User Manual
NFC PAD (DE-632) Product specification DUALi Inc. Document Version: 1.00 Last Revised Date: 14th JAN. 2014 Copyright ⓒ 2014 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights. NFC PAD Specification DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products. In addition, DUALi assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by DUALi. Composition of the information in this manual has been done to the best of our knowledge. DUALi does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below; Tel: +82 31 213 0074 e-mail : sales@duali.com FeliCa™ is registered trademark of SONY Corporation. Mifare® is registered trademarks of NXP Semiconductors ㈜듀얼아이 2/12 NFC PAD Specification Revision History 2014.01.14 (Ver. 1.0) : First release ㈜듀얼아이 3/12 NFC PAD Specification CONTENTS INTRODUCTION ..............................................................................................................................5 1.1 PRODUCT SPECIFICATION ..............................................................................................................5 1.2 RF PART SPECIFICATION .............................................................................................................6 1.3 SAM PART SPECIFICATION ..........................................................................................................6 STRUCTURE .....................................................................................................................................7 2.1 COMPONENTS CONFIRMATION ......................................................................................................7 2.2 THE BLOCK DIAGRAM OF NFC PAD........................오류! 책갈피가 정의되어 있지 않습니다. 2.3 DESCRIPTION .................................................................................................................................7 EXTERIOR.........................................................................................................................................8 3.1 PRODUCT EXTERIOR ......................................................................................................................8 3.2 PRODUCT DIMENSION ....................................................................................................................8 POWER & INTERFACE SPECIFICATION..................................................................................9 4.1 POWER SPECIFICATION..................................................................................................................9 4.2 CURRENT CONSUMPTION ...............................................................................................................9 4.3 COMMUNICATION SPECIFICATION .................................................................................................9 FUNCTIONS ....................................................................................................................................10 5.1 CARD DETECTION ........................................................................................................................10 5.2 FIRMWARE DOWNLOAD FUNCTION ..............................................................................................10 5.3 OPERATION .................................................................................................................................10 5.4 STORAGE .....................................................................................................................................10 WARNING AND NOTICE..............................................................................................................11 WARRANTY & SERVICE .............................................................................................................12 ㈜듀얼아이 4/12 NFC PAD Specification 1 Introduction NFC PAD is contactless reader meets high security requirement and the latest contactless standard. It supports Mastercard® Paypass, Visa ® Paywave with contactless EMV complaint. Up to 8SAMs (Secure Access Modules) come standard for payment system. Also it gives user multiple connectivity such as USB, RS-232 & TCP/IP (option). It is adopted secure communication comply with Master & Visa. 1.1 Product specification ITEM CPU Program Memory Specification STM32F103ZGT6 (ARM Cortex_M3, 144pin) Note ST 1MBytes FLASH Up to 32Mbytes external Serial Flash (Default : 1Mbytes) Data Memory 96KBytes SRAM Up to 4Mbytes external PSRAM (Default : 96Kbytes) DISPLAY 4 Status LED (RED, BLUE, YELLOW, GREEN) 4 color 128*96 Graphic LCD (Yellow green ) Communication MINI USB 2.0 Full speed RS-232 TCP/IP(option) BUZZER Magnetic Buzzer Contactless card ISO 14443 A/B, Reading Distance : Maximum 5cm SAM Input Voltage Class A,B, T=0,T=1 8 SAM SLOT Adapter DC 5V ㈜듀얼아이 5/12 NFC PAD Specification 1.2 RF PART Specification ITEM Radio frequency Comm. speed Subcarrier Input Power Specification Note 13.56MHz PN512 106,212,424 Kbps EMV certification -106Kbps only 847 KHz 5V 1.3 SAM PART Specification ITEM Protocol Class Quantity Specification Note T=0,T=1 class A,B (5V, 3V) ㈜듀얼아이 6/12 NFC PAD Specification 2 Structure 2.1 Components Confirmation - NFC PAD - Comm.cable (RS-232 Cable or USB Cable) * 5V AC adapter (option) 2.2 Description - MAIN MCU : STM32F103ZGT6 (ARM Cortex_M3, 144pin), 1Mbyts Flash, 96Kbytes SRAM RTC : included in LCD. Battery : Provides backup power RTC and secure memory while power is off. RF field : Adopt PN512 chip which supports ISO 14443 A/B Debug port : USB endpoint0 vendor protocol Host interface: USB, RS-232, TCP/IP(option) Buzzer : Max 94dBA, magnetic buzzer Status LED : 4 status LED comply with EMV. Power : Use DC5V adopter of USB(LCD brightness is weaker than adaptor). Tamer switch : When case is opened by force, it disconnect backup power for security reason. LCD: 128*96 graphic LCD. Touch panel: Resistive touch panel SAM: 8 x SAM slots(ISO7816) comm. Speed up to 153600bps Memory extension: designed to extend program& data memory up to 32Mbytes & 4Mbytes. ㈜듀얼아이 7/12 NFC PAD Specification 3 Exterior 3.1 Product exterior 3.2 Product dimension 125mm*90mm*27mm ㈜듀얼아이 8/12 NFC PAD Specification 4 Power & Interface Specification 4.1 Power Specification DC 5V input(recommendable), USB 5V power supply(brightness is little weaker than DC 5V Adaptor) Power usage: under 2W 4.2 Current consumption Default : 5V, under 200mA MAX : 5V, under 400mA (card read/write) 4.3 Communication Specification USB 2.0 FULL SPEED (12Mbps) RS-232 (115200bps) TCP/IP(option) ㈜듀얼아이 9/12 NFC PAD Specification 5 Functions 5.1 Card detection Comply with EMV PCD level 1 5.2 Firmware download function Downloadable via PC program(DeDownloader)Usage environment 5.3 Operation Temperature: -10 ~ 60 ℃ Humidity : 30 ~ 90 % (relative humidity) 5.4 Storage Temperature: -20 ~ 80 ℃ Humidity: 30 ~ 90 % (relative humidity) ㈜듀얼아이 10/12 NFC PAD Specification 6 Warning and Notice For indoor use only. This product is affected by an element like metal or Magnetism. So one has to take precautions. This device is not waterproof. Recommended to use certified (UL/CE/FCC) adaptor. Recommended to use apart from metallic devices to maximize RF reading performance. EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC STATEMENT CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. ㈜듀얼아이 11/12 NFC PAD Specification 7 Warranty & Service Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-632, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include any shipping charges. The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component. - Fault by the unqualified user’s own intention of repairs. - Product’s inspection requirement. - Adding certain functions or extension of system. - Fault by User’s misuse against the product’s manual. *Please contact our service team for the technical/ sales supports. DUALi Inc. 1-308/310 Innoplex, 552 Wonchoen-dong, Youngtong-gu, Suwon, Gyeonggi-do, Korea (zip: 443-380) Tel : +82 31-213-0074 Fax : +82 31-213-0078 E-mail : lab@duali.com Web-site : http://www.duali.com ㈜듀얼아이 12/12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author :EXIF Metadata provided by EXIF.toolsCreate Date : 2014:08:22 13:28:37+09:00 Modify Date : 2014:08:22 13:28:37+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : Title : Microsoft Word - DE-632_Specification_140106__eng_수정_140822_.doc Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.5.5 (Windows) Document ID : uuid:d0afe8ce-5e7e-4f96-b9aa-438d7528b81f Instance ID : uuid:bb346d1e-7492-4924-a1bd-9cd61a94080c Page Count : 12