For the final stage, you need to go back to Control Panel-> Printers and edit the property of the new printer you have added.
Vigor2912 Series Quick Start Guide 1311. Select "LPR" on Protocol, type p1 (number 1) as Queue Name. Then click OK. Next please refer to the red rectangle for choosing the correct protocol and LPR name. The printer can be used for printing now. Most of the printers with different manufacturers are compatible with vigor router. Note 1: Some printers with the fax/scanning or other additional functions are not supported. If you do not know whether your printer is supported or not, please visit www.draytek.com to find out the printer list. Open Support >FAQ/Application Notes; find out the link of USB>>Printer Server and click it.
Vigor2912 Series Quick Start Guide 14Then, click the What types of printers are compatible with Vigor router? link. Note 2: Vigor router supports printing request from computers via LAN ports but not WAN port.
Vigor2912 Series Quick Start Guide 1533.. IInniittiiaall SSeettttiinnggss To access Internet, please finish basic configuration after completing the hardware installation. 33..11 AAcccceessssiinngg WWeebb PPaaggee 1. Make sure your PC connects to the router correctly. Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of Vigor router 192.168.1.1. For the detailed information, please refer to the later section - Trouble Shooting of this manual. 2. Open a web browser on your PC and type http://192.168.1.1. The following window will be open to ask for username and password. Please type “admin/admin” on Username/Password and click Login. Notice: If you fail to access to the web configuration, please go to “Trouble Shooting” for detecting and solving your problem. 3. Now, the Main Screen will pop up.
Vigor2912 Series Quick Start Guide 164. The web page can be logged out according to the chosen condition. The default setting is Auto Logout, which means the web configuration system will logout after five minutes without any operation. Change the setting for your necessity. 33..22 BBaassiicc CCoonnffiigguurraattiioonn –– QQuuiicckk SSttaarrtt WWiizzaarrdd The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web User Interface. The home page will change slightly in accordance with the router model you have.
Vigor2912 Series Quick Start Guide 17If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickly. The first screen of Quick Start Wizard is entering login password. After typing the password, please click Next. On the next page as shown below, please select the WAN interface that you use. If Ethernet interface is used, please choose WAN1/WAN2; if 3G USB modem is used, please choose WAN3. Then click Next for next step. WAN1/WAN2 and WAN3 will bring up different configuration page. Refer to the following for detailed information.
Vigor2912 Series Quick Start Guide 1833..22..11 FFoorr WWAANN11//WWAANN22 WAN1/WAN2 is dedicated to physical mode in Ethernet. If you choose WAN1/WAN2, please specify physical type. Then, click Next. On the next page as shown below, please select the appropriate Internet access type according to the information from your ISP. For example, you should select PPPoE mode if the ISP provides you PPPoE interface. PPPPPPooEE 1. Choose WAN1/WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type.
Vigor2912 Series Quick Start Guide 192. Click PPPoE as the Internet Access Type. Then click Next to continue. 3. Please manually enter the Username/Password provided by your ISP. Click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
Vigor2912 Series Quick Start Guide 20PPPPTTPP//LL22TTPP 1. Choose WAN1/WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. 2. Click PPTP/L2TP as the Internet Access Type. Then click Next to continue.
Vigor2912 Series Quick Start Guide 213. Please type in the IP address/mask/gateway information originally provided by your ISP. Then click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
Vigor2912 Series Quick Start Guide 22SSttaattiicc IIPP 1. Choose WAN1/WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. 2. Click Static IP as the Internet Access type. Simply click Next to continue.
Vigor2912 Series Quick Start Guide 233. Please type in the IP address information originally provided by your ISP. Then click Next for next step. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
Vigor2912 Series Quick Start Guide 24DDHHCCPP 1. Choose WAN1/WAN2 as WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. 2. Click DHCP as the Internet Access type. Simply click Next to continue.
Vigor2912 Series Quick Start Guide 253. After finished the settings above, click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
Vigor2912 Series Quick Start Guide 2633..22..22 FFoorr WWAANN33 ((UUSSBB)) 1. Choose WAN3 as WAN Interface and click the Next button. 2. In the following page, fill in the information for 3G/4G USB Modem.
Vigor2912 Series Quick Start Guide 273. Then, click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
Vigor2912 Series Quick Start Guide 2833..33 WWiirreelleessss CCoonnffiigguurraattiioonn  For the user of Vigor2912, please skip this section. For operating Vigor2912n well, it is necessary for you to set the wireless LAN settings for using wireless function. Please read the following section carefully for configuring the settings for this router. (The default value of Frequency Domain was set by factory depends on the reselling region.) 33..33..11 BBaassiicc WWiirreelleessss LLAANN CCoonncceepptt In an Infrastructure Mode of wireless network, Vigor wireless router plays a role as an Access Point (AP) connecting to lots of wireless clients or Stations (STA). All the STAs (clients) will share the same Internet connection with other wired hosts via Vigor wireless router.
Vigor2912 Series Quick Start Guide 2933..33..22 GGeenneerraall SSeettuupp 1. On the Wireless LAN group, select General Setup. The following page will be shown. 2. Check Enable Wireless LAN to enable the wireless function. 3. At present, the router can connect to 11n Only, 11g Only, Mixed (11b+11g), Mixed (11a+11n), Mixed (11g+11n), and Mixed (11b+11g+11n) stations simultaneously. Simply choose Mixed (11b+11g+11n) mode. 4. Type in the name of the SSID. The default name for SSID is DrayTek. We suggest you to change it with a particular name. 5. Click OK to save the configuration.
Vigor2912 Series Quick Start Guide 3033..33..33 SSeeccuurriittyy SSeettttiinnggss 1. On the Wireless LAN group, select Security. 2. The default security mode is Mixed (WPA+WPA2)/PSK. For the wireless client who wants to access into Internet through such router, please input the default PSK value for connection. Default Pre-Shared Key (PSK) with 13 ASCII characters is provided and stated on the label pasted on the bottom of the router.
Vigor2912 Series Quick Start Guide 313. Click OK to save settings. Be aware that for the communication, all wireless devices must support the same encryption bit length and share the same key. If WEP mode is selected, only one of four preset keys can be selected at one time.
Vigor2912 Series Quick Start Guide 32 This page is left blank.
Vigor2912 Series Quick Start Guide 3344.. TTrroouubbllee SShhoooottiinngg This section will guide you to solve abnormal situations if you cannot access into the Internet after installing the router and finishing the web configuration. Please follow sections below to check your basic installation status stage by stage.  Checking if the hardware status is OK or not.  Checking if the network connection settings on your computer are OK or not.  Pinging the router from your computer.  Checking if the ISP settings are OK or not.  Backing to factory default setting if necessary. If all above stages are done and the router still cannot run normally, it is the time for you to contact your dealer for advanced help. 44..11 CChheecckkiinngg IIff tthhee HHaarrddwwaarree SSttaattuuss IIss OOKK oorr NNoott Follow the steps below to verify the hardware status. 1. Check the power line and LAN cable connections. Refer to “2.1 Hardware Installation” for details. 2. Turn on the router. Make sure the ACT LED blink once per second and the correspondent LAN LED is bright. 3. If not, it means that there is something wrong with the hardware status. Simply back to “2.1 Hardware Installation” to execute the hardware installation again. And then, try again.
Vigor2912 Series Quick Start Guide 3444..22 CChheecckkiinngg IIff tthhee NNeettwwoorrkk CCoonnnneeccttiioonn SSeettttiinnggss oonn YYoouurr CCoommppuutteerr IIss OOKK oorr NNoott Sometimes the link failure occurs due to the wrong network connection settings. After trying the above section, if the link is stilled failed, please do the steps listed below to make sure the network connection settings is OK. FFoorr WWiinnddoowwss  The example is based on Windows XP. As to the examples for other operation systems, please refer to the similar steps or find support notes in www.draytek.com. Go to Control Panel and then double-click on Network Connections. 1. Right-click on Local Area Connection and click on Properties.
Vigor2912 Series Quick Start Guide 352. Select Internet Protocol (TCP/IP) and then click Properties. 3. Select Obtain an IP address automatically and Obtain DNS server address automatically.
Vigor2912 Series Quick Start Guide 36FFoorr MMaacc OOSS 1. Double click on the current used Mac OS on the desktop. 2. Open the Application folder and get into Network. 3. On the Network screen, select Using DHCP from the drop down list of Configure IPv4.
Vigor2912 Series Quick Start Guide 3744..33 PPiinnggiinngg tthhee RRoouutteerr ffrroomm YYoouurr CCoommppuutteerr The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to use “ping” command to check the link status of the router. The most important thing is that the computer will receive a reply from 192.168.1.1. If not, please check the IP address of your computer. We suggest you setting the network connection as get IP automatically. (Please refer to the section 4.2) Please follow the steps below to ping the router correctly. FFoorr WWiinnddoowwss 1. Open the Command Prompt window (from Start menu> Run). 2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/ 2000/XP/Vista/7). The DOS command dialog will appear. 3. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “Reply from 192.168.1.1:bytes=32 time<1ms TTL=255” will appear. 4. If the line does not appear, please check the IP address setting of your computer. FFoorr MMaacc OOSS ((TTeerrmmiinnaall)) 1. Double click on the current used Mac OS on the desktop. 2. Open the Application folder and get into Utilities. 3. Double click Terminal. The Terminal window will appear. 4. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear.
Vigor2912 Series Quick Start Guide 38 44..44 CChheecckkiinngg IIff tthhee IISSPP SSeettttiinnggss aarree OOKK oorr NNoott Open WAN >> Internet Access page and then check whether the ISP settings are set correctly. Click Details Page of WAN1/WAN2/WAN3 to review the settings that you configured previously. 44..55 BBaacckkiinngg ttoo FFaaccttoorryy DDeeffaauulltt SSeettttiinngg IIff NNeecceessssaarryy Sometimes, a wrong connection can be improved by returning to the default settings. Try to reset the router by software or hardware.. Warning: After pressing factory default setting, you will loose all settings you did before. Make sure you have recorded all useful settings before you pressing.
Vigor2912 Series Quick Start Guide 39SSooffttwwaarree RReesseett You can reset the router to factory default via Web page. Go to System Maintenance and choose Reboot System on the web page. The following screen will appear. Choose Using factory default configuration and click Reboot Now. After few seconds, the router will return all the settings to the factory settings. HHaarrddwwaarree RReesseett While the router is running (ACT LED blinking), press the RST button and hold for more than 5 seconds. When you see the ACT LED blinks rapidly, please release the button. Then, the router will restart with the default configuration.
Vigor2912 Series Quick Start Guide 40After restore the factory default setting, you can configure the settings for the router again to fit your personal request. 44..66 CCoonnttaaccttiinngg YYoouurr DDeeaalleerr If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com.

Navigation menu